d5e149bab7
the default partition, eMMC v4.41 and later devices can additionally provide up to: 1 enhanced user data area partition 2 boot partitions 1 RPMB (Replay Protected Memory Block) partition 4 general purpose partitions (optionally with a enhanced or extended attribute) Of these "partitions", only the enhanced user data area one actually slices the user data area partition and, thus, gets handled with the help of geom_flashmap(4). The other types of partitions have address space independent from the default partition and need to be switched to via CMD6 (SWITCH), i. e. constitute a set of additional "disks". The second kind of these "partitions" doesn't fit that well into the design of mmc(4) and mmcsd(4). I've decided to let mmcsd(4) hook all of these "partitions" up as disk(9)'s (except for the RPMB partition as it didn't seem to make much sense to be able to put a file-system there and may require authentication; therefore, RPMB partitions are solely accessible via the newly added IOCTL interface currently; see also below). This approach for one resulted in cleaner code. Second, it retains the notion of mmcsd(4) children corresponding to a single physical device each. With the addition of some layering violations, it also would have been possible for mmc(4) to add separate mmcsd(4) instances with one disk each for all of these "partitions", however. Still, both mmc(4) and mmcsd(4) share some common code now e. g. for issuing CMD6, which has been factored out into mmc_subr.c. Besides simply subdividing eMMC devices, some Intel NUCs having UEFI code in the boot partitions etc., another use case for the partition support is the activation of pseudo-SLC mode, which manufacturers of eMMC chips typically associate with the enhanced user data area and/ or the enhanced attribute of general purpose partitions. CAVEAT EMPTOR: Partitioning eMMC devices is a one-time operation. - Now that properly issuing CMD6 is crucial (so data isn't written to the wrong partition for example), make a step into the direction of correctly handling the timeout for these commands in the MMC layer. Also, do a SEND_STATUS when CMD6 is invoked with an R1B response as recommended by relevant specifications. However, quite some work is left to be done in this regard; all other R1B-type commands done by the MMC layer also should be followed by a SEND_STATUS (CMD13), the erase timeout calculations/handling as documented in specifications are entirely ignored so far, the MMC layer doesn't provide timeouts applicable up to the bridge drivers and at least sdhci(4) currently is hardcoding 1 s as timeout for all command types unconditionally. Let alone already available return codes often not being checked in the MMC layer ... - Add an IOCTL interface to mmcsd(4); this is sufficiently compatible with Linux so that the GNU mmc-utils can be ported to and used with FreeBSD (note that due to the remaining deficiencies outlined above SANITIZE operations issued by/with `mmc` currently most likely will fail). These latter will be added to ports as sysutils/mmc-utils in a bit. Among others, the `mmc` tool of the GNU mmc-utils allows for partitioning eMMC devices (tested working). - For devices following the eMMC specification v4.41 or later, year 0 is 2013 rather than 1997; so correct this for assembling the device ID string properly. - Let mmcsd.ko depend on mmc.ko. Additionally, bump MMC_VERSION as at least for some of the above a matching pair is required. - In the ACPI front-end of sdhci(4) describe the Intel eMMC and SDXC controllers as such in order to match the PCI one. Additionally, in the entry for the 80860F14 SDXC controller remove the eMMC-only SDHCI_QUIRK_INTEL_POWER_UP_RESET. OKed by: imp Submitted by: ian (mmc_switch_status() implementation)
1297 lines
34 KiB
C
1297 lines
34 KiB
C
/*-
|
|
* Copyright (c) 2006 Bernd Walter. All rights reserved.
|
|
* Copyright (c) 2006 M. Warner Losh. All rights reserved.
|
|
* Copyright (c) 2017 Marius Strobl <marius@FreeBSD.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* Portions of this software may have been developed with reference to
|
|
* the SD Simplified Specification. The following disclaimer may apply:
|
|
*
|
|
* The following conditions apply to the release of the simplified
|
|
* specification ("Simplified Specification") by the SD Card Association and
|
|
* the SD Group. The Simplified Specification is a subset of the complete SD
|
|
* Specification which is owned by the SD Card Association and the SD
|
|
* Group. This Simplified Specification is provided on a non-confidential
|
|
* basis subject to the disclaimers below. Any implementation of the
|
|
* Simplified Specification may require a license from the SD Card
|
|
* Association, SD Group, SD-3C LLC or other third parties.
|
|
*
|
|
* Disclaimers:
|
|
*
|
|
* The information contained in the Simplified Specification is presented only
|
|
* as a standard specification for SD Cards and SD Host/Ancillary products and
|
|
* is provided "AS-IS" without any representations or warranties of any
|
|
* kind. No responsibility is assumed by the SD Group, SD-3C LLC or the SD
|
|
* Card Association for any damages, any infringements of patents or other
|
|
* right of the SD Group, SD-3C LLC, the SD Card Association or any third
|
|
* parties, which may result from its use. No license is granted by
|
|
* implication, estoppel or otherwise under any patent or other rights of the
|
|
* SD Group, SD-3C LLC, the SD Card Association or any third party. Nothing
|
|
* herein shall be construed as an obligation by the SD Group, the SD-3C LLC
|
|
* or the SD Card Association to disclose or distribute any technical
|
|
* information, know-how or other confidential information to any third party.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/ioccom.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/slicer.h>
|
|
#include <sys/time.h>
|
|
|
|
#include <geom/geom.h>
|
|
#include <geom/geom_disk.h>
|
|
|
|
#include <dev/mmc/bridge.h>
|
|
#include <dev/mmc/mmc_ioctl.h>
|
|
#include <dev/mmc/mmc_subr.h>
|
|
#include <dev/mmc/mmcbrvar.h>
|
|
#include <dev/mmc/mmcreg.h>
|
|
#include <dev/mmc/mmcvar.h>
|
|
|
|
#include "mmcbus_if.h"
|
|
|
|
#if __FreeBSD_version < 800002
|
|
#define kproc_create kthread_create
|
|
#define kproc_exit kthread_exit
|
|
#endif
|
|
|
|
#define MMCSD_CMD_RETRIES 5
|
|
|
|
#define MMCSD_FMT_BOOT "mmcsd%dboot"
|
|
#define MMCSD_FMT_GP "mmcsd%dgp"
|
|
#define MMCSD_FMT_RPMB "mmcsd%drpmb"
|
|
#define MMCSD_LABEL_ENH "enh"
|
|
|
|
#define MMCSD_PART_NAMELEN (16 + 1)
|
|
|
|
struct mmcsd_softc;
|
|
|
|
struct mmcsd_part {
|
|
struct mtx part_mtx;
|
|
struct mmcsd_softc *sc;
|
|
struct disk *disk;
|
|
struct proc *p;
|
|
struct bio_queue_head bio_queue;
|
|
daddr_t eblock, eend; /* Range remaining after the last erase. */
|
|
u_int cnt;
|
|
u_int type;
|
|
int running;
|
|
int suspend;
|
|
bool ro;
|
|
char name[MMCSD_PART_NAMELEN];
|
|
};
|
|
|
|
struct mmcsd_softc {
|
|
device_t dev;
|
|
device_t mmcbr;
|
|
struct mmcsd_part *part[MMC_PART_MAX];
|
|
enum mmc_card_mode mode;
|
|
uint8_t part_curr; /* Partition currently switched to */
|
|
uint8_t ext_csd[MMC_EXTCSD_SIZE];
|
|
uint16_t rca;
|
|
uint32_t part_time; /* Partition switch timeout [us] */
|
|
off_t enh_base; /* Enhanced user data area slice base ... */
|
|
off_t enh_size; /* ... and size [bytes] */
|
|
int log_count;
|
|
struct timeval log_time;
|
|
struct cdev *rpmb_dev;
|
|
};
|
|
|
|
static const char *errmsg[] =
|
|
{
|
|
"None",
|
|
"Timeout",
|
|
"Bad CRC",
|
|
"Fifo",
|
|
"Failed",
|
|
"Invalid",
|
|
"NO MEMORY"
|
|
};
|
|
|
|
#define LOG_PPS 5 /* Log no more than 5 errors per second. */
|
|
|
|
/* bus entry points */
|
|
static int mmcsd_attach(device_t dev);
|
|
static int mmcsd_detach(device_t dev);
|
|
static int mmcsd_probe(device_t dev);
|
|
|
|
/* disk routines */
|
|
static int mmcsd_close(struct disk *dp);
|
|
static int mmcsd_dump(void *arg, void *virtual, vm_offset_t physical,
|
|
off_t offset, size_t length);
|
|
static int mmcsd_getattr(struct bio *);
|
|
static int mmcsd_ioctl_disk(struct disk *disk, u_long cmd, void *data,
|
|
int fflag, struct thread *td);
|
|
static int mmcsd_open(struct disk *dp);
|
|
static void mmcsd_strategy(struct bio *bp);
|
|
static void mmcsd_task(void *arg);
|
|
|
|
/* RMPB cdev interface */
|
|
static int mmcsd_ioctl_rpmb(struct cdev *dev, u_long cmd, caddr_t data,
|
|
int fflag, struct thread *td);
|
|
|
|
static void mmcsd_add_part(struct mmcsd_softc *sc, u_int type,
|
|
const char *name, u_int cnt, off_t media_size, off_t erase_size, bool ro);
|
|
static int mmcsd_bus_bit_width(device_t dev);
|
|
static daddr_t mmcsd_delete(struct mmcsd_part *part, struct bio *bp);
|
|
static int mmcsd_ioctl(struct mmcsd_part *part, u_long cmd, void *data,
|
|
int fflag);
|
|
static int mmcsd_ioctl_cmd(struct mmcsd_part *part, struct mmc_ioc_cmd *mic,
|
|
int fflag);
|
|
static uintmax_t mmcsd_pretty_size(off_t size, char *unit);
|
|
static daddr_t mmcsd_rw(struct mmcsd_part *part, struct bio *bp);
|
|
static int mmcsd_set_blockcount(struct mmcsd_softc *sc, u_int count, bool rel);
|
|
static int mmcsd_slicer(device_t dev, const char *provider,
|
|
struct flash_slice *slices, int *nslices);
|
|
static int mmcsd_switch_part(device_t bus, device_t dev, uint16_t rca,
|
|
u_int part);
|
|
|
|
#define MMCSD_PART_LOCK(_part) mtx_lock(&(_part)->part_mtx)
|
|
#define MMCSD_PART_UNLOCK(_part) mtx_unlock(&(_part)->part_mtx)
|
|
#define MMCSD_PART_LOCK_INIT(_part) \
|
|
mtx_init(&(_part)->part_mtx, (_part)->name, "mmcsd part", MTX_DEF)
|
|
#define MMCSD_PART_LOCK_DESTROY(_part) mtx_destroy(&(_part)->part_mtx);
|
|
#define MMCSD_PART_ASSERT_LOCKED(_part) \
|
|
mtx_assert(&(_part)->part_mtx, MA_OWNED);
|
|
#define MMCSD_PART_ASSERT_UNLOCKED(_part) \
|
|
mtx_assert(&(_part)->part_mtx, MA_NOTOWNED);
|
|
|
|
static int
|
|
mmcsd_probe(device_t dev)
|
|
{
|
|
|
|
device_quiet(dev);
|
|
device_set_desc(dev, "MMC/SD Memory Card");
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mmcsd_attach(device_t dev)
|
|
{
|
|
device_t mmcbr;
|
|
struct mmcsd_softc *sc;
|
|
const uint8_t *ext_csd;
|
|
off_t erase_size, sector_size, size, wp_size;
|
|
uintmax_t bytes;
|
|
int err, i;
|
|
uint8_t rev;
|
|
bool comp, ro;
|
|
char unit[2];
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->dev = dev;
|
|
sc->mmcbr = mmcbr = device_get_parent(dev);
|
|
sc->mode = mmcbr_get_mode(mmcbr);
|
|
sc->rca = mmc_get_rca(dev);
|
|
|
|
/* Only MMC >= 4.x devices support EXT_CSD. */
|
|
if (mmc_get_spec_vers(dev) >= 4) {
|
|
MMCBUS_ACQUIRE_BUS(mmcbr, dev);
|
|
err = mmc_send_ext_csd(mmcbr, dev, sc->ext_csd);
|
|
MMCBUS_RELEASE_BUS(mmcbr, dev);
|
|
if (err != MMC_ERR_NONE)
|
|
bzero(sc->ext_csd, sizeof(sc->ext_csd));
|
|
}
|
|
ext_csd = sc->ext_csd;
|
|
|
|
/*
|
|
* Enhanced user data area and general purpose partitions are only
|
|
* supported in revision 1.4 (EXT_CSD_REV == 4) and later, the RPMB
|
|
* partition in revision 1.5 (MMC v4.41, EXT_CSD_REV == 5) and later.
|
|
*/
|
|
rev = ext_csd[EXT_CSD_REV];
|
|
|
|
/*
|
|
* Ignore user-creatable enhanced user data area and general purpose
|
|
* partitions partitions as long as partitioning hasn't been finished.
|
|
*/
|
|
comp = (ext_csd[EXT_CSD_PART_SET] & EXT_CSD_PART_SET_COMPLETED) != 0;
|
|
|
|
/*
|
|
* Add enhanced user data area slice, unless it spans the entirety of
|
|
* the user data area. The enhanced area is of a multiple of high
|
|
* capacity write protect groups ((ERASE_GRP_SIZE + HC_WP_GRP_SIZE) *
|
|
* 512 KB) and its offset given in either sectors or bytes, depending
|
|
* on whether it's a high capacity device or not.
|
|
* NB: The slicer and its slices need to be registered before adding
|
|
* the disk for the corresponding user data area as re-tasting is
|
|
* racy.
|
|
*/
|
|
sector_size = mmc_get_sector_size(dev);
|
|
size = ext_csd[EXT_CSD_ENH_SIZE_MULT] +
|
|
(ext_csd[EXT_CSD_ENH_SIZE_MULT + 1] << 8) +
|
|
(ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16);
|
|
if (rev >= 4 && comp == TRUE && size > 0 &&
|
|
(ext_csd[EXT_CSD_PART_SUPPORT] &
|
|
EXT_CSD_PART_SUPPORT_ENH_ATTR_EN) != 0 &&
|
|
(ext_csd[EXT_CSD_PART_ATTR] & (EXT_CSD_PART_ATTR_ENH_USR)) != 0) {
|
|
erase_size = ext_csd[EXT_CSD_ERASE_GRP_SIZE] * 1024 *
|
|
MMC_SECTOR_SIZE;
|
|
wp_size = ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
|
|
size *= erase_size * wp_size;
|
|
if (size != mmc_get_media_size(dev) * sector_size) {
|
|
sc->enh_size = size;
|
|
sc->enh_base = (ext_csd[EXT_CSD_ENH_START_ADDR] +
|
|
(ext_csd[EXT_CSD_ENH_START_ADDR + 1] << 8) +
|
|
(ext_csd[EXT_CSD_ENH_START_ADDR + 2] << 16) +
|
|
(ext_csd[EXT_CSD_ENH_START_ADDR + 3] << 24)) *
|
|
(mmc_get_high_cap(dev) ? MMC_SECTOR_SIZE : 1);
|
|
} else if (bootverbose)
|
|
device_printf(dev,
|
|
"enhanced user data area spans entire device\n");
|
|
}
|
|
|
|
/*
|
|
* Add default partition. This may be the only one or the user
|
|
* data area in case partitions are supported.
|
|
*/
|
|
ro = mmc_get_read_only(dev);
|
|
mmcsd_add_part(sc, EXT_CSD_PART_CONFIG_ACC_DEFAULT, "mmcsd",
|
|
device_get_unit(dev), mmc_get_media_size(dev) * sector_size,
|
|
mmc_get_erase_sector(dev) * sector_size, ro);
|
|
|
|
if (mmc_get_spec_vers(dev) < 3)
|
|
return (0);
|
|
|
|
/* Belatedly announce enhanced user data slice. */
|
|
if (sc->enh_size != 0) {
|
|
bytes = mmcsd_pretty_size(size, unit);
|
|
printf(FLASH_SLICES_FMT ": %ju%sB enhanced user data area "
|
|
"slice offset 0x%jx at %s\n", device_get_nameunit(dev),
|
|
MMCSD_LABEL_ENH, bytes, unit, (uintmax_t)sc->enh_base,
|
|
device_get_nameunit(dev));
|
|
}
|
|
|
|
/*
|
|
* Determine partition switch timeout (provided in units of 10 ms)
|
|
* and ensure it's at least 300 ms as some eMMC chips lie.
|
|
*/
|
|
sc->part_time = max(ext_csd[EXT_CSD_PART_SWITCH_TO] * 10 * 1000,
|
|
300 * 1000);
|
|
|
|
/* Add boot partitions, which are of a fixed multiple of 128 KB. */
|
|
size = ext_csd[EXT_CSD_BOOT_SIZE_MULT] * MMC_BOOT_RPMB_BLOCK_SIZE;
|
|
if (size > 0 && (mmcbr_get_caps(mmcbr) & MMC_CAP_BOOT_NOACC) == 0) {
|
|
mmcsd_add_part(sc, EXT_CSD_PART_CONFIG_ACC_BOOT0,
|
|
MMCSD_FMT_BOOT, 0, size, MMC_BOOT_RPMB_BLOCK_SIZE,
|
|
ro | ((ext_csd[EXT_CSD_BOOT_WP_STATUS] &
|
|
EXT_CSD_BOOT_WP_STATUS_BOOT0_MASK) != 0));
|
|
mmcsd_add_part(sc, EXT_CSD_PART_CONFIG_ACC_BOOT1,
|
|
MMCSD_FMT_BOOT, 1, size, MMC_BOOT_RPMB_BLOCK_SIZE,
|
|
ro | ((ext_csd[EXT_CSD_BOOT_WP_STATUS] &
|
|
EXT_CSD_BOOT_WP_STATUS_BOOT1_MASK) != 0));
|
|
}
|
|
|
|
/* Add RPMB partition, which also is of a fixed multiple of 128 KB. */
|
|
size = ext_csd[EXT_CSD_RPMB_MULT] * MMC_BOOT_RPMB_BLOCK_SIZE;
|
|
if (rev >= 5 && size > 0)
|
|
mmcsd_add_part(sc, EXT_CSD_PART_CONFIG_ACC_RPMB,
|
|
MMCSD_FMT_RPMB, 0, size, MMC_BOOT_RPMB_BLOCK_SIZE, ro);
|
|
|
|
if (rev <= 3 || comp == FALSE)
|
|
return (0);
|
|
|
|
/*
|
|
* Add general purpose partitions, which are of a multiple of high
|
|
* capacity write protect groups, too.
|
|
*/
|
|
if ((ext_csd[EXT_CSD_PART_SUPPORT] & EXT_CSD_PART_SUPPORT_EN) != 0) {
|
|
erase_size = ext_csd[EXT_CSD_ERASE_GRP_SIZE] * 1024 *
|
|
MMC_SECTOR_SIZE;
|
|
wp_size = ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
|
|
for (i = 0; i < MMC_PART_GP_MAX; i++) {
|
|
size = ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3] +
|
|
(ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3 + 1] << 8) +
|
|
(ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3 + 2] << 16);
|
|
if (size == 0)
|
|
continue;
|
|
mmcsd_add_part(sc, EXT_CSD_PART_CONFIG_ACC_GP0 + i,
|
|
MMCSD_FMT_GP, i, size * erase_size * wp_size,
|
|
erase_size, ro);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static uintmax_t
|
|
mmcsd_pretty_size(off_t size, char *unit)
|
|
{
|
|
uintmax_t bytes;
|
|
int i;
|
|
|
|
/*
|
|
* Display in most natural units. There's no card < 1MB. However,
|
|
* RPMB partitions occasionally are smaller than that, though. The
|
|
* SD standard goes to 2 GiB due to its reliance on FAT, but the data
|
|
* format supports up to 4 GiB and some card makers push it up to this
|
|
* limit. The SDHC standard only goes to 32 GiB due to FAT32, but the
|
|
* data format supports up to 2 TiB however. 2048 GB isn't too ugly,
|
|
* so we note it in passing here and don't add the code to print TB).
|
|
* Since these cards are sold in terms of MB and GB not MiB and GiB,
|
|
* report them like that. We also round to the nearest unit, since
|
|
* many cards are a few percent short, even of the power of 10 size.
|
|
*/
|
|
bytes = size;
|
|
unit[0] = unit[1] = '\0';
|
|
for (i = 0; i <= 2 && bytes >= 1000; i++) {
|
|
bytes = (bytes + 1000 / 2 - 1) / 1000;
|
|
switch (i) {
|
|
case 0:
|
|
unit[0] = 'k';
|
|
break;
|
|
case 1:
|
|
unit[0] = 'M';
|
|
break;
|
|
case 2:
|
|
unit[0] = 'G';
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
return (bytes);
|
|
}
|
|
|
|
static struct cdevsw mmcsd_rpmb_cdevsw = {
|
|
.d_version = D_VERSION,
|
|
.d_name = "mmcsdrpmb",
|
|
.d_ioctl = mmcsd_ioctl_rpmb
|
|
};
|
|
|
|
static void
|
|
mmcsd_add_part(struct mmcsd_softc *sc, u_int type, const char *name, u_int cnt,
|
|
off_t media_size, off_t erase_size, bool ro)
|
|
{
|
|
struct make_dev_args args;
|
|
device_t dev, mmcbr;
|
|
const char *ext;
|
|
const uint8_t *ext_csd;
|
|
struct mmcsd_part *part;
|
|
struct disk *d;
|
|
uintmax_t bytes;
|
|
u_int gp;
|
|
uint32_t speed;
|
|
uint8_t extattr;
|
|
bool enh;
|
|
char unit[2];
|
|
|
|
dev = sc->dev;
|
|
mmcbr = sc->mmcbr;
|
|
part = sc->part[type] = malloc(sizeof(*part), M_DEVBUF,
|
|
M_WAITOK | M_ZERO);
|
|
part->sc = sc;
|
|
part->cnt = cnt;
|
|
part->type = type;
|
|
part->ro = ro;
|
|
snprintf(part->name, sizeof(part->name), name, device_get_unit(dev));
|
|
|
|
/* For the RPMB partition, allow IOCTL access only. */
|
|
if (type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
|
|
make_dev_args_init(&args);
|
|
args.mda_flags = MAKEDEV_CHECKNAME | MAKEDEV_WAITOK;
|
|
args.mda_devsw = &mmcsd_rpmb_cdevsw;
|
|
args.mda_uid = UID_ROOT;
|
|
args.mda_gid = GID_OPERATOR;
|
|
args.mda_mode = 0640;
|
|
args.mda_si_drv1 = part;
|
|
if (make_dev_s(&args, &sc->rpmb_dev, "%s", part->name) != 0) {
|
|
device_printf(dev, "Failed to make RPMB device\n");
|
|
free(part, M_DEVBUF);
|
|
return;
|
|
}
|
|
} else {
|
|
MMCSD_PART_LOCK_INIT(part);
|
|
|
|
d = part->disk = disk_alloc();
|
|
d->d_open = mmcsd_open;
|
|
d->d_close = mmcsd_close;
|
|
d->d_strategy = mmcsd_strategy;
|
|
d->d_ioctl = mmcsd_ioctl_disk;
|
|
d->d_dump = mmcsd_dump;
|
|
d->d_getattr = mmcsd_getattr;
|
|
d->d_name = part->name;
|
|
d->d_drv1 = part;
|
|
d->d_sectorsize = mmc_get_sector_size(dev);
|
|
d->d_maxsize = mmc_get_max_data(dev) * d->d_sectorsize;
|
|
d->d_mediasize = media_size;
|
|
d->d_stripesize = erase_size;
|
|
d->d_unit = cnt;
|
|
d->d_flags = DISKFLAG_CANDELETE;
|
|
d->d_delmaxsize = erase_size;
|
|
strlcpy(d->d_ident, mmc_get_card_sn_string(dev),
|
|
sizeof(d->d_ident));
|
|
strlcpy(d->d_descr, mmc_get_card_id_string(dev),
|
|
sizeof(d->d_descr));
|
|
d->d_rotation_rate = DISK_RR_NON_ROTATING;
|
|
|
|
disk_create(d, DISK_VERSION);
|
|
bioq_init(&part->bio_queue);
|
|
|
|
part->running = 1;
|
|
kproc_create(&mmcsd_task, part, &part->p, 0, 0,
|
|
"%s%d: mmc/sd card", part->name, cnt);
|
|
}
|
|
|
|
bytes = mmcsd_pretty_size(media_size, unit);
|
|
if (type == EXT_CSD_PART_CONFIG_ACC_DEFAULT) {
|
|
speed = mmcbr_get_clock(mmcbr);
|
|
printf("%s%d: %ju%sB <%s>%s at %s %d.%01dMHz/%dbit/%d-block\n",
|
|
part->name, cnt, bytes, unit, mmc_get_card_id_string(dev),
|
|
ro ? " (read-only)" : "", device_get_nameunit(mmcbr),
|
|
speed / 1000000, (speed / 100000) % 10,
|
|
mmcsd_bus_bit_width(dev), mmc_get_max_data(dev));
|
|
} else if (type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
|
|
printf("%s: %ju%sB partion %d%s at %s\n", part->name, bytes,
|
|
unit, type, ro ? " (read-only)" : "",
|
|
device_get_nameunit(dev));
|
|
} else {
|
|
enh = false;
|
|
ext = NULL;
|
|
extattr = 0;
|
|
if (type >= EXT_CSD_PART_CONFIG_ACC_GP0 &&
|
|
type <= EXT_CSD_PART_CONFIG_ACC_GP3) {
|
|
ext_csd = sc->ext_csd;
|
|
gp = type - EXT_CSD_PART_CONFIG_ACC_GP0;
|
|
if ((ext_csd[EXT_CSD_PART_SUPPORT] &
|
|
EXT_CSD_PART_SUPPORT_ENH_ATTR_EN) != 0 &&
|
|
(ext_csd[EXT_CSD_PART_ATTR] &
|
|
(EXT_CSD_PART_ATTR_ENH_GP0 << gp)) != 0)
|
|
enh = true;
|
|
else if ((ext_csd[EXT_CSD_PART_SUPPORT] &
|
|
EXT_CSD_PART_SUPPORT_EXT_ATTR_EN) != 0) {
|
|
extattr = (ext_csd[EXT_CSD_EXT_PART_ATTR +
|
|
(gp / 2)] >> (4 * (gp % 2))) & 0xF;
|
|
switch (extattr) {
|
|
case EXT_CSD_EXT_PART_ATTR_DEFAULT:
|
|
break;
|
|
case EXT_CSD_EXT_PART_ATTR_SYSTEMCODE:
|
|
ext = "system code";
|
|
break;
|
|
case EXT_CSD_EXT_PART_ATTR_NPERSISTENT:
|
|
ext = "non-persistent";
|
|
break;
|
|
default:
|
|
ext = "reserved";
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (ext == NULL)
|
|
printf("%s%d: %ju%sB partion %d%s%s at %s\n",
|
|
part->name, cnt, bytes, unit, type, enh ?
|
|
" enhanced" : "", ro ? " (read-only)" : "",
|
|
device_get_nameunit(dev));
|
|
else
|
|
printf("%s%d: %ju%sB partion %d extended 0x%x "
|
|
"(%s)%s at %s\n", part->name, cnt, bytes, unit,
|
|
type, extattr, ext, ro ? " (read-only)" : "",
|
|
device_get_nameunit(dev));
|
|
}
|
|
}
|
|
|
|
static int
|
|
mmcsd_slicer(device_t dev, const char *provider,
|
|
struct flash_slice *slices, int *nslices)
|
|
{
|
|
char name[MMCSD_PART_NAMELEN];
|
|
struct mmcsd_softc *sc;
|
|
struct mmcsd_part *part;
|
|
|
|
*nslices = 0;
|
|
if (slices == NULL)
|
|
return (ENOMEM);
|
|
|
|
sc = device_get_softc(dev);
|
|
if (sc->enh_size == 0)
|
|
return (ENXIO);
|
|
|
|
part = sc->part[EXT_CSD_PART_CONFIG_ACC_DEFAULT];
|
|
snprintf(name, sizeof(name), "%s%d", part->disk->d_name,
|
|
part->disk->d_unit);
|
|
if (strcmp(name, provider) != 0)
|
|
return (ENXIO);
|
|
|
|
*nslices = 1;
|
|
slices[0].base = sc->enh_base;
|
|
slices[0].size = sc->enh_size;
|
|
slices[0].label = MMCSD_LABEL_ENH;
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mmcsd_detach(device_t dev)
|
|
{
|
|
struct mmcsd_softc *sc = device_get_softc(dev);
|
|
struct mmcsd_part *part;
|
|
int i;
|
|
|
|
for (i = 0; i < MMC_PART_MAX; i++) {
|
|
part = sc->part[i];
|
|
if (part != NULL && part->disk != NULL) {
|
|
MMCSD_PART_LOCK(part);
|
|
part->suspend = 0;
|
|
if (part->running > 0) {
|
|
/* kill thread */
|
|
part->running = 0;
|
|
wakeup(part);
|
|
/* wait for thread to finish. */
|
|
while (part->running != -1)
|
|
msleep(part, &part->part_mtx, 0,
|
|
"detach", 0);
|
|
}
|
|
MMCSD_PART_UNLOCK(part);
|
|
}
|
|
}
|
|
|
|
if (sc->rpmb_dev != NULL)
|
|
destroy_dev(sc->rpmb_dev);
|
|
|
|
for (i = 0; i < MMC_PART_MAX; i++) {
|
|
part = sc->part[i];
|
|
if (part != NULL) {
|
|
if (part->disk != NULL) {
|
|
/* Flush the request queue. */
|
|
bioq_flush(&part->bio_queue, NULL, ENXIO);
|
|
/* kill disk */
|
|
disk_destroy(part->disk);
|
|
|
|
MMCSD_PART_LOCK_DESTROY(part);
|
|
}
|
|
free(part, M_DEVBUF);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mmcsd_suspend(device_t dev)
|
|
{
|
|
struct mmcsd_softc *sc = device_get_softc(dev);
|
|
struct mmcsd_part *part;
|
|
int i;
|
|
|
|
for (i = 0; i < MMC_PART_MAX; i++) {
|
|
part = sc->part[i];
|
|
if (part != NULL && part->disk != NULL) {
|
|
MMCSD_PART_LOCK(part);
|
|
part->suspend = 1;
|
|
if (part->running > 0) {
|
|
/* kill thread */
|
|
part->running = 0;
|
|
wakeup(part);
|
|
/* wait for thread to finish. */
|
|
while (part->running != -1)
|
|
msleep(part, &part->part_mtx, 0,
|
|
"detach", 0);
|
|
}
|
|
MMCSD_PART_UNLOCK(part);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mmcsd_resume(device_t dev)
|
|
{
|
|
struct mmcsd_softc *sc = device_get_softc(dev);
|
|
struct mmcsd_part *part;
|
|
int i;
|
|
|
|
for (i = 0; i < MMC_PART_MAX; i++) {
|
|
part = sc->part[i];
|
|
if (part != NULL && part->disk != NULL) {
|
|
MMCSD_PART_LOCK(part);
|
|
part->suspend = 0;
|
|
if (part->running <= 0) {
|
|
part->running = 1;
|
|
kproc_create(&mmcsd_task, part, &part->p, 0, 0,
|
|
"%s%d: mmc/sd card", part->name, part->cnt);
|
|
MMCSD_PART_UNLOCK(part);
|
|
} else
|
|
MMCSD_PART_UNLOCK(part);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mmcsd_open(struct disk *dp __unused)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mmcsd_close(struct disk *dp __unused)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
mmcsd_strategy(struct bio *bp)
|
|
{
|
|
struct mmcsd_softc *sc;
|
|
struct mmcsd_part *part;
|
|
|
|
part = bp->bio_disk->d_drv1;
|
|
sc = part->sc;
|
|
MMCSD_PART_LOCK(part);
|
|
if (part->running > 0 || part->suspend > 0) {
|
|
bioq_disksort(&part->bio_queue, bp);
|
|
MMCSD_PART_UNLOCK(part);
|
|
wakeup(part);
|
|
} else {
|
|
MMCSD_PART_UNLOCK(part);
|
|
biofinish(bp, NULL, ENXIO);
|
|
}
|
|
}
|
|
|
|
static int
|
|
mmcsd_ioctl_rpmb(struct cdev *dev, u_long cmd, caddr_t data,
|
|
int fflag, struct thread *td __unused)
|
|
{
|
|
|
|
return (mmcsd_ioctl(dev->si_drv1, cmd, data, fflag));
|
|
}
|
|
|
|
static int
|
|
mmcsd_ioctl_disk(struct disk *disk, u_long cmd, void *data, int fflag,
|
|
struct thread *td __unused)
|
|
{
|
|
|
|
return (mmcsd_ioctl(disk->d_drv1, cmd, data, fflag));
|
|
}
|
|
|
|
static int
|
|
mmcsd_ioctl(struct mmcsd_part *part, u_long cmd, void *data, int fflag)
|
|
{
|
|
struct mmc_ioc_cmd *mic;
|
|
struct mmc_ioc_multi_cmd *mimc;
|
|
int i, err;
|
|
u_long cnt, size;
|
|
|
|
if ((fflag & FREAD) == 0)
|
|
return (EBADF);
|
|
|
|
err = 0;
|
|
switch (cmd) {
|
|
case MMC_IOC_CMD:
|
|
mic = data;
|
|
err = mmcsd_ioctl_cmd(part, data, fflag);
|
|
break;
|
|
case MMC_IOC_CMD_MULTI:
|
|
mimc = data;
|
|
if (mimc->num_of_cmds == 0)
|
|
break;
|
|
if (mimc->num_of_cmds > MMC_IOC_MAX_CMDS)
|
|
return (EINVAL);
|
|
cnt = mimc->num_of_cmds;
|
|
size = sizeof(*mic) * cnt;
|
|
mic = malloc(size, M_TEMP, M_WAITOK);
|
|
err = copyin((const void *)mimc->cmds, mic, size);
|
|
if (err != 0)
|
|
break;
|
|
for (i = 0; i < cnt; i++) {
|
|
err = mmcsd_ioctl_cmd(part, &mic[i], fflag);
|
|
if (err != 0)
|
|
break;
|
|
}
|
|
free(mic, M_TEMP);
|
|
break;
|
|
default:
|
|
return (ENOIOCTL);
|
|
}
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
mmcsd_ioctl_cmd(struct mmcsd_part *part, struct mmc_ioc_cmd *mic, int fflag)
|
|
{
|
|
struct mmc_command cmd;
|
|
struct mmc_data data;
|
|
struct mmcsd_softc *sc;
|
|
device_t dev, mmcbr;
|
|
void *dp;
|
|
u_long len;
|
|
int err, retries;
|
|
uint32_t status;
|
|
uint16_t rca;
|
|
|
|
if ((fflag & FWRITE) == 0 && mic->write_flag != 0)
|
|
return (EBADF);
|
|
|
|
if (part->ro == TRUE && mic->write_flag != 0)
|
|
return (EROFS);
|
|
|
|
err = 0;
|
|
dp = NULL;
|
|
len = mic->blksz * mic->blocks;
|
|
if (len > MMC_IOC_MAX_BYTES)
|
|
return (EOVERFLOW);
|
|
if (len != 0) {
|
|
dp = malloc(len, M_TEMP, M_WAITOK);
|
|
err = copyin((void *)(uintptr_t)mic->data_ptr, dp, len);
|
|
if (err != 0)
|
|
goto out;
|
|
}
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(&data, 0, sizeof(data));
|
|
cmd.opcode = mic->opcode;
|
|
cmd.arg = mic->arg;
|
|
cmd.flags = mic->flags;
|
|
if (len != 0) {
|
|
data.len = len;
|
|
data.data = dp;
|
|
data.flags = mic->write_flag != 0 ? MMC_DATA_WRITE :
|
|
MMC_DATA_READ;
|
|
cmd.data = &data;
|
|
}
|
|
sc = part->sc;
|
|
rca = sc->rca;
|
|
if (mic->is_acmd == 0) {
|
|
/* Enforce/patch/restrict RCA-based commands */
|
|
switch (cmd.opcode) {
|
|
case MMC_SET_RELATIVE_ADDR:
|
|
case MMC_SELECT_CARD:
|
|
err = EPERM;
|
|
goto out;
|
|
case MMC_STOP_TRANSMISSION:
|
|
if ((cmd.arg & 0x1) == 0)
|
|
break;
|
|
/* FALLTHROUGH */
|
|
case MMC_SLEEP_AWAKE:
|
|
case MMC_SEND_CSD:
|
|
case MMC_SEND_CID:
|
|
case MMC_SEND_STATUS:
|
|
case MMC_GO_INACTIVE_STATE:
|
|
case MMC_FAST_IO:
|
|
case MMC_APP_CMD:
|
|
cmd.arg = (cmd.arg & 0x0000FFFF) | (rca << 16);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
dev = sc->dev;
|
|
mmcbr = sc->mmcbr;
|
|
MMCBUS_ACQUIRE_BUS(mmcbr, dev);
|
|
err = mmcsd_switch_part(mmcbr, dev, rca, part->type);
|
|
if (err != MMC_ERR_NONE)
|
|
goto release;
|
|
if (part->type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
|
|
err = mmcsd_set_blockcount(sc, mic->blocks,
|
|
mic->write_flag & (1 << 31));
|
|
if (err != MMC_ERR_NONE)
|
|
goto release;
|
|
}
|
|
if (mic->is_acmd != 0)
|
|
(void)mmc_wait_for_app_cmd(mmcbr, dev, rca, &cmd, 0);
|
|
else
|
|
(void)mmc_wait_for_cmd(mmcbr, dev, &cmd, 0);
|
|
if (part->type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
|
|
/*
|
|
* If the request went to the RPMB partition, try to ensure
|
|
* that the command actually has completed ...
|
|
*/
|
|
retries = MMCSD_CMD_RETRIES;
|
|
do {
|
|
err = mmc_send_status(mmcbr, dev, rca, &status);
|
|
if (err != MMC_ERR_NONE)
|
|
break;
|
|
if (R1_STATUS(status) == 0 &&
|
|
R1_CURRENT_STATE(status) != R1_STATE_PRG)
|
|
break;
|
|
DELAY(1000);
|
|
} while (retries-- > 0);
|
|
|
|
/* ... and always switch back to the default partition. */
|
|
err = mmcsd_switch_part(mmcbr, dev, rca,
|
|
EXT_CSD_PART_CONFIG_ACC_DEFAULT);
|
|
if (err != MMC_ERR_NONE)
|
|
goto release;
|
|
}
|
|
/*
|
|
* If EXT_CSD was changed, our copy is outdated now. Specifically,
|
|
* the upper bits of EXT_CSD_PART_CONFIG used in mmcsd_switch_part(),
|
|
* so retrieve EXT_CSD again.
|
|
*/
|
|
if (cmd.opcode == MMC_SWITCH_FUNC) {
|
|
err = mmc_send_ext_csd(mmcbr, dev, sc->ext_csd);
|
|
if (err != MMC_ERR_NONE)
|
|
goto release;
|
|
}
|
|
MMCBUS_RELEASE_BUS(mmcbr, dev);
|
|
if (cmd.error != MMC_ERR_NONE) {
|
|
switch (cmd.error) {
|
|
case MMC_ERR_TIMEOUT:
|
|
err = ETIMEDOUT;
|
|
break;
|
|
case MMC_ERR_BADCRC:
|
|
err = EILSEQ;
|
|
break;
|
|
case MMC_ERR_INVALID:
|
|
err = EINVAL;
|
|
break;
|
|
case MMC_ERR_NO_MEMORY:
|
|
err = ENOMEM;
|
|
break;
|
|
default:
|
|
err = EIO;
|
|
break;
|
|
}
|
|
goto out;
|
|
}
|
|
memcpy(mic->response, cmd.resp, 4 * sizeof(uint32_t));
|
|
if (mic->write_flag == 0 && len != 0) {
|
|
err = copyout(dp, (void *)(uintptr_t)mic->data_ptr, len);
|
|
if (err != 0)
|
|
goto out;
|
|
}
|
|
goto out;
|
|
|
|
release:
|
|
MMCBUS_RELEASE_BUS(mmcbr, dev);
|
|
err = EIO;
|
|
|
|
out:
|
|
if (dp != NULL)
|
|
free(dp, M_TEMP);
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
mmcsd_getattr(struct bio *bp)
|
|
{
|
|
struct mmcsd_part *part;
|
|
device_t dev;
|
|
|
|
if (strcmp(bp->bio_attribute, "MMC::device") == 0) {
|
|
if (bp->bio_length != sizeof(dev))
|
|
return (EFAULT);
|
|
part = bp->bio_disk->d_drv1;
|
|
dev = part->sc->dev;
|
|
bcopy(&dev, bp->bio_data, sizeof(dev));
|
|
bp->bio_completed = bp->bio_length;
|
|
return (0);
|
|
}
|
|
return (-1);
|
|
}
|
|
|
|
static int
|
|
mmcsd_set_blockcount(struct mmcsd_softc *sc, u_int count, bool reliable)
|
|
{
|
|
struct mmc_command cmd;
|
|
struct mmc_request req;
|
|
|
|
memset(&req, 0, sizeof(req));
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.mrq = &req;
|
|
req.cmd = &cmd;
|
|
cmd.opcode = MMC_SET_BLOCK_COUNT;
|
|
cmd.arg = count & 0x0000FFFF;
|
|
if (reliable)
|
|
cmd.arg |= 1 << 31;
|
|
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
MMCBUS_WAIT_FOR_REQUEST(sc->mmcbr, sc->dev, &req);
|
|
return (cmd.error);
|
|
}
|
|
|
|
static int
|
|
mmcsd_switch_part(device_t bus, device_t dev, uint16_t rca, u_int part)
|
|
{
|
|
struct mmcsd_softc *sc;
|
|
int err;
|
|
uint8_t value;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->part_curr == part)
|
|
return (MMC_ERR_NONE);
|
|
|
|
if (sc->mode == mode_sd)
|
|
return (MMC_ERR_NONE);
|
|
|
|
value = (sc->ext_csd[EXT_CSD_PART_CONFIG] &
|
|
~EXT_CSD_PART_CONFIG_ACC_MASK) | part;
|
|
/* Jump! */
|
|
err = mmc_switch(bus, dev, rca, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_PART_CONFIG, value, sc->part_time, true);
|
|
if (err != MMC_ERR_NONE)
|
|
return (err);
|
|
|
|
sc->ext_csd[EXT_CSD_PART_CONFIG] = value;
|
|
sc->part_curr = part;
|
|
return (MMC_ERR_NONE);
|
|
}
|
|
|
|
static const char *
|
|
mmcsd_errmsg(int e)
|
|
{
|
|
|
|
if (e < 0 || e > MMC_ERR_MAX)
|
|
return "Bad error code";
|
|
return errmsg[e];
|
|
}
|
|
|
|
static daddr_t
|
|
mmcsd_rw(struct mmcsd_part *part, struct bio *bp)
|
|
{
|
|
daddr_t block, end;
|
|
struct mmc_command cmd;
|
|
struct mmc_command stop;
|
|
struct mmc_request req;
|
|
struct mmc_data data;
|
|
struct mmcsd_softc *sc;
|
|
device_t dev, mmcbr;
|
|
int numblocks, sz;
|
|
char *vaddr;
|
|
|
|
sc = part->sc;
|
|
dev = sc->dev;
|
|
mmcbr = sc->mmcbr;
|
|
|
|
block = bp->bio_pblkno;
|
|
sz = part->disk->d_sectorsize;
|
|
end = bp->bio_pblkno + (bp->bio_bcount / sz);
|
|
while (block < end) {
|
|
vaddr = bp->bio_data + (block - bp->bio_pblkno) * sz;
|
|
numblocks = min(end - block, mmc_get_max_data(dev));
|
|
memset(&req, 0, sizeof(req));
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(&stop, 0, sizeof(stop));
|
|
memset(&data, 0, sizeof(data));
|
|
cmd.mrq = &req;
|
|
req.cmd = &cmd;
|
|
cmd.data = &data;
|
|
if (bp->bio_cmd == BIO_READ) {
|
|
if (numblocks > 1)
|
|
cmd.opcode = MMC_READ_MULTIPLE_BLOCK;
|
|
else
|
|
cmd.opcode = MMC_READ_SINGLE_BLOCK;
|
|
} else {
|
|
if (numblocks > 1)
|
|
cmd.opcode = MMC_WRITE_MULTIPLE_BLOCK;
|
|
else
|
|
cmd.opcode = MMC_WRITE_BLOCK;
|
|
}
|
|
cmd.arg = block;
|
|
if (!mmc_get_high_cap(dev))
|
|
cmd.arg <<= 9;
|
|
cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
|
|
data.data = vaddr;
|
|
data.mrq = &req;
|
|
if (bp->bio_cmd == BIO_READ)
|
|
data.flags = MMC_DATA_READ;
|
|
else
|
|
data.flags = MMC_DATA_WRITE;
|
|
data.len = numblocks * sz;
|
|
if (numblocks > 1) {
|
|
data.flags |= MMC_DATA_MULTI;
|
|
stop.opcode = MMC_STOP_TRANSMISSION;
|
|
stop.arg = 0;
|
|
stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
|
|
stop.mrq = &req;
|
|
req.stop = &stop;
|
|
}
|
|
MMCBUS_WAIT_FOR_REQUEST(mmcbr, dev, &req);
|
|
if (req.cmd->error != MMC_ERR_NONE) {
|
|
if (ppsratecheck(&sc->log_time, &sc->log_count,
|
|
LOG_PPS))
|
|
device_printf(dev, "Error indicated: %d %s\n",
|
|
req.cmd->error,
|
|
mmcsd_errmsg(req.cmd->error));
|
|
break;
|
|
}
|
|
block += numblocks;
|
|
}
|
|
return (block);
|
|
}
|
|
|
|
static daddr_t
|
|
mmcsd_delete(struct mmcsd_part *part, struct bio *bp)
|
|
{
|
|
daddr_t block, end, start, stop;
|
|
struct mmc_command cmd;
|
|
struct mmc_request req;
|
|
struct mmcsd_softc *sc;
|
|
device_t dev, mmcbr;
|
|
int erase_sector, sz;
|
|
|
|
sc = part->sc;
|
|
dev = sc->dev;
|
|
mmcbr = sc->mmcbr;
|
|
|
|
block = bp->bio_pblkno;
|
|
sz = part->disk->d_sectorsize;
|
|
end = bp->bio_pblkno + (bp->bio_bcount / sz);
|
|
/* Coalesce with part remaining from previous request. */
|
|
if (block > part->eblock && block <= part->eend)
|
|
block = part->eblock;
|
|
if (end >= part->eblock && end < part->eend)
|
|
end = part->eend;
|
|
/* Safe round to the erase sector boundaries. */
|
|
erase_sector = mmc_get_erase_sector(dev);
|
|
start = block + erase_sector - 1; /* Round up. */
|
|
start -= start % erase_sector;
|
|
stop = end; /* Round down. */
|
|
stop -= end % erase_sector;
|
|
/* We can't erase an area smaller than a sector, store it for later. */
|
|
if (start >= stop) {
|
|
part->eblock = block;
|
|
part->eend = end;
|
|
return (end);
|
|
}
|
|
|
|
/* Set erase start position. */
|
|
memset(&req, 0, sizeof(req));
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.mrq = &req;
|
|
req.cmd = &cmd;
|
|
if (mmc_get_card_type(dev) == mode_sd)
|
|
cmd.opcode = SD_ERASE_WR_BLK_START;
|
|
else
|
|
cmd.opcode = MMC_ERASE_GROUP_START;
|
|
cmd.arg = start;
|
|
if (!mmc_get_high_cap(dev))
|
|
cmd.arg <<= 9;
|
|
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
MMCBUS_WAIT_FOR_REQUEST(mmcbr, dev, &req);
|
|
if (req.cmd->error != MMC_ERR_NONE) {
|
|
printf("erase err1: %d\n", req.cmd->error);
|
|
return (block);
|
|
}
|
|
/* Set erase stop position. */
|
|
memset(&req, 0, sizeof(req));
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
req.cmd = &cmd;
|
|
if (mmc_get_card_type(dev) == mode_sd)
|
|
cmd.opcode = SD_ERASE_WR_BLK_END;
|
|
else
|
|
cmd.opcode = MMC_ERASE_GROUP_END;
|
|
cmd.arg = stop;
|
|
if (!mmc_get_high_cap(dev))
|
|
cmd.arg <<= 9;
|
|
cmd.arg--;
|
|
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
MMCBUS_WAIT_FOR_REQUEST(mmcbr, dev, &req);
|
|
if (req.cmd->error != MMC_ERR_NONE) {
|
|
printf("erase err2: %d\n", req.cmd->error);
|
|
return (block);
|
|
}
|
|
/* Erase range. */
|
|
memset(&req, 0, sizeof(req));
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
req.cmd = &cmd;
|
|
cmd.opcode = MMC_ERASE;
|
|
cmd.arg = 0;
|
|
cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
|
|
MMCBUS_WAIT_FOR_REQUEST(mmcbr, dev, &req);
|
|
if (req.cmd->error != MMC_ERR_NONE) {
|
|
printf("erase err3 %d\n", req.cmd->error);
|
|
return (block);
|
|
}
|
|
/* Store one of remaining parts for the next call. */
|
|
if (bp->bio_pblkno >= part->eblock || block == start) {
|
|
part->eblock = stop; /* Predict next forward. */
|
|
part->eend = end;
|
|
} else {
|
|
part->eblock = block; /* Predict next backward. */
|
|
part->eend = start;
|
|
}
|
|
return (end);
|
|
}
|
|
|
|
static int
|
|
mmcsd_dump(void *arg, void *virtual, vm_offset_t physical, off_t offset,
|
|
size_t length)
|
|
{
|
|
struct bio bp;
|
|
daddr_t block, end;
|
|
struct disk *disk;
|
|
struct mmcsd_softc *sc;
|
|
struct mmcsd_part *part;
|
|
device_t dev, mmcbr;
|
|
int err;
|
|
|
|
/* length zero is special and really means flush buffers to media */
|
|
if (!length)
|
|
return (0);
|
|
|
|
disk = arg;
|
|
part = disk->d_drv1;
|
|
sc = part->sc;
|
|
dev = sc->dev;
|
|
mmcbr = sc->mmcbr;
|
|
|
|
g_reset_bio(&bp);
|
|
bp.bio_disk = disk;
|
|
bp.bio_pblkno = offset / disk->d_sectorsize;
|
|
bp.bio_bcount = length;
|
|
bp.bio_data = virtual;
|
|
bp.bio_cmd = BIO_WRITE;
|
|
end = bp.bio_pblkno + bp.bio_bcount / disk->d_sectorsize;
|
|
MMCBUS_ACQUIRE_BUS(mmcbr, dev);
|
|
err = mmcsd_switch_part(mmcbr, dev, sc->rca, part->type);
|
|
if (err != MMC_ERR_NONE) {
|
|
if (ppsratecheck(&sc->log_time, &sc->log_count, LOG_PPS))
|
|
device_printf(dev, "Partition switch error\n");
|
|
MMCBUS_RELEASE_BUS(mmcbr, dev);
|
|
return (EIO);
|
|
}
|
|
block = mmcsd_rw(part, &bp);
|
|
MMCBUS_RELEASE_BUS(mmcbr, dev);
|
|
return ((end < block) ? EIO : 0);
|
|
}
|
|
|
|
static void
|
|
mmcsd_task(void *arg)
|
|
{
|
|
daddr_t block, end;
|
|
struct mmcsd_part *part;
|
|
struct mmcsd_softc *sc;
|
|
struct bio *bp;
|
|
device_t dev, mmcbr;
|
|
int err, sz;
|
|
|
|
part = arg;
|
|
sc = part->sc;
|
|
dev = sc->dev;
|
|
mmcbr = sc->mmcbr;
|
|
|
|
while (1) {
|
|
MMCSD_PART_LOCK(part);
|
|
do {
|
|
if (part->running == 0)
|
|
goto out;
|
|
bp = bioq_takefirst(&part->bio_queue);
|
|
if (bp == NULL)
|
|
msleep(part, &part->part_mtx, PRIBIO,
|
|
"jobqueue", 0);
|
|
} while (bp == NULL);
|
|
MMCSD_PART_UNLOCK(part);
|
|
if (bp->bio_cmd != BIO_READ && part->ro) {
|
|
bp->bio_error = EROFS;
|
|
bp->bio_resid = bp->bio_bcount;
|
|
bp->bio_flags |= BIO_ERROR;
|
|
biodone(bp);
|
|
continue;
|
|
}
|
|
MMCBUS_ACQUIRE_BUS(mmcbr, dev);
|
|
sz = part->disk->d_sectorsize;
|
|
block = bp->bio_pblkno;
|
|
end = bp->bio_pblkno + (bp->bio_bcount / sz);
|
|
err = mmcsd_switch_part(mmcbr, dev, sc->rca, part->type);
|
|
if (err != MMC_ERR_NONE) {
|
|
if (ppsratecheck(&sc->log_time, &sc->log_count,
|
|
LOG_PPS))
|
|
device_printf(dev, "Partition switch error\n");
|
|
goto release;
|
|
}
|
|
if (bp->bio_cmd == BIO_READ || bp->bio_cmd == BIO_WRITE) {
|
|
/* Access to the remaining erase block obsoletes it. */
|
|
if (block < part->eend && end > part->eblock)
|
|
part->eblock = part->eend = 0;
|
|
block = mmcsd_rw(part, bp);
|
|
} else if (bp->bio_cmd == BIO_DELETE) {
|
|
block = mmcsd_delete(part, bp);
|
|
}
|
|
release:
|
|
MMCBUS_RELEASE_BUS(mmcbr, dev);
|
|
if (block < end) {
|
|
bp->bio_error = EIO;
|
|
bp->bio_resid = (end - block) * sz;
|
|
bp->bio_flags |= BIO_ERROR;
|
|
} else {
|
|
bp->bio_resid = 0;
|
|
}
|
|
biodone(bp);
|
|
}
|
|
out:
|
|
/* tell parent we're done */
|
|
part->running = -1;
|
|
MMCSD_PART_UNLOCK(part);
|
|
wakeup(part);
|
|
|
|
kproc_exit(0);
|
|
}
|
|
|
|
static int
|
|
mmcsd_bus_bit_width(device_t dev)
|
|
{
|
|
|
|
if (mmc_get_bus_width(dev) == bus_width_1)
|
|
return (1);
|
|
if (mmc_get_bus_width(dev) == bus_width_4)
|
|
return (4);
|
|
return (8);
|
|
}
|
|
|
|
static device_method_t mmcsd_methods[] = {
|
|
DEVMETHOD(device_probe, mmcsd_probe),
|
|
DEVMETHOD(device_attach, mmcsd_attach),
|
|
DEVMETHOD(device_detach, mmcsd_detach),
|
|
DEVMETHOD(device_suspend, mmcsd_suspend),
|
|
DEVMETHOD(device_resume, mmcsd_resume),
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t mmcsd_driver = {
|
|
"mmcsd",
|
|
mmcsd_methods,
|
|
sizeof(struct mmcsd_softc),
|
|
};
|
|
static devclass_t mmcsd_devclass;
|
|
|
|
static int
|
|
mmcsd_handler(module_t mod __unused, int what, void *arg __unused)
|
|
{
|
|
|
|
switch (what) {
|
|
case MOD_LOAD:
|
|
flash_register_slicer(mmcsd_slicer, FLASH_SLICES_TYPE_MMC,
|
|
TRUE);
|
|
return (0);
|
|
case MOD_UNLOAD:
|
|
flash_register_slicer(NULL, FLASH_SLICES_TYPE_MMC, TRUE);
|
|
return (0);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
DRIVER_MODULE(mmcsd, mmc, mmcsd_driver, mmcsd_devclass, mmcsd_handler, NULL);
|
|
MODULE_DEPEND(mmcsd, g_flashmap, 0, 0, 0);
|
|
MMC_DEPEND(mmcsd);
|