freebsd-skq/sys/powerpc/booke/locore.S
nwhitehorn 2127edd2e4 MFppc64:
Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kernel configurations must be
updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00

807 lines
17 KiB
ArmAsm

/*-
* Copyright (C) 2007-2009 Semihalf, Rafal Jaworowski <raj@semihalf.com>
* Copyright (C) 2006 Semihalf, Marian Balakowicz <m8@semihalf.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "assym.s"
#include <sys/mutex.h>
#include <machine/asm.h>
#include <machine/hid.h>
#include <machine/param.h>
#include <machine/spr.h>
#include <machine/pte.h>
#include <machine/trap.h>
#include <machine/vmparam.h>
#include <machine/tlb.h>
#define TMPSTACKSZ 16384
.text
.globl btext
btext:
/*
* This symbol is here for the benefit of kvm_mkdb, and is supposed to
* mark the start of kernel text.
*/
.globl kernel_text
kernel_text:
/*
* Startup entry. Note, this must be the first thing in the text segment!
*/
.text
.globl __start
__start:
/*
* Assumptions on the boot loader:
* - system memory starts from physical address 0
* - it's mapped by a single TBL1 entry
* - TLB1 mapping is 1:1 pa to va
* - kernel is loaded at 16MB boundary
* - all PID registers are set to the same value
* - CPU is running in AS=0
*
* Registers contents provided by the loader(8):
* r1 : stack pointer
* r3 : metadata pointer
*
* We rearrange the TLB1 layout as follows:
* - find TLB1 entry we started in
* - make sure it's protected, ivalidate other entries
* - create temp entry in the second AS (make sure it's not TLB[1])
* - switch to temp mapping
* - map 16MB of RAM in TLB1[1]
* - use AS=1, set EPN to KERNBASE and RPN to kernel load address
* - switch to to TLB1[1] mapping
* - invalidate temp mapping
*
* locore registers use:
* r1 : stack pointer
* r2 : trace pointer (AP only, for early diagnostics)
* r3-r27 : scratch registers
* r28 : kernload
* r29 : temp TLB1 entry
* r30 : initial TLB1 entry we started in
* r31 : metadata pointer
*/
/*
* Keep metadata ptr in r31 for later use.
*/
mr %r31, %r3
/*
* Initial cleanup
*/
li %r3, PSL_DE /* Keep debug exceptions for CodeWarrior. */
mtmsr %r3
isync
lis %r3, HID0_E500_DEFAULT_SET@h
ori %r3, %r3, HID0_E500_DEFAULT_SET@l
mtspr SPR_HID0, %r3
isync
lis %r3, HID1_E500_DEFAULT_SET@h
ori %r3, %r3, HID1_E500_DEFAULT_SET@l
mtspr SPR_HID1, %r3
isync
/* Invalidate all entries in TLB0 */
li %r3, 0
bl tlb_inval_all
/*
* Locate the TLB1 entry that maps this code
*/
bl 1f
1: mflr %r3
bl tlb1_find_current /* the entry number found is returned in r30 */
bl tlb1_inval_all_but_current
/*
* Create temporary mapping in AS=1 and switch to it
*/
bl tlb1_temp_mapping_as1
mfmsr %r3
ori %r3, %r3, (PSL_IS | PSL_DS)
bl 2f
2: mflr %r4
addi %r4, %r4, 20
mtspr SPR_SRR0, %r4
mtspr SPR_SRR1, %r3
rfi /* Switch context */
/*
* Invalidate initial entry
*/
mr %r3, %r30
bl tlb1_inval_entry
/*
* Setup final mapping in TLB1[1] and switch to it
*/
/* Final kernel mapping, map in 16 MB of RAM */
lis %r3, MAS0_TLBSEL1@h /* Select TLB1 */
li %r4, 1 /* Entry 1 */
rlwimi %r3, %r4, 16, 12, 15
mtspr SPR_MAS0, %r3
isync
li %r3, (TLB_SIZE_16M << MAS1_TSIZE_SHIFT)@l
oris %r3, %r3, (MAS1_VALID | MAS1_IPROT)@h
mtspr SPR_MAS1, %r3 /* note TS was not filled, so it's TS=0 */
isync
lis %r3, KERNBASE@h
ori %r3, %r3, KERNBASE@l /* EPN = KERNBASE */
#ifdef SMP
ori %r3, %r3, MAS2_M@l /* WIMGE = 0b00100 */
#endif
mtspr SPR_MAS2, %r3
isync
/* Discover phys load address */
bl 3f
3: mflr %r4 /* Use current address */
rlwinm %r4, %r4, 0, 0, 7 /* 16MB alignment mask */
mr %r28, %r4 /* Keep kernel load address */
ori %r4, %r4, (MAS3_SX | MAS3_SW | MAS3_SR)@l
mtspr SPR_MAS3, %r4 /* Set RPN and protection */
isync
tlbwe
isync
msync
/* Switch to the above TLB1[1] mapping */
bl 4f
4: mflr %r4
rlwinm %r4, %r4, 0, 8, 31 /* Current offset from kernel load address */
rlwinm %r3, %r3, 0, 0, 19
add %r4, %r4, %r3 /* Convert to kernel virtual address */
addi %r4, %r4, 36
li %r3, PSL_DE /* Note AS=0 */
mtspr SPR_SRR0, %r4
mtspr SPR_SRR1, %r3
rfi
/*
* Invalidate temp mapping
*/
mr %r3, %r29
bl tlb1_inval_entry
/*
* Save kernel load address for later use.
*/
lis %r3, kernload@ha
addi %r3, %r3, kernload@l
stw %r28, 0(%r3)
#ifdef SMP
/*
* APs need a separate copy of kernload info within the __boot_page
* area so they can access this value very early, before their TLBs
* are fully set up and the kernload global location is available.
*/
lis %r3, kernload_ap@ha
addi %r3, %r3, kernload_ap@l
stw %r28, 0(%r3)
msync
#endif
/*
* Setup a temporary stack
*/
lis %r1, tmpstack@ha
addi %r1, %r1, tmpstack@l
addi %r1, %r1, (TMPSTACKSZ - 8)
/*
* Initialise exception vector offsets
*/
bl ivor_setup
/*
* Set up arguments and jump to system initialization code
*/
lis %r3, kernel_text@ha
addi %r3, %r3, kernel_text@l
lis %r4, _end@ha
addi %r4, %r4, _end@l
mr %r5, %r31 /* metadata ptr */
/* Prepare e500 core */
bl e500_init
/* Switch to thread0.td_kstack now */
mr %r1, %r3
li %r3, 0
stw %r3, 0(%r1)
/* Machine independet part, does not return */
bl mi_startup
/* NOT REACHED */
5: b 5b
#ifdef SMP
/************************************************************************/
/* AP Boot page */
/************************************************************************/
.text
.globl __boot_page
.align 12
__boot_page:
bl 1f
kernload_ap:
.long 0
/*
* Initial configuration
*/
1:
/* Set HIDs */
lis %r3, HID0_E500_DEFAULT_SET@h
ori %r3, %r3, HID0_E500_DEFAULT_SET@l
mtspr SPR_HID0, %r3
isync
lis %r3, HID1_E500_DEFAULT_SET@h
ori %r3, %r3, HID1_E500_DEFAULT_SET@l
mtspr SPR_HID1, %r3
isync
/* Enable branch prediction */
li %r3, BUCSR_BPEN
mtspr SPR_BUCSR, %r3
isync
/* Invalidate all entries in TLB0 */
li %r3, 0
bl tlb_inval_all
/*
* Find TLB1 entry which is translating us now
*/
bl 2f
2: mflr %r3
bl tlb1_find_current /* the entry number found is in r30 */
bl tlb1_inval_all_but_current
/*
* Create temporary translation in AS=1 and switch to it
*/
bl tlb1_temp_mapping_as1
mfmsr %r3
ori %r3, %r3, (PSL_IS | PSL_DS)
bl 3f
3: mflr %r4
addi %r4, %r4, 20
mtspr SPR_SRR0, %r4
mtspr SPR_SRR1, %r3
rfi /* Switch context */
/*
* Invalidate initial entry
*/
mr %r3, %r30
bl tlb1_inval_entry
/*
* Setup final mapping in TLB1[1] and switch to it
*/
/* Final kernel mapping, map in 16 MB of RAM */
lis %r3, MAS0_TLBSEL1@h /* Select TLB1 */
li %r4, 1 /* Entry 1 */
rlwimi %r3, %r4, 16, 4, 15
mtspr SPR_MAS0, %r3
isync
li %r3, (TLB_SIZE_16M << MAS1_TSIZE_SHIFT)@l
oris %r3, %r3, (MAS1_VALID | MAS1_IPROT)@h
mtspr SPR_MAS1, %r3 /* note TS was not filled, so it's TS=0 */
isync
lis %r3, KERNBASE@h
ori %r3, %r3, KERNBASE@l /* EPN = KERNBASE */
ori %r3, %r3, MAS2_M@l /* WIMGE = 0b00100 */
mtspr SPR_MAS2, %r3
isync
/* Retrieve kernel load [physical] address from kernload_ap */
bl 4f
4: mflr %r3
rlwinm %r3, %r3, 0, 0, 19
lis %r4, kernload_ap@h
ori %r4, %r4, kernload_ap@l
lis %r5, __boot_page@h
ori %r5, %r5, __boot_page@l
sub %r4, %r4, %r5 /* offset of kernload_ap within __boot_page */
lwzx %r3, %r4, %r3
/* Set RPN and protection */
ori %r3, %r3, (MAS3_SX | MAS3_SW | MAS3_SR)@l
mtspr SPR_MAS3, %r3
isync
tlbwe
isync
msync
/* Switch to the final mapping */
bl 5f
5: mflr %r3
rlwinm %r3, %r3, 0, 0xfff /* Offset from boot page start */
add %r3, %r3, %r5 /* Make this virtual address */
addi %r3, %r3, 32
li %r4, 0 /* Note AS=0 */
mtspr SPR_SRR0, %r3
mtspr SPR_SRR1, %r4
rfi
/*
* At this point we're running at virtual addresses KERNBASE and beyond so
* it's allowed to directly access all locations the kernel was linked
* against.
*/
/*
* Invalidate temp mapping
*/
mr %r3, %r29
bl tlb1_inval_entry
/*
* Setup a temporary stack
*/
lis %r1, tmpstack@ha
addi %r1, %r1, tmpstack@l
addi %r1, %r1, (TMPSTACKSZ - 8)
/*
* Initialise exception vector offsets
*/
bl ivor_setup
/*
* Assign our pcpu instance
*/
lis %r3, ap_pcpu@h
ori %r3, %r3, ap_pcpu@l
lwz %r3, 0(%r3)
mtsprg0 %r3
bl pmap_bootstrap_ap
bl cpudep_ap_bootstrap
/* Switch to the idle thread's kstack */
mr %r1, %r3
bl machdep_ap_bootstrap
/* NOT REACHED */
6: b 6b
#endif /* SMP */
/*
* Invalidate all entries in the given TLB.
*
* r3 TLBSEL
*/
tlb_inval_all:
rlwinm %r3, %r3, 3, 0x18 /* TLBSEL */
ori %r3, %r3, 0x4 /* INVALL */
tlbivax 0, %r3
isync
msync
tlbsync
msync
blr
/*
* expects address to look up in r3, returns entry number in r30
*
* FIXME: the hidden assumption is we are now running in AS=0, but we should
* retrieve actual AS from MSR[IS|DS] and put it in MAS6[SAS]
*/
tlb1_find_current:
mfspr %r17, SPR_PID0
slwi %r17, %r17, MAS6_SPID0_SHIFT
mtspr SPR_MAS6, %r17
isync
tlbsx 0, %r3
mfspr %r17, SPR_MAS0
rlwinm %r30, %r17, 16, 20, 31 /* MAS0[ESEL] -> r30 */
/* Make sure we have IPROT set on the entry */
mfspr %r17, SPR_MAS1
oris %r17, %r17, MAS1_IPROT@h
mtspr SPR_MAS1, %r17
isync
tlbwe
isync
msync
blr
/*
* Invalidates a single entry in TLB1.
*
* r3 ESEL
* r4-r5 scratched
*/
tlb1_inval_entry:
lis %r4, MAS0_TLBSEL1@h /* Select TLB1 */
rlwimi %r4, %r3, 16, 12, 15 /* Select our entry */
mtspr SPR_MAS0, %r4
isync
tlbre
li %r5, 0 /* MAS1[V] = 0 */
mtspr SPR_MAS1, %r5
isync
tlbwe
isync
msync
blr
/*
* r30 current entry number
* r29 returned temp entry
* r3-r5 scratched
*/
tlb1_temp_mapping_as1:
/* Read our current translation */
lis %r3, MAS0_TLBSEL1@h /* Select TLB1 */
rlwimi %r3, %r30, 16, 12, 15 /* Select our current entry */
mtspr SPR_MAS0, %r3
isync
tlbre
/*
* Prepare and write temp entry
*
* FIXME this is not robust against overflow i.e. when the current
* entry is the last in TLB1
*/
lis %r3, MAS0_TLBSEL1@h /* Select TLB1 */
addi %r29, %r30, 1 /* Use next entry. */
li %r4, 1
cmpw %r4, %r29
bne 1f
addi %r29, %r29, 1
1: rlwimi %r3, %r29, 16, 12, 15 /* Select temp entry */
mtspr SPR_MAS0, %r3
isync
mfspr %r5, SPR_MAS1
li %r4, 1 /* AS=1 */
rlwimi %r5, %r4, 12, 19, 19
li %r4, 0 /* Global mapping, TID=0 */
rlwimi %r5, %r4, 16, 8, 15
oris %r5, %r5, (MAS1_VALID | MAS1_IPROT)@h
mtspr SPR_MAS1, %r5
isync
tlbwe
isync
msync
blr
/*
* Loops over TLB1, invalidates all entries skipping the one which currently
* maps this code.
*
* r30 current entry
* r3-r5 scratched
*/
tlb1_inval_all_but_current:
mr %r6, %r3
mfspr %r3, SPR_TLB1CFG /* Get number of entries */
andi. %r3, %r3, TLBCFG_NENTRY_MASK@l
li %r4, 0 /* Start from Entry 0 */
1: lis %r5, MAS0_TLBSEL1@h
rlwimi %r5, %r4, 16, 12, 15
mtspr SPR_MAS0, %r5
isync
tlbre
mfspr %r5, SPR_MAS1
cmpw %r4, %r30 /* our current entry? */
beq 2f
rlwinm %r5, %r5, 0, 2, 31 /* clear VALID and IPROT bits */
mtspr SPR_MAS1, %r5
isync
tlbwe
isync
msync
2: addi %r4, %r4, 1
cmpw %r4, %r3 /* Check if this is the last entry */
bne 1b
blr
#ifdef SMP
__boot_page_padding:
/*
* Boot page needs to be exactly 4K, with the last word of this page
* acting as the reset vector, so we need to stuff the remainder.
* Upon release from holdoff CPU fetches the last word of the boot
* page.
*/
.space 4092 - (__boot_page_padding - __boot_page)
b __boot_page
#endif /* SMP */
/************************************************************************/
/* locore subroutines */
/************************************************************************/
ivor_setup:
/* Set base address of interrupt handler routines */
lis %r3, interrupt_vector_base@h
mtspr SPR_IVPR, %r3
/* Assign interrupt handler routines offsets */
li %r3, int_critical_input@l
mtspr SPR_IVOR0, %r3
li %r3, int_machine_check@l
mtspr SPR_IVOR1, %r3
li %r3, int_data_storage@l
mtspr SPR_IVOR2, %r3
li %r3, int_instr_storage@l
mtspr SPR_IVOR3, %r3
li %r3, int_external_input@l
mtspr SPR_IVOR4, %r3
li %r3, int_alignment@l
mtspr SPR_IVOR5, %r3
li %r3, int_program@l
mtspr SPR_IVOR6, %r3
li %r3, int_syscall@l
mtspr SPR_IVOR8, %r3
li %r3, int_decrementer@l
mtspr SPR_IVOR10, %r3
li %r3, int_fixed_interval_timer@l
mtspr SPR_IVOR11, %r3
li %r3, int_watchdog@l
mtspr SPR_IVOR12, %r3
li %r3, int_data_tlb_error@l
mtspr SPR_IVOR13, %r3
li %r3, int_inst_tlb_error@l
mtspr SPR_IVOR14, %r3
li %r3, int_debug@l
mtspr SPR_IVOR15, %r3
blr
/*
* void tid_flush(tlbtid_t tid);
*
* Invalidate all TLB0 entries which match the given TID. Note this is
* dedicated for cases when invalidation(s) should NOT be propagated to other
* CPUs.
*
* Global vars tlb0_ways, tlb0_entries_per_way are assumed to have been set up
* correctly (by tlb0_get_tlbconf()).
*
*/
ENTRY(tid_flush)
cmpwi %r3, TID_KERNEL
beq tid_flush_end /* don't evict kernel translations */
/* Number of TLB0 ways */
lis %r4, tlb0_ways@h
ori %r4, %r4, tlb0_ways@l
lwz %r4, 0(%r4)
/* Number of entries / way */
lis %r5, tlb0_entries_per_way@h
ori %r5, %r5, tlb0_entries_per_way@l
lwz %r5, 0(%r5)
/* Disable interrupts */
mfmsr %r10
wrteei 0
li %r6, 0 /* ways counter */
loop_ways:
li %r7, 0 /* entries [per way] counter */
loop_entries:
/* Select TLB0 and ESEL (way) */
lis %r8, MAS0_TLBSEL0@h
rlwimi %r8, %r6, 16, 14, 15
mtspr SPR_MAS0, %r8
isync
/* Select EPN (entry within the way) */
rlwinm %r8, %r7, 12, 13, 19
mtspr SPR_MAS2, %r8
isync
tlbre
/* Check if valid entry */
mfspr %r8, SPR_MAS1
andis. %r9, %r8, MAS1_VALID@h
beq next_entry /* invalid entry */
/* Check if this is our TID */
rlwinm %r9, %r8, 16, 24, 31
cmplw %r9, %r3
bne next_entry /* not our TID */
/* Clear VALID bit */
rlwinm %r8, %r8, 0, 1, 31
mtspr SPR_MAS1, %r8
isync
tlbwe
isync
msync
next_entry:
addi %r7, %r7, 1
cmpw %r7, %r5
bne loop_entries
/* Next way */
addi %r6, %r6, 1
cmpw %r6, %r4
bne loop_ways
/* Restore MSR (possibly re-enable interrupts) */
mtmsr %r10
isync
tid_flush_end:
blr
/*
* Cache disable/enable/inval sequences according
* to section 2.16 of E500CORE RM.
*/
ENTRY(dcache_inval)
/* Invalidate d-cache */
mfspr %r3, SPR_L1CSR0
ori %r3, %r3, (L1CSR0_DCFI | L1CSR0_DCLFR)@l
msync
isync
mtspr SPR_L1CSR0, %r3
isync
1: mfspr %r3, SPR_L1CSR0
andi. %r3, %r3, L1CSR0_DCFI
bne 1b
blr
ENTRY(dcache_disable)
/* Disable d-cache */
mfspr %r3, SPR_L1CSR0
li %r4, L1CSR0_DCE@l
not %r4, %r4
and %r3, %r3, %r4
msync
isync
mtspr SPR_L1CSR0, %r3
isync
blr
ENTRY(dcache_enable)
/* Enable d-cache */
mfspr %r3, SPR_L1CSR0
oris %r3, %r3, (L1CSR0_DCPE | L1CSR0_DCE)@h
ori %r3, %r3, (L1CSR0_DCPE | L1CSR0_DCE)@l
msync
isync
mtspr SPR_L1CSR0, %r3
isync
blr
ENTRY(icache_inval)
/* Invalidate i-cache */
mfspr %r3, SPR_L1CSR1
ori %r3, %r3, (L1CSR1_ICFI | L1CSR1_ICLFR)@l
isync
mtspr SPR_L1CSR1, %r3
isync
1: mfspr %r3, SPR_L1CSR1
andi. %r3, %r3, L1CSR1_ICFI
bne 1b
blr
ENTRY(icache_disable)
/* Disable i-cache */
mfspr %r3, SPR_L1CSR1
li %r4, L1CSR1_ICE@l
not %r4, %r4
and %r3, %r3, %r4
isync
mtspr SPR_L1CSR1, %r3
isync
blr
ENTRY(icache_enable)
/* Enable i-cache */
mfspr %r3, SPR_L1CSR1
oris %r3, %r3, (L1CSR1_ICPE | L1CSR1_ICE)@h
ori %r3, %r3, (L1CSR1_ICPE | L1CSR1_ICE)@l
isync
mtspr SPR_L1CSR1, %r3
isync
blr
/*
* int setfault()
*
* Similar to setjmp to setup for handling faults on accesses to user memory.
* Any routine using this may only call bcopy, either the form below,
* or the (currently used) C code optimized, so it doesn't use any non-volatile
* registers.
*/
.globl setfault
setfault:
mflr %r0
mfsprg0 %r4
lwz %r4, PC_CURTHREAD(%r4)
lwz %r4, TD_PCB(%r4)
stw %r3, PCB_ONFAULT(%r4)
mfcr %r10
mfctr %r11
mfxer %r12
stw %r0, 0(%r3)
stw %r1, 4(%r3)
stw %r2, 8(%r3)
stmw %r10, 12(%r3) /* store CR, CTR, XER, [r13 .. r31] */
li %r3, 0 /* return FALSE */
blr
/************************************************************************/
/* Data section */
/************************************************************************/
.data
.align 4
tmpstack:
.space TMPSTACKSZ
/*
* Compiled KERNBASE locations
*/
.globl kernbase
.set kernbase, KERNBASE
/*
* Globals
*/
#define INTRCNT_COUNT 256 /* max(HROWPIC_IRQMAX,OPENPIC_IRQMAX) */
GLOBAL(kernload)
.long 0
GLOBAL(intrnames)
.space INTRCNT_COUNT * (MAXCOMLEN + 1) * 2
GLOBAL(eintrnames)
.align 4
GLOBAL(intrcnt)
.space INTRCNT_COUNT * 4 * 2
GLOBAL(eintrcnt)
#include <powerpc/booke/trap_subr.S>