freebsd-skq/contrib/llvm/include
dim ec796a0f89 Pull in r360968 from upstream llvm trunk (by Philip Reames):
Clarify comments on helpers used by LFTR [NFC]

  I'm slowly wrapping my head around this code, and am making comment
  improvements where I can.

Pull in r360972 from upstream llvm trunk (by Philip Reames):

  [LFTR] Factor out a helper function for readability purpose [NFC]

Pull in r360976 from upstream llvm trunk (by Philip Reames):

  [IndVars] Don't reimplement Loop::isLoopInvariant [NFC]

  Using dominance vs a set membership check is indistinguishable from a
  compile time perspective, and the two queries return equivelent
  results.  Simplify code by using the existing function.

Pull in r360978 from upstream llvm trunk (by Philip Reames):

  [LFTR] Strengthen assertions in genLoopLimit [NFCI]

Pull in r362292 from upstream llvm trunk (by Nikita Popov):

  [IndVarSimplify] Fixup nowrap flags during LFTR (PR31181)

  Fix for https://bugs.llvm.org/show_bug.cgi?id=31181 and partial fix
  for LFTR poison handling issues in general.

  When LFTR moves a condition from pre-inc to post-inc, it may now
  depend on value that is poison due to nowrap flags. To avoid this, we
  clear any nowrap flag that SCEV cannot prove for the post-inc addrec.

  Additionally, LFTR may switch to a different IV that is dynamically
  dead and as such may be arbitrarily poison. This patch will correct
  nowrap flags in some but not all cases where this happens. This is
  related to the adoption of IR nowrap flags for the pre-inc addrec.
  (See some of the switch_to_different_iv tests, where flags are not
  dropped or insufficiently dropped.)

  Finally, there are likely similar issues with the handling of GEP
  inbounds, but we don't have a test case for this yet.

  Differential Revision: https://reviews.llvm.org/D60935

Pull in r362971 from upstream llvm trunk (by Philip Reames):

  Prepare for multi-exit LFTR [NFC]

  This change does the plumbing to wire an ExitingBB parameter through
  the LFTR implementation, and reorganizes the code to work in terms of
  a set of individual loop exits. Most of it is fairly obvious, but
  there's one key complexity which makes it worthy of consideration.
  The actual multi-exit LFTR patch is in D62625 for context.

  Specifically, it turns out the existing code uses the backedge taken
  count from before a IV is widened. Oddly, we can end up with a
  different (more expensive, but semantically equivelent) BE count for
  the loop when requerying after widening.  For the nestedIV example
  from elim-extend, we end up with the following BE counts:
  BEFORE: (-2 + (-1 * %innercount) + %limit)
  AFTER: (-1 + (sext i32 (-1 + %limit) to i64) + (-1 * (sext i32 %innercount to i64))<nsw>)

  This is the only test in tree which seems sensitive to this
  difference. The actual result of using the wider BETC on this example
  is that we actually produce slightly better code. :)

  In review, we decided to accept that test change.  This patch is
  structured to preserve the old behavior, but a separate change will
  immediate follow with the behavior change.  (I wanted it separate for
  problem attribution purposes.)

  Differential Revision: https://reviews.llvm.org/D62880

Pull in r362975 from upstream llvm trunk (by Philip Reames):

  [LFTR] Use recomputed BE count

  This was discussed as part of D62880.  The basic thought is that
  computing BE taken count after widening should produce (on average)
  an equally good backedge taken count as the one before widening.
  Since there's only one test in the suite which is impacted by this
  change, and it's essentially equivelent codegen, that seems to be a
  reasonable assertion.  This change was separated from r362971 so that
  if this turns out to be problematic, the triggering piece is obvious
  and easily revertable.

  For the nestedIV example from elim-extend.ll, we end up with the
  following BE counts:
  BEFORE: (-2 + (-1 * %innercount) + %limit)
  AFTER: (-1 + (sext i32 (-1 + %limit) to i64) + (-1 * (sext i32 %innercount to i64))<nsw>)

  Note that before is an i32 type, and the after is an i64.  Truncating
  the i64 produces the i32.

Pull in r362980 from upstream llvm trunk (by Philip Reames):

  Factor out a helper function for readability and reuse in a future
  patch [NFC]

Pull in r363613 from upstream llvm trunk (by Philip Reames):

  Fix a bug w/inbounds invalidation in LFTR (recommit)

  Recommit r363289 with a bug fix for crash identified in pr42279.
  Issue was that a loop exit test does not have to be an icmp, leading
  to a null dereference crash when new logic was exercised for that
  case.  Test case previously committed in r363601.

  Original commit comment follows:

  This contains fixes for two cases where we might invalidate inbounds
  and leave it stale in the IR (a miscompile). Case 1 is when switching
  to an IV with no dynamically live uses, and case 2 is when doing
  pre-to-post conversion on the same pointer type IV.

  The basic scheme used is to prove that using the given IV (pre or
  post increment forms) would have to already trigger UB on the path to
  the test we're modifying. As such, our potential UB triggering use
  does not change the semantics of the original program.

  As was pointed out in the review thread by Nikita, this is defending
  against a separate issue from the hasConcreteDef case. This is about
  poison, that's about undef. Unfortunately, the two are different, see
  Nikita's comment for a fuller explanation, he explains it well.

  (Note: I'm going to address Nikita's last style comment in a separate
  commit just to minimize chance of subtle bugs being introduced due to
  typos.)

  Differential Revision: https://reviews.llvm.org/D62939

Pull in r363875 from upstream llvm trunk (by Philip Reames):

  [LFTR] Rename variable to minimize confusion [NFC]

  (Recommit of r363293 which was reverted when a dependent patch was.)

  As pointed out by Nikita in D62625, BackedgeTakenCount is generally
  used to refer to the backedge taken count of the loop. A conditional
  backedge taken count - one which only applies if a particular exit is
  taken - is called a ExitCount in SCEV code, so be consistent here.

Pull in r363877 from upstream llvm trunk (by Philip Reames):

  [LFTR] Stylistic cleanup as suggested in last review comment of
  D62939 [NFC]

  (Resumbit of r363292 which was reverted along w/an earlier patch)

Pull in r364346 from upstream llvm trunk (by Philip Reames):

  [LFTR] Adjust debug output to include extensions (if any)

Pull in r364693 from upstream llvm trunk (by Philip Reames):

  [IndVars] Remove a bit of manual constant folding [NFC]

  SCEV is more than capable of folding (add x, trunc(0)) to x.

Pull in r364709 from upstream llvm trunk (by Nikita Popov):

  [LFTR] Fix post-inc pointer IV with truncated exit count (PR41998)

  Fixes https://bugs.llvm.org/show_bug.cgi?id=41998. Usually when we
  have a truncated exit count we'll truncate the IV when comparing
  against the limit, in which case exit count overflow in post-inc form
  doesn't matter. However, for pointer IVs we don't do that, so we have
  to be careful about incrementing the IV in the wide type.

  I'm fixing this by removing the IVCount variable (which was ExitCount
  or ExitCount+1) and replacing it with a UsePostInc flag, and then
  moving the actual limit adjustment to the individual cases (which
  are: pointer IV where we add to the wide type, integer IV where we
  add to the narrow type, and constant integer IV where we add to the
  wide type).

  Differential Revision: https://reviews.llvm.org/D63686

Together, these should fix a hang when building the textproc/htmldoc
port, due to an incorrect loop optimization.

PR:		237515
MFC after:	1 week
2019-07-01 21:06:10 +00:00
..
llvm Pull in r360968 from upstream llvm trunk (by Philip Reames): 2019-07-01 21:06:10 +00:00
llvm-c Merge llvm trunk r351319, resolve conflicts, and update FREEBSD-Xlist. 2019-01-20 11:41:25 +00:00