freebsd-skq/sys/dev/usb/umass.c
Kenneth D. Merry 169b302922 Take out calls to cam_sim_set_basexfer_speed(), the base transfer speed is
now returned in the path inquiry CCB.

Submitted by:	Nick Hibma <hibma@skylink.it>
1999-05-06 21:12:58 +00:00

842 lines
23 KiB
C

/*-
* Copyright (c) 1999 MAEKAWA Masahide <bishop@rr.iij4u.or.jp>,
* Nick Hibma <hibma@skylink.it>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Universal Serial Bus Mass Storage Class Bulk-Only Transport
* http://www.usb.org/developers/usbmassbulk_09.pdf
*
* Relevant parts have been quoted in the source.
*/
/* To do:
* x The umass_usb_transfer routine uses synchroneous transfers. This
* should be changed to async and state handling.
*/
/* Authors: (with short acronyms for comments)
* NWH - Nick Hibma <hibma@skylink.it>
*/
#include "opt_usb.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/ioccom.h>
#include <sys/conf.h>
#include <machine/clock.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usbdi_util.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#ifdef UMASS_DEBUG
#define DPRINTF(m, x) if (umassdebug & (m)) logprintf x
#define UDMASS_CAM 0x00010000
#define UDMASS_SCSI 0x00020000
#define UDMASS_USB 0x00040000
#define UDMASS_BULK 0x00080000
#define UDMASS_ALL 0xffff0000
int umassdebug = UDMASS_CAM|UDMASS_BULK|UDMASS_USB;
#else
#define DPRINTF(m, x)
#endif
typedef struct umass_softc {
bdevice sc_dev; /* base device */
usbd_interface_handle sc_iface; /* the interface we use */
u_int8_t sc_bulkout; /* bulk-out Endpoint Address */
usbd_pipe_handle sc_bulkout_pipe;
u_int8_t sc_bulkin; /* bulk-in Endpoint Address */
usbd_pipe_handle sc_bulkin_pipe;
struct cam_sim *sim; /* SCSI Interface Module */
struct cam_path *path; /* XPT path */
/* we count the number of soft retries that failed. If 5 have failed,
* the device does not support them for example, we revert to hard
* resets.
*/
int soft_tries; /* retries to do soft reset */
# define MAX_SOFT_TRIES 5
} umass_softc_t;
#define USBD_COMMAND_FAILED USBD_INVAL /* redefine some errors for */
#define UPROTO_MASS_ZIP 80
#define UMASS_SCSIID_HOST 0x00
#define UMASS_SCSIID_DEVICE 0x01
#define DIR_OUT 0
#define DIR_IN 1
#define DIR_NONE 2
/* Bulk-Only specific request */
#define UR_RESET 0xff
#define URESET_HARD 0x00
#define URESET_SOFT 0x01
/* Bulk-Only Mass Storage features */
/* Command Block Wrapper */
typedef struct {
uDWord dCBWSignature;
#define CBWSIGNATURE 0x43425355
uDWord dCBWTag;
uDWord dCBWDataTransferLength;
uByte bCBWFlags;
#define CBWFLAGS_OUT 0x00
#define CBWFLAGS_IN 0x80
uByte bCBWLUN;
uByte bCDBLength;
uByte CBWCDB[16];
} usb_bulk_cbw_t;
#define USB_BULK_CBW_SIZE 31
/* Command Status Wrapper */
typedef struct {
uDWord dCSWSignature;
#define CSWSIGNATURE 0x53425355
uDWord dCSWTag;
uDWord dCSWDataResidue;
uByte bCSWStatus;
#define CSWSTATUS_GOOD 0x0
#define CSWSTATUS_FAILED 0x1
#define CSWSTATUS_PHASE 0x2
} usb_bulk_csw_t;
#define USB_BULK_CSW_SIZE 13
USB_DECLARE_DRIVER(umass);
/* USB related functions */
usbd_status umass_usb_transfer __P((usbd_interface_handle iface,
usbd_pipe_handle pipe,
void *buf, int buflen,
int flags, int *xfer_size));
/* Bulk-Only related functions */
usbd_status umass_bulk_reset __P((umass_softc_t *sc, int flag));
usbd_status umass_bulk_transfer __P((umass_softc_t *sc, int lun,
void *cmd, int cmdlen,
void *data, int datalen,
int dir, int *residue));
/* CAM related functions */
static void umass_cam_action __P((struct cam_sim *sim, union ccb *ccb));
static void umass_cam_poll __P((struct cam_sim *sim));
static int umass_cam_attach __P((umass_softc_t *sc));
static void umass_cam_detach __P((umass_softc_t *sc));
USB_MATCH(umass)
{
USB_MATCH_START(umass, uaa);
usb_interface_descriptor_t *id;
if (!uaa->iface)
return(UMATCH_NONE);
id = usbd_get_interface_descriptor(uaa->iface);
if (id
&& id->bInterfaceClass == UCLASS_MASS
&& id->bInterfaceSubClass == USUBCLASS_SCSI
&& id->bInterfaceProtocol == UPROTO_MASS_ZIP)
/* probe the Iomega USB Zip 100 drive */
return(UMATCH_VENDOR_IFACESUBCLASS_IFACEPROTO);
return(UMATCH_NONE);
}
USB_ATTACH(umass)
{
USB_ATTACH_START(umass, sc, uaa);
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
char devinfo[1024];
int i;
int err;
sc->sc_iface = uaa->iface;
sc->sc_bulkout_pipe = NULL;
sc->sc_bulkin_pipe = NULL;
sc->soft_tries = 0;
usbd_devinfo(uaa->device, 0, devinfo);
USB_ATTACH_SETUP;
id = usbd_get_interface_descriptor(sc->sc_iface);
printf("%s: %s, iclass %d/%d/%d\n", USBDEVNAME(sc->sc_dev), devinfo,
id->bInterfaceClass, id->bInterfaceSubClass,
id->bInterfaceProtocol);
/*
* A Bulk-Only Mass Storage device supports the following endpoints,
* in addition to the Endpoint 0 for Control transfer that is required
* of all USB devices:
* (a) bulk-in endpoint.
* (b) bulk-out endpoint.
*
* The endpoint addresses are not fixed, so we have to read them
* from the device descriptors of the current interface.
*/
for (i = 0 ; i < id->bNumEndpoints ; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (!ed) {
printf("%s: could not read endpoint descriptor\n",
USBDEVNAME(sc->sc_dev));
USB_ATTACH_ERROR_RETURN;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_IN
&& (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
sc->sc_bulkin = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_OUT
&& (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
sc->sc_bulkout = ed->bEndpointAddress;
}
}
/* Open the bulk-in and -out pipe */
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout,
USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe);
if (err) {
DPRINTF(UDMASS_USB, ("cannot open bulk out pipe (address %d)\n",
sc->sc_bulkout));
USB_ATTACH_ERROR_RETURN;
}
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin,
USBD_EXCLUSIVE_USE, &sc->sc_bulkin_pipe);
if (err) {
DPRINTF(UDMASS_USB, ("cannot open bulk in pipe (address %d)\n",
sc->sc_bulkin));
usbd_close_pipe(sc->sc_bulkout_pipe);
USB_ATTACH_ERROR_RETURN;
}
/* attach the device to the SCSI layer */
err = umass_cam_attach(sc);
if (err) {
usbd_close_pipe(sc->sc_bulkout_pipe);
usbd_close_pipe(sc->sc_bulkin_pipe);
USB_ATTACH_ERROR_RETURN;
}
USB_ATTACH_SUCCESS_RETURN;
}
#if defined(__FreeBSD__)
static int
umass_detach(device_t self)
{
umass_softc_t *sc = device_get_softc(self);
DPRINTF(UDMASS_USB, ("%s: detached\n", USBDEVNAME(sc->sc_dev)));
/* detach from the SCSI host controller (completely) */
umass_cam_detach(sc);
/* remove the bulk pipes) */
if (sc->sc_bulkout_pipe)
usbd_close_pipe(sc->sc_bulkout_pipe);
if (sc->sc_bulkin_pipe)
usbd_close_pipe(sc->sc_bulkin_pipe);
device_set_desc(sc->sc_dev, NULL);
return(0);
}
#endif
/* Performs a request over a pipe.
*
* flags: Can be set to USBD_SHORT_XFER_OK
* xfer_size: if not null returns the nr. of bytes transferred
*
* If the returned error is USBD_STALLED the pipe stall has
* been cleared again.
*/
usbd_status
umass_usb_transfer(usbd_interface_handle iface, usbd_pipe_handle pipe,
void *buf, int buflen, int flags, int *xfer_size)
{
usbd_request_handle reqh;
usbd_private_handle priv;
void *buffer;
int size;
usbd_status err;
/* A transfer is done synchronously. We create and schedule the
* transfer and then wait for it to complete
*/
reqh = usbd_alloc_request();
if (!reqh) {
DPRINTF(UDMASS_USB, ("Not enough memory\n"));
return USBD_NOMEM;
}
(void) usbd_setup_request(reqh, pipe, 0, buf, buflen,
flags, 3000 /*ms*/, NULL);
err = usbd_sync_transfer(reqh);
if (err) {
DPRINTF(UDMASS_USB, ("transfer failed, %s\n",
usbd_errstr(err)));
usbd_free_request(reqh);
return(err);
}
usbd_get_request_status(reqh, &priv, &buffer, &size, &err);
if (xfer_size)
*xfer_size = size;
usbd_free_request(reqh);
return(USBD_NORMAL_COMPLETION);
}
/*
* USB Mass Storage Bulk-Only specific request
*/
/*
* The Reset request shall be sent via the Control endpoint to the device.
*
* There are two types of Bulk-Only Mass Storage Resets; soft and hard.
* Implementation of the soft is optional. If the soft one fails, the hard one
* is immediately tried.
*
* Soft reset shall clear all buffers and reset the interface to the device
* without affecting the state of the device itself.
* Hard reset shall clear all buffers and reset the interface and the
* device without changing STALL or toggle conditions.
*/
usbd_status
umass_bulk_reset(umass_softc_t *sc, int flag)
{
usbd_device_handle dev;
usb_device_request_t req;
usbd_status err;
DPRINTF(UDMASS_BULK, ("%s: %s reset\n",
USBDEVNAME(sc->sc_dev),
(flag == URESET_SOFT? "Soft":"Hard")));
/* Avoid useless attempts at soft-resetting the drive
* XXX Could be done with a quirk entry somewhere as well.
*/
if (flag == URESET_SOFT && sc->soft_tries > MAX_SOFT_TRIES)
flag = URESET_HARD;
usbd_interface2device_handle(sc->sc_iface, &dev);
/* the reset command is a class specific interface request */
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UR_RESET;
USETW(req.wValue, flag); /* type of reset: hard/soft */
USETW(req.wIndex, sc->sc_iface->idesc->bInterfaceNumber);
USETW(req.wLength, 0); /* no data stage */
err = usbd_do_request(dev, &req, 0);
if (err) {
if (flag == URESET_SOFT) {
/* reset again, but now hard. Soft reset is optional in the
* Bulk-Only spec.
*/
sc->soft_tries++;
DPRINTF(UDMASS_USB, ("%s: Soft reset failed (%d), %s\n",
USBDEVNAME(sc->sc_dev),
sc->soft_tries, usbd_errstr(err)));
return(umass_bulk_reset(sc, URESET_HARD));
} else {
printf("%s: Hard reset failed, %s\n",
USBDEVNAME(sc->sc_dev), usbd_errstr(err));
/* XXX we should port_reset the device */
return(err);
}
}
/* we do not need to wait for the device to finish the reset.
* From the Bulk-Only spec (5.3.3):
* "For either Bulk-Only Mass Storage Reset, hard, or soft, the device
* shall NAK the status stage of Control request until the reset is
* complete."
*
* XXX (Iomega Zip 100) For some reason we get timeouts if we don't. :-(
* The 2.5sec. is a guessed value.
*/
DELAY(2500000 /*us*/);
return(USBD_NORMAL_COMPLETION);
}
/*
* Do a Bulk-Only transfer with cmdlen bytes from cmd, possibly
* a data phase of datalen bytes from/to data and finally a csw read
* phase.
*
* If the data direction was inbound a maximum of datalen bytes
* is stored in the buffer pointed to by data.
* The status returned is USBD_NORMAL_COMPLETION,
* USBD_IOERROR, USBD_COMMAND_FAILED.
* In the last case *residue is set to the residue from the CSW,
* otherwise to 0.
*
* For the functionality of this subroutine see the Mass Storage
* Spec., the graphs on page 14 and page 19 and beyong (v0.9 of
* the spec).
*/
usbd_status
umass_bulk_transfer(umass_softc_t *sc, int lun, void *cmd, int cmdlen,
void *data, int datalen, int dir, int *residue)
{
static int dCBWtag = 42; /* tag to be used in transfers,
* incremented at each transfer */
usb_bulk_cbw_t cbw; /* command block wrapper struct */
usb_bulk_csw_t csw; /* command status wrapper struct */
u_int32_t n = 0; /* number of bytes transported */
usbd_status err;
#ifdef UMASS_DEBUG
u_int8_t *c = cmd;
/* check the given arguments */
if (!data && datalen > 0) { /* no buffer for transfer */
DPRINTF(UDMASS_BULK, ("%s: no buffer, but datalen > 0 !\n",
USBDEVNAME(sc->sc_dev)));
return USBD_IOERROR;
}
DPRINTF(UDMASS_BULK, ("%s: cmd: %d bytes (0x%02x%02x%02x%02x%02x%02x%s)"
", data: %d bytes, dir: %s\n",
USBDEVNAME(sc->sc_dev),
cmdlen, c[0], c[1], c[2], c[3], c[4], c[5],
(cmdlen > 6? "...":""),
datalen, (dir == DIR_IN? "in":"out")));
#endif
if (dir == DIR_NONE || datalen == 0) { /* make sure they correspond */
datalen = 0;
dir = DIR_NONE;
}
*residue = 0; /* reset residue */
/*
* Determine the direction of transferring data and data length.
*
* dCBWDataTransferLength (datalen) :
* This field indicates the number of bytes of data that the host
* intends to transfer on the IN or OUT Bulk endpoint(as indicated by
* the Direction bit) during the execution of this command. If this
* field is set to 0, the device will expect that no data will be
* transferred IN or OUT during this command, regardless of the value
* of the Direction bit defined in dCBWFlags.
*
* dCBWFlags (dir) :
* The bits of the Flags field are defined as follows:
* Bits 0-6 reserved
* Bit 7 Direction - this bit shall be ignored if the
* dCBWDataTransferLength field is zero.
* 0 = data Out from host to device
* 1 = data In from device to host
*/
/*
* Command transport phase
*/
/* Fill in the Command Block Wrapper */
USETDW(cbw.dCBWSignature, CBWSIGNATURE);
USETDW(cbw.dCBWTag, dCBWtag++);
USETDW(cbw.dCBWDataTransferLength, datalen);
/* we do not check for DIR_NONE below (see text on dCBWFlags above) */
cbw.bCBWFlags = (dir == DIR_IN? CBWFLAGS_IN:CBWFLAGS_OUT);
cbw.bCBWLUN = lun;
cbw.bCDBLength = cmdlen;
bcopy(cmd, cbw.CBWCDB, cmdlen);
/* Send the CBW from host to device via bulk-out endpoint. */
err = umass_usb_transfer(sc->sc_iface, sc->sc_bulkout_pipe,
&cbw, USB_BULK_CBW_SIZE, 0, NULL);
if (err) {
DPRINTF(UDMASS_BULK, ("%s: failed to send CBW\n",
USBDEVNAME(sc->sc_dev)));
/* If the device detects that the CBW is invalid, then the
* device shall STALL both bulk endpoints and require a
* Bulk-Only MS Reset (hard)
*/
umass_bulk_reset(sc, URESET_HARD);
usbd_clear_endpoint_stall(sc->sc_bulkout_pipe);
return(USBD_IOERROR);
}
/*
* Data transport phase (only if there is data to be sent/received)
*/
if (dir == DIR_IN) {
/* we allow short transfers for bulk-in pipes */
err = umass_usb_transfer(sc->sc_iface, sc->sc_bulkin_pipe,
data, datalen,
USBD_SHORT_XFER_OK, &n);
if (err)
DPRINTF(UDMASS_BULK, ("%s: failed to receive data, "
"(%d bytes, n = %d), %d(%s)\n",
USBDEVNAME(sc->sc_dev),
datalen, n, err, usbd_errstr(err)));
} else if (dir == DIR_OUT) {
err = umass_usb_transfer(sc->sc_iface,
sc->sc_bulkout_pipe,
data, datalen, 0, &n);
if (err)
DPRINTF(UDMASS_BULK, ("%s: failed to send data, "
"(%d bytes, n = %d), %d(%s)\n",
USBDEVNAME(sc->sc_dev),
datalen, n, err, usbd_errstr(err)));
}
if (err && err != USBD_STALLED)
return(USBD_IOERROR);
/*
* Status transport phase
*/
/* Read the Command Status Wrapper via bulk-in endpoint. */
err = umass_usb_transfer(sc->sc_iface, sc->sc_bulkin_pipe,
&csw, USB_BULK_CSW_SIZE, 0, NULL);
/* Try again if the bulk-in pipe was stalled */
if (err == USBD_STALLED) {
err = usbd_clear_endpoint_stall(sc->sc_bulkin_pipe);
if (!err) {
err = umass_usb_transfer(sc->sc_iface, sc->sc_bulkin_pipe,
&csw, USB_BULK_CSW_SIZE, 0, NULL);
}
}
if (err && err != USBD_STALLED)
return(USBD_IOERROR);
/*
* Check the CSW for status and validity, and check for fatal errors
*/
/* Invalid CSW: Wrong signature or wrong tag might indicate
* that the device is confused -> reset it hard, to remove
* all its state.
* Other fatal errors: STALL on read of CSW and Phase error
* or unknown status.
*/
if (err == USBD_STALLED
|| UGETDW(csw.dCSWSignature) != CSWSIGNATURE
|| UGETDW(csw.dCSWTag) != UGETDW(cbw.dCBWTag)
|| csw.bCSWStatus == CSWSTATUS_PHASE
|| csw.bCSWStatus > CSWSTATUS_PHASE) {
if (err) {
printf("%s: failed to read CSW, %s\n",
USBDEVNAME(sc->sc_dev), usbd_errstr(err));
} else if (csw.bCSWStatus == CSWSTATUS_PHASE) {
printf("%s: Phase Error, residue = %d, n = %d\n",
USBDEVNAME(sc->sc_dev),
UGETDW(csw.dCSWDataResidue), n);
} else if (csw.bCSWStatus > CSWSTATUS_PHASE) {
printf("%s: Unknown status %d in CSW\n",
USBDEVNAME(sc->sc_dev), csw.bCSWStatus);
} else {
printf("%s: invalid CSW, sig = 0x%08x, tag = %d (!= %d)\n",
USBDEVNAME(sc->sc_dev),
UGETDW(csw.dCSWSignature),
UGETDW(csw.dCSWTag), UGETDW(cbw.dCBWTag));
}
umass_bulk_reset(sc, URESET_HARD);
usbd_clear_endpoint_stall(sc->sc_bulkout_pipe);
usbd_clear_endpoint_stall(sc->sc_bulkin_pipe);
return(USBD_IOERROR);
}
if (csw.bCSWStatus == CSWSTATUS_FAILED) {
DPRINTF(UDMASS_BULK, ("%s: Command Failed, "
"residue = %d, n = %d\n",
USBDEVNAME(sc->sc_dev),
UGETDW(csw.dCSWDataResidue), n));
umass_bulk_reset(sc, URESET_SOFT);
*residue = UGETDW(csw.dCSWDataResidue);
return(USBD_COMMAND_FAILED);
}
return(USBD_NORMAL_COMPLETION);
}
/*
* CAM specific functions
*/
static int
umass_cam_attach(umass_softc_t *sc)
{
struct cam_devq *devq;
/* A HBA is attached to the CAM layer.
*
* The CAM layer will then after a while start probing for
* devices on the bus. The number of devices is limitted to one.
*/
/* SCSI transparent command set */
devq = cam_simq_alloc(1); /* Maximum Openings */
if (devq == NULL)
return(ENOMEM);
sc->sim = cam_sim_alloc(umass_cam_action, umass_cam_poll, "umass", sc,
device_get_unit(sc->sc_dev), 1, 0, devq);
if (sc->sim == NULL) {
cam_simq_free(devq);
return(ENOMEM);
}
if(xpt_bus_register(sc->sim, 0) != CAM_SUCCESS) {
cam_sim_free(sc->sim, 1);
return(ENOMEM);
}
if (xpt_create_path(&sc->path, NULL, cam_sim_path(sc->sim),
CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(sc->sim));
cam_sim_free(sc->sim, 1);
return(ENOMEM);
}
return(0);
}
/* umass_cam_detach
*/
static void
umass_cam_detach(umass_softc_t *sc)
{
/* Detach from CAM layer
* XXX do we need to delete the device first?
*/
xpt_free_path(sc->path);
xpt_bus_deregister(cam_sim_path(sc->sim));
cam_sim_free(sc->sim, /*free_devq*/TRUE);
}
/* umass_cam_action
* CAM requests for action come through here
*/
static void
umass_cam_action(struct cam_sim *sim, union ccb *ccb)
{
umass_softc_t *sc = (umass_softc_t *) sim->softc;
usbd_status err;
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO:
{
struct ccb_scsiio *csio = &ccb->csio; /* deref union */
int dir;
int residue;
DPRINTF(UDMASS_CAM, ("%s: XPT_SCSI_IO %d:%d:%d\n",
USBDEVNAME(sc->sc_dev),
ccb->ccb_h.path_id, ccb->ccb_h.target_id,
ccb->ccb_h.target_lun));
#ifdef UMASS_DEBUG
if (ccb->ccb_h.target_id != UMASS_SCSIID_DEVICE
|| ccb->ccb_h.target_lun != 0) {
DPRINTF(UDMASS_CAM, ("%s: Wrong SCSI ID %d or LUN %d",
USBDEVNAME(sc->sc_dev),
ccb->ccb_h.target_id, ccb->ccb_h.target_lun));
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
xpt_done(ccb);
return;
}
#endif
if (ccb->ccb_h.flags == CAM_DIR_NONE)
dir = DIR_NONE;
else if (ccb->ccb_h.flags & CAM_DIR_IN)
dir = DIR_IN;
else
dir = DIR_OUT;
err = umass_bulk_transfer(sc, ccb->ccb_h.target_lun,
csio->cdb_io.cdb_bytes, csio->cdb_len,
(void *)csio->data_ptr, csio->dxfer_len,
dir, &residue);
/* FAILED commands are supposed to be SCSI failed commands
* and are therefore considered to be successfull CDW/CSW
* transfers. PHASE errors are more serious and should return
* an error to the CAM system.
*
* XXX This is however more based on empirical evidence than on
* hard proof from the Bulk-Only spec.
*/
if (!err) {
ccb->ccb_h.status = CAM_REQ_CMP;
} else if (err == USBD_COMMAND_FAILED) {
csio->resid = residue;
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
} else if (err) {
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
}
xpt_done(ccb);
break;
}
case XPT_PATH_INQ:
{
struct ccb_pathinq *cpi = &ccb->cpi;
DPRINTF(UDMASS_CAM, ("%s: XPT_PATH_INQ\n",
USBDEVNAME(sc->sc_dev)));
/* information copied from vpo driver. Needs to be checked */
cpi->version_num = 1;
cpi->hba_inquiry = 0;
cpi->target_sprt = 0;
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
cpi->max_target = 1; /* one target: the drive */
cpi->max_lun = 0; /* no LUN's */
cpi->initiator_id = UMASS_SCSIID_HOST;
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 700;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Iomega", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS:
case XPT_RESET_DEV:
{
DPRINTF(UDMASS_CAM, ("%s: XPT_RESET_{BUS,DEV}\n",
USBDEVNAME(sc->sc_dev)));
err = umass_bulk_reset(sc, URESET_HARD);
if (err)
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
else
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_GET_TRAN_SETTINGS:
{
DPRINTF(UDMASS_CAM, ("%s: XPT_GET_TRAN_SETTINGS (XXX)\n",
USBDEVNAME(sc->sc_dev)));
/* XXX not implemented */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
case XPT_SET_TRAN_SETTINGS:
{
DPRINTF(UDMASS_CAM, ("%s: XPT_SET_TRAN_SETTINGS (XXX)\n",
USBDEVNAME(sc->sc_dev)));
/* XXX not implemented */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg = &ccb->ccg;
DPRINTF(UDMASS_CAM, ("%s: XPT_CALC_GEOMETRY volume size %d\n",
USBDEVNAME(sc->sc_dev), ccg->volume_size));
/* fill in the missing fields in the struct */
ccg->heads = 64;
ccg->secs_per_track = 32;
ccg->cylinders = ccg->volume_size / ccg->heads
/ ccg->secs_per_track;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
DPRINTF(UDMASS_CAM, ("%s: CAM function 0x%x not implemented\n",
USBDEVNAME(sc->sc_dev), ccb->ccb_h.func_code));
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
/* umass_cam_poll
* all requests are handled through umass_cam_action, requests
* are never pending. So, nothing to do here.
*/
static void
umass_cam_poll(struct cam_sim *sim)
{
/* nop */
}
DRIVER_MODULE(umass, uhub, umass_driver, umass_devclass, usbd_driver_load, 0);