freebsd-skq/sys/arm/at91/if_macbreg.h
Warner Losh 56ea9c7b08 Add support for RMII in macb, cribbed slightly from the ate
driver. This is taken from the MAC at boot, but can be overridden with
'options AT91_MACB_USE_RMII'.

Switch to macb for HL201 and SAM9G20EK boards. It now works both
places. Also start to sneak up on FDT for the SAM9G20EK board, but
leave disabled due to issues with MMC that haven't been resolved.
Add early debug support for the SAM9G20EK since that is required
for FDT to work presently on these SoC.
2015-11-07 20:02:07 +00:00

108 lines
2.5 KiB
C

/*
* $FreeBSD$
*/
#ifndef MACB_REG_H
#define MACB_REG_H
#define EMAC_NCR 0x00
#define EMAC_NCFGR 0x04
#define EMAC_TSR 0x14
#define EMAC_RSR 0x20
#define EMAC_ISR 0x24
#define EMAC_IER 0x28
#define EMAC_IDR 0x2C
#define EMAC_IMR 0x30
#define EMAC_RBQP 0x18
#define EMAC_TBQP 0x1C
#define EMAC_HRB 0x90
#define EMAC_HRT 0x94
#define EMAC_SA1B 0x98
#define EMAC_SA1T 0x9C
#define EMAC_USRIO 0xC0
#define EMAC_MAN 0x34 /* EMAC PHY Maintenance Register */
#define EMAC_SR 0x08 /* EMAC STatus Register */
#define EMAC_SR_LINK (1U << 0) /* Reserved! */
#define EMAC_SR_MDIO (1U << 1) /* MDIO pin status */
#define EMAC_SR_IDLE (1U << 2) /* IDLE (PHY logic) */
#define RX_ENABLE (1 << 2)
#define TX_ENABLE (1 << 3)
#define MPE_ENABLE (1 << 4)
/* EMAC_MAN */
#define EMAC_MAN_BITS 0x40020000 /* HIGH and CODE bits */
#define EMAC_MAN_READ (2U << 28)
#define EMAC_MAN_WRITE (1U << 28)
#define EMAC_MAN_PHYA_BIT 23
#define EMAC_MAN_REGA_BIT 18
#define EMAC_MAN_VALUE_MASK 0xffffU
#define EMAC_MAN_REG_WR(phy, reg, val) \
(EMAC_MAN_BITS | EMAC_MAN_WRITE | ((phy) << EMAC_MAN_PHYA_BIT) | \
((reg) << EMAC_MAN_REGA_BIT) | ((val) & EMAC_MAN_VALUE_MASK))
#define EMAC_MAN_REG_RD(phy, reg) \
(EMAC_MAN_BITS | EMAC_MAN_READ | ((phy) << EMAC_MAN_PHYA_BIT) | \
((reg) << EMAC_MAN_REGA_BIT))
#define RCOMP_INTERRUPT (1 << 1)
#define RXUBR_INTERRUPT (1 << 2)
#define TUBR_INTERRUPT (1 << 3)
#define TUND_INTERRUPT (1 << 4)
#define RLE_INTERRUPT (1 << 5)
#define TXERR_INTERRUPT (1 << 6)
#define ROVR_INTERRUPT (1 << 10)
#define HRESP_INTERRUPT (1 << 11)
#define TCOMP_INTERRUPT (1 << 7)
#define CLEAR_STAT (1 << 5)
#define TRANSMIT_START (1 << 9)
#define TRANSMIT_STOP (1 << 10)
/*Transmit status register flags*/
#define TSR_UND (1 << 6)
#define TSR_COMP (1 << 5)
#define TSR_BEX (1 << 4)
#define TSR_TGO (1 << 3)
#define TSR_RLE (1 << 2)
#define TSR_COL (1 << 1)
#define TSR_UBR (1 << 0)
#define CFG_SPD (1 << 0)
#define CFG_FD (1 << 1)
#define CFG_CAF (1 << 4)
#define CFG_NBC (1 << 5)
#define CFG_MTI (1 << 6)
#define CFG_UNI (1 << 7)
#define CFG_BIG (1 << 8)
#define CFG_CLK_8 (0)
#define CFG_CLK_16 (1)
#define CFG_CLK_32 (2)
#define CFG_CLK_64 (3)
#define CFG_PAE (1 << 13)
#define CFG_RBOF_0 (0 << 14)
#define CFG_RBOF_1 (1 << 14)
#define CFG_RBOF_2 (2 << 14)
#define CFG_RBOF_3 (3 << 14)
#define CFG_DRFCS (1 << 17)
#define USRIO_RMII (1 << 0) /* RMII vs MII pins */
#define USRIO_CLOCK (1 << 1) /* Enable the clock! */
#endif