3188 lines
83 KiB
C
3188 lines
83 KiB
C
/*-
|
|
* Copyright (c) 1997, 1998-2003
|
|
* Bill Paul <wpaul@windriver.com>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* RealTek 8139C+/8169/8169S/8110S/8168/8111/8101E PCI NIC driver
|
|
*
|
|
* Written by Bill Paul <wpaul@windriver.com>
|
|
* Senior Networking Software Engineer
|
|
* Wind River Systems
|
|
*/
|
|
|
|
/*
|
|
* This driver is designed to support RealTek's next generation of
|
|
* 10/100 and 10/100/1000 PCI ethernet controllers. There are currently
|
|
* seven devices in this family: the RTL8139C+, the RTL8169, the RTL8169S,
|
|
* RTL8110S, the RTL8168, the RTL8111 and the RTL8101E.
|
|
*
|
|
* The 8139C+ is a 10/100 ethernet chip. It is backwards compatible
|
|
* with the older 8139 family, however it also supports a special
|
|
* C+ mode of operation that provides several new performance enhancing
|
|
* features. These include:
|
|
*
|
|
* o Descriptor based DMA mechanism. Each descriptor represents
|
|
* a single packet fragment. Data buffers may be aligned on
|
|
* any byte boundary.
|
|
*
|
|
* o 64-bit DMA
|
|
*
|
|
* o TCP/IP checksum offload for both RX and TX
|
|
*
|
|
* o High and normal priority transmit DMA rings
|
|
*
|
|
* o VLAN tag insertion and extraction
|
|
*
|
|
* o TCP large send (segmentation offload)
|
|
*
|
|
* Like the 8139, the 8139C+ also has a built-in 10/100 PHY. The C+
|
|
* programming API is fairly straightforward. The RX filtering, EEPROM
|
|
* access and PHY access is the same as it is on the older 8139 series
|
|
* chips.
|
|
*
|
|
* The 8169 is a 64-bit 10/100/1000 gigabit ethernet MAC. It has almost the
|
|
* same programming API and feature set as the 8139C+ with the following
|
|
* differences and additions:
|
|
*
|
|
* o 1000Mbps mode
|
|
*
|
|
* o Jumbo frames
|
|
*
|
|
* o GMII and TBI ports/registers for interfacing with copper
|
|
* or fiber PHYs
|
|
*
|
|
* o RX and TX DMA rings can have up to 1024 descriptors
|
|
* (the 8139C+ allows a maximum of 64)
|
|
*
|
|
* o Slight differences in register layout from the 8139C+
|
|
*
|
|
* The TX start and timer interrupt registers are at different locations
|
|
* on the 8169 than they are on the 8139C+. Also, the status word in the
|
|
* RX descriptor has a slightly different bit layout. The 8169 does not
|
|
* have a built-in PHY. Most reference boards use a Marvell 88E1000 'Alaska'
|
|
* copper gigE PHY.
|
|
*
|
|
* The 8169S/8110S 10/100/1000 devices have built-in copper gigE PHYs
|
|
* (the 'S' stands for 'single-chip'). These devices have the same
|
|
* programming API as the older 8169, but also have some vendor-specific
|
|
* registers for the on-board PHY. The 8110S is a LAN-on-motherboard
|
|
* part designed to be pin-compatible with the RealTek 8100 10/100 chip.
|
|
*
|
|
* This driver takes advantage of the RX and TX checksum offload and
|
|
* VLAN tag insertion/extraction features. It also implements TX
|
|
* interrupt moderation using the timer interrupt registers, which
|
|
* significantly reduces TX interrupt load. There is also support
|
|
* for jumbo frames, however the 8169/8169S/8110S can not transmit
|
|
* jumbo frames larger than 7440, so the max MTU possible with this
|
|
* driver is 7422 bytes.
|
|
*/
|
|
|
|
#ifdef HAVE_KERNEL_OPTION_HEADERS
|
|
#include "opt_device_polling.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/taskqueue.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <pci/if_rlreg.h>
|
|
|
|
MODULE_DEPEND(re, pci, 1, 1, 1);
|
|
MODULE_DEPEND(re, ether, 1, 1, 1);
|
|
MODULE_DEPEND(re, miibus, 1, 1, 1);
|
|
|
|
/* "device miibus" required. See GENERIC if you get errors here. */
|
|
#include "miibus_if.h"
|
|
|
|
/* Tunables. */
|
|
static int msi_disable = 0;
|
|
TUNABLE_INT("hw.re.msi_disable", &msi_disable);
|
|
static int prefer_iomap = 0;
|
|
TUNABLE_INT("hw.re.prefer_iomap", &prefer_iomap);
|
|
|
|
#define RE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
static struct rl_type re_devs[] = {
|
|
{ DLINK_VENDORID, DLINK_DEVICEID_528T, 0,
|
|
"D-Link DGE-528(T) Gigabit Ethernet Adapter" },
|
|
{ RT_VENDORID, RT_DEVICEID_8139, 0,
|
|
"RealTek 8139C+ 10/100BaseTX" },
|
|
{ RT_VENDORID, RT_DEVICEID_8101E, 0,
|
|
"RealTek 8101E/8102E/8102EL/8103E PCIe 10/100baseTX" },
|
|
{ RT_VENDORID, RT_DEVICEID_8168, 0,
|
|
"RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet" },
|
|
{ RT_VENDORID, RT_DEVICEID_8169, 0,
|
|
"RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet" },
|
|
{ RT_VENDORID, RT_DEVICEID_8169SC, 0,
|
|
"RealTek 8169SC/8110SC Single-chip Gigabit Ethernet" },
|
|
{ COREGA_VENDORID, COREGA_DEVICEID_CGLAPCIGT, 0,
|
|
"Corega CG-LAPCIGT (RTL8169S) Gigabit Ethernet" },
|
|
{ LINKSYS_VENDORID, LINKSYS_DEVICEID_EG1032, 0,
|
|
"Linksys EG1032 (RTL8169S) Gigabit Ethernet" },
|
|
{ USR_VENDORID, USR_DEVICEID_997902, 0,
|
|
"US Robotics 997902 (RTL8169S) Gigabit Ethernet" }
|
|
};
|
|
|
|
static struct rl_hwrev re_hwrevs[] = {
|
|
{ RL_HWREV_8139, RL_8139, "" },
|
|
{ RL_HWREV_8139A, RL_8139, "A" },
|
|
{ RL_HWREV_8139AG, RL_8139, "A-G" },
|
|
{ RL_HWREV_8139B, RL_8139, "B" },
|
|
{ RL_HWREV_8130, RL_8139, "8130" },
|
|
{ RL_HWREV_8139C, RL_8139, "C" },
|
|
{ RL_HWREV_8139D, RL_8139, "8139D/8100B/8100C" },
|
|
{ RL_HWREV_8139CPLUS, RL_8139CPLUS, "C+"},
|
|
{ RL_HWREV_8168_SPIN1, RL_8169, "8168"},
|
|
{ RL_HWREV_8169, RL_8169, "8169"},
|
|
{ RL_HWREV_8169S, RL_8169, "8169S"},
|
|
{ RL_HWREV_8110S, RL_8169, "8110S"},
|
|
{ RL_HWREV_8169_8110SB, RL_8169, "8169SB/8110SB"},
|
|
{ RL_HWREV_8169_8110SC, RL_8169, "8169SC/8110SC"},
|
|
{ RL_HWREV_8169_8110SBL, RL_8169, "8169SBL/8110SBL"},
|
|
{ RL_HWREV_8169_8110SCE, RL_8169, "8169SC/8110SC"},
|
|
{ RL_HWREV_8100, RL_8139, "8100"},
|
|
{ RL_HWREV_8101, RL_8139, "8101"},
|
|
{ RL_HWREV_8100E, RL_8169, "8100E"},
|
|
{ RL_HWREV_8101E, RL_8169, "8101E"},
|
|
{ RL_HWREV_8102E, RL_8169, "8102E"},
|
|
{ RL_HWREV_8102EL, RL_8169, "8102EL"},
|
|
{ RL_HWREV_8102EL_SPIN1, RL_8169, "8102EL"},
|
|
{ RL_HWREV_8103E, RL_8169, "8103E"},
|
|
{ RL_HWREV_8168_SPIN2, RL_8169, "8168"},
|
|
{ RL_HWREV_8168_SPIN3, RL_8169, "8168"},
|
|
{ RL_HWREV_8168C, RL_8169, "8168C/8111C"},
|
|
{ RL_HWREV_8168C_SPIN2, RL_8169, "8168C/8111C"},
|
|
{ RL_HWREV_8168CP, RL_8169, "8168CP/8111CP"},
|
|
{ RL_HWREV_8168D, RL_8169, "8168D/8111D"},
|
|
{ RL_HWREV_8168DP, RL_8169, "8168DP/8111DP"},
|
|
{ RL_HWREV_8168E, RL_8169, "8168E/8111E"},
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
static int re_probe (device_t);
|
|
static int re_attach (device_t);
|
|
static int re_detach (device_t);
|
|
|
|
static int re_encap (struct rl_softc *, struct mbuf **);
|
|
|
|
static void re_dma_map_addr (void *, bus_dma_segment_t *, int, int);
|
|
static int re_allocmem (device_t, struct rl_softc *);
|
|
static __inline void re_discard_rxbuf
|
|
(struct rl_softc *, int);
|
|
static int re_newbuf (struct rl_softc *, int);
|
|
static int re_rx_list_init (struct rl_softc *);
|
|
static int re_tx_list_init (struct rl_softc *);
|
|
#ifdef RE_FIXUP_RX
|
|
static __inline void re_fixup_rx
|
|
(struct mbuf *);
|
|
#endif
|
|
static int re_rxeof (struct rl_softc *, int *);
|
|
static void re_txeof (struct rl_softc *);
|
|
#ifdef DEVICE_POLLING
|
|
static int re_poll (struct ifnet *, enum poll_cmd, int);
|
|
static int re_poll_locked (struct ifnet *, enum poll_cmd, int);
|
|
#endif
|
|
static int re_intr (void *);
|
|
static void re_tick (void *);
|
|
static void re_tx_task (void *, int);
|
|
static void re_int_task (void *, int);
|
|
static void re_start (struct ifnet *);
|
|
static int re_ioctl (struct ifnet *, u_long, caddr_t);
|
|
static void re_init (void *);
|
|
static void re_init_locked (struct rl_softc *);
|
|
static void re_stop (struct rl_softc *);
|
|
static void re_watchdog (struct rl_softc *);
|
|
static int re_suspend (device_t);
|
|
static int re_resume (device_t);
|
|
static int re_shutdown (device_t);
|
|
static int re_ifmedia_upd (struct ifnet *);
|
|
static void re_ifmedia_sts (struct ifnet *, struct ifmediareq *);
|
|
|
|
static void re_eeprom_putbyte (struct rl_softc *, int);
|
|
static void re_eeprom_getword (struct rl_softc *, int, u_int16_t *);
|
|
static void re_read_eeprom (struct rl_softc *, caddr_t, int, int);
|
|
static int re_gmii_readreg (device_t, int, int);
|
|
static int re_gmii_writereg (device_t, int, int, int);
|
|
|
|
static int re_miibus_readreg (device_t, int, int);
|
|
static int re_miibus_writereg (device_t, int, int, int);
|
|
static void re_miibus_statchg (device_t);
|
|
|
|
static void re_set_rxmode (struct rl_softc *);
|
|
static void re_reset (struct rl_softc *);
|
|
static void re_setwol (struct rl_softc *);
|
|
static void re_clrwol (struct rl_softc *);
|
|
|
|
#ifdef RE_DIAG
|
|
static int re_diag (struct rl_softc *);
|
|
#endif
|
|
|
|
static device_method_t re_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, re_probe),
|
|
DEVMETHOD(device_attach, re_attach),
|
|
DEVMETHOD(device_detach, re_detach),
|
|
DEVMETHOD(device_suspend, re_suspend),
|
|
DEVMETHOD(device_resume, re_resume),
|
|
DEVMETHOD(device_shutdown, re_shutdown),
|
|
|
|
/* bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, re_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, re_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, re_miibus_statchg),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t re_driver = {
|
|
"re",
|
|
re_methods,
|
|
sizeof(struct rl_softc)
|
|
};
|
|
|
|
static devclass_t re_devclass;
|
|
|
|
DRIVER_MODULE(re, pci, re_driver, re_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, re, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
#define EE_SET(x) \
|
|
CSR_WRITE_1(sc, RL_EECMD, \
|
|
CSR_READ_1(sc, RL_EECMD) | x)
|
|
|
|
#define EE_CLR(x) \
|
|
CSR_WRITE_1(sc, RL_EECMD, \
|
|
CSR_READ_1(sc, RL_EECMD) & ~x)
|
|
|
|
/*
|
|
* Send a read command and address to the EEPROM, check for ACK.
|
|
*/
|
|
static void
|
|
re_eeprom_putbyte(struct rl_softc *sc, int addr)
|
|
{
|
|
int d, i;
|
|
|
|
d = addr | (RL_9346_READ << sc->rl_eewidth);
|
|
|
|
/*
|
|
* Feed in each bit and strobe the clock.
|
|
*/
|
|
|
|
for (i = 1 << (sc->rl_eewidth + 3); i; i >>= 1) {
|
|
if (d & i) {
|
|
EE_SET(RL_EE_DATAIN);
|
|
} else {
|
|
EE_CLR(RL_EE_DATAIN);
|
|
}
|
|
DELAY(100);
|
|
EE_SET(RL_EE_CLK);
|
|
DELAY(150);
|
|
EE_CLR(RL_EE_CLK);
|
|
DELAY(100);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read a word of data stored in the EEPROM at address 'addr.'
|
|
*/
|
|
static void
|
|
re_eeprom_getword(struct rl_softc *sc, int addr, u_int16_t *dest)
|
|
{
|
|
int i;
|
|
u_int16_t word = 0;
|
|
|
|
/*
|
|
* Send address of word we want to read.
|
|
*/
|
|
re_eeprom_putbyte(sc, addr);
|
|
|
|
/*
|
|
* Start reading bits from EEPROM.
|
|
*/
|
|
for (i = 0x8000; i; i >>= 1) {
|
|
EE_SET(RL_EE_CLK);
|
|
DELAY(100);
|
|
if (CSR_READ_1(sc, RL_EECMD) & RL_EE_DATAOUT)
|
|
word |= i;
|
|
EE_CLR(RL_EE_CLK);
|
|
DELAY(100);
|
|
}
|
|
|
|
*dest = word;
|
|
}
|
|
|
|
/*
|
|
* Read a sequence of words from the EEPROM.
|
|
*/
|
|
static void
|
|
re_read_eeprom(struct rl_softc *sc, caddr_t dest, int off, int cnt)
|
|
{
|
|
int i;
|
|
u_int16_t word = 0, *ptr;
|
|
|
|
CSR_SETBIT_1(sc, RL_EECMD, RL_EEMODE_PROGRAM);
|
|
|
|
DELAY(100);
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
CSR_SETBIT_1(sc, RL_EECMD, RL_EE_SEL);
|
|
re_eeprom_getword(sc, off + i, &word);
|
|
CSR_CLRBIT_1(sc, RL_EECMD, RL_EE_SEL);
|
|
ptr = (u_int16_t *)(dest + (i * 2));
|
|
*ptr = word;
|
|
}
|
|
|
|
CSR_CLRBIT_1(sc, RL_EECMD, RL_EEMODE_PROGRAM);
|
|
}
|
|
|
|
static int
|
|
re_gmii_readreg(device_t dev, int phy, int reg)
|
|
{
|
|
struct rl_softc *sc;
|
|
u_int32_t rval;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Let the rgephy driver read the GMEDIASTAT register */
|
|
|
|
if (reg == RL_GMEDIASTAT) {
|
|
rval = CSR_READ_1(sc, RL_GMEDIASTAT);
|
|
return (rval);
|
|
}
|
|
|
|
CSR_WRITE_4(sc, RL_PHYAR, reg << 16);
|
|
DELAY(1000);
|
|
|
|
for (i = 0; i < RL_PHY_TIMEOUT; i++) {
|
|
rval = CSR_READ_4(sc, RL_PHYAR);
|
|
if (rval & RL_PHYAR_BUSY)
|
|
break;
|
|
DELAY(100);
|
|
}
|
|
|
|
if (i == RL_PHY_TIMEOUT) {
|
|
device_printf(sc->rl_dev, "PHY read failed\n");
|
|
return (0);
|
|
}
|
|
|
|
return (rval & RL_PHYAR_PHYDATA);
|
|
}
|
|
|
|
static int
|
|
re_gmii_writereg(device_t dev, int phy, int reg, int data)
|
|
{
|
|
struct rl_softc *sc;
|
|
u_int32_t rval;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
CSR_WRITE_4(sc, RL_PHYAR, (reg << 16) |
|
|
(data & RL_PHYAR_PHYDATA) | RL_PHYAR_BUSY);
|
|
DELAY(1000);
|
|
|
|
for (i = 0; i < RL_PHY_TIMEOUT; i++) {
|
|
rval = CSR_READ_4(sc, RL_PHYAR);
|
|
if (!(rval & RL_PHYAR_BUSY))
|
|
break;
|
|
DELAY(100);
|
|
}
|
|
|
|
if (i == RL_PHY_TIMEOUT) {
|
|
device_printf(sc->rl_dev, "PHY write failed\n");
|
|
return (0);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
re_miibus_readreg(device_t dev, int phy, int reg)
|
|
{
|
|
struct rl_softc *sc;
|
|
u_int16_t rval = 0;
|
|
u_int16_t re8139_reg = 0;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->rl_type == RL_8169) {
|
|
rval = re_gmii_readreg(dev, phy, reg);
|
|
return (rval);
|
|
}
|
|
|
|
switch (reg) {
|
|
case MII_BMCR:
|
|
re8139_reg = RL_BMCR;
|
|
break;
|
|
case MII_BMSR:
|
|
re8139_reg = RL_BMSR;
|
|
break;
|
|
case MII_ANAR:
|
|
re8139_reg = RL_ANAR;
|
|
break;
|
|
case MII_ANER:
|
|
re8139_reg = RL_ANER;
|
|
break;
|
|
case MII_ANLPAR:
|
|
re8139_reg = RL_LPAR;
|
|
break;
|
|
case MII_PHYIDR1:
|
|
case MII_PHYIDR2:
|
|
return (0);
|
|
/*
|
|
* Allow the rlphy driver to read the media status
|
|
* register. If we have a link partner which does not
|
|
* support NWAY, this is the register which will tell
|
|
* us the results of parallel detection.
|
|
*/
|
|
case RL_MEDIASTAT:
|
|
rval = CSR_READ_1(sc, RL_MEDIASTAT);
|
|
return (rval);
|
|
default:
|
|
device_printf(sc->rl_dev, "bad phy register\n");
|
|
return (0);
|
|
}
|
|
rval = CSR_READ_2(sc, re8139_reg);
|
|
if (sc->rl_type == RL_8139CPLUS && re8139_reg == RL_BMCR) {
|
|
/* 8139C+ has different bit layout. */
|
|
rval &= ~(BMCR_LOOP | BMCR_ISO);
|
|
}
|
|
return (rval);
|
|
}
|
|
|
|
static int
|
|
re_miibus_writereg(device_t dev, int phy, int reg, int data)
|
|
{
|
|
struct rl_softc *sc;
|
|
u_int16_t re8139_reg = 0;
|
|
int rval = 0;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->rl_type == RL_8169) {
|
|
rval = re_gmii_writereg(dev, phy, reg, data);
|
|
return (rval);
|
|
}
|
|
|
|
switch (reg) {
|
|
case MII_BMCR:
|
|
re8139_reg = RL_BMCR;
|
|
if (sc->rl_type == RL_8139CPLUS) {
|
|
/* 8139C+ has different bit layout. */
|
|
data &= ~(BMCR_LOOP | BMCR_ISO);
|
|
}
|
|
break;
|
|
case MII_BMSR:
|
|
re8139_reg = RL_BMSR;
|
|
break;
|
|
case MII_ANAR:
|
|
re8139_reg = RL_ANAR;
|
|
break;
|
|
case MII_ANER:
|
|
re8139_reg = RL_ANER;
|
|
break;
|
|
case MII_ANLPAR:
|
|
re8139_reg = RL_LPAR;
|
|
break;
|
|
case MII_PHYIDR1:
|
|
case MII_PHYIDR2:
|
|
return (0);
|
|
break;
|
|
default:
|
|
device_printf(sc->rl_dev, "bad phy register\n");
|
|
return (0);
|
|
}
|
|
CSR_WRITE_2(sc, re8139_reg, data);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
re_miibus_statchg(device_t dev)
|
|
{
|
|
struct rl_softc *sc;
|
|
struct ifnet *ifp;
|
|
struct mii_data *mii;
|
|
|
|
sc = device_get_softc(dev);
|
|
mii = device_get_softc(sc->rl_miibus);
|
|
ifp = sc->rl_ifp;
|
|
if (mii == NULL || ifp == NULL ||
|
|
(ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
return;
|
|
|
|
sc->rl_flags &= ~RL_FLAG_LINK;
|
|
if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
|
|
(IFM_ACTIVE | IFM_AVALID)) {
|
|
switch (IFM_SUBTYPE(mii->mii_media_active)) {
|
|
case IFM_10_T:
|
|
case IFM_100_TX:
|
|
sc->rl_flags |= RL_FLAG_LINK;
|
|
break;
|
|
case IFM_1000_T:
|
|
if ((sc->rl_flags & RL_FLAG_FASTETHER) != 0)
|
|
break;
|
|
sc->rl_flags |= RL_FLAG_LINK;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
/*
|
|
* RealTek controllers does not provide any interface to
|
|
* Tx/Rx MACs for resolved speed, duplex and flow-control
|
|
* parameters.
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* Set the RX configuration and 64-bit multicast hash filter.
|
|
*/
|
|
static void
|
|
re_set_rxmode(struct rl_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
uint32_t hashes[2] = { 0, 0 };
|
|
uint32_t h, rxfilt;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->rl_ifp;
|
|
|
|
rxfilt = RL_RXCFG_CONFIG | RL_RXCFG_RX_INDIV | RL_RXCFG_RX_BROAD;
|
|
|
|
if (ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) {
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
rxfilt |= RL_RXCFG_RX_ALLPHYS;
|
|
/*
|
|
* Unlike other hardwares, we have to explicitly set
|
|
* RL_RXCFG_RX_MULTI to receive multicast frames in
|
|
* promiscuous mode.
|
|
*/
|
|
rxfilt |= RL_RXCFG_RX_MULTI;
|
|
hashes[0] = hashes[1] = 0xffffffff;
|
|
goto done;
|
|
}
|
|
|
|
if_maddr_rlock(ifp);
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
|
|
ifma->ifma_addr), ETHER_ADDR_LEN) >> 26;
|
|
if (h < 32)
|
|
hashes[0] |= (1 << h);
|
|
else
|
|
hashes[1] |= (1 << (h - 32));
|
|
}
|
|
if_maddr_runlock(ifp);
|
|
|
|
if (hashes[0] != 0 || hashes[1] != 0) {
|
|
/*
|
|
* For some unfathomable reason, RealTek decided to
|
|
* reverse the order of the multicast hash registers
|
|
* in the PCI Express parts. This means we have to
|
|
* write the hash pattern in reverse order for those
|
|
* devices.
|
|
*/
|
|
if ((sc->rl_flags & RL_FLAG_PCIE) != 0) {
|
|
h = bswap32(hashes[0]);
|
|
hashes[0] = bswap32(hashes[1]);
|
|
hashes[1] = h;
|
|
}
|
|
rxfilt |= RL_RXCFG_RX_MULTI;
|
|
}
|
|
|
|
done:
|
|
CSR_WRITE_4(sc, RL_MAR0, hashes[0]);
|
|
CSR_WRITE_4(sc, RL_MAR4, hashes[1]);
|
|
CSR_WRITE_4(sc, RL_RXCFG, rxfilt);
|
|
}
|
|
|
|
static void
|
|
re_reset(struct rl_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RESET);
|
|
|
|
for (i = 0; i < RL_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (!(CSR_READ_1(sc, RL_COMMAND) & RL_CMD_RESET))
|
|
break;
|
|
}
|
|
if (i == RL_TIMEOUT)
|
|
device_printf(sc->rl_dev, "reset never completed!\n");
|
|
|
|
if ((sc->rl_flags & RL_FLAG_MACRESET) != 0)
|
|
CSR_WRITE_1(sc, 0x82, 1);
|
|
if (sc->rl_hwrev == RL_HWREV_8169S)
|
|
re_gmii_writereg(sc->rl_dev, 1, 0x0b, 0);
|
|
}
|
|
|
|
#ifdef RE_DIAG
|
|
|
|
/*
|
|
* The following routine is designed to test for a defect on some
|
|
* 32-bit 8169 cards. Some of these NICs have the REQ64# and ACK64#
|
|
* lines connected to the bus, however for a 32-bit only card, they
|
|
* should be pulled high. The result of this defect is that the
|
|
* NIC will not work right if you plug it into a 64-bit slot: DMA
|
|
* operations will be done with 64-bit transfers, which will fail
|
|
* because the 64-bit data lines aren't connected.
|
|
*
|
|
* There's no way to work around this (short of talking a soldering
|
|
* iron to the board), however we can detect it. The method we use
|
|
* here is to put the NIC into digital loopback mode, set the receiver
|
|
* to promiscuous mode, and then try to send a frame. We then compare
|
|
* the frame data we sent to what was received. If the data matches,
|
|
* then the NIC is working correctly, otherwise we know the user has
|
|
* a defective NIC which has been mistakenly plugged into a 64-bit PCI
|
|
* slot. In the latter case, there's no way the NIC can work correctly,
|
|
* so we print out a message on the console and abort the device attach.
|
|
*/
|
|
|
|
static int
|
|
re_diag(struct rl_softc *sc)
|
|
{
|
|
struct ifnet *ifp = sc->rl_ifp;
|
|
struct mbuf *m0;
|
|
struct ether_header *eh;
|
|
struct rl_desc *cur_rx;
|
|
u_int16_t status;
|
|
u_int32_t rxstat;
|
|
int total_len, i, error = 0, phyaddr;
|
|
u_int8_t dst[] = { 0x00, 'h', 'e', 'l', 'l', 'o' };
|
|
u_int8_t src[] = { 0x00, 'w', 'o', 'r', 'l', 'd' };
|
|
|
|
/* Allocate a single mbuf */
|
|
MGETHDR(m0, M_DONTWAIT, MT_DATA);
|
|
if (m0 == NULL)
|
|
return (ENOBUFS);
|
|
|
|
RL_LOCK(sc);
|
|
|
|
/*
|
|
* Initialize the NIC in test mode. This sets the chip up
|
|
* so that it can send and receive frames, but performs the
|
|
* following special functions:
|
|
* - Puts receiver in promiscuous mode
|
|
* - Enables digital loopback mode
|
|
* - Leaves interrupts turned off
|
|
*/
|
|
|
|
ifp->if_flags |= IFF_PROMISC;
|
|
sc->rl_testmode = 1;
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
re_init_locked(sc);
|
|
sc->rl_flags |= RL_FLAG_LINK;
|
|
if (sc->rl_type == RL_8169)
|
|
phyaddr = 1;
|
|
else
|
|
phyaddr = 0;
|
|
|
|
re_miibus_writereg(sc->rl_dev, phyaddr, MII_BMCR, BMCR_RESET);
|
|
for (i = 0; i < RL_TIMEOUT; i++) {
|
|
status = re_miibus_readreg(sc->rl_dev, phyaddr, MII_BMCR);
|
|
if (!(status & BMCR_RESET))
|
|
break;
|
|
}
|
|
|
|
re_miibus_writereg(sc->rl_dev, phyaddr, MII_BMCR, BMCR_LOOP);
|
|
CSR_WRITE_2(sc, RL_ISR, RL_INTRS);
|
|
|
|
DELAY(100000);
|
|
|
|
/* Put some data in the mbuf */
|
|
|
|
eh = mtod(m0, struct ether_header *);
|
|
bcopy ((char *)&dst, eh->ether_dhost, ETHER_ADDR_LEN);
|
|
bcopy ((char *)&src, eh->ether_shost, ETHER_ADDR_LEN);
|
|
eh->ether_type = htons(ETHERTYPE_IP);
|
|
m0->m_pkthdr.len = m0->m_len = ETHER_MIN_LEN - ETHER_CRC_LEN;
|
|
|
|
/*
|
|
* Queue the packet, start transmission.
|
|
* Note: IF_HANDOFF() ultimately calls re_start() for us.
|
|
*/
|
|
|
|
CSR_WRITE_2(sc, RL_ISR, 0xFFFF);
|
|
RL_UNLOCK(sc);
|
|
/* XXX: re_diag must not be called when in ALTQ mode */
|
|
IF_HANDOFF(&ifp->if_snd, m0, ifp);
|
|
RL_LOCK(sc);
|
|
m0 = NULL;
|
|
|
|
/* Wait for it to propagate through the chip */
|
|
|
|
DELAY(100000);
|
|
for (i = 0; i < RL_TIMEOUT; i++) {
|
|
status = CSR_READ_2(sc, RL_ISR);
|
|
CSR_WRITE_2(sc, RL_ISR, status);
|
|
if ((status & (RL_ISR_TIMEOUT_EXPIRED|RL_ISR_RX_OK)) ==
|
|
(RL_ISR_TIMEOUT_EXPIRED|RL_ISR_RX_OK))
|
|
break;
|
|
DELAY(10);
|
|
}
|
|
|
|
if (i == RL_TIMEOUT) {
|
|
device_printf(sc->rl_dev,
|
|
"diagnostic failed, failed to receive packet in"
|
|
" loopback mode\n");
|
|
error = EIO;
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* The packet should have been dumped into the first
|
|
* entry in the RX DMA ring. Grab it from there.
|
|
*/
|
|
|
|
bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
|
|
sc->rl_ldata.rl_rx_list_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag,
|
|
sc->rl_ldata.rl_rx_desc[0].rx_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag,
|
|
sc->rl_ldata.rl_rx_desc[0].rx_dmamap);
|
|
|
|
m0 = sc->rl_ldata.rl_rx_desc[0].rx_m;
|
|
sc->rl_ldata.rl_rx_desc[0].rx_m = NULL;
|
|
eh = mtod(m0, struct ether_header *);
|
|
|
|
cur_rx = &sc->rl_ldata.rl_rx_list[0];
|
|
total_len = RL_RXBYTES(cur_rx);
|
|
rxstat = le32toh(cur_rx->rl_cmdstat);
|
|
|
|
if (total_len != ETHER_MIN_LEN) {
|
|
device_printf(sc->rl_dev,
|
|
"diagnostic failed, received short packet\n");
|
|
error = EIO;
|
|
goto done;
|
|
}
|
|
|
|
/* Test that the received packet data matches what we sent. */
|
|
|
|
if (bcmp((char *)&eh->ether_dhost, (char *)&dst, ETHER_ADDR_LEN) ||
|
|
bcmp((char *)&eh->ether_shost, (char *)&src, ETHER_ADDR_LEN) ||
|
|
ntohs(eh->ether_type) != ETHERTYPE_IP) {
|
|
device_printf(sc->rl_dev, "WARNING, DMA FAILURE!\n");
|
|
device_printf(sc->rl_dev, "expected TX data: %6D/%6D/0x%x\n",
|
|
dst, ":", src, ":", ETHERTYPE_IP);
|
|
device_printf(sc->rl_dev, "received RX data: %6D/%6D/0x%x\n",
|
|
eh->ether_dhost, ":", eh->ether_shost, ":",
|
|
ntohs(eh->ether_type));
|
|
device_printf(sc->rl_dev, "You may have a defective 32-bit "
|
|
"NIC plugged into a 64-bit PCI slot.\n");
|
|
device_printf(sc->rl_dev, "Please re-install the NIC in a "
|
|
"32-bit slot for proper operation.\n");
|
|
device_printf(sc->rl_dev, "Read the re(4) man page for more "
|
|
"details.\n");
|
|
error = EIO;
|
|
}
|
|
|
|
done:
|
|
/* Turn interface off, release resources */
|
|
|
|
sc->rl_testmode = 0;
|
|
sc->rl_flags &= ~RL_FLAG_LINK;
|
|
ifp->if_flags &= ~IFF_PROMISC;
|
|
re_stop(sc);
|
|
if (m0 != NULL)
|
|
m_freem(m0);
|
|
|
|
RL_UNLOCK(sc);
|
|
|
|
return (error);
|
|
}
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Probe for a RealTek 8139C+/8169/8110 chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
*/
|
|
static int
|
|
re_probe(device_t dev)
|
|
{
|
|
struct rl_type *t;
|
|
uint16_t devid, vendor;
|
|
uint16_t revid, sdevid;
|
|
int i;
|
|
|
|
vendor = pci_get_vendor(dev);
|
|
devid = pci_get_device(dev);
|
|
revid = pci_get_revid(dev);
|
|
sdevid = pci_get_subdevice(dev);
|
|
|
|
if (vendor == LINKSYS_VENDORID && devid == LINKSYS_DEVICEID_EG1032) {
|
|
if (sdevid != LINKSYS_SUBDEVICE_EG1032_REV3) {
|
|
/*
|
|
* Only attach to rev. 3 of the Linksys EG1032 adapter.
|
|
* Rev. 2 is supported by sk(4).
|
|
*/
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
|
|
if (vendor == RT_VENDORID && devid == RT_DEVICEID_8139) {
|
|
if (revid != 0x20) {
|
|
/* 8139, let rl(4) take care of this device. */
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
|
|
t = re_devs;
|
|
for (i = 0; i < sizeof(re_devs) / sizeof(re_devs[0]); i++, t++) {
|
|
if (vendor == t->rl_vid && devid == t->rl_did) {
|
|
device_set_desc(dev, t->rl_name);
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
}
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Map a single buffer address.
|
|
*/
|
|
|
|
static void
|
|
re_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
bus_addr_t *addr;
|
|
|
|
if (error)
|
|
return;
|
|
|
|
KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
|
|
addr = arg;
|
|
*addr = segs->ds_addr;
|
|
}
|
|
|
|
static int
|
|
re_allocmem(device_t dev, struct rl_softc *sc)
|
|
{
|
|
bus_addr_t lowaddr;
|
|
bus_size_t rx_list_size, tx_list_size;
|
|
int error;
|
|
int i;
|
|
|
|
rx_list_size = sc->rl_ldata.rl_rx_desc_cnt * sizeof(struct rl_desc);
|
|
tx_list_size = sc->rl_ldata.rl_tx_desc_cnt * sizeof(struct rl_desc);
|
|
|
|
/*
|
|
* Allocate the parent bus DMA tag appropriate for PCI.
|
|
* In order to use DAC, RL_CPLUSCMD_PCI_DAC bit of RL_CPLUS_CMD
|
|
* register should be set. However some RealTek chips are known
|
|
* to be buggy on DAC handling, therefore disable DAC by limiting
|
|
* DMA address space to 32bit. PCIe variants of RealTek chips
|
|
* may not have the limitation.
|
|
*/
|
|
lowaddr = BUS_SPACE_MAXADDR;
|
|
if ((sc->rl_flags & RL_FLAG_PCIE) == 0)
|
|
lowaddr = BUS_SPACE_MAXADDR_32BIT;
|
|
error = bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0,
|
|
lowaddr, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0,
|
|
NULL, NULL, &sc->rl_parent_tag);
|
|
if (error) {
|
|
device_printf(dev, "could not allocate parent DMA tag\n");
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Allocate map for TX mbufs.
|
|
*/
|
|
error = bus_dma_tag_create(sc->rl_parent_tag, 1, 0,
|
|
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL,
|
|
NULL, MCLBYTES * RL_NTXSEGS, RL_NTXSEGS, 4096, 0,
|
|
NULL, NULL, &sc->rl_ldata.rl_tx_mtag);
|
|
if (error) {
|
|
device_printf(dev, "could not allocate TX DMA tag\n");
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Allocate map for RX mbufs.
|
|
*/
|
|
|
|
error = bus_dma_tag_create(sc->rl_parent_tag, sizeof(uint64_t), 0,
|
|
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
MCLBYTES, 1, MCLBYTES, 0, NULL, NULL, &sc->rl_ldata.rl_rx_mtag);
|
|
if (error) {
|
|
device_printf(dev, "could not allocate RX DMA tag\n");
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Allocate map for TX descriptor list.
|
|
*/
|
|
error = bus_dma_tag_create(sc->rl_parent_tag, RL_RING_ALIGN,
|
|
0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL,
|
|
NULL, tx_list_size, 1, tx_list_size, 0,
|
|
NULL, NULL, &sc->rl_ldata.rl_tx_list_tag);
|
|
if (error) {
|
|
device_printf(dev, "could not allocate TX DMA ring tag\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Allocate DMA'able memory for the TX ring */
|
|
|
|
error = bus_dmamem_alloc(sc->rl_ldata.rl_tx_list_tag,
|
|
(void **)&sc->rl_ldata.rl_tx_list,
|
|
BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO,
|
|
&sc->rl_ldata.rl_tx_list_map);
|
|
if (error) {
|
|
device_printf(dev, "could not allocate TX DMA ring\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Load the map for the TX ring. */
|
|
|
|
sc->rl_ldata.rl_tx_list_addr = 0;
|
|
error = bus_dmamap_load(sc->rl_ldata.rl_tx_list_tag,
|
|
sc->rl_ldata.rl_tx_list_map, sc->rl_ldata.rl_tx_list,
|
|
tx_list_size, re_dma_map_addr,
|
|
&sc->rl_ldata.rl_tx_list_addr, BUS_DMA_NOWAIT);
|
|
if (error != 0 || sc->rl_ldata.rl_tx_list_addr == 0) {
|
|
device_printf(dev, "could not load TX DMA ring\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/* Create DMA maps for TX buffers */
|
|
|
|
for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) {
|
|
error = bus_dmamap_create(sc->rl_ldata.rl_tx_mtag, 0,
|
|
&sc->rl_ldata.rl_tx_desc[i].tx_dmamap);
|
|
if (error) {
|
|
device_printf(dev, "could not create DMA map for TX\n");
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Allocate map for RX descriptor list.
|
|
*/
|
|
error = bus_dma_tag_create(sc->rl_parent_tag, RL_RING_ALIGN,
|
|
0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL,
|
|
NULL, rx_list_size, 1, rx_list_size, 0,
|
|
NULL, NULL, &sc->rl_ldata.rl_rx_list_tag);
|
|
if (error) {
|
|
device_printf(dev, "could not create RX DMA ring tag\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Allocate DMA'able memory for the RX ring */
|
|
|
|
error = bus_dmamem_alloc(sc->rl_ldata.rl_rx_list_tag,
|
|
(void **)&sc->rl_ldata.rl_rx_list,
|
|
BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO,
|
|
&sc->rl_ldata.rl_rx_list_map);
|
|
if (error) {
|
|
device_printf(dev, "could not allocate RX DMA ring\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Load the map for the RX ring. */
|
|
|
|
sc->rl_ldata.rl_rx_list_addr = 0;
|
|
error = bus_dmamap_load(sc->rl_ldata.rl_rx_list_tag,
|
|
sc->rl_ldata.rl_rx_list_map, sc->rl_ldata.rl_rx_list,
|
|
rx_list_size, re_dma_map_addr,
|
|
&sc->rl_ldata.rl_rx_list_addr, BUS_DMA_NOWAIT);
|
|
if (error != 0 || sc->rl_ldata.rl_rx_list_addr == 0) {
|
|
device_printf(dev, "could not load RX DMA ring\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/* Create DMA maps for RX buffers */
|
|
|
|
error = bus_dmamap_create(sc->rl_ldata.rl_rx_mtag, 0,
|
|
&sc->rl_ldata.rl_rx_sparemap);
|
|
if (error) {
|
|
device_printf(dev, "could not create spare DMA map for RX\n");
|
|
return (error);
|
|
}
|
|
for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
|
|
error = bus_dmamap_create(sc->rl_ldata.rl_rx_mtag, 0,
|
|
&sc->rl_ldata.rl_rx_desc[i].rx_dmamap);
|
|
if (error) {
|
|
device_printf(dev, "could not create DMA map for RX\n");
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static int
|
|
re_attach(device_t dev)
|
|
{
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
u_int16_t as[ETHER_ADDR_LEN / 2];
|
|
struct rl_softc *sc;
|
|
struct ifnet *ifp;
|
|
struct rl_hwrev *hw_rev;
|
|
int hwrev;
|
|
u_int16_t devid, re_did = 0;
|
|
int error = 0, i, phy, rid;
|
|
int msic, reg;
|
|
uint8_t cfg;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->rl_dev = dev;
|
|
|
|
mtx_init(&sc->rl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF);
|
|
callout_init_mtx(&sc->rl_stat_callout, &sc->rl_mtx, 0);
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
pci_enable_busmaster(dev);
|
|
|
|
devid = pci_get_device(dev);
|
|
/*
|
|
* Prefer memory space register mapping over IO space.
|
|
* Because RTL8169SC does not seem to work when memory mapping
|
|
* is used always activate io mapping.
|
|
*/
|
|
if (devid == RT_DEVICEID_8169SC)
|
|
prefer_iomap = 1;
|
|
if (prefer_iomap == 0) {
|
|
sc->rl_res_id = PCIR_BAR(1);
|
|
sc->rl_res_type = SYS_RES_MEMORY;
|
|
/* RTL8168/8101E seems to use different BARs. */
|
|
if (devid == RT_DEVICEID_8168 || devid == RT_DEVICEID_8101E)
|
|
sc->rl_res_id = PCIR_BAR(2);
|
|
} else {
|
|
sc->rl_res_id = PCIR_BAR(0);
|
|
sc->rl_res_type = SYS_RES_IOPORT;
|
|
}
|
|
sc->rl_res = bus_alloc_resource_any(dev, sc->rl_res_type,
|
|
&sc->rl_res_id, RF_ACTIVE);
|
|
if (sc->rl_res == NULL && prefer_iomap == 0) {
|
|
sc->rl_res_id = PCIR_BAR(0);
|
|
sc->rl_res_type = SYS_RES_IOPORT;
|
|
sc->rl_res = bus_alloc_resource_any(dev, sc->rl_res_type,
|
|
&sc->rl_res_id, RF_ACTIVE);
|
|
}
|
|
if (sc->rl_res == NULL) {
|
|
device_printf(dev, "couldn't map ports/memory\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
sc->rl_btag = rman_get_bustag(sc->rl_res);
|
|
sc->rl_bhandle = rman_get_bushandle(sc->rl_res);
|
|
|
|
msic = 0;
|
|
if (pci_find_extcap(dev, PCIY_EXPRESS, ®) == 0) {
|
|
sc->rl_flags |= RL_FLAG_PCIE;
|
|
if (devid != RT_DEVICEID_8101E) {
|
|
/* Set PCIe maximum read request size to 2048. */
|
|
if (pci_get_max_read_req(dev) < 2048)
|
|
pci_set_max_read_req(dev, 2048);
|
|
}
|
|
msic = pci_msi_count(dev);
|
|
if (bootverbose)
|
|
device_printf(dev, "MSI count : %d\n", msic);
|
|
}
|
|
if (msic > 0 && msi_disable == 0) {
|
|
msic = 1;
|
|
if (pci_alloc_msi(dev, &msic) == 0) {
|
|
if (msic == RL_MSI_MESSAGES) {
|
|
device_printf(dev, "Using %d MSI messages\n",
|
|
msic);
|
|
sc->rl_flags |= RL_FLAG_MSI;
|
|
/* Explicitly set MSI enable bit. */
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE);
|
|
cfg = CSR_READ_1(sc, RL_CFG2);
|
|
cfg |= RL_CFG2_MSI;
|
|
CSR_WRITE_1(sc, RL_CFG2, cfg);
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);
|
|
} else
|
|
pci_release_msi(dev);
|
|
}
|
|
}
|
|
|
|
/* Allocate interrupt */
|
|
if ((sc->rl_flags & RL_FLAG_MSI) == 0) {
|
|
rid = 0;
|
|
sc->rl_irq[0] = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (sc->rl_irq[0] == NULL) {
|
|
device_printf(dev, "couldn't allocate IRQ resources\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
} else {
|
|
for (i = 0, rid = 1; i < RL_MSI_MESSAGES; i++, rid++) {
|
|
sc->rl_irq[i] = bus_alloc_resource_any(dev,
|
|
SYS_RES_IRQ, &rid, RF_ACTIVE);
|
|
if (sc->rl_irq[i] == NULL) {
|
|
device_printf(dev,
|
|
"couldn't llocate IRQ resources for "
|
|
"message %d\n", rid);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((sc->rl_flags & RL_FLAG_MSI) == 0) {
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE);
|
|
cfg = CSR_READ_1(sc, RL_CFG2);
|
|
if ((cfg & RL_CFG2_MSI) != 0) {
|
|
device_printf(dev, "turning off MSI enable bit.\n");
|
|
cfg &= ~RL_CFG2_MSI;
|
|
CSR_WRITE_1(sc, RL_CFG2, cfg);
|
|
}
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);
|
|
}
|
|
|
|
/* Reset the adapter. */
|
|
RL_LOCK(sc);
|
|
re_reset(sc);
|
|
RL_UNLOCK(sc);
|
|
|
|
hw_rev = re_hwrevs;
|
|
hwrev = CSR_READ_4(sc, RL_TXCFG);
|
|
switch (hwrev & 0x70000000) {
|
|
case 0x00000000:
|
|
case 0x10000000:
|
|
device_printf(dev, "Chip rev. 0x%08x\n", hwrev & 0xfc800000);
|
|
hwrev &= (RL_TXCFG_HWREV | 0x80000000);
|
|
break;
|
|
default:
|
|
device_printf(dev, "Chip rev. 0x%08x\n", hwrev & 0x7c800000);
|
|
hwrev &= RL_TXCFG_HWREV;
|
|
break;
|
|
}
|
|
device_printf(dev, "MAC rev. 0x%08x\n", hwrev & 0x00700000);
|
|
while (hw_rev->rl_desc != NULL) {
|
|
if (hw_rev->rl_rev == hwrev) {
|
|
sc->rl_type = hw_rev->rl_type;
|
|
sc->rl_hwrev = hw_rev->rl_rev;
|
|
break;
|
|
}
|
|
hw_rev++;
|
|
}
|
|
if (hw_rev->rl_desc == NULL) {
|
|
device_printf(dev, "Unknown H/W revision: 0x%08x\n", hwrev);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
switch (hw_rev->rl_rev) {
|
|
case RL_HWREV_8139CPLUS:
|
|
sc->rl_flags |= RL_FLAG_NOJUMBO | RL_FLAG_FASTETHER |
|
|
RL_FLAG_AUTOPAD;
|
|
break;
|
|
case RL_HWREV_8100E:
|
|
case RL_HWREV_8101E:
|
|
sc->rl_flags |= RL_FLAG_NOJUMBO | RL_FLAG_PHYWAKE |
|
|
RL_FLAG_FASTETHER;
|
|
break;
|
|
case RL_HWREV_8102E:
|
|
case RL_HWREV_8102EL:
|
|
case RL_HWREV_8102EL_SPIN1:
|
|
sc->rl_flags |= RL_FLAG_NOJUMBO | RL_FLAG_PHYWAKE |
|
|
RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT |
|
|
RL_FLAG_FASTETHER | RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD;
|
|
break;
|
|
case RL_HWREV_8103E:
|
|
sc->rl_flags |= RL_FLAG_NOJUMBO | RL_FLAG_PHYWAKE |
|
|
RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT |
|
|
RL_FLAG_FASTETHER | RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD |
|
|
RL_FLAG_MACSLEEP;
|
|
break;
|
|
case RL_HWREV_8168_SPIN1:
|
|
case RL_HWREV_8168_SPIN2:
|
|
sc->rl_flags |= RL_FLAG_WOLRXENB;
|
|
/* FALLTHROUGH */
|
|
case RL_HWREV_8168_SPIN3:
|
|
sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_MACSTAT;
|
|
break;
|
|
case RL_HWREV_8168C_SPIN2:
|
|
sc->rl_flags |= RL_FLAG_MACSLEEP;
|
|
/* FALLTHROUGH */
|
|
case RL_HWREV_8168C:
|
|
if ((hwrev & 0x00700000) == 0x00200000)
|
|
sc->rl_flags |= RL_FLAG_MACSLEEP;
|
|
/* FALLTHROUGH */
|
|
case RL_HWREV_8168CP:
|
|
case RL_HWREV_8168D:
|
|
case RL_HWREV_8168DP:
|
|
sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR |
|
|
RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP |
|
|
RL_FLAG_AUTOPAD;
|
|
/*
|
|
* These controllers support jumbo frame but it seems
|
|
* that enabling it requires touching additional magic
|
|
* registers. Depending on MAC revisions some
|
|
* controllers need to disable checksum offload. So
|
|
* disable jumbo frame until I have better idea what
|
|
* it really requires to make it support.
|
|
* RTL8168C/CP : supports up to 6KB jumbo frame.
|
|
* RTL8111C/CP : supports up to 9KB jumbo frame.
|
|
*/
|
|
sc->rl_flags |= RL_FLAG_NOJUMBO;
|
|
break;
|
|
case RL_HWREV_8168E:
|
|
sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PHYWAKE_PM |
|
|
RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT |
|
|
RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD | RL_FLAG_NOJUMBO;
|
|
break;
|
|
case RL_HWREV_8169_8110SB:
|
|
case RL_HWREV_8169_8110SBL:
|
|
case RL_HWREV_8169_8110SC:
|
|
case RL_HWREV_8169_8110SCE:
|
|
sc->rl_flags |= RL_FLAG_PHYWAKE;
|
|
/* FALLTHROUGH */
|
|
case RL_HWREV_8169:
|
|
case RL_HWREV_8169S:
|
|
case RL_HWREV_8110S:
|
|
sc->rl_flags |= RL_FLAG_MACRESET;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Enable PME. */
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE);
|
|
cfg = CSR_READ_1(sc, RL_CFG1);
|
|
cfg |= RL_CFG1_PME;
|
|
CSR_WRITE_1(sc, RL_CFG1, cfg);
|
|
cfg = CSR_READ_1(sc, RL_CFG5);
|
|
cfg &= RL_CFG5_PME_STS;
|
|
CSR_WRITE_1(sc, RL_CFG5, cfg);
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);
|
|
|
|
if ((sc->rl_flags & RL_FLAG_PAR) != 0) {
|
|
/*
|
|
* XXX Should have a better way to extract station
|
|
* address from EEPROM.
|
|
*/
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
eaddr[i] = CSR_READ_1(sc, RL_IDR0 + i);
|
|
} else {
|
|
sc->rl_eewidth = RL_9356_ADDR_LEN;
|
|
re_read_eeprom(sc, (caddr_t)&re_did, 0, 1);
|
|
if (re_did != 0x8129)
|
|
sc->rl_eewidth = RL_9346_ADDR_LEN;
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
re_read_eeprom(sc, (caddr_t)as, RL_EE_EADDR, 3);
|
|
for (i = 0; i < ETHER_ADDR_LEN / 2; i++)
|
|
as[i] = le16toh(as[i]);
|
|
bcopy(as, eaddr, sizeof(eaddr));
|
|
}
|
|
|
|
if (sc->rl_type == RL_8169) {
|
|
/* Set RX length mask and number of descriptors. */
|
|
sc->rl_rxlenmask = RL_RDESC_STAT_GFRAGLEN;
|
|
sc->rl_txstart = RL_GTXSTART;
|
|
sc->rl_ldata.rl_tx_desc_cnt = RL_8169_TX_DESC_CNT;
|
|
sc->rl_ldata.rl_rx_desc_cnt = RL_8169_RX_DESC_CNT;
|
|
} else {
|
|
/* Set RX length mask and number of descriptors. */
|
|
sc->rl_rxlenmask = RL_RDESC_STAT_FRAGLEN;
|
|
sc->rl_txstart = RL_TXSTART;
|
|
sc->rl_ldata.rl_tx_desc_cnt = RL_8139_TX_DESC_CNT;
|
|
sc->rl_ldata.rl_rx_desc_cnt = RL_8139_RX_DESC_CNT;
|
|
}
|
|
|
|
error = re_allocmem(dev, sc);
|
|
if (error)
|
|
goto fail;
|
|
|
|
ifp = sc->rl_ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
device_printf(dev, "can not if_alloc()\n");
|
|
error = ENOSPC;
|
|
goto fail;
|
|
}
|
|
|
|
/* Take controller out of deep sleep mode. */
|
|
if ((sc->rl_flags & RL_FLAG_MACSLEEP) != 0) {
|
|
if ((CSR_READ_1(sc, RL_MACDBG) & 0x80) == 0x80)
|
|
CSR_WRITE_1(sc, RL_GPIO,
|
|
CSR_READ_1(sc, RL_GPIO) | 0x01);
|
|
else
|
|
CSR_WRITE_1(sc, RL_GPIO,
|
|
CSR_READ_1(sc, RL_GPIO) & ~0x01);
|
|
}
|
|
|
|
/* Take PHY out of power down mode. */
|
|
if ((sc->rl_flags & RL_FLAG_PHYWAKE_PM) != 0)
|
|
CSR_WRITE_1(sc, RL_PMCH, CSR_READ_1(sc, RL_PMCH) | 0x80);
|
|
if ((sc->rl_flags & RL_FLAG_PHYWAKE) != 0) {
|
|
re_gmii_writereg(dev, 1, 0x1f, 0);
|
|
re_gmii_writereg(dev, 1, 0x0e, 0);
|
|
}
|
|
|
|
#define RE_PHYAD_INTERNAL 0
|
|
|
|
/* Do MII setup. */
|
|
phy = RE_PHYAD_INTERNAL;
|
|
if (sc->rl_type == RL_8169)
|
|
phy = 1;
|
|
error = mii_attach(dev, &sc->rl_miibus, ifp, re_ifmedia_upd,
|
|
re_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY, 0);
|
|
if (error != 0) {
|
|
device_printf(dev, "attaching PHYs failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
ifp->if_softc = sc;
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = re_ioctl;
|
|
ifp->if_start = re_start;
|
|
ifp->if_hwassist = RE_CSUM_FEATURES;
|
|
ifp->if_capabilities = IFCAP_HWCSUM;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
ifp->if_init = re_init;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, RL_IFQ_MAXLEN);
|
|
ifp->if_snd.ifq_drv_maxlen = RL_IFQ_MAXLEN;
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
TASK_INIT(&sc->rl_txtask, 1, re_tx_task, ifp);
|
|
TASK_INIT(&sc->rl_inttask, 0, re_int_task, sc);
|
|
|
|
/*
|
|
* XXX
|
|
* Still have no idea how to make TSO work on 8168C, 8168CP,
|
|
* 8111C and 8111CP.
|
|
*/
|
|
if ((sc->rl_flags & RL_FLAG_DESCV2) == 0) {
|
|
ifp->if_hwassist |= CSUM_TSO;
|
|
ifp->if_capabilities |= IFCAP_TSO4 | IFCAP_VLAN_HWTSO;
|
|
}
|
|
|
|
/*
|
|
* Call MI attach routine.
|
|
*/
|
|
ether_ifattach(ifp, eaddr);
|
|
|
|
/* VLAN capability setup */
|
|
ifp->if_capabilities |= IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING;
|
|
if (ifp->if_capabilities & IFCAP_HWCSUM)
|
|
ifp->if_capabilities |= IFCAP_VLAN_HWCSUM;
|
|
/* Enable WOL if PM is supported. */
|
|
if (pci_find_extcap(sc->rl_dev, PCIY_PMG, ®) == 0)
|
|
ifp->if_capabilities |= IFCAP_WOL;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
/*
|
|
* Don't enable TSO by default. Under certain
|
|
* circumtances the controller generated corrupted
|
|
* packets in TSO size.
|
|
*/
|
|
ifp->if_hwassist &= ~CSUM_TSO;
|
|
ifp->if_capenable &= ~(IFCAP_TSO4 | IFCAP_VLAN_HWTSO);
|
|
#ifdef DEVICE_POLLING
|
|
ifp->if_capabilities |= IFCAP_POLLING;
|
|
#endif
|
|
/*
|
|
* Tell the upper layer(s) we support long frames.
|
|
* Must appear after the call to ether_ifattach() because
|
|
* ether_ifattach() sets ifi_hdrlen to the default value.
|
|
*/
|
|
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
|
|
|
|
#ifdef RE_DIAG
|
|
/*
|
|
* Perform hardware diagnostic on the original RTL8169.
|
|
* Some 32-bit cards were incorrectly wired and would
|
|
* malfunction if plugged into a 64-bit slot.
|
|
*/
|
|
|
|
if (hwrev == RL_HWREV_8169) {
|
|
error = re_diag(sc);
|
|
if (error) {
|
|
device_printf(dev,
|
|
"attach aborted due to hardware diag failure\n");
|
|
ether_ifdetach(ifp);
|
|
goto fail;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Hook interrupt last to avoid having to lock softc */
|
|
if ((sc->rl_flags & RL_FLAG_MSI) == 0)
|
|
error = bus_setup_intr(dev, sc->rl_irq[0],
|
|
INTR_TYPE_NET | INTR_MPSAFE, re_intr, NULL, sc,
|
|
&sc->rl_intrhand[0]);
|
|
else {
|
|
for (i = 0; i < RL_MSI_MESSAGES; i++) {
|
|
error = bus_setup_intr(dev, sc->rl_irq[i],
|
|
INTR_TYPE_NET | INTR_MPSAFE, re_intr, NULL, sc,
|
|
&sc->rl_intrhand[i]);
|
|
if (error != 0)
|
|
break;
|
|
}
|
|
}
|
|
if (error) {
|
|
device_printf(dev, "couldn't set up irq\n");
|
|
ether_ifdetach(ifp);
|
|
}
|
|
|
|
fail:
|
|
|
|
if (error)
|
|
re_detach(dev);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Shutdown hardware and free up resources. This can be called any
|
|
* time after the mutex has been initialized. It is called in both
|
|
* the error case in attach and the normal detach case so it needs
|
|
* to be careful about only freeing resources that have actually been
|
|
* allocated.
|
|
*/
|
|
static int
|
|
re_detach(device_t dev)
|
|
{
|
|
struct rl_softc *sc;
|
|
struct ifnet *ifp;
|
|
int i, rid;
|
|
|
|
sc = device_get_softc(dev);
|
|
ifp = sc->rl_ifp;
|
|
KASSERT(mtx_initialized(&sc->rl_mtx), ("re mutex not initialized"));
|
|
|
|
/* These should only be active if attach succeeded */
|
|
if (device_is_attached(dev)) {
|
|
#ifdef DEVICE_POLLING
|
|
if (ifp->if_capenable & IFCAP_POLLING)
|
|
ether_poll_deregister(ifp);
|
|
#endif
|
|
RL_LOCK(sc);
|
|
#if 0
|
|
sc->suspended = 1;
|
|
#endif
|
|
re_stop(sc);
|
|
RL_UNLOCK(sc);
|
|
callout_drain(&sc->rl_stat_callout);
|
|
taskqueue_drain(taskqueue_fast, &sc->rl_inttask);
|
|
taskqueue_drain(taskqueue_fast, &sc->rl_txtask);
|
|
/*
|
|
* Force off the IFF_UP flag here, in case someone
|
|
* still had a BPF descriptor attached to this
|
|
* interface. If they do, ether_ifdetach() will cause
|
|
* the BPF code to try and clear the promisc mode
|
|
* flag, which will bubble down to re_ioctl(),
|
|
* which will try to call re_init() again. This will
|
|
* turn the NIC back on and restart the MII ticker,
|
|
* which will panic the system when the kernel tries
|
|
* to invoke the re_tick() function that isn't there
|
|
* anymore.
|
|
*/
|
|
ifp->if_flags &= ~IFF_UP;
|
|
ether_ifdetach(ifp);
|
|
}
|
|
if (sc->rl_miibus)
|
|
device_delete_child(dev, sc->rl_miibus);
|
|
bus_generic_detach(dev);
|
|
|
|
/*
|
|
* The rest is resource deallocation, so we should already be
|
|
* stopped here.
|
|
*/
|
|
|
|
for (i = 0; i < RL_MSI_MESSAGES; i++) {
|
|
if (sc->rl_intrhand[i] != NULL) {
|
|
bus_teardown_intr(dev, sc->rl_irq[i],
|
|
sc->rl_intrhand[i]);
|
|
sc->rl_intrhand[i] = NULL;
|
|
}
|
|
}
|
|
if (ifp != NULL)
|
|
if_free(ifp);
|
|
if ((sc->rl_flags & RL_FLAG_MSI) == 0) {
|
|
if (sc->rl_irq[0] != NULL) {
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0,
|
|
sc->rl_irq[0]);
|
|
sc->rl_irq[0] = NULL;
|
|
}
|
|
} else {
|
|
for (i = 0, rid = 1; i < RL_MSI_MESSAGES; i++, rid++) {
|
|
if (sc->rl_irq[i] != NULL) {
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid,
|
|
sc->rl_irq[i]);
|
|
sc->rl_irq[i] = NULL;
|
|
}
|
|
}
|
|
pci_release_msi(dev);
|
|
}
|
|
if (sc->rl_res)
|
|
bus_release_resource(dev, sc->rl_res_type, sc->rl_res_id,
|
|
sc->rl_res);
|
|
|
|
/* Unload and free the RX DMA ring memory and map */
|
|
|
|
if (sc->rl_ldata.rl_rx_list_tag) {
|
|
bus_dmamap_unload(sc->rl_ldata.rl_rx_list_tag,
|
|
sc->rl_ldata.rl_rx_list_map);
|
|
bus_dmamem_free(sc->rl_ldata.rl_rx_list_tag,
|
|
sc->rl_ldata.rl_rx_list,
|
|
sc->rl_ldata.rl_rx_list_map);
|
|
bus_dma_tag_destroy(sc->rl_ldata.rl_rx_list_tag);
|
|
}
|
|
|
|
/* Unload and free the TX DMA ring memory and map */
|
|
|
|
if (sc->rl_ldata.rl_tx_list_tag) {
|
|
bus_dmamap_unload(sc->rl_ldata.rl_tx_list_tag,
|
|
sc->rl_ldata.rl_tx_list_map);
|
|
bus_dmamem_free(sc->rl_ldata.rl_tx_list_tag,
|
|
sc->rl_ldata.rl_tx_list,
|
|
sc->rl_ldata.rl_tx_list_map);
|
|
bus_dma_tag_destroy(sc->rl_ldata.rl_tx_list_tag);
|
|
}
|
|
|
|
/* Destroy all the RX and TX buffer maps */
|
|
|
|
if (sc->rl_ldata.rl_tx_mtag) {
|
|
for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++)
|
|
bus_dmamap_destroy(sc->rl_ldata.rl_tx_mtag,
|
|
sc->rl_ldata.rl_tx_desc[i].tx_dmamap);
|
|
bus_dma_tag_destroy(sc->rl_ldata.rl_tx_mtag);
|
|
}
|
|
if (sc->rl_ldata.rl_rx_mtag) {
|
|
for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++)
|
|
bus_dmamap_destroy(sc->rl_ldata.rl_rx_mtag,
|
|
sc->rl_ldata.rl_rx_desc[i].rx_dmamap);
|
|
if (sc->rl_ldata.rl_rx_sparemap)
|
|
bus_dmamap_destroy(sc->rl_ldata.rl_rx_mtag,
|
|
sc->rl_ldata.rl_rx_sparemap);
|
|
bus_dma_tag_destroy(sc->rl_ldata.rl_rx_mtag);
|
|
}
|
|
|
|
/* Unload and free the stats buffer and map */
|
|
|
|
if (sc->rl_ldata.rl_stag) {
|
|
bus_dmamap_unload(sc->rl_ldata.rl_stag,
|
|
sc->rl_ldata.rl_rx_list_map);
|
|
bus_dmamem_free(sc->rl_ldata.rl_stag,
|
|
sc->rl_ldata.rl_stats,
|
|
sc->rl_ldata.rl_smap);
|
|
bus_dma_tag_destroy(sc->rl_ldata.rl_stag);
|
|
}
|
|
|
|
if (sc->rl_parent_tag)
|
|
bus_dma_tag_destroy(sc->rl_parent_tag);
|
|
|
|
mtx_destroy(&sc->rl_mtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static __inline void
|
|
re_discard_rxbuf(struct rl_softc *sc, int idx)
|
|
{
|
|
struct rl_desc *desc;
|
|
struct rl_rxdesc *rxd;
|
|
uint32_t cmdstat;
|
|
|
|
rxd = &sc->rl_ldata.rl_rx_desc[idx];
|
|
desc = &sc->rl_ldata.rl_rx_list[idx];
|
|
desc->rl_vlanctl = 0;
|
|
cmdstat = rxd->rx_size;
|
|
if (idx == sc->rl_ldata.rl_rx_desc_cnt - 1)
|
|
cmdstat |= RL_RDESC_CMD_EOR;
|
|
desc->rl_cmdstat = htole32(cmdstat | RL_RDESC_CMD_OWN);
|
|
}
|
|
|
|
static int
|
|
re_newbuf(struct rl_softc *sc, int idx)
|
|
{
|
|
struct mbuf *m;
|
|
struct rl_rxdesc *rxd;
|
|
bus_dma_segment_t segs[1];
|
|
bus_dmamap_t map;
|
|
struct rl_desc *desc;
|
|
uint32_t cmdstat;
|
|
int error, nsegs;
|
|
|
|
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
|
|
m->m_len = m->m_pkthdr.len = MCLBYTES;
|
|
#ifdef RE_FIXUP_RX
|
|
/*
|
|
* This is part of an evil trick to deal with non-x86 platforms.
|
|
* The RealTek chip requires RX buffers to be aligned on 64-bit
|
|
* boundaries, but that will hose non-x86 machines. To get around
|
|
* this, we leave some empty space at the start of each buffer
|
|
* and for non-x86 hosts, we copy the buffer back six bytes
|
|
* to achieve word alignment. This is slightly more efficient
|
|
* than allocating a new buffer, copying the contents, and
|
|
* discarding the old buffer.
|
|
*/
|
|
m_adj(m, RE_ETHER_ALIGN);
|
|
#endif
|
|
error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_rx_mtag,
|
|
sc->rl_ldata.rl_rx_sparemap, m, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
m_freem(m);
|
|
return (ENOBUFS);
|
|
}
|
|
KASSERT(nsegs == 1, ("%s: %d segment returned!", __func__, nsegs));
|
|
|
|
rxd = &sc->rl_ldata.rl_rx_desc[idx];
|
|
if (rxd->rx_m != NULL) {
|
|
bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap);
|
|
}
|
|
|
|
rxd->rx_m = m;
|
|
map = rxd->rx_dmamap;
|
|
rxd->rx_dmamap = sc->rl_ldata.rl_rx_sparemap;
|
|
rxd->rx_size = segs[0].ds_len;
|
|
sc->rl_ldata.rl_rx_sparemap = map;
|
|
bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap,
|
|
BUS_DMASYNC_PREREAD);
|
|
|
|
desc = &sc->rl_ldata.rl_rx_list[idx];
|
|
desc->rl_vlanctl = 0;
|
|
desc->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[0].ds_addr));
|
|
desc->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[0].ds_addr));
|
|
cmdstat = segs[0].ds_len;
|
|
if (idx == sc->rl_ldata.rl_rx_desc_cnt - 1)
|
|
cmdstat |= RL_RDESC_CMD_EOR;
|
|
desc->rl_cmdstat = htole32(cmdstat | RL_RDESC_CMD_OWN);
|
|
|
|
return (0);
|
|
}
|
|
|
|
#ifdef RE_FIXUP_RX
|
|
static __inline void
|
|
re_fixup_rx(struct mbuf *m)
|
|
{
|
|
int i;
|
|
uint16_t *src, *dst;
|
|
|
|
src = mtod(m, uint16_t *);
|
|
dst = src - (RE_ETHER_ALIGN - ETHER_ALIGN) / sizeof *src;
|
|
|
|
for (i = 0; i < (m->m_len / sizeof(uint16_t) + 1); i++)
|
|
*dst++ = *src++;
|
|
|
|
m->m_data -= RE_ETHER_ALIGN - ETHER_ALIGN;
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
re_tx_list_init(struct rl_softc *sc)
|
|
{
|
|
struct rl_desc *desc;
|
|
int i;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
bzero(sc->rl_ldata.rl_tx_list,
|
|
sc->rl_ldata.rl_tx_desc_cnt * sizeof(struct rl_desc));
|
|
for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++)
|
|
sc->rl_ldata.rl_tx_desc[i].tx_m = NULL;
|
|
/* Set EOR. */
|
|
desc = &sc->rl_ldata.rl_tx_list[sc->rl_ldata.rl_tx_desc_cnt - 1];
|
|
desc->rl_cmdstat |= htole32(RL_TDESC_CMD_EOR);
|
|
|
|
bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag,
|
|
sc->rl_ldata.rl_tx_list_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
sc->rl_ldata.rl_tx_prodidx = 0;
|
|
sc->rl_ldata.rl_tx_considx = 0;
|
|
sc->rl_ldata.rl_tx_free = sc->rl_ldata.rl_tx_desc_cnt;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
re_rx_list_init(struct rl_softc *sc)
|
|
{
|
|
int error, i;
|
|
|
|
bzero(sc->rl_ldata.rl_rx_list,
|
|
sc->rl_ldata.rl_rx_desc_cnt * sizeof(struct rl_desc));
|
|
for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
|
|
sc->rl_ldata.rl_rx_desc[i].rx_m = NULL;
|
|
if ((error = re_newbuf(sc, i)) != 0)
|
|
return (error);
|
|
}
|
|
|
|
/* Flush the RX descriptors */
|
|
|
|
bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
|
|
sc->rl_ldata.rl_rx_list_map,
|
|
BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
|
|
|
|
sc->rl_ldata.rl_rx_prodidx = 0;
|
|
sc->rl_head = sc->rl_tail = NULL;
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* RX handler for C+ and 8169. For the gigE chips, we support
|
|
* the reception of jumbo frames that have been fragmented
|
|
* across multiple 2K mbuf cluster buffers.
|
|
*/
|
|
static int
|
|
re_rxeof(struct rl_softc *sc, int *rx_npktsp)
|
|
{
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
int i, total_len;
|
|
struct rl_desc *cur_rx;
|
|
u_int32_t rxstat, rxvlan;
|
|
int maxpkt = 16, rx_npkts = 0;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->rl_ifp;
|
|
|
|
/* Invalidate the descriptor memory */
|
|
|
|
bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
|
|
sc->rl_ldata.rl_rx_list_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
for (i = sc->rl_ldata.rl_rx_prodidx; maxpkt > 0;
|
|
i = RL_RX_DESC_NXT(sc, i)) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
break;
|
|
cur_rx = &sc->rl_ldata.rl_rx_list[i];
|
|
rxstat = le32toh(cur_rx->rl_cmdstat);
|
|
if ((rxstat & RL_RDESC_STAT_OWN) != 0)
|
|
break;
|
|
total_len = rxstat & sc->rl_rxlenmask;
|
|
rxvlan = le32toh(cur_rx->rl_vlanctl);
|
|
m = sc->rl_ldata.rl_rx_desc[i].rx_m;
|
|
|
|
if (!(rxstat & RL_RDESC_STAT_EOF)) {
|
|
if (re_newbuf(sc, i) != 0) {
|
|
/*
|
|
* If this is part of a multi-fragment packet,
|
|
* discard all the pieces.
|
|
*/
|
|
if (sc->rl_head != NULL) {
|
|
m_freem(sc->rl_head);
|
|
sc->rl_head = sc->rl_tail = NULL;
|
|
}
|
|
re_discard_rxbuf(sc, i);
|
|
continue;
|
|
}
|
|
m->m_len = RE_RX_DESC_BUFLEN;
|
|
if (sc->rl_head == NULL)
|
|
sc->rl_head = sc->rl_tail = m;
|
|
else {
|
|
m->m_flags &= ~M_PKTHDR;
|
|
sc->rl_tail->m_next = m;
|
|
sc->rl_tail = m;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* NOTE: for the 8139C+, the frame length field
|
|
* is always 12 bits in size, but for the gigE chips,
|
|
* it is 13 bits (since the max RX frame length is 16K).
|
|
* Unfortunately, all 32 bits in the status word
|
|
* were already used, so to make room for the extra
|
|
* length bit, RealTek took out the 'frame alignment
|
|
* error' bit and shifted the other status bits
|
|
* over one slot. The OWN, EOR, FS and LS bits are
|
|
* still in the same places. We have already extracted
|
|
* the frame length and checked the OWN bit, so rather
|
|
* than using an alternate bit mapping, we shift the
|
|
* status bits one space to the right so we can evaluate
|
|
* them using the 8169 status as though it was in the
|
|
* same format as that of the 8139C+.
|
|
*/
|
|
if (sc->rl_type == RL_8169)
|
|
rxstat >>= 1;
|
|
|
|
/*
|
|
* if total_len > 2^13-1, both _RXERRSUM and _GIANT will be
|
|
* set, but if CRC is clear, it will still be a valid frame.
|
|
*/
|
|
if (rxstat & RL_RDESC_STAT_RXERRSUM && !(total_len > 8191 &&
|
|
(rxstat & RL_RDESC_STAT_ERRS) == RL_RDESC_STAT_GIANT)) {
|
|
ifp->if_ierrors++;
|
|
/*
|
|
* If this is part of a multi-fragment packet,
|
|
* discard all the pieces.
|
|
*/
|
|
if (sc->rl_head != NULL) {
|
|
m_freem(sc->rl_head);
|
|
sc->rl_head = sc->rl_tail = NULL;
|
|
}
|
|
re_discard_rxbuf(sc, i);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If allocating a replacement mbuf fails,
|
|
* reload the current one.
|
|
*/
|
|
|
|
if (re_newbuf(sc, i) != 0) {
|
|
ifp->if_iqdrops++;
|
|
if (sc->rl_head != NULL) {
|
|
m_freem(sc->rl_head);
|
|
sc->rl_head = sc->rl_tail = NULL;
|
|
}
|
|
re_discard_rxbuf(sc, i);
|
|
continue;
|
|
}
|
|
|
|
if (sc->rl_head != NULL) {
|
|
m->m_len = total_len % RE_RX_DESC_BUFLEN;
|
|
if (m->m_len == 0)
|
|
m->m_len = RE_RX_DESC_BUFLEN;
|
|
/*
|
|
* Special case: if there's 4 bytes or less
|
|
* in this buffer, the mbuf can be discarded:
|
|
* the last 4 bytes is the CRC, which we don't
|
|
* care about anyway.
|
|
*/
|
|
if (m->m_len <= ETHER_CRC_LEN) {
|
|
sc->rl_tail->m_len -=
|
|
(ETHER_CRC_LEN - m->m_len);
|
|
m_freem(m);
|
|
} else {
|
|
m->m_len -= ETHER_CRC_LEN;
|
|
m->m_flags &= ~M_PKTHDR;
|
|
sc->rl_tail->m_next = m;
|
|
}
|
|
m = sc->rl_head;
|
|
sc->rl_head = sc->rl_tail = NULL;
|
|
m->m_pkthdr.len = total_len - ETHER_CRC_LEN;
|
|
} else
|
|
m->m_pkthdr.len = m->m_len =
|
|
(total_len - ETHER_CRC_LEN);
|
|
|
|
#ifdef RE_FIXUP_RX
|
|
re_fixup_rx(m);
|
|
#endif
|
|
ifp->if_ipackets++;
|
|
m->m_pkthdr.rcvif = ifp;
|
|
|
|
/* Do RX checksumming if enabled */
|
|
|
|
if (ifp->if_capenable & IFCAP_RXCSUM) {
|
|
if ((sc->rl_flags & RL_FLAG_DESCV2) == 0) {
|
|
/* Check IP header checksum */
|
|
if (rxstat & RL_RDESC_STAT_PROTOID)
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_IP_CHECKED;
|
|
if (!(rxstat & RL_RDESC_STAT_IPSUMBAD))
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_IP_VALID;
|
|
|
|
/* Check TCP/UDP checksum */
|
|
if ((RL_TCPPKT(rxstat) &&
|
|
!(rxstat & RL_RDESC_STAT_TCPSUMBAD)) ||
|
|
(RL_UDPPKT(rxstat) &&
|
|
!(rxstat & RL_RDESC_STAT_UDPSUMBAD))) {
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_DATA_VALID|CSUM_PSEUDO_HDR;
|
|
m->m_pkthdr.csum_data = 0xffff;
|
|
}
|
|
} else {
|
|
/*
|
|
* RTL8168C/RTL816CP/RTL8111C/RTL8111CP
|
|
*/
|
|
if ((rxstat & RL_RDESC_STAT_PROTOID) &&
|
|
(rxvlan & RL_RDESC_IPV4))
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_IP_CHECKED;
|
|
if (!(rxstat & RL_RDESC_STAT_IPSUMBAD) &&
|
|
(rxvlan & RL_RDESC_IPV4))
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_IP_VALID;
|
|
if (((rxstat & RL_RDESC_STAT_TCP) &&
|
|
!(rxstat & RL_RDESC_STAT_TCPSUMBAD)) ||
|
|
((rxstat & RL_RDESC_STAT_UDP) &&
|
|
!(rxstat & RL_RDESC_STAT_UDPSUMBAD))) {
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_DATA_VALID|CSUM_PSEUDO_HDR;
|
|
m->m_pkthdr.csum_data = 0xffff;
|
|
}
|
|
}
|
|
}
|
|
maxpkt--;
|
|
if (rxvlan & RL_RDESC_VLANCTL_TAG) {
|
|
m->m_pkthdr.ether_vtag =
|
|
bswap16((rxvlan & RL_RDESC_VLANCTL_DATA));
|
|
m->m_flags |= M_VLANTAG;
|
|
}
|
|
RL_UNLOCK(sc);
|
|
(*ifp->if_input)(ifp, m);
|
|
RL_LOCK(sc);
|
|
rx_npkts++;
|
|
}
|
|
|
|
/* Flush the RX DMA ring */
|
|
|
|
bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
|
|
sc->rl_ldata.rl_rx_list_map,
|
|
BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
|
|
|
|
sc->rl_ldata.rl_rx_prodidx = i;
|
|
|
|
if (rx_npktsp != NULL)
|
|
*rx_npktsp = rx_npkts;
|
|
if (maxpkt)
|
|
return(EAGAIN);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static void
|
|
re_txeof(struct rl_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct rl_txdesc *txd;
|
|
u_int32_t txstat;
|
|
int cons;
|
|
|
|
cons = sc->rl_ldata.rl_tx_considx;
|
|
if (cons == sc->rl_ldata.rl_tx_prodidx)
|
|
return;
|
|
|
|
ifp = sc->rl_ifp;
|
|
/* Invalidate the TX descriptor list */
|
|
bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag,
|
|
sc->rl_ldata.rl_tx_list_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
for (; cons != sc->rl_ldata.rl_tx_prodidx;
|
|
cons = RL_TX_DESC_NXT(sc, cons)) {
|
|
txstat = le32toh(sc->rl_ldata.rl_tx_list[cons].rl_cmdstat);
|
|
if (txstat & RL_TDESC_STAT_OWN)
|
|
break;
|
|
/*
|
|
* We only stash mbufs in the last descriptor
|
|
* in a fragment chain, which also happens to
|
|
* be the only place where the TX status bits
|
|
* are valid.
|
|
*/
|
|
if (txstat & RL_TDESC_CMD_EOF) {
|
|
txd = &sc->rl_ldata.rl_tx_desc[cons];
|
|
bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag,
|
|
txd->tx_dmamap, BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag,
|
|
txd->tx_dmamap);
|
|
KASSERT(txd->tx_m != NULL,
|
|
("%s: freeing NULL mbufs!", __func__));
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
if (txstat & (RL_TDESC_STAT_EXCESSCOL|
|
|
RL_TDESC_STAT_COLCNT))
|
|
ifp->if_collisions++;
|
|
if (txstat & RL_TDESC_STAT_TXERRSUM)
|
|
ifp->if_oerrors++;
|
|
else
|
|
ifp->if_opackets++;
|
|
}
|
|
sc->rl_ldata.rl_tx_free++;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
}
|
|
sc->rl_ldata.rl_tx_considx = cons;
|
|
|
|
/* No changes made to the TX ring, so no flush needed */
|
|
|
|
if (sc->rl_ldata.rl_tx_free != sc->rl_ldata.rl_tx_desc_cnt) {
|
|
#ifdef RE_TX_MODERATION
|
|
/*
|
|
* If not all descriptors have been reaped yet, reload
|
|
* the timer so that we will eventually get another
|
|
* interrupt that will cause us to re-enter this routine.
|
|
* This is done in case the transmitter has gone idle.
|
|
*/
|
|
CSR_WRITE_4(sc, RL_TIMERCNT, 1);
|
|
#endif
|
|
} else
|
|
sc->rl_watchdog_timer = 0;
|
|
}
|
|
|
|
static void
|
|
re_tick(void *xsc)
|
|
{
|
|
struct rl_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = xsc;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
mii = device_get_softc(sc->rl_miibus);
|
|
mii_tick(mii);
|
|
if ((sc->rl_flags & RL_FLAG_LINK) == 0)
|
|
re_miibus_statchg(sc->rl_dev);
|
|
/*
|
|
* Reclaim transmitted frames here. Technically it is not
|
|
* necessary to do here but it ensures periodic reclamation
|
|
* regardless of Tx completion interrupt which seems to be
|
|
* lost on PCIe based controllers under certain situations.
|
|
*/
|
|
re_txeof(sc);
|
|
re_watchdog(sc);
|
|
callout_reset(&sc->rl_stat_callout, hz, re_tick, sc);
|
|
}
|
|
|
|
#ifdef DEVICE_POLLING
|
|
static int
|
|
re_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
|
|
{
|
|
struct rl_softc *sc = ifp->if_softc;
|
|
int rx_npkts = 0;
|
|
|
|
RL_LOCK(sc);
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
rx_npkts = re_poll_locked(ifp, cmd, count);
|
|
RL_UNLOCK(sc);
|
|
return (rx_npkts);
|
|
}
|
|
|
|
static int
|
|
re_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count)
|
|
{
|
|
struct rl_softc *sc = ifp->if_softc;
|
|
int rx_npkts;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
sc->rxcycles = count;
|
|
re_rxeof(sc, &rx_npkts);
|
|
re_txeof(sc);
|
|
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_txtask);
|
|
|
|
if (cmd == POLL_AND_CHECK_STATUS) { /* also check status register */
|
|
u_int16_t status;
|
|
|
|
status = CSR_READ_2(sc, RL_ISR);
|
|
if (status == 0xffff)
|
|
return (rx_npkts);
|
|
if (status)
|
|
CSR_WRITE_2(sc, RL_ISR, status);
|
|
if ((status & (RL_ISR_TX_OK | RL_ISR_TX_DESC_UNAVAIL)) &&
|
|
(sc->rl_flags & RL_FLAG_PCIE))
|
|
CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START);
|
|
|
|
/*
|
|
* XXX check behaviour on receiver stalls.
|
|
*/
|
|
|
|
if (status & RL_ISR_SYSTEM_ERR) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
re_init_locked(sc);
|
|
}
|
|
}
|
|
return (rx_npkts);
|
|
}
|
|
#endif /* DEVICE_POLLING */
|
|
|
|
static int
|
|
re_intr(void *arg)
|
|
{
|
|
struct rl_softc *sc;
|
|
uint16_t status;
|
|
|
|
sc = arg;
|
|
|
|
status = CSR_READ_2(sc, RL_ISR);
|
|
if (status == 0xFFFF || (status & RL_INTRS_CPLUS) == 0)
|
|
return (FILTER_STRAY);
|
|
CSR_WRITE_2(sc, RL_IMR, 0);
|
|
|
|
taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_inttask);
|
|
|
|
return (FILTER_HANDLED);
|
|
}
|
|
|
|
static void
|
|
re_int_task(void *arg, int npending)
|
|
{
|
|
struct rl_softc *sc;
|
|
struct ifnet *ifp;
|
|
u_int16_t status;
|
|
int rval = 0;
|
|
|
|
sc = arg;
|
|
ifp = sc->rl_ifp;
|
|
|
|
RL_LOCK(sc);
|
|
|
|
status = CSR_READ_2(sc, RL_ISR);
|
|
CSR_WRITE_2(sc, RL_ISR, status);
|
|
|
|
if (sc->suspended ||
|
|
(ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
|
|
RL_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
#ifdef DEVICE_POLLING
|
|
if (ifp->if_capenable & IFCAP_POLLING) {
|
|
RL_UNLOCK(sc);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
if (status & (RL_ISR_RX_OK|RL_ISR_RX_ERR|RL_ISR_FIFO_OFLOW))
|
|
rval = re_rxeof(sc, NULL);
|
|
|
|
/*
|
|
* Some chips will ignore a second TX request issued
|
|
* while an existing transmission is in progress. If
|
|
* the transmitter goes idle but there are still
|
|
* packets waiting to be sent, we need to restart the
|
|
* channel here to flush them out. This only seems to
|
|
* be required with the PCIe devices.
|
|
*/
|
|
if ((status & (RL_ISR_TX_OK | RL_ISR_TX_DESC_UNAVAIL)) &&
|
|
(sc->rl_flags & RL_FLAG_PCIE))
|
|
CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START);
|
|
if (status & (
|
|
#ifdef RE_TX_MODERATION
|
|
RL_ISR_TIMEOUT_EXPIRED|
|
|
#else
|
|
RL_ISR_TX_OK|
|
|
#endif
|
|
RL_ISR_TX_ERR|RL_ISR_TX_DESC_UNAVAIL))
|
|
re_txeof(sc);
|
|
|
|
if (status & RL_ISR_SYSTEM_ERR) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
re_init_locked(sc);
|
|
}
|
|
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_txtask);
|
|
|
|
RL_UNLOCK(sc);
|
|
|
|
if ((CSR_READ_2(sc, RL_ISR) & RL_INTRS_CPLUS) || rval) {
|
|
taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_inttask);
|
|
return;
|
|
}
|
|
|
|
CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS);
|
|
}
|
|
|
|
static int
|
|
re_encap(struct rl_softc *sc, struct mbuf **m_head)
|
|
{
|
|
struct rl_txdesc *txd, *txd_last;
|
|
bus_dma_segment_t segs[RL_NTXSEGS];
|
|
bus_dmamap_t map;
|
|
struct mbuf *m_new;
|
|
struct rl_desc *desc;
|
|
int nsegs, prod;
|
|
int i, error, ei, si;
|
|
int padlen;
|
|
uint32_t cmdstat, csum_flags, vlanctl;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
M_ASSERTPKTHDR((*m_head));
|
|
|
|
/*
|
|
* With some of the RealTek chips, using the checksum offload
|
|
* support in conjunction with the autopadding feature results
|
|
* in the transmission of corrupt frames. For example, if we
|
|
* need to send a really small IP fragment that's less than 60
|
|
* bytes in size, and IP header checksumming is enabled, the
|
|
* resulting ethernet frame that appears on the wire will
|
|
* have garbled payload. To work around this, if TX IP checksum
|
|
* offload is enabled, we always manually pad short frames out
|
|
* to the minimum ethernet frame size.
|
|
*/
|
|
if ((sc->rl_flags & RL_FLAG_AUTOPAD) == 0 &&
|
|
(*m_head)->m_pkthdr.len < RL_IP4CSUMTX_PADLEN &&
|
|
((*m_head)->m_pkthdr.csum_flags & CSUM_IP) != 0) {
|
|
padlen = RL_MIN_FRAMELEN - (*m_head)->m_pkthdr.len;
|
|
if (M_WRITABLE(*m_head) == 0) {
|
|
/* Get a writable copy. */
|
|
m_new = m_dup(*m_head, M_DONTWAIT);
|
|
m_freem(*m_head);
|
|
if (m_new == NULL) {
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_head = m_new;
|
|
}
|
|
if ((*m_head)->m_next != NULL ||
|
|
M_TRAILINGSPACE(*m_head) < padlen) {
|
|
m_new = m_defrag(*m_head, M_DONTWAIT);
|
|
if (m_new == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
} else
|
|
m_new = *m_head;
|
|
|
|
/*
|
|
* Manually pad short frames, and zero the pad space
|
|
* to avoid leaking data.
|
|
*/
|
|
bzero(mtod(m_new, char *) + m_new->m_pkthdr.len, padlen);
|
|
m_new->m_pkthdr.len += padlen;
|
|
m_new->m_len = m_new->m_pkthdr.len;
|
|
*m_head = m_new;
|
|
}
|
|
|
|
prod = sc->rl_ldata.rl_tx_prodidx;
|
|
txd = &sc->rl_ldata.rl_tx_desc[prod];
|
|
error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap,
|
|
*m_head, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error == EFBIG) {
|
|
m_new = m_collapse(*m_head, M_DONTWAIT, RL_NTXSEGS);
|
|
if (m_new == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_head = m_new;
|
|
error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_tx_mtag,
|
|
txd->tx_dmamap, *m_head, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (error);
|
|
}
|
|
} else if (error != 0)
|
|
return (error);
|
|
if (nsegs == 0) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (EIO);
|
|
}
|
|
|
|
/* Check for number of available descriptors. */
|
|
if (sc->rl_ldata.rl_tx_free - nsegs <= 1) {
|
|
bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap);
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
* Set up checksum offload. Note: checksum offload bits must
|
|
* appear in all descriptors of a multi-descriptor transmit
|
|
* attempt. This is according to testing done with an 8169
|
|
* chip. This is a requirement.
|
|
*/
|
|
vlanctl = 0;
|
|
csum_flags = 0;
|
|
if (((*m_head)->m_pkthdr.csum_flags & CSUM_TSO) != 0)
|
|
csum_flags = RL_TDESC_CMD_LGSEND |
|
|
((uint32_t)(*m_head)->m_pkthdr.tso_segsz <<
|
|
RL_TDESC_CMD_MSSVAL_SHIFT);
|
|
else {
|
|
/*
|
|
* Unconditionally enable IP checksum if TCP or UDP
|
|
* checksum is required. Otherwise, TCP/UDP checksum
|
|
* does't make effects.
|
|
*/
|
|
if (((*m_head)->m_pkthdr.csum_flags & RE_CSUM_FEATURES) != 0) {
|
|
if ((sc->rl_flags & RL_FLAG_DESCV2) == 0) {
|
|
csum_flags |= RL_TDESC_CMD_IPCSUM;
|
|
if (((*m_head)->m_pkthdr.csum_flags &
|
|
CSUM_TCP) != 0)
|
|
csum_flags |= RL_TDESC_CMD_TCPCSUM;
|
|
if (((*m_head)->m_pkthdr.csum_flags &
|
|
CSUM_UDP) != 0)
|
|
csum_flags |= RL_TDESC_CMD_UDPCSUM;
|
|
} else {
|
|
vlanctl |= RL_TDESC_CMD_IPCSUMV2;
|
|
if (((*m_head)->m_pkthdr.csum_flags &
|
|
CSUM_TCP) != 0)
|
|
vlanctl |= RL_TDESC_CMD_TCPCSUMV2;
|
|
if (((*m_head)->m_pkthdr.csum_flags &
|
|
CSUM_UDP) != 0)
|
|
vlanctl |= RL_TDESC_CMD_UDPCSUMV2;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set up hardware VLAN tagging. Note: vlan tag info must
|
|
* appear in all descriptors of a multi-descriptor
|
|
* transmission attempt.
|
|
*/
|
|
if ((*m_head)->m_flags & M_VLANTAG)
|
|
vlanctl |= bswap16((*m_head)->m_pkthdr.ether_vtag) |
|
|
RL_TDESC_VLANCTL_TAG;
|
|
|
|
si = prod;
|
|
for (i = 0; i < nsegs; i++, prod = RL_TX_DESC_NXT(sc, prod)) {
|
|
desc = &sc->rl_ldata.rl_tx_list[prod];
|
|
desc->rl_vlanctl = htole32(vlanctl);
|
|
desc->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[i].ds_addr));
|
|
desc->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[i].ds_addr));
|
|
cmdstat = segs[i].ds_len;
|
|
if (i != 0)
|
|
cmdstat |= RL_TDESC_CMD_OWN;
|
|
if (prod == sc->rl_ldata.rl_tx_desc_cnt - 1)
|
|
cmdstat |= RL_TDESC_CMD_EOR;
|
|
desc->rl_cmdstat = htole32(cmdstat | csum_flags);
|
|
sc->rl_ldata.rl_tx_free--;
|
|
}
|
|
/* Update producer index. */
|
|
sc->rl_ldata.rl_tx_prodidx = prod;
|
|
|
|
/* Set EOF on the last descriptor. */
|
|
ei = RL_TX_DESC_PRV(sc, prod);
|
|
desc = &sc->rl_ldata.rl_tx_list[ei];
|
|
desc->rl_cmdstat |= htole32(RL_TDESC_CMD_EOF);
|
|
|
|
desc = &sc->rl_ldata.rl_tx_list[si];
|
|
/* Set SOF and transfer ownership of packet to the chip. */
|
|
desc->rl_cmdstat |= htole32(RL_TDESC_CMD_OWN | RL_TDESC_CMD_SOF);
|
|
|
|
/*
|
|
* Insure that the map for this transmission
|
|
* is placed at the array index of the last descriptor
|
|
* in this chain. (Swap last and first dmamaps.)
|
|
*/
|
|
txd_last = &sc->rl_ldata.rl_tx_desc[ei];
|
|
map = txd->tx_dmamap;
|
|
txd->tx_dmamap = txd_last->tx_dmamap;
|
|
txd_last->tx_dmamap = map;
|
|
txd_last->tx_m = *m_head;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
re_tx_task(void *arg, int npending)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
ifp = arg;
|
|
re_start(ifp);
|
|
}
|
|
|
|
/*
|
|
* Main transmit routine for C+ and gigE NICs.
|
|
*/
|
|
static void
|
|
re_start(struct ifnet *ifp)
|
|
{
|
|
struct rl_softc *sc;
|
|
struct mbuf *m_head;
|
|
int queued;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
RL_LOCK(sc);
|
|
|
|
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING || (sc->rl_flags & RL_FLAG_LINK) == 0) {
|
|
RL_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
for (queued = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) &&
|
|
sc->rl_ldata.rl_tx_free > 1;) {
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
if (re_encap(sc, &m_head) != 0) {
|
|
if (m_head == NULL)
|
|
break;
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
ETHER_BPF_MTAP(ifp, m_head);
|
|
|
|
queued++;
|
|
}
|
|
|
|
if (queued == 0) {
|
|
#ifdef RE_TX_MODERATION
|
|
if (sc->rl_ldata.rl_tx_free != sc->rl_ldata.rl_tx_desc_cnt)
|
|
CSR_WRITE_4(sc, RL_TIMERCNT, 1);
|
|
#endif
|
|
RL_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/* Flush the TX descriptors */
|
|
|
|
bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag,
|
|
sc->rl_ldata.rl_tx_list_map,
|
|
BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
|
|
|
|
CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START);
|
|
|
|
#ifdef RE_TX_MODERATION
|
|
/*
|
|
* Use the countdown timer for interrupt moderation.
|
|
* 'TX done' interrupts are disabled. Instead, we reset the
|
|
* countdown timer, which will begin counting until it hits
|
|
* the value in the TIMERINT register, and then trigger an
|
|
* interrupt. Each time we write to the TIMERCNT register,
|
|
* the timer count is reset to 0.
|
|
*/
|
|
CSR_WRITE_4(sc, RL_TIMERCNT, 1);
|
|
#endif
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
sc->rl_watchdog_timer = 5;
|
|
|
|
RL_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
re_init(void *xsc)
|
|
{
|
|
struct rl_softc *sc = xsc;
|
|
|
|
RL_LOCK(sc);
|
|
re_init_locked(sc);
|
|
RL_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
re_init_locked(struct rl_softc *sc)
|
|
{
|
|
struct ifnet *ifp = sc->rl_ifp;
|
|
struct mii_data *mii;
|
|
uint32_t reg;
|
|
uint16_t cfg;
|
|
union {
|
|
uint32_t align_dummy;
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
} eaddr;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
mii = device_get_softc(sc->rl_miibus);
|
|
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
|
|
return;
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
re_stop(sc);
|
|
|
|
/* Put controller into known state. */
|
|
re_reset(sc);
|
|
|
|
/*
|
|
* Enable C+ RX and TX mode, as well as VLAN stripping and
|
|
* RX checksum offload. We must configure the C+ register
|
|
* before all others.
|
|
*/
|
|
cfg = RL_CPLUSCMD_PCI_MRW;
|
|
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0)
|
|
cfg |= RL_CPLUSCMD_RXCSUM_ENB;
|
|
if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0)
|
|
cfg |= RL_CPLUSCMD_VLANSTRIP;
|
|
if ((sc->rl_flags & RL_FLAG_MACSTAT) != 0) {
|
|
cfg |= RL_CPLUSCMD_MACSTAT_DIS;
|
|
/* XXX magic. */
|
|
cfg |= 0x0001;
|
|
} else
|
|
cfg |= RL_CPLUSCMD_RXENB | RL_CPLUSCMD_TXENB;
|
|
CSR_WRITE_2(sc, RL_CPLUS_CMD, cfg);
|
|
if (sc->rl_hwrev == RL_HWREV_8169_8110SC ||
|
|
sc->rl_hwrev == RL_HWREV_8169_8110SCE) {
|
|
reg = 0x000fff00;
|
|
if ((CSR_READ_1(sc, RL_CFG2) & RL_CFG2_PCI66MHZ) != 0)
|
|
reg |= 0x000000ff;
|
|
if (sc->rl_hwrev == RL_HWREV_8169_8110SCE)
|
|
reg |= 0x00f00000;
|
|
CSR_WRITE_4(sc, 0x7c, reg);
|
|
/* Disable interrupt mitigation. */
|
|
CSR_WRITE_2(sc, 0xe2, 0);
|
|
}
|
|
/*
|
|
* Disable TSO if interface MTU size is greater than MSS
|
|
* allowed in controller.
|
|
*/
|
|
if (ifp->if_mtu > RL_TSO_MTU && (ifp->if_capenable & IFCAP_TSO4) != 0) {
|
|
ifp->if_capenable &= ~IFCAP_TSO4;
|
|
ifp->if_hwassist &= ~CSUM_TSO;
|
|
}
|
|
|
|
/*
|
|
* Init our MAC address. Even though the chipset
|
|
* documentation doesn't mention it, we need to enter "Config
|
|
* register write enable" mode to modify the ID registers.
|
|
*/
|
|
/* Copy MAC address on stack to align. */
|
|
bcopy(IF_LLADDR(ifp), eaddr.eaddr, ETHER_ADDR_LEN);
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG);
|
|
CSR_WRITE_4(sc, RL_IDR0,
|
|
htole32(*(u_int32_t *)(&eaddr.eaddr[0])));
|
|
CSR_WRITE_4(sc, RL_IDR4,
|
|
htole32(*(u_int32_t *)(&eaddr.eaddr[4])));
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);
|
|
|
|
/*
|
|
* For C+ mode, initialize the RX descriptors and mbufs.
|
|
*/
|
|
re_rx_list_init(sc);
|
|
re_tx_list_init(sc);
|
|
|
|
/*
|
|
* Load the addresses of the RX and TX lists into the chip.
|
|
*/
|
|
|
|
CSR_WRITE_4(sc, RL_RXLIST_ADDR_HI,
|
|
RL_ADDR_HI(sc->rl_ldata.rl_rx_list_addr));
|
|
CSR_WRITE_4(sc, RL_RXLIST_ADDR_LO,
|
|
RL_ADDR_LO(sc->rl_ldata.rl_rx_list_addr));
|
|
|
|
CSR_WRITE_4(sc, RL_TXLIST_ADDR_HI,
|
|
RL_ADDR_HI(sc->rl_ldata.rl_tx_list_addr));
|
|
CSR_WRITE_4(sc, RL_TXLIST_ADDR_LO,
|
|
RL_ADDR_LO(sc->rl_ldata.rl_tx_list_addr));
|
|
|
|
/*
|
|
* Enable transmit and receive.
|
|
*/
|
|
CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB);
|
|
|
|
/*
|
|
* Set the initial TX configuration.
|
|
*/
|
|
if (sc->rl_testmode) {
|
|
if (sc->rl_type == RL_8169)
|
|
CSR_WRITE_4(sc, RL_TXCFG,
|
|
RL_TXCFG_CONFIG|RL_LOOPTEST_ON);
|
|
else
|
|
CSR_WRITE_4(sc, RL_TXCFG,
|
|
RL_TXCFG_CONFIG|RL_LOOPTEST_ON_CPLUS);
|
|
} else
|
|
CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG);
|
|
|
|
CSR_WRITE_1(sc, RL_EARLY_TX_THRESH, 16);
|
|
|
|
/*
|
|
* Set the initial RX configuration.
|
|
*/
|
|
re_set_rxmode(sc);
|
|
|
|
#ifdef DEVICE_POLLING
|
|
/*
|
|
* Disable interrupts if we are polling.
|
|
*/
|
|
if (ifp->if_capenable & IFCAP_POLLING)
|
|
CSR_WRITE_2(sc, RL_IMR, 0);
|
|
else /* otherwise ... */
|
|
#endif
|
|
|
|
/*
|
|
* Enable interrupts.
|
|
*/
|
|
if (sc->rl_testmode)
|
|
CSR_WRITE_2(sc, RL_IMR, 0);
|
|
else
|
|
CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS);
|
|
CSR_WRITE_2(sc, RL_ISR, RL_INTRS_CPLUS);
|
|
|
|
/* Set initial TX threshold */
|
|
sc->rl_txthresh = RL_TX_THRESH_INIT;
|
|
|
|
/* Start RX/TX process. */
|
|
CSR_WRITE_4(sc, RL_MISSEDPKT, 0);
|
|
#ifdef notdef
|
|
/* Enable receiver and transmitter. */
|
|
CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB);
|
|
#endif
|
|
|
|
#ifdef RE_TX_MODERATION
|
|
/*
|
|
* Initialize the timer interrupt register so that
|
|
* a timer interrupt will be generated once the timer
|
|
* reaches a certain number of ticks. The timer is
|
|
* reloaded on each transmit. This gives us TX interrupt
|
|
* moderation, which dramatically improves TX frame rate.
|
|
*/
|
|
if (sc->rl_type == RL_8169)
|
|
CSR_WRITE_4(sc, RL_TIMERINT_8169, 0x800);
|
|
else
|
|
CSR_WRITE_4(sc, RL_TIMERINT, 0x400);
|
|
#endif
|
|
|
|
/*
|
|
* For 8169 gigE NICs, set the max allowed RX packet
|
|
* size so we can receive jumbo frames.
|
|
*/
|
|
if (sc->rl_type == RL_8169)
|
|
CSR_WRITE_2(sc, RL_MAXRXPKTLEN, 16383);
|
|
|
|
if (sc->rl_testmode)
|
|
return;
|
|
|
|
mii_mediachg(mii);
|
|
|
|
CSR_WRITE_1(sc, RL_CFG1, CSR_READ_1(sc, RL_CFG1) | RL_CFG1_DRVLOAD);
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
sc->rl_flags &= ~RL_FLAG_LINK;
|
|
sc->rl_watchdog_timer = 0;
|
|
callout_reset(&sc->rl_stat_callout, hz, re_tick, sc);
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int
|
|
re_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct rl_softc *sc;
|
|
struct mii_data *mii;
|
|
int error;
|
|
|
|
sc = ifp->if_softc;
|
|
mii = device_get_softc(sc->rl_miibus);
|
|
RL_LOCK(sc);
|
|
error = mii_mediachg(mii);
|
|
RL_UNLOCK(sc);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void
|
|
re_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct rl_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
mii = device_get_softc(sc->rl_miibus);
|
|
|
|
RL_LOCK(sc);
|
|
mii_pollstat(mii);
|
|
RL_UNLOCK(sc);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
}
|
|
|
|
static int
|
|
re_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
struct rl_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
struct mii_data *mii;
|
|
int error = 0;
|
|
|
|
switch (command) {
|
|
case SIOCSIFMTU:
|
|
if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > RL_JUMBO_MTU) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
if ((sc->rl_flags & RL_FLAG_NOJUMBO) != 0 &&
|
|
ifr->ifr_mtu > RL_MAX_FRAMELEN) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
RL_LOCK(sc);
|
|
if (ifp->if_mtu != ifr->ifr_mtu)
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
if (ifp->if_mtu > RL_TSO_MTU &&
|
|
(ifp->if_capenable & IFCAP_TSO4) != 0) {
|
|
ifp->if_capenable &= ~IFCAP_TSO4;
|
|
ifp->if_hwassist &= ~CSUM_TSO;
|
|
VLAN_CAPABILITIES(ifp);
|
|
}
|
|
RL_UNLOCK(sc);
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
RL_LOCK(sc);
|
|
if ((ifp->if_flags & IFF_UP) != 0) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
|
|
if (((ifp->if_flags ^ sc->rl_if_flags)
|
|
& (IFF_PROMISC | IFF_ALLMULTI)) != 0)
|
|
re_set_rxmode(sc);
|
|
} else
|
|
re_init_locked(sc);
|
|
} else {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
|
|
re_stop(sc);
|
|
}
|
|
sc->rl_if_flags = ifp->if_flags;
|
|
RL_UNLOCK(sc);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
RL_LOCK(sc);
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
|
|
re_set_rxmode(sc);
|
|
RL_UNLOCK(sc);
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
mii = device_get_softc(sc->rl_miibus);
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
{
|
|
int mask, reinit;
|
|
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
reinit = 0;
|
|
#ifdef DEVICE_POLLING
|
|
if (mask & IFCAP_POLLING) {
|
|
if (ifr->ifr_reqcap & IFCAP_POLLING) {
|
|
error = ether_poll_register(re_poll, ifp);
|
|
if (error)
|
|
return(error);
|
|
RL_LOCK(sc);
|
|
/* Disable interrupts */
|
|
CSR_WRITE_2(sc, RL_IMR, 0x0000);
|
|
ifp->if_capenable |= IFCAP_POLLING;
|
|
RL_UNLOCK(sc);
|
|
} else {
|
|
error = ether_poll_deregister(ifp);
|
|
/* Enable interrupts. */
|
|
RL_LOCK(sc);
|
|
CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS);
|
|
ifp->if_capenable &= ~IFCAP_POLLING;
|
|
RL_UNLOCK(sc);
|
|
}
|
|
}
|
|
#endif /* DEVICE_POLLING */
|
|
if (mask & IFCAP_HWCSUM) {
|
|
ifp->if_capenable ^= IFCAP_HWCSUM;
|
|
if (ifp->if_capenable & IFCAP_TXCSUM)
|
|
ifp->if_hwassist |= RE_CSUM_FEATURES;
|
|
else
|
|
ifp->if_hwassist &= ~RE_CSUM_FEATURES;
|
|
reinit = 1;
|
|
}
|
|
if ((mask & IFCAP_TSO4) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_TSO) != 0) {
|
|
ifp->if_capenable ^= IFCAP_TSO4;
|
|
if ((IFCAP_TSO4 & ifp->if_capenable) != 0)
|
|
ifp->if_hwassist |= CSUM_TSO;
|
|
else
|
|
ifp->if_hwassist &= ~CSUM_TSO;
|
|
if (ifp->if_mtu > RL_TSO_MTU &&
|
|
(ifp->if_capenable & IFCAP_TSO4) != 0) {
|
|
ifp->if_capenable &= ~IFCAP_TSO4;
|
|
ifp->if_hwassist &= ~CSUM_TSO;
|
|
}
|
|
}
|
|
if ((mask & IFCAP_VLAN_HWTSO) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_VLAN_HWTSO) != 0)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTSO;
|
|
if ((mask & IFCAP_VLAN_HWTAGGING) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_VLAN_HWTAGGING) != 0) {
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
|
|
/* TSO over VLAN requires VLAN hardware tagging. */
|
|
if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) == 0)
|
|
ifp->if_capenable &= ~IFCAP_VLAN_HWTSO;
|
|
reinit = 1;
|
|
}
|
|
if ((mask & IFCAP_WOL) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_WOL) != 0) {
|
|
if ((mask & IFCAP_WOL_UCAST) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_UCAST;
|
|
if ((mask & IFCAP_WOL_MCAST) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_MCAST;
|
|
if ((mask & IFCAP_WOL_MAGIC) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_MAGIC;
|
|
}
|
|
if (reinit && ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
re_init(sc);
|
|
}
|
|
VLAN_CAPABILITIES(ifp);
|
|
}
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
re_watchdog(struct rl_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
if (sc->rl_watchdog_timer == 0 || --sc->rl_watchdog_timer != 0)
|
|
return;
|
|
|
|
ifp = sc->rl_ifp;
|
|
re_txeof(sc);
|
|
if (sc->rl_ldata.rl_tx_free == sc->rl_ldata.rl_tx_desc_cnt) {
|
|
if_printf(ifp, "watchdog timeout (missed Tx interrupts) "
|
|
"-- recovering\n");
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_txtask);
|
|
return;
|
|
}
|
|
|
|
if_printf(ifp, "watchdog timeout\n");
|
|
ifp->if_oerrors++;
|
|
|
|
re_rxeof(sc, NULL);
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
re_init_locked(sc);
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_txtask);
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void
|
|
re_stop(struct rl_softc *sc)
|
|
{
|
|
int i;
|
|
struct ifnet *ifp;
|
|
struct rl_txdesc *txd;
|
|
struct rl_rxdesc *rxd;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->rl_ifp;
|
|
|
|
sc->rl_watchdog_timer = 0;
|
|
callout_stop(&sc->rl_stat_callout);
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
|
|
if ((sc->rl_flags & RL_FLAG_CMDSTOP) != 0)
|
|
CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_STOPREQ | RL_CMD_TX_ENB |
|
|
RL_CMD_RX_ENB);
|
|
else
|
|
CSR_WRITE_1(sc, RL_COMMAND, 0x00);
|
|
DELAY(1000);
|
|
CSR_WRITE_2(sc, RL_IMR, 0x0000);
|
|
CSR_WRITE_2(sc, RL_ISR, 0xFFFF);
|
|
|
|
if (sc->rl_head != NULL) {
|
|
m_freem(sc->rl_head);
|
|
sc->rl_head = sc->rl_tail = NULL;
|
|
}
|
|
|
|
/* Free the TX list buffers. */
|
|
|
|
for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) {
|
|
txd = &sc->rl_ldata.rl_tx_desc[i];
|
|
if (txd->tx_m != NULL) {
|
|
bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag,
|
|
txd->tx_dmamap, BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag,
|
|
txd->tx_dmamap);
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
}
|
|
}
|
|
|
|
/* Free the RX list buffers. */
|
|
|
|
for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
|
|
rxd = &sc->rl_ldata.rl_rx_desc[i];
|
|
if (rxd->rx_m != NULL) {
|
|
bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag,
|
|
rxd->rx_dmamap, BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag,
|
|
rxd->rx_dmamap);
|
|
m_freem(rxd->rx_m);
|
|
rxd->rx_m = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Device suspend routine. Stop the interface and save some PCI
|
|
* settings in case the BIOS doesn't restore them properly on
|
|
* resume.
|
|
*/
|
|
static int
|
|
re_suspend(device_t dev)
|
|
{
|
|
struct rl_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
RL_LOCK(sc);
|
|
re_stop(sc);
|
|
re_setwol(sc);
|
|
sc->suspended = 1;
|
|
RL_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Device resume routine. Restore some PCI settings in case the BIOS
|
|
* doesn't, re-enable busmastering, and restart the interface if
|
|
* appropriate.
|
|
*/
|
|
static int
|
|
re_resume(device_t dev)
|
|
{
|
|
struct rl_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
RL_LOCK(sc);
|
|
|
|
ifp = sc->rl_ifp;
|
|
/* Take controller out of sleep mode. */
|
|
if ((sc->rl_flags & RL_FLAG_MACSLEEP) != 0) {
|
|
if ((CSR_READ_1(sc, RL_MACDBG) & 0x80) == 0x80)
|
|
CSR_WRITE_1(sc, RL_GPIO,
|
|
CSR_READ_1(sc, RL_GPIO) | 0x01);
|
|
}
|
|
|
|
/*
|
|
* Clear WOL matching such that normal Rx filtering
|
|
* wouldn't interfere with WOL patterns.
|
|
*/
|
|
re_clrwol(sc);
|
|
|
|
/* reinitialize interface if necessary */
|
|
if (ifp->if_flags & IFF_UP)
|
|
re_init_locked(sc);
|
|
|
|
sc->suspended = 0;
|
|
RL_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static int
|
|
re_shutdown(device_t dev)
|
|
{
|
|
struct rl_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
RL_LOCK(sc);
|
|
re_stop(sc);
|
|
/*
|
|
* Mark interface as down since otherwise we will panic if
|
|
* interrupt comes in later on, which can happen in some
|
|
* cases.
|
|
*/
|
|
sc->rl_ifp->if_flags &= ~IFF_UP;
|
|
re_setwol(sc);
|
|
RL_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
re_setwol(struct rl_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
int pmc;
|
|
uint16_t pmstat;
|
|
uint8_t v;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
if (pci_find_extcap(sc->rl_dev, PCIY_PMG, &pmc) != 0)
|
|
return;
|
|
|
|
ifp = sc->rl_ifp;
|
|
/* Put controller into sleep mode. */
|
|
if ((sc->rl_flags & RL_FLAG_MACSLEEP) != 0) {
|
|
if ((CSR_READ_1(sc, RL_MACDBG) & 0x80) == 0x80)
|
|
CSR_WRITE_1(sc, RL_GPIO,
|
|
CSR_READ_1(sc, RL_GPIO) & ~0x01);
|
|
}
|
|
if ((ifp->if_capenable & IFCAP_WOL) != 0 &&
|
|
(sc->rl_flags & RL_FLAG_WOLRXENB) != 0)
|
|
CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RX_ENB);
|
|
/* Enable config register write. */
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE);
|
|
|
|
/* Enable PME. */
|
|
v = CSR_READ_1(sc, RL_CFG1);
|
|
v &= ~RL_CFG1_PME;
|
|
if ((ifp->if_capenable & IFCAP_WOL) != 0)
|
|
v |= RL_CFG1_PME;
|
|
CSR_WRITE_1(sc, RL_CFG1, v);
|
|
|
|
v = CSR_READ_1(sc, RL_CFG3);
|
|
v &= ~(RL_CFG3_WOL_LINK | RL_CFG3_WOL_MAGIC);
|
|
if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
|
|
v |= RL_CFG3_WOL_MAGIC;
|
|
CSR_WRITE_1(sc, RL_CFG3, v);
|
|
|
|
/* Config register write done. */
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);
|
|
|
|
v = CSR_READ_1(sc, RL_CFG5);
|
|
v &= ~(RL_CFG5_WOL_BCAST | RL_CFG5_WOL_MCAST | RL_CFG5_WOL_UCAST);
|
|
v &= ~RL_CFG5_WOL_LANWAKE;
|
|
if ((ifp->if_capenable & IFCAP_WOL_UCAST) != 0)
|
|
v |= RL_CFG5_WOL_UCAST;
|
|
if ((ifp->if_capenable & IFCAP_WOL_MCAST) != 0)
|
|
v |= RL_CFG5_WOL_MCAST | RL_CFG5_WOL_BCAST;
|
|
if ((ifp->if_capenable & IFCAP_WOL) != 0)
|
|
v |= RL_CFG5_WOL_LANWAKE;
|
|
CSR_WRITE_1(sc, RL_CFG5, v);
|
|
|
|
if ((ifp->if_capenable & IFCAP_WOL) != 0 &&
|
|
(sc->rl_flags & RL_FLAG_PHYWAKE_PM) != 0)
|
|
CSR_WRITE_1(sc, RL_PMCH, CSR_READ_1(sc, RL_PMCH) & ~0x80);
|
|
/*
|
|
* It seems that hardware resets its link speed to 100Mbps in
|
|
* power down mode so switching to 100Mbps in driver is not
|
|
* needed.
|
|
*/
|
|
|
|
/* Request PME if WOL is requested. */
|
|
pmstat = pci_read_config(sc->rl_dev, pmc + PCIR_POWER_STATUS, 2);
|
|
pmstat &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE);
|
|
if ((ifp->if_capenable & IFCAP_WOL) != 0)
|
|
pmstat |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE;
|
|
pci_write_config(sc->rl_dev, pmc + PCIR_POWER_STATUS, pmstat, 2);
|
|
}
|
|
|
|
static void
|
|
re_clrwol(struct rl_softc *sc)
|
|
{
|
|
int pmc;
|
|
uint8_t v;
|
|
|
|
RL_LOCK_ASSERT(sc);
|
|
|
|
if (pci_find_extcap(sc->rl_dev, PCIY_PMG, &pmc) != 0)
|
|
return;
|
|
|
|
/* Enable config register write. */
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE);
|
|
|
|
v = CSR_READ_1(sc, RL_CFG3);
|
|
v &= ~(RL_CFG3_WOL_LINK | RL_CFG3_WOL_MAGIC);
|
|
CSR_WRITE_1(sc, RL_CFG3, v);
|
|
|
|
/* Config register write done. */
|
|
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);
|
|
|
|
v = CSR_READ_1(sc, RL_CFG5);
|
|
v &= ~(RL_CFG5_WOL_BCAST | RL_CFG5_WOL_MCAST | RL_CFG5_WOL_UCAST);
|
|
v &= ~RL_CFG5_WOL_LANWAKE;
|
|
CSR_WRITE_1(sc, RL_CFG5, v);
|
|
}
|