825b49478f
the activate method to the setup_intr, and turn it off to teardown_intr. This makes the ed driver not enter its interrupt routine during the probe. Apparently, an interrupt happens when you disable the interrupts. There are other problems with ed still.
880 lines
21 KiB
C
880 lines
21 KiB
C
/*
|
|
* Intel PCIC or compatible Controller driver
|
|
* May be built to make a loadable module.
|
|
*-------------------------------------------------------------------------
|
|
*
|
|
* Copyright (c) 1995 Andrew McRae. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/select.h>
|
|
|
|
#include <machine/clock.h>
|
|
|
|
#include <pccard/i82365.h>
|
|
#include <pccard/cardinfo.h>
|
|
#include <pccard/driver.h>
|
|
#include <pccard/slot.h>
|
|
#include <pccard/pcic.h>
|
|
|
|
/*
|
|
* Prototypes for interrupt handler.
|
|
*/
|
|
static inthand2_t pcicintr;
|
|
static int pcic_ioctl __P((struct slot *, int, caddr_t));
|
|
static int pcic_power __P((struct slot *));
|
|
static timeout_t pcic_reset;
|
|
static void pcic_resume(struct slot *);
|
|
static void pcic_disable __P((struct slot *));
|
|
static void pcic_mapirq __P((struct slot *, int));
|
|
static timeout_t pcictimeout;
|
|
static struct callout_handle pcictimeout_ch
|
|
= CALLOUT_HANDLE_INITIALIZER(&pcictimeout_ch);
|
|
static int pcic_memory(struct slot *, int);
|
|
static int pcic_io(struct slot *, int);
|
|
|
|
/*
|
|
* Per-slot data table.
|
|
*/
|
|
static struct pcic_slot {
|
|
int slotnum; /* My slot number */
|
|
int index; /* Index register */
|
|
int data; /* Data register */
|
|
int offset; /* Offset value for index */
|
|
char controller; /* Device type */
|
|
char revision; /* Device Revision */
|
|
struct slot *slt; /* Back ptr to slot */
|
|
u_char (*getb)(struct pcic_slot *, int);
|
|
void (*putb)(struct pcic_slot *, int, u_char);
|
|
u_char *regs; /* Pointer to regs in mem */
|
|
} pcic_slots[PCIC_MAX_SLOTS];
|
|
|
|
static int pcic_irq;
|
|
static struct slot_ctrl cinfo;
|
|
|
|
|
|
/*
|
|
* Internal inline functions for accessing the PCIC.
|
|
*/
|
|
/*
|
|
* Read a register from the PCIC.
|
|
*/
|
|
static __inline unsigned char
|
|
getb1(struct pcic_slot *sp, int reg)
|
|
{
|
|
outb(sp->index, sp->offset + reg);
|
|
return inb(sp->data);
|
|
}
|
|
|
|
/*
|
|
* Write a register on the PCIC
|
|
*/
|
|
static __inline void
|
|
putb1(struct pcic_slot *sp, int reg, unsigned char val)
|
|
{
|
|
outb(sp->index, sp->offset + reg);
|
|
outb(sp->data, val);
|
|
}
|
|
|
|
/*
|
|
* Clear bit(s) of a register.
|
|
*/
|
|
static __inline void
|
|
clrb(struct pcic_slot *sp, int reg, unsigned char mask)
|
|
{
|
|
sp->putb(sp, reg, sp->getb(sp, reg) & ~mask);
|
|
}
|
|
|
|
/*
|
|
* Set bit(s) of a register
|
|
*/
|
|
static __inline void
|
|
setb(struct pcic_slot *sp, int reg, unsigned char mask)
|
|
{
|
|
sp->putb(sp, reg, sp->getb(sp, reg) | mask);
|
|
}
|
|
|
|
/*
|
|
* Write a 16 bit value to 2 adjacent PCIC registers
|
|
*/
|
|
static __inline void
|
|
putw(struct pcic_slot *sp, int reg, unsigned short word)
|
|
{
|
|
sp->putb(sp, reg, word & 0xFF);
|
|
sp->putb(sp, reg + 1, (word >> 8) & 0xff);
|
|
}
|
|
|
|
/*
|
|
* entry point from main code to map/unmap memory context.
|
|
*/
|
|
static int
|
|
pcic_memory(struct slot *slt, int win)
|
|
{
|
|
struct pcic_slot *sp = slt->cdata;
|
|
struct mem_desc *mp = &slt->mem[win];
|
|
int reg = mp->window * PCIC_MEMSIZE + PCIC_MEMBASE;
|
|
|
|
if (mp->flags & MDF_ACTIVE) {
|
|
unsigned long sys_addr = (uintptr_t)(void *)mp->start >> 12;
|
|
/*
|
|
* Write the addresses, card offsets and length.
|
|
* The values are all stored as the upper 12 bits of the
|
|
* 24 bit address i.e everything is allocated as 4 Kb chunks.
|
|
*/
|
|
putw(sp, reg, sys_addr & 0xFFF);
|
|
putw(sp, reg+2, (sys_addr + (mp->size >> 12) - 1) & 0xFFF);
|
|
putw(sp, reg+4, ((mp->card >> 12) - sys_addr) & 0x3FFF);
|
|
/*
|
|
* Each 16 bit register has some flags in the upper bits.
|
|
*/
|
|
if (mp->flags & MDF_16BITS)
|
|
setb(sp, reg+1, PCIC_DATA16);
|
|
if (mp->flags & MDF_ZEROWS)
|
|
setb(sp, reg+1, PCIC_ZEROWS);
|
|
if (mp->flags & MDF_WS0)
|
|
setb(sp, reg+3, PCIC_MW0);
|
|
if (mp->flags & MDF_WS1)
|
|
setb(sp, reg+3, PCIC_MW1);
|
|
if (mp->flags & MDF_ATTR)
|
|
setb(sp, reg+5, PCIC_REG);
|
|
if (mp->flags & MDF_WP)
|
|
setb(sp, reg+5, PCIC_WP);
|
|
/*
|
|
* Enable the memory window. By experiment, we need a delay.
|
|
*/
|
|
setb(sp, PCIC_ADDRWINE, (1<<win) | PCIC_MEMCS16);
|
|
DELAY(50);
|
|
} else {
|
|
clrb(sp, PCIC_ADDRWINE, 1<<win);
|
|
putw(sp, reg, 0);
|
|
putw(sp, reg+2, 0);
|
|
putw(sp, reg+4, 0);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* pcic_io - map or unmap I/O context
|
|
*/
|
|
static int
|
|
pcic_io(struct slot *slt, int win)
|
|
{
|
|
int mask, reg;
|
|
struct pcic_slot *sp = slt->cdata;
|
|
struct io_desc *ip = &slt->io[win];
|
|
switch (win) {
|
|
case 0:
|
|
mask = PCIC_IO0_EN;
|
|
reg = PCIC_IO0;
|
|
break;
|
|
case 1:
|
|
mask = PCIC_IO1_EN;
|
|
reg = PCIC_IO1;
|
|
break;
|
|
default:
|
|
panic("Illegal PCIC I/O window request!");
|
|
}
|
|
if (ip->flags & IODF_ACTIVE) {
|
|
unsigned char x, ioctlv;
|
|
|
|
putw(sp, reg, ip->start);
|
|
putw(sp, reg+2, ip->start+ip->size-1);
|
|
x = 0;
|
|
if (ip->flags & IODF_ZEROWS)
|
|
x |= PCIC_IO_0WS;
|
|
if (ip->flags & IODF_WS)
|
|
x |= PCIC_IO_WS;
|
|
if (ip->flags & IODF_CS16)
|
|
x |= PCIC_IO_CS16;
|
|
if (ip->flags & IODF_16BIT)
|
|
x |= PCIC_IO_16BIT;
|
|
/*
|
|
* Extract the current flags and merge with new flags.
|
|
* Flags for window 0 in lower nybble, and in upper nybble
|
|
* for window 1.
|
|
*/
|
|
ioctlv = sp->getb(sp, PCIC_IOCTL);
|
|
DELAY(100);
|
|
switch (win) {
|
|
case 0:
|
|
sp->putb(sp, PCIC_IOCTL, x | (ioctlv & 0xf0));
|
|
break;
|
|
case 1:
|
|
sp->putb(sp, PCIC_IOCTL, (x << 4) | (ioctlv & 0xf));
|
|
break;
|
|
}
|
|
DELAY(100);
|
|
setb(sp, PCIC_ADDRWINE, mask);
|
|
DELAY(100);
|
|
} else {
|
|
clrb(sp, PCIC_ADDRWINE, mask);
|
|
DELAY(100);
|
|
putw(sp, reg, 0);
|
|
putw(sp, reg + 2, 0);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Look for an Intel PCIC (or compatible).
|
|
* For each available slot, allocate a PC-CARD slot.
|
|
*/
|
|
|
|
/*
|
|
* VLSI 82C146 has incompatibilities about the I/O address
|
|
* of slot 1. Assume it's the only PCIC whose vendor ID is 0x84,
|
|
* contact Nate Williams <nate@FreeBSD.org> if incorrect.
|
|
*/
|
|
static int
|
|
pcic_probe(device_t dev)
|
|
{
|
|
int slotnum, validslots = 0;
|
|
struct slot *slt;
|
|
struct pcic_slot *sp;
|
|
unsigned char c;
|
|
void *ih;
|
|
char *name;
|
|
int i;
|
|
int error;
|
|
struct resource *res;
|
|
int rid;
|
|
static int maybe_vlsi = 0;
|
|
|
|
if (device_get_unit(dev) != 0)
|
|
return ENXIO;
|
|
|
|
/*
|
|
* Initialise controller information structure.
|
|
*/
|
|
cinfo.mapmem = pcic_memory;
|
|
cinfo.mapio = pcic_io;
|
|
cinfo.ioctl = pcic_ioctl;
|
|
cinfo.power = pcic_power;
|
|
cinfo.mapirq = pcic_mapirq;
|
|
cinfo.reset = pcic_reset;
|
|
cinfo.disable = pcic_disable;
|
|
cinfo.resume = pcic_resume;
|
|
cinfo.maxmem = PCIC_MEM_WIN;
|
|
cinfo.maxio = PCIC_IO_WIN;
|
|
|
|
sp = pcic_slots;
|
|
for (slotnum = 0; slotnum < PCIC_MAX_SLOTS; slotnum++, sp++) {
|
|
/*
|
|
* Initialise the PCIC slot table.
|
|
*/
|
|
sp->getb = getb1;
|
|
sp->putb = putb1;
|
|
if (slotnum < 4) {
|
|
sp->index = PCIC_INDEX_0;
|
|
sp->data = PCIC_DATA_0;
|
|
sp->offset = slotnum * PCIC_SLOT_SIZE;
|
|
} else {
|
|
sp->index = PCIC_INDEX_1;
|
|
sp->data = PCIC_DATA_1;
|
|
sp->offset = (slotnum - 4) * PCIC_SLOT_SIZE;
|
|
}
|
|
/*
|
|
* XXX - Screwed up slot 1 on the VLSI chips. According to
|
|
* the Linux PCMCIA code from David Hinds, working chipsets
|
|
* return 0x84 from their (correct) ID ports, while the broken
|
|
* ones would need to be probed at the new offset we set after
|
|
* we assume it's broken.
|
|
*/
|
|
if (slotnum == 1 && maybe_vlsi && sp->getb(sp, PCIC_ID_REV) != 0x84) {
|
|
sp->index += 4;
|
|
sp->data += 4;
|
|
sp->offset = PCIC_SLOT_SIZE << 1;
|
|
}
|
|
/*
|
|
* see if there's a PCMCIA controller here
|
|
* Intel PCMCIA controllers use 0x82 and 0x83
|
|
* IBM clone chips use 0x88 and 0x89, apparently
|
|
*/
|
|
c = sp->getb(sp, PCIC_ID_REV);
|
|
sp->revision = -1;
|
|
switch(c) {
|
|
/*
|
|
* 82365 or clones.
|
|
*/
|
|
case 0x82:
|
|
case 0x83:
|
|
sp->controller = PCIC_I82365;
|
|
sp->revision = c & 1;
|
|
/*
|
|
* Now check for VADEM chips.
|
|
*/
|
|
outb(sp->index, 0x0E);
|
|
outb(sp->index, 0x37);
|
|
setb(sp, 0x3A, 0x40);
|
|
c = sp->getb(sp, PCIC_ID_REV);
|
|
if (c & 0x08) {
|
|
switch (sp->revision = c & 7) {
|
|
case 1:
|
|
sp->controller = PCIC_VG365;
|
|
break;
|
|
case 2:
|
|
sp->controller = PCIC_VG465;
|
|
break;
|
|
case 3:
|
|
sp->controller = PCIC_VG468;
|
|
break;
|
|
default:
|
|
sp->controller = PCIC_VG469;
|
|
break;
|
|
}
|
|
clrb(sp, 0x3A, 0x40);
|
|
}
|
|
|
|
/*
|
|
* Check for RICOH RF5C396 PCMCIA Controller
|
|
*/
|
|
c = sp->getb(sp, 0x3a);
|
|
if (c == 0xb2) {
|
|
sp->controller = PCIC_RF5C396;
|
|
}
|
|
|
|
break;
|
|
/*
|
|
* VLSI chips.
|
|
*/
|
|
case 0x84:
|
|
sp->controller = PCIC_VLSI;
|
|
maybe_vlsi = 1;
|
|
break;
|
|
case 0x88:
|
|
case 0x89:
|
|
sp->controller = PCIC_IBM;
|
|
sp->revision = c & 1;
|
|
break;
|
|
case 0x8a:
|
|
sp->controller = PCIC_IBM_KING;
|
|
sp->revision = c & 1;
|
|
break;
|
|
default:
|
|
continue;
|
|
}
|
|
/*
|
|
* Check for Cirrus logic chips.
|
|
*/
|
|
sp->putb(sp, 0x1F, 0);
|
|
c = sp->getb(sp, 0x1F);
|
|
if ((c & 0xC0) == 0xC0) {
|
|
c = sp->getb(sp, 0x1F);
|
|
if ((c & 0xC0) == 0) {
|
|
if (c & 0x20)
|
|
sp->controller = PCIC_PD672X;
|
|
else
|
|
sp->controller = PCIC_PD6710;
|
|
sp->revision = 8 - ((c & 0x1F) >> 2);
|
|
}
|
|
}
|
|
switch(sp->controller) {
|
|
case PCIC_I82365:
|
|
name = "Intel i82365";
|
|
break;
|
|
case PCIC_IBM:
|
|
name = "IBM PCIC";
|
|
break;
|
|
case PCIC_IBM_KING:
|
|
name = "IBM KING PCMCIA Controller";
|
|
break;
|
|
case PCIC_PD672X:
|
|
name = "Cirrus Logic PD672X";
|
|
break;
|
|
case PCIC_PD6710:
|
|
name = "Cirrus Logic PD6710";
|
|
break;
|
|
case PCIC_VG365:
|
|
name = "Vadem 365";
|
|
break;
|
|
case PCIC_VG465:
|
|
name = "Vadem 465";
|
|
break;
|
|
case PCIC_VG468:
|
|
name = "Vadem 468";
|
|
break;
|
|
case PCIC_VG469:
|
|
name = "Vadem 469";
|
|
break;
|
|
case PCIC_RF5C396:
|
|
name = "Ricoh RF5C396";
|
|
break;
|
|
case PCIC_VLSI:
|
|
name = "VLSI 82C146";
|
|
break;
|
|
default:
|
|
name = "Unknown!";
|
|
break;
|
|
}
|
|
device_set_desc(dev, name);
|
|
/*
|
|
* OK it seems we have a PCIC or lookalike.
|
|
* Allocate a slot and initialise the data structures.
|
|
*/
|
|
validslots++;
|
|
sp->slotnum = slotnum;
|
|
slt = pccard_alloc_slot(&cinfo);
|
|
if (slt == 0)
|
|
continue;
|
|
slt->cdata = sp;
|
|
sp->slt = slt;
|
|
/*
|
|
* If we haven't allocated an interrupt for the controller,
|
|
* then attempt to get one.
|
|
*/
|
|
if (pcic_irq == 0) {
|
|
/* See if the user has requested a specific IRQ */
|
|
if (!getenv_int("machdep.pccard.pcic_irq", &pcic_irq))
|
|
pcic_irq = 0;
|
|
rid = 0;
|
|
res = bus_alloc_resource(dev, SYS_RES_IRQ,
|
|
&rid, pcic_irq, ~0, 1, RF_ACTIVE);
|
|
if (res) {
|
|
error = bus_setup_intr(dev, res,
|
|
INTR_TYPE_MISC, pcicintr, NULL, &ih);
|
|
if (error) {
|
|
bus_release_resource(dev, SYS_RES_IRQ,
|
|
rid, res);
|
|
return error;
|
|
}
|
|
pcic_irq = rman_get_start(res);
|
|
} else {
|
|
printf("pcic: polling, can't alloc %d\n",
|
|
pcic_irq);
|
|
}
|
|
}
|
|
/*
|
|
* Modem cards send the speaker audio (dialing noises)
|
|
* to the host's speaker. Cirrus Logic PCIC chips must
|
|
* enable this. There is also a Low Power Dynamic Mode bit
|
|
* that claims to reduce power consumption by 30%, so
|
|
* enable it and hope for the best.
|
|
*/
|
|
if (sp->controller == PCIC_PD672X) {
|
|
setb(sp, PCIC_MISC1, PCIC_SPKR_EN);
|
|
setb(sp, PCIC_MISC2, PCIC_LPDM_EN);
|
|
}
|
|
/*
|
|
* Check for a card in this slot.
|
|
*/
|
|
setb(sp, PCIC_POWER, PCIC_PCPWRE| PCIC_DISRST);
|
|
if ((sp->getb(sp, PCIC_STATUS) & PCIC_CD) != PCIC_CD) {
|
|
slt->laststate = slt->state = empty;
|
|
} else {
|
|
slt->laststate = slt->state = filled;
|
|
pccard_event(sp->slt, card_inserted);
|
|
}
|
|
/*
|
|
* Assign IRQ for slot changes
|
|
*/
|
|
if (pcic_irq > 0)
|
|
sp->putb(sp, PCIC_STAT_INT, (pcic_irq << 4) | 0xF);
|
|
}
|
|
if (validslots && pcic_irq <= 0)
|
|
pcictimeout_ch = timeout(pcictimeout, 0, hz/2);
|
|
if (validslots) {
|
|
for (i = 0; i < validslots; i++) {
|
|
device_add_child(dev, NULL, -1);
|
|
}
|
|
}
|
|
return(validslots ? 0 : ENXIO);
|
|
}
|
|
|
|
/*
|
|
* ioctl calls - Controller specific ioctls
|
|
*/
|
|
static int
|
|
pcic_ioctl(struct slot *slt, int cmd, caddr_t data)
|
|
{
|
|
struct pcic_slot *sp = slt->cdata;
|
|
|
|
switch(cmd) {
|
|
default:
|
|
return(ENOTTY);
|
|
/*
|
|
* Get/set PCIC registers
|
|
*/
|
|
case PIOCGREG:
|
|
((struct pcic_reg *)data)->value =
|
|
sp->getb(sp, ((struct pcic_reg *)data)->reg);
|
|
break;
|
|
case PIOCSREG:
|
|
sp->putb(sp, ((struct pcic_reg *)data)->reg,
|
|
((struct pcic_reg *)data)->value);
|
|
break;
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* pcic_power - Enable the power of the slot according to
|
|
* the parameters in the power structure(s).
|
|
*/
|
|
static int
|
|
pcic_power(struct slot *slt)
|
|
{
|
|
unsigned char reg = PCIC_DISRST|PCIC_PCPWRE;
|
|
struct pcic_slot *sp = slt->cdata;
|
|
|
|
switch(sp->controller) {
|
|
case PCIC_PD672X:
|
|
case PCIC_PD6710:
|
|
case PCIC_VG365:
|
|
case PCIC_VG465:
|
|
case PCIC_VG468:
|
|
case PCIC_VG469:
|
|
case PCIC_RF5C396:
|
|
case PCIC_VLSI:
|
|
case PCIC_IBM_KING:
|
|
switch(slt->pwr.vpp) {
|
|
default:
|
|
return(EINVAL);
|
|
case 0:
|
|
break;
|
|
case 50:
|
|
case 33:
|
|
reg |= PCIC_VPP_5V;
|
|
break;
|
|
case 120:
|
|
reg |= PCIC_VPP_12V;
|
|
break;
|
|
}
|
|
switch(slt->pwr.vcc) {
|
|
default:
|
|
return(EINVAL);
|
|
case 0:
|
|
break;
|
|
case 33:
|
|
if (sp->controller == PCIC_IBM_KING) {
|
|
reg |= PCIC_VCC_5V_KING;
|
|
break;
|
|
}
|
|
reg |= PCIC_VCC_3V;
|
|
if ((sp->controller == PCIC_VG468) ||
|
|
(sp->controller == PCIC_VG469) ||
|
|
(sp->controller == PCIC_VG465) ||
|
|
(sp->controller == PCIC_VG365))
|
|
setb(sp, 0x2f, 0x03) ;
|
|
else
|
|
setb(sp, 0x16, 0x02);
|
|
break;
|
|
case 50:
|
|
if (sp->controller == PCIC_IBM_KING) {
|
|
reg |= PCIC_VCC_5V_KING;
|
|
break;
|
|
}
|
|
reg |= PCIC_VCC_5V;
|
|
if ((sp->controller == PCIC_VG468) ||
|
|
(sp->controller == PCIC_VG469) ||
|
|
(sp->controller == PCIC_VG465) ||
|
|
(sp->controller == PCIC_VG365))
|
|
clrb(sp, 0x2f, 0x03) ;
|
|
else
|
|
clrb(sp, 0x16, 0x02);
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
sp->putb(sp, PCIC_POWER, reg);
|
|
DELAY(300*1000);
|
|
if (slt->pwr.vcc) {
|
|
reg |= PCIC_OUTENA;
|
|
sp->putb(sp, PCIC_POWER, reg);
|
|
DELAY(100*1000);
|
|
}
|
|
/* Some chips are smarter than us it seems, so if we weren't
|
|
* allowed to use 5V, try 3.3 instead
|
|
*/
|
|
if (!(sp->getb(sp, PCIC_STATUS) & 0x40) && slt->pwr.vcc == 50) {
|
|
slt->pwr.vcc = 33;
|
|
slt->pwr.vpp = 0;
|
|
return (pcic_power(slt));
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* tell the PCIC which irq we want to use. only the following are legal:
|
|
* 3, 4, 5, 7, 9, 10, 11, 12, 14, 15
|
|
*/
|
|
static void
|
|
pcic_mapirq(struct slot *slt, int irq)
|
|
{
|
|
struct pcic_slot *sp = slt->cdata;
|
|
if (irq == 0)
|
|
clrb(sp, PCIC_INT_GEN, 0xF);
|
|
else
|
|
sp->putb(sp, PCIC_INT_GEN,
|
|
(sp->getb(sp, PCIC_INT_GEN) & 0xF0) | irq);
|
|
}
|
|
|
|
/*
|
|
* pcic_reset - Reset the card and enable initial power.
|
|
*/
|
|
static void
|
|
pcic_reset(void *chan)
|
|
{
|
|
struct slot *slt = chan;
|
|
struct pcic_slot *sp = slt->cdata;
|
|
|
|
switch (slt->insert_seq) {
|
|
case 0: /* Something funny happended on the way to the pub... */
|
|
return;
|
|
case 1: /* Assert reset */
|
|
clrb(sp, PCIC_INT_GEN, PCIC_CARDRESET);
|
|
slt->insert_seq = 2;
|
|
timeout(pcic_reset, (void *)slt, hz/4);
|
|
return;
|
|
case 2: /* Deassert it again */
|
|
setb(sp, PCIC_INT_GEN, PCIC_CARDRESET|PCIC_IOCARD);
|
|
slt->insert_seq = 3;
|
|
timeout(pcic_reset, (void *)slt, hz/4);
|
|
return;
|
|
case 3: /* Wait if card needs more time */
|
|
if (!sp->getb(sp, PCIC_STATUS) & PCIC_READY) {
|
|
timeout(pcic_reset, (void *)slt, hz/10);
|
|
return;
|
|
}
|
|
}
|
|
slt->insert_seq = 0;
|
|
if (sp->controller == PCIC_PD672X || sp->controller == PCIC_PD6710) {
|
|
sp->putb(sp, PCIC_TIME_SETUP0, 0x1);
|
|
sp->putb(sp, PCIC_TIME_CMD0, 0x6);
|
|
sp->putb(sp, PCIC_TIME_RECOV0, 0x0);
|
|
sp->putb(sp, PCIC_TIME_SETUP1, 1);
|
|
sp->putb(sp, PCIC_TIME_CMD1, 0xf);
|
|
sp->putb(sp, PCIC_TIME_RECOV1, 0);
|
|
}
|
|
selwakeup(&slt->selp);
|
|
}
|
|
|
|
/*
|
|
* pcic_disable - Disable the slot.
|
|
*/
|
|
static void
|
|
pcic_disable(struct slot *slt)
|
|
{
|
|
struct pcic_slot *sp = slt->cdata;
|
|
|
|
sp->putb(sp, PCIC_INT_GEN, 0);
|
|
sp->putb(sp, PCIC_POWER, 0);
|
|
}
|
|
|
|
/*
|
|
* PCIC timer. If the controller doesn't have a free IRQ to use
|
|
* or if interrupt steering doesn't work, poll the controller for
|
|
* insertion/removal events.
|
|
*/
|
|
static void
|
|
pcictimeout(void *chan)
|
|
{
|
|
pcicintr(0);
|
|
pcictimeout_ch = timeout(pcictimeout, 0, hz/2);
|
|
}
|
|
|
|
/*
|
|
* PCIC Interrupt handler.
|
|
* Check each slot in turn, and read the card status change
|
|
* register. If this is non-zero, then a change has occurred
|
|
* on this card, so send an event to the main code.
|
|
*/
|
|
static void
|
|
pcicintr(void *arg)
|
|
{
|
|
int slot, s;
|
|
unsigned char chg;
|
|
struct pcic_slot *sp = pcic_slots;
|
|
|
|
s = splhigh();
|
|
for (slot = 0; slot < PCIC_MAX_SLOTS; slot++, sp++) {
|
|
if (sp->slt && (chg = sp->getb(sp, PCIC_STAT_CHG)) != 0) {
|
|
if (chg & PCIC_CDTCH) {
|
|
if ((sp->getb(sp, PCIC_STATUS) & PCIC_CD) ==
|
|
PCIC_CD) {
|
|
pccard_event(sp->slt, card_inserted);
|
|
} else {
|
|
pccard_event(sp->slt, card_removed);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* pcic_resume - Suspend/resume support for PCIC
|
|
*/
|
|
static void
|
|
pcic_resume(struct slot *slt)
|
|
{
|
|
struct pcic_slot *sp = slt->cdata;
|
|
|
|
if (pcic_irq > 0)
|
|
sp->putb(sp, PCIC_STAT_INT, (pcic_irq << 4) | 0xF);
|
|
if (sp->controller == PCIC_PD672X) {
|
|
setb(sp, PCIC_MISC1, PCIC_SPKR_EN);
|
|
setb(sp, PCIC_MISC2, PCIC_LPDM_EN);
|
|
}
|
|
}
|
|
|
|
static int
|
|
pcic_activate_resource(device_t dev, device_t child, int type, int rid,
|
|
struct resource *r)
|
|
{
|
|
struct pccard_devinfo *devi = device_get_ivars(child);
|
|
int err;
|
|
|
|
switch (type) {
|
|
case SYS_RES_IOPORT:
|
|
{
|
|
struct io_desc *ip = &devi->slt->io[rid];
|
|
ip->flags |= IODF_ACTIVE;
|
|
ip->start = rman_get_start(r);
|
|
ip->size = rman_get_end(r) - rman_get_start(r) + 1;
|
|
err = pcic_io(devi->slt, rid);
|
|
if (err)
|
|
return err;
|
|
break;
|
|
}
|
|
case SYS_RES_IRQ:
|
|
break;
|
|
case SYS_RES_MEMORY:
|
|
{
|
|
struct mem_desc *mp = &devi->slt->mem[rid];
|
|
mp->flags |= IODF_ACTIVE;
|
|
mp->start = (caddr_t) rman_get_start(r);
|
|
mp->size = rman_get_end(r) - rman_get_start(r) + 1;
|
|
err = pcic_memory(devi->slt, rid);
|
|
if (err)
|
|
return err;
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
err = bus_generic_activate_resource(dev, child, type, rid, r);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
pcic_deactivate_resource(device_t dev, device_t child, int type, int rid,
|
|
struct resource *r)
|
|
{
|
|
struct pccard_devinfo *devi = device_get_ivars(child);
|
|
int err;
|
|
|
|
switch (type) {
|
|
case SYS_RES_IOPORT:
|
|
{
|
|
struct io_desc *ip = &devi->slt->io[rid];
|
|
ip->flags &= ~IODF_ACTIVE;
|
|
err = pcic_io(devi->slt, rid);
|
|
if (err) {
|
|
return err;
|
|
}
|
|
break;
|
|
}
|
|
case SYS_RES_IRQ:
|
|
break;
|
|
case SYS_RES_MEMORY:
|
|
{
|
|
struct mem_desc *mp = &devi->slt->mem[rid];
|
|
mp->flags &= ~IODF_ACTIVE;
|
|
err = pcic_memory(devi->slt, rid);
|
|
if (err) {
|
|
return err;
|
|
}
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
err = bus_generic_deactivate_resource(dev, child, type, rid, r);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
pcic_setup_intr(device_t dev, device_t child, struct resource *irq,
|
|
int flags, driver_intr_t *intr, void *arg, void **cookiep)
|
|
{
|
|
struct pccard_devinfo *devi = device_get_ivars(child);
|
|
int err;
|
|
|
|
err = bus_generic_setup_intr(dev, child, irq, flags, intr, arg,
|
|
cookiep);
|
|
if (err == 0)
|
|
pcic_mapirq(devi->slt, rman_get_start(irq));
|
|
else
|
|
device_printf(dev, "Error %d irq %ld\n", err,
|
|
rman_get_start(irq));
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
pcic_teardown_intr(device_t dev, device_t child, struct resource *irq,
|
|
void *cookie)
|
|
{
|
|
struct pccard_devinfo *devi = device_get_ivars(child);
|
|
|
|
pcic_mapirq(devi->slt, 0);
|
|
return (bus_generic_teardown_intr(dev, child, irq, cookie));
|
|
}
|
|
|
|
static device_method_t pcic_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, pcic_probe),
|
|
DEVMETHOD(device_attach, bus_generic_attach),
|
|
DEVMETHOD(device_detach, bus_generic_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_alloc_resource, bus_generic_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
|
|
DEVMETHOD(bus_activate_resource, pcic_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, pcic_deactivate_resource),
|
|
DEVMETHOD(bus_setup_intr, pcic_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, pcic_teardown_intr),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
devclass_t pcic_devclass;
|
|
|
|
static driver_t pcic_driver = {
|
|
"pcic",
|
|
pcic_methods,
|
|
1, /* no softc */
|
|
};
|
|
|
|
DRIVER_MODULE(pcic, isa, pcic_driver, pcic_devclass, 0, 0);
|