ef27a04299
- Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
85 lines
3.8 KiB
C
85 lines
3.8 KiB
C
/*-
|
|
* Copyright (c) 1994,1995 Stefan Esser, Wolfgang StanglMeier
|
|
* Copyright (c) 2000 Michael Smith <msmith@freebsd.org>
|
|
* Copyright (c) 2000 BSDi
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef __PCIB_PRIVATE_H__
|
|
#define __PCIB_PRIVATE_H__
|
|
|
|
/*
|
|
* Export portions of generic PCI:PCI bridge support so that it can be
|
|
* used by subclasses.
|
|
*/
|
|
|
|
/*
|
|
* Bridge-specific data.
|
|
*/
|
|
struct pcib_softc
|
|
{
|
|
device_t dev;
|
|
uint32_t flags; /* flags */
|
|
#define PCIB_SUBTRACTIVE 0x1
|
|
#define PCIB_DISABLE_MSI 0x2
|
|
uint16_t command; /* command register */
|
|
uint8_t secbus; /* secondary bus number */
|
|
uint8_t subbus; /* subordinate bus number */
|
|
pci_addr_t pmembase; /* base address of prefetchable memory */
|
|
pci_addr_t pmemlimit; /* topmost address of prefetchable memory */
|
|
pci_addr_t membase; /* base address of memory window */
|
|
pci_addr_t memlimit; /* topmost address of memory window */
|
|
uint32_t iobase; /* base address of port window */
|
|
uint32_t iolimit; /* topmost address of port window */
|
|
uint16_t secstat; /* secondary bus status register */
|
|
uint16_t bridgectl; /* bridge control register */
|
|
uint8_t seclat; /* secondary bus latency timer */
|
|
};
|
|
|
|
typedef uint32_t pci_read_config_fn(int b, int s, int f, int reg, int width);
|
|
|
|
int host_pcib_get_busno(pci_read_config_fn read_config, int bus,
|
|
int slot, int func, uint8_t *busnum);
|
|
int pcib_attach(device_t dev);
|
|
void pcib_attach_common(device_t dev);
|
|
int pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result);
|
|
int pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value);
|
|
struct resource *pcib_alloc_resource(device_t dev, device_t child, int type, int *rid,
|
|
u_long start, u_long end, u_long count, u_int flags);
|
|
int pcib_maxslots(device_t dev);
|
|
uint32_t pcib_read_config(device_t dev, int b, int s, int f, int reg, int width);
|
|
void pcib_write_config(device_t dev, int b, int s, int f, int reg, uint32_t val, int width);
|
|
int pcib_route_interrupt(device_t pcib, device_t dev, int pin);
|
|
int pcib_alloc_msi(device_t pcib, device_t dev, int count, int maxcount, int *irqs);
|
|
int pcib_release_msi(device_t pcib, device_t dev, int count, int *irqs);
|
|
int pcib_alloc_msix(device_t pcib, device_t dev, int *irq);
|
|
int pcib_release_msix(device_t pcib, device_t dev, int irq);
|
|
int pcib_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr, uint32_t *data);
|
|
|
|
#endif
|