freebsd-skq/sys/mips/include/vmparam.h
jchandra 10dfd55de4 Redo the page table page allocation on MIPS, as suggested by
alc@.

The UMA zone based allocation is replaced by a scheme that creates
a new free page list for the KSEG0 region, and a new function
in sys/vm that allocates pages from a specific free page list.

This also fixes a race condition introduced by the UMA based page table
page allocation code. Dropping the page queue and pmap locks before
the call to uma_zfree, and re-acquiring them afterwards  will introduce
a race condtion(noted by alc@).

The changes are :
- Revert the earlier changes in MIPS pmap.c that added UMA zone for
page table pages.
- Add a new freelist VM_FREELIST_HIGHMEM to MIPS vmparam.h for memory that
is not directly mapped (in 32bit kernel). Normal page allocations will first
try the HIGHMEM freelist and then the default(direct mapped) freelist.
- Add a new function 'vm_page_t vm_page_alloc_freelist(int flind, int
order, int req)' to vm/vm_page.c to allocate a page from a specified
freelist. The MIPS page table pages will be allocated using this function
from the freelist containing direct mapped pages.
- Move the page initialization code from vm_phys_alloc_contig() to a
new function vm_page_alloc_init(), and use this function to initialize
pages in vm_page_alloc_freelist() too.
- Split the  function vm_phys_alloc_pages(int pool, int order) to create
vm_phys_alloc_freelist_pages(int flind, int pool, int order), and use
this function from both vm_page_alloc_freelist() and vm_phys_alloc_pages().

Reviewed by:	alc
2010-07-21 09:27:00 +00:00

205 lines
6.4 KiB
C

/* $OpenBSD: vmparam.h,v 1.2 1998/09/15 10:50:12 pefo Exp $ */
/* $NetBSD: vmparam.h,v 1.5 1994/10/26 21:10:10 cgd Exp $ */
/*
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department and Ralph Campbell.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah Hdr: vmparam.h 1.16 91/01/18
* @(#)vmparam.h 8.2 (Berkeley) 4/22/94
* JNPR: vmparam.h,v 1.3.2.1 2007/09/10 06:01:28 girish
* $FreeBSD$
*/
#ifndef _MACHINE_VMPARAM_H_
#define _MACHINE_VMPARAM_H_
/*
* Machine dependent constants mips processors.
*/
/*
* USRTEXT is the start of the user text/data space, while USRSTACK
* is the top (end) of the user stack.
*/
#define USRTEXT (1*PAGE_SIZE)
/*
* USRSTACK needs to start a little below 0x8000000 because the R8000
* and some QED CPUs perform some virtual address checks before the
* offset is calculated.
*/
#define USRSTACK 0x7ffff000 /* Start of user stack */
/*
* Virtual memory related constants, all in bytes
*/
#ifndef MAXTSIZ
#define MAXTSIZ (128UL*1024*1024) /* max text size */
#endif
#ifndef DFLDSIZ
#define DFLDSIZ (128UL*1024*1024) /* initial data size limit */
#endif
#ifndef MAXDSIZ
#define MAXDSIZ (1*1024UL*1024*1024) /* max data size */
#endif
#ifndef DFLSSIZ
#define DFLSSIZ (8UL*1024*1024) /* initial stack size limit */
#endif
#ifndef MAXSSIZ
#define MAXSSIZ (64UL*1024*1024) /* max stack size */
#endif
#ifndef SGROWSIZ
#define SGROWSIZ (128UL*1024) /* amount to grow stack */
#endif
/*
* The time for a process to be blocked before being very swappable.
* This is a number of seconds which the system takes as being a non-trivial
* amount of real time. You probably shouldn't change this;
* it is used in subtle ways (fractions and multiples of it are, that is, like
* half of a ``long time'', almost a long time, etc.)
* It is related to human patience and other factors which don't really
* change over time.
*/
#define MAXSLP 20
/*
* Mach derived constants
*/
/* user/kernel map constants */
#define VM_MIN_ADDRESS ((vm_offset_t)0x00000000)
#define VM_MAX_ADDRESS ((vm_offset_t)(intptr_t)(int32_t)0xffffffff)
#define VM_MINUSER_ADDRESS ((vm_offset_t)0x00000000)
#define VM_MAX_MMAP_ADDR VM_MAXUSER_ADDRESS
#if defined(__mips_n64)
#define VM_MAXUSER_ADDRESS (VM_MINUSER_ADDRESS + (NPDEPG * NPTEPG * PAGE_SIZE))
#define VM_MIN_KERNEL_ADDRESS ((vm_offset_t)0xc000000000000000)
#define VM_MAX_KERNEL_ADDRESS (VM_MIN_KERNEL_ADDRESS + (NPDEPG * NPTEPG * PAGE_SIZE))
#else
#define VM_MAXUSER_ADDRESS ((vm_offset_t)0x80000000)
#define VM_MIN_KERNEL_ADDRESS ((vm_offset_t)0xC0000000)
#define VM_MAX_KERNEL_ADDRESS ((vm_offset_t)0xFFFFC000)
#endif
#if 0
#define KERNBASE (VM_MIN_KERNEL_ADDRESS)
#else
#define KERNBASE ((vm_offset_t)(intptr_t)(int32_t)0x80000000)
#endif
/*
* Disable superpage reservations. (not sure if this is right
* I copied it from ARM)
*/
#ifndef VM_NRESERVLEVEL
#define VM_NRESERVLEVEL 0
#endif
/* virtual sizes (bytes) for various kernel submaps */
#ifndef VM_KMEM_SIZE
#define VM_KMEM_SIZE (12 * 1024 * 1024)
#endif
/*
* How many physical pages per KVA page allocated.
* min(max(VM_KMEM_SIZE, Physical memory/VM_KMEM_SIZE_SCALE), VM_KMEM_SIZE_MAX)
* is the total KVA space allocated for kmem_map.
*/
#ifndef VM_KMEM_SIZE_SCALE
#define VM_KMEM_SIZE_SCALE (3)
#endif
/*
* Ceiling on amount of kmem_map kva space.
*/
#ifndef VM_KMEM_SIZE_MAX
#define VM_KMEM_SIZE_MAX (200 * 1024 * 1024)
#endif
/* initial pagein size of beginning of executable file */
#ifndef VM_INITIAL_PAGEIN
#define VM_INITIAL_PAGEIN 16
#endif
/*
* max number of non-contig chunks of physical RAM you can have
*/
#define VM_PHYSSEG_MAX 32
/*
* The physical address space is sparsely populated.
*/
#define VM_PHYSSEG_SPARSE
/*
* Create three free page pools: VM_FREEPOOL_DEFAULT is the default pool
* from which physical pages are allocated and VM_FREEPOOL_DIRECT is
* the pool from which physical pages for small UMA objects are
* allocated.
*/
#define VM_NFREEPOOL 3
#define VM_FREEPOOL_CACHE 2
#define VM_FREEPOOL_DEFAULT 0
#define VM_FREEPOOL_DIRECT 1
/*
* we support 2 free lists:
*
* - DEFAULT for direct mapped (KSEG0) pages.
* Note: This usage of DEFAULT may be misleading because we use
* DEFAULT for allocating direct mapped pages. The normal page
* allocations use HIGHMEM if available, and then DEFAULT.
* - HIGHMEM for other pages
*/
#ifdef __mips_n64
#define VM_NFREELIST 1
#define VM_FREELIST_DEFAULT 0
#else
#define VM_NFREELIST 2
#define VM_FREELIST_DEFAULT 1
#define VM_FREELIST_HIGHMEM 0
#define VM_FREELIST_DIRECT VM_FREELIST_DEFAULT
#define VM_HIGHMEM_ADDRESS ((vm_paddr_t)0x20000000)
#endif
/*
* The largest allocation size is 1MB.
*/
#define VM_NFREEORDER 9
#define SEGSHIFT 22 /* LOG2(NBSEG) */
#define NBSEG (1 << SEGSHIFT) /* bytes/segment */
#define SEGOFSET (NBSEG-1) /* byte offset into segment */
#endif /* !_MACHINE_VMPARAM_H_ */