6f0e1ffd07
src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h" |
||
|---|---|---|
| .. | ||
| BIND.chroot.dist | ||
| BIND.include.dist | ||
| BSD.include.dist | ||
| BSD.local.dist | ||
| BSD.release.dist | ||
| BSD.root.dist | ||
| BSD.sendmail.dist | ||
| BSD.usr.dist | ||
| BSD.var.dist | ||
| BSD.x11-4.dist | ||
| BSD.x11.dist | ||
| Makefile | ||
| README | ||
$FreeBSD$
Note: If you modify these files, please keep hier(7) updated!
These files are used to create empty file hierarchies for building the
system into. Some notes about working with them are placed here to try
and keep them in good working order.
a) The files use 4 space indentation, and other than in the header
comments, should not contain any tabs. An indentation of 4 is
preferable to the standard indentation of 8 because the indentation
of levels in these files can become quite deep causing the line to
overflow 80 characters.
This also matches with the files generated when using the
mtree -c option, which was implemented that way for the same reason.
b) Only directories should be listed here.
c) The listing should be kept in filename sorted order.
d) Sanity checking changes to these files can be done by following
this procedure (the sed -e is ugly, but fixing mtree -c to
not emit the trailing white space would be even uglier):
mkdir /tmp/MTREE
mtree -deU -f BSD.X.dist -p /tmp/MTREE
mtree -cdin -k uname,gname,mode -p /tmp/MTREE | \
sed -e 's/ *$//' >BSD.X.new
diff -u BSD.X.dist BSD.X.new
rm -r /tmp/MTREE
Note that you will get some differences about /set lines,
and uname= gname= on certain directory areas, mainly man page
sections. This is caused by mtree not having a look ahead
mechanism for making better selections for these as it
traverses the hierarchy.
The BSD.X.new file should NOT be commited, will be missing the
correct header, and important keywords like ``nochange''. Simply
use the diff for a sanity check to make sure things are in the
correct order and correctly indented.
e) Further sanity checking of the system builds with DESTDIR=/someplace
are more complicated, but can often catch missing entries in these
files. I tend to run this more complete sanity check shortly after
the target date for a new release is announced.
If you want details on it bug me about it via email to
rgrimes@FreeBSD.org.