d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-skq/sys/pci
History
billf 750bc43f52 o No need to print the vendor/device ID for things that matched succesfully. 
o ``<device name>'' versus ``device name'' for things that fall under nomatch.

Reviewed by:	dfr (in principle)
Approved by:	Baron von Hubbard
2000-02-22 21:44:39 +00:00
..
adw_pci.c
…
alpm.c
Remove the 'ivars' arguement to device_add_child() and
1999-12-03 08:41:24 +00:00
amd.c
The error status for a scsi status error is "CAM_SCSI_STATUS_ERROR", not 0.
2000-01-14 03:39:30 +00:00
amd.h
…
cy_pci.c
…
cy_pcireg.h
…
dc21040reg.h
…
ide_pci.c
Remove #include "wd.h" and #if NWDC > 0 as that's always true as this
2000-01-29 16:59:53 +00:00
ide_pcireg.h
…
if_ar_p.c
…
if_dc.c
Add support for DM9102A boards with Davicom DM9801 HomePNA PHYs.
2000-01-24 17:19:37 +00:00
if_dcreg.h
Add support for the Davicom DM9102A 10/100 ethernet controller chip.
2000-01-19 19:03:08 +00:00
if_de.c
Include the file that defines PCIM_CMD_BUSMASTEREN.
2000-02-16 02:22:37 +00:00
if_devar.h
…
if_en_pci.c
…
if_fxp.c
…
if_fxpreg.h
…
if_fxpvar.h
…
if_lnc_p.c
…
if_mn.c
Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
1999-12-29 05:07:58 +00:00
if_rl.c
Fix a small typo in the comments.
1999-12-28 06:04:29 +00:00
if_rlreg.h
…
if_sf.c
Modify the Adaptec "starfire" driver to reset the PHY on the MII bus
1999-12-05 20:02:45 +00:00
if_sfreg.h
Modify the Adaptec "starfire" driver to reset the PHY on the MII bus
1999-12-05 20:02:45 +00:00
if_sis.c
…
if_sisreg.h
…
if_sk.c
…
if_skreg.h
…
if_sr_p.c
…
if_ste.c
Spruce up the Sundance ST201 driver:
1999-12-07 20:14:42 +00:00
if_stereg.h
Spruce up the Sundance ST201 driver:
1999-12-07 20:14:42 +00:00
if_ti.c
Add the vendor/device ID for the Farallon PN9000SX gigabit ethernet
2000-01-18 00:26:29 +00:00
if_tireg.h
Update the Tigon driver to use the 12.3.18 firmware release from Alteon.
2000-02-10 00:37:48 +00:00
if_tl.c
Fix the tl driver so it doesn't run off the end of the RX descriptor list
2000-01-15 20:14:49 +00:00
if_tlreg.h
…
if_tx.c
Change incorrect NULLs to 0s
1999-12-21 11:14:12 +00:00
if_txvar.h
…
if_vr.c
…
if_vrreg.h
…
if_wb.c
…
if_wbreg.h
…
if_wx.c
put things in place for jumbograms
2000-01-25 06:09:53 +00:00
if_wxreg.h
define jumbo packet size
2000-01-25 04:11:33 +00:00
if_wxvar.h
add PREVIOUS index macro for transmit side
2000-01-23 03:18:14 +00:00
if_xl.c
Close PR# 15986: issue an RX reset command when initializing the interface,
2000-01-09 21:12:59 +00:00
if_xlreg.h
Update the xl driver to recognize yet another 3c905B/3c905C class NIC:
1999-12-16 18:33:57 +00:00
intpm.c
Remove the 'ivars' arguement to device_add_child() and
1999-12-03 08:41:24 +00:00
intpmreg.h
…
isp_pci.c
If the CDB length is greater than 12 for parallel SCSI, ispscsicmd has
2000-02-15 00:50:01 +00:00
locate.pl
…
meteor_reg.h
…
meteor.c
…
ncr.c
Add 53C895A and 53C1510D device description to the ncr chip table.
2000-01-23 12:27:49 +00:00
ncrreg.h
…
ohci_pci.c
Move the warning on wrong IRQ values to the right place, before any
2000-02-20 14:22:44 +00:00
pccbb.c
Initial import of cardbus bridge driver (cbb) from the latest
1999-11-18 07:14:54 +00:00
pccbbreg.h
Initial import of cardbus bridge driver (cbb) from the latest
1999-11-18 07:14:54 +00:00
pccbbvar.h
Initial import of cardbus bridge driver (cbb) from the latest
1999-11-18 07:14:54 +00:00
pci_compat.c
Zap pci_map_dense() and pci_map_bwx() - they were for compatability but
2000-01-05 16:40:10 +00:00
pci_if.m
…
pci.c
o No need to print the vendor/device ID for things that matched succesfully.
2000-02-22 21:44:39 +00:00
pcic_p.c
Update the pci->pcic compatability module to newbus. This is a simple
2000-02-02 16:49:21 +00:00
pcic_p.h
Fill in the blanks for some of the Texas Instruments cardbus controllers.
1999-12-31 07:22:24 +00:00
pcireg.h
Added PCIR_BIOS (0x30).
2000-01-10 12:53:19 +00:00
pcisupport.c
Add the ESS Maestro and the ATI Mobility-1 to the generic chip match and
2000-02-21 21:46:19 +00:00
pcivar.h
Remove the vga-pci driver. It serves no purpose and it hides the hardware
2000-02-19 09:44:06 +00:00
scsiiom.c
…
simos.c
…
simos.h
…
ti_fw2.h
Update the Tigon driver to use the 12.3.18 firmware release from Alteon.
2000-02-10 00:37:48 +00:00
ti_fw.h
Update the Tigon driver to use the 12.3.18 firmware release from Alteon.
2000-02-10 00:37:48 +00:00
uhci_pci.c
Move the warning on wrong IRQ values to the right place, before any
2000-02-20 14:22:44 +00:00
xmaciireg.h
…
xrpu.c
Do a trivial conversion of xrpu to newbus.
2000-02-12 07:56:44 +00:00