freebsd-skq/sys/x86/xen/pvcpu_enum.c
royger ba7194c81a xen: notify ACPI about SCI override
If the SCI is remapped to a non-ISA global interrupt notify the ACPI
subsystem about the override.

Reported by: David P. Discher <dpd@dpdtech.com>
Sponsored by: Citrix Systems R&D
2014-12-09 11:12:24 +00:00

237 lines
5.9 KiB
C

/*-
* Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
* Copyright (c) 2013 Roger Pau Monné <roger.pau@citrix.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/smp.h>
#include <sys/pcpu.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/intr_machdep.h>
#include <x86/apicvar.h>
#include <machine/cpu.h>
#include <machine/smp.h>
#include <xen/xen-os.h>
#include <xen/xen_intr.h>
#include <xen/hypervisor.h>
#include <xen/interface/vcpu.h>
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/actables.h>
#include <dev/acpica/acpivar.h>
static int xenpv_probe(void);
static int xenpv_probe_cpus(void);
static int xenpv_setup_local(void);
static int xenpv_setup_io(void);
static ACPI_TABLE_MADT *madt;
static vm_paddr_t madt_physaddr;
static vm_offset_t madt_length;
static struct apic_enumerator xenpv_enumerator = {
"Xen PV",
xenpv_probe,
xenpv_probe_cpus,
xenpv_setup_local,
xenpv_setup_io
};
/*--------------------- Helper functions to parse MADT -----------------------*/
/*
* Parse an interrupt source override for an ISA interrupt.
*/
static void
madt_parse_interrupt_override(ACPI_MADT_INTERRUPT_OVERRIDE *intr)
{
enum intr_trigger trig;
enum intr_polarity pol;
if (acpi_quirks & ACPI_Q_MADT_IRQ0 && intr->SourceIrq == 0 &&
intr->GlobalIrq == 2) {
if (bootverbose)
printf("MADT: Skipping timer override\n");
return;
}
madt_parse_interrupt_values(intr, &trig, &pol);
/* Remap the IRQ if it is mapped to a different interrupt vector. */
if (intr->SourceIrq != intr->GlobalIrq && intr->GlobalIrq > 15 &&
intr->SourceIrq == AcpiGbl_FADT.SciInterrupt)
/*
* If the SCI is remapped to a non-ISA global interrupt,
* then override the vector we use to setup.
*/
acpi_OverrideInterruptLevel(intr->GlobalIrq);
/* Register the IRQ with the polarity and trigger mode found. */
xen_register_pirq(intr->GlobalIrq, trig, pol);
}
/*
* Call the handler routine for each entry in the MADT table.
*/
static void
madt_walk_table(acpi_subtable_handler *handler, void *arg)
{
acpi_walk_subtables(madt + 1, (char *)madt + madt->Header.Length,
handler, arg);
}
/*
* Parse interrupt entries.
*/
static void
madt_parse_ints(ACPI_SUBTABLE_HEADER *entry, void *arg __unused)
{
if (entry->Type == ACPI_MADT_TYPE_INTERRUPT_OVERRIDE)
madt_parse_interrupt_override(
(ACPI_MADT_INTERRUPT_OVERRIDE *)entry);
}
/*---------------------------- Xen PV enumerator -----------------------------*/
/*
* This enumerator will only be registered on PVH
*/
static int
xenpv_probe(void)
{
return (0);
}
/*
* Test each possible vCPU in order to find the number of vCPUs
*/
static int
xenpv_probe_cpus(void)
{
#ifdef SMP
int i, ret;
for (i = 0; i < MAXCPU; i++) {
ret = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
if (ret >= 0)
lapic_create((i * 2), (i == 0));
}
#endif
return (0);
}
/*
* Initialize the vCPU id of the BSP
*/
static int
xenpv_setup_local(void)
{
PCPU_SET(vcpu_id, 0);
lapic_init(0);
return (0);
}
/*
* On PVH guests there's no IO APIC
*/
static int
xenpv_setup_io(void)
{
if (xen_initial_domain()) {
int i;
/* Map MADT */
madt_physaddr = acpi_find_table(ACPI_SIG_MADT);
madt = acpi_map_table(madt_physaddr, ACPI_SIG_MADT);
madt_length = madt->Header.Length;
/* Try to initialize ACPI so that we can access the FADT. */
i = acpi_Startup();
if (ACPI_FAILURE(i)) {
printf("MADT: ACPI Startup failed with %s\n",
AcpiFormatException(i));
printf("Try disabling either ACPI or apic support.\n");
panic("Using MADT but ACPI doesn't work");
}
/* Run through the table to see if there are any overrides. */
madt_walk_table(madt_parse_ints, NULL);
/*
* If there was not an explicit override entry for the SCI,
* force it to use level trigger and active-low polarity.
*/
if (!madt_found_sci_override) {
printf(
"MADT: Forcing active-low polarity and level trigger for SCI\n");
xen_register_pirq(AcpiGbl_FADT.SciInterrupt,
INTR_TRIGGER_LEVEL, INTR_POLARITY_LOW);
}
acpi_SetDefaultIntrModel(ACPI_INTR_APIC);
}
return (0);
}
static void
xenpv_register(void *dummy __unused)
{
if (xen_pv_domain()) {
apic_register_enumerator(&xenpv_enumerator);
}
}
SYSINIT(xenpv_register, SI_SUB_TUNABLES - 1, SI_ORDER_FIRST, xenpv_register, NULL);
/*
* Setup per-CPU vCPU IDs
*/
static void
xenpv_set_ids(void *dummy)
{
struct pcpu *pc;
int i;
CPU_FOREACH(i) {
pc = pcpu_find(i);
pc->pc_vcpu_id = i;
}
}
SYSINIT(xenpv_set_ids, SI_SUB_CPU, SI_ORDER_MIDDLE, xenpv_set_ids, NULL);