8fddc417c9
errors. Without this fix you can't even scan the bus (all operations will always succeed). MFC with: r273337 Pointy hat to: loos
528 lines
13 KiB
C
528 lines
13 KiB
C
/*-
|
|
* Copyright (c) 2001 Tsubai Masanari.
|
|
* Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
|
|
* Copyright (c) 2013 Luiz Otavio O Souza <loos@freebsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <dev/iicbus/iicbus.h>
|
|
#include <dev/iicbus/iiconf.h>
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
#include <arm/broadcom/bcm2835/bcm2835_gpio.h>
|
|
#include <arm/broadcom/bcm2835/bcm2835_bscreg.h>
|
|
#include <arm/broadcom/bcm2835/bcm2835_bscvar.h>
|
|
|
|
#include "iicbus_if.h"
|
|
|
|
static void bcm_bsc_intr(void *);
|
|
|
|
static void
|
|
bcm_bsc_modifyreg(struct bcm_bsc_softc *sc, uint32_t off, uint32_t mask,
|
|
uint32_t value)
|
|
{
|
|
uint32_t reg;
|
|
|
|
mtx_assert(&sc->sc_mtx, MA_OWNED);
|
|
reg = BCM_BSC_READ(sc, off);
|
|
reg &= ~mask;
|
|
reg |= value;
|
|
BCM_BSC_WRITE(sc, off, reg);
|
|
}
|
|
|
|
static int
|
|
bcm_bsc_clock_proc(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm_bsc_softc *sc;
|
|
uint32_t clk;
|
|
int error;
|
|
|
|
sc = (struct bcm_bsc_softc *)arg1;
|
|
|
|
BCM_BSC_LOCK(sc);
|
|
clk = BCM_BSC_READ(sc, BCM_BSC_CLOCK);
|
|
BCM_BSC_UNLOCK(sc);
|
|
clk &= 0xffff;
|
|
if (clk == 0)
|
|
clk = 32768;
|
|
clk = BCM_BSC_CORE_CLK / clk;
|
|
error = sysctl_handle_int(oidp, &clk, sizeof(clk), req);
|
|
if (error != 0 || req->newptr == NULL)
|
|
return (error);
|
|
|
|
clk = BCM_BSC_CORE_CLK / clk;
|
|
if (clk % 2)
|
|
clk--;
|
|
if (clk > 0xffff)
|
|
clk = 0xffff;
|
|
BCM_BSC_LOCK(sc);
|
|
BCM_BSC_WRITE(sc, BCM_BSC_CLOCK, clk);
|
|
BCM_BSC_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bcm_bsc_clkt_proc(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm_bsc_softc *sc;
|
|
uint32_t clkt;
|
|
int error;
|
|
|
|
sc = (struct bcm_bsc_softc *)arg1;
|
|
|
|
BCM_BSC_LOCK(sc);
|
|
clkt = BCM_BSC_READ(sc, BCM_BSC_CLKT);
|
|
BCM_BSC_UNLOCK(sc);
|
|
clkt &= 0xffff;
|
|
error = sysctl_handle_int(oidp, &clkt, sizeof(clkt), req);
|
|
if (error != 0 || req->newptr == NULL)
|
|
return (error);
|
|
|
|
BCM_BSC_LOCK(sc);
|
|
BCM_BSC_WRITE(sc, BCM_BSC_CLKT, clkt & 0xffff);
|
|
BCM_BSC_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bcm_bsc_fall_proc(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm_bsc_softc *sc;
|
|
uint32_t clk, reg;
|
|
int error;
|
|
|
|
sc = (struct bcm_bsc_softc *)arg1;
|
|
|
|
BCM_BSC_LOCK(sc);
|
|
reg = BCM_BSC_READ(sc, BCM_BSC_DELAY);
|
|
BCM_BSC_UNLOCK(sc);
|
|
reg >>= 16;
|
|
error = sysctl_handle_int(oidp, ®, sizeof(reg), req);
|
|
if (error != 0 || req->newptr == NULL)
|
|
return (error);
|
|
|
|
BCM_BSC_LOCK(sc);
|
|
clk = BCM_BSC_READ(sc, BCM_BSC_CLOCK);
|
|
clk = BCM_BSC_CORE_CLK / clk;
|
|
if (reg > clk / 2)
|
|
reg = clk / 2 - 1;
|
|
bcm_bsc_modifyreg(sc, BCM_BSC_DELAY, 0xffff0000, reg << 16);
|
|
BCM_BSC_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bcm_bsc_rise_proc(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bcm_bsc_softc *sc;
|
|
uint32_t clk, reg;
|
|
int error;
|
|
|
|
sc = (struct bcm_bsc_softc *)arg1;
|
|
|
|
BCM_BSC_LOCK(sc);
|
|
reg = BCM_BSC_READ(sc, BCM_BSC_DELAY);
|
|
BCM_BSC_UNLOCK(sc);
|
|
reg &= 0xffff;
|
|
error = sysctl_handle_int(oidp, ®, sizeof(reg), req);
|
|
if (error != 0 || req->newptr == NULL)
|
|
return (error);
|
|
|
|
BCM_BSC_LOCK(sc);
|
|
clk = BCM_BSC_READ(sc, BCM_BSC_CLOCK);
|
|
clk = BCM_BSC_CORE_CLK / clk;
|
|
if (reg > clk / 2)
|
|
reg = clk / 2 - 1;
|
|
bcm_bsc_modifyreg(sc, BCM_BSC_DELAY, 0xffff, reg);
|
|
BCM_BSC_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bcm_bsc_sysctl_init(struct bcm_bsc_softc *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid *tree_node;
|
|
struct sysctl_oid_list *tree;
|
|
|
|
/*
|
|
* Add system sysctl tree/handlers.
|
|
*/
|
|
ctx = device_get_sysctl_ctx(sc->sc_dev);
|
|
tree_node = device_get_sysctl_tree(sc->sc_dev);
|
|
tree = SYSCTL_CHILDREN(tree_node);
|
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "clock",
|
|
CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc),
|
|
bcm_bsc_clock_proc, "IU", "I2C BUS clock frequency");
|
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "clock_stretch",
|
|
CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc),
|
|
bcm_bsc_clkt_proc, "IU", "I2C BUS clock stretch timeout");
|
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "fall_edge_delay",
|
|
CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc),
|
|
bcm_bsc_fall_proc, "IU", "I2C BUS falling edge delay");
|
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "rise_edge_delay",
|
|
CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc),
|
|
bcm_bsc_rise_proc, "IU", "I2C BUS rising edge delay");
|
|
}
|
|
|
|
static void
|
|
bcm_bsc_reset(struct bcm_bsc_softc *sc)
|
|
{
|
|
|
|
/* Enable the BSC Controller, disable interrupts. */
|
|
BCM_BSC_WRITE(sc, BCM_BSC_CTRL, BCM_BSC_CTRL_I2CEN);
|
|
/* Clear pending interrupts. */
|
|
BCM_BSC_WRITE(sc, BCM_BSC_STATUS, BCM_BSC_STATUS_CLKT |
|
|
BCM_BSC_STATUS_ERR | BCM_BSC_STATUS_DONE);
|
|
/* Clear the FIFO. */
|
|
bcm_bsc_modifyreg(sc, BCM_BSC_CTRL, BCM_BSC_CTRL_CLEAR0,
|
|
BCM_BSC_CTRL_CLEAR0);
|
|
}
|
|
|
|
static int
|
|
bcm_bsc_probe(device_t dev)
|
|
{
|
|
|
|
if (!ofw_bus_status_okay(dev))
|
|
return (ENXIO);
|
|
|
|
if (!ofw_bus_is_compatible(dev, "broadcom,bcm2835-bsc"))
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "BCM2708/2835 BSC controller");
|
|
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
bcm_bsc_attach(device_t dev)
|
|
{
|
|
struct bcm_bsc_softc *sc;
|
|
unsigned long start;
|
|
device_t gpio;
|
|
int i, rid;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->sc_dev = dev;
|
|
|
|
rid = 0;
|
|
sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (!sc->sc_mem_res) {
|
|
device_printf(dev, "cannot allocate memory window\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
sc->sc_bst = rman_get_bustag(sc->sc_mem_res);
|
|
sc->sc_bsh = rman_get_bushandle(sc->sc_mem_res);
|
|
|
|
/* Check the unit we are attaching by its base address. */
|
|
start = rman_get_start(sc->sc_mem_res);
|
|
for (i = 0; i < nitems(bcm_bsc_pins); i++) {
|
|
if (bcm_bsc_pins[i].start == start)
|
|
break;
|
|
}
|
|
if (i == nitems(bcm_bsc_pins)) {
|
|
device_printf(dev, "only bsc0 and bsc1 are supported\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Configure the GPIO pins to ALT0 function to enable BSC control
|
|
* over the pins.
|
|
*/
|
|
gpio = devclass_get_device(devclass_find("gpio"), 0);
|
|
if (!gpio) {
|
|
device_printf(dev, "cannot find gpio0\n");
|
|
return (ENXIO);
|
|
}
|
|
bcm_gpio_set_alternate(gpio, bcm_bsc_pins[i].sda, BCM_GPIO_ALT0);
|
|
bcm_gpio_set_alternate(gpio, bcm_bsc_pins[i].scl, BCM_GPIO_ALT0);
|
|
|
|
rid = 0;
|
|
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_ACTIVE | RF_SHAREABLE);
|
|
if (!sc->sc_irq_res) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
|
|
device_printf(dev, "cannot allocate interrupt\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* Hook up our interrupt handler. */
|
|
if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
|
|
NULL, bcm_bsc_intr, sc, &sc->sc_intrhand)) {
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
|
|
device_printf(dev, "cannot setup the interrupt handler\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
mtx_init(&sc->sc_mtx, "bcm_bsc", NULL, MTX_DEF);
|
|
|
|
bcm_bsc_sysctl_init(sc);
|
|
|
|
/* Enable the BSC controller. Flush the FIFO. */
|
|
BCM_BSC_LOCK(sc);
|
|
bcm_bsc_reset(sc);
|
|
BCM_BSC_UNLOCK(sc);
|
|
|
|
device_add_child(dev, "iicbus", -1);
|
|
|
|
return (bus_generic_attach(dev));
|
|
}
|
|
|
|
static int
|
|
bcm_bsc_detach(device_t dev)
|
|
{
|
|
struct bcm_bsc_softc *sc;
|
|
|
|
bus_generic_detach(dev);
|
|
|
|
sc = device_get_softc(dev);
|
|
mtx_destroy(&sc->sc_mtx);
|
|
if (sc->sc_intrhand)
|
|
bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_intrhand);
|
|
if (sc->sc_irq_res)
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res);
|
|
if (sc->sc_mem_res)
|
|
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bcm_bsc_intr(void *arg)
|
|
{
|
|
struct bcm_bsc_softc *sc;
|
|
uint32_t status;
|
|
|
|
sc = (struct bcm_bsc_softc *)arg;
|
|
|
|
BCM_BSC_LOCK(sc);
|
|
|
|
/* The I2C interrupt is shared among all the BSC controllers. */
|
|
if ((sc->sc_flags & BCM_I2C_BUSY) == 0) {
|
|
BCM_BSC_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
status = BCM_BSC_READ(sc, BCM_BSC_STATUS);
|
|
|
|
/* Check for errors. */
|
|
if (status & (BCM_BSC_STATUS_CLKT | BCM_BSC_STATUS_ERR)) {
|
|
/* Disable interrupts. */
|
|
bcm_bsc_reset(sc);
|
|
sc->sc_flags |= BCM_I2C_ERROR;
|
|
wakeup(sc->sc_dev);
|
|
BCM_BSC_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
if (sc->sc_flags & BCM_I2C_READ) {
|
|
while (sc->sc_resid > 0 && (status & BCM_BSC_STATUS_RXD)) {
|
|
*sc->sc_data++ = BCM_BSC_READ(sc, BCM_BSC_DATA);
|
|
sc->sc_resid--;
|
|
status = BCM_BSC_READ(sc, BCM_BSC_STATUS);
|
|
}
|
|
} else {
|
|
while (sc->sc_resid > 0 && (status & BCM_BSC_STATUS_TXD)) {
|
|
BCM_BSC_WRITE(sc, BCM_BSC_DATA, *sc->sc_data++);
|
|
sc->sc_resid--;
|
|
status = BCM_BSC_READ(sc, BCM_BSC_STATUS);
|
|
}
|
|
}
|
|
|
|
if (status & BCM_BSC_STATUS_DONE) {
|
|
/* Disable interrupts. */
|
|
bcm_bsc_reset(sc);
|
|
wakeup(sc->sc_dev);
|
|
}
|
|
|
|
BCM_BSC_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
bcm_bsc_transfer(device_t dev, struct iic_msg *msgs, uint32_t nmsgs)
|
|
{
|
|
struct bcm_bsc_softc *sc;
|
|
uint32_t intr, read, status;
|
|
int i, err;
|
|
|
|
sc = device_get_softc(dev);
|
|
BCM_BSC_LOCK(sc);
|
|
|
|
/* If the controller is busy wait until it is available. */
|
|
while (sc->sc_flags & BCM_I2C_BUSY)
|
|
mtx_sleep(dev, &sc->sc_mtx, 0, "bscbusw", 0);
|
|
|
|
/* Now we have control over the BSC controller. */
|
|
sc->sc_flags = BCM_I2C_BUSY;
|
|
|
|
/* Clear the FIFO and the pending interrupts. */
|
|
bcm_bsc_reset(sc);
|
|
|
|
err = 0;
|
|
for (i = 0; i < nmsgs; i++) {
|
|
|
|
/* Write the slave address. */
|
|
BCM_BSC_WRITE(sc, BCM_BSC_SLAVE, msgs[i].slave >> 1);
|
|
|
|
/* Write the data length. */
|
|
BCM_BSC_WRITE(sc, BCM_BSC_DLEN, msgs[i].len);
|
|
|
|
sc->sc_data = msgs[i].buf;
|
|
sc->sc_resid = msgs[i].len;
|
|
if ((msgs[i].flags & IIC_M_RD) == 0) {
|
|
/* Fill up the TX FIFO. */
|
|
status = BCM_BSC_READ(sc, BCM_BSC_STATUS);
|
|
while (sc->sc_resid > 0 &&
|
|
(status & BCM_BSC_STATUS_TXD)) {
|
|
BCM_BSC_WRITE(sc, BCM_BSC_DATA, *sc->sc_data);
|
|
sc->sc_data++;
|
|
sc->sc_resid--;
|
|
status = BCM_BSC_READ(sc, BCM_BSC_STATUS);
|
|
}
|
|
read = 0;
|
|
intr = BCM_BSC_CTRL_INTT;
|
|
sc->sc_flags &= ~BCM_I2C_READ;
|
|
} else {
|
|
sc->sc_flags |= BCM_I2C_READ;
|
|
read = BCM_BSC_CTRL_READ;
|
|
intr = BCM_BSC_CTRL_INTR;
|
|
}
|
|
intr |= BCM_BSC_CTRL_INTD;
|
|
|
|
/* Start the transfer. */
|
|
BCM_BSC_WRITE(sc, BCM_BSC_CTRL, BCM_BSC_CTRL_I2CEN |
|
|
BCM_BSC_CTRL_ST | read | intr);
|
|
|
|
/* Wait for the transaction to complete. */
|
|
err = mtx_sleep(dev, &sc->sc_mtx, 0, "bsciow", hz);
|
|
|
|
/* Check for errors. */
|
|
if (err == 0 && (sc->sc_flags & BCM_I2C_ERROR))
|
|
err = EIO;
|
|
if (err != 0)
|
|
break;
|
|
}
|
|
|
|
/* Clean the controller flags. */
|
|
sc->sc_flags = 0;
|
|
|
|
/* Wake up the threads waiting for bus. */
|
|
wakeup(dev);
|
|
|
|
BCM_BSC_UNLOCK(sc);
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
bcm_bsc_iicbus_reset(device_t dev, u_char speed, u_char addr, u_char *oldaddr)
|
|
{
|
|
struct bcm_bsc_softc *sc;
|
|
uint32_t freq;
|
|
|
|
sc = device_get_softc(dev);
|
|
BCM_BSC_LOCK(sc);
|
|
bcm_bsc_reset(sc);
|
|
freq = 0;
|
|
switch (speed) {
|
|
case IIC_SLOW:
|
|
freq = BCM_BSC_SLOW;
|
|
break;
|
|
case IIC_FAST:
|
|
freq = BCM_BSC_FAST;
|
|
break;
|
|
case IIC_FASTEST:
|
|
freq = BCM_BSC_FASTEST;
|
|
break;
|
|
case IIC_UNKNOWN:
|
|
default:
|
|
/* Reuse last frequency. */
|
|
break;
|
|
}
|
|
if (freq != 0)
|
|
BCM_BSC_WRITE(sc, BCM_BSC_CLOCK, BCM_BSC_CORE_CLK / freq);
|
|
BCM_BSC_UNLOCK(sc);
|
|
|
|
return (IIC_ENOADDR);
|
|
}
|
|
|
|
static phandle_t
|
|
bcm_bsc_get_node(device_t bus, device_t dev)
|
|
{
|
|
|
|
/* We only have one child, the I2C bus, which needs our own node. */
|
|
return (ofw_bus_get_node(bus));
|
|
}
|
|
|
|
static device_method_t bcm_bsc_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, bcm_bsc_probe),
|
|
DEVMETHOD(device_attach, bcm_bsc_attach),
|
|
DEVMETHOD(device_detach, bcm_bsc_detach),
|
|
|
|
/* iicbus interface */
|
|
DEVMETHOD(iicbus_reset, bcm_bsc_iicbus_reset),
|
|
DEVMETHOD(iicbus_callback, iicbus_null_callback),
|
|
DEVMETHOD(iicbus_transfer, bcm_bsc_transfer),
|
|
|
|
/* ofw_bus interface */
|
|
DEVMETHOD(ofw_bus_get_node, bcm_bsc_get_node),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static devclass_t bcm_bsc_devclass;
|
|
|
|
static driver_t bcm_bsc_driver = {
|
|
"iichb",
|
|
bcm_bsc_methods,
|
|
sizeof(struct bcm_bsc_softc),
|
|
};
|
|
|
|
DRIVER_MODULE(iicbus, bcm2835_bsc, iicbus_driver, iicbus_devclass, 0, 0);
|
|
DRIVER_MODULE(bcm2835_bsc, simplebus, bcm_bsc_driver, bcm_bsc_devclass, 0, 0);
|