freebsd-skq/sys/dev/ppbus/ppbconf.c
Nicolas Souchu 0f210c922b Port of ppbus standalone framework to the newbus system.
Note1: the correct interrupt level is invoked correctly for each driver.
       For this purpose, drivers request the bus before being able to
       call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus
       core when drivers release it. Thus, when BUS_SETUP_INTR is called
       at ppbus driver level, ppbus checks that the caller owns the
       bus and stores the interrupt handler cookie (in order to unregister
       it later).

       Printing is impossible while plip link is up is still TRUE.
       vpo (ZIP driver) and lpt are make in such a way that
       using the ZIP and printing concurrently is permitted is also TRUE.

Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET
       is now needed to force chipset detection. If set, the flags 0x40
       still avoid detection at boot.

Port of the pcf(4) driver to the newbus system (was previously directly
connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00

605 lines
14 KiB
C

/*-
* Copyright (c) 1997, 1998, 1999 Nicolas Souchu
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*
*/
#include "opt_ppb_1284.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <dev/ppbus/ppbconf.h>
#include <dev/ppbus/ppb_1284.h>
#include "ppbus_if.h"
#define DEVTOSOFTC(dev) ((struct ppb_data *)device_get_softc(dev))
MALLOC_DEFINE(M_PPBUSDEV, "ppbusdev", "Parallel Port bus device");
static devclass_t ppbus_devclass;
/*
* Device methods
*/
static int ppbus_probe(device_t);
static int ppbus_attach(device_t);
static void ppbus_print_child(device_t bus, device_t dev);
static int ppbus_read_ivar(device_t, device_t, int, uintptr_t *);
static int ppbus_write_ivar(device_t, device_t, int, u_long);
static int ppbus_setup_intr(device_t, device_t, struct resource *, int,
void (*)(void *), void *, void **);
static int ppbus_teardown_intr(device_t, device_t, struct resource *, void *);
static device_method_t ppbus_methods[] = {
/* device interface */
DEVMETHOD(device_probe, ppbus_probe),
DEVMETHOD(device_attach, ppbus_attach),
/* bus interface */
DEVMETHOD(bus_print_child, ppbus_print_child),
DEVMETHOD(bus_read_ivar, ppbus_read_ivar),
DEVMETHOD(bus_write_ivar, ppbus_write_ivar),
DEVMETHOD(bus_setup_intr, ppbus_setup_intr),
DEVMETHOD(bus_teardown_intr, ppbus_teardown_intr),
DEVMETHOD(bus_alloc_resource, bus_generic_alloc_resource),
{ 0, 0 }
};
static driver_t ppbus_driver = {
"ppbus",
ppbus_methods,
sizeof(struct ppb_data),
};
static void
ppbus_print_child(device_t bus, device_t dev)
{
struct ppb_device *ppbdev;
bus_print_child_header(bus, dev);
ppbdev = (struct ppb_device *)device_get_ivars(dev);
if (ppbdev->flags != 0)
printf(" flags 0x%x", ppbdev->flags);
printf(" on %s%d\n", device_get_name(bus), device_get_unit(bus));
return;
}
static int
ppbus_probe(device_t dev)
{
device_set_desc(dev, "Parallel port bus");
return (0);
}
/*
* ppb_add_device()
*
* Add a ppbus device, allocate/initialize the ivars
*/
static void
ppbus_add_device(device_t dev, const char *name, int unit)
{
struct ppb_device *ppbdev;
device_t child;
/* allocate ivars for the new ppbus child */
ppbdev = malloc(sizeof(struct ppb_device), M_PPBUSDEV, M_NOWAIT);
if (!ppbdev)
return;
bzero(ppbdev, sizeof *ppbdev);
/* initialize the ivars */
ppbdev->name = name;
/* add the device as a child to the ppbus bus with the allocated
* ivars */
child = device_add_child(dev, name, unit);
device_set_ivars(child, ppbdev);
return;
}
static int
ppbus_read_ivar(device_t bus, device_t dev, int index, uintptr_t* val)
{
struct ppb_device *ppbdev = (struct ppb_device *)device_get_ivars(dev);
switch (index) {
case PPBUS_IVAR_MODE:
/* XXX yet device mode = ppbus mode = chipset mode */
*val = (u_long)ppb_get_mode(bus);
ppbdev->mode = (u_short)*val;
break;
case PPBUS_IVAR_AVM:
*val = (u_long)ppbdev->avm;
break;
case PPBUS_IVAR_IRQ:
BUS_READ_IVAR(device_get_parent(bus), bus, PPC_IVAR_IRQ, val);
break;
default:
return (ENOENT);
}
return (0);
}
static int
ppbus_write_ivar(device_t bus, device_t dev, int index, u_long val)
{
struct ppb_device *ppbdev = (struct ppb_device *)device_get_ivars(dev);
switch (index) {
case PPBUS_IVAR_MODE:
/* XXX yet device mode = ppbus mode = chipset mode */
ppb_set_mode(bus,val);
ppbdev->mode = ppb_get_mode(bus);
break;
default:
return (ENOENT);
}
return (0);
}
#define PPB_PNP_PRINTER 0
#define PPB_PNP_MODEM 1
#define PPB_PNP_NET 2
#define PPB_PNP_HDC 3
#define PPB_PNP_PCMCIA 4
#define PPB_PNP_MEDIA 5
#define PPB_PNP_FDC 6
#define PPB_PNP_PORTS 7
#define PPB_PNP_SCANNER 8
#define PPB_PNP_DIGICAM 9
#ifndef DONTPROBE_1284
static char *pnp_tokens[] = {
"PRINTER", "MODEM", "NET", "HDC", "PCMCIA", "MEDIA",
"FDC", "PORTS", "SCANNER", "DIGICAM", "", NULL };
#if 0
static char *pnp_classes[] = {
"printer", "modem", "network device",
"hard disk", "PCMCIA", "multimedia device",
"floppy disk", "ports", "scanner",
"digital camera", "unknown device", NULL };
#endif
/*
* search_token()
*
* Search the first occurence of a token within a string
*
* XXX should use strxxx() calls
*/
static char *
search_token(char *str, int slen, char *token)
{
char *p;
int tlen, i, j;
#define UNKNOWN_LENGTH -1
if (slen == UNKNOWN_LENGTH)
/* get string's length */
for (slen = 0, p = str; *p != '\0'; p++)
slen ++;
/* get token's length */
for (tlen = 0, p = token; *p != '\0'; p++)
tlen ++;
if (tlen == 0)
return (str);
for (i = 0; i <= slen-tlen; i++) {
for (j = 0; j < tlen; j++)
if (str[i+j] != token[j])
break;
if (j == tlen)
return (&str[i]);
}
return (NULL);
}
/*
* ppb_pnp_detect()
*
* Returns the class id. of the peripherial, -1 otherwise
*/
static int
ppb_pnp_detect(device_t bus)
{
char *token, *class = 0;
int i, len, error;
int class_id = -1;
char str[PPB_PnP_STRING_SIZE+1];
int unit = device_get_unit(bus);
printf("Probing for PnP devices on ppbus%d:\n", unit);
if ((error = ppb_1284_read_id(bus, PPB_NIBBLE, str,
PPB_PnP_STRING_SIZE, &len)))
goto end_detect;
#ifdef DEBUG_1284
printf("ppb: <PnP> %d characters: ", len);
for (i = 0; i < len; i++)
printf("%c(0x%x) ", str[i], str[i]);
printf("\n");
#endif
/* replace ';' characters by '\0' */
for (i = 0; i < len; i++)
str[i] = (str[i] == ';') ? '\0' : str[i];
if ((token = search_token(str, len, "MFG")) != NULL ||
(token = search_token(str, len, "MANUFACTURER")) != NULL)
printf("ppbus%d: <%s", unit,
search_token(token, UNKNOWN_LENGTH, ":") + 1);
else
printf("ppbus%d: <unknown", unit);
if ((token = search_token(str, len, "MDL")) != NULL ||
(token = search_token(str, len, "MODEL")) != NULL)
printf(" %s",
search_token(token, UNKNOWN_LENGTH, ":") + 1);
else
printf(" unknown");
if ((token = search_token(str, len, "VER")) != NULL)
printf("/%s",
search_token(token, UNKNOWN_LENGTH, ":") + 1);
if ((token = search_token(str, len, "REV")) != NULL)
printf(".%s",
search_token(token, UNKNOWN_LENGTH, ":") + 1);
printf(">");
if ((token = search_token(str, len, "CLS")) != NULL) {
class = search_token(token, UNKNOWN_LENGTH, ":") + 1;
printf(" %s", class);
}
if ((token = search_token(str, len, "CMD")) != NULL ||
(token = search_token(str, len, "COMMAND")) != NULL)
printf(" %s",
search_token(token, UNKNOWN_LENGTH, ":") + 1);
printf("\n");
if (class)
/* identify class ident */
for (i = 0; pnp_tokens[i] != NULL; i++) {
if (search_token(class, len, pnp_tokens[i]) != NULL) {
class_id = i;
goto end_detect;
}
}
class_id = PPB_PnP_UNKNOWN;
end_detect:
return (class_id);
}
/*
* ppb_scan_bus()
*
* Scan the ppbus for IEEE1284 compliant devices
*/
static int
ppb_scan_bus(device_t bus)
{
struct ppb_data * ppb = (struct ppb_data *)device_get_softc(bus);
int error = 0;
int unit = device_get_unit(bus);
/* try all IEEE1284 modes, for one device only
*
* XXX We should implement the IEEE1284.3 standard to detect
* daisy chained devices
*/
error = ppb_1284_negociate(bus, PPB_NIBBLE, PPB_REQUEST_ID);
if ((ppb->state == PPB_ERROR) && (ppb->error == PPB_NOT_IEEE1284))
goto end_scan;
ppb_1284_terminate(bus);
printf("ppbus%d: IEEE1284 device found ", unit);
if (!(error = ppb_1284_negociate(bus, PPB_NIBBLE, 0))) {
printf("/NIBBLE");
ppb_1284_terminate(bus);
}
if (!(error = ppb_1284_negociate(bus, PPB_PS2, 0))) {
printf("/PS2");
ppb_1284_terminate(bus);
}
if (!(error = ppb_1284_negociate(bus, PPB_ECP, 0))) {
printf("/ECP");
ppb_1284_terminate(bus);
}
if (!(error = ppb_1284_negociate(bus, PPB_ECP, PPB_USE_RLE))) {
printf("/ECP_RLE");
ppb_1284_terminate(bus);
}
if (!(error = ppb_1284_negociate(bus, PPB_EPP, 0))) {
printf("/EPP");
ppb_1284_terminate(bus);
}
/* try more IEEE1284 modes */
if (bootverbose) {
if (!(error = ppb_1284_negociate(bus, PPB_NIBBLE,
PPB_REQUEST_ID))) {
printf("/NIBBLE_ID");
ppb_1284_terminate(bus);
}
if (!(error = ppb_1284_negociate(bus, PPB_PS2,
PPB_REQUEST_ID))) {
printf("/PS2_ID");
ppb_1284_terminate(bus);
}
if (!(error = ppb_1284_negociate(bus, PPB_ECP,
PPB_REQUEST_ID))) {
printf("/ECP_ID");
ppb_1284_terminate(bus);
}
if (!(error = ppb_1284_negociate(bus, PPB_ECP,
PPB_REQUEST_ID | PPB_USE_RLE))) {
printf("/ECP_RLE_ID");
ppb_1284_terminate(bus);
}
if (!(error = ppb_1284_negociate(bus, PPB_COMPATIBLE,
PPB_EXTENSIBILITY_LINK))) {
printf("/Extensibility Link");
ppb_1284_terminate(bus);
}
}
printf("\n");
/* detect PnP devices */
ppb->class_id = ppb_pnp_detect(bus);
return (0);
end_scan:
return (error);
}
#endif /* !DONTPROBE_1284 */
static int
ppbus_attach(device_t dev)
{
int i;
int unit, disabled;
char *name;
/*
* Add all devices configured to be attached to ppbus0.
*/
for (i = resource_query_string(-1, "at", "ppbus0");
i != -1;
i = resource_query_string(i, "at", "ppbus0")) {
unit = resource_query_unit(i);
name = resource_query_name(i);
if (resource_int_value(name, unit, "disabled", &disabled) == 0) {
if (disabled)
continue;
}
ppbus_add_device(dev, name, unit);
}
/*
* and ppbus?
*/
for (i = resource_query_string(-1, "at", "ppbus");
i != -1;
i = resource_query_string(i, "at", "ppbus")) {
unit = resource_query_unit(i);
name = resource_query_name(i);
if (resource_int_value(name, unit, "disabled", &disabled) == 0) {
if (disabled)
continue;
}
ppbus_add_device(dev, name, unit);
}
#ifndef DONTPROBE_1284
/* detect IEEE1284 compliant devices */
ppb_scan_bus(dev);
#endif /* !DONTPROBE_1284 */
/* launch attachement of the added children */
bus_generic_attach(dev);
return 0;
}
static int
ppbus_setup_intr(device_t bus, device_t child, struct resource *r, int flags,
void (*ihand)(void *), void *arg, void **cookiep)
{
int error;
struct ppb_data *ppb = DEVTOSOFTC(bus);
struct ppb_device *ppbdev = (struct ppb_device *)device_get_ivars(child);
/* a device driver must own the bus to register an interrupt */
if (ppb->ppb_owner != child)
return (EINVAL);
if ((error = BUS_SETUP_INTR(device_get_parent(bus), child, r, flags,
ihand, arg, cookiep)))
return (error);
/* store the resource and the cookie for eventually forcing
* handler unregistration
*/
ppbdev->intr_cookie = *cookiep;
ppbdev->intr_resource = r;
return (0);
}
static int
ppbus_teardown_intr(device_t bus, device_t child, struct resource *r, void *ih)
{
struct ppb_data *ppb = DEVTOSOFTC(bus);
struct ppb_device *ppbdev = (struct ppb_device *)device_get_ivars(child);
/* a device driver must own the bus to unregister an interrupt */
if ((ppb->ppb_owner != child) || (ppbdev->intr_cookie != ih) ||
(ppbdev->intr_resource != r))
return (EINVAL);
ppbdev->intr_cookie = 0;
ppbdev->intr_resource = 0;
/* pass unregistration to the upper layer */
return (BUS_TEARDOWN_INTR(device_get_parent(bus), child, r, ih));
}
/*
* ppb_request_bus()
*
* Allocate the device to perform transfers.
*
* how : PPB_WAIT or PPB_DONTWAIT
*/
int
ppb_request_bus(device_t bus, device_t dev, int how)
{
int s, error = 0;
struct ppb_data *ppb = DEVTOSOFTC(bus);
struct ppb_device *ppbdev = (struct ppb_device *)device_get_ivars(dev);
while (!error) {
s = splhigh();
if (ppb->ppb_owner) {
splx(s);
switch (how) {
case (PPB_WAIT | PPB_INTR):
error = tsleep(ppb, PPBPRI|PCATCH, "ppbreq", 0);
break;
case (PPB_WAIT | PPB_NOINTR):
error = tsleep(ppb, PPBPRI, "ppbreq", 0);
break;
default:
return (EWOULDBLOCK);
break;
}
} else {
ppb->ppb_owner = dev;
/* restore the context of the device
* The first time, ctx.valid is certainly false
* then do not change anything. This is usefull for
* drivers that do not set there operating mode
* during attachement
*/
if (ppbdev->ctx.valid)
ppb_set_mode(bus, ppbdev->ctx.mode);
splx(s);
return (0);
}
}
return (error);
}
/*
* ppb_release_bus()
*
* Release the device allocated with ppb_request_dev()
*/
int
ppb_release_bus(device_t bus, device_t dev)
{
int s, error;
struct ppb_data *ppb = DEVTOSOFTC(bus);
struct ppb_device *ppbdev = (struct ppb_device *)device_get_ivars(dev);
if (ppbdev->intr_resource != 0)
/* force interrupt handler unregistration when the ppbus is released */
if ((error = BUS_TEARDOWN_INTR(bus, dev, ppbdev->intr_resource,
ppbdev->intr_cookie)))
return (error);
s = splhigh();
if (ppb->ppb_owner != dev) {
splx(s);
return (EACCES);
}
ppb->ppb_owner = 0;
splx(s);
/* save the context of the device */
ppbdev->ctx.mode = ppb_get_mode(bus);
/* ok, now the context of the device is valid */
ppbdev->ctx.valid = 1;
/* wakeup waiting processes */
wakeup(ppb);
return (0);
}
DRIVER_MODULE(ppbus, ppc, ppbus_driver, ppbus_devclass, 0, 0);