freebsd-skq/sys/gnu/ext2fs/ext2_bmap.c
mckusick acc66855bf This patch corrects the first round of panics and hangs reported
with the new snapshot code.

Update addaliasu to correctly implement the semantics of the old
checkalias function. When a device vnode first comes into existence,
check to see if an anonymous vnode for the same device was created
at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than
creating a new vnode for the device. This corrects a problem which
caused the kernel to panic when taking a snapshot of the root
filesystem.

Change the calling convention of vn_write_suspend_wait() to be the
same as vn_start_write().

Split out softdep_flushworklist() from softdep_flushfiles() so that
it can be used to clear the work queue when suspending filesystem
operations.

Access to buffers becomes recursive so that snapshots can recursively
traverse their indirect blocks using ffs_copyonwrite() when checking
for the need for copy on write when flushing one of their own indirect
blocks. This eliminates a deadlock between the syncer daemon and a
process taking a snapshot.

Ensure that softdep_process_worklist() can never block because of a
snapshot being taken. This eliminates a problem with buffer starvation.

Cleanup change in ffs_sync() which did not synchronously wait when
MNT_WAIT was specified. The result was an unclean filesystem panic
when doing forcible unmount with heavy filesystem I/O in progress.

Return a zero'ed block when reading a block that was not in use at
the time that a snapshot was taken. Normally, these blocks should
never be read. However, the readahead code will occationally read
them which can cause unexpected behavior.

Clean up the debugging code that ensures that no blocks be written
on a filesystem while it is suspended. Snapshots must explicitly
label the blocks that they are writing during the suspension so that
they do not cause a `write on suspended filesystem' panic.

Reorganize ffs_copyonwrite() to eliminate a deadlock and also to
prevent a race condition that would permit the same block to be
copied twice. This change eliminates an unexpected soft updates
inconsistency in fsck caused by the double allocation.

Use bqrelse rather than brelse for buffers that will be needed
soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00

354 lines
10 KiB
C

/*
* Copyright (c) 1989, 1991, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ufs_bmap.c 8.7 (Berkeley) 3/21/95
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/mount.h>
#include <sys/resourcevar.h>
#include <sys/stat.h>
#include <ufs/ufs/extattr.h>
#include <ufs/ufs/quota.h>
#include <ufs/ufs/inode.h>
#include <ufs/ufs/ufsmount.h>
#include <ufs/ufs/ufs_extern.h>
/*
* Bmap converts a the logical block number of a file to its physical block
* number on the disk. The conversion is done by using the logical block
* number to index into the array of block pointers described by the dinode.
*/
int
ufs_bmap(ap)
struct vop_bmap_args /* {
struct vnode *a_vp;
ufs_daddr_t a_bn;
struct vnode **a_vpp;
ufs_daddr_t *a_bnp;
int *a_runp;
int *a_runb;
} */ *ap;
{
/*
* Check for underlying vnode requests and ensure that logical
* to physical mapping is requested.
*/
if (ap->a_vpp != NULL)
*ap->a_vpp = VTOI(ap->a_vp)->i_devvp;
if (ap->a_bnp == NULL)
return (0);
return (ufs_bmaparray(ap->a_vp, ap->a_bn, ap->a_bnp, NULL, NULL,
ap->a_runp, ap->a_runb));
}
/*
* Indirect blocks are now on the vnode for the file. They are given negative
* logical block numbers. Indirect blocks are addressed by the negative
* address of the first data block to which they point. Double indirect blocks
* are addressed by one less than the address of the first indirect block to
* which they point. Triple indirect blocks are addressed by one less than
* the address of the first double indirect block to which they point.
*
* ufs_bmaparray does the bmap conversion, and if requested returns the
* array of logical blocks which must be traversed to get to a block.
* Each entry contains the offset into that block that gets you to the
* next block and the disk address of the block (if it is assigned).
*/
int
ufs_bmaparray(vp, bn, bnp, ap, nump, runp, runb)
struct vnode *vp;
ufs_daddr_t bn;
ufs_daddr_t *bnp;
struct indir *ap;
int *nump;
int *runp;
int *runb;
{
register struct inode *ip;
struct buf *bp;
struct ufsmount *ump;
struct mount *mp;
struct vnode *devvp;
struct indir a[NIADDR+1], *xap;
ufs_daddr_t daddr;
long metalbn;
int error, num, maxrun = 0;
ip = VTOI(vp);
mp = vp->v_mount;
ump = VFSTOUFS(mp);
devvp = ump->um_devvp;
#ifdef DIAGNOSTIC
if ((ap != NULL && nump == NULL) || (ap == NULL && nump != NULL))
panic("ufs_bmaparray: invalid arguments");
#endif
if (runp) {
maxrun = mp->mnt_iosize_max / mp->mnt_stat.f_iosize - 1;
*runp = 0;
}
if (runb) {
*runb = 0;
}
xap = ap == NULL ? a : ap;
if (!nump)
nump = &num;
error = ufs_getlbns(vp, bn, xap, nump);
if (error)
return (error);
num = *nump;
if (num == 0) {
*bnp = blkptrtodb(ump, ip->i_db[bn]);
/*
* Since this is FFS independent code, we are out of
* scope for the definitions of BLK_NOCOPY and
* BLK_SNAP, but we do know that they will fall in
* the range 1..um_seqinc, so we use that test and
* return a request for a zeroed out buffer if attempts
* are made to read a BLK_NOCOPY or BLK_SNAP block.
*/
if ((ip->i_flags & SF_SNAPSHOT) &&
ip->i_db[bn] > 0 && ip->i_db[bn] < ump->um_seqinc) {
*bnp = -1;
} else if (*bnp == 0) {
if (ip->i_flags & SF_SNAPSHOT)
*bnp = blkptrtodb(ump, bn * ump->um_seqinc);
else
*bnp = -1;
} else if (runp) {
daddr_t bnb = bn;
for (++bn; bn < NDADDR && *runp < maxrun &&
is_sequential(ump, ip->i_db[bn - 1], ip->i_db[bn]);
++bn, ++*runp);
bn = bnb;
if (runb && (bn > 0)) {
for (--bn; (bn >= 0) && (*runb < maxrun) &&
is_sequential(ump, ip->i_db[bn],
ip->i_db[bn+1]);
--bn, ++*runb);
}
}
return (0);
}
/* Get disk address out of indirect block array */
daddr = ip->i_ib[xap->in_off];
for (bp = NULL, ++xap; --num; ++xap) {
/*
* Exit the loop if there is no disk address assigned yet and
* the indirect block isn't in the cache, or if we were
* looking for an indirect block and we've found it.
*/
metalbn = xap->in_lbn;
if ((daddr == 0 && !incore(vp, metalbn)) || metalbn == bn)
break;
/*
* If we get here, we've either got the block in the cache
* or we have a disk address for it, go fetch it.
*/
if (bp)
bqrelse(bp);
xap->in_exists = 1;
bp = getblk(vp, metalbn, mp->mnt_stat.f_iosize, 0, 0);
if ((bp->b_flags & B_CACHE) == 0) {
#ifdef DIAGNOSTIC
if (!daddr)
panic("ufs_bmaparray: indirect block not in cache");
#endif
bp->b_blkno = blkptrtodb(ump, daddr);
bp->b_iocmd = BIO_READ;
bp->b_flags &= ~B_INVAL;
bp->b_ioflags &= ~BIO_ERROR;
vfs_busy_pages(bp, 0);
BUF_STRATEGY(bp);
curproc->p_stats->p_ru.ru_inblock++; /* XXX */
error = bufwait(bp);
if (error) {
brelse(bp);
return (error);
}
}
daddr = ((ufs_daddr_t *)bp->b_data)[xap->in_off];
if (num == 1 && daddr && runp) {
for (bn = xap->in_off + 1;
bn < MNINDIR(ump) && *runp < maxrun &&
is_sequential(ump,
((ufs_daddr_t *)bp->b_data)[bn - 1],
((ufs_daddr_t *)bp->b_data)[bn]);
++bn, ++*runp);
bn = xap->in_off;
if (runb && bn) {
for(--bn; bn >= 0 && *runb < maxrun &&
is_sequential(ump, ((daddr_t *)bp->b_data)[bn],
((daddr_t *)bp->b_data)[bn+1]);
--bn, ++*runb);
}
}
}
if (bp)
bqrelse(bp);
/*
* Since this is FFS independent code, we are out of scope for the
* definitions of BLK_NOCOPY and BLK_SNAP, but we do know that they
* will fall in the range 1..um_seqinc, so we use that test and
* return a request for a zeroed out buffer if attempts are made
* to read a BLK_NOCOPY or BLK_SNAP block.
*/
if ((ip->i_flags & SF_SNAPSHOT) && daddr > 0 && daddr < ump->um_seqinc){
*bnp = -1;
return (0);
}
*bnp = blkptrtodb(ump, daddr);
if (*bnp == 0) {
if (ip->i_flags & SF_SNAPSHOT)
*bnp = blkptrtodb(ump, bn * ump->um_seqinc);
else
*bnp = -1;
}
return (0);
}
/*
* Create an array of logical block number/offset pairs which represent the
* path of indirect blocks required to access a data block. The first "pair"
* contains the logical block number of the appropriate single, double or
* triple indirect block and the offset into the inode indirect block array.
* Note, the logical block number of the inode single/double/triple indirect
* block appears twice in the array, once with the offset into the i_ib and
* once with the offset into the page itself.
*/
int
ufs_getlbns(vp, bn, ap, nump)
struct vnode *vp;
ufs_daddr_t bn;
struct indir *ap;
int *nump;
{
long blockcnt, metalbn, realbn;
struct ufsmount *ump;
int i, numlevels, off;
int64_t qblockcnt;
ump = VFSTOUFS(vp->v_mount);
if (nump)
*nump = 0;
numlevels = 0;
realbn = bn;
if ((long)bn < 0)
bn = -(long)bn;
/* The first NDADDR blocks are direct blocks. */
if (bn < NDADDR)
return (0);
/*
* Determine the number of levels of indirection. After this loop
* is done, blockcnt indicates the number of data blocks possible
* at the previous level of indirection, and NIADDR - i is the number
* of levels of indirection needed to locate the requested block.
*/
for (blockcnt = 1, i = NIADDR, bn -= NDADDR;; i--, bn -= blockcnt) {
if (i == 0)
return (EFBIG);
/*
* Use int64_t's here to avoid overflow for triple indirect
* blocks when longs have 32 bits and the block size is more
* than 4K.
*/
qblockcnt = (int64_t)blockcnt * MNINDIR(ump);
if (bn < qblockcnt)
break;
blockcnt = qblockcnt;
}
/* Calculate the address of the first meta-block. */
if (realbn >= 0)
metalbn = -(realbn - bn + NIADDR - i);
else
metalbn = -(-realbn - bn + NIADDR - i);
/*
* At each iteration, off is the offset into the bap array which is
* an array of disk addresses at the current level of indirection.
* The logical block number and the offset in that block are stored
* into the argument array.
*/
ap->in_lbn = metalbn;
ap->in_off = off = NIADDR - i;
ap->in_exists = 0;
ap++;
for (++numlevels; i <= NIADDR; i++) {
/* If searching for a meta-data block, quit when found. */
if (metalbn == realbn)
break;
off = (bn / blockcnt) % MNINDIR(ump);
++numlevels;
ap->in_lbn = metalbn;
ap->in_off = off;
ap->in_exists = 0;
++ap;
metalbn -= -1 + off * blockcnt;
blockcnt /= MNINDIR(ump);
}
if (nump)
*nump = numlevels;
return (0);
}