freebsd-skq/sys/arm/broadcom/bcm2835/bcm2835_bscvar.h
loos 8b84661d1f Add an iicbus_reset() method to bcm2835_bsc. While it is generally not
used for kernel devices it is used by i2c(8).

This fix the 'error: Device not configured' when i2c(8) tries to reset the
controller, as an example:

# i2c -r
Resetting I2C controller on /dev/iic0: error: Device not configured

For now use conservative settings for default i2c speeds.

MFC after:	1 week
2014-10-24 22:06:21 +00:00

74 lines
2.5 KiB
C

/*-
* Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
* Copyright (c) 2013 Luiz Otavio O Souza <loos@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _BCM2835_BSCVAR_H
#define _BCM2835_BSCVAR_H
struct {
uint32_t sda;
uint32_t scl;
unsigned long start;
} bcm_bsc_pins[] = {
{ 0, 1, 0x20205000 }, /* BSC0 GPIO pins and base address. */
{ 2, 3, 0x20804000 } /* BSC1 GPIO pins and base address. */
};
struct bcm_bsc_softc {
device_t sc_dev;
struct mtx sc_mtx;
struct resource * sc_mem_res;
struct resource * sc_irq_res;
bus_space_tag_t sc_bst;
bus_space_handle_t sc_bsh;
uint16_t sc_resid;
uint8_t *sc_data;
uint8_t sc_flags;
void * sc_intrhand;
};
#define BCM_I2C_BUSY 0x01
#define BCM_I2C_READ 0x02
#define BCM_I2C_ERROR 0x04
#define BCM_BSC_SLOW 10000 /* 10 kHz. */
#define BCM_BSC_FAST 50000 /* 50 kHz. */
#define BCM_BSC_FASTEST 100000 /* 100 kHz. */
#define BCM_BSC_WRITE(_sc, _off, _val) \
bus_space_write_4(_sc->sc_bst, _sc->sc_bsh, _off, _val)
#define BCM_BSC_READ(_sc, _off) \
bus_space_read_4(_sc->sc_bst, _sc->sc_bsh, _off)
#define BCM_BSC_LOCK(_sc) \
mtx_lock(&(_sc)->sc_mtx)
#define BCM_BSC_UNLOCK(_sc) \
mtx_unlock(&(_sc)->sc_mtx)
#endif /* _BCM2835_BSCVAR_H_ */