19d8ec29e2
other device attributes stored in the CAM Existing Device Table (EDT). This includes some infrastructure requried by the enclosure services driver to export physical path information. Make the CAM device advanced info interface accept store requests. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: - Replace scsi_get_sas_addr() with a scsi_get_devid() which takes a callback that decides whether to accept a particular descriptor. Provide callbacks for NAA IEEE Registered addresses and for SAS addresses, replacing the old function. This is needed because the old function doesn't work for an enclosure address for a SAS device, which is not flagged as a SAS address, but is NAA IEEE Registered. It may be worthwhile merging this interface with the devid match interface. - Add a few more defines for some device ID fields. sbin/camcontrol/camcontrol.c: - Update for the CCB_DEV_ADVINFO interface change. cam/cam_xpt_internal.h: - Add the new fields for the physical path string to the CAM EDT. cam/cam_ccb.h: - Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb structure to ccb_dev_advinfo. - Add a flag that changes this CCB's action to store, rather than the default, retrieve. - Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT physpath field. - Remove the never-implemented transport & proto flags. cam/cam_xpt.c: cam/cam_xpt.h: - Add xpt_getattr(), which provides a wrapper for fetching a device's attribute using the GEOM strings as key. This method currently supports "GEOM::ident" and "GEOM::physpath". Submitted by: will Reviewed by : gibbs Extend the XPT_DEV_MATCH api to allow a device search by device ID. As far as the API is concerned, device ID is a binary blob to be interpreted by the transport layer. The SCSI implementation assumes it is an array of VPD device ID descriptors. sys/cam/cam_ccb.h: Create a new structure, device_id_match_pattern, and update the XPT_DEV_MATCH datastructures and flags so that this pattern type can be used. sys/cam/cam_xpt.c: - A single pattern matching on both inquiry data and device ID is invalid. Report any violators. - Pass device ID match requests through to the new routine scsi_devid_match(). The direct call of a SCSI routine is a layering violation, but no worse than the one a few lines up that checks inquiry data. Defer cleaning this up until our future, larger, rototilling of CAM. - Zero out cam_ed and cam_et nodes on allocation. Prior to this change, device_id_len and device_id were not inialized, preventing proper detection of the presence of this information. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add the scsi_match_devid() routine. Add a helper function for extracting peripherial driver names sys/cam/cam_periph.c: sys/cam/cam_periph.h: Add the cam_periph_list() method which fills an sbuf with a comma delimited list of the peripheral instances associated with a given CAM path. Add a helper functions for SCSI commands used by the SES driver. sys/cam/scsi/scsi_all.c: sys/cam/scsi/scsi_all.h: Add structure definitions and csio filling functions for the receive diagnostic results and send diagnostic commands. Misc CAM XPT cleanups. sys/cam/cam_xpt.c: Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED events at the time async event handlers are attached even when registering just for events on a partitular SIM. Previously, you had to register for these events on all SIMs in the system in order to get the initial broadcast even though subsequent device and path arrivals would be delivered. sys/cam/cam_xpt.c: Remove SIM mutex held asserts from path accessors. CAM paths are reference counted and it is this reference count, not the sim mutex, that garantees they are stable. Sponsored by: Spectra Logic Corporation
142 lines
5.1 KiB
C
142 lines
5.1 KiB
C
/*-
|
|
* Data structures and definitions for dealing with the
|
|
* Common Access Method Transport (xpt) layer.
|
|
*
|
|
* Copyright (c) 1997 Justin T. Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _CAM_CAM_XPT_H
|
|
#define _CAM_CAM_XPT_H 1
|
|
|
|
/* Forward Declarations */
|
|
union ccb;
|
|
struct cam_periph;
|
|
struct cam_sim;
|
|
|
|
/*
|
|
* Definition of a CAM path. Paths are created from bus, target, and lun ids
|
|
* via xpt_create_path and allow for reference to devices without recurring
|
|
* lookups in the edt.
|
|
*/
|
|
struct cam_path;
|
|
|
|
/* Path functions */
|
|
|
|
#ifdef _KERNEL
|
|
|
|
/*
|
|
* Definition of an async handler callback block. These are used to add
|
|
* SIMs and peripherals to the async callback lists.
|
|
*/
|
|
struct async_node {
|
|
SLIST_ENTRY(async_node) links;
|
|
u_int32_t event_enable; /* Async Event enables */
|
|
void (*callback)(void *arg, u_int32_t code,
|
|
struct cam_path *path, void *args);
|
|
void *callback_arg;
|
|
};
|
|
|
|
SLIST_HEAD(async_list, async_node);
|
|
SLIST_HEAD(periph_list, cam_periph);
|
|
|
|
#if defined(CAM_DEBUG_FLAGS) && !defined(CAMDEBUG)
|
|
#error "You must have options CAMDEBUG to use options CAM_DEBUG_FLAGS"
|
|
#endif
|
|
|
|
/*
|
|
* In order to enable the CAM_DEBUG_* options, the user must have CAMDEBUG
|
|
* enabled. Also, the user must have either none, or all of CAM_DEBUG_BUS,
|
|
* CAM_DEBUG_TARGET, and CAM_DEBUG_LUN specified.
|
|
*/
|
|
#if defined(CAM_DEBUG_BUS) || defined(CAM_DEBUG_TARGET) \
|
|
|| defined(CAM_DEBUG_LUN)
|
|
#ifdef CAMDEBUG
|
|
#if !defined(CAM_DEBUG_BUS) || !defined(CAM_DEBUG_TARGET) \
|
|
|| !defined(CAM_DEBUG_LUN)
|
|
#error "You must define all or none of CAM_DEBUG_BUS, CAM_DEBUG_TARGET \
|
|
and CAM_DEBUG_LUN"
|
|
#endif /* !CAM_DEBUG_BUS || !CAM_DEBUG_TARGET || !CAM_DEBUG_LUN */
|
|
#else /* !CAMDEBUG */
|
|
#error "You must use options CAMDEBUG if you use the CAM_DEBUG_* options"
|
|
#endif /* CAMDEBUG */
|
|
#endif /* CAM_DEBUG_BUS || CAM_DEBUG_TARGET || CAM_DEBUG_LUN */
|
|
|
|
void xpt_action(union ccb *new_ccb);
|
|
void xpt_action_default(union ccb *new_ccb);
|
|
union ccb *xpt_alloc_ccb(void);
|
|
union ccb *xpt_alloc_ccb_nowait(void);
|
|
void xpt_free_ccb(union ccb *free_ccb);
|
|
void xpt_setup_ccb(struct ccb_hdr *ccb_h,
|
|
struct cam_path *path,
|
|
u_int32_t priority);
|
|
void xpt_merge_ccb(union ccb *master_ccb,
|
|
union ccb *slave_ccb);
|
|
cam_status xpt_create_path(struct cam_path **new_path_ptr,
|
|
struct cam_periph *perph,
|
|
path_id_t path_id,
|
|
target_id_t target_id, lun_id_t lun_id);
|
|
cam_status xpt_create_path_unlocked(struct cam_path **new_path_ptr,
|
|
struct cam_periph *perph,
|
|
path_id_t path_id,
|
|
target_id_t target_id, lun_id_t lun_id);
|
|
int xpt_getattr(char *buf, size_t len, const char *attr,
|
|
struct cam_path *path);
|
|
void xpt_free_path(struct cam_path *path);
|
|
int xpt_path_comp(struct cam_path *path1,
|
|
struct cam_path *path2);
|
|
void xpt_print_path(struct cam_path *path);
|
|
void xpt_print(struct cam_path *path, const char *fmt, ...);
|
|
int xpt_path_string(struct cam_path *path, char *str,
|
|
size_t str_len);
|
|
path_id_t xpt_path_path_id(struct cam_path *path);
|
|
target_id_t xpt_path_target_id(struct cam_path *path);
|
|
lun_id_t xpt_path_lun_id(struct cam_path *path);
|
|
int xpt_path_legacy_ata_id(struct cam_path *path);
|
|
struct cam_sim *xpt_path_sim(struct cam_path *path);
|
|
struct cam_periph *xpt_path_periph(struct cam_path *path);
|
|
void xpt_async(u_int32_t async_code, struct cam_path *path,
|
|
void *async_arg);
|
|
void xpt_rescan(union ccb *ccb);
|
|
void xpt_hold_boot(void);
|
|
void xpt_release_boot(void);
|
|
void xpt_lock_buses(void);
|
|
void xpt_unlock_buses(void);
|
|
cam_status xpt_register_async(int event, ac_callback_t *cbfunc,
|
|
void *cbarg, struct cam_path *path);
|
|
cam_status xpt_compile_path(struct cam_path *new_path,
|
|
struct cam_periph *perph,
|
|
path_id_t path_id,
|
|
target_id_t target_id,
|
|
lun_id_t lun_id);
|
|
|
|
void xpt_release_path(struct cam_path *path);
|
|
|
|
#endif /* _KERNEL */
|
|
|
|
#endif /* _CAM_CAM_XPT_H */
|
|
|