7eeed3c838
This change includes support for SCSI SMR drives (which conform to the Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to the Zoned ATA Command Set or ZAC spec) behind SAS expanders. This includes full management support through the GEOM BIO interface, and through a new userland utility, zonectl(8), and through camcontrol(8). This is now ready for filesystems to use to detect and manage zoned drives. (There is no work in progress that I know of to use this for ZFS or UFS, if anyone is interested, let me know and I may have some suggestions.) Also, improve ATA command passthrough and dispatch support, both via ATA and ATA passthrough over SCSI. Also, add support to camcontrol(8) for the ATA Extended Power Conditions feature set. You can now manage ATA device power states, and set various idle time thresholds for a drive to enter lower power states. Note that this change cannot be MFCed in full, because it depends on changes to the struct bio API that break compatilibity. In order to avoid breaking the stable API, only changes that don't touch or depend on the struct bio changes can be merged. For example, the camcontrol(8) changes don't depend on the new bio API, but zonectl(8) and the probe changes to the da(4) and ada(4) drivers do depend on it. Also note that the SMR changes have not yet been tested with an actual SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT layer, so any testing help would be appreciated. These changes have been tested with Seagate Host Aware SATA drives attached to both SAS and SATA controllers. Also, I do not have any SATA Host Managed devices, and I suspect that it may take additional (hopefully minor) changes to support them. Thanks to Seagate for supplying the test hardware and answering questions. sbin/camcontrol/Makefile: Add epc.c and zone.c. sbin/camcontrol/camcontrol.8: Document the zone and epc subcommands. sbin/camcontrol/camcontrol.c: Add the zone and epc subcommands. Add auxiliary register support to build_ata_cmd(). Make sure to set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA flags as appropriate for ATA commands. Add a new get_ata_status() function to parse ATA result from SCSI sense descriptors (for ATA passthrough over SCSI) and ATA I/O requests. sbin/camcontrol/camcontrol.h: Update the build_ata_cmd() prototype Add get_ata_status(), zone(), and epc(). sbin/camcontrol/epc.c: Support for ATA Extended Power Conditions features. This includes support for all features documented in the ACS-4 Revision 12 specification from t13.org (dated February 18, 2016). The EPC feature set allows putting a drive into a power power mode immediately, or setting timeouts so that the drive will automatically enter progressively lower power states after various idle times. sbin/camcontrol/fwdownload.c: Update the firmware download code for the new build_ata_cmd() arguments. sbin/camcontrol/zone.c: Implement support for Shingled Magnetic Recording (SMR) drives via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA Command Set (ZAC). These specs were developed in concert, and are functionally identical. The primary differences are due to SCSI and ATA differences. (SCSI is big endian, ATA is little endian, for example.) This includes support for all commands defined in the ZBC and ZAC specs. sys/cam/ata/ata_all.c: Decode a number of additional ATA command names in ata_op_string(). Add a new CCB building function, ata_read_log(). Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building functions. These support both DMA and NCQ encapsulation. sys/cam/ata/ata_all.h: Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and ata_zac_mgmt_in(). sys/cam/ata/ata_da.c: Revamp the ada(4) driver to support zoned devices. Add four new probe states to gather information needed for zone support. Add a new adasetflags() function to avoid duplication of large blocks of flag setting between the async handler and register functions. Add new sysctl variables that describe zone support and paramters. Add support for the new BIO_ZONE bio, and all of its subcommands: DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP, DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS. sys/cam/scsi/scsi_all.c: Add command descriptions for the ZBC IN/OUT commands. Add descriptions for ZBC Host Managed devices. Add a new function, scsi_ata_pass() to do ATA passthrough over SCSI. This will eventually replace scsi_ata_pass_16() -- it can create the 12, 16, and 32-byte variants of the ATA PASS-THROUGH command, and supports setting all of the registers defined as of SAT-4, Revision 5 (March 11, 2016). Change scsi_ata_identify() to use scsi_ata_pass() instead of scsi_ata_pass_16(). Add a new scsi_ata_read_log() function to facilitate reading ATA logs via SCSI. sys/cam/scsi/scsi_all.h: Add the new ATA PASS-THROUGH(32) command CDB. Add extended and variable CDB opcodes. Add Zoned Block Device Characteristics VPD page. Add ATA Return SCSI sense descriptor. Add prototypes for scsi_ata_read_log() and scsi_ata_pass(). sys/cam/scsi/scsi_da.c: Revamp the da(4) driver to support zoned devices. Add five new probe states, four of which are needed for ATA devices. Add five new sysctl variables that describe zone support and parameters. The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC devices when they are attached via a SCSI to ATA Translation (SAT) layer. Since ZBC -> ZAC translation is a new feature in the T10 SAT-4 spec, most SATA drives will be supported via ATA commands sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will prefer the ZBC interface, if it is available, for performance reasons, but will use the ATA PASS-THROUGH interface to the ZAC command set if the SAT layer doesn't support translation yet. As I mentioned above, ZBC command support is untested. Add support for the new BIO_ZONE bio, and all of its subcommands: DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP, DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS. Add scsi_zbc_in() and scsi_zbc_out() CCB building functions. Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB building functions. Note that these have return values, unlike almost all other CCB building functions in CAM. The reason is that they can fail, depending upon the particular combination of input parameters. The primary failure case is if the user wants NCQ, but fails to specify additional CDB storage. NCQ requires using the 32-byte version of the SCSI ATA PASS-THROUGH command, and the current CAM CDB size is 16 bytes. sys/cam/scsi/scsi_da.h: Add ZBC IN and ZBC OUT CDBs and opcodes. Add SCSI Report Zones data structures. Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and scsi_ata_zac_mgmt_in() prototypes. sys/dev/ahci/ahci.c: Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver. ahci_setup_fis() previously set the top bits of the sector count register in the FIS to 0 for FPDMA commands. This is okay for read and write, because the PRIO field is in the only thing in those bits, and we don't implement that further up the stack. But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that byte, so it needs to be transmitted to the drive. In ahci_setup_fis(), always set the the top 8 bits of the sector count register. We need it in both the standard and NCQ / FPDMA cases. sys/geom/eli/g_eli.c: Pass BIO_ZONE commands through the GELI class. sys/geom/geom.h: Add g_io_zonecmd() prototype. sys/geom/geom_dev.c: Add new DIOCZONECMD ioctl, which allows sending zone commands to disks. sys/geom/geom_disk.c: Add support for BIO_ZONE commands. sys/geom/geom_disk.h: Add a new flag, DISKFLAG_CANZONE, that indicates that a given GEOM disk client can handle BIO_ZONE commands. sys/geom/geom_io.c: Add a new function, g_io_zonecmd(), that handles execution of BIO_ZONE commands. Add permissions check for BIO_ZONE commands. Add command decoding for BIO_ZONE commands. sys/geom/geom_subr.c: Add DDB command decoding for BIO_ZONE commands. sys/kern/subr_devstat.c: Record statistics for REPORT ZONES commands. Note that the number of bytes transferred for REPORT ZONES won't quite match what is received from the harware. This is because we're necessarily counting bytes coming from the da(4) / ada(4) drivers, which are using the disk_zone.h interface to communicate up the stack. The structure sizes it uses are slightly different than the SCSI and ATA structure sizes. sys/sys/ata.h: Add many bit and structure definitions for ZAC, NCQ, and EPC command support. sys/sys/bio.h: Convert the bio_cmd field to a straight enumeration. This will yield more space for additional commands in the future. After change r297955 and other related changes, this is now possible. Converting to an enumeration will also prevent use as a bitmask in the future. sys/sys/disk.h: Define the DIOCZONECMD ioctl. sys/sys/disk_zone.h: Add a new API for managing zoned disks. This is very close to the SCSI ZBC and ATA ZAC standards, but uses integers in native byte order instead of big endian (SCSI) or little endian (ATA) byte arrays. This is intended to offer to the complete feature set of the ZBC and ZAC disk management without requiring the application developer to include SCSI or ATA headers. We also use one set of headers for ioctl consumers and kernel bio-level consumers. sys/sys/param.h: Bump __FreeBSD_version for sys/bio.h command changes, and inclusion of SMR support. usr.sbin/Makefile: Add the zonectl utility. usr.sbin/diskinfo/diskinfo.c Add disk zoning capability to the 'diskinfo -v' output. usr.sbin/zonectl/Makefile: Add zonectl makefile. usr.sbin/zonectl/zonectl.8 zonectl(8) man page. usr.sbin/zonectl/zonectl.c The zonectl(8) utility. This allows managing SCSI or ATA zoned disks via the disk_zone.h API. You can report zones, reset write pointers, get parameters, etc. Sponsored by: Spectra Logic Differential Revision: https://reviews.freebsd.org/D6147 Reviewed by: wblock (documentation)
945 lines
23 KiB
C
945 lines
23 KiB
C
/*-
|
|
* Copyright (c) 2002 Poul-Henning Kamp
|
|
* Copyright (c) 2002 Networks Associates Technology, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This software was developed for the FreeBSD Project by Poul-Henning Kamp
|
|
* and NAI Labs, the Security Research Division of Network Associates, Inc.
|
|
* under DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as part of the
|
|
* DARPA CHATS research program.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The names of the authors may not be used to endorse or promote
|
|
* products derived from this software without specific prior written
|
|
* permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_geom.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/ctype.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/sbuf.h>
|
|
#include <sys/devicestat.h>
|
|
#include <machine/md_var.h>
|
|
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <geom/geom.h>
|
|
#include <geom/geom_disk.h>
|
|
#include <geom/geom_int.h>
|
|
|
|
#include <dev/led/led.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
struct g_disk_softc {
|
|
struct mtx done_mtx;
|
|
struct disk *dp;
|
|
struct sysctl_ctx_list sysctl_ctx;
|
|
struct sysctl_oid *sysctl_tree;
|
|
char led[64];
|
|
uint32_t state;
|
|
struct mtx start_mtx;
|
|
};
|
|
|
|
static g_access_t g_disk_access;
|
|
static g_start_t g_disk_start;
|
|
static g_ioctl_t g_disk_ioctl;
|
|
static g_dumpconf_t g_disk_dumpconf;
|
|
static g_provgone_t g_disk_providergone;
|
|
|
|
static struct g_class g_disk_class = {
|
|
.name = G_DISK_CLASS_NAME,
|
|
.version = G_VERSION,
|
|
.start = g_disk_start,
|
|
.access = g_disk_access,
|
|
.ioctl = g_disk_ioctl,
|
|
.providergone = g_disk_providergone,
|
|
.dumpconf = g_disk_dumpconf,
|
|
};
|
|
|
|
SYSCTL_DECL(_kern_geom);
|
|
static SYSCTL_NODE(_kern_geom, OID_AUTO, disk, CTLFLAG_RW, 0,
|
|
"GEOM_DISK stuff");
|
|
|
|
DECLARE_GEOM_CLASS(g_disk_class, g_disk);
|
|
|
|
static int
|
|
g_disk_access(struct g_provider *pp, int r, int w, int e)
|
|
{
|
|
struct disk *dp;
|
|
struct g_disk_softc *sc;
|
|
int error;
|
|
|
|
g_trace(G_T_ACCESS, "g_disk_access(%s, %d, %d, %d)",
|
|
pp->name, r, w, e);
|
|
g_topology_assert();
|
|
sc = pp->private;
|
|
if (sc == NULL || (dp = sc->dp) == NULL || dp->d_destroyed) {
|
|
/*
|
|
* Allow decreasing access count even if disk is not
|
|
* available anymore.
|
|
*/
|
|
if (r <= 0 && w <= 0 && e <= 0)
|
|
return (0);
|
|
return (ENXIO);
|
|
}
|
|
r += pp->acr;
|
|
w += pp->acw;
|
|
e += pp->ace;
|
|
error = 0;
|
|
if ((pp->acr + pp->acw + pp->ace) == 0 && (r + w + e) > 0) {
|
|
if (dp->d_open != NULL) {
|
|
error = dp->d_open(dp);
|
|
if (bootverbose && error != 0)
|
|
printf("Opened disk %s -> %d\n",
|
|
pp->name, error);
|
|
if (error != 0)
|
|
return (error);
|
|
}
|
|
pp->mediasize = dp->d_mediasize;
|
|
pp->sectorsize = dp->d_sectorsize;
|
|
if (dp->d_maxsize == 0) {
|
|
printf("WARNING: Disk drive %s%d has no d_maxsize\n",
|
|
dp->d_name, dp->d_unit);
|
|
dp->d_maxsize = DFLTPHYS;
|
|
}
|
|
if (dp->d_delmaxsize == 0) {
|
|
if (bootverbose && dp->d_flags & DISKFLAG_CANDELETE) {
|
|
printf("WARNING: Disk drive %s%d has no "
|
|
"d_delmaxsize\n", dp->d_name, dp->d_unit);
|
|
}
|
|
dp->d_delmaxsize = dp->d_maxsize;
|
|
}
|
|
pp->stripeoffset = dp->d_stripeoffset;
|
|
pp->stripesize = dp->d_stripesize;
|
|
dp->d_flags |= DISKFLAG_OPEN;
|
|
} else if ((pp->acr + pp->acw + pp->ace) > 0 && (r + w + e) == 0) {
|
|
if (dp->d_close != NULL) {
|
|
error = dp->d_close(dp);
|
|
if (error != 0)
|
|
printf("Closed disk %s -> %d\n",
|
|
pp->name, error);
|
|
}
|
|
sc->state = G_STATE_ACTIVE;
|
|
if (sc->led[0] != 0)
|
|
led_set(sc->led, "0");
|
|
dp->d_flags &= ~DISKFLAG_OPEN;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
g_disk_kerneldump(struct bio *bp, struct disk *dp)
|
|
{
|
|
struct g_kerneldump *gkd;
|
|
struct g_geom *gp;
|
|
|
|
gkd = (struct g_kerneldump*)bp->bio_data;
|
|
gp = bp->bio_to->geom;
|
|
g_trace(G_T_TOPOLOGY, "g_disk_kerneldump(%s, %jd, %jd)",
|
|
gp->name, (intmax_t)gkd->offset, (intmax_t)gkd->length);
|
|
if (dp->d_dump == NULL) {
|
|
g_io_deliver(bp, ENODEV);
|
|
return;
|
|
}
|
|
gkd->di.dumper = dp->d_dump;
|
|
gkd->di.priv = dp;
|
|
gkd->di.blocksize = dp->d_sectorsize;
|
|
gkd->di.maxiosize = dp->d_maxsize;
|
|
gkd->di.mediaoffset = gkd->offset;
|
|
if ((gkd->offset + gkd->length) > dp->d_mediasize)
|
|
gkd->length = dp->d_mediasize - gkd->offset;
|
|
gkd->di.mediasize = gkd->length;
|
|
g_io_deliver(bp, 0);
|
|
}
|
|
|
|
static void
|
|
g_disk_setstate(struct bio *bp, struct g_disk_softc *sc)
|
|
{
|
|
const char *cmd;
|
|
|
|
memcpy(&sc->state, bp->bio_data, sizeof(sc->state));
|
|
if (sc->led[0] != 0) {
|
|
switch (sc->state) {
|
|
case G_STATE_FAILED:
|
|
cmd = "1";
|
|
break;
|
|
case G_STATE_REBUILD:
|
|
cmd = "f5";
|
|
break;
|
|
case G_STATE_RESYNC:
|
|
cmd = "f1";
|
|
break;
|
|
default:
|
|
cmd = "0";
|
|
break;
|
|
}
|
|
led_set(sc->led, cmd);
|
|
}
|
|
g_io_deliver(bp, 0);
|
|
}
|
|
|
|
static void
|
|
g_disk_done(struct bio *bp)
|
|
{
|
|
struct bintime now;
|
|
struct bio *bp2;
|
|
struct g_disk_softc *sc;
|
|
|
|
/* See "notes" for why we need a mutex here */
|
|
/* XXX: will witness accept a mix of Giant/unGiant drivers here ? */
|
|
bp2 = bp->bio_parent;
|
|
sc = bp2->bio_to->private;
|
|
bp->bio_completed = bp->bio_length - bp->bio_resid;
|
|
binuptime(&now);
|
|
mtx_lock(&sc->done_mtx);
|
|
if (bp2->bio_error == 0)
|
|
bp2->bio_error = bp->bio_error;
|
|
bp2->bio_completed += bp->bio_completed;
|
|
|
|
switch (bp->bio_cmd) {
|
|
case BIO_ZONE:
|
|
bcopy(&bp->bio_zone, &bp2->bio_zone, sizeof(bp->bio_zone));
|
|
/*FALLTHROUGH*/
|
|
case BIO_READ:
|
|
case BIO_WRITE:
|
|
case BIO_DELETE:
|
|
case BIO_FLUSH:
|
|
devstat_end_transaction_bio_bt(sc->dp->d_devstat, bp, &now);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
bp2->bio_inbed++;
|
|
if (bp2->bio_children == bp2->bio_inbed) {
|
|
mtx_unlock(&sc->done_mtx);
|
|
bp2->bio_resid = bp2->bio_bcount - bp2->bio_completed;
|
|
g_io_deliver(bp2, bp2->bio_error);
|
|
} else
|
|
mtx_unlock(&sc->done_mtx);
|
|
g_destroy_bio(bp);
|
|
}
|
|
|
|
static int
|
|
g_disk_ioctl(struct g_provider *pp, u_long cmd, void * data, int fflag, struct thread *td)
|
|
{
|
|
struct disk *dp;
|
|
struct g_disk_softc *sc;
|
|
int error;
|
|
|
|
sc = pp->private;
|
|
dp = sc->dp;
|
|
|
|
if (dp->d_ioctl == NULL)
|
|
return (ENOIOCTL);
|
|
error = dp->d_ioctl(dp, cmd, data, fflag, td);
|
|
return (error);
|
|
}
|
|
|
|
static off_t
|
|
g_disk_maxsize(struct disk *dp, struct bio *bp)
|
|
{
|
|
if (bp->bio_cmd == BIO_DELETE)
|
|
return (dp->d_delmaxsize);
|
|
return (dp->d_maxsize);
|
|
}
|
|
|
|
static int
|
|
g_disk_maxsegs(struct disk *dp, struct bio *bp)
|
|
{
|
|
return ((g_disk_maxsize(dp, bp) / PAGE_SIZE) + 1);
|
|
}
|
|
|
|
static void
|
|
g_disk_advance(struct disk *dp, struct bio *bp, off_t off)
|
|
{
|
|
|
|
bp->bio_offset += off;
|
|
bp->bio_length -= off;
|
|
|
|
if ((bp->bio_flags & BIO_VLIST) != 0) {
|
|
bus_dma_segment_t *seg, *end;
|
|
|
|
seg = (bus_dma_segment_t *)bp->bio_data;
|
|
end = (bus_dma_segment_t *)bp->bio_data + bp->bio_ma_n;
|
|
off += bp->bio_ma_offset;
|
|
while (off >= seg->ds_len) {
|
|
KASSERT((seg != end),
|
|
("vlist request runs off the end"));
|
|
off -= seg->ds_len;
|
|
seg++;
|
|
}
|
|
bp->bio_ma_offset = off;
|
|
bp->bio_ma_n = end - seg;
|
|
bp->bio_data = (void *)seg;
|
|
} else if ((bp->bio_flags & BIO_UNMAPPED) != 0) {
|
|
bp->bio_ma += off / PAGE_SIZE;
|
|
bp->bio_ma_offset += off;
|
|
bp->bio_ma_offset %= PAGE_SIZE;
|
|
bp->bio_ma_n -= off / PAGE_SIZE;
|
|
} else {
|
|
bp->bio_data += off;
|
|
}
|
|
}
|
|
|
|
static void
|
|
g_disk_seg_limit(bus_dma_segment_t *seg, off_t *poffset,
|
|
off_t *plength, int *ppages)
|
|
{
|
|
uintptr_t seg_page_base;
|
|
uintptr_t seg_page_end;
|
|
off_t offset;
|
|
off_t length;
|
|
int seg_pages;
|
|
|
|
offset = *poffset;
|
|
length = *plength;
|
|
|
|
if (length > seg->ds_len - offset)
|
|
length = seg->ds_len - offset;
|
|
|
|
seg_page_base = trunc_page(seg->ds_addr + offset);
|
|
seg_page_end = round_page(seg->ds_addr + offset + length);
|
|
seg_pages = (seg_page_end - seg_page_base) >> PAGE_SHIFT;
|
|
|
|
if (seg_pages > *ppages) {
|
|
seg_pages = *ppages;
|
|
length = (seg_page_base + (seg_pages << PAGE_SHIFT)) -
|
|
(seg->ds_addr + offset);
|
|
}
|
|
|
|
*poffset = 0;
|
|
*plength -= length;
|
|
*ppages -= seg_pages;
|
|
}
|
|
|
|
static off_t
|
|
g_disk_vlist_limit(struct disk *dp, struct bio *bp, bus_dma_segment_t **pendseg)
|
|
{
|
|
bus_dma_segment_t *seg, *end;
|
|
off_t residual;
|
|
off_t offset;
|
|
int pages;
|
|
|
|
seg = (bus_dma_segment_t *)bp->bio_data;
|
|
end = (bus_dma_segment_t *)bp->bio_data + bp->bio_ma_n;
|
|
residual = bp->bio_length;
|
|
offset = bp->bio_ma_offset;
|
|
pages = g_disk_maxsegs(dp, bp);
|
|
while (residual != 0 && pages != 0) {
|
|
KASSERT((seg != end),
|
|
("vlist limit runs off the end"));
|
|
g_disk_seg_limit(seg, &offset, &residual, &pages);
|
|
seg++;
|
|
}
|
|
if (pendseg != NULL)
|
|
*pendseg = seg;
|
|
return (residual);
|
|
}
|
|
|
|
static bool
|
|
g_disk_limit(struct disk *dp, struct bio *bp)
|
|
{
|
|
bool limited = false;
|
|
off_t maxsz;
|
|
|
|
maxsz = g_disk_maxsize(dp, bp);
|
|
|
|
/*
|
|
* XXX: If we have a stripesize we should really use it here.
|
|
* Care should be taken in the delete case if this is done
|
|
* as deletes can be very sensitive to size given how they
|
|
* are processed.
|
|
*/
|
|
if (bp->bio_length > maxsz) {
|
|
bp->bio_length = maxsz;
|
|
limited = true;
|
|
}
|
|
|
|
if ((bp->bio_flags & BIO_VLIST) != 0) {
|
|
bus_dma_segment_t *firstseg, *endseg;
|
|
off_t residual;
|
|
|
|
firstseg = (bus_dma_segment_t*)bp->bio_data;
|
|
residual = g_disk_vlist_limit(dp, bp, &endseg);
|
|
if (residual != 0) {
|
|
bp->bio_ma_n = endseg - firstseg;
|
|
bp->bio_length -= residual;
|
|
limited = true;
|
|
}
|
|
} else if ((bp->bio_flags & BIO_UNMAPPED) != 0) {
|
|
bp->bio_ma_n =
|
|
howmany(bp->bio_ma_offset + bp->bio_length, PAGE_SIZE);
|
|
}
|
|
|
|
return (limited);
|
|
}
|
|
|
|
static void
|
|
g_disk_start(struct bio *bp)
|
|
{
|
|
struct bio *bp2, *bp3;
|
|
struct disk *dp;
|
|
struct g_disk_softc *sc;
|
|
int error;
|
|
off_t off;
|
|
|
|
sc = bp->bio_to->private;
|
|
if (sc == NULL || (dp = sc->dp) == NULL || dp->d_destroyed) {
|
|
g_io_deliver(bp, ENXIO);
|
|
return;
|
|
}
|
|
error = EJUSTRETURN;
|
|
switch(bp->bio_cmd) {
|
|
case BIO_DELETE:
|
|
if (!(dp->d_flags & DISKFLAG_CANDELETE)) {
|
|
error = EOPNOTSUPP;
|
|
break;
|
|
}
|
|
/* fall-through */
|
|
case BIO_READ:
|
|
case BIO_WRITE:
|
|
KASSERT((dp->d_flags & DISKFLAG_UNMAPPED_BIO) != 0 ||
|
|
(bp->bio_flags & BIO_UNMAPPED) == 0,
|
|
("unmapped bio not supported by disk %s", dp->d_name));
|
|
off = 0;
|
|
bp3 = NULL;
|
|
bp2 = g_clone_bio(bp);
|
|
if (bp2 == NULL) {
|
|
error = ENOMEM;
|
|
break;
|
|
}
|
|
for (;;) {
|
|
if (g_disk_limit(dp, bp2)) {
|
|
off += bp2->bio_length;
|
|
|
|
/*
|
|
* To avoid a race, we need to grab the next bio
|
|
* before we schedule this one. See "notes".
|
|
*/
|
|
bp3 = g_clone_bio(bp);
|
|
if (bp3 == NULL)
|
|
bp->bio_error = ENOMEM;
|
|
}
|
|
bp2->bio_done = g_disk_done;
|
|
bp2->bio_pblkno = bp2->bio_offset / dp->d_sectorsize;
|
|
bp2->bio_bcount = bp2->bio_length;
|
|
bp2->bio_disk = dp;
|
|
mtx_lock(&sc->start_mtx);
|
|
devstat_start_transaction_bio(dp->d_devstat, bp2);
|
|
mtx_unlock(&sc->start_mtx);
|
|
dp->d_strategy(bp2);
|
|
|
|
if (bp3 == NULL)
|
|
break;
|
|
|
|
bp2 = bp3;
|
|
bp3 = NULL;
|
|
g_disk_advance(dp, bp2, off);
|
|
}
|
|
break;
|
|
case BIO_GETATTR:
|
|
/* Give the driver a chance to override */
|
|
if (dp->d_getattr != NULL) {
|
|
if (bp->bio_disk == NULL)
|
|
bp->bio_disk = dp;
|
|
error = dp->d_getattr(bp);
|
|
if (error != -1)
|
|
break;
|
|
error = EJUSTRETURN;
|
|
}
|
|
if (g_handleattr_int(bp, "GEOM::candelete",
|
|
(dp->d_flags & DISKFLAG_CANDELETE) != 0))
|
|
break;
|
|
else if (g_handleattr_int(bp, "GEOM::fwsectors",
|
|
dp->d_fwsectors))
|
|
break;
|
|
else if (g_handleattr_int(bp, "GEOM::fwheads", dp->d_fwheads))
|
|
break;
|
|
else if (g_handleattr_off_t(bp, "GEOM::frontstuff", 0))
|
|
break;
|
|
else if (g_handleattr_str(bp, "GEOM::ident", dp->d_ident))
|
|
break;
|
|
else if (g_handleattr_uint16_t(bp, "GEOM::hba_vendor",
|
|
dp->d_hba_vendor))
|
|
break;
|
|
else if (g_handleattr_uint16_t(bp, "GEOM::hba_device",
|
|
dp->d_hba_device))
|
|
break;
|
|
else if (g_handleattr_uint16_t(bp, "GEOM::hba_subvendor",
|
|
dp->d_hba_subvendor))
|
|
break;
|
|
else if (g_handleattr_uint16_t(bp, "GEOM::hba_subdevice",
|
|
dp->d_hba_subdevice))
|
|
break;
|
|
else if (!strcmp(bp->bio_attribute, "GEOM::kerneldump"))
|
|
g_disk_kerneldump(bp, dp);
|
|
else if (!strcmp(bp->bio_attribute, "GEOM::setstate"))
|
|
g_disk_setstate(bp, sc);
|
|
else if (g_handleattr_uint16_t(bp, "GEOM::rotation_rate",
|
|
dp->d_rotation_rate))
|
|
break;
|
|
else
|
|
error = ENOIOCTL;
|
|
break;
|
|
case BIO_FLUSH:
|
|
g_trace(G_T_BIO, "g_disk_flushcache(%s)",
|
|
bp->bio_to->name);
|
|
if (!(dp->d_flags & DISKFLAG_CANFLUSHCACHE)) {
|
|
error = EOPNOTSUPP;
|
|
break;
|
|
}
|
|
/*FALLTHROUGH*/
|
|
case BIO_ZONE:
|
|
if (bp->bio_cmd == BIO_ZONE) {
|
|
if (!(dp->d_flags & DISKFLAG_CANZONE)) {
|
|
error = EOPNOTSUPP;
|
|
break;
|
|
}
|
|
g_trace(G_T_BIO, "g_disk_zone(%s)",
|
|
bp->bio_to->name);
|
|
}
|
|
bp2 = g_clone_bio(bp);
|
|
if (bp2 == NULL) {
|
|
g_io_deliver(bp, ENOMEM);
|
|
return;
|
|
}
|
|
bp2->bio_done = g_disk_done;
|
|
bp2->bio_disk = dp;
|
|
mtx_lock(&sc->start_mtx);
|
|
devstat_start_transaction_bio(dp->d_devstat, bp2);
|
|
mtx_unlock(&sc->start_mtx);
|
|
dp->d_strategy(bp2);
|
|
break;
|
|
default:
|
|
error = EOPNOTSUPP;
|
|
break;
|
|
}
|
|
if (error != EJUSTRETURN)
|
|
g_io_deliver(bp, error);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
g_disk_dumpconf(struct sbuf *sb, const char *indent, struct g_geom *gp, struct g_consumer *cp, struct g_provider *pp)
|
|
{
|
|
struct bio *bp;
|
|
struct disk *dp;
|
|
struct g_disk_softc *sc;
|
|
char *buf;
|
|
int res = 0;
|
|
|
|
sc = gp->softc;
|
|
if (sc == NULL || (dp = sc->dp) == NULL)
|
|
return;
|
|
if (indent == NULL) {
|
|
sbuf_printf(sb, " hd %u", dp->d_fwheads);
|
|
sbuf_printf(sb, " sc %u", dp->d_fwsectors);
|
|
return;
|
|
}
|
|
if (pp != NULL) {
|
|
sbuf_printf(sb, "%s<fwheads>%u</fwheads>\n",
|
|
indent, dp->d_fwheads);
|
|
sbuf_printf(sb, "%s<fwsectors>%u</fwsectors>\n",
|
|
indent, dp->d_fwsectors);
|
|
|
|
/*
|
|
* "rotationrate" is a little complicated, because the value
|
|
* returned by the drive might not be the RPM; 0 and 1 are
|
|
* special cases, and there's also a valid range.
|
|
*/
|
|
sbuf_printf(sb, "%s<rotationrate>", indent);
|
|
if (dp->d_rotation_rate == 0) /* Old drives don't */
|
|
sbuf_printf(sb, "unknown"); /* report RPM. */
|
|
else if (dp->d_rotation_rate == 1) /* Since 0 is used */
|
|
sbuf_printf(sb, "0"); /* above, SSDs use 1. */
|
|
else if ((dp->d_rotation_rate >= 0x041) &&
|
|
(dp->d_rotation_rate <= 0xfffe))
|
|
sbuf_printf(sb, "%u", dp->d_rotation_rate);
|
|
else
|
|
sbuf_printf(sb, "invalid");
|
|
sbuf_printf(sb, "</rotationrate>\n");
|
|
if (dp->d_getattr != NULL) {
|
|
buf = g_malloc(DISK_IDENT_SIZE, M_WAITOK);
|
|
bp = g_alloc_bio();
|
|
bp->bio_disk = dp;
|
|
bp->bio_attribute = "GEOM::ident";
|
|
bp->bio_length = DISK_IDENT_SIZE;
|
|
bp->bio_data = buf;
|
|
res = dp->d_getattr(bp);
|
|
sbuf_printf(sb, "%s<ident>", indent);
|
|
g_conf_printf_escaped(sb, "%s",
|
|
res == 0 ? buf: dp->d_ident);
|
|
sbuf_printf(sb, "</ident>\n");
|
|
bp->bio_attribute = "GEOM::lunid";
|
|
bp->bio_length = DISK_IDENT_SIZE;
|
|
bp->bio_data = buf;
|
|
if (dp->d_getattr(bp) == 0) {
|
|
sbuf_printf(sb, "%s<lunid>", indent);
|
|
g_conf_printf_escaped(sb, "%s", buf);
|
|
sbuf_printf(sb, "</lunid>\n");
|
|
}
|
|
bp->bio_attribute = "GEOM::lunname";
|
|
bp->bio_length = DISK_IDENT_SIZE;
|
|
bp->bio_data = buf;
|
|
if (dp->d_getattr(bp) == 0) {
|
|
sbuf_printf(sb, "%s<lunname>", indent);
|
|
g_conf_printf_escaped(sb, "%s", buf);
|
|
sbuf_printf(sb, "</lunname>\n");
|
|
}
|
|
g_destroy_bio(bp);
|
|
g_free(buf);
|
|
} else {
|
|
sbuf_printf(sb, "%s<ident>", indent);
|
|
g_conf_printf_escaped(sb, "%s", dp->d_ident);
|
|
sbuf_printf(sb, "</ident>\n");
|
|
}
|
|
sbuf_printf(sb, "%s<descr>", indent);
|
|
g_conf_printf_escaped(sb, "%s", dp->d_descr);
|
|
sbuf_printf(sb, "</descr>\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
g_disk_resize(void *ptr, int flag)
|
|
{
|
|
struct disk *dp;
|
|
struct g_geom *gp;
|
|
struct g_provider *pp;
|
|
|
|
if (flag == EV_CANCEL)
|
|
return;
|
|
g_topology_assert();
|
|
|
|
dp = ptr;
|
|
gp = dp->d_geom;
|
|
|
|
if (dp->d_destroyed || gp == NULL)
|
|
return;
|
|
|
|
LIST_FOREACH(pp, &gp->provider, provider) {
|
|
if (pp->sectorsize != 0 &&
|
|
pp->sectorsize != dp->d_sectorsize)
|
|
g_wither_provider(pp, ENXIO);
|
|
else
|
|
g_resize_provider(pp, dp->d_mediasize);
|
|
}
|
|
}
|
|
|
|
static void
|
|
g_disk_create(void *arg, int flag)
|
|
{
|
|
struct g_geom *gp;
|
|
struct g_provider *pp;
|
|
struct disk *dp;
|
|
struct g_disk_softc *sc;
|
|
char tmpstr[80];
|
|
|
|
if (flag == EV_CANCEL)
|
|
return;
|
|
g_topology_assert();
|
|
dp = arg;
|
|
sc = g_malloc(sizeof(*sc), M_WAITOK | M_ZERO);
|
|
mtx_init(&sc->start_mtx, "g_disk_start", NULL, MTX_DEF);
|
|
mtx_init(&sc->done_mtx, "g_disk_done", NULL, MTX_DEF);
|
|
sc->dp = dp;
|
|
gp = g_new_geomf(&g_disk_class, "%s%d", dp->d_name, dp->d_unit);
|
|
gp->softc = sc;
|
|
pp = g_new_providerf(gp, "%s", gp->name);
|
|
devstat_remove_entry(pp->stat);
|
|
pp->stat = NULL;
|
|
dp->d_devstat->id = pp;
|
|
pp->mediasize = dp->d_mediasize;
|
|
pp->sectorsize = dp->d_sectorsize;
|
|
pp->stripeoffset = dp->d_stripeoffset;
|
|
pp->stripesize = dp->d_stripesize;
|
|
if ((dp->d_flags & DISKFLAG_UNMAPPED_BIO) != 0)
|
|
pp->flags |= G_PF_ACCEPT_UNMAPPED;
|
|
if ((dp->d_flags & DISKFLAG_DIRECT_COMPLETION) != 0)
|
|
pp->flags |= G_PF_DIRECT_SEND;
|
|
pp->flags |= G_PF_DIRECT_RECEIVE;
|
|
if (bootverbose)
|
|
printf("GEOM: new disk %s\n", gp->name);
|
|
sysctl_ctx_init(&sc->sysctl_ctx);
|
|
snprintf(tmpstr, sizeof(tmpstr), "GEOM disk %s", gp->name);
|
|
sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx,
|
|
SYSCTL_STATIC_CHILDREN(_kern_geom_disk), OID_AUTO, gp->name,
|
|
CTLFLAG_RD, 0, tmpstr);
|
|
if (sc->sysctl_tree != NULL) {
|
|
SYSCTL_ADD_STRING(&sc->sysctl_ctx,
|
|
SYSCTL_CHILDREN(sc->sysctl_tree), OID_AUTO, "led",
|
|
CTLFLAG_RWTUN, sc->led, sizeof(sc->led),
|
|
"LED name");
|
|
}
|
|
pp->private = sc;
|
|
dp->d_geom = gp;
|
|
g_error_provider(pp, 0);
|
|
}
|
|
|
|
/*
|
|
* We get this callback after all of the consumers have gone away, and just
|
|
* before the provider is freed. If the disk driver provided a d_gone
|
|
* callback, let them know that it is okay to free resources -- they won't
|
|
* be getting any more accesses from GEOM.
|
|
*/
|
|
static void
|
|
g_disk_providergone(struct g_provider *pp)
|
|
{
|
|
struct disk *dp;
|
|
struct g_disk_softc *sc;
|
|
|
|
sc = (struct g_disk_softc *)pp->private;
|
|
dp = sc->dp;
|
|
if (dp != NULL && dp->d_gone != NULL)
|
|
dp->d_gone(dp);
|
|
if (sc->sysctl_tree != NULL) {
|
|
sysctl_ctx_free(&sc->sysctl_ctx);
|
|
sc->sysctl_tree = NULL;
|
|
}
|
|
if (sc->led[0] != 0) {
|
|
led_set(sc->led, "0");
|
|
sc->led[0] = 0;
|
|
}
|
|
pp->private = NULL;
|
|
pp->geom->softc = NULL;
|
|
mtx_destroy(&sc->done_mtx);
|
|
mtx_destroy(&sc->start_mtx);
|
|
g_free(sc);
|
|
}
|
|
|
|
static void
|
|
g_disk_destroy(void *ptr, int flag)
|
|
{
|
|
struct disk *dp;
|
|
struct g_geom *gp;
|
|
struct g_disk_softc *sc;
|
|
|
|
g_topology_assert();
|
|
dp = ptr;
|
|
gp = dp->d_geom;
|
|
if (gp != NULL) {
|
|
sc = gp->softc;
|
|
if (sc != NULL)
|
|
sc->dp = NULL;
|
|
dp->d_geom = NULL;
|
|
g_wither_geom(gp, ENXIO);
|
|
}
|
|
g_free(dp);
|
|
}
|
|
|
|
/*
|
|
* We only allow printable characters in disk ident,
|
|
* the rest is converted to 'x<HH>'.
|
|
*/
|
|
static void
|
|
g_disk_ident_adjust(char *ident, size_t size)
|
|
{
|
|
char *p, tmp[4], newid[DISK_IDENT_SIZE];
|
|
|
|
newid[0] = '\0';
|
|
for (p = ident; *p != '\0'; p++) {
|
|
if (isprint(*p)) {
|
|
tmp[0] = *p;
|
|
tmp[1] = '\0';
|
|
} else {
|
|
snprintf(tmp, sizeof(tmp), "x%02hhx",
|
|
*(unsigned char *)p);
|
|
}
|
|
if (strlcat(newid, tmp, sizeof(newid)) >= sizeof(newid))
|
|
break;
|
|
}
|
|
bzero(ident, size);
|
|
strlcpy(ident, newid, size);
|
|
}
|
|
|
|
struct disk *
|
|
disk_alloc(void)
|
|
{
|
|
|
|
return (g_malloc(sizeof(struct disk), M_WAITOK | M_ZERO));
|
|
}
|
|
|
|
void
|
|
disk_create(struct disk *dp, int version)
|
|
{
|
|
|
|
if (version != DISK_VERSION) {
|
|
printf("WARNING: Attempt to add disk %s%d %s",
|
|
dp->d_name, dp->d_unit,
|
|
" using incompatible ABI version of disk(9)\n");
|
|
printf("WARNING: Ignoring disk %s%d\n",
|
|
dp->d_name, dp->d_unit);
|
|
return;
|
|
}
|
|
if (dp->d_flags & DISKFLAG_RESERVED) {
|
|
printf("WARNING: Attempt to add non-MPSAFE disk %s%d\n",
|
|
dp->d_name, dp->d_unit);
|
|
printf("WARNING: Ignoring disk %s%d\n",
|
|
dp->d_name, dp->d_unit);
|
|
return;
|
|
}
|
|
KASSERT(dp->d_strategy != NULL, ("disk_create need d_strategy"));
|
|
KASSERT(dp->d_name != NULL, ("disk_create need d_name"));
|
|
KASSERT(*dp->d_name != 0, ("disk_create need d_name"));
|
|
KASSERT(strlen(dp->d_name) < SPECNAMELEN - 4, ("disk name too long"));
|
|
if (dp->d_devstat == NULL)
|
|
dp->d_devstat = devstat_new_entry(dp->d_name, dp->d_unit,
|
|
dp->d_sectorsize, DEVSTAT_ALL_SUPPORTED,
|
|
DEVSTAT_TYPE_DIRECT, DEVSTAT_PRIORITY_MAX);
|
|
dp->d_geom = NULL;
|
|
g_disk_ident_adjust(dp->d_ident, sizeof(dp->d_ident));
|
|
g_post_event(g_disk_create, dp, M_WAITOK, dp, NULL);
|
|
}
|
|
|
|
void
|
|
disk_destroy(struct disk *dp)
|
|
{
|
|
|
|
g_cancel_event(dp);
|
|
dp->d_destroyed = 1;
|
|
if (dp->d_devstat != NULL)
|
|
devstat_remove_entry(dp->d_devstat);
|
|
g_post_event(g_disk_destroy, dp, M_WAITOK, NULL);
|
|
}
|
|
|
|
void
|
|
disk_gone(struct disk *dp)
|
|
{
|
|
struct g_geom *gp;
|
|
struct g_provider *pp;
|
|
|
|
gp = dp->d_geom;
|
|
if (gp != NULL) {
|
|
pp = LIST_FIRST(&gp->provider);
|
|
if (pp != NULL) {
|
|
KASSERT(LIST_NEXT(pp, provider) == NULL,
|
|
("geom %p has more than one provider", gp));
|
|
g_wither_provider(pp, ENXIO);
|
|
}
|
|
}
|
|
}
|
|
|
|
void
|
|
disk_attr_changed(struct disk *dp, const char *attr, int flag)
|
|
{
|
|
struct g_geom *gp;
|
|
struct g_provider *pp;
|
|
char devnamebuf[128];
|
|
|
|
gp = dp->d_geom;
|
|
if (gp != NULL)
|
|
LIST_FOREACH(pp, &gp->provider, provider)
|
|
(void)g_attr_changed(pp, attr, flag);
|
|
snprintf(devnamebuf, sizeof(devnamebuf), "devname=%s%d", dp->d_name,
|
|
dp->d_unit);
|
|
devctl_notify("GEOM", "disk", attr, devnamebuf);
|
|
}
|
|
|
|
void
|
|
disk_media_changed(struct disk *dp, int flag)
|
|
{
|
|
struct g_geom *gp;
|
|
struct g_provider *pp;
|
|
|
|
gp = dp->d_geom;
|
|
if (gp != NULL) {
|
|
pp = LIST_FIRST(&gp->provider);
|
|
if (pp != NULL) {
|
|
KASSERT(LIST_NEXT(pp, provider) == NULL,
|
|
("geom %p has more than one provider", gp));
|
|
g_media_changed(pp, flag);
|
|
}
|
|
}
|
|
}
|
|
|
|
void
|
|
disk_media_gone(struct disk *dp, int flag)
|
|
{
|
|
struct g_geom *gp;
|
|
struct g_provider *pp;
|
|
|
|
gp = dp->d_geom;
|
|
if (gp != NULL) {
|
|
pp = LIST_FIRST(&gp->provider);
|
|
if (pp != NULL) {
|
|
KASSERT(LIST_NEXT(pp, provider) == NULL,
|
|
("geom %p has more than one provider", gp));
|
|
g_media_gone(pp, flag);
|
|
}
|
|
}
|
|
}
|
|
|
|
int
|
|
disk_resize(struct disk *dp, int flag)
|
|
{
|
|
|
|
if (dp->d_destroyed || dp->d_geom == NULL)
|
|
return (0);
|
|
|
|
return (g_post_event(g_disk_resize, dp, flag, NULL));
|
|
}
|
|
|
|
static void
|
|
g_kern_disks(void *p, int flag __unused)
|
|
{
|
|
struct sbuf *sb;
|
|
struct g_geom *gp;
|
|
char *sp;
|
|
|
|
sb = p;
|
|
sp = "";
|
|
g_topology_assert();
|
|
LIST_FOREACH(gp, &g_disk_class.geom, geom) {
|
|
sbuf_printf(sb, "%s%s", sp, gp->name);
|
|
sp = " ";
|
|
}
|
|
sbuf_finish(sb);
|
|
}
|
|
|
|
static int
|
|
sysctl_disks(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
struct sbuf *sb;
|
|
|
|
sb = sbuf_new_auto();
|
|
g_waitfor_event(g_kern_disks, sb, M_WAITOK, NULL);
|
|
error = SYSCTL_OUT(req, sbuf_data(sb), sbuf_len(sb) + 1);
|
|
sbuf_delete(sb);
|
|
return error;
|
|
}
|
|
|
|
SYSCTL_PROC(_kern, OID_AUTO, disks,
|
|
CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0,
|
|
sysctl_disks, "A", "names of available disks");
|