7a689f1781
chipset found in some models of Powermac G5. Approved by: nwhitehorn (mentor)
445 lines
11 KiB
C
445 lines
11 KiB
C
/*-
|
|
* Copyright (c) 2001 Tsubai Masanari. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
* NetBSD: ki2c.c,v 1.11 2007/12/06 17:00:33 ad Exp
|
|
* Id: ki2c.c,v 1.7 2002/10/05 09:56:05 tsubai Exp
|
|
*/
|
|
|
|
/*
|
|
* Support routines for the Keywest I2C controller.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/iicbus/iicbus.h>
|
|
#include <dev/iicbus/iiconf.h>
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include "iicbus_if.h"
|
|
|
|
/* Keywest I2C Register offsets */
|
|
#define MODE 0
|
|
#define CONTROL 1
|
|
#define STATUS 2
|
|
#define ISR 3
|
|
#define IER 4
|
|
#define ADDR 5
|
|
#define SUBADDR 6
|
|
#define DATA 7
|
|
#define REV 8
|
|
|
|
/* MODE */
|
|
#define I2C_SPEED 0x03 /* Speed mask */
|
|
#define I2C_100kHz 0x00
|
|
#define I2C_50kHz 0x01
|
|
#define I2C_25kHz 0x02
|
|
#define I2C_MODE 0x0c /* Mode mask */
|
|
#define I2C_DUMBMODE 0x00 /* Dumb mode */
|
|
#define I2C_STDMODE 0x04 /* Standard mode */
|
|
#define I2C_STDSUBMODE 0x08 /* Standard mode + sub address */
|
|
#define I2C_COMBMODE 0x0c /* Combined mode */
|
|
#define I2C_PORT 0xf0 /* Port mask */
|
|
|
|
/* CONTROL */
|
|
#define I2C_CT_AAK 0x01 /* Send AAK */
|
|
#define I2C_CT_ADDR 0x02 /* Send address(es) */
|
|
#define I2C_CT_STOP 0x04 /* Send STOP */
|
|
#define I2C_CT_START 0x08 /* Send START */
|
|
|
|
/* STATUS */
|
|
#define I2C_ST_BUSY 0x01 /* Busy */
|
|
#define I2C_ST_LASTAAK 0x02 /* Last AAK */
|
|
#define I2C_ST_LASTRW 0x04 /* Last R/W */
|
|
#define I2C_ST_SDA 0x08 /* SDA */
|
|
#define I2C_ST_SCL 0x10 /* SCL */
|
|
|
|
/* ISR/IER */
|
|
#define I2C_INT_DATA 0x01 /* Data byte sent/received */
|
|
#define I2C_INT_ADDR 0x02 /* Address sent */
|
|
#define I2C_INT_STOP 0x04 /* STOP condition sent */
|
|
#define I2C_INT_START 0x08 /* START condition sent */
|
|
|
|
/* I2C flags */
|
|
#define I2C_BUSY 0x01
|
|
#define I2C_READING 0x02
|
|
#define I2C_ERROR 0x04
|
|
#define I2C_SELECTED 0x08
|
|
|
|
struct kiic_softc {
|
|
device_t sc_dev;
|
|
phandle_t sc_node;
|
|
struct mtx sc_mutex;
|
|
struct resource *sc_reg;
|
|
int sc_irqrid;
|
|
struct resource *sc_irq;
|
|
void *sc_ih;
|
|
u_int sc_regstep;
|
|
u_int sc_flags;
|
|
u_char *sc_data;
|
|
int sc_resid;
|
|
uint16_t sc_i2c_base;
|
|
device_t sc_iicbus;
|
|
};
|
|
|
|
static int kiic_probe(device_t dev);
|
|
static int kiic_attach(device_t dev);
|
|
static void kiic_writereg(struct kiic_softc *sc, u_int, u_int);
|
|
static u_int kiic_readreg(struct kiic_softc *, u_int);
|
|
static void kiic_setport(struct kiic_softc *, u_int);
|
|
static void kiic_setmode(struct kiic_softc *, u_int);
|
|
static void kiic_setspeed(struct kiic_softc *, u_int);
|
|
static void kiic_intr(void *xsc);
|
|
static int kiic_transfer(device_t dev, struct iic_msg *msgs,
|
|
uint32_t nmsgs);
|
|
static phandle_t kiic_get_node(device_t bus, device_t dev);
|
|
|
|
static device_method_t kiic_methods[] = {
|
|
/* device interface */
|
|
DEVMETHOD(device_probe, kiic_probe),
|
|
DEVMETHOD(device_attach, kiic_attach),
|
|
|
|
/* iicbus interface */
|
|
DEVMETHOD(iicbus_callback, iicbus_null_callback),
|
|
DEVMETHOD(iicbus_transfer, kiic_transfer),
|
|
|
|
/* ofw_bus interface */
|
|
DEVMETHOD(ofw_bus_get_node, kiic_get_node),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t kiic_driver = {
|
|
"iichb",
|
|
kiic_methods,
|
|
sizeof(struct kiic_softc)
|
|
};
|
|
static devclass_t kiic_devclass;
|
|
|
|
DRIVER_MODULE(kiic, macio, kiic_driver, kiic_devclass, 0, 0);
|
|
DRIVER_MODULE(kiic, unin, kiic_driver, kiic_devclass, 0, 0);
|
|
|
|
static int
|
|
kiic_probe(device_t self)
|
|
{
|
|
const char *name;
|
|
|
|
name = ofw_bus_get_name(self);
|
|
if (name && strcmp(name, "i2c") == 0) {
|
|
device_set_desc(self, "Keywest I2C controller");
|
|
return (0);
|
|
}
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
kiic_attach(device_t self)
|
|
{
|
|
struct kiic_softc *sc = device_get_softc(self);
|
|
int rid, rate;
|
|
phandle_t node;
|
|
char name[64];
|
|
|
|
bzero(sc, sizeof(*sc));
|
|
sc->sc_dev = self;
|
|
|
|
node = ofw_bus_get_node(self);
|
|
if (node == 0 || node == -1) {
|
|
return (EINVAL);
|
|
}
|
|
|
|
rid = 0;
|
|
sc->sc_reg = bus_alloc_resource_any(self, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE);
|
|
if (sc->sc_reg == NULL) {
|
|
return (ENOMEM);
|
|
}
|
|
|
|
if (OF_getprop(node, "AAPL,i2c-rate", &rate, 4) != 4) {
|
|
device_printf(self, "cannot get i2c-rate\n");
|
|
return (ENXIO);
|
|
}
|
|
if (OF_getprop(node, "AAPL,address-step", &sc->sc_regstep, 4) != 4) {
|
|
device_printf(self, "unable to find i2c address step\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Some Keywest I2C devices have their children attached directly
|
|
* underneath them. Some have a single 'iicbus' child with the
|
|
* devices underneath that. Sort this out, and make sure that the
|
|
* OFW I2C layer has the correct node.
|
|
*
|
|
* Note: the I2C children of the Uninorth bridges have two ports.
|
|
* In general, the port is designated in the 9th bit of the I2C
|
|
* address. However, for kiic devices with children attached below
|
|
* an i2c-bus node, the port is indicated in the 'reg' property
|
|
* of the i2c-bus node.
|
|
*/
|
|
|
|
sc->sc_node = node;
|
|
|
|
node = OF_child(node);
|
|
if (OF_getprop(node, "name", name, sizeof(name)) > 0) {
|
|
if (strcmp(name,"i2c-bus") == 0) {
|
|
phandle_t reg;
|
|
if (OF_getprop(node, "reg", ®, sizeof(reg)) > 0)
|
|
sc->sc_i2c_base = reg << 8;
|
|
|
|
sc->sc_node = node;
|
|
}
|
|
}
|
|
|
|
mtx_init(&sc->sc_mutex, "kiic", NULL, MTX_DEF);
|
|
|
|
sc->sc_irq = bus_alloc_resource_any(self, SYS_RES_IRQ, &sc->sc_irqrid,
|
|
RF_ACTIVE);
|
|
bus_setup_intr(self, sc->sc_irq, INTR_TYPE_MISC | INTR_MPSAFE, NULL,
|
|
kiic_intr, sc, &sc->sc_ih);
|
|
|
|
kiic_writereg(sc, ISR, kiic_readreg(sc, ISR));
|
|
kiic_writereg(sc, STATUS, 0);
|
|
kiic_writereg(sc, IER, 0);
|
|
|
|
kiic_setmode(sc, I2C_STDMODE);
|
|
kiic_setspeed(sc, I2C_100kHz); /* XXX rate */
|
|
|
|
kiic_writereg(sc, IER, I2C_INT_DATA | I2C_INT_ADDR | I2C_INT_STOP);
|
|
|
|
if (bootverbose)
|
|
device_printf(self, "Revision: %02X\n", kiic_readreg(sc, REV));
|
|
|
|
/* Add the IIC bus layer */
|
|
sc->sc_iicbus = device_add_child(self, "iicbus", -1);
|
|
|
|
return (bus_generic_attach(self));
|
|
}
|
|
|
|
static void
|
|
kiic_writereg(struct kiic_softc *sc, u_int reg, u_int val)
|
|
{
|
|
bus_write_4(sc->sc_reg, sc->sc_regstep * reg, val);
|
|
DELAY(100); /* register access delay */
|
|
}
|
|
|
|
static u_int
|
|
kiic_readreg(struct kiic_softc *sc, u_int reg)
|
|
{
|
|
return bus_read_4(sc->sc_reg, sc->sc_regstep * reg) & 0xff;
|
|
}
|
|
|
|
static void
|
|
kiic_setmode(struct kiic_softc *sc, u_int mode)
|
|
{
|
|
u_int x;
|
|
|
|
KASSERT((mode & ~I2C_MODE) == 0, ("bad mode"));
|
|
x = kiic_readreg(sc, MODE);
|
|
x &= ~I2C_MODE;
|
|
x |= mode;
|
|
kiic_writereg(sc, MODE, x);
|
|
}
|
|
|
|
static void
|
|
kiic_setport(struct kiic_softc *sc, u_int port)
|
|
{
|
|
u_int x;
|
|
|
|
KASSERT(port == 1 || port == 0, ("bad port"));
|
|
x = kiic_readreg(sc, MODE);
|
|
x &= ~I2C_PORT;
|
|
x |= (port << 4);
|
|
kiic_writereg(sc, MODE, x);
|
|
}
|
|
|
|
static void
|
|
kiic_setspeed(struct kiic_softc *sc, u_int speed)
|
|
{
|
|
u_int x;
|
|
|
|
KASSERT((speed & ~I2C_SPEED) == 0, ("bad speed"));
|
|
x = kiic_readreg(sc, MODE);
|
|
x &= ~I2C_SPEED;
|
|
x |= speed;
|
|
kiic_writereg(sc, MODE, x);
|
|
}
|
|
|
|
static void
|
|
kiic_intr(void *xsc)
|
|
{
|
|
struct kiic_softc *sc = xsc;
|
|
u_int isr;
|
|
uint32_t x;
|
|
|
|
mtx_lock(&sc->sc_mutex);
|
|
isr = kiic_readreg(sc, ISR);
|
|
|
|
if (isr & I2C_INT_ADDR) {
|
|
sc->sc_flags |= I2C_SELECTED;
|
|
|
|
if (sc->sc_flags & I2C_READING) {
|
|
if (sc->sc_resid > 1) {
|
|
x = kiic_readreg(sc, CONTROL);
|
|
x |= I2C_CT_AAK;
|
|
kiic_writereg(sc, CONTROL, x);
|
|
}
|
|
} else {
|
|
kiic_writereg(sc, DATA, *sc->sc_data++);
|
|
sc->sc_resid--;
|
|
}
|
|
}
|
|
|
|
if (isr & I2C_INT_DATA) {
|
|
if (sc->sc_flags & I2C_READING) {
|
|
if (sc->sc_resid > 0) {
|
|
*sc->sc_data++ = kiic_readreg(sc, DATA);
|
|
sc->sc_resid--;
|
|
}
|
|
if (sc->sc_resid == 0) /* done */
|
|
kiic_writereg(sc, CONTROL, 0);
|
|
} else {
|
|
if (sc->sc_resid == 0) {
|
|
x = kiic_readreg(sc, CONTROL);
|
|
x |= I2C_CT_STOP;
|
|
kiic_writereg(sc, CONTROL, x);
|
|
} else {
|
|
kiic_writereg(sc, DATA, *sc->sc_data++);
|
|
sc->sc_resid--;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (isr & I2C_INT_STOP) {
|
|
kiic_writereg(sc, CONTROL, 0);
|
|
sc->sc_flags &= ~I2C_SELECTED;
|
|
wakeup(sc->sc_dev);
|
|
}
|
|
|
|
kiic_writereg(sc, ISR, isr);
|
|
mtx_unlock(&sc->sc_mutex);
|
|
}
|
|
|
|
static int
|
|
kiic_transfer(device_t dev, struct iic_msg *msgs, uint32_t nmsgs)
|
|
{
|
|
struct kiic_softc *sc;
|
|
int i, x, timo, err;
|
|
uint16_t addr;
|
|
uint8_t subaddr;
|
|
|
|
sc = device_get_softc(dev);
|
|
timo = 100;
|
|
subaddr = 0;
|
|
|
|
mtx_lock(&sc->sc_mutex);
|
|
|
|
if (sc->sc_flags & I2C_BUSY)
|
|
mtx_sleep(dev, &sc->sc_mutex, 0, "kiic", timo);
|
|
|
|
if (sc->sc_flags & I2C_BUSY) {
|
|
mtx_unlock(&sc->sc_mutex);
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
sc->sc_flags = I2C_BUSY;
|
|
|
|
/* Clear pending interrupts, and reset controller */
|
|
kiic_writereg(sc, ISR, kiic_readreg(sc, ISR));
|
|
kiic_writereg(sc, STATUS, 0);
|
|
|
|
for (i = 0; i < nmsgs; i++) {
|
|
if (msgs[i].flags & IIC_M_NOSTOP) {
|
|
if (msgs[i+1].flags & IIC_M_RD)
|
|
kiic_setmode(sc, I2C_COMBMODE);
|
|
else
|
|
kiic_setmode(sc, I2C_STDSUBMODE);
|
|
KASSERT(msgs[i].len == 1, ("oversize I2C message"));
|
|
subaddr = msgs[i].buf[0];
|
|
i++;
|
|
} else {
|
|
kiic_setmode(sc, I2C_STDMODE);
|
|
}
|
|
|
|
sc->sc_data = msgs[i].buf;
|
|
sc->sc_resid = msgs[i].len;
|
|
sc->sc_flags = I2C_BUSY;
|
|
addr = msgs[i].slave;
|
|
timo = 1000 + sc->sc_resid * 200;
|
|
timo += 100000;
|
|
|
|
if (msgs[i].flags & IIC_M_RD) {
|
|
sc->sc_flags |= I2C_READING;
|
|
addr |= 1;
|
|
}
|
|
|
|
addr |= sc->sc_i2c_base;
|
|
|
|
kiic_setport(sc, (addr & 0x100) >> 8);
|
|
kiic_writereg(sc, ADDR, addr & 0xff);
|
|
kiic_writereg(sc, SUBADDR, subaddr);
|
|
|
|
x = kiic_readreg(sc, CONTROL) | I2C_CT_ADDR;
|
|
kiic_writereg(sc, CONTROL, x);
|
|
|
|
err = mtx_sleep(dev, &sc->sc_mutex, 0, "kiic", timo);
|
|
|
|
msgs[i].len -= sc->sc_resid;
|
|
|
|
if ((sc->sc_flags & I2C_ERROR) || err == EWOULDBLOCK) {
|
|
device_printf(sc->sc_dev, "I2C error\n");
|
|
sc->sc_flags = 0;
|
|
mtx_unlock(&sc->sc_mutex);
|
|
return (-1);
|
|
}
|
|
}
|
|
|
|
sc->sc_flags = 0;
|
|
|
|
mtx_unlock(&sc->sc_mutex);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static phandle_t
|
|
kiic_get_node(device_t bus, device_t dev)
|
|
{
|
|
struct kiic_softc *sc;
|
|
|
|
sc = device_get_softc(bus);
|
|
/* We only have one child, the I2C bus, which needs our own node. */
|
|
|
|
return sc->sc_node;
|
|
}
|
|
|