freebsd-skq/sys/dev/ida/ida.c
Matthew N. Dodd fe0d408987 Remove the 'ivars' arguement to device_add_child() and
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
1999-12-03 08:41:24 +00:00

514 lines
13 KiB
C

/*-
* Copyright (c) 1999 Jonathan Lemon
* All rights reserved.
*
# Derived from the original IDA Compaq RAID driver, which is
* Copyright (c) 1996, 1997, 1998, 1999
* Mark Dawson and David James. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Generic driver for Compaq SMART RAID adapters.
*
* Specific probe routines are in:
* pci/ida_pci.c
* i386/eisa/ida_eisa.c
*/
#include <pci.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/buf.h>
#include <sys/bus.h>
#include <sys/devicestat.h>
#if NPCI > 0
#include <machine/bus_memio.h>
#endif
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/clock.h>
#include <sys/rman.h>
#include <dev/ida/idareg.h>
#include <dev/ida/idavar.h>
#define ida_inl(ida, port) \
bus_space_read_4((ida)->tag, (ida)->bsh, port)
#define ida_outl(ida, port, val) \
bus_space_write_4((ida)->tag, (ida)->bsh, port, val)
/* prototypes */
static void ida_alloc_qcb(struct ida_softc *ida);
static void ida_construct_qcb(struct ida_softc *ida);
static void ida_start(struct ida_softc *ida);
static void ida_done(struct ida_softc *ida, struct ida_qcb *qcb);
static void ida_wait(struct ida_softc *ida, struct ida_qcb *qcb, int delay);
void
ida_free(struct ida_softc *ida)
{
/*
* still need to call bus_dmamap_destroy() for each map created
* in ida_alloc_qcb().
*/
if (ida->hwqcb_busaddr)
bus_dmamap_unload(ida->hwqcb_dmat, ida->hwqcb_dmamap);
if (ida->hwqcbs)
bus_dmamem_free(ida->hwqcb_dmat, ida->hwqcbs,
ida->hwqcb_dmamap);
if (ida->buffer_dmat)
bus_dma_tag_destroy(ida->buffer_dmat);
if (ida->hwqcb_dmat)
bus_dma_tag_destroy(ida->hwqcb_dmat);
if (ida->qcbs != NULL)
free(ida->qcbs, M_DEVBUF);
if (ida->ih != NULL)
bus_teardown_intr(ida->dev, ida->irq, ida->ih);
if (ida->irq != NULL)
bus_release_resource(ida->dev, ida->irq_res_type,
0, ida->irq);
if (ida->parent_dmat != NULL)
bus_dma_tag_destroy(ida->parent_dmat);
if (ida->regs != NULL)
bus_release_resource(ida->dev, ida->regs_res_type,
ida->regs_res_id, ida->regs);
}
/*
* record bus address from bus_dmamap_load
*/
static void
ida_dma_map_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
bus_addr_t *baddr;
baddr = (bus_addr_t *)arg;
*baddr = segs->ds_addr;
}
static __inline struct ida_qcb *
ida_get_qcb(struct ida_softc *ida)
{
struct ida_qcb *qcb;
if ((qcb = SLIST_FIRST(&ida->free_qcbs)) != NULL) {
SLIST_REMOVE_HEAD(&ida->free_qcbs, link.sle);
} else {
ida_alloc_qcb(ida);
if ((qcb = SLIST_FIRST(&ida->free_qcbs)) != NULL)
SLIST_REMOVE_HEAD(&ida->free_qcbs, link.sle);
}
return (qcb);
}
/*
* XXX
* since we allocate all QCB space up front during initialization, then
* why bother with this routine?
*/
static void
ida_alloc_qcb(struct ida_softc *ida)
{
struct ida_qcb *qcb;
int error;
if (ida->num_qcbs >= IDA_QCB_MAX)
return;
qcb = &ida->qcbs[ida->num_qcbs];
error = bus_dmamap_create(ida->buffer_dmat, /*flags*/0, &qcb->dmamap);
if (error != 0)
return;
qcb->flags = QCB_FREE;
qcb->hwqcb = &ida->hwqcbs[ida->num_qcbs];
qcb->hwqcb->qcb = qcb;
SLIST_INSERT_HEAD(&ida->free_qcbs, qcb, link.sle);
ida->num_qcbs++;
}
int
ida_init(struct ida_softc *ida)
{
int error;
ida->unit = device_get_unit(ida->dev);
ida->tag = rman_get_bustag(ida->regs);
ida->bsh = rman_get_bushandle(ida->regs);
SLIST_INIT(&ida->free_qcbs);
STAILQ_INIT(&ida->qcb_queue);
bufq_init(&ida->buf_queue);
ida->qcbs = (struct ida_qcb *)
malloc(IDA_QCB_MAX * sizeof(struct ida_qcb), M_DEVBUF, M_NOWAIT);
if (ida->qcbs == NULL)
return (ENOMEM);
bzero(ida->qcbs, IDA_QCB_MAX * sizeof(struct ida_qcb));
/*
* Create our DMA tags
*/
/* DMA tag for our hardware QCB structures */
error = bus_dma_tag_create(ida->parent_dmat,
/*alignment*/1, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR, /*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
IDA_QCB_MAX * sizeof(struct ida_hardware_qcb),
/*nsegments*/1, /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
/*flags*/0, &ida->hwqcb_dmat);
if (error)
return (ENOMEM);
/* DMA tag for mapping buffers into device space */
error = bus_dma_tag_create(ida->parent_dmat,
/*alignment*/1, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR, /*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
/*maxsize*/MAXBSIZE, /*nsegments*/IDA_NSEG,
/*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, /*flags*/0, &ida->buffer_dmat);
if (error)
return (ENOMEM);
/* Allocation of hardware QCBs */
/* XXX allocation is rounded to hardware page size */
error = bus_dmamem_alloc(ida->hwqcb_dmat,
(void **)&ida->hwqcbs, BUS_DMA_NOWAIT, &ida->hwqcb_dmamap);
if (error)
return (ENOMEM);
/* And permanently map them in */
bus_dmamap_load(ida->hwqcb_dmat, ida->hwqcb_dmamap,
ida->hwqcbs, IDA_QCB_MAX * sizeof(struct ida_hardware_qcb),
ida_dma_map_cb, &ida->hwqcb_busaddr, /*flags*/0);
bzero(ida->hwqcbs, IDA_QCB_MAX * sizeof(struct ida_hardware_qcb));
ida_alloc_qcb(ida); /* allocate an initial qcb */
return (0);
}
void
ida_attach(struct ida_softc *ida)
{
struct ida_controller_info cinfo;
int error, i;
ida_outl(ida, R_INT_MASK, INT_DISABLE);
error = ida_command(ida, CMD_GET_CTRL_INFO, &cinfo, sizeof(cinfo),
IDA_CONTROLLER, DMA_DATA_IN);
if (error) {
device_printf(ida->dev, "CMD_GET_CTRL_INFO failed.\n");
return;
}
device_printf(ida->dev, "drives=%d firm_rev=%c%c%c%c\n",
cinfo.num_drvs, cinfo.firm_rev[0], cinfo.firm_rev[1],
cinfo.firm_rev[2], cinfo.firm_rev[3]);
ida->num_drives = cinfo.num_drvs;
for (i = 0; i < ida->num_drives; i++)
device_add_child(ida->dev, "id", i);
bus_generic_attach(ida->dev);
ida_outl(ida, R_INT_MASK, INT_ENABLE);
}
static void
ida_setup_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error)
{
struct ida_hardware_qcb *hwqcb = (struct ida_hardware_qcb *)arg;
int i;
hwqcb->hdr.size = (sizeof(struct ida_req) +
sizeof(struct ida_sgb) * IDA_NSEG) >> 2;
for (i = 0; i < nsegments; i++) {
hwqcb->seg[i].addr = segs[i].ds_addr;
hwqcb->seg[i].length = segs[i].ds_len;
}
hwqcb->req.sgcount = nsegments;
}
int
ida_command(struct ida_softc *ida, int command, void *data, int datasize,
int drive, int flags)
{
struct ida_hardware_qcb *hwqcb;
struct ida_qcb *qcb;
bus_dmasync_op_t op;
int s;
s = splbio();
qcb = ida_get_qcb(ida);
splx(s);
if (qcb == NULL) {
printf("ida_command: out of QCBs");
return (1);
}
hwqcb = qcb->hwqcb;
bzero(hwqcb, sizeof(struct ida_hdr) + sizeof(struct ida_req));
bus_dmamap_load(ida->buffer_dmat, qcb->dmamap,
(void *)data, datasize, ida_setup_dmamap, hwqcb, 0);
op = qcb->flags & DMA_DATA_IN ?
BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE;
bus_dmamap_sync(ida->buffer_dmat, qcb->dmamap, op);
hwqcb->hdr.drive = drive; /* XXX */
hwqcb->req.bcount = howmany(datasize, DEV_BSIZE);
hwqcb->req.command = command;
qcb->flags = flags | IDA_COMMAND;
s = splbio();
STAILQ_INSERT_TAIL(&ida->qcb_queue, qcb, link.stqe);
ida_start(ida);
ida_wait(ida, qcb, 500);
splx(s);
/* XXX should have status returned here? */
/* XXX have "status pointer" area in QCB? */
return (0);
}
void
ida_submit_buf(struct ida_softc *ida, struct buf *bp)
{
bufq_insert_tail(&ida->buf_queue, bp);
ida_construct_qcb(ida);
ida_start(ida);
}
static void
ida_construct_qcb(struct ida_softc *ida)
{
struct ida_hardware_qcb *hwqcb;
struct ida_qcb *qcb;
bus_dmasync_op_t op;
struct buf *bp;
bp = bufq_first(&ida->buf_queue);
if (bp == NULL)
return; /* no more buffers */
qcb = ida_get_qcb(ida);
if (qcb == NULL)
return; /* out of resources */
bufq_remove(&ida->buf_queue, bp);
qcb->buf = bp;
qcb->flags = 0;
hwqcb = qcb->hwqcb;
bzero(hwqcb, sizeof(struct ida_hdr) + sizeof(struct ida_req));
bus_dmamap_load(ida->buffer_dmat, qcb->dmamap,
(void *)bp->b_data, bp->b_bcount, ida_setup_dmamap, hwqcb, 0);
op = qcb->flags & DMA_DATA_IN ?
BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE;
bus_dmamap_sync(ida->buffer_dmat, qcb->dmamap, op);
/*
* XXX
*/
{
struct id_softc *drv = (struct id_softc *)bp->b_driver1;
hwqcb->hdr.drive = drv->unit;
}
hwqcb->req.blkno = bp->b_pblkno;
hwqcb->req.bcount = howmany(bp->b_bcount, DEV_BSIZE);
hwqcb->req.command = bp->b_flags & B_READ ? CMD_READ : CMD_WRITE;
STAILQ_INSERT_TAIL(&ida->qcb_queue, qcb, link.stqe);
}
static __inline bus_addr_t
idahwqcbvtop(struct ida_softc *ida, struct ida_hardware_qcb *hwqcb)
{
return (ida->hwqcb_busaddr +
((bus_addr_t)hwqcb - (bus_addr_t)ida->hwqcbs));
}
static __inline struct ida_qcb *
idahwqcbptov(struct ida_softc *ida, bus_addr_t hwqcb_addr)
{
struct ida_hardware_qcb *hwqcb;
hwqcb = (struct ida_hardware_qcb *)
((bus_addr_t)ida->hwqcbs + (hwqcb_addr - ida->hwqcb_busaddr));
return (hwqcb->qcb);
}
/*
* This routine will be called from ida_intr in order to queue up more
* I/O, meaning that we may be in an interrupt context. Hence, we should
* not muck around with spl() in this routine.
*/
static void
ida_start(struct ida_softc *ida)
{
struct ida_qcb *qcb;
while ((qcb = STAILQ_FIRST(&ida->qcb_queue)) != NULL) {
if (ida_inl(ida, R_CMD_FIFO) == 0)
break; /* fifo is full */
STAILQ_REMOVE_HEAD(&ida->qcb_queue, link.stqe);
/*
* XXX
* place the qcb on an active list and set a timeout?
*/
qcb->state = QCB_ACTIVE;
/*
* XXX
* cache the physaddr so we don't keep doing this?
*/
ida_outl(ida, R_CMD_FIFO, idahwqcbvtop(ida, qcb->hwqcb));
}
}
static
void
ida_wait(struct ida_softc *ida, struct ida_qcb *qcb, int delay)
{
struct ida_qcb *qcb_done = NULL;
bus_addr_t completed;
if (ida->flags & IDA_ATTACHED) {
if (tsleep((caddr_t)qcb, PRIBIO, "idacmd", delay))
panic("ida_command: timeout waiting for interrupt");
return;
}
while ((completed = ida_inl(ida, R_DONE_FIFO)) == 0) {
if (delay-- == 0)
panic("ida_wait: timeout waiting for completion");
DELAY(10);
}
qcb_done = idahwqcbptov(ida, completed & ~3);
if (qcb_done != qcb)
panic("ida_wait: incorrect qcb returned");
ida_done(ida, qcb);
return;
}
void
ida_intr(void *data)
{
struct ida_softc *ida;
struct ida_qcb *qcb;
bus_addr_t completed;
ida = (struct ida_softc *)data;
if (ida_inl(ida, R_INT_PENDING) == 0)
return; /* not our interrupt */
while ((completed = ida_inl(ida, R_DONE_FIFO)) != 0) {
qcb = idahwqcbptov(ida, completed & ~3);
if (qcb == NULL || qcb->state != QCB_ACTIVE) {
device_printf(ida->dev,
"ignoring completion %x\n", completed);
continue;
}
ida_done(ida, qcb);
}
ida_start(ida);
}
/*
* should switch out command type; may be status, not just I/O.
*/
static void
ida_done(struct ida_softc *ida, struct ida_qcb *qcb)
{
int error = 0;
/*
* finish up command
*/
if (qcb->flags & DMA_DATA_TRANSFER) {
bus_dmasync_op_t op;
op = qcb->flags & DMA_DATA_IN ?
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE;
bus_dmamap_sync(ida->buffer_dmat, qcb->dmamap, op);
bus_dmamap_unload(ida->buffer_dmat, qcb->dmamap);
}
if (qcb->hwqcb->req.error & SOFT_ERROR)
device_printf(ida->dev, "soft error\n");
if (qcb->hwqcb->req.error & HARD_ERROR) {
error = 1;
device_printf(ida->dev, "hard error\n");
}
if (qcb->hwqcb->req.error & CMD_REJECTED) {
error = 1;
device_printf(ida->dev, "invalid request\n");
}
if (qcb->flags & IDA_COMMAND) {
if (ida->flags & IDA_ATTACHED)
wakeup(qcb);
} else {
if (error)
qcb->buf->b_flags |= B_ERROR;
id_intr(qcb->buf);
}
qcb->state = QCB_FREE;
SLIST_INSERT_HEAD(&ida->free_qcbs, qcb, link.sle);
ida_construct_qcb(ida);
}