260cc4834d
using 512 byte blocks). cam_ccb.h: Bump up volume_size and cylinders in ccb_calc_geometry to 64 bits and 32 bits respectively, so we can hold larger device sizes. cylinders would overflow at about 500GB. Bump CAM_VERSION for this change. Note that this will require a recompile of all applications that talk to the pass(4) driver. scsi_all.c: Add descriptions for READ/WRITE(16), update READ/WRITE(12) descriptions, add descriptions for SERVICE ACTION IN/OUT. Add a new function, scsi_read_capacity_16(), that issues the read capacity service action. (Necessary for arrays larger than 2^32 sectors.) Update scsi_read_write() to use a 64 bit LBA and issue READ(16) or WRITE(16) if necessary. NOTE the API change. This should be largely transparnet to most userland applications at compile time, but will break binary compatibility. The CAM_VERSION bump, above, also serves the purpose of forcing a recompile for any applications that talk to CAM. scsi_all.h: Add 16 byte READ/WRITE structures, structures for 16 byte READ CAPACITY/SERVICE ACTION IN. Add scsi_u64to8b() and scsi_8btou64. scsi_da.c: The da(4) driver probe now has two stages for devices larger than 2TB. If a standard READ CAPACITY(10) returns 0xffffffff, we issue the 16 byte version of read capacity to determine the true array capacity. We also do the same thing in daopen() -- use the 16 byte read capacity if the device is large enough. The sysctl/loader code has also been updated to accept 16 bytes as a minimum command size.
985 lines
30 KiB
C
985 lines
30 KiB
C
/*
|
|
* Data structures and definitions for CAM Control Blocks (CCBs).
|
|
*
|
|
* Copyright (c) 1997, 1998 Justin T. Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _CAM_CAM_CCB_H
|
|
#define _CAM_CAM_CCB_H 1
|
|
|
|
#include <sys/queue.h>
|
|
#include <sys/cdefs.h>
|
|
#include <sys/time.h>
|
|
#ifdef CAM_NEW_TRAN_CODE
|
|
#include <sys/limits.h>
|
|
#endif /* CAM_NEW_TRAN_CODE */
|
|
#ifndef _KERNEL
|
|
#include <sys/callout.h>
|
|
#endif
|
|
#include <cam/cam_debug.h>
|
|
#include <cam/scsi/scsi_all.h>
|
|
|
|
|
|
/* General allocation length definitions for CCB structures */
|
|
#define IOCDBLEN CAM_MAX_CDBLEN /* Space for CDB bytes/pointer */
|
|
#define VUHBALEN 14 /* Vendor Unique HBA length */
|
|
#define SIM_IDLEN 16 /* ASCII string len for SIM ID */
|
|
#define HBA_IDLEN 16 /* ASCII string len for HBA ID */
|
|
#define DEV_IDLEN 16 /* ASCII string len for device names */
|
|
#define CCB_PERIPH_PRIV_SIZE 2 /* size of peripheral private area */
|
|
#define CCB_SIM_PRIV_SIZE 2 /* size of sim private area */
|
|
|
|
/* Struct definitions for CAM control blocks */
|
|
|
|
/* Common CCB header */
|
|
/* CAM CCB flags */
|
|
typedef enum {
|
|
CAM_CDB_POINTER = 0x00000001,/* The CDB field is a pointer */
|
|
CAM_QUEUE_ENABLE = 0x00000002,/* SIM queue actions are enabled */
|
|
CAM_CDB_LINKED = 0x00000004,/* CCB contains a linked CDB */
|
|
CAM_NEGOTIATE = 0x00000008,/*
|
|
* Perform transport negotiation
|
|
* with this command.
|
|
*/
|
|
CAM_SCATTER_VALID = 0x00000010,/* Scatter/gather list is valid */
|
|
CAM_DIS_AUTOSENSE = 0x00000020,/* Disable autosense feature */
|
|
CAM_DIR_RESV = 0x00000000,/* Data direction (00:reserved) */
|
|
CAM_DIR_IN = 0x00000040,/* Data direction (01:DATA IN) */
|
|
CAM_DIR_OUT = 0x00000080,/* Data direction (10:DATA OUT) */
|
|
CAM_DIR_NONE = 0x000000C0,/* Data direction (11:no data) */
|
|
CAM_DIR_MASK = 0x000000C0,/* Data direction Mask */
|
|
CAM_SOFT_RST_OP = 0x00000100,/* Use Soft reset alternative */
|
|
CAM_ENG_SYNC = 0x00000200,/* Flush resid bytes on complete */
|
|
CAM_DEV_QFRZDIS = 0x00000400,/* Disable DEV Q freezing */
|
|
CAM_DEV_QFREEZE = 0x00000800,/* Freeze DEV Q on execution */
|
|
CAM_HIGH_POWER = 0x00001000,/* Command takes a lot of power */
|
|
CAM_SENSE_PTR = 0x00002000,/* Sense data is a pointer */
|
|
CAM_SENSE_PHYS = 0x00004000,/* Sense pointer is physical addr*/
|
|
CAM_TAG_ACTION_VALID = 0x00008000,/* Use the tag action in this ccb*/
|
|
CAM_PASS_ERR_RECOVER = 0x00010000,/* Pass driver does err. recovery*/
|
|
CAM_DIS_DISCONNECT = 0x00020000,/* Disable disconnect */
|
|
CAM_SG_LIST_PHYS = 0x00040000,/* SG list has physical addrs. */
|
|
CAM_MSG_BUF_PHYS = 0x00080000,/* Message buffer ptr is physical*/
|
|
CAM_SNS_BUF_PHYS = 0x00100000,/* Autosense data ptr is physical*/
|
|
CAM_DATA_PHYS = 0x00200000,/* SG/Buffer data ptrs are phys. */
|
|
CAM_CDB_PHYS = 0x00400000,/* CDB poiner is physical */
|
|
CAM_ENG_SGLIST = 0x00800000,/* SG list is for the HBA engine */
|
|
|
|
/* Phase cognizant mode flags */
|
|
CAM_DIS_AUTOSRP = 0x01000000,/* Disable autosave/restore ptrs */
|
|
CAM_DIS_AUTODISC = 0x02000000,/* Disable auto disconnect */
|
|
CAM_TGT_CCB_AVAIL = 0x04000000,/* Target CCB available */
|
|
CAM_TGT_PHASE_MODE = 0x08000000,/* The SIM runs in phase mode */
|
|
CAM_MSGB_VALID = 0x10000000,/* Message buffer valid */
|
|
CAM_STATUS_VALID = 0x20000000,/* Status buffer valid */
|
|
CAM_DATAB_VALID = 0x40000000,/* Data buffer valid */
|
|
|
|
/* Host target Mode flags */
|
|
CAM_SEND_SENSE = 0x08000000,/* Send sense data with status */
|
|
CAM_TERM_IO = 0x10000000,/* Terminate I/O Message sup. */
|
|
CAM_DISCONNECT = 0x20000000,/* Disconnects are mandatory */
|
|
CAM_SEND_STATUS = 0x40000000 /* Send status after data phase */
|
|
} ccb_flags;
|
|
|
|
/* XPT Opcodes for xpt_action */
|
|
typedef enum {
|
|
/* Function code flags are bits greater than 0xff */
|
|
XPT_FC_QUEUED = 0x100,
|
|
/* Non-immediate function code */
|
|
XPT_FC_USER_CCB = 0x200,
|
|
XPT_FC_XPT_ONLY = 0x400,
|
|
/* Only for the transport layer device */
|
|
XPT_FC_DEV_QUEUED = 0x800 | XPT_FC_QUEUED,
|
|
/* Passes through the device queues */
|
|
/* Common function commands: 0x00->0x0F */
|
|
XPT_NOOP = 0x00,
|
|
/* Execute Nothing */
|
|
XPT_SCSI_IO = 0x01 | XPT_FC_DEV_QUEUED,
|
|
/* Execute the requested I/O operation */
|
|
XPT_GDEV_TYPE = 0x02,
|
|
/* Get type information for specified device */
|
|
XPT_GDEVLIST = 0x03,
|
|
/* Get a list of peripheral devices */
|
|
XPT_PATH_INQ = 0x04,
|
|
/* Path routing inquiry */
|
|
XPT_REL_SIMQ = 0x05,
|
|
/* Release a frozen SIM queue */
|
|
XPT_SASYNC_CB = 0x06,
|
|
/* Set Asynchronous Callback Parameters */
|
|
XPT_SDEV_TYPE = 0x07,
|
|
/* Set device type information */
|
|
XPT_SCAN_BUS = 0x08 | XPT_FC_QUEUED | XPT_FC_USER_CCB
|
|
| XPT_FC_XPT_ONLY,
|
|
/* (Re)Scan the SCSI Bus */
|
|
XPT_DEV_MATCH = 0x09 | XPT_FC_XPT_ONLY,
|
|
/* Get EDT entries matching the given pattern */
|
|
XPT_DEBUG = 0x0a,
|
|
/* Turn on debugging for a bus, target or lun */
|
|
XPT_PATH_STATS = 0x0b,
|
|
/* Path statistics (error counts, etc.) */
|
|
XPT_GDEV_STATS = 0x0c,
|
|
/* Device statistics (error counts, etc.) */
|
|
/* SCSI Control Functions: 0x10->0x1F */
|
|
XPT_ABORT = 0x10,
|
|
/* Abort the specified CCB */
|
|
XPT_RESET_BUS = 0x11 | XPT_FC_XPT_ONLY,
|
|
/* Reset the specified SCSI bus */
|
|
XPT_RESET_DEV = 0x12 | XPT_FC_DEV_QUEUED,
|
|
/* Bus Device Reset the specified SCSI device */
|
|
XPT_TERM_IO = 0x13,
|
|
/* Terminate the I/O process */
|
|
XPT_SCAN_LUN = 0x14 | XPT_FC_QUEUED | XPT_FC_USER_CCB
|
|
| XPT_FC_XPT_ONLY,
|
|
/* Scan Logical Unit */
|
|
XPT_GET_TRAN_SETTINGS = 0x15,
|
|
/*
|
|
* Get default/user transfer settings
|
|
* for the target
|
|
*/
|
|
XPT_SET_TRAN_SETTINGS = 0x16,
|
|
/*
|
|
* Set transfer rate/width
|
|
* negotiation settings
|
|
*/
|
|
XPT_CALC_GEOMETRY = 0x17,
|
|
/*
|
|
* Calculate the geometry parameters for
|
|
* a device give the sector size and
|
|
* volume size.
|
|
*/
|
|
|
|
/* HBA engine commands 0x20->0x2F */
|
|
XPT_ENG_INQ = 0x20 | XPT_FC_XPT_ONLY,
|
|
/* HBA engine feature inquiry */
|
|
XPT_ENG_EXEC = 0x21 | XPT_FC_DEV_QUEUED,
|
|
/* HBA execute engine request */
|
|
|
|
/* Target mode commands: 0x30->0x3F */
|
|
XPT_EN_LUN = 0x30,
|
|
/* Enable LUN as a target */
|
|
XPT_TARGET_IO = 0x31 | XPT_FC_DEV_QUEUED,
|
|
/* Execute target I/O request */
|
|
XPT_ACCEPT_TARGET_IO = 0x32 | XPT_FC_QUEUED | XPT_FC_USER_CCB,
|
|
/* Accept Host Target Mode CDB */
|
|
XPT_CONT_TARGET_IO = 0x33 | XPT_FC_DEV_QUEUED,
|
|
/* Continue Host Target I/O Connection */
|
|
XPT_IMMED_NOTIFY = 0x34 | XPT_FC_QUEUED | XPT_FC_USER_CCB,
|
|
/* Notify Host Target driver of event */
|
|
XPT_NOTIFY_ACK = 0x35,
|
|
/* Acknowledgement of event */
|
|
|
|
/* Vendor Unique codes: 0x80->0x8F */
|
|
XPT_VUNIQUE = 0x80
|
|
} xpt_opcode;
|
|
|
|
#define XPT_FC_GROUP_MASK 0xF0
|
|
#define XPT_FC_GROUP(op) ((op) & XPT_FC_GROUP_MASK)
|
|
#define XPT_FC_GROUP_COMMON 0x00
|
|
#define XPT_FC_GROUP_SCSI_CONTROL 0x10
|
|
#define XPT_FC_GROUP_HBA_ENGINE 0x20
|
|
#define XPT_FC_GROUP_TMODE 0x30
|
|
#define XPT_FC_GROUP_VENDOR_UNIQUE 0x80
|
|
|
|
#define XPT_FC_IS_DEV_QUEUED(ccb) \
|
|
(((ccb)->ccb_h.func_code & XPT_FC_DEV_QUEUED) == XPT_FC_DEV_QUEUED)
|
|
#define XPT_FC_IS_QUEUED(ccb) \
|
|
(((ccb)->ccb_h.func_code & XPT_FC_QUEUED) != 0)
|
|
|
|
#ifdef CAM_NEW_TRAN_CODE
|
|
typedef enum {
|
|
PROTO_UNKNOWN,
|
|
PROTO_UNSPECIFIED,
|
|
PROTO_SCSI, /* Small Computer System Interface */
|
|
PROTO_ATA, /* AT Attachment */
|
|
PROTO_ATAPI, /* AT Attachment Packetized Interface */
|
|
} cam_proto;
|
|
|
|
typedef enum {
|
|
XPORT_UNKNOWN,
|
|
XPORT_UNSPECIFIED,
|
|
XPORT_SPI, /* SCSI Parallel Interface */
|
|
XPORT_FC, /* Fiber Channel */
|
|
XPORT_SSA, /* Serial Storage Architecture */
|
|
XPORT_USB, /* Universal Serial Bus */
|
|
XPORT_PPB, /* Parallel Port Bus */
|
|
XPORT_ATA /* AT Attachment */
|
|
} cam_xport;
|
|
|
|
#define PROTO_VERSION_UNKNOWN (UINT_MAX - 1)
|
|
#define PROTO_VERSION_UNSPECIFIED UINT_MAX
|
|
#define XPORT_VERSION_UNKNOWN (UINT_MAX - 1)
|
|
#define XPORT_VERSION_UNSPECIFIED UINT_MAX
|
|
#endif /* CAM_NEW_TRAN_CODE */
|
|
|
|
typedef union {
|
|
LIST_ENTRY(ccb_hdr) le;
|
|
SLIST_ENTRY(ccb_hdr) sle;
|
|
TAILQ_ENTRY(ccb_hdr) tqe;
|
|
STAILQ_ENTRY(ccb_hdr) stqe;
|
|
} camq_entry;
|
|
|
|
typedef union {
|
|
void *ptr;
|
|
u_long field;
|
|
u_int8_t bytes[sizeof(void *) > sizeof(u_long)
|
|
? sizeof(void *) : sizeof(u_long)];
|
|
} ccb_priv_entry;
|
|
|
|
typedef union {
|
|
ccb_priv_entry entries[CCB_PERIPH_PRIV_SIZE];
|
|
u_int8_t bytes[CCB_PERIPH_PRIV_SIZE * sizeof(ccb_priv_entry)];
|
|
} ccb_ppriv_area;
|
|
|
|
typedef union {
|
|
ccb_priv_entry entries[CCB_SIM_PRIV_SIZE];
|
|
u_int8_t bytes[CCB_SIM_PRIV_SIZE * sizeof(ccb_priv_entry)];
|
|
} ccb_spriv_area;
|
|
|
|
struct ccb_hdr {
|
|
cam_pinfo pinfo; /* Info for priority scheduling */
|
|
camq_entry xpt_links; /* For chaining in the XPT layer */
|
|
camq_entry sim_links; /* For chaining in the SIM layer */
|
|
camq_entry periph_links;/* For chaining in the type driver */
|
|
u_int32_t retry_count;
|
|
/* Callback on completion function */
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *);
|
|
xpt_opcode func_code; /* XPT function code */
|
|
u_int32_t status; /* Status returned by CAM subsystem */
|
|
/* Compiled path for this ccb */
|
|
struct cam_path *path;
|
|
path_id_t path_id; /* Path ID for the request */
|
|
target_id_t target_id; /* Target device ID */
|
|
lun_id_t target_lun; /* Target LUN number */
|
|
u_int32_t flags;
|
|
ccb_ppriv_area periph_priv;
|
|
ccb_spriv_area sim_priv;
|
|
u_int32_t timeout; /* Timeout value */
|
|
/* Callout handle used for timeouts */
|
|
struct callout_handle timeout_ch;
|
|
};
|
|
|
|
/* Get Device Information CCB */
|
|
struct ccb_getdev {
|
|
struct ccb_hdr ccb_h;
|
|
struct scsi_inquiry_data inq_data;
|
|
u_int8_t serial_num[252];
|
|
u_int8_t reserved;
|
|
u_int8_t serial_num_len;
|
|
};
|
|
|
|
/* Device Statistics CCB */
|
|
struct ccb_getdevstats {
|
|
struct ccb_hdr ccb_h;
|
|
int dev_openings; /* Space left for more work on device*/
|
|
int dev_active; /* Transactions running on the device */
|
|
int devq_openings; /* Space left for more queued work */
|
|
int devq_queued; /* Transactions queued to be sent */
|
|
int held; /*
|
|
* CCBs held by peripheral drivers
|
|
* for this device
|
|
*/
|
|
int maxtags; /*
|
|
* Boundary conditions for number of
|
|
* tagged operations
|
|
*/
|
|
int mintags;
|
|
struct timeval last_reset; /* Time of last bus reset/loop init */
|
|
};
|
|
|
|
typedef enum {
|
|
CAM_GDEVLIST_LAST_DEVICE,
|
|
CAM_GDEVLIST_LIST_CHANGED,
|
|
CAM_GDEVLIST_MORE_DEVS,
|
|
CAM_GDEVLIST_ERROR
|
|
} ccb_getdevlist_status_e;
|
|
|
|
struct ccb_getdevlist {
|
|
struct ccb_hdr ccb_h;
|
|
char periph_name[DEV_IDLEN];
|
|
u_int32_t unit_number;
|
|
unsigned int generation;
|
|
u_int32_t index;
|
|
ccb_getdevlist_status_e status;
|
|
};
|
|
|
|
typedef enum {
|
|
PERIPH_MATCH_NONE = 0x000,
|
|
PERIPH_MATCH_PATH = 0x001,
|
|
PERIPH_MATCH_TARGET = 0x002,
|
|
PERIPH_MATCH_LUN = 0x004,
|
|
PERIPH_MATCH_NAME = 0x008,
|
|
PERIPH_MATCH_UNIT = 0x010,
|
|
PERIPH_MATCH_ANY = 0x01f
|
|
} periph_pattern_flags;
|
|
|
|
struct periph_match_pattern {
|
|
char periph_name[DEV_IDLEN];
|
|
u_int32_t unit_number;
|
|
path_id_t path_id;
|
|
target_id_t target_id;
|
|
lun_id_t target_lun;
|
|
periph_pattern_flags flags;
|
|
};
|
|
|
|
typedef enum {
|
|
DEV_MATCH_NONE = 0x000,
|
|
DEV_MATCH_PATH = 0x001,
|
|
DEV_MATCH_TARGET = 0x002,
|
|
DEV_MATCH_LUN = 0x004,
|
|
DEV_MATCH_INQUIRY = 0x008,
|
|
DEV_MATCH_ANY = 0x00f
|
|
} dev_pattern_flags;
|
|
|
|
struct device_match_pattern {
|
|
path_id_t path_id;
|
|
target_id_t target_id;
|
|
lun_id_t target_lun;
|
|
struct scsi_static_inquiry_pattern inq_pat;
|
|
dev_pattern_flags flags;
|
|
};
|
|
|
|
typedef enum {
|
|
BUS_MATCH_NONE = 0x000,
|
|
BUS_MATCH_PATH = 0x001,
|
|
BUS_MATCH_NAME = 0x002,
|
|
BUS_MATCH_UNIT = 0x004,
|
|
BUS_MATCH_BUS_ID = 0x008,
|
|
BUS_MATCH_ANY = 0x00f
|
|
} bus_pattern_flags;
|
|
|
|
struct bus_match_pattern {
|
|
path_id_t path_id;
|
|
char dev_name[DEV_IDLEN];
|
|
u_int32_t unit_number;
|
|
u_int32_t bus_id;
|
|
bus_pattern_flags flags;
|
|
};
|
|
|
|
union match_pattern {
|
|
struct periph_match_pattern periph_pattern;
|
|
struct device_match_pattern device_pattern;
|
|
struct bus_match_pattern bus_pattern;
|
|
};
|
|
|
|
typedef enum {
|
|
DEV_MATCH_PERIPH,
|
|
DEV_MATCH_DEVICE,
|
|
DEV_MATCH_BUS
|
|
} dev_match_type;
|
|
|
|
struct dev_match_pattern {
|
|
dev_match_type type;
|
|
union match_pattern pattern;
|
|
};
|
|
|
|
struct periph_match_result {
|
|
char periph_name[DEV_IDLEN];
|
|
u_int32_t unit_number;
|
|
path_id_t path_id;
|
|
target_id_t target_id;
|
|
lun_id_t target_lun;
|
|
};
|
|
|
|
typedef enum {
|
|
DEV_RESULT_NOFLAG = 0x00,
|
|
DEV_RESULT_UNCONFIGURED = 0x01
|
|
} dev_result_flags;
|
|
|
|
struct device_match_result {
|
|
path_id_t path_id;
|
|
target_id_t target_id;
|
|
lun_id_t target_lun;
|
|
struct scsi_inquiry_data inq_data;
|
|
dev_result_flags flags;
|
|
};
|
|
|
|
struct bus_match_result {
|
|
path_id_t path_id;
|
|
char dev_name[DEV_IDLEN];
|
|
u_int32_t unit_number;
|
|
u_int32_t bus_id;
|
|
};
|
|
|
|
union match_result {
|
|
struct periph_match_result periph_result;
|
|
struct device_match_result device_result;
|
|
struct bus_match_result bus_result;
|
|
};
|
|
|
|
struct dev_match_result {
|
|
dev_match_type type;
|
|
union match_result result;
|
|
};
|
|
|
|
typedef enum {
|
|
CAM_DEV_MATCH_LAST,
|
|
CAM_DEV_MATCH_MORE,
|
|
CAM_DEV_MATCH_LIST_CHANGED,
|
|
CAM_DEV_MATCH_SIZE_ERROR,
|
|
CAM_DEV_MATCH_ERROR
|
|
} ccb_dev_match_status;
|
|
|
|
typedef enum {
|
|
CAM_DEV_POS_NONE = 0x000,
|
|
CAM_DEV_POS_BUS = 0x001,
|
|
CAM_DEV_POS_TARGET = 0x002,
|
|
CAM_DEV_POS_DEVICE = 0x004,
|
|
CAM_DEV_POS_PERIPH = 0x008,
|
|
CAM_DEV_POS_PDPTR = 0x010,
|
|
CAM_DEV_POS_TYPEMASK = 0xf00,
|
|
CAM_DEV_POS_EDT = 0x100,
|
|
CAM_DEV_POS_PDRV = 0x200
|
|
} dev_pos_type;
|
|
|
|
struct ccb_dm_cookie {
|
|
void *bus;
|
|
void *target;
|
|
void *device;
|
|
void *periph;
|
|
void *pdrv;
|
|
};
|
|
|
|
struct ccb_dev_position {
|
|
u_int generations[4];
|
|
#define CAM_BUS_GENERATION 0x00
|
|
#define CAM_TARGET_GENERATION 0x01
|
|
#define CAM_DEV_GENERATION 0x02
|
|
#define CAM_PERIPH_GENERATION 0x03
|
|
dev_pos_type position_type;
|
|
struct ccb_dm_cookie cookie;
|
|
};
|
|
|
|
struct ccb_dev_match {
|
|
struct ccb_hdr ccb_h;
|
|
ccb_dev_match_status status;
|
|
u_int32_t num_patterns;
|
|
u_int32_t pattern_buf_len;
|
|
struct dev_match_pattern *patterns;
|
|
u_int32_t num_matches;
|
|
u_int32_t match_buf_len;
|
|
struct dev_match_result *matches;
|
|
struct ccb_dev_position pos;
|
|
};
|
|
|
|
/*
|
|
* Definitions for the path inquiry CCB fields.
|
|
*/
|
|
#define CAM_VERSION 0x15 /* Hex value for current version */
|
|
|
|
typedef enum {
|
|
PI_MDP_ABLE = 0x80, /* Supports MDP message */
|
|
PI_WIDE_32 = 0x40, /* Supports 32 bit wide SCSI */
|
|
PI_WIDE_16 = 0x20, /* Supports 16 bit wide SCSI */
|
|
PI_SDTR_ABLE = 0x10, /* Supports SDTR message */
|
|
PI_LINKED_CDB = 0x08, /* Supports linked CDBs */
|
|
PI_TAG_ABLE = 0x02, /* Supports tag queue messages */
|
|
PI_SOFT_RST = 0x01 /* Supports soft reset alternative */
|
|
} pi_inqflag;
|
|
|
|
typedef enum {
|
|
PIT_PROCESSOR = 0x80, /* Target mode processor mode */
|
|
PIT_PHASE = 0x40, /* Target mode phase cog. mode */
|
|
PIT_DISCONNECT = 0x20, /* Disconnects supported in target mode */
|
|
PIT_TERM_IO = 0x10, /* Terminate I/O message supported in TM */
|
|
PIT_GRP_6 = 0x08, /* Group 6 commands supported */
|
|
PIT_GRP_7 = 0x04 /* Group 7 commands supported */
|
|
} pi_tmflag;
|
|
|
|
typedef enum {
|
|
PIM_SCANHILO = 0x80, /* Bus scans from high ID to low ID */
|
|
PIM_NOREMOVE = 0x40, /* Removeable devices not included in scan */
|
|
PIM_NOINITIATOR = 0x20, /* Initiator role not supported. */
|
|
PIM_NOBUSRESET = 0x10 /* User has disabled initial BUS RESET */
|
|
} pi_miscflag;
|
|
|
|
#ifdef CAM_NEW_TRAN_CODE
|
|
/* Path Inquiry CCB */
|
|
struct ccb_pathinq_settings_spi {
|
|
u_int8_t ppr_options;
|
|
};
|
|
struct ccb_pathinq_settings_fc {
|
|
u_int64_t wwnn; /* world wide node name */
|
|
u_int64_t wwpn; /* world wide port name */
|
|
u_int32_t port; /* 24 bit port id, if known */
|
|
u_int32_t bitrate; /* Mbps */
|
|
};
|
|
#define PATHINQ_SETTINGS_SIZE 128
|
|
#endif /* CAM_NEW_TRAN_CODE */
|
|
|
|
struct ccb_pathinq {
|
|
struct ccb_hdr ccb_h;
|
|
u_int8_t version_num; /* Version number for the SIM/HBA */
|
|
u_int8_t hba_inquiry; /* Mimic of INQ byte 7 for the HBA */
|
|
u_int8_t target_sprt; /* Flags for target mode support */
|
|
u_int8_t hba_misc; /* Misc HBA features */
|
|
u_int16_t hba_eng_cnt; /* HBA engine count */
|
|
/* Vendor Unique capabilities */
|
|
u_int8_t vuhba_flags[VUHBALEN];
|
|
u_int32_t max_target; /* Maximum supported Target */
|
|
u_int32_t max_lun; /* Maximum supported Lun */
|
|
u_int32_t async_flags; /* Installed Async handlers */
|
|
path_id_t hpath_id; /* Highest Path ID in the subsystem */
|
|
target_id_t initiator_id; /* ID of the HBA on the SCSI bus */
|
|
char sim_vid[SIM_IDLEN]; /* Vendor ID of the SIM */
|
|
char hba_vid[HBA_IDLEN]; /* Vendor ID of the HBA */
|
|
char dev_name[DEV_IDLEN];/* Device name for SIM */
|
|
u_int32_t unit_number; /* Unit number for SIM */
|
|
u_int32_t bus_id; /* Bus ID for SIM */
|
|
u_int32_t base_transfer_speed;/* Base bus speed in KB/sec */
|
|
#ifdef CAM_NEW_TRAN_CODE
|
|
cam_proto protocol;
|
|
u_int protocol_version;
|
|
cam_xport transport;
|
|
u_int transport_version;
|
|
union {
|
|
struct ccb_pathinq_settings_spi spi;
|
|
struct ccb_pathinq_settings_fc fc;
|
|
char ccb_pathinq_settings_opaque[PATHINQ_SETTINGS_SIZE];
|
|
} xport_specific;
|
|
#endif /* CAM_NEW_TRAN_CODE */
|
|
};
|
|
|
|
/* Path Statistics CCB */
|
|
struct ccb_pathstats {
|
|
struct ccb_hdr ccb_h;
|
|
struct timeval last_reset; /* Time of last bus reset/loop init */
|
|
};
|
|
|
|
typedef union {
|
|
u_int8_t *sense_ptr; /*
|
|
* Pointer to storage
|
|
* for sense information
|
|
*/
|
|
/* Storage Area for sense information */
|
|
struct scsi_sense_data sense_buf;
|
|
} sense_t;
|
|
|
|
typedef union {
|
|
u_int8_t *cdb_ptr; /* Pointer to the CDB bytes to send */
|
|
/* Area for the CDB send */
|
|
u_int8_t cdb_bytes[IOCDBLEN];
|
|
} cdb_t;
|
|
|
|
/*
|
|
* SCSI I/O Request CCB used for the XPT_SCSI_IO and XPT_CONT_TARGET_IO
|
|
* function codes.
|
|
*/
|
|
struct ccb_scsiio {
|
|
struct ccb_hdr ccb_h;
|
|
union ccb *next_ccb; /* Ptr for next CCB for action */
|
|
u_int8_t *req_map; /* Ptr to mapping info */
|
|
u_int8_t *data_ptr; /* Ptr to the data buf/SG list */
|
|
u_int32_t dxfer_len; /* Data transfer length */
|
|
/* Autosense storage */
|
|
struct scsi_sense_data sense_data;
|
|
u_int8_t sense_len; /* Number of bytes to autosense */
|
|
u_int8_t cdb_len; /* Number of bytes for the CDB */
|
|
u_int16_t sglist_cnt; /* Number of SG list entries */
|
|
u_int8_t scsi_status; /* Returned SCSI status */
|
|
u_int8_t sense_resid; /* Autosense resid length: 2's comp */
|
|
u_int32_t resid; /* Transfer residual length: 2's comp */
|
|
cdb_t cdb_io; /* Union for CDB bytes/pointer */
|
|
u_int8_t *msg_ptr; /* Pointer to the message buffer */
|
|
u_int16_t msg_len; /* Number of bytes for the Message */
|
|
u_int8_t tag_action; /* What to do for tag queueing */
|
|
/*
|
|
* The tag action should be either the define below (to send a
|
|
* non-tagged transaction) or one of the defined scsi tag messages
|
|
* from scsi_message.h.
|
|
*/
|
|
#define CAM_TAG_ACTION_NONE 0x00
|
|
u_int tag_id; /* tag id from initator (target mode) */
|
|
u_int init_id; /* initiator id of who selected */
|
|
};
|
|
|
|
struct ccb_accept_tio {
|
|
struct ccb_hdr ccb_h;
|
|
cdb_t cdb_io; /* Union for CDB bytes/pointer */
|
|
u_int8_t cdb_len; /* Number of bytes for the CDB */
|
|
u_int8_t tag_action; /* What to do for tag queueing */
|
|
u_int8_t sense_len; /* Number of bytes of Sense Data */
|
|
u_int tag_id; /* tag id from initator (target mode) */
|
|
u_int init_id; /* initiator id of who selected */
|
|
struct scsi_sense_data sense_data;
|
|
};
|
|
|
|
/* Release SIM Queue */
|
|
struct ccb_relsim {
|
|
struct ccb_hdr ccb_h;
|
|
u_int32_t release_flags;
|
|
#define RELSIM_ADJUST_OPENINGS 0x01
|
|
#define RELSIM_RELEASE_AFTER_TIMEOUT 0x02
|
|
#define RELSIM_RELEASE_AFTER_CMDCMPLT 0x04
|
|
#define RELSIM_RELEASE_AFTER_QEMPTY 0x08
|
|
u_int32_t openings;
|
|
u_int32_t release_timeout;
|
|
u_int32_t qfrozen_cnt;
|
|
};
|
|
|
|
/*
|
|
* Definitions for the asynchronous callback CCB fields.
|
|
*/
|
|
typedef enum {
|
|
AC_GETDEV_CHANGED = 0x800,/* Getdev info might have changed */
|
|
AC_INQ_CHANGED = 0x400,/* Inquiry info might have changed */
|
|
AC_TRANSFER_NEG = 0x200,/* New transfer settings in effect */
|
|
AC_LOST_DEVICE = 0x100,/* A device went away */
|
|
AC_FOUND_DEVICE = 0x080,/* A new device was found */
|
|
AC_PATH_DEREGISTERED = 0x040,/* A path has de-registered */
|
|
AC_PATH_REGISTERED = 0x020,/* A new path has been registered */
|
|
AC_SENT_BDR = 0x010,/* A BDR message was sent to target */
|
|
AC_SCSI_AEN = 0x008,/* A SCSI AEN has been received */
|
|
AC_UNSOL_RESEL = 0x002,/* Unsolicited reselection occurred */
|
|
AC_BUS_RESET = 0x001 /* A SCSI bus reset occurred */
|
|
} ac_code;
|
|
|
|
typedef void ac_callback_t (void *softc, u_int32_t code,
|
|
struct cam_path *path, void *args);
|
|
|
|
/* Set Asynchronous Callback CCB */
|
|
struct ccb_setasync {
|
|
struct ccb_hdr ccb_h;
|
|
u_int32_t event_enable; /* Async Event enables */
|
|
ac_callback_t *callback;
|
|
void *callback_arg;
|
|
};
|
|
|
|
/* Set Device Type CCB */
|
|
struct ccb_setdev {
|
|
struct ccb_hdr ccb_h;
|
|
u_int8_t dev_type; /* Value for dev type field in EDT */
|
|
};
|
|
|
|
/* SCSI Control Functions */
|
|
|
|
/* Abort XPT request CCB */
|
|
struct ccb_abort {
|
|
struct ccb_hdr ccb_h;
|
|
union ccb *abort_ccb; /* Pointer to CCB to abort */
|
|
};
|
|
|
|
/* Reset SCSI Bus CCB */
|
|
struct ccb_resetbus {
|
|
struct ccb_hdr ccb_h;
|
|
};
|
|
|
|
/* Reset SCSI Device CCB */
|
|
struct ccb_resetdev {
|
|
struct ccb_hdr ccb_h;
|
|
};
|
|
|
|
/* Terminate I/O Process Request CCB */
|
|
struct ccb_termio {
|
|
struct ccb_hdr ccb_h;
|
|
union ccb *termio_ccb; /* Pointer to CCB to terminate */
|
|
};
|
|
|
|
#ifndef CAM_NEW_TRAN_CODE
|
|
/* Get/Set transfer rate/width/disconnection/tag queueing settings */
|
|
struct ccb_trans_settings {
|
|
struct ccb_hdr ccb_h;
|
|
u_int valid; /* Which fields to honor */
|
|
#define CCB_TRANS_SYNC_RATE_VALID 0x01
|
|
#define CCB_TRANS_SYNC_OFFSET_VALID 0x02
|
|
#define CCB_TRANS_BUS_WIDTH_VALID 0x04
|
|
#define CCB_TRANS_DISC_VALID 0x08
|
|
#define CCB_TRANS_TQ_VALID 0x10
|
|
u_int flags;
|
|
#define CCB_TRANS_CURRENT_SETTINGS 0x01
|
|
#define CCB_TRANS_USER_SETTINGS 0x02
|
|
#define CCB_TRANS_DISC_ENB 0x04
|
|
#define CCB_TRANS_TAG_ENB 0x08
|
|
u_int sync_period;
|
|
u_int sync_offset;
|
|
u_int bus_width;
|
|
};
|
|
|
|
#else /* CAM_NEW_TRAN_CODE */
|
|
typedef enum {
|
|
CTS_TYPE_CURRENT_SETTINGS,
|
|
CTS_TYPE_USER_SETTINGS
|
|
} cts_type;
|
|
|
|
struct ccb_trans_settings_scsi
|
|
{
|
|
u_int valid; /* Which fields to honor */
|
|
#define CTS_SCSI_VALID_TQ 0x01
|
|
u_int flags;
|
|
#define CTS_SCSI_FLAGS_TAG_ENB 0x01
|
|
};
|
|
|
|
struct ccb_trans_settings_spi
|
|
{
|
|
u_int valid; /* Which fields to honor */
|
|
#define CTS_SPI_VALID_SYNC_RATE 0x01
|
|
#define CTS_SPI_VALID_SYNC_OFFSET 0x02
|
|
#define CTS_SPI_VALID_BUS_WIDTH 0x04
|
|
#define CTS_SPI_VALID_DISC 0x08
|
|
#define CTS_SPI_VALID_PPR_OPTIONS 0x10
|
|
u_int flags;
|
|
#define CTS_SPI_FLAGS_DISC_ENB 0x01
|
|
#define CTS_SPI_FLAGS_TAG_ENB 0x02
|
|
u_int sync_period;
|
|
u_int sync_offset;
|
|
u_int bus_width;
|
|
u_int ppr_options;
|
|
};
|
|
|
|
struct ccb_trans_settings_fc {
|
|
u_int valid; /* Which fields to honor */
|
|
#define CTS_FC_VALID_WWNN 0x8000
|
|
#define CTS_FC_VALID_WWPN 0x4000
|
|
#define CTS_FC_VALID_PORT 0x2000
|
|
#define CTS_FC_VALID_SPEED 0x1000
|
|
u_int64_t wwnn; /* world wide node name */
|
|
u_int64_t wwpn; /* world wide port name */
|
|
u_int32_t port; /* 24 bit port id, if known */
|
|
u_int32_t bitrate; /* Mbps */
|
|
};
|
|
|
|
/* Get/Set transfer rate/width/disconnection/tag queueing settings */
|
|
struct ccb_trans_settings {
|
|
struct ccb_hdr ccb_h;
|
|
cts_type type; /* Current or User settings */
|
|
cam_proto protocol;
|
|
u_int protocol_version;
|
|
cam_xport transport;
|
|
u_int transport_version;
|
|
union {
|
|
u_int valid; /* Which fields to honor */
|
|
struct ccb_trans_settings_scsi scsi;
|
|
} proto_specific;
|
|
union {
|
|
u_int valid; /* Which fields to honor */
|
|
struct ccb_trans_settings_spi spi;
|
|
struct ccb_trans_settings_fc fc;
|
|
} xport_specific;
|
|
};
|
|
|
|
#endif /* CAM_NEW_TRAN_CODE */
|
|
|
|
/*
|
|
* Calculate the geometry parameters for a device
|
|
* give the block size and volume size in blocks.
|
|
*/
|
|
struct ccb_calc_geometry {
|
|
struct ccb_hdr ccb_h;
|
|
u_int32_t block_size;
|
|
u_int64_t volume_size;
|
|
u_int32_t cylinders;
|
|
u_int8_t heads;
|
|
u_int8_t secs_per_track;
|
|
};
|
|
|
|
/*
|
|
* Rescan the given bus, or bus/target/lun
|
|
*/
|
|
struct ccb_rescan {
|
|
struct ccb_hdr ccb_h;
|
|
cam_flags flags;
|
|
};
|
|
|
|
/*
|
|
* Turn on debugging for the given bus, bus/target, or bus/target/lun.
|
|
*/
|
|
struct ccb_debug {
|
|
struct ccb_hdr ccb_h;
|
|
cam_debug_flags flags;
|
|
};
|
|
|
|
/* Target mode structures. */
|
|
|
|
struct ccb_en_lun {
|
|
struct ccb_hdr ccb_h;
|
|
u_int16_t grp6_len; /* Group 6 VU CDB length */
|
|
u_int16_t grp7_len; /* Group 7 VU CDB length */
|
|
u_int8_t enable;
|
|
};
|
|
|
|
struct ccb_immed_notify {
|
|
struct ccb_hdr ccb_h;
|
|
struct scsi_sense_data sense_data;
|
|
u_int8_t sense_len; /* Number of bytes in sense buffer */
|
|
u_int8_t initiator_id; /* Id of initiator that selected */
|
|
u_int8_t message_args[7]; /* Message Arguments */
|
|
};
|
|
|
|
struct ccb_notify_ack {
|
|
struct ccb_hdr ccb_h;
|
|
u_int16_t seq_id; /* Sequence identifier */
|
|
u_int8_t event; /* Event flags */
|
|
};
|
|
|
|
/* HBA engine structures. */
|
|
|
|
typedef enum {
|
|
EIT_BUFFER, /* Engine type: buffer memory */
|
|
EIT_LOSSLESS, /* Engine type: lossless compression */
|
|
EIT_LOSSY, /* Engine type: lossy compression */
|
|
EIT_ENCRYPT /* Engine type: encryption */
|
|
} ei_type;
|
|
|
|
typedef enum {
|
|
EAD_VUNIQUE, /* Engine algorithm ID: vendor unique */
|
|
EAD_LZ1V1, /* Engine algorithm ID: LZ1 var.1 */
|
|
EAD_LZ2V1, /* Engine algorithm ID: LZ2 var.1 */
|
|
EAD_LZ2V2 /* Engine algorithm ID: LZ2 var.2 */
|
|
} ei_algo;
|
|
|
|
struct ccb_eng_inq {
|
|
struct ccb_hdr ccb_h;
|
|
u_int16_t eng_num; /* The engine number for this inquiry */
|
|
ei_type eng_type; /* Returned engine type */
|
|
ei_algo eng_algo; /* Returned engine algorithm type */
|
|
u_int32_t eng_memeory; /* Returned engine memory size */
|
|
};
|
|
|
|
struct ccb_eng_exec { /* This structure must match SCSIIO size */
|
|
struct ccb_hdr ccb_h;
|
|
u_int8_t *pdrv_ptr; /* Ptr used by the peripheral driver */
|
|
u_int8_t *req_map; /* Ptr for mapping info on the req. */
|
|
u_int8_t *data_ptr; /* Pointer to the data buf/SG list */
|
|
u_int32_t dxfer_len; /* Data transfer length */
|
|
u_int8_t *engdata_ptr; /* Pointer to the engine buffer data */
|
|
u_int16_t sglist_cnt; /* Num of scatter gather list entries */
|
|
u_int32_t dmax_len; /* Destination data maximum length */
|
|
u_int32_t dest_len; /* Destination data length */
|
|
int32_t src_resid; /* Source residual length: 2's comp */
|
|
u_int32_t timeout; /* Timeout value */
|
|
u_int16_t eng_num; /* Engine number for this request */
|
|
u_int16_t vu_flags; /* Vendor Unique flags */
|
|
};
|
|
|
|
/*
|
|
* Definitions for the timeout field in the SCSI I/O CCB.
|
|
*/
|
|
#define CAM_TIME_DEFAULT 0x00000000 /* Use SIM default value */
|
|
#define CAM_TIME_INFINITY 0xFFFFFFFF /* Infinite timeout */
|
|
|
|
#define CAM_SUCCESS 0 /* For signaling general success */
|
|
#define CAM_FAILURE 1 /* For signaling general failure */
|
|
|
|
#define CAM_FALSE 0
|
|
#define CAM_TRUE 1
|
|
|
|
#define XPT_CCB_INVALID -1 /* for signaling a bad CCB to free */
|
|
|
|
/*
|
|
* Union of all CCB types for kernel space allocation. This union should
|
|
* never be used for manipulating CCBs - its only use is for the allocation
|
|
* and deallocation of raw CCB space and is the return type of xpt_ccb_alloc
|
|
* and the argument to xpt_ccb_free.
|
|
*/
|
|
union ccb {
|
|
struct ccb_hdr ccb_h; /* For convenience */
|
|
struct ccb_scsiio csio;
|
|
struct ccb_getdev cgd;
|
|
struct ccb_getdevlist cgdl;
|
|
struct ccb_pathinq cpi;
|
|
struct ccb_relsim crs;
|
|
struct ccb_setasync csa;
|
|
struct ccb_setdev csd;
|
|
struct ccb_pathstats cpis;
|
|
struct ccb_getdevstats cgds;
|
|
struct ccb_dev_match cdm;
|
|
struct ccb_trans_settings cts;
|
|
struct ccb_calc_geometry ccg;
|
|
struct ccb_abort cab;
|
|
struct ccb_resetbus crb;
|
|
struct ccb_resetdev crd;
|
|
struct ccb_termio tio;
|
|
struct ccb_accept_tio atio;
|
|
struct ccb_scsiio ctio;
|
|
struct ccb_en_lun cel;
|
|
struct ccb_immed_notify cin;
|
|
struct ccb_notify_ack cna;
|
|
struct ccb_eng_inq cei;
|
|
struct ccb_eng_exec cee;
|
|
struct ccb_rescan crcn;
|
|
struct ccb_debug cdbg;
|
|
};
|
|
|
|
__BEGIN_DECLS
|
|
static __inline void
|
|
cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
u_int32_t flags, u_int8_t tag_action,
|
|
u_int8_t *data_ptr, u_int32_t dxfer_len,
|
|
u_int8_t sense_len, u_int8_t cdb_len,
|
|
u_int32_t timeout);
|
|
|
|
static __inline void
|
|
cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
u_int32_t flags, u_int tag_action, u_int tag_id,
|
|
u_int init_id, u_int scsi_status, u_int8_t *data_ptr,
|
|
u_int32_t dxfer_len, u_int32_t timeout);
|
|
|
|
static __inline void
|
|
cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
u_int32_t flags, u_int8_t tag_action,
|
|
u_int8_t *data_ptr, u_int32_t dxfer_len,
|
|
u_int8_t sense_len, u_int8_t cdb_len,
|
|
u_int32_t timeout)
|
|
{
|
|
csio->ccb_h.func_code = XPT_SCSI_IO;
|
|
csio->ccb_h.flags = flags;
|
|
csio->ccb_h.retry_count = retries;
|
|
csio->ccb_h.cbfcnp = cbfcnp;
|
|
csio->ccb_h.timeout = timeout;
|
|
csio->data_ptr = data_ptr;
|
|
csio->dxfer_len = dxfer_len;
|
|
csio->sense_len = sense_len;
|
|
csio->cdb_len = cdb_len;
|
|
csio->tag_action = tag_action;
|
|
}
|
|
|
|
static __inline void
|
|
cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries,
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
|
u_int32_t flags, u_int tag_action, u_int tag_id,
|
|
u_int init_id, u_int scsi_status, u_int8_t *data_ptr,
|
|
u_int32_t dxfer_len, u_int32_t timeout)
|
|
{
|
|
csio->ccb_h.func_code = XPT_CONT_TARGET_IO;
|
|
csio->ccb_h.flags = flags;
|
|
csio->ccb_h.retry_count = retries;
|
|
csio->ccb_h.cbfcnp = cbfcnp;
|
|
csio->ccb_h.timeout = timeout;
|
|
csio->data_ptr = data_ptr;
|
|
csio->dxfer_len = dxfer_len;
|
|
csio->scsi_status = scsi_status;
|
|
csio->tag_action = tag_action;
|
|
csio->tag_id = tag_id;
|
|
csio->init_id = init_id;
|
|
}
|
|
|
|
__END_DECLS
|
|
|
|
#endif /* _CAM_CAM_CCB_H */
|