a4f08be08e
The AR9130 is an AR9160/AR5416 family WMAC which is glued directly to the AR913x SoC peripheral bus (APB) rather than via a PCI/PCIe bridge. The specifics: * A new build option is required to use the AR9130 - AH_SUPPORT_AR9130. This is needed due to the different location the RTC registers live with this chip; hopefully this will be undone in the future. This does currently mean that enabling this option will break non-AR9130 builds, so don't enable it unless you're specifically building an image for the AR913x SoC. * Add the new probe, attach, EEPROM and PLL methods specific to Howl. * Add a work-around to ah_eeprom_v14.c which disables some of the checks for endian-ness and magic in the EEPROM image if an eepromdata block is provided. This'll be fixed at a later stage by porting the ath9k probe code and making sure it doesn't break in other setups (which my previous attempt at this did.) * Sprinkle Howl modifications throughput the interrupt path - it doesn't implement the SYNC interrupt registers, so ignore those. * Sprinkle Howl chip powerup/down throughout the reset path; the RTC methods were * Sprinkle some other Howl workarounds in the reset path. * Hard-code an alternative setup for the AR_CFG register for Howl, that sets up things suitable for Big-Endian MIPS (which is the only platform this chip is glued to.) This has been tested on the AR913x based TP-Link WR-1043nd mode, in legacy, HT/20 and HT/40 modes. Caveats: * 2ghz has only been tested. I've not seen any 5ghz radios glued to this chipset so I can't test it. * AR5416_INTERRUPT_MITIGATION is not supported on the AR9130. At least, it isn't implemented in ath9k. Please don't enable this. * This hasn't been tested in MBSS mode or in RX/TX block-aggregation mode.
1188 lines
34 KiB
C
1188 lines
34 KiB
C
/*
|
|
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2002-2008 Atheros Communications, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
#include "opt_ah.h"
|
|
|
|
#include "ah.h"
|
|
#include "ah_internal.h"
|
|
#include "ah_devid.h"
|
|
#include "ah_eeprom.h" /* for 5ghz fast clock flag */
|
|
|
|
#include "ar5416/ar5416reg.h" /* NB: includes ar5212reg.h */
|
|
|
|
/* linker set of registered chips */
|
|
OS_SET_DECLARE(ah_chips, struct ath_hal_chip);
|
|
|
|
/*
|
|
* Check the set of registered chips to see if any recognize
|
|
* the device as one they can support.
|
|
*/
|
|
const char*
|
|
ath_hal_probe(uint16_t vendorid, uint16_t devid)
|
|
{
|
|
struct ath_hal_chip * const *pchip;
|
|
|
|
OS_SET_FOREACH(pchip, ah_chips) {
|
|
const char *name = (*pchip)->probe(vendorid, devid);
|
|
if (name != AH_NULL)
|
|
return name;
|
|
}
|
|
return AH_NULL;
|
|
}
|
|
|
|
/*
|
|
* Attach detects device chip revisions, initializes the hwLayer
|
|
* function list, reads EEPROM information,
|
|
* selects reset vectors, and performs a short self test.
|
|
* Any failures will return an error that should cause a hardware
|
|
* disable.
|
|
*/
|
|
struct ath_hal*
|
|
ath_hal_attach(uint16_t devid, HAL_SOFTC sc,
|
|
HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata, HAL_STATUS *error)
|
|
{
|
|
struct ath_hal_chip * const *pchip;
|
|
|
|
OS_SET_FOREACH(pchip, ah_chips) {
|
|
struct ath_hal_chip *chip = *pchip;
|
|
struct ath_hal *ah;
|
|
|
|
/* XXX don't have vendorid, assume atheros one works */
|
|
if (chip->probe(ATHEROS_VENDOR_ID, devid) == AH_NULL)
|
|
continue;
|
|
ah = chip->attach(devid, sc, st, sh, eepromdata, error);
|
|
if (ah != AH_NULL) {
|
|
/* copy back private state to public area */
|
|
ah->ah_devid = AH_PRIVATE(ah)->ah_devid;
|
|
ah->ah_subvendorid = AH_PRIVATE(ah)->ah_subvendorid;
|
|
ah->ah_macVersion = AH_PRIVATE(ah)->ah_macVersion;
|
|
ah->ah_macRev = AH_PRIVATE(ah)->ah_macRev;
|
|
ah->ah_phyRev = AH_PRIVATE(ah)->ah_phyRev;
|
|
ah->ah_analog5GhzRev = AH_PRIVATE(ah)->ah_analog5GhzRev;
|
|
ah->ah_analog2GhzRev = AH_PRIVATE(ah)->ah_analog2GhzRev;
|
|
return ah;
|
|
}
|
|
}
|
|
return AH_NULL;
|
|
}
|
|
|
|
const char *
|
|
ath_hal_mac_name(struct ath_hal *ah)
|
|
{
|
|
switch (ah->ah_macVersion) {
|
|
case AR_SREV_VERSION_CRETE:
|
|
case AR_SREV_VERSION_MAUI_1:
|
|
return "5210";
|
|
case AR_SREV_VERSION_MAUI_2:
|
|
case AR_SREV_VERSION_OAHU:
|
|
return "5211";
|
|
case AR_SREV_VERSION_VENICE:
|
|
return "5212";
|
|
case AR_SREV_VERSION_GRIFFIN:
|
|
return "2413";
|
|
case AR_SREV_VERSION_CONDOR:
|
|
return "5424";
|
|
case AR_SREV_VERSION_EAGLE:
|
|
return "5413";
|
|
case AR_SREV_VERSION_COBRA:
|
|
return "2415";
|
|
case AR_SREV_2425:
|
|
return "2425";
|
|
case AR_SREV_2417:
|
|
return "2417";
|
|
case AR_XSREV_VERSION_OWL_PCI:
|
|
return "5416";
|
|
case AR_XSREV_VERSION_OWL_PCIE:
|
|
return "5418";
|
|
case AR_XSREV_VERSION_HOWL:
|
|
return "9130";
|
|
case AR_XSREV_VERSION_SOWL:
|
|
return "9160";
|
|
case AR_XSREV_VERSION_MERLIN:
|
|
return "9280";
|
|
case AR_XSREV_VERSION_KITE:
|
|
return "9285";
|
|
}
|
|
return "????";
|
|
}
|
|
|
|
/*
|
|
* Return the mask of available modes based on the hardware capabilities.
|
|
*/
|
|
u_int
|
|
ath_hal_getwirelessmodes(struct ath_hal*ah)
|
|
{
|
|
return ath_hal_getWirelessModes(ah);
|
|
}
|
|
|
|
/* linker set of registered RF backends */
|
|
OS_SET_DECLARE(ah_rfs, struct ath_hal_rf);
|
|
|
|
/*
|
|
* Check the set of registered RF backends to see if
|
|
* any recognize the device as one they can support.
|
|
*/
|
|
struct ath_hal_rf *
|
|
ath_hal_rfprobe(struct ath_hal *ah, HAL_STATUS *ecode)
|
|
{
|
|
struct ath_hal_rf * const *prf;
|
|
|
|
OS_SET_FOREACH(prf, ah_rfs) {
|
|
struct ath_hal_rf *rf = *prf;
|
|
if (rf->probe(ah))
|
|
return rf;
|
|
}
|
|
*ecode = HAL_ENOTSUPP;
|
|
return AH_NULL;
|
|
}
|
|
|
|
const char *
|
|
ath_hal_rf_name(struct ath_hal *ah)
|
|
{
|
|
switch (ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) {
|
|
case 0: /* 5210 */
|
|
return "5110"; /* NB: made up */
|
|
case AR_RAD5111_SREV_MAJOR:
|
|
case AR_RAD5111_SREV_PROD:
|
|
return "5111";
|
|
case AR_RAD2111_SREV_MAJOR:
|
|
return "2111";
|
|
case AR_RAD5112_SREV_MAJOR:
|
|
case AR_RAD5112_SREV_2_0:
|
|
case AR_RAD5112_SREV_2_1:
|
|
return "5112";
|
|
case AR_RAD2112_SREV_MAJOR:
|
|
case AR_RAD2112_SREV_2_0:
|
|
case AR_RAD2112_SREV_2_1:
|
|
return "2112";
|
|
case AR_RAD2413_SREV_MAJOR:
|
|
return "2413";
|
|
case AR_RAD5413_SREV_MAJOR:
|
|
return "5413";
|
|
case AR_RAD2316_SREV_MAJOR:
|
|
return "2316";
|
|
case AR_RAD2317_SREV_MAJOR:
|
|
return "2317";
|
|
case AR_RAD5424_SREV_MAJOR:
|
|
return "5424";
|
|
|
|
case AR_RAD5133_SREV_MAJOR:
|
|
return "5133";
|
|
case AR_RAD2133_SREV_MAJOR:
|
|
return "2133";
|
|
case AR_RAD5122_SREV_MAJOR:
|
|
return "5122";
|
|
case AR_RAD2122_SREV_MAJOR:
|
|
return "2122";
|
|
}
|
|
return "????";
|
|
}
|
|
|
|
/*
|
|
* Poll the register looking for a specific value.
|
|
*/
|
|
HAL_BOOL
|
|
ath_hal_wait(struct ath_hal *ah, u_int reg, uint32_t mask, uint32_t val)
|
|
{
|
|
#define AH_TIMEOUT 1000
|
|
return ath_hal_waitfor(ah, reg, mask, val, AH_TIMEOUT);
|
|
#undef AH_TIMEOUT
|
|
}
|
|
|
|
HAL_BOOL
|
|
ath_hal_waitfor(struct ath_hal *ah, u_int reg, uint32_t mask, uint32_t val, uint32_t timeout)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < timeout; i++) {
|
|
if ((OS_REG_READ(ah, reg) & mask) == val)
|
|
return AH_TRUE;
|
|
OS_DELAY(10);
|
|
}
|
|
HALDEBUG(ah, HAL_DEBUG_REGIO | HAL_DEBUG_PHYIO,
|
|
"%s: timeout on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
|
|
__func__, reg, OS_REG_READ(ah, reg), mask, val);
|
|
return AH_FALSE;
|
|
}
|
|
|
|
/*
|
|
* Reverse the bits starting at the low bit for a value of
|
|
* bit_count in size
|
|
*/
|
|
uint32_t
|
|
ath_hal_reverseBits(uint32_t val, uint32_t n)
|
|
{
|
|
uint32_t retval;
|
|
int i;
|
|
|
|
for (i = 0, retval = 0; i < n; i++) {
|
|
retval = (retval << 1) | (val & 1);
|
|
val >>= 1;
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/* 802.11n related timing definitions */
|
|
|
|
#define OFDM_PLCP_BITS 22
|
|
#define HT_L_STF 8
|
|
#define HT_L_LTF 8
|
|
#define HT_L_SIG 4
|
|
#define HT_SIG 8
|
|
#define HT_STF 4
|
|
#define HT_LTF(n) ((n) * 4)
|
|
|
|
#define HT_RC_2_MCS(_rc) ((_rc) & 0xf)
|
|
#define HT_RC_2_STREAMS(_rc) ((((_rc) & 0x78) >> 3) + 1)
|
|
#define IS_HT_RATE(_rc) ( (_rc) & IEEE80211_RATE_MCS)
|
|
|
|
/*
|
|
* Calculate the duration of a packet whether it is 11n or legacy.
|
|
*/
|
|
uint32_t
|
|
ath_hal_pkt_txtime(struct ath_hal *ah, const HAL_RATE_TABLE *rates, uint32_t frameLen,
|
|
uint16_t rateix, HAL_BOOL isht40, HAL_BOOL shortPreamble)
|
|
{
|
|
uint8_t rc;
|
|
int numStreams;
|
|
|
|
rc = rates->info[rateix].rateCode;
|
|
|
|
/* Legacy rate? Return the old way */
|
|
if (! IS_HT_RATE(rc))
|
|
return ath_hal_computetxtime(ah, rates, frameLen, rateix, shortPreamble);
|
|
|
|
/* 11n frame - extract out the number of spatial streams */
|
|
numStreams = HT_RC_2_STREAMS(rc);
|
|
KASSERT(numStreams == 1 || numStreams == 2, ("number of spatial streams needs to be 1 or 2: MCS rate 0x%x!", rateix));
|
|
|
|
return ath_computedur_ht(frameLen, rc, numStreams, isht40, shortPreamble);
|
|
}
|
|
|
|
/*
|
|
* Calculate the transmit duration of an 11n frame.
|
|
* This only works for MCS0->MCS15.
|
|
*/
|
|
uint32_t
|
|
ath_computedur_ht(uint32_t frameLen, uint16_t rate, int streams, HAL_BOOL isht40,
|
|
HAL_BOOL isShortGI)
|
|
{
|
|
static const uint16_t ht20_bps[16] = {
|
|
26, 52, 78, 104, 156, 208, 234, 260,
|
|
52, 104, 156, 208, 312, 416, 468, 520
|
|
};
|
|
static const uint16_t ht40_bps[16] = {
|
|
54, 108, 162, 216, 324, 432, 486, 540,
|
|
108, 216, 324, 432, 648, 864, 972, 1080,
|
|
};
|
|
uint32_t bitsPerSymbol, numBits, numSymbols, txTime;
|
|
|
|
KASSERT(rate & IEEE80211_RATE_MCS, ("not mcs %d", rate));
|
|
KASSERT((rate &~ IEEE80211_RATE_MCS) < 16, ("bad mcs 0x%x", rate));
|
|
|
|
if (isht40)
|
|
bitsPerSymbol = ht40_bps[rate & 0xf];
|
|
else
|
|
bitsPerSymbol = ht20_bps[rate & 0xf];
|
|
numBits = OFDM_PLCP_BITS + (frameLen << 3);
|
|
numSymbols = howmany(numBits, bitsPerSymbol);
|
|
if (isShortGI)
|
|
txTime = ((numSymbols * 18) + 4) / 5; /* 3.6us */
|
|
else
|
|
txTime = numSymbols * 4; /* 4us */
|
|
return txTime + HT_L_STF + HT_L_LTF +
|
|
HT_L_SIG + HT_SIG + HT_STF + HT_LTF(streams);
|
|
}
|
|
|
|
/*
|
|
* Compute the time to transmit a frame of length frameLen bytes
|
|
* using the specified rate, phy, and short preamble setting.
|
|
*/
|
|
uint16_t
|
|
ath_hal_computetxtime(struct ath_hal *ah,
|
|
const HAL_RATE_TABLE *rates, uint32_t frameLen, uint16_t rateix,
|
|
HAL_BOOL shortPreamble)
|
|
{
|
|
uint32_t bitsPerSymbol, numBits, numSymbols, phyTime, txTime;
|
|
uint32_t kbps;
|
|
|
|
/* Warn if this function is called for 11n rates; it should not be! */
|
|
if (IS_HT_RATE(rates->info[rateix].rateCode))
|
|
ath_hal_printf(ah, "%s: MCS rate? (index %d; hwrate 0x%x)\n",
|
|
__func__, rateix, rates->info[rateix].rateCode);
|
|
|
|
kbps = rates->info[rateix].rateKbps;
|
|
/*
|
|
* index can be invalid duting dynamic Turbo transitions.
|
|
* XXX
|
|
*/
|
|
if (kbps == 0)
|
|
return 0;
|
|
switch (rates->info[rateix].phy) {
|
|
case IEEE80211_T_CCK:
|
|
phyTime = CCK_PREAMBLE_BITS + CCK_PLCP_BITS;
|
|
if (shortPreamble && rates->info[rateix].shortPreamble)
|
|
phyTime >>= 1;
|
|
numBits = frameLen << 3;
|
|
txTime = CCK_SIFS_TIME + phyTime
|
|
+ ((numBits * 1000)/kbps);
|
|
break;
|
|
case IEEE80211_T_OFDM:
|
|
bitsPerSymbol = (kbps * OFDM_SYMBOL_TIME) / 1000;
|
|
HALASSERT(bitsPerSymbol != 0);
|
|
|
|
numBits = OFDM_PLCP_BITS + (frameLen << 3);
|
|
numSymbols = howmany(numBits, bitsPerSymbol);
|
|
txTime = OFDM_SIFS_TIME
|
|
+ OFDM_PREAMBLE_TIME
|
|
+ (numSymbols * OFDM_SYMBOL_TIME);
|
|
break;
|
|
case IEEE80211_T_OFDM_HALF:
|
|
bitsPerSymbol = (kbps * OFDM_HALF_SYMBOL_TIME) / 1000;
|
|
HALASSERT(bitsPerSymbol != 0);
|
|
|
|
numBits = OFDM_HALF_PLCP_BITS + (frameLen << 3);
|
|
numSymbols = howmany(numBits, bitsPerSymbol);
|
|
txTime = OFDM_HALF_SIFS_TIME
|
|
+ OFDM_HALF_PREAMBLE_TIME
|
|
+ (numSymbols * OFDM_HALF_SYMBOL_TIME);
|
|
break;
|
|
case IEEE80211_T_OFDM_QUARTER:
|
|
bitsPerSymbol = (kbps * OFDM_QUARTER_SYMBOL_TIME) / 1000;
|
|
HALASSERT(bitsPerSymbol != 0);
|
|
|
|
numBits = OFDM_QUARTER_PLCP_BITS + (frameLen << 3);
|
|
numSymbols = howmany(numBits, bitsPerSymbol);
|
|
txTime = OFDM_QUARTER_SIFS_TIME
|
|
+ OFDM_QUARTER_PREAMBLE_TIME
|
|
+ (numSymbols * OFDM_QUARTER_SYMBOL_TIME);
|
|
break;
|
|
case IEEE80211_T_TURBO:
|
|
bitsPerSymbol = (kbps * TURBO_SYMBOL_TIME) / 1000;
|
|
HALASSERT(bitsPerSymbol != 0);
|
|
|
|
numBits = TURBO_PLCP_BITS + (frameLen << 3);
|
|
numSymbols = howmany(numBits, bitsPerSymbol);
|
|
txTime = TURBO_SIFS_TIME
|
|
+ TURBO_PREAMBLE_TIME
|
|
+ (numSymbols * TURBO_SYMBOL_TIME);
|
|
break;
|
|
default:
|
|
HALDEBUG(ah, HAL_DEBUG_PHYIO,
|
|
"%s: unknown phy %u (rate ix %u)\n",
|
|
__func__, rates->info[rateix].phy, rateix);
|
|
txTime = 0;
|
|
break;
|
|
}
|
|
return txTime;
|
|
}
|
|
|
|
typedef enum {
|
|
WIRELESS_MODE_11a = 0,
|
|
WIRELESS_MODE_TURBO = 1,
|
|
WIRELESS_MODE_11b = 2,
|
|
WIRELESS_MODE_11g = 3,
|
|
WIRELESS_MODE_108g = 4,
|
|
|
|
WIRELESS_MODE_MAX
|
|
} WIRELESS_MODE;
|
|
|
|
static WIRELESS_MODE
|
|
ath_hal_chan2wmode(struct ath_hal *ah, const struct ieee80211_channel *chan)
|
|
{
|
|
if (IEEE80211_IS_CHAN_B(chan))
|
|
return WIRELESS_MODE_11b;
|
|
if (IEEE80211_IS_CHAN_G(chan))
|
|
return WIRELESS_MODE_11g;
|
|
if (IEEE80211_IS_CHAN_108G(chan))
|
|
return WIRELESS_MODE_108g;
|
|
if (IEEE80211_IS_CHAN_TURBO(chan))
|
|
return WIRELESS_MODE_TURBO;
|
|
return WIRELESS_MODE_11a;
|
|
}
|
|
|
|
/*
|
|
* Convert between microseconds and core system clocks.
|
|
*/
|
|
/* 11a Turbo 11b 11g 108g */
|
|
static const uint8_t CLOCK_RATE[] = { 40, 80, 22, 44, 88 };
|
|
|
|
#define CLOCK_FAST_RATE_5GHZ_OFDM 44
|
|
|
|
u_int
|
|
ath_hal_mac_clks(struct ath_hal *ah, u_int usecs)
|
|
{
|
|
const struct ieee80211_channel *c = AH_PRIVATE(ah)->ah_curchan;
|
|
u_int clks;
|
|
|
|
/* NB: ah_curchan may be null when called attach time */
|
|
/* XXX merlin and later specific workaround - 5ghz fast clock is 44 */
|
|
if (c != AH_NULL && IS_5GHZ_FAST_CLOCK_EN(ah, c)) {
|
|
clks = usecs * CLOCK_FAST_RATE_5GHZ_OFDM;
|
|
if (IEEE80211_IS_CHAN_HT40(c))
|
|
clks <<= 1;
|
|
} else if (c != AH_NULL) {
|
|
clks = usecs * CLOCK_RATE[ath_hal_chan2wmode(ah, c)];
|
|
if (IEEE80211_IS_CHAN_HT40(c))
|
|
clks <<= 1;
|
|
} else
|
|
clks = usecs * CLOCK_RATE[WIRELESS_MODE_11b];
|
|
return clks;
|
|
}
|
|
|
|
u_int
|
|
ath_hal_mac_usec(struct ath_hal *ah, u_int clks)
|
|
{
|
|
const struct ieee80211_channel *c = AH_PRIVATE(ah)->ah_curchan;
|
|
u_int usec;
|
|
|
|
/* NB: ah_curchan may be null when called attach time */
|
|
/* XXX merlin and later specific workaround - 5ghz fast clock is 44 */
|
|
if (c != AH_NULL && IS_5GHZ_FAST_CLOCK_EN(ah, c)) {
|
|
usec = clks / CLOCK_FAST_RATE_5GHZ_OFDM;
|
|
if (IEEE80211_IS_CHAN_HT40(c))
|
|
usec >>= 1;
|
|
} else if (c != AH_NULL) {
|
|
usec = clks / CLOCK_RATE[ath_hal_chan2wmode(ah, c)];
|
|
if (IEEE80211_IS_CHAN_HT40(c))
|
|
usec >>= 1;
|
|
} else
|
|
usec = clks / CLOCK_RATE[WIRELESS_MODE_11b];
|
|
return usec;
|
|
}
|
|
|
|
/*
|
|
* Setup a h/w rate table's reverse lookup table and
|
|
* fill in ack durations. This routine is called for
|
|
* each rate table returned through the ah_getRateTable
|
|
* method. The reverse lookup tables are assumed to be
|
|
* initialized to zero (or at least the first entry).
|
|
* We use this as a key that indicates whether or not
|
|
* we've previously setup the reverse lookup table.
|
|
*
|
|
* XXX not reentrant, but shouldn't matter
|
|
*/
|
|
void
|
|
ath_hal_setupratetable(struct ath_hal *ah, HAL_RATE_TABLE *rt)
|
|
{
|
|
#define N(a) (sizeof(a)/sizeof(a[0]))
|
|
int i;
|
|
|
|
if (rt->rateCodeToIndex[0] != 0) /* already setup */
|
|
return;
|
|
for (i = 0; i < N(rt->rateCodeToIndex); i++)
|
|
rt->rateCodeToIndex[i] = (uint8_t) -1;
|
|
for (i = 0; i < rt->rateCount; i++) {
|
|
uint8_t code = rt->info[i].rateCode;
|
|
uint8_t cix = rt->info[i].controlRate;
|
|
|
|
HALASSERT(code < N(rt->rateCodeToIndex));
|
|
rt->rateCodeToIndex[code] = i;
|
|
HALASSERT((code | rt->info[i].shortPreamble) <
|
|
N(rt->rateCodeToIndex));
|
|
rt->rateCodeToIndex[code | rt->info[i].shortPreamble] = i;
|
|
/*
|
|
* XXX for 11g the control rate to use for 5.5 and 11 Mb/s
|
|
* depends on whether they are marked as basic rates;
|
|
* the static tables are setup with an 11b-compatible
|
|
* 2Mb/s rate which will work but is suboptimal
|
|
*/
|
|
rt->info[i].lpAckDuration = ath_hal_computetxtime(ah, rt,
|
|
WLAN_CTRL_FRAME_SIZE, cix, AH_FALSE);
|
|
rt->info[i].spAckDuration = ath_hal_computetxtime(ah, rt,
|
|
WLAN_CTRL_FRAME_SIZE, cix, AH_TRUE);
|
|
}
|
|
#undef N
|
|
}
|
|
|
|
HAL_STATUS
|
|
ath_hal_getcapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
|
|
uint32_t capability, uint32_t *result)
|
|
{
|
|
const HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
|
|
|
|
switch (type) {
|
|
case HAL_CAP_REG_DMN: /* regulatory domain */
|
|
*result = AH_PRIVATE(ah)->ah_currentRD;
|
|
return HAL_OK;
|
|
case HAL_CAP_CIPHER: /* cipher handled in hardware */
|
|
case HAL_CAP_TKIP_MIC: /* handle TKIP MIC in hardware */
|
|
return HAL_ENOTSUPP;
|
|
case HAL_CAP_TKIP_SPLIT: /* hardware TKIP uses split keys */
|
|
return HAL_ENOTSUPP;
|
|
case HAL_CAP_PHYCOUNTERS: /* hardware PHY error counters */
|
|
return pCap->halHwPhyCounterSupport ? HAL_OK : HAL_ENXIO;
|
|
case HAL_CAP_WME_TKIPMIC: /* hardware can do TKIP MIC when WMM is turned on */
|
|
return HAL_ENOTSUPP;
|
|
case HAL_CAP_DIVERSITY: /* hardware supports fast diversity */
|
|
return HAL_ENOTSUPP;
|
|
case HAL_CAP_KEYCACHE_SIZE: /* hardware key cache size */
|
|
*result = pCap->halKeyCacheSize;
|
|
return HAL_OK;
|
|
case HAL_CAP_NUM_TXQUEUES: /* number of hardware tx queues */
|
|
*result = pCap->halTotalQueues;
|
|
return HAL_OK;
|
|
case HAL_CAP_VEOL: /* hardware supports virtual EOL */
|
|
return pCap->halVEOLSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_PSPOLL: /* hardware PS-Poll support works */
|
|
return pCap->halPSPollBroken ? HAL_ENOTSUPP : HAL_OK;
|
|
case HAL_CAP_COMPRESSION:
|
|
return pCap->halCompressSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_BURST:
|
|
return pCap->halBurstSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_FASTFRAME:
|
|
return pCap->halFastFramesSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_DIAG: /* hardware diagnostic support */
|
|
*result = AH_PRIVATE(ah)->ah_diagreg;
|
|
return HAL_OK;
|
|
case HAL_CAP_TXPOW: /* global tx power limit */
|
|
switch (capability) {
|
|
case 0: /* facility is supported */
|
|
return HAL_OK;
|
|
case 1: /* current limit */
|
|
*result = AH_PRIVATE(ah)->ah_powerLimit;
|
|
return HAL_OK;
|
|
case 2: /* current max tx power */
|
|
*result = AH_PRIVATE(ah)->ah_maxPowerLevel;
|
|
return HAL_OK;
|
|
case 3: /* scale factor */
|
|
*result = AH_PRIVATE(ah)->ah_tpScale;
|
|
return HAL_OK;
|
|
}
|
|
return HAL_ENOTSUPP;
|
|
case HAL_CAP_BSSIDMASK: /* hardware supports bssid mask */
|
|
return pCap->halBssIdMaskSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_MCAST_KEYSRCH: /* multicast frame keycache search */
|
|
return pCap->halMcastKeySrchSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_TSF_ADJUST: /* hardware has beacon tsf adjust */
|
|
return HAL_ENOTSUPP;
|
|
case HAL_CAP_RFSILENT: /* rfsilent support */
|
|
switch (capability) {
|
|
case 0: /* facility is supported */
|
|
return pCap->halRfSilentSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case 1: /* current setting */
|
|
return AH_PRIVATE(ah)->ah_rfkillEnabled ?
|
|
HAL_OK : HAL_ENOTSUPP;
|
|
case 2: /* rfsilent config */
|
|
*result = AH_PRIVATE(ah)->ah_rfsilent;
|
|
return HAL_OK;
|
|
}
|
|
return HAL_ENOTSUPP;
|
|
case HAL_CAP_11D:
|
|
return HAL_OK;
|
|
case HAL_CAP_RXORN_FATAL: /* HAL_INT_RXORN treated as fatal */
|
|
return AH_PRIVATE(ah)->ah_rxornIsFatal ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_HT:
|
|
return pCap->halHTSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_TX_CHAINMASK: /* mask of TX chains supported */
|
|
*result = pCap->halTxChainMask;
|
|
return HAL_OK;
|
|
case HAL_CAP_RX_CHAINMASK: /* mask of RX chains supported */
|
|
*result = pCap->halRxChainMask;
|
|
return HAL_OK;
|
|
case HAL_CAP_RXTSTAMP_PREC: /* rx desc tstamp precision (bits) */
|
|
*result = pCap->halTstampPrecision;
|
|
return HAL_OK;
|
|
case HAL_CAP_INTRMASK: /* mask of supported interrupts */
|
|
*result = pCap->halIntrMask;
|
|
return HAL_OK;
|
|
case HAL_CAP_BSSIDMATCH: /* hardware has disable bssid match */
|
|
return pCap->halBssidMatchSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_STREAMS: /* number of 11n spatial streams */
|
|
switch (capability) {
|
|
case 0: /* TX */
|
|
*result = pCap->halTxStreams;
|
|
return HAL_OK;
|
|
case 1: /* RX */
|
|
*result = pCap->halRxStreams;
|
|
return HAL_OK;
|
|
default:
|
|
return HAL_ENOTSUPP;
|
|
}
|
|
case HAL_CAP_SPLIT_4KB_TRANS: /* hardware handles descriptors straddling 4k page boundary */
|
|
return pCap->hal4kbSplitTransSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_HAS_PSPOLL: /* hardware has ps-poll support */
|
|
return pCap->halHasPsPollSupport ? HAL_OK : HAL_ENOTSUPP;
|
|
case HAL_CAP_RXDESC_SELFLINK: /* hardware supports self-linked final RX descriptors correctly */
|
|
return pCap->halHasRxSelfLinkedTail ? HAL_OK : HAL_ENOTSUPP;
|
|
default:
|
|
return HAL_EINVAL;
|
|
}
|
|
}
|
|
|
|
HAL_BOOL
|
|
ath_hal_setcapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
|
|
uint32_t capability, uint32_t setting, HAL_STATUS *status)
|
|
{
|
|
|
|
switch (type) {
|
|
case HAL_CAP_TXPOW:
|
|
switch (capability) {
|
|
case 3:
|
|
if (setting <= HAL_TP_SCALE_MIN) {
|
|
AH_PRIVATE(ah)->ah_tpScale = setting;
|
|
return AH_TRUE;
|
|
}
|
|
break;
|
|
}
|
|
break;
|
|
case HAL_CAP_RFSILENT: /* rfsilent support */
|
|
/*
|
|
* NB: allow even if halRfSilentSupport is false
|
|
* in case the EEPROM is misprogrammed.
|
|
*/
|
|
switch (capability) {
|
|
case 1: /* current setting */
|
|
AH_PRIVATE(ah)->ah_rfkillEnabled = (setting != 0);
|
|
return AH_TRUE;
|
|
case 2: /* rfsilent config */
|
|
/* XXX better done per-chip for validation? */
|
|
AH_PRIVATE(ah)->ah_rfsilent = setting;
|
|
return AH_TRUE;
|
|
}
|
|
break;
|
|
case HAL_CAP_REG_DMN: /* regulatory domain */
|
|
AH_PRIVATE(ah)->ah_currentRD = setting;
|
|
return AH_TRUE;
|
|
case HAL_CAP_RXORN_FATAL: /* HAL_INT_RXORN treated as fatal */
|
|
AH_PRIVATE(ah)->ah_rxornIsFatal = setting;
|
|
return AH_TRUE;
|
|
default:
|
|
break;
|
|
}
|
|
if (status)
|
|
*status = HAL_EINVAL;
|
|
return AH_FALSE;
|
|
}
|
|
|
|
/*
|
|
* Common support for getDiagState method.
|
|
*/
|
|
|
|
static u_int
|
|
ath_hal_getregdump(struct ath_hal *ah, const HAL_REGRANGE *regs,
|
|
void *dstbuf, int space)
|
|
{
|
|
uint32_t *dp = dstbuf;
|
|
int i;
|
|
|
|
for (i = 0; space >= 2*sizeof(uint32_t); i++) {
|
|
u_int r = regs[i].start;
|
|
u_int e = regs[i].end;
|
|
*dp++ = (r<<16) | e;
|
|
space -= sizeof(uint32_t);
|
|
do {
|
|
*dp++ = OS_REG_READ(ah, r);
|
|
r += sizeof(uint32_t);
|
|
space -= sizeof(uint32_t);
|
|
} while (r <= e && space >= sizeof(uint32_t));
|
|
}
|
|
return (char *) dp - (char *) dstbuf;
|
|
}
|
|
|
|
static void
|
|
ath_hal_setregs(struct ath_hal *ah, const HAL_REGWRITE *regs, int space)
|
|
{
|
|
while (space >= sizeof(HAL_REGWRITE)) {
|
|
OS_REG_WRITE(ah, regs->addr, regs->value);
|
|
regs++, space -= sizeof(HAL_REGWRITE);
|
|
}
|
|
}
|
|
|
|
HAL_BOOL
|
|
ath_hal_getdiagstate(struct ath_hal *ah, int request,
|
|
const void *args, uint32_t argsize,
|
|
void **result, uint32_t *resultsize)
|
|
{
|
|
switch (request) {
|
|
case HAL_DIAG_REVS:
|
|
*result = &AH_PRIVATE(ah)->ah_devid;
|
|
*resultsize = sizeof(HAL_REVS);
|
|
return AH_TRUE;
|
|
case HAL_DIAG_REGS:
|
|
*resultsize = ath_hal_getregdump(ah, args, *result,*resultsize);
|
|
return AH_TRUE;
|
|
case HAL_DIAG_SETREGS:
|
|
ath_hal_setregs(ah, args, argsize);
|
|
*resultsize = 0;
|
|
return AH_TRUE;
|
|
case HAL_DIAG_FATALERR:
|
|
*result = &AH_PRIVATE(ah)->ah_fatalState[0];
|
|
*resultsize = sizeof(AH_PRIVATE(ah)->ah_fatalState);
|
|
return AH_TRUE;
|
|
case HAL_DIAG_EEREAD:
|
|
if (argsize != sizeof(uint16_t))
|
|
return AH_FALSE;
|
|
if (!ath_hal_eepromRead(ah, *(const uint16_t *)args, *result))
|
|
return AH_FALSE;
|
|
*resultsize = sizeof(uint16_t);
|
|
return AH_TRUE;
|
|
#ifdef AH_PRIVATE_DIAG
|
|
case HAL_DIAG_SETKEY: {
|
|
const HAL_DIAG_KEYVAL *dk;
|
|
|
|
if (argsize != sizeof(HAL_DIAG_KEYVAL))
|
|
return AH_FALSE;
|
|
dk = (const HAL_DIAG_KEYVAL *)args;
|
|
return ah->ah_setKeyCacheEntry(ah, dk->dk_keyix,
|
|
&dk->dk_keyval, dk->dk_mac, dk->dk_xor);
|
|
}
|
|
case HAL_DIAG_RESETKEY:
|
|
if (argsize != sizeof(uint16_t))
|
|
return AH_FALSE;
|
|
return ah->ah_resetKeyCacheEntry(ah, *(const uint16_t *)args);
|
|
#ifdef AH_SUPPORT_WRITE_EEPROM
|
|
case HAL_DIAG_EEWRITE: {
|
|
const HAL_DIAG_EEVAL *ee;
|
|
if (argsize != sizeof(HAL_DIAG_EEVAL))
|
|
return AH_FALSE;
|
|
ee = (const HAL_DIAG_EEVAL *)args;
|
|
return ath_hal_eepromWrite(ah, ee->ee_off, ee->ee_data);
|
|
}
|
|
#endif /* AH_SUPPORT_WRITE_EEPROM */
|
|
#endif /* AH_PRIVATE_DIAG */
|
|
case HAL_DIAG_11NCOMPAT:
|
|
if (argsize == 0) {
|
|
*resultsize = sizeof(uint32_t);
|
|
*((uint32_t *)(*result)) =
|
|
AH_PRIVATE(ah)->ah_11nCompat;
|
|
} else if (argsize == sizeof(uint32_t)) {
|
|
AH_PRIVATE(ah)->ah_11nCompat = *(const uint32_t *)args;
|
|
} else
|
|
return AH_FALSE;
|
|
return AH_TRUE;
|
|
}
|
|
return AH_FALSE;
|
|
}
|
|
|
|
/*
|
|
* Set the properties of the tx queue with the parameters
|
|
* from qInfo.
|
|
*/
|
|
HAL_BOOL
|
|
ath_hal_setTxQProps(struct ath_hal *ah,
|
|
HAL_TX_QUEUE_INFO *qi, const HAL_TXQ_INFO *qInfo)
|
|
{
|
|
uint32_t cw;
|
|
|
|
if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
|
|
HALDEBUG(ah, HAL_DEBUG_TXQUEUE,
|
|
"%s: inactive queue\n", __func__);
|
|
return AH_FALSE;
|
|
}
|
|
/* XXX validate parameters */
|
|
qi->tqi_ver = qInfo->tqi_ver;
|
|
qi->tqi_subtype = qInfo->tqi_subtype;
|
|
qi->tqi_qflags = qInfo->tqi_qflags;
|
|
qi->tqi_priority = qInfo->tqi_priority;
|
|
if (qInfo->tqi_aifs != HAL_TXQ_USEDEFAULT)
|
|
qi->tqi_aifs = AH_MIN(qInfo->tqi_aifs, 255);
|
|
else
|
|
qi->tqi_aifs = INIT_AIFS;
|
|
if (qInfo->tqi_cwmin != HAL_TXQ_USEDEFAULT) {
|
|
cw = AH_MIN(qInfo->tqi_cwmin, 1024);
|
|
/* make sure that the CWmin is of the form (2^n - 1) */
|
|
qi->tqi_cwmin = 1;
|
|
while (qi->tqi_cwmin < cw)
|
|
qi->tqi_cwmin = (qi->tqi_cwmin << 1) | 1;
|
|
} else
|
|
qi->tqi_cwmin = qInfo->tqi_cwmin;
|
|
if (qInfo->tqi_cwmax != HAL_TXQ_USEDEFAULT) {
|
|
cw = AH_MIN(qInfo->tqi_cwmax, 1024);
|
|
/* make sure that the CWmax is of the form (2^n - 1) */
|
|
qi->tqi_cwmax = 1;
|
|
while (qi->tqi_cwmax < cw)
|
|
qi->tqi_cwmax = (qi->tqi_cwmax << 1) | 1;
|
|
} else
|
|
qi->tqi_cwmax = INIT_CWMAX;
|
|
/* Set retry limit values */
|
|
if (qInfo->tqi_shretry != 0)
|
|
qi->tqi_shretry = AH_MIN(qInfo->tqi_shretry, 15);
|
|
else
|
|
qi->tqi_shretry = INIT_SH_RETRY;
|
|
if (qInfo->tqi_lgretry != 0)
|
|
qi->tqi_lgretry = AH_MIN(qInfo->tqi_lgretry, 15);
|
|
else
|
|
qi->tqi_lgretry = INIT_LG_RETRY;
|
|
qi->tqi_cbrPeriod = qInfo->tqi_cbrPeriod;
|
|
qi->tqi_cbrOverflowLimit = qInfo->tqi_cbrOverflowLimit;
|
|
qi->tqi_burstTime = qInfo->tqi_burstTime;
|
|
qi->tqi_readyTime = qInfo->tqi_readyTime;
|
|
|
|
switch (qInfo->tqi_subtype) {
|
|
case HAL_WME_UPSD:
|
|
if (qi->tqi_type == HAL_TX_QUEUE_DATA)
|
|
qi->tqi_intFlags = HAL_TXQ_USE_LOCKOUT_BKOFF_DIS;
|
|
break;
|
|
default:
|
|
break; /* NB: silence compiler */
|
|
}
|
|
return AH_TRUE;
|
|
}
|
|
|
|
HAL_BOOL
|
|
ath_hal_getTxQProps(struct ath_hal *ah,
|
|
HAL_TXQ_INFO *qInfo, const HAL_TX_QUEUE_INFO *qi)
|
|
{
|
|
if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
|
|
HALDEBUG(ah, HAL_DEBUG_TXQUEUE,
|
|
"%s: inactive queue\n", __func__);
|
|
return AH_FALSE;
|
|
}
|
|
|
|
qInfo->tqi_qflags = qi->tqi_qflags;
|
|
qInfo->tqi_ver = qi->tqi_ver;
|
|
qInfo->tqi_subtype = qi->tqi_subtype;
|
|
qInfo->tqi_qflags = qi->tqi_qflags;
|
|
qInfo->tqi_priority = qi->tqi_priority;
|
|
qInfo->tqi_aifs = qi->tqi_aifs;
|
|
qInfo->tqi_cwmin = qi->tqi_cwmin;
|
|
qInfo->tqi_cwmax = qi->tqi_cwmax;
|
|
qInfo->tqi_shretry = qi->tqi_shretry;
|
|
qInfo->tqi_lgretry = qi->tqi_lgretry;
|
|
qInfo->tqi_cbrPeriod = qi->tqi_cbrPeriod;
|
|
qInfo->tqi_cbrOverflowLimit = qi->tqi_cbrOverflowLimit;
|
|
qInfo->tqi_burstTime = qi->tqi_burstTime;
|
|
qInfo->tqi_readyTime = qi->tqi_readyTime;
|
|
return AH_TRUE;
|
|
}
|
|
|
|
/* 11a Turbo 11b 11g 108g */
|
|
static const int16_t NOISE_FLOOR[] = { -96, -93, -98, -96, -93 };
|
|
|
|
/*
|
|
* Read the current channel noise floor and return.
|
|
* If nf cal hasn't finished, channel noise floor should be 0
|
|
* and we return a nominal value based on band and frequency.
|
|
*
|
|
* NB: This is a private routine used by per-chip code to
|
|
* implement the ah_getChanNoise method.
|
|
*/
|
|
int16_t
|
|
ath_hal_getChanNoise(struct ath_hal *ah, const struct ieee80211_channel *chan)
|
|
{
|
|
HAL_CHANNEL_INTERNAL *ichan;
|
|
|
|
ichan = ath_hal_checkchannel(ah, chan);
|
|
if (ichan == AH_NULL) {
|
|
HALDEBUG(ah, HAL_DEBUG_NFCAL,
|
|
"%s: invalid channel %u/0x%x; no mapping\n",
|
|
__func__, chan->ic_freq, chan->ic_flags);
|
|
return 0;
|
|
}
|
|
if (ichan->rawNoiseFloor == 0) {
|
|
WIRELESS_MODE mode = ath_hal_chan2wmode(ah, chan);
|
|
|
|
HALASSERT(mode < WIRELESS_MODE_MAX);
|
|
return NOISE_FLOOR[mode] + ath_hal_getNfAdjust(ah, ichan);
|
|
} else
|
|
return ichan->rawNoiseFloor + ichan->noiseFloorAdjust;
|
|
}
|
|
|
|
/*
|
|
* Fetch the current setup of ctl/ext noise floor values.
|
|
*
|
|
* If the CHANNEL_MIMO_NF_VALID flag isn't set, the array is simply
|
|
* populated with values from NOISE_FLOOR[] + ath_hal_getNfAdjust().
|
|
*
|
|
* The caller must supply ctl/ext NF arrays which are at least
|
|
* AH_MIMO_MAX_CHAINS entries long.
|
|
*/
|
|
int
|
|
ath_hal_get_mimo_chan_noise(struct ath_hal *ah,
|
|
const struct ieee80211_channel *chan, int16_t *nf_ctl,
|
|
int16_t *nf_ext)
|
|
{
|
|
#ifdef AH_SUPPORT_AR5416
|
|
HAL_CHANNEL_INTERNAL *ichan;
|
|
int i;
|
|
|
|
ichan = ath_hal_checkchannel(ah, chan);
|
|
if (ichan == AH_NULL) {
|
|
HALDEBUG(ah, HAL_DEBUG_NFCAL,
|
|
"%s: invalid channel %u/0x%x; no mapping\n",
|
|
__func__, chan->ic_freq, chan->ic_flags);
|
|
for (i = 0; i < AH_MIMO_MAX_CHAINS; i++) {
|
|
nf_ctl[i] = nf_ext[i] = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Return 0 if there's no valid MIMO values (yet) */
|
|
if (! (ichan->privFlags & CHANNEL_MIMO_NF_VALID)) {
|
|
for (i = 0; i < AH_MIMO_MAX_CHAINS; i++) {
|
|
nf_ctl[i] = nf_ext[i] = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
if (ichan->rawNoiseFloor == 0) {
|
|
WIRELESS_MODE mode = ath_hal_chan2wmode(ah, chan);
|
|
HALASSERT(mode < WIRELESS_MODE_MAX);
|
|
/*
|
|
* See the comment below - this could cause issues for
|
|
* stations which have a very low RSSI, below the
|
|
* 'normalised' NF values in NOISE_FLOOR[].
|
|
*/
|
|
for (i = 0; i < AH_MIMO_MAX_CHAINS; i++) {
|
|
nf_ctl[i] = nf_ext[i] = NOISE_FLOOR[mode] +
|
|
ath_hal_getNfAdjust(ah, ichan);
|
|
}
|
|
return 1;
|
|
} else {
|
|
/*
|
|
* The value returned here from a MIMO radio is presumed to be
|
|
* "good enough" as a NF calculation. As RSSI values are calculated
|
|
* against this, an adjusted NF may be higher than the RSSI value
|
|
* returned from a vary weak station, resulting in an obscenely
|
|
* high signal strength calculation being returned.
|
|
*
|
|
* This should be re-evaluated at a later date, along with any
|
|
* signal strength calculations which are made. Quite likely the
|
|
* RSSI values will need to be adjusted to ensure the calculations
|
|
* don't "wrap" when RSSI is less than the "adjusted" NF value.
|
|
* ("Adjust" here is via ichan->noiseFloorAdjust.)
|
|
*/
|
|
for (i = 0; i < AH_MIMO_MAX_CHAINS; i++) {
|
|
nf_ctl[i] = ichan->noiseFloorCtl[i] + ath_hal_getNfAdjust(ah, ichan);
|
|
nf_ext[i] = ichan->noiseFloorExt[i] + ath_hal_getNfAdjust(ah, ichan);
|
|
}
|
|
return 1;
|
|
}
|
|
#else
|
|
return 0;
|
|
#endif /* AH_SUPPORT_AR5416 */
|
|
}
|
|
|
|
/*
|
|
* Process all valid raw noise floors into the dBm noise floor values.
|
|
* Though our device has no reference for a dBm noise floor, we perform
|
|
* a relative minimization of NF's based on the lowest NF found across a
|
|
* channel scan.
|
|
*/
|
|
void
|
|
ath_hal_process_noisefloor(struct ath_hal *ah)
|
|
{
|
|
HAL_CHANNEL_INTERNAL *c;
|
|
int16_t correct2, correct5;
|
|
int16_t lowest2, lowest5;
|
|
int i;
|
|
|
|
/*
|
|
* Find the lowest 2GHz and 5GHz noise floor values after adjusting
|
|
* for statistically recorded NF/channel deviation.
|
|
*/
|
|
correct2 = lowest2 = 0;
|
|
correct5 = lowest5 = 0;
|
|
for (i = 0; i < AH_PRIVATE(ah)->ah_nchan; i++) {
|
|
WIRELESS_MODE mode;
|
|
int16_t nf;
|
|
|
|
c = &AH_PRIVATE(ah)->ah_channels[i];
|
|
if (c->rawNoiseFloor >= 0)
|
|
continue;
|
|
/* XXX can't identify proper mode */
|
|
mode = IS_CHAN_5GHZ(c) ? WIRELESS_MODE_11a : WIRELESS_MODE_11g;
|
|
nf = c->rawNoiseFloor + NOISE_FLOOR[mode] +
|
|
ath_hal_getNfAdjust(ah, c);
|
|
if (IS_CHAN_5GHZ(c)) {
|
|
if (nf < lowest5) {
|
|
lowest5 = nf;
|
|
correct5 = NOISE_FLOOR[mode] -
|
|
(c->rawNoiseFloor + ath_hal_getNfAdjust(ah, c));
|
|
}
|
|
} else {
|
|
if (nf < lowest2) {
|
|
lowest2 = nf;
|
|
correct2 = NOISE_FLOOR[mode] -
|
|
(c->rawNoiseFloor + ath_hal_getNfAdjust(ah, c));
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Correct the channels to reach the expected NF value */
|
|
for (i = 0; i < AH_PRIVATE(ah)->ah_nchan; i++) {
|
|
c = &AH_PRIVATE(ah)->ah_channels[i];
|
|
if (c->rawNoiseFloor >= 0)
|
|
continue;
|
|
/* Apply correction factor */
|
|
c->noiseFloorAdjust = ath_hal_getNfAdjust(ah, c) +
|
|
(IS_CHAN_5GHZ(c) ? correct5 : correct2);
|
|
HALDEBUG(ah, HAL_DEBUG_NFCAL, "%u raw nf %d adjust %d\n",
|
|
c->channel, c->rawNoiseFloor, c->noiseFloorAdjust);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* INI support routines.
|
|
*/
|
|
|
|
int
|
|
ath_hal_ini_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
|
|
int col, int regWr)
|
|
{
|
|
int r;
|
|
|
|
HALASSERT(col < ia->cols);
|
|
for (r = 0; r < ia->rows; r++) {
|
|
OS_REG_WRITE(ah, HAL_INI_VAL(ia, r, 0),
|
|
HAL_INI_VAL(ia, r, col));
|
|
|
|
/* Analog shift register delay seems needed for Merlin - PR kern/154220 */
|
|
if (HAL_INI_VAL(ia, r, 0) >= 0x7800 && HAL_INI_VAL(ia, r, 0) < 0x78a0)
|
|
OS_DELAY(100);
|
|
|
|
DMA_YIELD(regWr);
|
|
}
|
|
return regWr;
|
|
}
|
|
|
|
void
|
|
ath_hal_ini_bank_setup(uint32_t data[], const HAL_INI_ARRAY *ia, int col)
|
|
{
|
|
int r;
|
|
|
|
HALASSERT(col < ia->cols);
|
|
for (r = 0; r < ia->rows; r++)
|
|
data[r] = HAL_INI_VAL(ia, r, col);
|
|
}
|
|
|
|
int
|
|
ath_hal_ini_bank_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
|
|
const uint32_t data[], int regWr)
|
|
{
|
|
int r;
|
|
|
|
for (r = 0; r < ia->rows; r++) {
|
|
OS_REG_WRITE(ah, HAL_INI_VAL(ia, r, 0), data[r]);
|
|
DMA_YIELD(regWr);
|
|
}
|
|
return regWr;
|
|
}
|
|
|
|
/*
|
|
* These are EEPROM board related routines which should likely live in
|
|
* a helper library of some sort.
|
|
*/
|
|
|
|
/**************************************************************
|
|
* ath_ee_getLowerUppderIndex
|
|
*
|
|
* Return indices surrounding the value in sorted integer lists.
|
|
* Requirement: the input list must be monotonically increasing
|
|
* and populated up to the list size
|
|
* Returns: match is set if an index in the array matches exactly
|
|
* or a the target is before or after the range of the array.
|
|
*/
|
|
HAL_BOOL
|
|
ath_ee_getLowerUpperIndex(uint8_t target, uint8_t *pList, uint16_t listSize,
|
|
uint16_t *indexL, uint16_t *indexR)
|
|
{
|
|
uint16_t i;
|
|
|
|
/*
|
|
* Check first and last elements for beyond ordered array cases.
|
|
*/
|
|
if (target <= pList[0]) {
|
|
*indexL = *indexR = 0;
|
|
return AH_TRUE;
|
|
}
|
|
if (target >= pList[listSize-1]) {
|
|
*indexL = *indexR = (uint16_t)(listSize - 1);
|
|
return AH_TRUE;
|
|
}
|
|
|
|
/* look for value being near or between 2 values in list */
|
|
for (i = 0; i < listSize - 1; i++) {
|
|
/*
|
|
* If value is close to the current value of the list
|
|
* then target is not between values, it is one of the values
|
|
*/
|
|
if (pList[i] == target) {
|
|
*indexL = *indexR = i;
|
|
return AH_TRUE;
|
|
}
|
|
/*
|
|
* Look for value being between current value and next value
|
|
* if so return these 2 values
|
|
*/
|
|
if (target < pList[i + 1]) {
|
|
*indexL = i;
|
|
*indexR = (uint16_t)(i + 1);
|
|
return AH_FALSE;
|
|
}
|
|
}
|
|
HALASSERT(0);
|
|
*indexL = *indexR = 0;
|
|
return AH_FALSE;
|
|
}
|
|
|
|
/**************************************************************
|
|
* ath_ee_FillVpdTable
|
|
*
|
|
* Fill the Vpdlist for indices Pmax-Pmin
|
|
* Note: pwrMin, pwrMax and Vpdlist are all in dBm * 4
|
|
*/
|
|
HAL_BOOL
|
|
ath_ee_FillVpdTable(uint8_t pwrMin, uint8_t pwrMax, uint8_t *pPwrList,
|
|
uint8_t *pVpdList, uint16_t numIntercepts, uint8_t *pRetVpdList)
|
|
{
|
|
uint16_t i, k;
|
|
uint8_t currPwr = pwrMin;
|
|
uint16_t idxL, idxR;
|
|
|
|
HALASSERT(pwrMax > pwrMin);
|
|
for (i = 0; i <= (pwrMax - pwrMin) / 2; i++) {
|
|
ath_ee_getLowerUpperIndex(currPwr, pPwrList, numIntercepts,
|
|
&(idxL), &(idxR));
|
|
if (idxR < 1)
|
|
idxR = 1; /* extrapolate below */
|
|
if (idxL == numIntercepts - 1)
|
|
idxL = (uint16_t)(numIntercepts - 2); /* extrapolate above */
|
|
if (pPwrList[idxL] == pPwrList[idxR])
|
|
k = pVpdList[idxL];
|
|
else
|
|
k = (uint16_t)( ((currPwr - pPwrList[idxL]) * pVpdList[idxR] + (pPwrList[idxR] - currPwr) * pVpdList[idxL]) /
|
|
(pPwrList[idxR] - pPwrList[idxL]) );
|
|
HALASSERT(k < 256);
|
|
pRetVpdList[i] = (uint8_t)k;
|
|
currPwr += 2; /* half dB steps */
|
|
}
|
|
|
|
return AH_TRUE;
|
|
}
|
|
|
|
/**************************************************************************
|
|
* ath_ee_interpolate
|
|
*
|
|
* Returns signed interpolated or the scaled up interpolated value
|
|
*/
|
|
int16_t
|
|
ath_ee_interpolate(uint16_t target, uint16_t srcLeft, uint16_t srcRight,
|
|
int16_t targetLeft, int16_t targetRight)
|
|
{
|
|
int16_t rv;
|
|
|
|
if (srcRight == srcLeft) {
|
|
rv = targetLeft;
|
|
} else {
|
|
rv = (int16_t)( ((target - srcLeft) * targetRight +
|
|
(srcRight - target) * targetLeft) / (srcRight - srcLeft) );
|
|
}
|
|
return rv;
|
|
}
|