18625a197e
tree for two or more years now), except in a few places where there's code to be compatible with older versions of FreeBSD.
1563 lines
40 KiB
C
1563 lines
40 KiB
C
/*-
|
||
* Copyright (c) 1994-1997 Matt Thomas (matt@3am-software.com)
|
||
* Copyright (c) LAN Media Corporation 1998, 1999.
|
||
* Copyright (c) 2000 Stephen Kiernan (sk-ports@vegamuse.org)
|
||
* All rights reserved.
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. The name of the author may not be used to endorse or promote products
|
||
* derived from this software without specific prior written permission
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
* $FreeBSD$
|
||
* From NetBSD: if_de.c,v 1.56.2.1 1997/10/27 02:13:25 thorpej Exp
|
||
* $Id: if_lmc.c,v 1.9 1999/02/19 15:08:42 explorer Exp $
|
||
*/
|
||
|
||
#ifdef COMPILING_LINT
|
||
#warning "The lmc driver is broken and is not compiled with LINT"
|
||
#else
|
||
|
||
char lmc_version[] = "BSD 1.1";
|
||
|
||
#include "opt_netgraph.h"
|
||
#include <sys/param.h>
|
||
#include <sys/systm.h>
|
||
#include <sys/mbuf.h>
|
||
#include <sys/socket.h>
|
||
#include <sys/errno.h>
|
||
#include <sys/malloc.h>
|
||
#include <sys/kernel.h>
|
||
|
||
#include <net/if.h>
|
||
#include <sys/syslog.h>
|
||
|
||
#include <vm/vm.h>
|
||
|
||
#include <netgraph/ng_message.h>
|
||
#include <netgraph/ng_parse.h>
|
||
#include <netgraph/netgraph.h>
|
||
|
||
#include <vm/pmap.h>
|
||
#include <dev/pci/pcivar.h>
|
||
#include <pci/dc21040reg.h>
|
||
#define INCLUDE_PATH_PREFIX "dev/lmc/"
|
||
|
||
/* Intel CPUs should use I/O mapped access. */
|
||
#if defined(__i386__)
|
||
#define LMC_IOMAPPED
|
||
#endif
|
||
|
||
/*
|
||
* This turns on all sort of debugging stuff and make the
|
||
* driver much larger.
|
||
*/
|
||
#ifdef LMC_DEBUG
|
||
#define DP(x) printf x
|
||
#else
|
||
#define DP(x)
|
||
#endif
|
||
|
||
#define LMC_HZ 10
|
||
|
||
#ifndef TULIP_GP_PINSET
|
||
#define TULIP_GP_PINSET 0x00000100L
|
||
#endif
|
||
#ifndef TULIP_BUSMODE_READMULTIPLE
|
||
#define TULIP_BUSMODE_READMULTIPLE 0x00200000L
|
||
#endif
|
||
|
||
/*
|
||
* C sucks
|
||
*/
|
||
typedef struct lmc___softc lmc_softc_t;
|
||
typedef struct lmc___media lmc_media_t;
|
||
typedef struct lmc___ctl lmc_ctl_t;
|
||
|
||
#include "dev/lmc/if_lmcioctl.h"
|
||
#include "dev/lmc/if_lmcvar.h"
|
||
#include "dev/lmc/if_lmc_common.c"
|
||
#include "dev/lmc/if_lmc_media.c"
|
||
|
||
/*
|
||
* This module supports
|
||
* the DEC 21140A pass 2.2 PCI Fast Ethernet Controller.
|
||
*/
|
||
static lmc_intrfunc_t lmc_intr_normal(void *);
|
||
static ifnet_ret_t lmc_ifstart(lmc_softc_t * const sc );
|
||
static ifnet_ret_t lmc_ifstart_one(lmc_softc_t * const sc);
|
||
static struct mbuf *lmc_txput(lmc_softc_t * const sc, struct mbuf *m);
|
||
static void lmc_rx_intr(lmc_softc_t * const sc);
|
||
|
||
static void lmc_watchdog(lmc_softc_t * const sc);
|
||
static void lmc_ifup(lmc_softc_t * const sc);
|
||
static void lmc_ifdown(lmc_softc_t * const sc);
|
||
|
||
#ifdef LMC_DEBUG
|
||
static void ng_lmc_dump_packet(struct mbuf *m);
|
||
#endif /* LMC_DEBUG */
|
||
static void ng_lmc_watchdog_frame(void *arg);
|
||
static void ng_lmc_init(void *ignored);
|
||
|
||
static ng_constructor_t ng_lmc_constructor;
|
||
static ng_rcvmsg_t ng_lmc_rcvmsg;
|
||
static ng_shutdown_t ng_lmc_rmnode;
|
||
static ng_newhook_t ng_lmc_newhook;
|
||
/*static ng_findhook_t ng_lmc_findhook; */
|
||
static ng_connect_t ng_lmc_connect;
|
||
static ng_rcvdata_t ng_lmc_rcvdata;
|
||
static ng_disconnect_t ng_lmc_disconnect;
|
||
|
||
/* Parse type for struct lmc_ctl */
|
||
static const struct ng_parse_fixedarray_info ng_lmc_ctl_cardspec_info = {
|
||
&ng_parse_int32_type,
|
||
7,
|
||
NULL
|
||
};
|
||
|
||
static const struct ng_parse_type ng_lmc_ctl_cardspec_type = {
|
||
&ng_parse_fixedarray_type,
|
||
&ng_lmc_ctl_cardspec_info
|
||
};
|
||
|
||
static const struct ng_parse_struct_info ng_lmc_ctl_type_info = {
|
||
{
|
||
{ "cardtype", &ng_parse_int32_type },
|
||
{ "clock_source", &ng_parse_int32_type },
|
||
{ "clock_rate", &ng_parse_int32_type },
|
||
{ "crc_length", &ng_parse_int32_type },
|
||
{ "cable_length", &ng_parse_int32_type },
|
||
{ "scrambler_onoff", &ng_parse_int32_type },
|
||
{ "cable_type", &ng_parse_int32_type },
|
||
{ "keepalive_onoff", &ng_parse_int32_type },
|
||
{ "ticks", &ng_parse_int32_type },
|
||
{ "cardspec", &ng_lmc_ctl_cardspec_type },
|
||
{ "circuit_type", &ng_parse_int32_type },
|
||
{ NULL },
|
||
}
|
||
};
|
||
|
||
static const struct ng_parse_type ng_lmc_ctl_type = {
|
||
&ng_parse_struct_type,
|
||
&ng_lmc_ctl_type_info
|
||
};
|
||
|
||
|
||
/* List of commands and how to convert arguments to/from ASCII */
|
||
static const struct ng_cmdlist ng_lmc_cmdlist[] = {
|
||
{
|
||
NG_LMC_COOKIE,
|
||
NGM_LMC_GET_CTL,
|
||
"getctl",
|
||
NULL,
|
||
&ng_lmc_ctl_type,
|
||
},
|
||
{
|
||
NG_LMC_COOKIE,
|
||
NGM_LMC_SET_CTL,
|
||
"setctl",
|
||
&ng_lmc_ctl_type,
|
||
NULL
|
||
},
|
||
{ 0 }
|
||
};
|
||
|
||
static struct ng_type typestruct = {
|
||
NG_ABI_VERSION,
|
||
NG_LMC_NODE_TYPE,
|
||
NULL,
|
||
ng_lmc_constructor,
|
||
ng_lmc_rcvmsg,
|
||
ng_lmc_rmnode,
|
||
ng_lmc_newhook,
|
||
NULL,
|
||
ng_lmc_connect,
|
||
ng_lmc_rcvdata,
|
||
ng_lmc_disconnect,
|
||
ng_lmc_cmdlist
|
||
};
|
||
|
||
static int ng_lmc_done_init = 0;
|
||
|
||
|
||
/*
|
||
* Code the read the SROM and MII bit streams (I2C)
|
||
*/
|
||
static void
|
||
lmc_delay_300ns(lmc_softc_t * const sc)
|
||
{
|
||
int idx;
|
||
for (idx = (300 / 33) + 1; idx > 0; idx--)
|
||
(void)LMC_CSR_READ(sc, csr_busmode);
|
||
}
|
||
|
||
|
||
#define EMIT \
|
||
do { \
|
||
LMC_CSR_WRITE(sc, csr_srom_mii, csr); \
|
||
lmc_delay_300ns(sc); \
|
||
} while (0)
|
||
|
||
static void
|
||
lmc_srom_idle(lmc_softc_t * const sc)
|
||
{
|
||
unsigned bit, csr;
|
||
|
||
csr = SROMSEL ; EMIT;
|
||
csr = SROMSEL | SROMRD; EMIT;
|
||
csr ^= SROMCS; EMIT;
|
||
csr ^= SROMCLKON; EMIT;
|
||
|
||
/*
|
||
* Write 25 cycles of 0 which will force the SROM to be idle.
|
||
*/
|
||
for (bit = 3 + SROM_BITWIDTH + 16; bit > 0; bit--) {
|
||
csr ^= SROMCLKOFF; EMIT; /* clock low; data not valid */
|
||
csr ^= SROMCLKON; EMIT; /* clock high; data valid */
|
||
}
|
||
csr ^= SROMCLKOFF; EMIT;
|
||
csr ^= SROMCS; EMIT;
|
||
csr = 0; EMIT;
|
||
}
|
||
|
||
|
||
static void
|
||
lmc_srom_read(lmc_softc_t * const sc)
|
||
{
|
||
unsigned idx;
|
||
const unsigned bitwidth = SROM_BITWIDTH;
|
||
const unsigned cmdmask = (SROMCMD_RD << bitwidth);
|
||
const unsigned msb = 1 << (bitwidth + 3 - 1);
|
||
unsigned lastidx = (1 << bitwidth) - 1;
|
||
|
||
lmc_srom_idle(sc);
|
||
|
||
for (idx = 0; idx <= lastidx; idx++) {
|
||
unsigned lastbit, data, bits, bit, csr;
|
||
csr = SROMSEL ; EMIT;
|
||
csr = SROMSEL | SROMRD; EMIT;
|
||
csr ^= SROMCSON; EMIT;
|
||
csr ^= SROMCLKON; EMIT;
|
||
|
||
lastbit = 0;
|
||
for (bits = idx|cmdmask, bit = bitwidth + 3
|
||
; bit > 0
|
||
; bit--, bits <<= 1) {
|
||
const unsigned thisbit = bits & msb;
|
||
csr ^= SROMCLKOFF; EMIT; /* clock L data invalid */
|
||
if (thisbit != lastbit) {
|
||
csr ^= SROMDOUT; EMIT;/* clock L invert data */
|
||
} else {
|
||
EMIT;
|
||
}
|
||
csr ^= SROMCLKON; EMIT; /* clock H data valid */
|
||
lastbit = thisbit;
|
||
}
|
||
csr ^= SROMCLKOFF; EMIT;
|
||
|
||
for (data = 0, bits = 0; bits < 16; bits++) {
|
||
data <<= 1;
|
||
csr ^= SROMCLKON; EMIT; /* clock H data valid */
|
||
data |= LMC_CSR_READ(sc, csr_srom_mii) & SROMDIN ? 1 : 0;
|
||
csr ^= SROMCLKOFF; EMIT; /* clock L data invalid */
|
||
}
|
||
sc->lmc_rombuf[idx*2] = data & 0xFF;
|
||
sc->lmc_rombuf[idx*2+1] = data >> 8;
|
||
csr = SROMSEL | SROMRD; EMIT;
|
||
csr = 0; EMIT;
|
||
}
|
||
lmc_srom_idle(sc);
|
||
}
|
||
|
||
#define MII_EMIT do { LMC_CSR_WRITE(sc, csr_srom_mii, csr); lmc_delay_300ns(sc); } while (0)
|
||
|
||
static void
|
||
lmc_mii_writebits(lmc_softc_t * const sc, unsigned data, unsigned bits)
|
||
{
|
||
unsigned msb = 1 << (bits - 1);
|
||
unsigned csr = LMC_CSR_READ(sc, csr_srom_mii) & (MII_RD|MII_DOUT|MII_CLK);
|
||
unsigned lastbit = (csr & MII_DOUT) ? msb : 0;
|
||
|
||
csr |= MII_WR; MII_EMIT; /* clock low; assert write */
|
||
|
||
for (; bits > 0; bits--, data <<= 1) {
|
||
const unsigned thisbit = data & msb;
|
||
if (thisbit != lastbit) {
|
||
csr ^= MII_DOUT; MII_EMIT; /* clock low; invert data */
|
||
}
|
||
csr ^= MII_CLKON; MII_EMIT; /* clock high; data valid */
|
||
lastbit = thisbit;
|
||
csr ^= MII_CLKOFF; MII_EMIT; /* clock low; data not valid */
|
||
}
|
||
}
|
||
|
||
static void
|
||
lmc_mii_turnaround(lmc_softc_t * const sc, unsigned cmd)
|
||
{
|
||
unsigned csr = LMC_CSR_READ(sc, csr_srom_mii) & (MII_RD|MII_DOUT|MII_CLK);
|
||
|
||
if (cmd == MII_WRCMD) {
|
||
csr |= MII_DOUT; MII_EMIT; /* clock low; change data */
|
||
csr ^= MII_CLKON; MII_EMIT; /* clock high; data valid */
|
||
csr ^= MII_CLKOFF; MII_EMIT; /* clock low; data not valid */
|
||
csr ^= MII_DOUT; MII_EMIT; /* clock low; change data */
|
||
} else {
|
||
csr |= MII_RD; MII_EMIT; /* clock low; switch to read */
|
||
}
|
||
csr ^= MII_CLKON; MII_EMIT; /* clock high; data valid */
|
||
csr ^= MII_CLKOFF; MII_EMIT; /* clock low; data not valid */
|
||
}
|
||
|
||
static unsigned
|
||
lmc_mii_readbits(lmc_softc_t * const sc)
|
||
{
|
||
unsigned data;
|
||
unsigned csr = LMC_CSR_READ(sc, csr_srom_mii) & (MII_RD|MII_DOUT|MII_CLK);
|
||
int idx;
|
||
|
||
for (idx = 0, data = 0; idx < 16; idx++) {
|
||
data <<= 1; /* this is NOOP on the first pass through */
|
||
csr ^= MII_CLKON; MII_EMIT; /* clock high; data valid */
|
||
if (LMC_CSR_READ(sc, csr_srom_mii) & MII_DIN)
|
||
data |= 1;
|
||
csr ^= MII_CLKOFF; MII_EMIT; /* clock low; data not valid */
|
||
}
|
||
csr ^= MII_RD; MII_EMIT; /* clock low; turn off read */
|
||
|
||
return data;
|
||
}
|
||
|
||
static unsigned
|
||
lmc_mii_readreg(lmc_softc_t * const sc, unsigned devaddr, unsigned regno)
|
||
{
|
||
unsigned csr = LMC_CSR_READ(sc, csr_srom_mii) & (MII_RD|MII_DOUT|MII_CLK);
|
||
unsigned data;
|
||
|
||
csr &= ~(MII_RD|MII_CLK); MII_EMIT;
|
||
lmc_mii_writebits(sc, MII_PREAMBLE, 32);
|
||
lmc_mii_writebits(sc, MII_RDCMD, 8);
|
||
lmc_mii_writebits(sc, devaddr, 5);
|
||
lmc_mii_writebits(sc, regno, 5);
|
||
lmc_mii_turnaround(sc, MII_RDCMD);
|
||
|
||
data = lmc_mii_readbits(sc);
|
||
return data;
|
||
}
|
||
|
||
static void
|
||
lmc_mii_writereg(lmc_softc_t * const sc, unsigned devaddr,
|
||
unsigned regno, unsigned data)
|
||
{
|
||
unsigned csr = LMC_CSR_READ(sc, csr_srom_mii) & (MII_RD|MII_DOUT|MII_CLK);
|
||
csr &= ~(MII_RD|MII_CLK); MII_EMIT;
|
||
lmc_mii_writebits(sc, MII_PREAMBLE, 32);
|
||
lmc_mii_writebits(sc, MII_WRCMD, 8);
|
||
lmc_mii_writebits(sc, devaddr, 5);
|
||
lmc_mii_writebits(sc, regno, 5);
|
||
lmc_mii_turnaround(sc, MII_WRCMD);
|
||
lmc_mii_writebits(sc, data, 16);
|
||
}
|
||
|
||
static int
|
||
lmc_read_macaddr(lmc_softc_t * const sc)
|
||
{
|
||
lmc_srom_read(sc);
|
||
|
||
bcopy(sc->lmc_rombuf + 20, sc->lmc_enaddr, 6);
|
||
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* Check to make certain there is a signal from the modem, and flicker
|
||
* lights as needed.
|
||
*/
|
||
static void
|
||
lmc_watchdog(lmc_softc_t * const sc)
|
||
{
|
||
int state;
|
||
u_int32_t ostatus;
|
||
u_int32_t link_status;
|
||
u_int32_t ticks;
|
||
|
||
state = 0;
|
||
|
||
link_status = sc->lmc_media->get_link_status(sc);
|
||
ostatus = ((sc->lmc_flags & LMC_MODEMOK) == LMC_MODEMOK);
|
||
|
||
/*
|
||
* hardware level link lost, but the interface is marked as up.
|
||
* Mark it as down.
|
||
*/
|
||
if (link_status == 0 && ostatus) {
|
||
printf(LMC_PRINTF_FMT ": physical link down\n",
|
||
LMC_PRINTF_ARGS);
|
||
sc->lmc_flags &= ~LMC_MODEMOK;
|
||
lmc_led_off(sc, LMC_MII16_LED1);
|
||
}
|
||
|
||
/*
|
||
* hardware link is up, but the interface is marked as down.
|
||
* Bring it back up again.
|
||
*/
|
||
if (link_status != 0 && !ostatus) {
|
||
printf(LMC_PRINTF_FMT ": physical link up\n",
|
||
LMC_PRINTF_ARGS);
|
||
if (sc->lmc_flags & LMC_IFUP)
|
||
lmc_ifup(sc);
|
||
return;
|
||
}
|
||
|
||
/*
|
||
* remember the timer value
|
||
*/
|
||
ticks = LMC_CSR_READ(sc, csr_gp_timer);
|
||
LMC_CSR_WRITE(sc, csr_gp_timer, 0xffffffffUL);
|
||
sc->ictl.ticks = 0x0000ffff - (ticks & 0x0000ffff);
|
||
|
||
sc->lmc_out_dog = LMC_DOG_HOLDOFF;
|
||
}
|
||
|
||
/*
|
||
* Mark the interface as "up" and enable TX/RX and TX/RX interrupts.
|
||
* This also does a full software reset.
|
||
*/
|
||
static void
|
||
lmc_ifup(lmc_softc_t * const sc)
|
||
{
|
||
untimeout(ng_lmc_watchdog_frame, sc, sc->lmc_handle);
|
||
sc->lmc_running = 0;
|
||
|
||
lmc_dec_reset(sc);
|
||
lmc_reset(sc);
|
||
|
||
sc->lmc_media->set_link_status(sc, 1);
|
||
sc->lmc_media->set_status(sc, NULL);
|
||
|
||
sc->lmc_flags |= LMC_IFUP;
|
||
|
||
/*
|
||
* select what interrupts we want to get
|
||
*/
|
||
sc->lmc_intrmask |= (TULIP_STS_NORMALINTR
|
||
| TULIP_STS_RXINTR
|
||
| TULIP_STS_TXINTR
|
||
| TULIP_STS_ABNRMLINTR
|
||
| TULIP_STS_SYSERROR
|
||
| TULIP_STS_TXSTOPPED
|
||
| TULIP_STS_TXUNDERFLOW
|
||
| TULIP_STS_RXSTOPPED
|
||
);
|
||
LMC_CSR_WRITE(sc, csr_intr, sc->lmc_intrmask);
|
||
|
||
sc->lmc_cmdmode |= TULIP_CMD_TXRUN;
|
||
sc->lmc_cmdmode |= TULIP_CMD_RXRUN;
|
||
LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode);
|
||
|
||
untimeout(ng_lmc_watchdog_frame, sc, sc->lmc_handle);
|
||
sc->lmc_handle = timeout(ng_lmc_watchdog_frame, sc, hz);
|
||
sc->lmc_running = 1;
|
||
|
||
/*
|
||
* check if the physical link is up
|
||
*/
|
||
if (sc->lmc_media->get_link_status(sc)) {
|
||
sc->lmc_flags |= LMC_MODEMOK;
|
||
lmc_led_on(sc, LMC_MII16_LED1);
|
||
}
|
||
}
|
||
|
||
/*
|
||
* Mark the interface as "down" and disable TX/RX and TX/RX interrupts.
|
||
* This is done by performing a full reset on the interface.
|
||
*/
|
||
static void
|
||
lmc_ifdown(lmc_softc_t * const sc)
|
||
{
|
||
untimeout(ng_lmc_watchdog_frame, sc, sc->lmc_handle);
|
||
sc->lmc_running = 0;
|
||
sc->lmc_flags &= ~LMC_IFUP;
|
||
|
||
sc->lmc_media->set_link_status(sc, 0);
|
||
lmc_led_off(sc, LMC_MII16_LED1);
|
||
|
||
lmc_dec_reset(sc);
|
||
lmc_reset(sc);
|
||
sc->lmc_media->set_status(sc, NULL);
|
||
}
|
||
|
||
static void
|
||
lmc_rx_intr(lmc_softc_t * const sc)
|
||
{
|
||
lmc_ringinfo_t * const ri = &sc->lmc_rxinfo;
|
||
int fillok = 1;
|
||
|
||
sc->lmc_rxtick++;
|
||
|
||
for (;;) {
|
||
tulip_desc_t *eop = ri->ri_nextin;
|
||
int total_len = 0, last_offset = 0;
|
||
struct mbuf *ms = NULL, *me = NULL;
|
||
int accept = 0;
|
||
|
||
if (fillok && sc->lmc_rxq.ifq_len < LMC_RXQ_TARGET)
|
||
goto queue_mbuf;
|
||
|
||
/*
|
||
* If the TULIP has no descriptors, there can't be any receive
|
||
* descriptors to process.
|
||
*/
|
||
if (eop == ri->ri_nextout)
|
||
break;
|
||
|
||
/*
|
||
* 90% of the packets will fit in one descriptor. So we
|
||
* optimize for that case.
|
||
*/
|
||
if ((((volatile tulip_desc_t *) eop)->d_status & (TULIP_DSTS_OWNER|TULIP_DSTS_RxFIRSTDESC|TULIP_DSTS_RxLASTDESC)) == (TULIP_DSTS_RxFIRSTDESC|TULIP_DSTS_RxLASTDESC)) {
|
||
_IF_DEQUEUE(&sc->lmc_rxq, ms);
|
||
me = ms;
|
||
} else {
|
||
/*
|
||
* If still owned by the TULIP, don't touch it.
|
||
*/
|
||
if (((volatile tulip_desc_t *)eop)->d_status & TULIP_DSTS_OWNER)
|
||
break;
|
||
|
||
/*
|
||
* It is possible (though improbable unless the
|
||
* BIG_PACKET support is enabled or MCLBYTES < 1518)
|
||
* for a received packet to cross more than one
|
||
* receive descriptor.
|
||
*/
|
||
while ((((volatile tulip_desc_t *) eop)->d_status & TULIP_DSTS_RxLASTDESC) == 0) {
|
||
if (++eop == ri->ri_last)
|
||
eop = ri->ri_first;
|
||
if (eop == ri->ri_nextout || ((((volatile tulip_desc_t *) eop)->d_status & TULIP_DSTS_OWNER))) {
|
||
return;
|
||
}
|
||
total_len++;
|
||
}
|
||
|
||
/*
|
||
* Dequeue the first buffer for the start of the
|
||
* packet. Hopefully this will be the only one we
|
||
* need to dequeue. However, if the packet consumed
|
||
* multiple descriptors, then we need to dequeue
|
||
* those buffers and chain to the starting mbuf.
|
||
* All buffers but the last buffer have the same
|
||
* length so we can set that now. (we add to
|
||
* last_offset instead of multiplying since we
|
||
* normally won't go into the loop and thereby
|
||
* saving ourselves from doing a multiplication
|
||
* by 0 in the normal case).
|
||
*/
|
||
_IF_DEQUEUE(&sc->lmc_rxq, ms);
|
||
for (me = ms; total_len > 0; total_len--) {
|
||
me->m_len = LMC_RX_BUFLEN;
|
||
last_offset += LMC_RX_BUFLEN;
|
||
_IF_DEQUEUE(&sc->lmc_rxq, me->m_next);
|
||
me = me->m_next;
|
||
}
|
||
}
|
||
|
||
/*
|
||
* Now get the size of received packet (minus the CRC).
|
||
*/
|
||
total_len = ((eop->d_status >> 16) & 0x7FFF);
|
||
if (sc->ictl.crc_length == 16)
|
||
total_len -= 2;
|
||
else
|
||
total_len -= 4;
|
||
|
||
sc->lmc_inbytes += total_len;
|
||
sc->lmc_inlast = 0;
|
||
|
||
if ((sc->lmc_flags & LMC_RXIGNORE) == 0
|
||
&& ((eop->d_status & LMC_DSTS_ERRSUM) == 0
|
||
)) {
|
||
me->m_len = total_len - last_offset;
|
||
sc->lmc_flags |= LMC_RXACT;
|
||
accept = 1;
|
||
} else {
|
||
sc->lmc_ierrors++;
|
||
if (eop->d_status & TULIP_DSTS_RxOVERFLOW) {
|
||
sc->lmc_dot3stats.dot3StatsInternalMacReceiveErrors++;
|
||
}
|
||
}
|
||
|
||
sc->lmc_ipackets++;
|
||
if (++eop == ri->ri_last)
|
||
eop = ri->ri_first;
|
||
ri->ri_nextin = eop;
|
||
|
||
queue_mbuf:
|
||
/*
|
||
* Either we are priming the TULIP with mbufs (m == NULL)
|
||
* or we are about to accept an mbuf for the upper layers
|
||
* so we need to allocate an mbuf to replace it. If we
|
||
* can't replace it, send up it anyways. This may cause
|
||
* us to drop packets in the future but that's better than
|
||
* being caught in livelock.
|
||
*
|
||
* Note that if this packet crossed multiple descriptors
|
||
* we don't even try to reallocate all the mbufs here.
|
||
* Instead we rely on the test of the beginning of
|
||
* the loop to refill for the extra consumed mbufs.
|
||
*/
|
||
if (accept || ms == NULL) {
|
||
struct mbuf *m0;
|
||
MGETHDR(m0, M_DONTWAIT, MT_DATA);
|
||
if (m0 != NULL) {
|
||
MCLGET(m0, M_DONTWAIT);
|
||
if ((m0->m_flags & M_EXT) == 0) {
|
||
m_freem(m0);
|
||
m0 = NULL;
|
||
}
|
||
}
|
||
if (accept) {
|
||
int error;
|
||
|
||
ms->m_pkthdr.len = total_len;
|
||
ms->m_pkthdr.rcvif = NULL;
|
||
NG_SEND_DATA_ONLY(error, sc->lmc_hook, ms);
|
||
}
|
||
ms = m0;
|
||
}
|
||
if (ms == NULL) {
|
||
/*
|
||
* Couldn't allocate a new buffer. Don't bother
|
||
* trying to replenish the receive queue.
|
||
*/
|
||
fillok = 0;
|
||
sc->lmc_flags |= LMC_RXBUFSLOW;
|
||
continue;
|
||
}
|
||
/*
|
||
* Now give the buffer(s) to the TULIP and save in our
|
||
* receive queue.
|
||
*/
|
||
do {
|
||
ri->ri_nextout->d_length1 = LMC_RX_BUFLEN;
|
||
ri->ri_nextout->d_addr1 = LMC_KVATOPHYS(sc, mtod(ms, caddr_t));
|
||
ri->ri_nextout->d_status = TULIP_DSTS_OWNER;
|
||
if (++ri->ri_nextout == ri->ri_last)
|
||
ri->ri_nextout = ri->ri_first;
|
||
me = ms->m_next;
|
||
ms->m_next = NULL;
|
||
_IF_ENQUEUE(&sc->lmc_rxq, ms);
|
||
} while ((ms = me) != NULL);
|
||
|
||
if (sc->lmc_rxq.ifq_len >= LMC_RXQ_TARGET)
|
||
sc->lmc_flags &= ~LMC_RXBUFSLOW;
|
||
}
|
||
}
|
||
|
||
static int
|
||
lmc_tx_intr(lmc_softc_t * const sc)
|
||
{
|
||
lmc_ringinfo_t * const ri = &sc->lmc_txinfo;
|
||
struct mbuf *m;
|
||
int xmits = 0;
|
||
int descs = 0;
|
||
|
||
sc->lmc_txtick++;
|
||
|
||
while (ri->ri_free < ri->ri_max) {
|
||
u_int32_t d_flag;
|
||
if (((volatile tulip_desc_t *) ri->ri_nextin)->d_status & TULIP_DSTS_OWNER)
|
||
break;
|
||
|
||
d_flag = ri->ri_nextin->d_flag;
|
||
if (d_flag & TULIP_DFLAG_TxLASTSEG) {
|
||
const u_int32_t d_status = ri->ri_nextin->d_status;
|
||
_IF_DEQUEUE(&sc->lmc_txq, m);
|
||
if (m != NULL) {
|
||
#if NBPFILTER > 0
|
||
if (sc->lmc_bpf != NULL)
|
||
LMC_BPF_MTAP(sc, m);
|
||
#endif
|
||
m_freem(m);
|
||
#if defined(LMC_DEBUG)
|
||
} else {
|
||
printf(LMC_PRINTF_FMT ": tx_intr: failed to dequeue mbuf?!?\n", LMC_PRINTF_ARGS);
|
||
#endif
|
||
}
|
||
xmits++;
|
||
if (d_status & LMC_DSTS_ERRSUM) {
|
||
sc->lmc_oerrors++;
|
||
if (d_status & TULIP_DSTS_TxUNDERFLOW)
|
||
sc->lmc_dot3stats.dot3StatsInternalTransmitUnderflows++;
|
||
} else {
|
||
if (d_status & TULIP_DSTS_TxDEFERRED)
|
||
sc->lmc_dot3stats.dot3StatsDeferredTransmissions++;
|
||
}
|
||
}
|
||
|
||
if (++ri->ri_nextin == ri->ri_last)
|
||
ri->ri_nextin = ri->ri_first;
|
||
|
||
ri->ri_free++;
|
||
descs++;
|
||
/*sc->lmc_if.if_flags &= ~IFF_OACTIVE;*/
|
||
sc->lmc_out_deficit++;
|
||
}
|
||
/*
|
||
* If nothing left to transmit, disable the timer.
|
||
* Else if progress, reset the timer back to 2 ticks.
|
||
*/
|
||
sc->lmc_opackets += xmits;
|
||
|
||
return descs;
|
||
}
|
||
|
||
static void
|
||
lmc_print_abnormal_interrupt (lmc_softc_t * const sc, u_int32_t csr)
|
||
{
|
||
printf(LMC_PRINTF_FMT ": Abnormal interrupt\n", LMC_PRINTF_ARGS);
|
||
}
|
||
|
||
static void
|
||
lmc_intr_handler(lmc_softc_t * const sc, int *progress_p)
|
||
{
|
||
u_int32_t csr;
|
||
|
||
while ((csr = LMC_CSR_READ(sc, csr_status)) & sc->lmc_intrmask) {
|
||
|
||
*progress_p = 1;
|
||
LMC_CSR_WRITE(sc, csr_status, csr);
|
||
|
||
if (csr & TULIP_STS_SYSERROR) {
|
||
sc->lmc_last_system_error = (csr & TULIP_STS_ERRORMASK) >> TULIP_STS_ERR_SHIFT;
|
||
if (sc->lmc_flags & LMC_NOMESSAGES) {
|
||
sc->lmc_flags |= LMC_SYSTEMERROR;
|
||
} else {
|
||
printf(LMC_PRINTF_FMT ": system error: %s\n",
|
||
LMC_PRINTF_ARGS,
|
||
lmc_system_errors[sc->lmc_last_system_error]);
|
||
}
|
||
sc->lmc_flags |= LMC_NEEDRESET;
|
||
sc->lmc_system_errors++;
|
||
break;
|
||
}
|
||
if (csr & (TULIP_STS_RXINTR | TULIP_STS_RXNOBUF)) {
|
||
u_int32_t misses = LMC_CSR_READ(sc, csr_missed_frames);
|
||
if (csr & TULIP_STS_RXNOBUF)
|
||
sc->lmc_dot3stats.dot3StatsMissedFrames += misses & 0xFFFF;
|
||
/*
|
||
* Pass 2.[012] of the 21140A-A[CDE] may hang and/or corrupt data
|
||
* on receive overflows.
|
||
*/
|
||
if ((misses & 0x0FFE0000) && (sc->lmc_features & LMC_HAVE_RXBADOVRFLW)) {
|
||
sc->lmc_dot3stats.dot3StatsInternalMacReceiveErrors++;
|
||
/*
|
||
* Stop the receiver process and spin until it's stopped.
|
||
* Tell rx_intr to drop the packets it dequeues.
|
||
*/
|
||
LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode & ~TULIP_CMD_RXRUN);
|
||
while ((LMC_CSR_READ(sc, csr_status) & TULIP_STS_RXSTOPPED) == 0)
|
||
;
|
||
LMC_CSR_WRITE(sc, csr_status, TULIP_STS_RXSTOPPED);
|
||
sc->lmc_flags |= LMC_RXIGNORE;
|
||
}
|
||
lmc_rx_intr(sc);
|
||
if (sc->lmc_flags & LMC_RXIGNORE) {
|
||
/*
|
||
* Restart the receiver.
|
||
*/
|
||
sc->lmc_flags &= ~LMC_RXIGNORE;
|
||
LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode);
|
||
}
|
||
}
|
||
if (csr & TULIP_STS_ABNRMLINTR) {
|
||
u_int32_t tmp = csr & sc->lmc_intrmask
|
||
& ~(TULIP_STS_NORMALINTR|TULIP_STS_ABNRMLINTR);
|
||
if (csr & TULIP_STS_TXUNDERFLOW) {
|
||
if ((sc->lmc_cmdmode & TULIP_CMD_THRESHOLDCTL) != TULIP_CMD_THRSHLD160) {
|
||
sc->lmc_cmdmode += TULIP_CMD_THRSHLD96;
|
||
sc->lmc_flags |= LMC_NEWTXTHRESH;
|
||
} else if (sc->lmc_features & LMC_HAVE_STOREFWD) {
|
||
sc->lmc_cmdmode |= TULIP_CMD_STOREFWD;
|
||
sc->lmc_flags |= LMC_NEWTXTHRESH;
|
||
}
|
||
}
|
||
if (sc->lmc_flags & LMC_NOMESSAGES) {
|
||
sc->lmc_statusbits |= tmp;
|
||
} else {
|
||
lmc_print_abnormal_interrupt(sc, tmp);
|
||
sc->lmc_flags |= LMC_NOMESSAGES;
|
||
}
|
||
LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode);
|
||
}
|
||
|
||
if (csr & TULIP_STS_TXINTR)
|
||
lmc_tx_intr(sc);
|
||
|
||
if (sc->lmc_flags & LMC_WANTTXSTART)
|
||
lmc_ifstart(sc);
|
||
}
|
||
}
|
||
|
||
static lmc_intrfunc_t
|
||
lmc_intr_normal(void *arg)
|
||
{
|
||
lmc_softc_t * sc = (lmc_softc_t *) arg;
|
||
int progress = 0;
|
||
|
||
lmc_intr_handler(sc, &progress);
|
||
|
||
#if !defined(LMC_VOID_INTRFUNC)
|
||
return progress;
|
||
#endif
|
||
}
|
||
|
||
static struct mbuf *
|
||
lmc_mbuf_compress(struct mbuf *m)
|
||
{
|
||
struct mbuf *m0;
|
||
#if MCLBYTES >= LMC_MTU + PPP_HEADER_LEN && !defined(BIG_PACKET)
|
||
MGETHDR(m0, M_DONTWAIT, MT_DATA);
|
||
if (m0 != NULL) {
|
||
if (m->m_pkthdr.len > MHLEN) {
|
||
MCLGET(m0, M_DONTWAIT);
|
||
if ((m0->m_flags & M_EXT) == 0) {
|
||
m_freem(m);
|
||
m_freem(m0);
|
||
return NULL;
|
||
}
|
||
}
|
||
m_copydata(m, 0, m->m_pkthdr.len, mtod(m0, caddr_t));
|
||
m0->m_pkthdr.len = m0->m_len = m->m_pkthdr.len;
|
||
}
|
||
#else
|
||
int mlen = MHLEN;
|
||
int len = m->m_pkthdr.len;
|
||
struct mbuf **mp = &m0;
|
||
|
||
while (len > 0) {
|
||
if (mlen == MHLEN) {
|
||
MGETHDR(*mp, M_DONTWAIT, MT_DATA);
|
||
} else {
|
||
MGET(*mp, M_DONTWAIT, MT_DATA);
|
||
}
|
||
if (*mp == NULL) {
|
||
m_freem(m0);
|
||
m0 = NULL;
|
||
break;
|
||
}
|
||
if (len > MLEN) {
|
||
MCLGET(*mp, M_DONTWAIT);
|
||
if (((*mp)->m_flags & M_EXT) == 0) {
|
||
m_freem(m0);
|
||
m0 = NULL;
|
||
break;
|
||
}
|
||
(*mp)->m_len = (len <= MCLBYTES ? len : MCLBYTES);
|
||
} else {
|
||
(*mp)->m_len = (len <= mlen ? len : mlen);
|
||
}
|
||
m_copydata(m, m->m_pkthdr.len - len,
|
||
(*mp)->m_len, mtod((*mp), caddr_t));
|
||
len -= (*mp)->m_len;
|
||
mp = &(*mp)->m_next;
|
||
mlen = MLEN;
|
||
}
|
||
#endif
|
||
m_freem(m);
|
||
return m0;
|
||
}
|
||
|
||
/*
|
||
* queue the mbuf handed to us for the interface. If we cannot
|
||
* queue it, return the mbuf. Return NULL if the mbuf was queued.
|
||
*/
|
||
static struct mbuf *
|
||
lmc_txput(lmc_softc_t * const sc, struct mbuf *m)
|
||
{
|
||
lmc_ringinfo_t * const ri = &sc->lmc_txinfo;
|
||
tulip_desc_t *eop, *nextout;
|
||
int segcnt, free;
|
||
u_int32_t d_status;
|
||
struct mbuf *m0;
|
||
|
||
#if defined(LMC_DEBUG)
|
||
if ((sc->lmc_cmdmode & TULIP_CMD_TXRUN) == 0) {
|
||
printf(LMC_PRINTF_FMT ": txput: tx not running\n",
|
||
LMC_PRINTF_ARGS);
|
||
sc->lmc_flags |= LMC_WANTTXSTART;
|
||
goto finish;
|
||
}
|
||
#endif
|
||
|
||
/*
|
||
* Now we try to fill in our transmit descriptors. This is
|
||
* a bit reminiscent of going on the Ark two by two
|
||
* since each descriptor for the TULIP can describe
|
||
* two buffers. So we advance through packet filling
|
||
* each of the two entries at a time to fill each
|
||
* descriptor. Clear the first and last segment bits
|
||
* in each descriptor (actually just clear everything
|
||
* but the end-of-ring or chain bits) to make sure
|
||
* we don't get messed up by previously sent packets.
|
||
*
|
||
* We may fail to put the entire packet on the ring if
|
||
* there is either not enough ring entries free or if the
|
||
* packet has more than MAX_TXSEG segments. In the former
|
||
* case we will just wait for the ring to empty. In the
|
||
* latter case we have to recopy.
|
||
*/
|
||
again:
|
||
d_status = 0;
|
||
eop = nextout = ri->ri_nextout;
|
||
m0 = m;
|
||
segcnt = 0;
|
||
free = ri->ri_free;
|
||
do {
|
||
int len = m0->m_len;
|
||
caddr_t addr = mtod(m0, caddr_t);
|
||
unsigned clsize = CLBYTES - (((u_long) addr) & (CLBYTES-1));
|
||
|
||
while (len > 0) {
|
||
unsigned slen = min(len, clsize);
|
||
#ifdef BIG_PACKET
|
||
int partial = 0;
|
||
if (slen >= 2048)
|
||
slen = 2040, partial = 1;
|
||
#endif
|
||
segcnt++;
|
||
if (segcnt > LMC_MAX_TXSEG) {
|
||
/*
|
||
* The packet exceeds the number of transmit
|
||
* buffer entries that we can use for one
|
||
* packet, so we have recopy it into one mbuf
|
||
* and then try again.
|
||
*/
|
||
m = lmc_mbuf_compress(m);
|
||
if (m == NULL)
|
||
goto finish;
|
||
goto again;
|
||
}
|
||
if (segcnt & 1) {
|
||
if (--free == 0) {
|
||
/*
|
||
* See if there's any unclaimed space
|
||
* in the transmit ring.
|
||
*/
|
||
if ((free += lmc_tx_intr(sc)) == 0) {
|
||
/*
|
||
* There's no more room but
|
||
* since nothing has been
|
||
* committed at this point,
|
||
* just show output is active,
|
||
* put back the mbuf and
|
||
* return.
|
||
*/
|
||
sc->lmc_flags |= LMC_WANTTXSTART;
|
||
goto finish;
|
||
}
|
||
}
|
||
eop = nextout;
|
||
if (++nextout == ri->ri_last)
|
||
nextout = ri->ri_first;
|
||
eop->d_flag &= TULIP_DFLAG_ENDRING;
|
||
eop->d_flag |= TULIP_DFLAG_TxNOPADDING;
|
||
if (sc->ictl.crc_length == 16)
|
||
eop->d_flag |= TULIP_DFLAG_TxHASCRC;
|
||
eop->d_status = d_status;
|
||
eop->d_addr1 = LMC_KVATOPHYS(sc, addr);
|
||
eop->d_length1 = slen;
|
||
} else {
|
||
/*
|
||
* Fill in second half of descriptor
|
||
*/
|
||
eop->d_addr2 = LMC_KVATOPHYS(sc, addr);
|
||
eop->d_length2 = slen;
|
||
}
|
||
d_status = TULIP_DSTS_OWNER;
|
||
len -= slen;
|
||
addr += slen;
|
||
#ifdef BIG_PACKET
|
||
if (partial)
|
||
continue;
|
||
#endif
|
||
clsize = CLBYTES;
|
||
}
|
||
} while ((m0 = m0->m_next) != NULL);
|
||
|
||
|
||
/*
|
||
* The descriptors have been filled in. Now get ready
|
||
* to transmit.
|
||
*/
|
||
_IF_ENQUEUE(&sc->lmc_txq, m);
|
||
m = NULL;
|
||
|
||
/*
|
||
* Make sure the next descriptor after this packet is owned
|
||
* by us since it may have been set up above if we ran out
|
||
* of room in the ring.
|
||
*/
|
||
nextout->d_status = 0;
|
||
|
||
/*
|
||
* If we only used the first segment of the last descriptor,
|
||
* make sure the second segment will not be used.
|
||
*/
|
||
if (segcnt & 1) {
|
||
eop->d_addr2 = 0;
|
||
eop->d_length2 = 0;
|
||
}
|
||
|
||
/*
|
||
* Mark the last and first segments, indicate we want a transmit
|
||
* complete interrupt, and tell it to transmit!
|
||
*/
|
||
eop->d_flag |= TULIP_DFLAG_TxLASTSEG | TULIP_DFLAG_TxWANTINTR;
|
||
|
||
/*
|
||
* Note that ri->ri_nextout is still the start of the packet
|
||
* and until we set the OWNER bit, we can still back out of
|
||
* everything we have done.
|
||
*/
|
||
ri->ri_nextout->d_flag |= TULIP_DFLAG_TxFIRSTSEG;
|
||
ri->ri_nextout->d_status = TULIP_DSTS_OWNER;
|
||
|
||
LMC_CSR_WRITE(sc, csr_txpoll, 1);
|
||
|
||
/*
|
||
* This advances the ring for us.
|
||
*/
|
||
ri->ri_nextout = nextout;
|
||
ri->ri_free = free;
|
||
|
||
/*
|
||
* switch back to the single queueing ifstart.
|
||
*/
|
||
sc->lmc_flags &= ~LMC_WANTTXSTART;
|
||
sc->lmc_xmit_busy = 0;
|
||
sc->lmc_out_dog = 0;
|
||
|
||
/*
|
||
* If we want a txstart, there must be not enough space in the
|
||
* transmit ring. So we want to enable transmit done interrupts
|
||
* so we can immediately reclaim some space. When the transmit
|
||
* interrupt is posted, the interrupt handler will call tx_intr
|
||
* to reclaim space and then txstart (since WANTTXSTART is set).
|
||
* txstart will move the packet into the transmit ring and clear
|
||
* WANTTXSTART thereby causing TXINTR to be cleared.
|
||
*/
|
||
finish:
|
||
|
||
return m;
|
||
}
|
||
|
||
|
||
/*
|
||
* These routines gets called at device spl
|
||
*/
|
||
|
||
static ifnet_ret_t
|
||
lmc_ifstart(lmc_softc_t * const sc)
|
||
{
|
||
struct mbuf *m;
|
||
|
||
if (sc->lmc_flags & LMC_IFUP) {
|
||
sc->lmc_xmit_busy = 1;
|
||
for(;;) {
|
||
struct ifqueue *q = &sc->lmc_xmitq_hipri;
|
||
IF_DEQUEUE(q, m);
|
||
if (m == NULL) {
|
||
q = &sc->lmc_xmitq;
|
||
IF_DEQUEUE(q, m);
|
||
}
|
||
if (m) {
|
||
sc->lmc_outbytes = m->m_pkthdr.len;
|
||
sc->lmc_opackets++;
|
||
if ((m = lmc_txput(sc, m)) != NULL) {
|
||
IF_PREPEND(q, m);
|
||
printf(LMC_PRINTF_FMT
|
||
": lmc_txput failed\n",
|
||
LMC_PRINTF_ARGS);
|
||
break;
|
||
}
|
||
LMC_CSR_WRITE(sc, csr_txpoll, 1);
|
||
}
|
||
else
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
|
||
static ifnet_ret_t
|
||
lmc_ifstart_one(lmc_softc_t * const sc)
|
||
{
|
||
struct mbuf *m;
|
||
|
||
if ((sc->lmc_flags & LMC_IFUP)) {
|
||
struct ifqueue *q = &sc->lmc_xmitq_hipri;
|
||
IF_DEQUEUE(q, m);
|
||
if (m == NULL) {
|
||
q = &sc->lmc_xmitq;
|
||
IF_DEQUEUE(q, m);
|
||
}
|
||
if (m) {
|
||
sc->lmc_outbytes += m->m_pkthdr.len;
|
||
sc->lmc_opackets++;
|
||
if ((m = lmc_txput(sc, m)) != NULL) {
|
||
IF_PREPEND(q, m);
|
||
}
|
||
LMC_CSR_WRITE(sc, csr_txpoll, 1);
|
||
}
|
||
}
|
||
}
|
||
|
||
/*
|
||
* Set up the OS interface magic and attach to the operating system
|
||
* network services.
|
||
*/
|
||
static int
|
||
lmc_attach(lmc_softc_t * const sc)
|
||
{
|
||
/*
|
||
* we have found a node, make sure our 'type' is availabe.
|
||
*/
|
||
if (ng_lmc_done_init == 0) ng_lmc_init(NULL);
|
||
if (ng_make_node_common(&typestruct, &sc->lmc_node) != 0)
|
||
return (0);
|
||
sprintf(sc->lmc_nodename, "%s%d", NG_LMC_NODE_TYPE, sc->lmc_unit);
|
||
if (ng_name_node(sc->lmc_node, sc->lmc_nodename)) {
|
||
NG_NODE_UNREF(sc->lmc_node); /* make it go away again */
|
||
return (0);
|
||
}
|
||
NG_NODE_SET_PRIVATE(sc->lmc_node, sc);
|
||
callout_handle_init(&sc->lmc_handle);
|
||
sc->lmc_xmitq.ifq_maxlen = IFQ_MAXLEN;
|
||
sc->lmc_xmitq_hipri.ifq_maxlen = IFQ_MAXLEN;
|
||
mtx_init(&sc->lmc_xmitq.ifq_mtx, "lmc_xmitq", NULL, MTX_DEF);
|
||
mtx_init(&sc->lmc_xmitq_hipri.ifq_mtx, "lmc_xmitq_hipri", NULL, MTX_DEF);
|
||
sc->lmc_running = 0;
|
||
|
||
/*
|
||
* turn off those LEDs...
|
||
*/
|
||
sc->lmc_miireg16 |= LMC_MII16_LED_ALL;
|
||
lmc_led_on(sc, LMC_MII16_LED0);
|
||
|
||
return 1;
|
||
}
|
||
|
||
static void
|
||
lmc_initring(lmc_softc_t * const sc, lmc_ringinfo_t * const ri,
|
||
tulip_desc_t *descs, int ndescs)
|
||
{
|
||
ri->ri_max = ndescs;
|
||
ri->ri_first = descs;
|
||
ri->ri_last = ri->ri_first + ri->ri_max;
|
||
bzero((caddr_t) ri->ri_first, sizeof(ri->ri_first[0]) * ri->ri_max);
|
||
ri->ri_last[-1].d_flag = TULIP_DFLAG_ENDRING;
|
||
}
|
||
|
||
|
||
|
||
#ifdef LMC_DEBUG
|
||
static void
|
||
ng_lmc_dump_packet(struct mbuf *m)
|
||
{
|
||
int i;
|
||
|
||
printf("mbuf: %d bytes, %s packet\n", m->m_len,
|
||
(m->m_type == MT_DATA)?"data":"other");
|
||
|
||
for (i=0; i < m->m_len; i++) {
|
||
if( (i % 8) == 0 ) {
|
||
if( i ) printf("\n");
|
||
printf("\t");
|
||
}
|
||
else
|
||
printf(" ");
|
||
printf( "0x%02x", m->m_dat[i] );
|
||
}
|
||
printf("\n");
|
||
}
|
||
#endif /* LMC_DEBUG */
|
||
|
||
/* Device timeout/watchdog routine */
|
||
static void
|
||
ng_lmc_watchdog_frame(void *arg)
|
||
{
|
||
lmc_softc_t * sc = (lmc_softc_t *) arg;
|
||
int s;
|
||
int speed;
|
||
|
||
if(sc->lmc_running == 0)
|
||
return; /* if we are not running let timeouts die */
|
||
/*
|
||
* calculate the apparent throughputs
|
||
* XXX a real hack
|
||
*/
|
||
s = splimp();
|
||
speed = sc->lmc_inbytes - sc->lmc_lastinbytes;
|
||
sc->lmc_lastinbytes = sc->lmc_inbytes;
|
||
if ( sc->lmc_inrate < speed )
|
||
sc->lmc_inrate = speed;
|
||
speed = sc->lmc_outbytes - sc->lmc_lastoutbytes;
|
||
sc->lmc_lastoutbytes = sc->lmc_outbytes;
|
||
if ( sc->lmc_outrate < speed )
|
||
sc->lmc_outrate = speed;
|
||
sc->lmc_inlast++;
|
||
splx(s);
|
||
|
||
if ((sc->lmc_inlast > LMC_QUITE_A_WHILE)
|
||
&& (sc->lmc_out_deficit > LMC_LOTS_OF_PACKETS)) {
|
||
log(LOG_ERR, "%s%d: No response from remote end\n",
|
||
sc->lmc_name, sc->lmc_unit);
|
||
s = splimp();
|
||
lmc_ifdown(sc);
|
||
lmc_ifup(sc);
|
||
sc->lmc_inlast = sc->lmc_out_deficit = 0;
|
||
splx(s);
|
||
} else if (sc->lmc_xmit_busy) {
|
||
if (sc->lmc_out_dog == 0) {
|
||
log(LOG_ERR, "ar%d: Transmit failure.. no clock?\n",
|
||
sc->lmc_unit);
|
||
s = splimp();
|
||
lmc_watchdog(sc);
|
||
#if 0
|
||
lmc_ifdown(sc);
|
||
lmc_ifup(sc);
|
||
#endif
|
||
splx(s);
|
||
sc->lmc_inlast = sc->lmc_out_deficit = 0;
|
||
} else {
|
||
sc->lmc_out_dog--;
|
||
}
|
||
}
|
||
lmc_watchdog(sc);
|
||
sc->lmc_handle = timeout(ng_lmc_watchdog_frame, sc, hz);
|
||
}
|
||
|
||
/***********************************************************************
|
||
* This section contains the methods for the Netgraph interface
|
||
***********************************************************************/
|
||
/*
|
||
* It is not possible or allowable to create a node of this type.
|
||
* If the hardware exists, it will already have created it.
|
||
*/
|
||
static int
|
||
ng_lmc_constructor(node_p node)
|
||
{
|
||
return (EINVAL);
|
||
}
|
||
|
||
/*
|
||
* give our ok for a hook to be added...
|
||
* If we are not running this should kick the device into life.
|
||
* We allow hooks called "control", "rawdata", and "debug".
|
||
* The hook's private info points to our stash of info about that
|
||
* device.
|
||
*/
|
||
static int
|
||
ng_lmc_newhook(node_p node, hook_p hook, const char *name)
|
||
{
|
||
lmc_softc_t * sc = NG_NODE_PRIVATE(node);
|
||
|
||
/*
|
||
* check if it's our friend the debug hook
|
||
*/
|
||
if (strcmp(name, NG_LMC_HOOK_DEBUG) == 0) {
|
||
NG_HOOK_SET_PRIVATE(hook, NULL); /* paranoid */
|
||
sc->lmc_debug_hook = hook;
|
||
return (0);
|
||
}
|
||
|
||
/*
|
||
* Check for raw mode hook.
|
||
*/
|
||
if (strcmp(name, NG_LMC_HOOK_RAW) != 0) {
|
||
return (EINVAL);
|
||
}
|
||
NG_HOOK_SET_PRIVATE(hook, sc);
|
||
sc->lmc_hook = hook;
|
||
sc->lmc_datahooks++;
|
||
lmc_ifup(sc);
|
||
return (0);
|
||
}
|
||
|
||
/*
|
||
* incoming messages.
|
||
* Just respond to the generic TEXT_STATUS message
|
||
*/
|
||
static int
|
||
ng_lmc_rcvmsg(node_p node, item_p item, hook_p lasthook)
|
||
{
|
||
lmc_softc_t *sc = NG_NODE_PRIVATE(node);
|
||
struct ng_mesg *resp = NULL;
|
||
int error = 0;
|
||
struct ng_mesg *msg;
|
||
|
||
NGI_GET_MSG(item, msg);
|
||
switch (msg->header.typecookie) {
|
||
case NG_LMC_COOKIE:
|
||
switch (msg->header.cmd) {
|
||
case NGM_LMC_GET_CTL:
|
||
{
|
||
lmc_ctl_t *ctl;
|
||
|
||
NG_MKRESPONSE(resp, msg, sizeof(*ctl), M_NOWAIT);
|
||
if (!resp) {
|
||
error = ENOMEM;
|
||
break;
|
||
}
|
||
ctl = (lmc_ctl_t *) resp->data;
|
||
memcpy( ctl, &sc->ictl, sizeof(*ctl) );
|
||
break;
|
||
}
|
||
case NGM_LMC_SET_CTL:
|
||
{
|
||
lmc_ctl_t *ctl;
|
||
|
||
if (msg->header.arglen != sizeof(*ctl)) {
|
||
error = EINVAL;
|
||
break;
|
||
}
|
||
|
||
ctl = (lmc_ctl_t *) msg->data;
|
||
sc->lmc_media->set_status(sc, ctl);
|
||
break;
|
||
}
|
||
default:
|
||
error = EINVAL; /* unknown command */
|
||
break;
|
||
}
|
||
break;
|
||
case NGM_GENERIC_COOKIE:
|
||
switch(msg->header.cmd) {
|
||
case NGM_TEXT_STATUS: {
|
||
char *arg;
|
||
int pos = 0;
|
||
|
||
int resplen = sizeof(struct ng_mesg) + 512;
|
||
NG_MKRESPONSE(resp, msg, resplen, M_NOWAIT);
|
||
if (resp == NULL) {
|
||
error = ENOMEM;
|
||
break;
|
||
}
|
||
arg = (resp)->data;
|
||
|
||
/*
|
||
* Put in the throughput information.
|
||
*/
|
||
pos = sprintf(arg, "%ld bytes in, %ld bytes out\n"
|
||
"highest rate seen: %ld B/S in, "
|
||
"%ld B/S out\n",
|
||
sc->lmc_inbytes, sc->lmc_outbytes,
|
||
sc->lmc_inrate, sc->lmc_outrate);
|
||
pos += sprintf(arg + pos, "%ld output errors\n",
|
||
sc->lmc_oerrors);
|
||
pos += sprintf(arg + pos, "%ld input errors\n",
|
||
sc->lmc_ierrors);
|
||
|
||
resp->header.arglen = pos + 1;
|
||
break;
|
||
}
|
||
default:
|
||
error = EINVAL;
|
||
break;
|
||
}
|
||
break;
|
||
default:
|
||
error = EINVAL;
|
||
break;
|
||
}
|
||
|
||
/* Take care of synchronous response, if any */
|
||
NG_RESPOND_MSG(error, node, item, resp);
|
||
NG_FREE_MSG(msg);
|
||
return (error);
|
||
}
|
||
|
||
/*
|
||
* get data from another node and transmit it to the line
|
||
*/
|
||
static int
|
||
ng_lmc_rcvdata(hook_p hook, item_p item)
|
||
{
|
||
int s;
|
||
int error = 0;
|
||
lmc_softc_t * sc = (lmc_softc_t *) NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
|
||
struct ifqueue *xmitq_p;
|
||
struct mbuf *m;
|
||
meta_p meta;
|
||
|
||
/* Unpack all the data components */
|
||
NGI_GET_M(item, m);
|
||
NGI_GET_META(item, meta);
|
||
NG_FREE_ITEM(item);
|
||
|
||
/*
|
||
* data doesn't come in from just anywhere (e.g control hook)
|
||
*/
|
||
if ( NG_HOOK_PRIVATE(hook) == NULL) {
|
||
error = ENETDOWN;
|
||
goto bad;
|
||
}
|
||
|
||
/*
|
||
* Now queue the data for when it can be sent
|
||
*/
|
||
if (meta && meta->priority > 0) {
|
||
xmitq_p = (&sc->lmc_xmitq_hipri);
|
||
} else {
|
||
xmitq_p = (&sc->lmc_xmitq);
|
||
}
|
||
s = splimp();
|
||
IF_LOCK(xmitq_p);
|
||
if (_IF_QFULL(xmitq_p)) {
|
||
_IF_DROP(xmitq_p);
|
||
IF_UNLOCK(xmitq_p);
|
||
splx(s);
|
||
error = ENOBUFS;
|
||
goto bad;
|
||
}
|
||
_IF_ENQUEUE(xmitq_p, m);
|
||
IF_UNLOCK(xmitq_p);
|
||
lmc_ifstart_one(sc);
|
||
splx(s);
|
||
return (0);
|
||
|
||
bad:
|
||
/*
|
||
* It was an error case.
|
||
* check if we need to free the mbuf, and then return the error
|
||
*/
|
||
NG_FREE_M(m);
|
||
NG_FREE_META(meta);
|
||
return (error);
|
||
}
|
||
|
||
/*
|
||
* do local shutdown processing..
|
||
* this node will refuse to go away, unless the hardware says to..
|
||
* don't unref the node, or remove our name. just clear our links up.
|
||
*/
|
||
static int
|
||
ng_lmc_rmnode(node_p node)
|
||
{
|
||
lmc_softc_t * sc = NG_NODE_PRIVATE(node);
|
||
|
||
lmc_ifdown(sc);
|
||
|
||
/*
|
||
* Get rid of the old node.
|
||
*/
|
||
NG_NODE_SET_PRIVATE(node, NULL);
|
||
NG_NODE_UNREF(node);
|
||
|
||
/*
|
||
* Create a new node. This is basically what a device
|
||
* driver would do in the attach routine. So let's just do that..
|
||
* The node is dead, long live the node!
|
||
*/
|
||
if (ng_make_node_common(&typestruct, &sc->lmc_node) != 0)
|
||
return (0);
|
||
sprintf(sc->lmc_nodename, "%s%d", NG_LMC_NODE_TYPE, sc->lmc_unit);
|
||
if (ng_name_node(sc->lmc_node, sc->lmc_nodename)) {
|
||
sc->lmc_node = NULL; /* to be sure */
|
||
NG_NODE_UNREF(sc->lmc_node); /* make it go away */
|
||
return (0);
|
||
}
|
||
NG_NODE_SET_PRIVATE(sc->lmc_node, sc);
|
||
callout_handle_init(&sc->lmc_handle);
|
||
sc->lmc_running = 0;
|
||
/*
|
||
* turn off those LEDs...
|
||
*/
|
||
sc->lmc_miireg16 |= LMC_MII16_LED_ALL;
|
||
lmc_led_on(sc, LMC_MII16_LED0);
|
||
return (0);
|
||
}
|
||
/* already linked */
|
||
static int
|
||
ng_lmc_connect(hook_p hook)
|
||
{
|
||
/* We are probably not at splnet.. force outward queueing */
|
||
NG_HOOK_FORCE_QUEUE(NG_HOOK_PEER(hook));
|
||
/* be really amiable and just say "YUP that's OK by me! " */
|
||
return (0);
|
||
}
|
||
|
||
/*
|
||
* notify on hook disconnection (destruction)
|
||
*
|
||
* For this type, removal of the last link resets tries to destroy the node.
|
||
* As the device still exists, the shutdown method will not actually
|
||
* destroy the node, but reset the device and leave it 'fresh' :)
|
||
*
|
||
* The node removal code will remove all references except that owned by the
|
||
* driver.
|
||
*/
|
||
static int
|
||
ng_lmc_disconnect(hook_p hook)
|
||
{
|
||
lmc_softc_t * sc = (lmc_softc_t *) NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
|
||
int s;
|
||
/*
|
||
* If it's the data hook, then free resources etc.
|
||
*/
|
||
if (NG_HOOK_PRIVATE(hook)) {
|
||
s = splimp();
|
||
sc->lmc_datahooks--;
|
||
if (sc->lmc_datahooks == 0)
|
||
lmc_ifdown(sc);
|
||
splx(s);
|
||
} else {
|
||
sc->lmc_debug_hook = NULL;
|
||
}
|
||
return (0);
|
||
}
|
||
|
||
/*
|
||
* called during bootup
|
||
* or LKM loading to put this type into the list of known modules
|
||
*/
|
||
static void
|
||
ng_lmc_init(void *ignored)
|
||
{
|
||
if (ng_newtype(&typestruct))
|
||
printf("ng_lmc install failed\n");
|
||
ng_lmc_done_init = 1;
|
||
}
|
||
|
||
/*
|
||
* This is the PCI configuration support.
|
||
*/
|
||
#define PCI_CFID 0x00 /* Configuration ID */
|
||
#define PCI_CFCS 0x04 /* Configurtion Command/Status */
|
||
#define PCI_CFRV 0x08 /* Configuration Revision */
|
||
#define PCI_CFLT 0x0c /* Configuration Latency Timer */
|
||
#define PCI_CBIO 0x10 /* Configuration Base IO Address */
|
||
#define PCI_CBMA 0x14 /* Configuration Base Memory Address */
|
||
#define PCI_SSID 0x2c /* subsystem config register */
|
||
#define PCI_CFIT 0x3c /* Configuration Interrupt */
|
||
#define PCI_CFDA 0x40 /* Configuration Driver Area */
|
||
|
||
|
||
|
||
#include "dev/lmc/if_lmc_fbsd3.c"
|
||
|
||
#endif
|