d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
11bfc2922d
freebsd-skq/sys/dev/ipmi/ipmivars.h
John Baldwin d72a078647 Update the ipmi(4) driver: 
- Split out the communication protocols into their own files and use
  a couple of function pointers in the softc that the commuication
  protocols setup in their own attach routine.
- Add support for the SSIF interface (talking to IPMI over SMBus).
- Add an ACPI attachment.
- Add a PCI attachment that attaches to devices with the IPMI interface
  subclass.
- Split the ISA attachment out into its own file: ipmi_isa.c.
- Change the code to probe the SMBIOS table for an IPMI entry to just use
  pmap_mapbios() to map the table in rather than trying to setup a fake
  resource on an isa device and then activating the resource to map in the
  table.
- Make bus attachments leaner by adding attach functions for each
  communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.)
  that setup per-interface data.
- Formalize the model used by the driver to handle requests by adding an
  explicit struct ipmi_request object that holds the state of a given
  request and reply for the entire lifetime of the request.  By bundling
  the request into an object, it is easier to add retry logic to the various
  communication backends (as well as eventually support BT mode which uses
  a slightly different message format than KCS, SMIC, and SSIF).
- Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE.
- Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool
  on FreeBSD/amd64.
- Add ipmi(4) to i386 and amd64 NOTES.

Submitted by:	ambrisko (large portions of 2 and 3)
Sponsored by:	IronPort Systems, Yahoo!
MFC after:	6 days
2006-09-22 22:11:29 +00:00

267 lines
8.0 KiB
C
Raw Blame History

/*-
* Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef __IPMIVARS_H__
#define __IPMIVARS_H__
struct ipmi_get_info {
int iface_type;
uint64_t address;
int offset;
int io_mode;
int irq;
};
struct ipmi_device;
struct ipmi_request {
TAILQ_ENTRY(ipmi_request) ir_link;
struct ipmi_device *ir_owner; /* Driver uses NULL. */
u_char *ir_request; /* Request is data to send to BMC. */
size_t ir_requestlen;
u_char *ir_reply; /* Reply is data read from BMC. */
size_t ir_replybuflen; /* Length of ir_reply[] buffer. */
int ir_replylen; /* Length of reply from BMC. */
int ir_error;
long ir_msgid;
uint8_t ir_addr;
uint8_t ir_command;
uint8_t ir_compcode;
};
#define MAX_RES 3
#define KCS_DATA 0
#define KCS_CTL_STS 1
#define SMIC_DATA 0
#define SMIC_CTL_STS 1
#define SMIC_FLAGS 2
struct ipmi_softc;
/* Per struct cdev data. */
struct ipmi_device {
TAILQ_ENTRY(ipmi_device) ipmi_link;
TAILQ_HEAD(,ipmi_request) ipmi_completed_requests;
struct selinfo ipmi_select;
struct ipmi_softc *ipmi_softc;
struct cdev *ipmi_cdev;
int ipmi_open;
int ipmi_closing;
int ipmi_requests;
u_char ipmi_address; /* IPMB address. */
u_char ipmi_lun;
};
struct ipmi_kcs {
};
struct ipmi_smic {
};
struct ipmi_ssif {
device_t smbus;
int smbus_address;
};
struct ipmi_softc {
device_t ipmi_dev;
union {
struct ipmi_kcs kcs;
struct ipmi_smic smic;
struct ipmi_ssif ssif;
} _iface;
int ipmi_io_rid;
int ipmi_io_type;
struct resource *ipmi_io_res[MAX_RES];
int ipmi_io_spacing;
int ipmi_irq_rid;
struct resource *ipmi_irq_res;
void *ipmi_irq;
int ipmi_detaching;
#ifdef CLONING
int ipmi_cloning;
u_int ipmi_cdev_mask;
TAILQ_HEAD(,ipmi_device) ipmi_cdevs;
#else
struct ipmi_device ipmi_idev;
#endif
TAILQ_HEAD(,ipmi_request) ipmi_pending_requests;
#ifdef CLONING
eventhandler_tag ipmi_clone_tag;
#endif
eventhandler_tag ipmi_watchdog_tag;
struct intr_config_hook ipmi_ich;
struct mtx ipmi_lock;
struct cv ipmi_request_added;
struct proc *ipmi_kthread;
driver_intr_t *ipmi_intr;
int (*ipmi_startup)(struct ipmi_softc *);
int (*ipmi_enqueue_request)(struct ipmi_softc *, struct ipmi_request *);
};
#define ipmi_ssif_smbus_address _iface.ssif.smbus_address
#define ipmi_ssif_smbus _iface.ssif.smbus
struct ipmi_ipmb {
u_char foo;
};
#define KCS_MODE 0x01
#define SMIC_MODE 0x02
#define BT_MODE 0x03
#define SSIF_MODE 0x04
/* KCS status flags */
#define KCS_STATUS_OBF 0x01 /* Data Out ready from BMC */
#define KCS_STATUS_IBF 0x02 /* Data In from System */
#define KCS_STATUS_SMS_ATN 0x04 /* Ready in RX queue */
#define KCS_STATUS_C_D 0x08 /* Command/Data register write*/
#define KCS_STATUS_OEM1 0x10
#define KCS_STATUS_OEM2 0x20
#define KCS_STATUS_S0 0x40
#define KCS_STATUS_S1 0x80
#define KCS_STATUS_STATE(x) ((x)>>6)
#define KCS_STATUS_STATE_IDLE 0x0
#define KCS_STATUS_STATE_READ 0x1
#define KCS_STATUS_STATE_WRITE 0x2
#define KCS_STATUS_STATE_ERROR 0x3
#define KCS_IFACE_STATUS_OK 0x00
#define KCS_IFACE_STATUS_ABORT 0x01
#define KCS_IFACE_STATUS_ILLEGAL 0x02
#define KCS_IFACE_STATUS_LENGTH_ERR 0x06
#define KCS_IFACE_STATUS_UNKNOWN_ERR 0xff
/* KCS control codes */
#define KCS_CONTROL_GET_STATUS_ABORT 0x60
#define KCS_CONTROL_WRITE_START 0x61
#define KCS_CONTROL_WRITE_END 0x62
#define KCS_DATA_IN_READ 0x68
/* SMIC status flags */
#define SMIC_STATUS_BUSY 0x01 /* System set and BMC clears it */
#define SMIC_STATUS_SMS_ATN 0x04 /* BMC has a message */
#define SMIC_STATUS_EVT_ATN 0x08 /* Event has been RX */
#define SMIC_STATUS_SMI 0x10 /* asserted SMI */
#define SMIC_STATUS_TX_RDY 0x40 /* Ready to accept WRITE */
#define SMIC_STATUS_RX_RDY 0x80 /* Ready to read */
#define SMIC_STATUS_RESERVED 0x22
/* SMIC control codes */
#define SMIC_CC_SMS_GET_STATUS 0x40
#define SMIC_CC_SMS_WR_START 0x41
#define SMIC_CC_SMS_WR_NEXT 0x42
#define SMIC_CC_SMS_WR_END 0x43
#define SMIC_CC_SMS_RD_START 0x44
#define SMIC_CC_SMS_RD_NEXT 0x45
#define SMIC_CC_SMS_RD_END 0x46
/* SMIC status codes */
#define SMIC_SC_SMS_RDY 0xc0
#define SMIC_SC_SMS_WR_START 0xc1
#define SMIC_SC_SMS_WR_NEXT 0xc2
#define SMIC_SC_SMS_WR_END 0xc3
#define SMIC_SC_SMS_RD_START 0xc4
#define SMIC_SC_SMS_RD_NEXT 0xc5
#define SMIC_SC_SMS_RD_END 0xc6
#define IPMI_ADDR(netfn, lun) ((netfn) << 2 | (lun))
#define IPMI_REPLY_ADDR(addr) ((addr) + 0x4)
#define IPMI_LOCK(sc) mtx_lock(&(sc)->ipmi_lock)
#define IPMI_UNLOCK(sc) mtx_unlock(&(sc)->ipmi_lock)
#define IPMI_LOCK_ASSERT(sc) mtx_assert(&(sc)->ipmi_lock, MA_OWNED)
#define ipmi_alloc_driver_request(addr, cmd, reqlen, replylen) \
ipmi_alloc_request(NULL, 0, (addr), (cmd), (reqlen), (replylen))
#if __FreeBSD_version < 601105
#define bus_read_1(r, o) \
bus_space_read_1(rman_get_bustag(r), rman_get_bushandle(r), (o))
#define bus_write_1(r, o, v) \
bus_space_write_1(rman_get_bustag(r), rman_get_bushandle(r), (o), (v))
#endif
/* I/O to a single I/O resource. */
#define INB_SINGLE(sc, x) \
bus_read_1((sc)->ipmi_io_res[0], (sc)->ipmi_io_spacing * (x))
#define OUTB_SINGLE(sc, x, value) \
bus_write_1((sc)->ipmi_io_res[0], (sc)->ipmi_io_spacing * (x), value)
/* I/O with each register in its in I/O resource. */
#define INB_MULTIPLE(sc, x) \
bus_read_1((sc)->ipmi_io_res[(x)], 0)
#define OUTB_MULTIPLE(sc, x, value) \
bus_write_1((sc)->ipmi_io_res[(x)], 0, value)
/*
* Determine I/O method based on whether or not we have more than one I/O
* resource.
*/
#define INB(sc, x) \
((sc)->ipmi_io_res[1] != NULL ? INB_MULTIPLE(sc, x) : INB_SINGLE(sc, x))
#define OUTB(sc, x, value) \
((sc)->ipmi_io_res[1] != NULL ? OUTB_MULTIPLE(sc, x, value) : \
OUTB_SINGLE(sc, x, value))
#define MAX_TIMEOUT 3 * hz
int ipmi_attach(device_t);
int ipmi_detach(device_t);
void ipmi_release_resources(device_t);
/* Manage requests. */
struct ipmi_request *ipmi_alloc_request(struct ipmi_device *, long, uint8_t,
uint8_t, size_t, size_t);
void ipmi_complete_request(struct ipmi_softc *, struct ipmi_request *);
struct ipmi_request *ipmi_dequeue_request(struct ipmi_softc *);
void ipmi_free_request(struct ipmi_request *);
int ipmi_polled_enqueue_request(struct ipmi_softc *, struct ipmi_request *);
int ipmi_submit_driver_request(struct ipmi_softc *, struct ipmi_request *,
int);
/* Identify BMC interface via SMBIOS. */
int ipmi_smbios_identify(struct ipmi_get_info *);
/* Match BMC PCI device listed in SMBIOS. */
const char *ipmi_pci_match(uint16_t, uint16_t);
/* Interface attach routines. */
int ipmi_kcs_attach(struct ipmi_softc *);
int ipmi_kcs_probe_align(struct ipmi_softc *);
int ipmi_smic_attach(struct ipmi_softc *);
int ipmi_ssif_attach(struct ipmi_softc *, device_t, int);
#ifdef IPMB
int ipmi_handle_attn(struct ipmi_softc *);
#endif
extern devclass_t ipmi_devclass;
extern int ipmi_attached;
#endif /* !__IPMIVARS_H__ */
Reference in New Issue View Git Blame Copy Permalink