freebsd-skq/sys/dev/ctau/lxt318.h
Roman Kurakin cee1270c1a Add support for Cronyx-Tau. For now I added only Tau-ISA files, system files
would be changed in next patches, after extra verifications.

Approved by: imp (mentor)
2004-02-23 20:19:00 +00:00

45 lines
1.4 KiB
C

/*
* Level One LXT318 E1 transceiver registers.
* Crystal CS61318 E1 Line Interface Unit registers.
* Crystal CS61581 T1/E1 Line Interface Unit registers.
*
* Copyright (C) 1996 Cronyx Engineering.
* Author: Serge Vakulenko, <vak@cronyx.ru>
*
* Copyright (C) 2003 Cronyx Engineering.
* Author: Roman Kurakin, <rik@cronyx.ru>
*
* This software is distributed with NO WARRANTIES, not even the implied
* warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* Authors grant any other persons or organisations permission to use
* or modify this software as long as this message is kept with the software,
* all derivative works or modified versions.
*
* Cronyx Id: lxt318.h,v 1.2.4.4 2003/11/14 19:08:45 rik Exp $
* $FreeBSD$
*/
#define LX_WRITE 0x00
#define LX_READ 0x01
#define LX_CCR1 0x10
#define LX_CCR2 0x11 /* CS61318 */
#define LX_EQGAIN 0x12 /* CS61318 */
#define LX_RAM 0x13 /* CS61318 */
#define LX_CCR3 0x14 /* CS61581 */
#define LX_DPEC 0x15 /* CS61581 */
#define LX_LOS 0x01 /* loss of signal condition */
#define LX_HDB3 0x04 /* HDB3 encoding enable */
#define LX_RLOOP 0x20 /* remote loopback */
#define LX_LLOOP 0x40 /* local loopback */
#define LX_TAOS 0x80 /* transmit all ones */
#define LX_RESET (LX_RLOOP | LX_LLOOP) /* reset the chip */
#define LX_CCR2_LH 0x00 /* Long Haul mode */
#define LX_CCR2_SH 0x01 /* Long Haul mode */
#define LX_CCR3_E1_LH 0x60 /* Long Haul mode */