af3dc4a7ca
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
245 lines
6.5 KiB
C
245 lines
6.5 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (C) 2013 Ganbold Tsagaankhuu <ganbold@freebsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef __IF_EMACREG_H__
|
|
#define __IF_EMACREG_H__
|
|
|
|
/*
|
|
* EMAC register definitions
|
|
*/
|
|
#define EMAC_CTL 0x00
|
|
#define EMAC_CTL_RST (1 << 0)
|
|
#define EMAC_CTL_TX_EN (1 << 1)
|
|
#define EMAC_CTL_RX_EN (1 << 2)
|
|
|
|
#define EMAC_TX_MODE 0x04
|
|
#define EMAC_TX_FLOW 0x08
|
|
#define EMAC_TX_CTL0 0x0C
|
|
#define EMAC_TX_CTL1 0x10
|
|
#define EMAC_TX_INS 0x14
|
|
#define EMAC_TX_PL0 0x18
|
|
#define EMAC_TX_PL1 0x1C
|
|
#define EMAC_TX_STA 0x20
|
|
#define EMAC_TX_IO_DATA 0x24
|
|
#define EMAC_TX_IO_DATA1 0x28
|
|
#define EMAC_TX_TSVL0 0x2C
|
|
#define EMAC_TX_TSVH0 0x30
|
|
#define EMAC_TX_TSVL1 0x34
|
|
#define EMAC_TX_TSVH1 0x38
|
|
#define EMAC_TX_FIFO0 (1 << 0)
|
|
#define EMAC_TX_FIFO1 (1 << 1)
|
|
|
|
#define EMAC_RX_CTL 0x3C
|
|
#define EMAC_RX_HASH0 0x40
|
|
#define EMAC_RX_HASH1 0x44
|
|
#define EMAC_RX_STA 0x48
|
|
#define EMAC_RX_IO_DATA 0x4C
|
|
#define EMAC_RX_FBC 0x50
|
|
|
|
#define EMAC_INT_CTL 0x54
|
|
#define EMAC_INT_STA 0x58
|
|
#define EMAC_INT_STA_TX (EMAC_TX_FIFO0 | EMAC_TX_FIFO1)
|
|
#define EMAC_INT_STA_RX 0x100
|
|
#define EMAC_INT_EN (0xf << 0) | (1 << 8)
|
|
|
|
#define EMAC_MAC_CTL0 0x5C
|
|
#define EMAC_MAC_CTL1 0x60
|
|
#define EMAC_MAC_IPGT 0x64
|
|
#define EMAC_MAC_IPGR 0x68
|
|
#define EMAC_MAC_CLRT 0x6C
|
|
#define EMAC_MAC_MAXF 0x70
|
|
#define EMAC_MAC_SUPP 0x74
|
|
#define EMAC_MAC_TEST 0x78
|
|
#define EMAC_MAC_MCFG 0x7C
|
|
#define EMAC_MAC_MCMD 0x80
|
|
#define EMAC_MAC_MADR 0x84
|
|
#define EMAC_MAC_MWTD 0x88
|
|
#define EMAC_MAC_MRDD 0x8C
|
|
#define EMAC_MAC_MIND 0x90
|
|
#define EMAC_MAC_SSRR 0x94
|
|
#define EMAC_MAC_A0 0x98
|
|
#define EMAC_MAC_A1 0x9C
|
|
#define EMAC_MAC_A2 0xA0
|
|
|
|
#define EMAC_SAFX_L0 0xA4
|
|
#define EMAC_SAFX_H0 0xA8
|
|
#define EMAC_SAFX_L1 0xAC
|
|
#define EMAC_SAFX_H1 0xB0
|
|
#define EMAC_SAFX_L2 0xB4
|
|
#define EMAC_SAFX_H2 0xB8
|
|
#define EMAC_SAFX_L3 0xBC
|
|
#define EMAC_SAFX_H3 0xC0
|
|
|
|
#define EMAC_PHY_DUPLEX (1 << 8)
|
|
|
|
/*
|
|
* Each received packet has 8 bytes header:
|
|
* Byte 0: Packet valid flag: 0x01 valid, 0x00 not valid
|
|
* Byte 1: 0x43 -> Ascii code 'C'
|
|
* Byte 2: 0x41 -> Ascii code 'A'
|
|
* Byte 3: 0x4d -> Ascii code 'M'
|
|
* Byte 4: High byte of received packet's status
|
|
* Byte 5: Low byte of received packet's status
|
|
* Byte 6: High byte of packet size
|
|
* Byte 7: Low byte of packet size
|
|
*/
|
|
#define EMAC_PACKET_HEADER (0x0143414d)
|
|
|
|
/* Aborted frame enable */
|
|
#define EMAC_TX_AB_M (1 << 0)
|
|
|
|
/* 0: Enable CPU mode for TX, 1: DMA */
|
|
#define EMAC_TX_TM ~(1 << 1)
|
|
|
|
/* 0: DRQ asserted, 1: DRQ automatically */
|
|
#define EMAC_RX_DRQ_MODE (1 << 1)
|
|
|
|
/* 0: Enable CPU mode for RX, 1: DMA */
|
|
#define EMAC_RX_TM ~(1 << 2)
|
|
|
|
/* Pass all Frames */
|
|
#define EMAC_RX_PA (1 << 4)
|
|
|
|
/* Pass Control Frames */
|
|
#define EMAC_RX_PCF (1 << 5)
|
|
|
|
/* Pass Frames with CRC Error */
|
|
#define EMAC_RX_PCRCE (1 << 6)
|
|
|
|
/* Pass Frames with Length Error */
|
|
#define EMAC_RX_PLE (1 << 7)
|
|
|
|
/* Pass Frames length out of range */
|
|
#define EMAC_RX_POR (1 << 8)
|
|
|
|
/* Accept unicast Packets */
|
|
#define EMAC_RX_UCAD (1 << 16)
|
|
|
|
/* Enable DA Filtering */
|
|
#define EMAC_RX_DAF (1 << 17)
|
|
|
|
/* Accept multicast Packets */
|
|
#define EMAC_RX_MCO (1 << 20)
|
|
|
|
/* Enable Hash filter */
|
|
#define EMAC_RX_MHF (1 << 21)
|
|
|
|
/* Accept Broadcast Packets */
|
|
#define EMAC_RX_BCO (1 << 22)
|
|
|
|
/* Enable SA Filtering */
|
|
#define EMAC_RX_SAF (1 << 24)
|
|
|
|
/* Inverse Filtering */
|
|
#define EMAC_RX_SAIF (1 << 25)
|
|
|
|
#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | \
|
|
EMAC_RX_DAF | EMAC_RX_MCO | EMAC_RX_BCO)
|
|
|
|
/* Enable Receive Flow Control */
|
|
#define EMAC_MAC_CTL0_RFC (1 << 2)
|
|
|
|
/* Enable Transmit Flow Control */
|
|
#define EMAC_MAC_CTL0_TFC (1 << 3)
|
|
|
|
/* Enable soft reset */
|
|
#define EMAC_MAC_CTL0_SOFT_RST (1 << 15)
|
|
|
|
#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
|
|
|
|
/* Enable duplex */
|
|
#define EMAC_MAC_CTL1_DUP (1 << 0)
|
|
|
|
/* Enable MAC Frame Length Checking */
|
|
#define EMAC_MAC_CTL1_FLC (1 << 1)
|
|
|
|
/* Enable Huge Frame */
|
|
#define EMAC_MAC_CTL1_HF (1 << 2)
|
|
|
|
/* Enable MAC Delayed CRC */
|
|
#define EMAC_MAC_CTL1_DCRC (1 << 3)
|
|
|
|
/* Enable MAC CRC */
|
|
#define EMAC_MAC_CTL1_CRC (1 << 4)
|
|
|
|
/* Enable MAC PAD Short frames */
|
|
#define EMAC_MAC_CTL1_PC (1 << 5)
|
|
|
|
/* Enable MAC PAD Short frames and append CRC */
|
|
#define EMAC_MAC_CTL1_VC (1 << 6)
|
|
|
|
/* Enable MAC auto detect Short frames */
|
|
#define EMAC_MAC_CTL1_ADP (1 << 7)
|
|
|
|
#define EMAC_MAC_CTL1_PRE (1 << 8)
|
|
#define EMAC_MAC_CTL1_LPE (1 << 9)
|
|
|
|
/* Enable no back off */
|
|
#define EMAC_MAC_CTL1_NB (1 << 12)
|
|
|
|
#define EMAC_MAC_CTL1_BNB (1 << 13)
|
|
#define EMAC_MAC_CTL1_ED (1 << 14)
|
|
|
|
#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
|
|
EMAC_MAC_CTL1_PC)
|
|
|
|
/* half duplex */
|
|
#define EMAC_MAC_IPGT_HD 0x12
|
|
|
|
/* full duplex */
|
|
#define EMAC_MAC_IPGT_FD 0x15
|
|
|
|
#define EMAC_MAC_NBTB_IPG1 0xC
|
|
#define EMAC_MAC_NBTB_IPG2 0x12
|
|
|
|
#define EMAC_MAC_CW 0x37
|
|
#define EMAC_MAC_RM 0xF
|
|
|
|
#define EMAC_MAC_MFL 0x0600
|
|
|
|
/* Receive status */
|
|
#define EMAC_CRCERR (1 << 4)
|
|
#define EMAC_LENERR (3 << 5)
|
|
#define EMAC_PKT_OK (1 << 7)
|
|
|
|
#define EMAC_RX_FLUSH_FIFO (1 << 3)
|
|
#define EMAC_PHY_RESET (1 << 15)
|
|
#define EMAC_PHY_PWRDOWN (1 << 11)
|
|
|
|
#define EMAC_PROC_MIN 16
|
|
#define EMAC_PROC_MAX 255
|
|
#define EMAC_PROC_DEFAULT 64
|
|
|
|
#define EMAC_LOCK(cs) mtx_lock(&(sc)->emac_mtx)
|
|
#define EMAC_UNLOCK(cs) mtx_unlock(&(sc)->emac_mtx)
|
|
#define EMAC_ASSERT_LOCKED(sc) mtx_assert(&(sc)->emac_mtx, MA_OWNED);
|
|
|
|
#endif /* __IF_EMACREG_H__ */
|