freebsd-skq/sys/dev/mii/icsphy.c
marius 385153aa98 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00

276 lines
7.5 KiB
C

/* $NetBSD: icsphy.c,v 1.41 2006/11/16 21:24:07 christos Exp $ */
/*-
* Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* driver for Integrated Circuit Systems' ICS1889-1893 ethernet 10/100 PHY
* datasheet from www.icst.com
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"
#include <dev/mii/icsphyreg.h>
#include "miibus_if.h"
static int icsphy_probe(device_t dev);
static int icsphy_attach(device_t dev);
struct icsphy_softc {
struct mii_softc mii_sc;
int mii_model;
};
static device_method_t icsphy_methods[] = {
/* device interface */
DEVMETHOD(device_probe, icsphy_probe),
DEVMETHOD(device_attach, icsphy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
{ 0, 0 }
};
static devclass_t icsphy_devclass;
static driver_t icsphy_driver = {
"icsphy",
icsphy_methods,
sizeof(struct icsphy_softc)
};
DRIVER_MODULE(icsphy, miibus, icsphy_driver, icsphy_devclass, 0, 0);
static int icsphy_service(struct mii_softc *, struct mii_data *, int);
static void icsphy_status(struct mii_softc *);
static void icsphy_reset(struct mii_softc *);
static const struct mii_phydesc icsphys[] = {
MII_PHY_DESC(xxICS, 1889),
MII_PHY_DESC(xxICS, 1890),
MII_PHY_DESC(xxICS, 1892),
MII_PHY_DESC(xxICS, 1893),
MII_PHY_END
};
static int
icsphy_probe(device_t dev)
{
return (mii_phy_dev_probe(dev, icsphys, BUS_PROBE_DEFAULT));
}
static int
icsphy_attach(device_t dev)
{
struct icsphy_softc *isc;
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
isc = device_get_softc(dev);
sc = &isc->mii_sc;
ma = device_get_ivars(dev);
sc->mii_dev = device_get_parent(dev);
mii = ma->mii_data;
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_flags = miibus_get_flags(dev);
sc->mii_inst = mii->mii_instance++;
sc->mii_phy = ma->mii_phyno;
sc->mii_service = icsphy_service;
sc->mii_pdata = mii;
sc->mii_flags |= MIIF_NOISOLATE;
ifmedia_add(&mii->mii_media,
IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst),
MII_MEDIA_100_TX, NULL);
isc->mii_model = MII_MODEL(ma->mii_id2);
icsphy_reset(sc);
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
device_printf(dev, " ");
mii_phy_add_media(sc);
printf("\n");
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
static int
icsphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
switch (cmd) {
case MII_POLLSTAT:
break;
case MII_MEDIACHG:
/*
* If the interface is not up, don't do anything.
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
mii_phy_setmedia(sc);
break;
case MII_TICK:
if (mii_phy_tick(sc) == EJUSTRETURN)
return (0);
break;
}
/* Update the media status. */
icsphy_status(sc);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
return (0);
}
static void
icsphy_status(struct mii_softc *sc)
{
struct mii_data *mii = sc->mii_pdata;
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
int bmcr, qpr;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
/*
* Don't get link from the BMSR. It's available in the QPR,
* and we have to read it twice to unlatch it anyhow. This
* gives us fewer register reads.
*/
qpr = PHY_READ(sc, MII_ICSPHY_QPR); /* unlatch */
qpr = PHY_READ(sc, MII_ICSPHY_QPR); /* real value */
if (qpr & QPR_LINK)
mii->mii_media_status |= IFM_ACTIVE;
bmcr = PHY_READ(sc, MII_BMCR);
if (bmcr & BMCR_ISO) {
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
if (bmcr & BMCR_LOOP)
mii->mii_media_active |= IFM_LOOP;
if (bmcr & BMCR_AUTOEN) {
if ((qpr & QPR_ACOMP) == 0) {
/* Erg, still trying, I guess... */
mii->mii_media_active |= IFM_NONE;
return;
}
if (qpr & QPR_SPEED)
mii->mii_media_active |= IFM_100_TX;
else
mii->mii_media_active |= IFM_10_T;
if (qpr & QPR_FDX)
mii->mii_media_active |= IFM_FDX;
else
mii->mii_media_active |= IFM_HDX;
} else
mii->mii_media_active = ife->ifm_media;
}
static void
icsphy_reset(struct mii_softc *sc)
{
struct icsphy_softc *isc = (struct icsphy_softc *)sc;
mii_phy_reset(sc);
/* set powerdown feature */
switch (isc->mii_model) {
case MII_MODEL_xxICS_1890:
case MII_MODEL_xxICS_1893:
PHY_WRITE(sc, MII_ICSPHY_ECR2, ECR2_100AUTOPWRDN);
break;
case MII_MODEL_xxICS_1892:
PHY_WRITE(sc, MII_ICSPHY_ECR2,
ECR2_10AUTOPWRDN|ECR2_100AUTOPWRDN);
break;
default:
/* 1889 have no ECR2 */
break;
}
/*
* There is no description that the reset do auto-negotiation in the
* data sheet.
*/
PHY_WRITE(sc, MII_BMCR, BMCR_S100|BMCR_STARTNEG|BMCR_FDX);
}