98ad45c3d3
o add net80211 support for a tdma vap that is built on top of the existing adhoc-demo support o add tdma scheduling of frame transmission to the ath driver; it's conceivable other devices might be capable of this too in which case they can make use of the 802.11 protocol additions etc. o add minor bits to user tools that need to know: ifconfig to setup and configure, new statistics in athstats, and new debug mask bits While the architecture can support >2 slots in a TDMA BSS the current design is intended (and tested) for only 2 slots. Sponsored by: Intel
936 lines
26 KiB
C
936 lines
26 KiB
C
/*-
|
|
* Copyright (c) 2001 Atsushi Onoe
|
|
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_wlan.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_llc.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_input.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#ifdef INET
|
|
#include <netinet/in.h>
|
|
#include <net/ethernet.h>
|
|
#endif
|
|
|
|
int
|
|
ieee80211_input_all(struct ieee80211com *ic,
|
|
struct mbuf *m, int rssi, int noise, u_int32_t rstamp)
|
|
{
|
|
struct ieee80211vap *vap;
|
|
int type = -1;
|
|
|
|
/* XXX locking */
|
|
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
|
|
struct ieee80211_node *ni;
|
|
struct mbuf *mcopy;
|
|
|
|
/*
|
|
* WDS vap's only receive directed traffic from the
|
|
* station at the ``far end''. That traffic should
|
|
* be passed through the AP vap the station is associated
|
|
* to--so don't spam them with mcast frames.
|
|
*/
|
|
if (vap->iv_opmode == IEEE80211_M_WDS)
|
|
continue;
|
|
if (TAILQ_NEXT(vap, iv_next) != NULL) {
|
|
/*
|
|
* Packet contents are changed by ieee80211_decap
|
|
* so do a deep copy of the packet.
|
|
*/
|
|
mcopy = m_dup(m, M_DONTWAIT);
|
|
if (mcopy == NULL) {
|
|
/* XXX stat+msg */
|
|
continue;
|
|
}
|
|
} else {
|
|
mcopy = m;
|
|
m = NULL;
|
|
}
|
|
ni = ieee80211_ref_node(vap->iv_bss);
|
|
type = ieee80211_input(ni, mcopy, rssi, noise, rstamp);
|
|
ieee80211_free_node(ni);
|
|
}
|
|
if (m != NULL) /* no vaps, reclaim mbuf */
|
|
m_freem(m);
|
|
return type;
|
|
}
|
|
|
|
/*
|
|
* This function reassemble fragments.
|
|
*
|
|
* XXX should handle 3 concurrent reassemblies per-spec.
|
|
*/
|
|
struct mbuf *
|
|
ieee80211_defrag(struct ieee80211_node *ni, struct mbuf *m, int hdrspace)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *);
|
|
struct ieee80211_frame *lwh;
|
|
uint16_t rxseq;
|
|
uint8_t fragno;
|
|
uint8_t more_frag = wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG;
|
|
struct mbuf *mfrag;
|
|
|
|
KASSERT(!IEEE80211_IS_MULTICAST(wh->i_addr1), ("multicast fragm?"));
|
|
|
|
rxseq = le16toh(*(uint16_t *)wh->i_seq);
|
|
fragno = rxseq & IEEE80211_SEQ_FRAG_MASK;
|
|
|
|
/* Quick way out, if there's nothing to defragment */
|
|
if (!more_frag && fragno == 0 && ni->ni_rxfrag[0] == NULL)
|
|
return m;
|
|
|
|
/*
|
|
* Remove frag to insure it doesn't get reaped by timer.
|
|
*/
|
|
if (ni->ni_table == NULL) {
|
|
/*
|
|
* Should never happen. If the node is orphaned (not in
|
|
* the table) then input packets should not reach here.
|
|
* Otherwise, a concurrent request that yanks the table
|
|
* should be blocked by other interlocking and/or by first
|
|
* shutting the driver down. Regardless, be defensive
|
|
* here and just bail
|
|
*/
|
|
/* XXX need msg+stat */
|
|
m_freem(m);
|
|
return NULL;
|
|
}
|
|
IEEE80211_NODE_LOCK(ni->ni_table);
|
|
mfrag = ni->ni_rxfrag[0];
|
|
ni->ni_rxfrag[0] = NULL;
|
|
IEEE80211_NODE_UNLOCK(ni->ni_table);
|
|
|
|
/*
|
|
* Validate new fragment is in order and
|
|
* related to the previous ones.
|
|
*/
|
|
if (mfrag != NULL) {
|
|
uint16_t last_rxseq;
|
|
|
|
lwh = mtod(mfrag, struct ieee80211_frame *);
|
|
last_rxseq = le16toh(*(uint16_t *)lwh->i_seq);
|
|
/* NB: check seq # and frag together */
|
|
if (rxseq != last_rxseq+1 ||
|
|
!IEEE80211_ADDR_EQ(wh->i_addr1, lwh->i_addr1) ||
|
|
!IEEE80211_ADDR_EQ(wh->i_addr2, lwh->i_addr2)) {
|
|
/*
|
|
* Unrelated fragment or no space for it,
|
|
* clear current fragments.
|
|
*/
|
|
m_freem(mfrag);
|
|
mfrag = NULL;
|
|
}
|
|
}
|
|
|
|
if (mfrag == NULL) {
|
|
if (fragno != 0) { /* !first fragment, discard */
|
|
vap->iv_stats.is_rx_defrag++;
|
|
IEEE80211_NODE_STAT(ni, rx_defrag);
|
|
m_freem(m);
|
|
return NULL;
|
|
}
|
|
mfrag = m;
|
|
} else { /* concatenate */
|
|
m_adj(m, hdrspace); /* strip header */
|
|
m_cat(mfrag, m);
|
|
/* NB: m_cat doesn't update the packet header */
|
|
mfrag->m_pkthdr.len += m->m_pkthdr.len;
|
|
/* track last seqnum and fragno */
|
|
lwh = mtod(mfrag, struct ieee80211_frame *);
|
|
*(uint16_t *) lwh->i_seq = *(uint16_t *) wh->i_seq;
|
|
}
|
|
if (more_frag) { /* more to come, save */
|
|
ni->ni_rxfragstamp = ticks;
|
|
ni->ni_rxfrag[0] = mfrag;
|
|
mfrag = NULL;
|
|
}
|
|
return mfrag;
|
|
}
|
|
|
|
void
|
|
ieee80211_deliver_data(struct ieee80211vap *vap,
|
|
struct ieee80211_node *ni, struct mbuf *m)
|
|
{
|
|
struct ether_header *eh = mtod(m, struct ether_header *);
|
|
struct ifnet *ifp = vap->iv_ifp;
|
|
|
|
/* NB: see hostap_deliver_data, this path doesn't handle hostap */
|
|
KASSERT(vap->iv_opmode != IEEE80211_M_HOSTAP, ("gack, hostap"));
|
|
/*
|
|
* Do accounting.
|
|
*/
|
|
ifp->if_ipackets++;
|
|
IEEE80211_NODE_STAT(ni, rx_data);
|
|
IEEE80211_NODE_STAT_ADD(ni, rx_bytes, m->m_pkthdr.len);
|
|
if (ETHER_IS_MULTICAST(eh->ether_dhost)) {
|
|
m->m_flags |= M_MCAST; /* XXX M_BCAST? */
|
|
IEEE80211_NODE_STAT(ni, rx_mcast);
|
|
} else
|
|
IEEE80211_NODE_STAT(ni, rx_ucast);
|
|
m->m_pkthdr.rcvif = ifp;
|
|
|
|
/* clear driver/net80211 flags before passing up */
|
|
m->m_flags &= ~M_80211_RX;
|
|
|
|
if (ni->ni_vlan != 0) {
|
|
/* attach vlan tag */
|
|
m->m_pkthdr.ether_vtag = ni->ni_vlan;
|
|
m->m_flags |= M_VLANTAG;
|
|
}
|
|
ifp->if_input(ifp, m);
|
|
}
|
|
|
|
struct mbuf *
|
|
ieee80211_decap(struct ieee80211vap *vap, struct mbuf *m, int hdrlen)
|
|
{
|
|
struct ieee80211_qosframe_addr4 wh; /* Max size address frames */
|
|
struct ether_header *eh;
|
|
struct llc *llc;
|
|
|
|
if (m->m_len < hdrlen + sizeof(*llc) &&
|
|
(m = m_pullup(m, hdrlen + sizeof(*llc))) == NULL) {
|
|
/* XXX stat, msg */
|
|
return NULL;
|
|
}
|
|
memcpy(&wh, mtod(m, caddr_t), hdrlen);
|
|
llc = (struct llc *)(mtod(m, caddr_t) + hdrlen);
|
|
if (llc->llc_dsap == LLC_SNAP_LSAP && llc->llc_ssap == LLC_SNAP_LSAP &&
|
|
llc->llc_control == LLC_UI && llc->llc_snap.org_code[0] == 0 &&
|
|
llc->llc_snap.org_code[1] == 0 && llc->llc_snap.org_code[2] == 0 &&
|
|
/* NB: preserve AppleTalk frames that have a native SNAP hdr */
|
|
!(llc->llc_snap.ether_type == htons(ETHERTYPE_AARP) ||
|
|
llc->llc_snap.ether_type == htons(ETHERTYPE_IPX))) {
|
|
m_adj(m, hdrlen + sizeof(struct llc) - sizeof(*eh));
|
|
llc = NULL;
|
|
} else {
|
|
m_adj(m, hdrlen - sizeof(*eh));
|
|
}
|
|
eh = mtod(m, struct ether_header *);
|
|
switch (wh.i_fc[1] & IEEE80211_FC1_DIR_MASK) {
|
|
case IEEE80211_FC1_DIR_NODS:
|
|
IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr1);
|
|
IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr2);
|
|
break;
|
|
case IEEE80211_FC1_DIR_TODS:
|
|
IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr3);
|
|
IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr2);
|
|
break;
|
|
case IEEE80211_FC1_DIR_FROMDS:
|
|
IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr1);
|
|
IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr3);
|
|
break;
|
|
case IEEE80211_FC1_DIR_DSTODS:
|
|
IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr3);
|
|
IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr4);
|
|
break;
|
|
}
|
|
#ifdef ALIGNED_POINTER
|
|
if (!ALIGNED_POINTER(mtod(m, caddr_t) + sizeof(*eh), uint32_t)) {
|
|
struct mbuf *n, *n0, **np;
|
|
caddr_t newdata;
|
|
int off, pktlen;
|
|
|
|
n0 = NULL;
|
|
np = &n0;
|
|
off = 0;
|
|
pktlen = m->m_pkthdr.len;
|
|
while (pktlen > off) {
|
|
if (n0 == NULL) {
|
|
MGETHDR(n, M_DONTWAIT, MT_DATA);
|
|
if (n == NULL) {
|
|
m_freem(m);
|
|
return NULL;
|
|
}
|
|
M_MOVE_PKTHDR(n, m);
|
|
n->m_len = MHLEN;
|
|
} else {
|
|
MGET(n, M_DONTWAIT, MT_DATA);
|
|
if (n == NULL) {
|
|
m_freem(m);
|
|
m_freem(n0);
|
|
return NULL;
|
|
}
|
|
n->m_len = MLEN;
|
|
}
|
|
if (pktlen - off >= MINCLSIZE) {
|
|
MCLGET(n, M_DONTWAIT);
|
|
if (n->m_flags & M_EXT)
|
|
n->m_len = n->m_ext.ext_size;
|
|
}
|
|
if (n0 == NULL) {
|
|
newdata =
|
|
(caddr_t)ALIGN(n->m_data + sizeof(*eh)) -
|
|
sizeof(*eh);
|
|
n->m_len -= newdata - n->m_data;
|
|
n->m_data = newdata;
|
|
}
|
|
if (n->m_len > pktlen - off)
|
|
n->m_len = pktlen - off;
|
|
m_copydata(m, off, n->m_len, mtod(n, caddr_t));
|
|
off += n->m_len;
|
|
*np = n;
|
|
np = &n->m_next;
|
|
}
|
|
m_freem(m);
|
|
m = n0;
|
|
}
|
|
#endif /* ALIGNED_POINTER */
|
|
if (llc != NULL) {
|
|
eh = mtod(m, struct ether_header *);
|
|
eh->ether_type = htons(m->m_pkthdr.len - sizeof(*eh));
|
|
}
|
|
return m;
|
|
}
|
|
|
|
/*
|
|
* Decap a frame encapsulated in a fast-frame/A-MSDU.
|
|
*/
|
|
struct mbuf *
|
|
ieee80211_decap1(struct mbuf *m, int *framelen)
|
|
{
|
|
#define FF_LLC_SIZE (sizeof(struct ether_header) + sizeof(struct llc))
|
|
struct ether_header *eh;
|
|
struct llc *llc;
|
|
|
|
/*
|
|
* The frame has an 802.3 header followed by an 802.2
|
|
* LLC header. The encapsulated frame length is in the
|
|
* first header type field; save that and overwrite it
|
|
* with the true type field found in the second. Then
|
|
* copy the 802.3 header up to where it belongs and
|
|
* adjust the mbuf contents to remove the void.
|
|
*/
|
|
if (m->m_len < FF_LLC_SIZE && (m = m_pullup(m, FF_LLC_SIZE)) == NULL)
|
|
return NULL;
|
|
eh = mtod(m, struct ether_header *); /* 802.3 header is first */
|
|
llc = (struct llc *)&eh[1]; /* 802.2 header follows */
|
|
*framelen = ntohs(eh->ether_type) /* encap'd frame size */
|
|
+ sizeof(struct ether_header) - sizeof(struct llc);
|
|
eh->ether_type = llc->llc_un.type_snap.ether_type;
|
|
ovbcopy(eh, mtod(m, uint8_t *) + sizeof(struct llc),
|
|
sizeof(struct ether_header));
|
|
m_adj(m, sizeof(struct llc));
|
|
return m;
|
|
#undef FF_LLC_SIZE
|
|
}
|
|
|
|
/*
|
|
* Decap the encapsulated frame pair and dispatch the first
|
|
* for delivery. The second frame is returned for delivery
|
|
* via the normal path.
|
|
*/
|
|
struct mbuf *
|
|
ieee80211_decap_fastframe(struct ieee80211_node *ni, struct mbuf *m)
|
|
{
|
|
#define MS(x,f) (((x) & f) >> f##_S)
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
uint32_t ath;
|
|
struct mbuf *n;
|
|
int framelen;
|
|
|
|
m_copydata(m, 0, sizeof(uint32_t), (caddr_t) &ath);
|
|
if (MS(ath, ATH_FF_PROTO) != ATH_FF_PROTO_L2TUNNEL) {
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
ni->ni_macaddr, "fast-frame",
|
|
"unsupport tunnel protocol, header 0x%x", ath);
|
|
vap->iv_stats.is_ff_badhdr++;
|
|
m_freem(m);
|
|
return NULL;
|
|
}
|
|
/* NB: skip header and alignment padding */
|
|
m_adj(m, roundup(sizeof(uint32_t) - 2, 4) + 2);
|
|
|
|
vap->iv_stats.is_ff_decap++;
|
|
|
|
/*
|
|
* Decap the first frame, bust it apart from the
|
|
* second and deliver; then decap the second frame
|
|
* and return it to the caller for normal delivery.
|
|
*/
|
|
m = ieee80211_decap1(m, &framelen);
|
|
if (m == NULL) {
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
ni->ni_macaddr, "fast-frame", "%s", "first decap failed");
|
|
vap->iv_stats.is_ff_tooshort++;
|
|
return NULL;
|
|
}
|
|
n = m_split(m, framelen, M_NOWAIT);
|
|
if (n == NULL) {
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
ni->ni_macaddr, "fast-frame",
|
|
"%s", "unable to split encapsulated frames");
|
|
vap->iv_stats.is_ff_split++;
|
|
m_freem(m); /* NB: must reclaim */
|
|
return NULL;
|
|
}
|
|
/* XXX not right for WDS */
|
|
vap->iv_deliver_data(vap, ni, m); /* 1st of pair */
|
|
|
|
/*
|
|
* Decap second frame.
|
|
*/
|
|
m_adj(n, roundup2(framelen, 4) - framelen); /* padding */
|
|
n = ieee80211_decap1(n, &framelen);
|
|
if (n == NULL) {
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
ni->ni_macaddr, "fast-frame", "%s", "second decap failed");
|
|
vap->iv_stats.is_ff_tooshort++;
|
|
}
|
|
/* XXX verify framelen against mbuf contents */
|
|
return n; /* 2nd delivered by caller */
|
|
#undef MS
|
|
}
|
|
|
|
/*
|
|
* Install received rate set information in the node's state block.
|
|
*/
|
|
int
|
|
ieee80211_setup_rates(struct ieee80211_node *ni,
|
|
const uint8_t *rates, const uint8_t *xrates, int flags)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct ieee80211_rateset *rs = &ni->ni_rates;
|
|
|
|
memset(rs, 0, sizeof(*rs));
|
|
rs->rs_nrates = rates[1];
|
|
memcpy(rs->rs_rates, rates + 2, rs->rs_nrates);
|
|
if (xrates != NULL) {
|
|
uint8_t nxrates;
|
|
/*
|
|
* Tack on 11g extended supported rate element.
|
|
*/
|
|
nxrates = xrates[1];
|
|
if (rs->rs_nrates + nxrates > IEEE80211_RATE_MAXSIZE) {
|
|
nxrates = IEEE80211_RATE_MAXSIZE - rs->rs_nrates;
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_XRATE, ni,
|
|
"extended rate set too large; only using "
|
|
"%u of %u rates", nxrates, xrates[1]);
|
|
vap->iv_stats.is_rx_rstoobig++;
|
|
}
|
|
memcpy(rs->rs_rates + rs->rs_nrates, xrates+2, nxrates);
|
|
rs->rs_nrates += nxrates;
|
|
}
|
|
return ieee80211_fix_rate(ni, rs, flags);
|
|
}
|
|
|
|
/*
|
|
* Send a management frame error response to the specified
|
|
* station. If ni is associated with the station then use
|
|
* it; otherwise allocate a temporary node suitable for
|
|
* transmitting the frame and then free the reference so
|
|
* it will go away as soon as the frame has been transmitted.
|
|
*/
|
|
void
|
|
ieee80211_send_error(struct ieee80211_node *ni,
|
|
const uint8_t mac[IEEE80211_ADDR_LEN], int subtype, int arg)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
int istmp;
|
|
|
|
if (ni == vap->iv_bss) {
|
|
if (vap->iv_state != IEEE80211_S_RUN) {
|
|
/*
|
|
* XXX hack until we get rid of this routine.
|
|
* We can be called prior to the vap reaching
|
|
* run state under certain conditions in which
|
|
* case iv_bss->ni_chan will not be setup.
|
|
* Check for this explicitly and and just ignore
|
|
* the request.
|
|
*/
|
|
return;
|
|
}
|
|
ni = ieee80211_tmp_node(vap, mac);
|
|
if (ni == NULL) {
|
|
/* XXX msg */
|
|
return;
|
|
}
|
|
istmp = 1;
|
|
} else
|
|
istmp = 0;
|
|
IEEE80211_SEND_MGMT(ni, subtype, arg);
|
|
if (istmp)
|
|
ieee80211_free_node(ni);
|
|
}
|
|
|
|
int
|
|
ieee80211_alloc_challenge(struct ieee80211_node *ni)
|
|
{
|
|
if (ni->ni_challenge == NULL)
|
|
ni->ni_challenge = (uint32_t *) malloc(IEEE80211_CHALLENGE_LEN,
|
|
M_80211_NODE, M_NOWAIT);
|
|
if (ni->ni_challenge == NULL) {
|
|
IEEE80211_NOTE(ni->ni_vap,
|
|
IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, ni,
|
|
"%s", "shared key challenge alloc failed");
|
|
/* XXX statistic */
|
|
}
|
|
return (ni->ni_challenge != NULL);
|
|
}
|
|
|
|
void
|
|
ieee80211_parse_ath(struct ieee80211_node *ni, uint8_t *ie)
|
|
{
|
|
const struct ieee80211_ath_ie *ath =
|
|
(const struct ieee80211_ath_ie *) ie;
|
|
|
|
ni->ni_ath_flags = ath->ath_capability;
|
|
ni->ni_ath_defkeyix = LE_READ_2(&ath->ath_defkeyix);
|
|
}
|
|
|
|
/*
|
|
* Parse a Beacon or ProbeResponse frame and return the
|
|
* useful information in an ieee80211_scanparams structure.
|
|
* Status is set to 0 if no problems were found; otherwise
|
|
* a bitmask of IEEE80211_BPARSE_* items is returned that
|
|
* describes the problems detected.
|
|
*/
|
|
int
|
|
ieee80211_parse_beacon(struct ieee80211_node *ni, struct mbuf *m,
|
|
struct ieee80211_scanparams *scan)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct ieee80211_frame *wh;
|
|
uint8_t *frm, *efrm;
|
|
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
frm = (uint8_t *)&wh[1];
|
|
efrm = mtod(m, uint8_t *) + m->m_len;
|
|
scan->status = 0;
|
|
/*
|
|
* beacon/probe response frame format
|
|
* [8] time stamp
|
|
* [2] beacon interval
|
|
* [2] capability information
|
|
* [tlv] ssid
|
|
* [tlv] supported rates
|
|
* [tlv] country information
|
|
* [tlv] parameter set (FH/DS)
|
|
* [tlv] erp information
|
|
* [tlv] extended supported rates
|
|
* [tlv] WME
|
|
* [tlv] WPA or RSN
|
|
* [tlv] HT capabilities
|
|
* [tlv] HT information
|
|
* [tlv] Atheros capabilities
|
|
*/
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm, 12,
|
|
return (scan->status = IEEE80211_BPARSE_BADIELEN));
|
|
memset(scan, 0, sizeof(*scan));
|
|
scan->tstamp = frm; frm += 8;
|
|
scan->bintval = le16toh(*(uint16_t *)frm); frm += 2;
|
|
scan->capinfo = le16toh(*(uint16_t *)frm); frm += 2;
|
|
scan->bchan = ieee80211_chan2ieee(ic, ic->ic_curchan);
|
|
scan->chan = scan->bchan;
|
|
scan->ies = frm;
|
|
scan->ies_len = efrm - frm;
|
|
|
|
while (efrm - frm > 1) {
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2,
|
|
return (scan->status = IEEE80211_BPARSE_BADIELEN));
|
|
switch (*frm) {
|
|
case IEEE80211_ELEMID_SSID:
|
|
scan->ssid = frm;
|
|
break;
|
|
case IEEE80211_ELEMID_RATES:
|
|
scan->rates = frm;
|
|
break;
|
|
case IEEE80211_ELEMID_COUNTRY:
|
|
scan->country = frm;
|
|
break;
|
|
case IEEE80211_ELEMID_FHPARMS:
|
|
if (ic->ic_phytype == IEEE80211_T_FH) {
|
|
scan->fhdwell = LE_READ_2(&frm[2]);
|
|
scan->chan = IEEE80211_FH_CHAN(frm[4], frm[5]);
|
|
scan->fhindex = frm[6];
|
|
}
|
|
break;
|
|
case IEEE80211_ELEMID_DSPARMS:
|
|
/*
|
|
* XXX hack this since depending on phytype
|
|
* is problematic for multi-mode devices.
|
|
*/
|
|
if (ic->ic_phytype != IEEE80211_T_FH)
|
|
scan->chan = frm[2];
|
|
break;
|
|
case IEEE80211_ELEMID_TIM:
|
|
/* XXX ATIM? */
|
|
scan->tim = frm;
|
|
scan->timoff = frm - mtod(m, uint8_t *);
|
|
break;
|
|
case IEEE80211_ELEMID_IBSSPARMS:
|
|
case IEEE80211_ELEMID_CFPARMS:
|
|
case IEEE80211_ELEMID_PWRCNSTR:
|
|
/* NB: avoid debugging complaints */
|
|
break;
|
|
case IEEE80211_ELEMID_XRATES:
|
|
scan->xrates = frm;
|
|
break;
|
|
case IEEE80211_ELEMID_ERP:
|
|
if (frm[1] != 1) {
|
|
IEEE80211_DISCARD_IE(vap,
|
|
IEEE80211_MSG_ELEMID, wh, "ERP",
|
|
"bad len %u", frm[1]);
|
|
vap->iv_stats.is_rx_elem_toobig++;
|
|
break;
|
|
}
|
|
scan->erp = frm[2] | 0x100;
|
|
break;
|
|
case IEEE80211_ELEMID_HTCAP:
|
|
scan->htcap = frm;
|
|
break;
|
|
case IEEE80211_ELEMID_RSN:
|
|
scan->rsn = frm;
|
|
break;
|
|
case IEEE80211_ELEMID_HTINFO:
|
|
scan->htinfo = frm;
|
|
break;
|
|
case IEEE80211_ELEMID_VENDOR:
|
|
if (iswpaoui(frm))
|
|
scan->wpa = frm;
|
|
else if (iswmeparam(frm) || iswmeinfo(frm))
|
|
scan->wme = frm;
|
|
else if (isatherosoui(frm))
|
|
scan->ath = frm;
|
|
#ifdef IEEE80211_SUPPORT_TDMA
|
|
else if (istdmaoui(frm))
|
|
scan->tdma = frm;
|
|
#endif
|
|
else if (vap->iv_flags_ext & IEEE80211_FEXT_HTCOMPAT) {
|
|
/*
|
|
* Accept pre-draft HT ie's if the
|
|
* standard ones have not been seen.
|
|
*/
|
|
if (ishtcapoui(frm)) {
|
|
if (scan->htcap == NULL)
|
|
scan->htcap = frm;
|
|
} else if (ishtinfooui(frm)) {
|
|
if (scan->htinfo == NULL)
|
|
scan->htcap = frm;
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID,
|
|
wh, "unhandled",
|
|
"id %u, len %u", *frm, frm[1]);
|
|
vap->iv_stats.is_rx_elem_unknown++;
|
|
break;
|
|
}
|
|
frm += frm[1] + 2;
|
|
}
|
|
IEEE80211_VERIFY_ELEMENT(scan->rates, IEEE80211_RATE_MAXSIZE,
|
|
scan->status |= IEEE80211_BPARSE_RATES_INVALID);
|
|
if (scan->rates != NULL && scan->xrates != NULL) {
|
|
/*
|
|
* NB: don't process XRATES if RATES is missing. This
|
|
* avoids a potential null ptr deref and should be ok
|
|
* as the return code will already note RATES is missing
|
|
* (so callers shouldn't otherwise process the frame).
|
|
*/
|
|
IEEE80211_VERIFY_ELEMENT(scan->xrates,
|
|
IEEE80211_RATE_MAXSIZE - scan->rates[1],
|
|
scan->status |= IEEE80211_BPARSE_XRATES_INVALID);
|
|
}
|
|
IEEE80211_VERIFY_ELEMENT(scan->ssid, IEEE80211_NWID_LEN,
|
|
scan->status |= IEEE80211_BPARSE_SSID_INVALID);
|
|
if (scan->chan != scan->bchan && ic->ic_phytype != IEEE80211_T_FH) {
|
|
/*
|
|
* Frame was received on a channel different from the
|
|
* one indicated in the DS params element id;
|
|
* silently discard it.
|
|
*
|
|
* NB: this can happen due to signal leakage.
|
|
* But we should take it for FH phy because
|
|
* the rssi value should be correct even for
|
|
* different hop pattern in FH.
|
|
*/
|
|
IEEE80211_DISCARD(vap,
|
|
IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT,
|
|
wh, NULL, "for off-channel %u", scan->chan);
|
|
vap->iv_stats.is_rx_chanmismatch++;
|
|
scan->status |= IEEE80211_BPARSE_OFFCHAN;
|
|
}
|
|
if (!(IEEE80211_BINTVAL_MIN <= scan->bintval &&
|
|
scan->bintval <= IEEE80211_BINTVAL_MAX)) {
|
|
IEEE80211_DISCARD(vap,
|
|
IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT,
|
|
wh, NULL, "bogus beacon interval", scan->bintval);
|
|
vap->iv_stats.is_rx_badbintval++;
|
|
scan->status |= IEEE80211_BPARSE_BINTVAL_INVALID;
|
|
}
|
|
if (scan->country != NULL) {
|
|
/*
|
|
* Validate we have at least enough data to extract
|
|
* the country code. Not sure if we should return an
|
|
* error instead of discarding the IE; consider this
|
|
* being lenient as we don't depend on the data for
|
|
* correct operation.
|
|
*/
|
|
IEEE80211_VERIFY_LENGTH(scan->country[1], 3 * sizeof(uint8_t),
|
|
scan->country = NULL);
|
|
}
|
|
/*
|
|
* Process HT ie's. This is complicated by our
|
|
* accepting both the standard ie's and the pre-draft
|
|
* vendor OUI ie's that some vendors still use/require.
|
|
*/
|
|
if (scan->htcap != NULL) {
|
|
IEEE80211_VERIFY_LENGTH(scan->htcap[1],
|
|
scan->htcap[0] == IEEE80211_ELEMID_VENDOR ?
|
|
4 + sizeof(struct ieee80211_ie_htcap)-2 :
|
|
sizeof(struct ieee80211_ie_htcap)-2,
|
|
scan->htcap = NULL);
|
|
}
|
|
if (scan->htinfo != NULL) {
|
|
IEEE80211_VERIFY_LENGTH(scan->htinfo[1],
|
|
scan->htinfo[0] == IEEE80211_ELEMID_VENDOR ?
|
|
4 + sizeof(struct ieee80211_ie_htinfo)-2 :
|
|
sizeof(struct ieee80211_ie_htinfo)-2,
|
|
scan->htinfo = NULL);
|
|
}
|
|
return scan->status;
|
|
}
|
|
|
|
/*
|
|
* Parse an Action frame. Return 0 on success, non-zero on failure.
|
|
*/
|
|
int
|
|
ieee80211_parse_action(struct ieee80211_node *ni, struct mbuf *m)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
const struct ieee80211_action *ia;
|
|
struct ieee80211_frame *wh;
|
|
uint8_t *frm, *efrm;
|
|
|
|
/*
|
|
* action frame format:
|
|
* [1] category
|
|
* [1] action
|
|
* [tlv] parameters
|
|
*/
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
frm = (u_int8_t *)&wh[1];
|
|
efrm = mtod(m, u_int8_t *) + m->m_len;
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm,
|
|
sizeof(struct ieee80211_action), return EINVAL);
|
|
ia = (const struct ieee80211_action *) frm;
|
|
|
|
vap->iv_stats.is_rx_action++;
|
|
IEEE80211_NODE_STAT(ni, rx_action);
|
|
|
|
/* verify frame payloads but defer processing */
|
|
/* XXX maybe push this to method */
|
|
switch (ia->ia_category) {
|
|
case IEEE80211_ACTION_CAT_BA:
|
|
switch (ia->ia_action) {
|
|
case IEEE80211_ACTION_BA_ADDBA_REQUEST:
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm,
|
|
sizeof(struct ieee80211_action_ba_addbarequest),
|
|
return EINVAL);
|
|
break;
|
|
case IEEE80211_ACTION_BA_ADDBA_RESPONSE:
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm,
|
|
sizeof(struct ieee80211_action_ba_addbaresponse),
|
|
return EINVAL);
|
|
break;
|
|
case IEEE80211_ACTION_BA_DELBA:
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm,
|
|
sizeof(struct ieee80211_action_ba_delba),
|
|
return EINVAL);
|
|
break;
|
|
}
|
|
break;
|
|
case IEEE80211_ACTION_CAT_HT:
|
|
switch (ia->ia_action) {
|
|
case IEEE80211_ACTION_HT_TXCHWIDTH:
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm,
|
|
sizeof(struct ieee80211_action_ht_txchwidth),
|
|
return EINVAL);
|
|
break;
|
|
case IEEE80211_ACTION_HT_MIMOPWRSAVE:
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm,
|
|
sizeof(struct ieee80211_action_ht_mimopowersave),
|
|
return EINVAL);
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef IEEE80211_DEBUG
|
|
/*
|
|
* Debugging support.
|
|
*/
|
|
void
|
|
ieee80211_ssid_mismatch(struct ieee80211vap *vap, const char *tag,
|
|
uint8_t mac[IEEE80211_ADDR_LEN], uint8_t *ssid)
|
|
{
|
|
printf("[%s] discard %s frame, ssid mismatch: ",
|
|
ether_sprintf(mac), tag);
|
|
ieee80211_print_essid(ssid + 2, ssid[1]);
|
|
printf("\n");
|
|
}
|
|
|
|
/*
|
|
* Return the bssid of a frame.
|
|
*/
|
|
static const uint8_t *
|
|
ieee80211_getbssid(struct ieee80211vap *vap, const struct ieee80211_frame *wh)
|
|
{
|
|
if (vap->iv_opmode == IEEE80211_M_STA)
|
|
return wh->i_addr2;
|
|
if ((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) != IEEE80211_FC1_DIR_NODS)
|
|
return wh->i_addr1;
|
|
if ((wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == IEEE80211_FC0_SUBTYPE_PS_POLL)
|
|
return wh->i_addr1;
|
|
return wh->i_addr3;
|
|
}
|
|
|
|
#include <machine/stdarg.h>
|
|
|
|
void
|
|
ieee80211_note(struct ieee80211vap *vap, const char *fmt, ...)
|
|
{
|
|
char buf[128]; /* XXX */
|
|
va_list ap;
|
|
|
|
va_start(ap, fmt);
|
|
vsnprintf(buf, sizeof(buf), fmt, ap);
|
|
va_end(ap);
|
|
|
|
if_printf(vap->iv_ifp, "%s", buf); /* NB: no \n */
|
|
}
|
|
|
|
void
|
|
ieee80211_note_frame(struct ieee80211vap *vap,
|
|
const struct ieee80211_frame *wh,
|
|
const char *fmt, ...)
|
|
{
|
|
char buf[128]; /* XXX */
|
|
va_list ap;
|
|
|
|
va_start(ap, fmt);
|
|
vsnprintf(buf, sizeof(buf), fmt, ap);
|
|
va_end(ap);
|
|
if_printf(vap->iv_ifp, "[%s] %s\n",
|
|
ether_sprintf(ieee80211_getbssid(vap, wh)), buf);
|
|
}
|
|
|
|
void
|
|
ieee80211_note_mac(struct ieee80211vap *vap,
|
|
const uint8_t mac[IEEE80211_ADDR_LEN],
|
|
const char *fmt, ...)
|
|
{
|
|
char buf[128]; /* XXX */
|
|
va_list ap;
|
|
|
|
va_start(ap, fmt);
|
|
vsnprintf(buf, sizeof(buf), fmt, ap);
|
|
va_end(ap);
|
|
if_printf(vap->iv_ifp, "[%s] %s\n", ether_sprintf(mac), buf);
|
|
}
|
|
|
|
void
|
|
ieee80211_discard_frame(struct ieee80211vap *vap,
|
|
const struct ieee80211_frame *wh,
|
|
const char *type, const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
|
|
if_printf(vap->iv_ifp, "[%s] discard ",
|
|
ether_sprintf(ieee80211_getbssid(vap, wh)));
|
|
if (type == NULL) {
|
|
printf("%s frame, ", ieee80211_mgt_subtype_name[
|
|
(wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) >>
|
|
IEEE80211_FC0_SUBTYPE_SHIFT]);
|
|
} else
|
|
printf("%s frame, ", type);
|
|
va_start(ap, fmt);
|
|
vprintf(fmt, ap);
|
|
va_end(ap);
|
|
printf("\n");
|
|
}
|
|
|
|
void
|
|
ieee80211_discard_ie(struct ieee80211vap *vap,
|
|
const struct ieee80211_frame *wh,
|
|
const char *type, const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
|
|
if_printf(vap->iv_ifp, "[%s] discard ",
|
|
ether_sprintf(ieee80211_getbssid(vap, wh)));
|
|
if (type != NULL)
|
|
printf("%s information element, ", type);
|
|
else
|
|
printf("information element, ");
|
|
va_start(ap, fmt);
|
|
vprintf(fmt, ap);
|
|
va_end(ap);
|
|
printf("\n");
|
|
}
|
|
|
|
void
|
|
ieee80211_discard_mac(struct ieee80211vap *vap,
|
|
const uint8_t mac[IEEE80211_ADDR_LEN],
|
|
const char *type, const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
|
|
if_printf(vap->iv_ifp, "[%s] discard ", ether_sprintf(mac));
|
|
if (type != NULL)
|
|
printf("%s frame, ", type);
|
|
else
|
|
printf("frame, ");
|
|
va_start(ap, fmt);
|
|
vprintf(fmt, ap);
|
|
va_end(ap);
|
|
printf("\n");
|
|
}
|
|
#endif /* IEEE80211_DEBUG */
|