14503a8247
The tap driver is used to present a virtual Ethernet interface to the system. Packets presented by the network stack to the interface are made available to a character device in /dev. With tap and the bridge code, you can make remote bridge configurations where both sides of the bridge are separated by userland daemons. This driver also has a special naming hack to allow it to serve a similar purpose to the vmware port. Submitted by: myevmenkin@att.com, vsilyaev@mindspring.com
1590 lines
37 KiB
Bash
1590 lines
37 KiB
Bash
#!/bin/sh -
|
|
#
|
|
# Copyright (c) 1990 The Regents of the University of California.
|
|
# All rights reserved.
|
|
#
|
|
# Written and contributed by W. Jolitz 12/90
|
|
#
|
|
# Redistribution and use in source and binary forms are permitted provided
|
|
# that: (1) source distributions retain this entire copyright notice and
|
|
# comment, and (2) distributions including binaries display the following
|
|
# acknowledgement: ``This product includes software developed by the
|
|
# University of California, Berkeley and its contributors'' in the
|
|
# documentation or other materials provided with the distribution and in
|
|
# all advertising materials mentioning features or use of this software.
|
|
# Neither the name of the University nor the names of its contributors may
|
|
# be used to endorse or promote products derived from this software without
|
|
# specific prior written permission.
|
|
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
|
|
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
|
|
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
|
|
#
|
|
# @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
|
|
# $FreeBSD$
|
|
#
|
|
# Device "make" file. Valid arguments:
|
|
# all makes all known devices, standard number of units (or close)
|
|
# std standard devices
|
|
# jail suitable for a jail(8)
|
|
# local configuration specific devices
|
|
# mach-4 mach4&lites+devices for Mach's XFree86 distribution
|
|
# (see http://www.cs.hut.fi/lites.html for more info on LITES)
|
|
#
|
|
# Tapes:
|
|
# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
|
|
# sa* SCSI Sequential Access Devices
|
|
#
|
|
# Disks:
|
|
# acd* ATAPI CD-ROM disks
|
|
# amrd* AMI MegaRAID
|
|
# cd* SCSI CD-ROM disks
|
|
# da* SCSI Direct Access Devices
|
|
# fd* floppy disk drives (3 1/2", 5 1/4")
|
|
# fla* M-Systems DiskOnChip
|
|
# idad* Compaq Smart-2 RAID arrays
|
|
# matcd* Matsushita (Panasonic) CD-ROM disks
|
|
# mcd* Mitsumi CD-ROM disks
|
|
# md* Memory (or malloc) disk
|
|
# mlx* Mylex DAC960 RAID controllers
|
|
# mlxd* Mylex DAC960 RAID disk volumes
|
|
# scd* Sony CD-ROM disks
|
|
# vn* vnode disks
|
|
# wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...)
|
|
# wfd* IDE floppy disk drives (LS-120)
|
|
#
|
|
# Console ports:
|
|
# vty* virtual console devices for syscons/pcvt/codrv
|
|
#
|
|
# Pointing devices:
|
|
# mse* Logitech and ATI Inport bus mouse
|
|
# psm* PS/2 mouse
|
|
# sysmouse Mousesystems mouse emulator for syscons
|
|
#
|
|
# Time devices:
|
|
# refclock-* serial ports used by xntpd parse refclocks
|
|
#
|
|
# Terminal ports:
|
|
# tty* general purpose serial ports
|
|
# cua* dialout serial ports
|
|
# ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
|
|
# cuaA* Specialix SI/XIO dialout ports
|
|
# ttyD* Digiboard - 16 dialin ports
|
|
# cuaD* Digiboard - 16 dialout ports
|
|
# ttyR* Rocketport dialin ports
|
|
# cuaR* Rocketport dialout ports
|
|
#
|
|
# Pseudo terminals:
|
|
# pty* set of 32 master and slave pseudo terminals
|
|
# vty* virtual terminals using syscons/pcvt/codrv console
|
|
#
|
|
# Parallel port:
|
|
# lpt* Printer
|
|
# ppi* Parallel port i/o
|
|
# pps* Pulse per second timing interface
|
|
# pcfclock* Parallel time sync interface
|
|
#
|
|
# I2C and SMBus:
|
|
# iic* I2C devices
|
|
# smb* SMBUS devices
|
|
#
|
|
# USB devices:
|
|
# usb* USB bus control device
|
|
# uhid* Human Interface Device (HID)
|
|
# ums* mouse
|
|
# ulpt* printer
|
|
# ugen* generic USB device
|
|
# urio* Diamond Rio 500
|
|
# usio* USB serial devices
|
|
#
|
|
# SCSI devices (other than CD-ROM, tape and disk):
|
|
# ch* SCSI Media-Changer (juke box) driver
|
|
# worm* WORM driver
|
|
# pt* Processor Type (HP scanner, as one example)
|
|
# pass* CAM Passthrough device
|
|
# ses* SES (SCSI Environmental Services) and
|
|
# SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
|
|
#
|
|
# PC-CARD (previously called PCMCIA) support
|
|
# card* PC-CARD slots
|
|
#
|
|
# ISDN devices:
|
|
# i4b isdnd call control device
|
|
# i4bctl debugging control device
|
|
# i4btrc* trace data interface(s), one per passive card
|
|
# i4btel* telephony interface(s)
|
|
# i4bteld* telephony dialout interface(s)
|
|
# i4brbch* raw b channel access device(s)
|
|
#
|
|
# Special purpose devices:
|
|
# apm Advanced Power Management BIOS
|
|
# apmctl APM BIOS control device
|
|
# bpf* packet filter
|
|
# speaker pc speaker
|
|
# tw* xten power controller
|
|
# snd* various sound cards
|
|
# pcaudio PCM audio driver
|
|
# socksys iBCS2 socket system driver
|
|
# vat VAT compatibility audio driver (requires snd*)
|
|
# gsc Genius GS-4500 hand scanner
|
|
# joy pc joystick
|
|
# tun* Tunneling IP device
|
|
# tap* Ethernet Tunneling device
|
|
# snp* tty snoop devices
|
|
# spigot Video Spigot video acquisition card
|
|
# ctx* Cortex-I video acquisition card
|
|
# meteor* Matrox Meteor video acquisition card (pci)
|
|
# bktr* Bt848 based video acquisition card (pci)
|
|
# labpc* National Instrument's Lab-PC and LAB-PC+
|
|
# perfmon CPU performance-monitoring counters
|
|
# pci PCI configuration-space access from user mode
|
|
# ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
|
|
# kbd keyboard devices
|
|
# 3dfx* 3dfx voodoo device for glide (tdfx), links 3dfx to 3dfx#
|
|
# agpgart AGP interface
|
|
#
|
|
|
|
if [ -n "$MAKEDEVPATH" ]; then
|
|
PATH="$MAKEDEVPATH"
|
|
else
|
|
PATH=/sbin:/bin
|
|
fi
|
|
umask 77
|
|
|
|
# Usage: die exitcode msg
|
|
die() {
|
|
echo $2
|
|
exit $1
|
|
}
|
|
|
|
# Convert integer to partition name
|
|
dkitop() {
|
|
local p
|
|
|
|
case $1 in
|
|
0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
|
|
*) p="?";;
|
|
esac
|
|
echo $p
|
|
}
|
|
|
|
# Convert integer to slice name
|
|
dkitos() {
|
|
local s
|
|
|
|
case $1 in
|
|
0) s="";;
|
|
1) s="";;
|
|
*) s=s$(($1-1));;
|
|
esac
|
|
echo $s
|
|
}
|
|
|
|
# Convert disk (type, unit, slice, partition) to minor number
|
|
dkminor()
|
|
{
|
|
echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
|
|
}
|
|
|
|
# Override mknod(2) to add extra handling to it.
|
|
mknod() {
|
|
rm -f "$1" || exit 1
|
|
case $# in
|
|
4) /sbin/mknod "$@" root:wheel || die 2 "/sbin/mknod $@ failed";;
|
|
5) /sbin/mknod "$@" || die 2 "/sbin/mknod $@ failed";;
|
|
*) die 2 "bad node: mknod $@";;
|
|
esac
|
|
}
|
|
|
|
# Convert tape (ctrl, unit, mode, access) to minor number
|
|
saminor()
|
|
{
|
|
echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
|
|
}
|
|
|
|
# Convert the last character of a tty name to a minor number.
|
|
ttyminor()
|
|
{
|
|
case $unit in
|
|
[0-9]) m=$unit;;
|
|
a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
|
|
h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
|
|
o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
|
|
v) m=31;;
|
|
*) m="?";;
|
|
esac
|
|
echo $m
|
|
}
|
|
|
|
# Raw partition for disks
|
|
dkrawpart=2
|
|
|
|
# Compatibility slice for disks
|
|
dkcompatslice=0
|
|
|
|
# Raw slice for disks
|
|
dkrawslice=1
|
|
|
|
# Standard umasks
|
|
disk_umask=037 # allow group operator to read disks
|
|
tape_umask=017 # allow group operator to read/write tapes
|
|
|
|
for i in $*; do
|
|
case $i in
|
|
|
|
all)
|
|
sh MAKEDEV std # standard
|
|
sh MAKEDEV fd0 fd1 # bdev, floppy disk
|
|
sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk
|
|
sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk
|
|
sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
|
|
sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk
|
|
sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
|
|
sh MAKEDEV vn0 # bdev, virtual disk
|
|
sh MAKEDEV cd0 matcd0 mcd0 scd0 # bdev, cdrom
|
|
sh MAKEDEV sa0 wt0 # bdev, tape
|
|
sh MAKEDEV vty12 # cdev, virtual tty
|
|
sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
|
|
sh MAKEDEV pty0 # cdev, pseudo tty
|
|
sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
|
|
sh MAKEDEV kbd0 kbd1 # cdev, keyboard
|
|
sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
|
|
sh MAKEDEV pcaudio speaker # cdev, noise
|
|
sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
|
|
sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
|
|
sh MAKEDEV iic0 iic1 # cdev, I2C device
|
|
sh MAKEDEV smb0 smb1 # cdev, SMBus device
|
|
sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
|
|
sh MAKEDEV urio0 # cdev, USB devices too
|
|
sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
|
|
sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
|
|
sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network
|
|
sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
|
|
sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
|
|
sh MAKEDEV pass4 xpt2 # cdev, CAM
|
|
sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
|
|
sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
|
|
sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
|
|
sh MAKEDEV agpgart # cdev, AGP
|
|
;;
|
|
|
|
# a much restricted set of the above, to save precious i-nodes on the
|
|
# fixit floppy
|
|
fixit)
|
|
sh MAKEDEV std # standard
|
|
sh MAKEDEV fd0 # bdev, floppy disk
|
|
sh MAKEDEV da0 # bdev, SCSI disk
|
|
sh MAKEDEV ad0 # bdev, ATA disk
|
|
sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
|
|
sh MAKEDEV wd0 # bdev, OLD disk
|
|
sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
|
|
sh MAKEDEV vn0 # bdev, virtual disk
|
|
sh MAKEDEV cd0 # bdev, cdrom
|
|
sh MAKEDEV sa0 # bdev, tape
|
|
sh MAKEDEV vty2 # cdev, virtual tty
|
|
sh MAKEDEV cuaa0 # cdev, serial tty
|
|
sh MAKEDEV pty0 # cdev, pseudo tty
|
|
sh MAKEDEV ttyd0 # cdev, serial tty
|
|
sh MAKEDEV kbd0 # cdev, keyboard
|
|
sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
|
|
sh MAKEDEV lpt0 # cdev, printer
|
|
sh MAKEDEV ppi0 # cdev, parallel port
|
|
sh MAKEDEV iic0 # cdev, I2C device
|
|
sh MAKEDEV smb0 # cdev, SMBus device
|
|
sh MAKEDEV ums0 # cdev, USB devices
|
|
sh MAKEDEV tun0 # cdev, network
|
|
sh MAKEDEV tap0 # cdev, network
|
|
sh MAKEDEV ch0 # cdev, miscellaneous
|
|
sh MAKEDEV apm apmctl card0 # cdev, laptop
|
|
sh MAKEDEV pass1 xpt1 # cdev, CAM
|
|
sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
|
|
sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN
|
|
sh MAKEDEV i4brbch0 # cdev, ISDN
|
|
rm -f fd/[1-9]?
|
|
;;
|
|
|
|
std)
|
|
mknod console c 0 0; chmod 600 console
|
|
mknod kmem c 2 1 root:kmem; chmod 640 kmem
|
|
mknod mem c 2 0 root:kmem; chmod 640 mem
|
|
mknod null c 2 2; chmod 666 null
|
|
mknod random c 2 3; chmod 644 random
|
|
ln -sf random urandom
|
|
mknod zero c 2 12; chmod 666 zero
|
|
mknod io c 2 14; chmod 600 io
|
|
mknod tty c 1 0; chmod 666 tty
|
|
mknod klog c 7 0; chmod 600 klog
|
|
mknod pci c 78 0; chmod 644 pci
|
|
mkdir -p fd
|
|
(cd fd && i=0 &&
|
|
while [ $i -lt 64 ]; do
|
|
mknod $i c 22 $i
|
|
i=$(($i + 1))
|
|
done
|
|
)
|
|
chmod 555 fd
|
|
chmod 666 fd/*
|
|
ln -sf fd/0 stdin
|
|
ln -sf fd/1 stdout
|
|
ln -sf fd/2 stderr
|
|
;;
|
|
|
|
jail)
|
|
sh MAKEDEV std pty0
|
|
rm mem kmem pci io klog console # for security
|
|
ln -sf null mem # for libkvm (ab)users
|
|
ln -sf null kmem # --//--
|
|
ln -sf null console
|
|
;;
|
|
|
|
mach-4)
|
|
mknod iopl c 22 0
|
|
mknod kbd c 23 0
|
|
mknod mouse c 24 0
|
|
mknod time c 25 0
|
|
mknod timezone c 26 0
|
|
;;
|
|
|
|
# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
|
|
wt*)
|
|
umask $tape_umask
|
|
u=`expr $i : '..\(.*\)'`
|
|
if [ -z "${u}" ]; then u=0; fi
|
|
# default density, 512b blocks
|
|
mknod rwt${u} c 10 `expr 0 + $u` root:operator
|
|
mknod nrwt${u} c 10 `expr 4 + $u` root:operator
|
|
# default density, 1024b blocks
|
|
# mknod rWt${u} c 10 `expr 64 + $u` root:operator
|
|
# mknod nrWt${u} c 10 `expr 68 + $u` root:operator
|
|
mknod rwt${u}b c 10 `expr 16 + $u` root:operator # 60 megabytes
|
|
mknod nrwt${u}b c 10 `expr 20 + $u` root:operator
|
|
mknod rwt${u}c c 10 `expr 24 + $u` root:operator # 120 megabytes
|
|
mknod nrwt${u}c c 10 `expr 28 + $u` root:operator
|
|
mknod rwt${u}d c 10 `expr 32 + $u` root:operator # 150 megabytes
|
|
mknod nrwt${u}d c 10 `expr 36 + $u` root:operator
|
|
# mknod rwt${u}e c 10 `expr 40 + $u` root:operator # 300 megabytes?
|
|
# mknod nrwt${u}e c 10 `expr 44 + $u` root:operator
|
|
# mknod rwt${u}f c 10 `expr 48 + $u` root:operator # 600 megabytes?
|
|
# mknod nrwt${u}f c 10 `expr 52 + $u` root:operator
|
|
umask 77
|
|
;;
|
|
|
|
# Individual slices.
|
|
ad*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|md*s*|mlxd*s*|twed*s*|vn*s*|wd*s*|wfd*s*)
|
|
umask $disk_umask
|
|
case $i in
|
|
ad*s*) name=ad; chr=116;;
|
|
afd*s*) name=afd; chr=118;;
|
|
amrd*s*) name=amrd; chr=133;;
|
|
da*s*) name=da; chr=13;;
|
|
fla*s*) name=fla; chr=102;;
|
|
idad*s*) name=idad; chr=109;;
|
|
md*s*) name=md; chr=95;;
|
|
mlxd*s*) name=mlxd; chr=131;;
|
|
twed*s*) name=twed; chr=147;;
|
|
vn*s*) name=vn; chr=43;;
|
|
wd*s*) name=wd; chr=3;;
|
|
wfd*s*) name=wfd; chr=87;;
|
|
esac
|
|
case $i in
|
|
amrd*s*|idad*s*|mlxd*s*|twed*s*)
|
|
unit=`expr $i : '....\([0-9]*\)s'`
|
|
slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
|
|
part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
|
|
;;
|
|
afd*s*|fla*s*|wfd*s*)
|
|
unit=`expr $i : '...\([0-9]*\)s'`
|
|
slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
|
|
part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
|
|
;;
|
|
*)
|
|
unit=`expr $i : '..\([0-9]*\)s'`
|
|
slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
|
|
part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
|
|
;;
|
|
esac
|
|
case $unit in
|
|
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
|
|
case $slice in
|
|
[0-9]|[1-2][0-9]|30)
|
|
oldslice=$slice
|
|
slice=$(($slice+1))
|
|
slicename=`dkitos $slice`
|
|
minor=`dkminor 0 $unit $slice $dkrawpart`
|
|
mknod $name$unit$slicename c $chr $minor root:operator
|
|
ln -f $name$unit$slicename r$name$unit$slicename
|
|
case $part in
|
|
[a-h])
|
|
case $oldslice in
|
|
0) slice=$oldslice ;;
|
|
esac
|
|
for part in 0 1 2 3 4 5 6 7
|
|
do
|
|
minor=`dkminor 0 $unit $slice $part`
|
|
partname=`dkitop $part`
|
|
mknod $name$unit$slicename$partname \
|
|
c $chr $minor root:operator
|
|
ln -f $name$unit$slicename$partname \
|
|
r$name$unit$slicename$partname
|
|
done
|
|
;;
|
|
"")
|
|
;;
|
|
*)
|
|
echo bad partition for disk in: $i
|
|
;;
|
|
esac
|
|
;;
|
|
*)
|
|
echo bad slice for disk in: $i
|
|
;;
|
|
esac
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
fd*)
|
|
umask $disk_umask
|
|
unit=`expr $i : '..\(.*\)'`
|
|
name=fd; chr=9
|
|
case $unit in
|
|
0|1|2|3)
|
|
mknod ${name}${unit} c $chr `expr $unit '*' 64` root:operator
|
|
ln -f ${name}${unit} r${name}${unit}
|
|
# Fake BSD partitions
|
|
for i in a b c d e f g h
|
|
do
|
|
ln -f ${name}${unit} ${name}${unit}$i
|
|
ln -f r${name}${unit} r${name}${unit}$i
|
|
done
|
|
# User-readable and programmer-readable name sets
|
|
|
|
mknod ${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1` \
|
|
root:operator
|
|
ln -f ${name}${unit}.1720 r${name}${unit}.1720
|
|
# ln -f ${name}${unit}.1720 ${name}${unit}135hs21
|
|
# ln -f r${name}${unit}.1720 r${name}${unit}135hs21
|
|
|
|
mknod ${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2` \
|
|
root:operator
|
|
ln -f ${name}${unit}.1480 r${name}${unit}.1480
|
|
# ln -f ${name}${unit}.1480 ${name}${unit}135hs18
|
|
# ln -f r${name}${unit}.1480 r${name}${unit}135hs18
|
|
# ln -f ${name}${unit}.1480 ${name}${unit}96hs18
|
|
# ln -f r${name}${unit}.1480 r${name}${unit}96hs18
|
|
|
|
mknod ${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3` \
|
|
root:operator
|
|
ln -f ${name}${unit}.1440 r${name}${unit}.1440
|
|
# ln -f ${name}${unit}.1440 ${name}${unit}135
|
|
# ln -f r${name}${unit}.1440 r${name}${unit}135
|
|
# ln -f ${name}${unit}.1440 ${name}${unit}135ds18
|
|
# ln -f r${name}${unit}.1440 r${name}${unit}135ds18
|
|
# ln -f ${name}${unit}.1440 ${name}${unit}96ds18
|
|
# ln -f r${name}${unit}.1440 r${name}${unit}96ds18
|
|
|
|
mknod ${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4` \
|
|
root:operator
|
|
ln -f ${name}${unit}.1200 r${name}${unit}.1200
|
|
# ln -f ${name}${unit}.1200 ${name}${unit}96
|
|
# ln -f r${name}${unit}.1200 r${name}${unit}96
|
|
# ln -f ${name}${unit}.1200 ${name}${unit}96ds15
|
|
# ln -f r${name}${unit}.1200 r${name}${unit}96ds15
|
|
# ln -f ${name}${unit}.1200 ${name}${unit}135ds15
|
|
# ln -f r${name}${unit}.1200 r${name}${unit}135ds15
|
|
|
|
mknod ${name}${unit}.820 c $chr `expr $unit '*' 64 + 5` \
|
|
root:operator
|
|
ln -f ${name}${unit}.820 r${name}${unit}.820
|
|
# ln -f ${name}${unit}.820 ${name}${unit}96hs10
|
|
# ln -f r${name}${unit}.820 r${name}${unit}96hs10
|
|
# ln -f ${name}${unit}.820 ${name}${unit}135hs10
|
|
# ln -f r${name}${unit}.820 r${name}${unit}135hs10
|
|
|
|
mknod ${name}${unit}.800 c $chr `expr $unit '*' 64 + 6` \
|
|
root:operator
|
|
ln -f ${name}${unit}.800 r${name}${unit}.800
|
|
# ln -f ${name}${unit}.800 ${name}${unit}96ds10
|
|
# ln -f r${name}${unit}.800 r${name}${unit}96ds10
|
|
# ln -f ${name}${unit}.800 ${name}${unit}135ds10
|
|
# ln -f r${name}${unit}.800 r${name}${unit}135ds10
|
|
|
|
mknod ${name}${unit}.720 c $chr `expr $unit '*' 64 + 7` \
|
|
root:operator
|
|
ln -f ${name}${unit}.720 r${name}${unit}.720
|
|
# ln -f ${name}${unit}.720 ${name}${unit}96ds9
|
|
# ln -f r${name}${unit}.720 r${name}${unit}96ds9
|
|
# ln -f ${name}${unit}.720 ${name}${unit}135ds9
|
|
# ln -f r${name}${unit}.720 r${name}${unit}135ds9
|
|
|
|
mknod ${name}${unit}.360 c $chr `expr $unit '*' 64 + 8` \
|
|
root:operator
|
|
ln -f ${name}${unit}.360 r${name}${unit}.360
|
|
# ln -f ${name}${unit}.360 ${name}${unit}48
|
|
# ln -f r${name}${unit}.360 r${name}${unit}48
|
|
# ln -f ${name}${unit}.360 ${name}${unit}48ds9
|
|
# ln -f r${name}${unit}.360 r${name}${unit}48ds9
|
|
|
|
mknod ${name}${unit}.640 c $chr `expr $unit '*' 64 + 9` \
|
|
root:operator
|
|
ln -f ${name}${unit}.640 r${name}${unit}.640
|
|
# ln -f ${name}${unit}.640 ${name}${unit}96ds8
|
|
# ln -f r${name}${unit}.640 r${name}${unit}96ds8
|
|
# ln -f ${name}${unit}.640 ${name}${unit}135ds8
|
|
# ln -f r${name}${unit}.640 r${name}${unit}135ds8
|
|
|
|
mknod ${name}${unit}.1232 c $chr `expr $unit '*' 64 + 10` \
|
|
root:operator
|
|
ln -f ${name}${unit}.1232 r${name}${unit}.1232
|
|
# ln -f ${name}${unit}.1232 ${name}${unit}96ds8
|
|
# ln -f r${name}${unit}.1232 r${name}${unit}96ds8
|
|
# ln -f ${name}${unit}.1232 ${name}${unit}135ds8
|
|
# ln -f r${name}${unit}.1232 r${name}${unit}135ds8
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
ad*|afd*|amrd*|da*|fla*|idad*|md*|mlxd*|twed*|vn*|wd*|wfd*)
|
|
umask $disk_umask
|
|
case $i in
|
|
ad*) name=ad; chr=116;;
|
|
afd*) name=afd; chr=118;;
|
|
amrd*) name=amrd; chr=133;;
|
|
da*) name=da; chr=13;;
|
|
fla*) name=fla; chr=102;;
|
|
idad*) name=idad; chr=109;;
|
|
md*) name=md; chr=95;;
|
|
mlxd*) name=mlxd; chr=131;;
|
|
twed*) name=twed; chr=147;;
|
|
vn*) name=vn; chr=43;;
|
|
wd*) name=wd; chr=3;;
|
|
wfd*) name=wfd; chr=87;;
|
|
esac
|
|
case $i in
|
|
amrd*|idad*|mlxd*|twed*)
|
|
unit=`expr $i : '....\(.*\)'`
|
|
;;
|
|
afd*|fla*|wfd*)
|
|
unit=`expr $i : '...\(.*\)'`
|
|
;;
|
|
*)
|
|
unit=`expr $i : '..\(.*\)'`
|
|
;;
|
|
esac
|
|
case $unit in
|
|
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
|
|
for slicepartname in s0h s1 s2 s3 s4
|
|
do
|
|
sh MAKEDEV $name$unit$slicepartname
|
|
done
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
ccd*)
|
|
umask $disk_umask
|
|
name=ccd
|
|
chr=74
|
|
unit=`expr $i : '...\(.*\)'`
|
|
case $unit in
|
|
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
|
|
for part in 0 1 2 3 4 5 6 7
|
|
do
|
|
minor=`dkminor 0 $unit 0 $part`
|
|
partname=`dkitop $part`
|
|
mknod $name$unit$partname c $chr $minor root:operator
|
|
ln -f $name$unit$partname r$name$unit$partname
|
|
done
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
# SCSI processor type driver
|
|
pt[0-9]*)
|
|
chr=61
|
|
name=pt
|
|
unit=`expr $i : 'pt\([0-9][0-9]*\)'`
|
|
if [ -z "${unit}" ]; then
|
|
unit=0
|
|
fi
|
|
unit=`expr $unit + 1 - 1`
|
|
mknod ${name}${unit} c $chr $unit
|
|
;;
|
|
|
|
# SCSI SES/SAF-TE type driver
|
|
ses[0-9]*)
|
|
chr=110
|
|
name=ses
|
|
unit=`expr $i : 'ses\([0-9][0-9]*\)'`
|
|
if [ -z "${unit}" ]; then
|
|
unit=0
|
|
fi
|
|
unit=`expr $unit + 1 - 1`
|
|
mknod ${name}${unit} c $chr $unit
|
|
;;
|
|
# SCSI target mode sample driver
|
|
targ[0-9]*)
|
|
chr=65
|
|
name=targ
|
|
unit=`expr $i : 'targ\([0-9][0-9]*\)'`
|
|
if [ -z "${unit}" ]; then
|
|
unit=0
|
|
fi
|
|
unit=`expr $unit + 1 - 1`
|
|
mknod ${name}${unit} c $chr $unit
|
|
mknod ${name}.ctl c $chr 0xffff00ff
|
|
;;
|
|
|
|
# CAM transport layer device
|
|
xpt*)
|
|
# This major number is temporary
|
|
chr=104
|
|
name=xpt
|
|
units=`expr $i : 'xpt\(.*\)'`
|
|
if [ -z "${units}" ]; then
|
|
units=1
|
|
fi
|
|
i=0
|
|
while [ $i -lt $units ]; do
|
|
dname=$name$i
|
|
rm -rf $dname r$dname
|
|
mknod $dname c $chr $i root:operator
|
|
i=$(($i + 1))
|
|
done
|
|
;;
|
|
|
|
# CAM passthrough device
|
|
pass*)
|
|
# This major number is temporary
|
|
chr=31
|
|
name=pass
|
|
units=`expr $i : 'pass\(.*\)'`
|
|
if [ -z "${units}" ]; then
|
|
units=1
|
|
fi
|
|
i=0
|
|
while [ $i -lt $units ]; do
|
|
dname=$name$i
|
|
rm -rf $dname r$dname
|
|
mknod $dname c $chr $i root:operator
|
|
i=$(($i + 1))
|
|
done
|
|
;;
|
|
pty*)
|
|
class=`expr $i : 'pty\(.*\)'`
|
|
case $class in
|
|
0) offset=0 name=p;;
|
|
1) offset=32 name=q;;
|
|
2) offset=64 name=r;;
|
|
3) offset=96 name=s;;
|
|
# Note that xterm (at least) only look at p-s.
|
|
4) offset=128 name=P;;
|
|
5) offset=160 name=Q;;
|
|
6) offset=192 name=R;;
|
|
7) offset=224 name=S;;
|
|
# This still leaves [tuTU].
|
|
*) echo bad unit for pty in: $i;;
|
|
esac
|
|
umask 0
|
|
case $class in
|
|
0|1|2|3|4|5|6|7)
|
|
i=0
|
|
while [ $i -lt 32 ]; do
|
|
# This was an awk substr() before.
|
|
c=$(echo 0123456789abcdefghijklmnopqrstuv |
|
|
dd bs=1 skip=$i count=1 2>/dev/null)
|
|
mknod tty$name$c c 5 $(($offset + $i))
|
|
mknod pty$name$c c 6 $(($offset + $i))
|
|
i=$(($i + 1))
|
|
done
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
sa*)
|
|
umask $tape_umask
|
|
unit=`expr $i : '..\(.*\)'`
|
|
chr=14
|
|
|
|
case $unit in
|
|
[0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
|
|
mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
|
|
ln -f sa${unit}.ctl rsa${unit}.ctl
|
|
for m in 0 1 2 3
|
|
do
|
|
mknod sa${unit}.${m} c $chr \
|
|
`saminor 0 ${unit} ${m} 0` root:operator
|
|
ln -f sa${unit}.${m} rsa${unit}.${m}
|
|
mknod nsa${unit}.${m} c $chr \
|
|
`saminor 0 ${unit} ${m} 1` root:operator
|
|
ln -f nsa${unit}.${m} nrsa${unit}.${m}
|
|
mknod esa${unit}.${m} c $chr \
|
|
`saminor 0 ${unit} ${m} 2` root:operator
|
|
ln -f esa${unit}.${m} ersa${unit}.${m}
|
|
done
|
|
ln -f sa${unit}.0 sa${unit}
|
|
ln -f sa${unit}.0 rsa${unit}.0
|
|
ln -f sa${unit}.0 rsa${unit}
|
|
ln -f nsa${unit}.0 nsa${unit}
|
|
ln -f nsa${unit}.0 nrsa${unit}.0
|
|
ln -f nsa${unit}.0 nrsa${unit}
|
|
ln -f esa${unit}.0 esa${unit}
|
|
ln -f esa${unit}.0 ersa${unit}.0
|
|
ln -f esa${unit}.0 ersa${unit}
|
|
;;
|
|
*)
|
|
echo bad unit for tape in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
ch*)
|
|
umask 37
|
|
unit=`expr $i : '..\(.*\)'`
|
|
case $i in
|
|
ch*) name=ch; chr=17;;
|
|
esac
|
|
case $unit in
|
|
0|1|2|3|4|5|6)
|
|
mknod ${name}${unit} c $chr $unit root:operator
|
|
;;
|
|
*)
|
|
echo bad unit for media changer in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
ast*)
|
|
umask 2 ;
|
|
unit=`expr $i : '...\(.*\)'`
|
|
chr=119
|
|
case $unit in
|
|
0|1|2|3)
|
|
mknod rast${unit} c $chr `expr $unit '*' 8 + 0` root:operator
|
|
chmod 640 rast${unit}
|
|
mknod nrast${unit} c $chr `expr $unit '*' 8 + 1` root:operator
|
|
chmod 640 nrast${unit}
|
|
;;
|
|
*)
|
|
echo bad unit for tape in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
acd*|cd*|mcd*|scd*)
|
|
umask $disk_umask
|
|
case $i in
|
|
acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
|
|
cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
|
|
mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
|
|
scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
|
|
esac
|
|
if [ -z "${units}" -o "${units}" -le 0 ]; then
|
|
units=1
|
|
fi
|
|
if [ "${units}" -le 31 ]; then
|
|
i=0
|
|
while [ $i -le $units ]; do
|
|
dname=$name$i
|
|
rm -rf ${dname}* r${dname}*
|
|
mknod ${dname}a c $chr $(($i * 8)) root:operator
|
|
mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator
|
|
ln -f ${dname}a r${dname}a
|
|
ln -f ${dname}c r${dname}c
|
|
i=$(($i + 1))
|
|
done
|
|
else
|
|
echo "$i is invalid -- can't have more than 32 cd devices"
|
|
fi
|
|
umask 77
|
|
;;
|
|
|
|
matcd*)
|
|
umask 2
|
|
case $i in
|
|
matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; chr=46;;
|
|
esac
|
|
case $unit in
|
|
0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15)
|
|
mknod ${name}${unit}a c $chr `expr $unit '*' 8 + 0` \
|
|
root:operator
|
|
mknod ${name}${unit}c c $chr `expr $unit '*' 8 + 2` \
|
|
root:operator
|
|
ln -f ${name}${unit}a r${name}${unit}a
|
|
ln -f ${name}${unit}c r${name}${unit}c
|
|
chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
|
|
|
|
mknod ${name}${unit}la c $chr `expr $unit '*' 8 + 128` \
|
|
root:operator
|
|
mknod ${name}${unit}lc c $chr `expr $unit '*' 8 + 130` \
|
|
root:operator
|
|
ln -f ${name}${unit}la r${name}${unit}la
|
|
ln -f ${name}${unit}lc r${name}${unit}lc
|
|
chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h]
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
wcd*)
|
|
umask 2 ;
|
|
unit=`expr $i : '...\(.*\)'`
|
|
chr=69
|
|
case $unit in
|
|
0|1|2|3|4|5|6|7)
|
|
mknod wcd${unit}a c $chr `expr $unit '*' 8 + 0` root:operator
|
|
mknod wcd${unit}c c $chr `expr $unit '*' 8 + 2` root:operator
|
|
ln -f wcd${unit}a rwcd${unit}a
|
|
ln -f wcd${unit}c rwcd${unit}c
|
|
chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
wst*)
|
|
umask 2 ;
|
|
unit=`expr $i : '...\(.*\)'`
|
|
chr=90
|
|
case $unit in
|
|
0|1|2|3)
|
|
mknod rwst${unit} c $chr `expr $unit '*' 8 + 0` root:operator
|
|
chmod 640 rwst${unit}
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
iic*)
|
|
unit=`expr $i : 'iic\(.*\)'`
|
|
mknod iic$unit c 105 $unit
|
|
;;
|
|
|
|
smb*)
|
|
unit=`expr $i : 'smb\(.*\)'`
|
|
mknod smb$unit c 106 $unit
|
|
;;
|
|
|
|
pcfclock*)
|
|
unit=`expr $i : 'pcfclock\(.*\)'`
|
|
mknod pcfclock$unit c 140 $unit
|
|
;;
|
|
|
|
ppi*)
|
|
unit=`expr $i : 'ppi\(.*\)'`
|
|
mknod ppi$unit c 82 $unit
|
|
;;
|
|
|
|
pps*)
|
|
unit=`expr $i : 'pps\(.*\)'`
|
|
mknod pps$unit c 89 $unit
|
|
;;
|
|
|
|
usb)
|
|
mknod usb$unit c 108 255 root:operator
|
|
chmod 0660 usb$unit
|
|
;;
|
|
|
|
usb*)
|
|
unit=`expr $i : 'usb\(.*\)'`
|
|
mknod usb$unit c 108 $unit root:operator
|
|
chmod 0660 usb$unit
|
|
;;
|
|
|
|
uhid*)
|
|
unit=`expr $i : 'uhid\(.*\)'`
|
|
mknod uhid$unit c 122 $unit
|
|
;;
|
|
|
|
ums*)
|
|
unit=`expr $i : 'ums\(.*\)'`
|
|
mknod ums$unit c 111 $unit
|
|
;;
|
|
|
|
ulpt*)
|
|
unit=`expr $i : 'ulpt\(.*\)'`
|
|
minor=$unit
|
|
mknod ulpt$unit c 113 $minor
|
|
minor=`expr $unit + 64`
|
|
mknod unlpt$unit c 113 $minor # and the 'no prime' version
|
|
;;
|
|
|
|
ugen*)
|
|
unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
|
|
endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
|
|
if [ -z "${unit}" ]; then
|
|
echo $i - Invalid unit number
|
|
fi
|
|
if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15
|
|
mknod ugen$unit c 114 $(($unit * 16))
|
|
i=1
|
|
while [ $i -lt 16 ]; do
|
|
mknod ugen$unit.$i c 114 $(($unit * 16 + $i))
|
|
i=$(($i + 1))
|
|
done
|
|
else
|
|
minor=$(($unit * 16 + $endpoint))
|
|
mknod ugen$unit.$endpoint c 114 $minor
|
|
fi
|
|
;;
|
|
|
|
urio*)
|
|
unit=`expr $i : 'urio\(.*\)'`
|
|
mknod urio$unit c 143 $unit
|
|
;;
|
|
|
|
usio*)
|
|
unit=`expr $i : 'usio\(.*\)'`
|
|
minor=$(($minor + 128))
|
|
mknod usio$unit c 138 $minor
|
|
;;
|
|
|
|
lpt*)
|
|
unit=`expr $i : 'lpt\(.*\)'`
|
|
mknod lpt$unit c 16 $unit
|
|
mknod lpctl$unit c 16 `expr $unit + 128`
|
|
;;
|
|
|
|
tw*)
|
|
unit=`expr $i : 'tw\(.*\)'`
|
|
mknod tw$unit c 19 $unit root:operator
|
|
;;
|
|
|
|
# Use this to create virtual consoles for syscons, pcvt or codrv
|
|
# ttyv0-b
|
|
# use as MAKEDEV vtyNN to create NN entries
|
|
vty*)
|
|
chr=12
|
|
units=`expr $i : 'vty\(.*\)'`
|
|
i=0
|
|
while [ $i -lt $units ]; do
|
|
mknod ttyv$(printf %01x $i) c $chr $i
|
|
i=$(($i + 1))
|
|
done
|
|
ln -fs ttyv0 vga # XXX X still needs this pccons relic
|
|
;;
|
|
|
|
bpf*)
|
|
nbpf=`expr $i : 'bpf\(.*\)$'`
|
|
unit=0
|
|
while [ $unit -le $nbpf ]; do
|
|
mknod bpf$unit c 23 $unit
|
|
unit=$(($unit + 1))
|
|
done
|
|
;;
|
|
|
|
speaker)
|
|
mknod speaker c 26 0
|
|
;;
|
|
|
|
cuaa?|cua?)
|
|
umask 7
|
|
unit=`expr $i : 'cua.*\(.\)$'`
|
|
m=`ttyminor $unit`
|
|
mknod cuaa$unit c 28 `expr $m + 128` uucp:dialer
|
|
mknod cuaia$unit c 28 `expr $m + 32 + 128` uucp:dialer
|
|
mknod cuala$unit c 28 `expr $m + 64 + 128` uucp:dialer
|
|
umask 77
|
|
;;
|
|
|
|
tty0?|ttyd?|tty?)
|
|
unit=`expr $i : 'tty.*\(.\)$'`
|
|
m=`ttyminor $unit`
|
|
mknod ttyd$unit c 28 $m
|
|
mknod ttyid$unit c 28 `expr $m + 32`
|
|
mknod ttyld$unit c 28 `expr $m + 64`
|
|
;;
|
|
|
|
cuac?)
|
|
umask 7
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
|
|
g h i j k l m n o p q r s t u v"
|
|
major=48
|
|
card=`expr $i : 'cua.*\(.\)$'`
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor`
|
|
name=$card$unit
|
|
mknod cuac$name c $major `expr $minor + 128` uucp:dialer
|
|
mknod cuaic$name c $major `expr $minor + 32 + 128` uucp:dialer
|
|
mknod cualc$name c $major `expr $minor + 64 + 128` uucp:dialer
|
|
done
|
|
umask 77
|
|
;;
|
|
|
|
ttyc?)
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
|
|
g h i j k l m n o p q r s t u v"
|
|
major=48
|
|
card=`expr $i : 'tty.*\(.\)$'`
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor`
|
|
name=$card$unit
|
|
mknod ttyc$name c $major $minor
|
|
mknod ttyic$name c $major `expr $minor + 32`
|
|
mknod ttylc$name c $major `expr $minor + 64`
|
|
done
|
|
;;
|
|
|
|
# RISCom8 'rc' driver entries
|
|
|
|
cuam?)
|
|
umask 7
|
|
unit=`expr $i : 'cua.*\(.\)$'`
|
|
m=`ttyminor $unit`
|
|
mknod cuam$unit c 63 `expr $m + 128` uucp:dialer
|
|
umask 77
|
|
;;
|
|
|
|
ttym?)
|
|
unit=`expr $i : 'tty.*\(.\)$'`
|
|
m=`ttyminor $unit`
|
|
mknod ttym$unit c 63 $m
|
|
;;
|
|
|
|
# Specialix SI/XIO.
|
|
# Note: these are 'base 1' to match the numbers on the panels, and to match
|
|
# the manual that comes with the system.
|
|
ttyA*)
|
|
major=68
|
|
nports=`expr $i : 'ttyA\(.*\)$'`
|
|
port=1
|
|
while [ $port -le $nports ]; do
|
|
minor=$(expr $port - 1)
|
|
name=$(printf %02d $port)
|
|
mknod ttyA$name c $major $minor
|
|
mknod ttyiA$name c $major `expr $minor + 65536`
|
|
mknod ttylA$name c $major `expr $minor + 131072`
|
|
port=$(($port + 1))
|
|
done
|
|
# For the user-mode control program, 'sicontrol'
|
|
mknod si_control c 68 262144
|
|
;;
|
|
|
|
cuaA*)
|
|
umask 7
|
|
major=68
|
|
nports=`expr $i : 'cuaA\(.*\)$'`
|
|
port=1
|
|
while [ $port -le $nports ]; do
|
|
minor=$(expr $port - 1)
|
|
name=$(printf %02d $port)
|
|
mknod cuaA$name c $major `expr $minor + 128` uucp:dialer
|
|
mknod cuaiA$name c $major `expr $minor + 128 + 65536` \
|
|
uucp:dialer
|
|
mknod cualA$name c $major `expr $minor + 128 + 131072` \
|
|
uucp:dialer
|
|
port=$(($port + 1))
|
|
done
|
|
umask 77
|
|
;;
|
|
|
|
# Digiboard PC/?? 16 port card.
|
|
# The current scheme of minor numbering is:
|
|
#
|
|
# unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
|
|
#
|
|
# CARD bitfield in future versions may be extended to 3 bits.
|
|
#
|
|
# See dgb(4)
|
|
#
|
|
ttyD?)
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
|
|
major=58
|
|
card=`expr $i : 'tty.*\(.\)$'`
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor`
|
|
name=$card$unit
|
|
mknod ttyD$name c $major $minor
|
|
mknod ttyiD$name c $major `expr $minor + 32`
|
|
mknod ttylD$name c $major `expr $minor + 64`
|
|
done
|
|
;;
|
|
|
|
cuaD?)
|
|
umask 7
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
|
|
major=58
|
|
card=`expr $i : 'cua.*\(.\)$'`
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor`
|
|
name=$card$unit
|
|
mknod cuaD$name c $major `expr $minor + 128` uucp:dialer
|
|
mknod cuaiD$name c $major `expr $minor + 32 + 128` uucp:dialer
|
|
mknod cualD$name c $major `expr $minor + 64 + 128` uucp:dialer
|
|
done
|
|
umask 77
|
|
;;
|
|
|
|
ttyM*)
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
|
|
modulelist="a b c d"
|
|
major=101
|
|
card=`expr $i : 'tty.*\(.\)$'`
|
|
for unit in $modulelist
|
|
do
|
|
moduleminor=`ttyminor $unit`
|
|
moduleminor=`expr $moduleminor % 10 \* 16`
|
|
modulename=$unit
|
|
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor + $moduleminor`
|
|
name=$card$modulename$unit
|
|
rm -f tty*M$name
|
|
mknod ttyM$name c $major $minor
|
|
mknod ttyiM$name c $major `expr $minor + 64`
|
|
mknod ttylM$name c $major `expr $minor + 128`
|
|
done
|
|
done
|
|
;;
|
|
|
|
cuaM?)
|
|
umask 7
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
|
|
modulelist="a b c d"
|
|
major=101
|
|
card=`expr $i : 'cua.*\(.\)$'`
|
|
for unit in $modulelist
|
|
do
|
|
moduleminor=`ttyminor $unit`
|
|
moduleminor=`expr $moduleminor % 10 \* 16`
|
|
modulename=$unit
|
|
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor + $moduleminor`
|
|
name=$card$modulename$unit
|
|
rm -f cua*M$name
|
|
mknod cuaM$name c $major `expr $minor + 262144` \
|
|
uucp:dialer
|
|
mknod cuaiM$name c $major `expr $minor + 64 + 262144` \
|
|
uucp:dialer
|
|
mknod cualM$name c $major `expr $minor + 128 + 262144` \
|
|
uucp:dialer
|
|
done
|
|
done
|
|
umask 77
|
|
;;
|
|
|
|
ttyR?)
|
|
major=81
|
|
BOARD=1; Rnum=0
|
|
MINOR=$(($BOARD * 65536))
|
|
controllers=$(
|
|
dmesg | while read first rest; do
|
|
case "$first" in
|
|
RocketPort[0-4])
|
|
echo "$first"
|
|
;;
|
|
esac
|
|
done
|
|
)
|
|
rm -f /dev/ttyR* /dev/ttyiR* /dev/ttylR*
|
|
for i in $controllers; do
|
|
ndevices=$(
|
|
dmesg | while read first bar ports rest; do
|
|
case "$first" in
|
|
$i*)
|
|
echo "$ports"
|
|
;;
|
|
esac
|
|
done
|
|
)
|
|
echo -n "Creating $ndevices devices for $i: "
|
|
dev=0
|
|
while [ $dev -lt $ndevices ]; do
|
|
mknod /dev/ttyR$Rnum c $major $MINOR
|
|
mknod /dev/ttyiR$Rnum c $major $(($MINOR + 32))
|
|
mknod /dev/ttylR$Rnum c $major $(($MINOR + 64))
|
|
Rnum=$(($Rnum + 1))
|
|
MINOR=$(($MINOR + 1))
|
|
dev=$(($dev + 1))
|
|
done
|
|
BOARD=$(($BOARD + 1))
|
|
MINOR=$(($BOARD * 65536))
|
|
echo " "
|
|
done
|
|
;;
|
|
|
|
cuaR?)
|
|
major=81
|
|
BOARD=1; Rnum=0
|
|
MINOR=$(($BOARD * 65536))
|
|
controllers=$(
|
|
dmesg | while read first rest; do
|
|
case "$first" in
|
|
RocketPort[0-4])
|
|
echo "$first"
|
|
;;
|
|
esac
|
|
done
|
|
)
|
|
rm -f /dev/cuaR* /dev/cuaiR* /dev/cualR*
|
|
for i in $controllers; do
|
|
ndevices=$(
|
|
dmesg | while read first bar ports rest; do
|
|
case "$first" in
|
|
$i*)
|
|
echo "$ports"
|
|
;;
|
|
esac
|
|
done
|
|
)
|
|
echo -n "Creating $ndevices devices for $i: "
|
|
dev=0
|
|
while [ $dev -lt $ndevices ]; do
|
|
mknod /dev/cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer
|
|
mknod /dev/cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
|
|
uucp:dialer
|
|
mknod /dev/cualR$Rnum c $major $(($MINOR + 128 + 64)) \
|
|
uucp:dialer
|
|
Rnum=$(($Rnum + 1))
|
|
MINOR=$(($MINOR + 1))
|
|
dev=$(($dev + 1))
|
|
done
|
|
BOARD=$(($BOARD + 1))
|
|
MINOR=$(($BOARD * 65536))
|
|
echo " "
|
|
done
|
|
;;
|
|
|
|
mse*)
|
|
unit=`expr $i : 'mse\(.*\)'`
|
|
chr=27
|
|
mknod mse$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
|
|
;;
|
|
|
|
psm*)
|
|
unit=`expr $i : 'psm\(.*\)'`
|
|
chr=21
|
|
mknod psm$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
|
|
;;
|
|
|
|
mouse*)
|
|
name=`expr $i : 'mouse\(.*\)'`
|
|
if [ ! -c $name ]; then
|
|
$0 $name # make the appropriate device
|
|
fi
|
|
ln -fs $name mouse
|
|
;;
|
|
|
|
pcaudio)
|
|
mknod pcaudio c 24 0
|
|
mknod pcaudioctl c 24 128
|
|
;;
|
|
|
|
socksys)
|
|
mknod socksys c 41 0
|
|
mknod spx c 41 1
|
|
ln -fs socksys nfsd
|
|
chmod 666 socksys nfsd spx
|
|
;;
|
|
|
|
snd*)
|
|
#
|
|
# changes from Linux voxware
|
|
# minor Linux FreeBSD
|
|
# 8 sequencer2 (aka music0) music0
|
|
# 17 patmgr0 sequencer1
|
|
# 33 patmgr1 sequencer2
|
|
#
|
|
|
|
unit=`expr $i : 'snd\(.*\)'`
|
|
chr=30
|
|
|
|
# XXX write this less verbosely, like std
|
|
snd_security_hole=0 # XXX
|
|
umask $snd_security_hole
|
|
|
|
ln -fs mixer$unit mixer
|
|
ln -fs sequencer$unit sequencer
|
|
ln -fs dsp$unit dsp
|
|
ln -fs audio$unit audio
|
|
ln -fs dspW$unit dspW
|
|
ln -fs music$unit music
|
|
ln -fs pss$unit pss
|
|
|
|
mknod mixer$unit c $chr `expr $unit '*' 16 + 0`
|
|
mknod sequencer$unit c $chr `expr $unit '*' 16 + 1`
|
|
mknod midi$unit c $chr `expr $unit '*' 16 + 2`
|
|
mknod dsp$unit c $chr `expr $unit '*' 16 + 3`
|
|
mknod audio$unit c $chr `expr $unit '*' 16 + 4`
|
|
mknod dspW$unit c $chr `expr $unit '*' 16 + 5`
|
|
mknod sndstat c $chr 6
|
|
# minor number 7 is unused
|
|
mknod music$unit c $chr `expr $unit '*' 16 + 8`
|
|
mknod pss$unit c $chr `expr $unit '*' 16 + 9`
|
|
# minor number 10 is unused
|
|
mknod midistat c $chr 11
|
|
# minor numbers 12-15 are unused
|
|
umask 77
|
|
;;
|
|
|
|
vat)
|
|
mknod vatio c 25 128
|
|
chmod 660 vatio
|
|
;;
|
|
|
|
gsc*)
|
|
unit=`expr $i : 'gsc\(.*\)'`
|
|
mknod gsc${unit} c 47 $unit
|
|
mknod gsc${unit}p c 47 $(($unit + 8))
|
|
mknod gsc${unit}d c 47 $(($unit + 32))
|
|
mknod gsc${unit}pd c 47 $(($unit + 40))
|
|
chmod 666 gsc${unit}*
|
|
;;
|
|
|
|
apm)
|
|
mknod apm c 39 0 root:operator
|
|
chmod 664 apm
|
|
;;
|
|
|
|
apmctl)
|
|
mknod apmctl c 39 8 root:operator
|
|
chmod 660 apmctl
|
|
;;
|
|
|
|
card*)
|
|
unit=`expr $i : 'card\(.*\)'`
|
|
chr=50
|
|
mknod card$unit c $chr $unit
|
|
chmod 644 card$unit
|
|
;;
|
|
|
|
ttyx?|ttyy?|ttyz?)
|
|
case $i in
|
|
*0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
|
|
*4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
|
|
*8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
|
|
*c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
|
|
esac
|
|
case $i in
|
|
ttyy?) unit=`expr $unit \+ 16`;;
|
|
ttyz?) unit=`expr $unit \+ 32`;;
|
|
esac
|
|
mknod $i c 42 $unit
|
|
;;
|
|
|
|
cronyx)
|
|
mknod cronyx c 42 63
|
|
;;
|
|
|
|
joy)
|
|
mknod joy0 c 51 0 root:operator
|
|
mknod joy1 c 51 1 root:operator
|
|
chmod 640 joy0 joy1
|
|
;;
|
|
|
|
spigot)
|
|
mknod spigot c 11 0
|
|
chmod 444 spigot
|
|
;;
|
|
|
|
ctx?)
|
|
unit=`expr $i : 'ctx\(.*\)'`
|
|
mknod ctx$unit c 40 $unit
|
|
chmod 444 ctx$unit
|
|
;;
|
|
|
|
meteor?)
|
|
unit=`expr $i : 'meteor\(.*\)'`
|
|
mknod meteor$unit c 67 $unit
|
|
chmod 444 meteor$unit
|
|
;;
|
|
|
|
bktr?)
|
|
unit=`expr $i : 'bktr\(.*\)'`
|
|
mknod bktr$unit c 92 $unit
|
|
mknod tuner$unit c 92 $((16 + $unit ))
|
|
mknod vbi$unit c 92 $((32 + $unit ))
|
|
chmod 444 bktr$unit tuner$unit vbi$unit
|
|
;;
|
|
|
|
tun*)
|
|
ntun=`expr $i : 'tun\(.*\)$'`
|
|
unit=0
|
|
while [ $unit -le $ntun ]; do
|
|
mknod tun$unit c 52 $unit uucp:dialer
|
|
unit=$(($unit + 1))
|
|
done
|
|
;;
|
|
|
|
tap*)
|
|
ntap=`expr $i : 'tap\(.*\)$'`
|
|
unit=0
|
|
while [ $unit -le $ntap ]; do
|
|
mknod tap$unit c 149 $unit root:network
|
|
unit=$(($unit + 1))
|
|
done
|
|
;;
|
|
|
|
sysmouse)
|
|
mknod sysmouse c 12 128
|
|
mknod consolectl c 12 255
|
|
;;
|
|
|
|
snp?)
|
|
unit=`expr $i : 'snp\(.*\)'`
|
|
mknod snp$unit c 53 $unit
|
|
;;
|
|
|
|
# dufault@hda.com: If I do much more work on other A-D boards
|
|
# then eventually we'll have a "ad" and "dio" interface and some of these
|
|
# "labpcaio" ones will be gone.
|
|
# labpcaio: D-A and A-D.
|
|
# labpcdio: Digital in and Digital out.
|
|
#
|
|
labpc*)
|
|
umask 7
|
|
case $i in
|
|
labpcaio*)
|
|
name=labpcaio
|
|
unit=`expr $i : 'labpcaio\(.*\)'`
|
|
all="0 1 2 3 4 5 6 7"
|
|
offset=0
|
|
;;
|
|
labpcdio*)
|
|
name=labpcdio
|
|
unit=`expr $i : 'labpcdio\(.*\)'`
|
|
all="0 1 2 3"
|
|
offset=8
|
|
;;
|
|
*)
|
|
die 3 "Don't know LabPC type $i"
|
|
;;
|
|
esac
|
|
if [ -z "${unit}" ]; then
|
|
unit=all
|
|
fi
|
|
case $unit in
|
|
0|1|2|3|4|5|6|7)
|
|
mknod $name$unit c 66 `expr $offset + $unit `
|
|
;;
|
|
all)
|
|
for i in $all
|
|
do
|
|
mknod $name$i c 66 `expr $offset + $i `
|
|
done
|
|
;;
|
|
*)
|
|
echo "No such LabPC unit: $unit"
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
perfmon)
|
|
mknod perfmon c 2 32 root:kmem
|
|
chmod 640 perfmon
|
|
;;
|
|
|
|
ipl)
|
|
mknod ipl c 79 0
|
|
mknod ipnat c 79 1
|
|
mknod ipstate c 79 2
|
|
mknod ipauth c 79 3
|
|
;;
|
|
|
|
kbd*)
|
|
unit=`expr $i : 'kbd\(.*\)'`
|
|
chr=112
|
|
mknod kbd$unit c $chr $unit
|
|
;;
|
|
|
|
i4b)
|
|
mknod i4b c 60 0
|
|
;;
|
|
|
|
i4bctl)
|
|
mknod i4bctl c 55 0
|
|
;;
|
|
|
|
i4brbch*)
|
|
unit=`expr $i : 'i4brbch\(.*\)'`
|
|
mknod i4brbch$unit c 57 $unit
|
|
;;
|
|
|
|
i4bteld*)
|
|
offset=64
|
|
unit=`expr $i : 'i4bteld\(.*\)'`
|
|
mknod i4bteld$unit c 56 `expr $offset + $unit `
|
|
;;
|
|
|
|
i4btel*)
|
|
unit=`expr $i : 'i4btel\(.*\)'`
|
|
mknod i4btel$unit c 56 $unit
|
|
;;
|
|
|
|
i4btrc*)
|
|
unit=`expr $i : 'i4btrc\(.*\)'`
|
|
mknod i4btrc$unit c 59 $unit
|
|
;;
|
|
|
|
mlx*)
|
|
unit=`expr $i : 'mlx\(.*\)'`
|
|
mknod mlx$unit c 130 $unit
|
|
;;
|
|
|
|
3dfx*)
|
|
unit=`expr $i : '3dfx\(.*\)'`
|
|
mknod 3dfx$unit c 107 $unit
|
|
ln -sf 3dfx$unit 3dfx
|
|
;;
|
|
|
|
agpgart)
|
|
mknod agpgart c 148 0
|
|
;;
|
|
|
|
twe*)
|
|
unit=`expr $i : 'twe\(.*\)'`
|
|
mknod twe$unit c 146 $unit
|
|
;;
|
|
|
|
local)
|
|
umask 0 # XXX should be elsewhere
|
|
sh MAKEDEV.local
|
|
umask 77
|
|
;;
|
|
|
|
*)
|
|
echo $i - no such device name
|
|
;;
|
|
|
|
esac
|
|
done
|