154daa04a7
Found with: Clang Static Analyzer
771 lines
21 KiB
C
771 lines
21 KiB
C
/*-
|
|
* Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
|
|
#ifdef _KERNEL
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/cons.h>
|
|
#include <geom/geom_disk.h>
|
|
#endif /* _KERNEL */
|
|
|
|
#ifndef _KERNEL
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#endif /* _KERNEL */
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_periph.h>
|
|
#include <cam/cam_xpt_periph.h>
|
|
#include <cam/cam_xpt_internal.h>
|
|
#include <cam/cam_sim.h>
|
|
|
|
#include <cam/ata/ata_all.h>
|
|
|
|
#ifdef _KERNEL
|
|
|
|
typedef enum {
|
|
PMP_STATE_NORMAL,
|
|
PMP_STATE_PORTS,
|
|
PMP_STATE_PRECONFIG,
|
|
PMP_STATE_RESET,
|
|
PMP_STATE_CONNECT,
|
|
PMP_STATE_CHECK,
|
|
PMP_STATE_CLEAR,
|
|
PMP_STATE_CONFIG,
|
|
PMP_STATE_SCAN
|
|
} pmp_state;
|
|
|
|
typedef enum {
|
|
PMP_FLAG_SCTX_INIT = 0x200
|
|
} pmp_flags;
|
|
|
|
typedef enum {
|
|
PMP_CCB_PROBE = 0x01,
|
|
} pmp_ccb_state;
|
|
|
|
/* Offsets into our private area for storing information */
|
|
#define ccb_state ppriv_field0
|
|
#define ccb_bp ppriv_ptr1
|
|
|
|
struct pmp_softc {
|
|
SLIST_ENTRY(pmp_softc) links;
|
|
pmp_state state;
|
|
pmp_flags flags;
|
|
uint32_t pm_pid;
|
|
uint32_t pm_prv;
|
|
int pm_ports;
|
|
int pm_step;
|
|
int pm_try;
|
|
int found;
|
|
int reset;
|
|
int frozen;
|
|
int restart;
|
|
int events;
|
|
#define PMP_EV_RESET 1
|
|
#define PMP_EV_RESCAN 2
|
|
u_int caps;
|
|
struct task sysctl_task;
|
|
struct sysctl_ctx_list sysctl_ctx;
|
|
struct sysctl_oid *sysctl_tree;
|
|
};
|
|
|
|
static periph_init_t pmpinit;
|
|
static void pmpasync(void *callback_arg, u_int32_t code,
|
|
struct cam_path *path, void *arg);
|
|
static void pmpsysctlinit(void *context, int pending);
|
|
static periph_ctor_t pmpregister;
|
|
static periph_dtor_t pmpcleanup;
|
|
static periph_start_t pmpstart;
|
|
static periph_oninv_t pmponinvalidate;
|
|
static void pmpdone(struct cam_periph *periph,
|
|
union ccb *done_ccb);
|
|
|
|
#ifndef PMP_DEFAULT_TIMEOUT
|
|
#define PMP_DEFAULT_TIMEOUT 30 /* Timeout in seconds */
|
|
#endif
|
|
|
|
#ifndef PMP_DEFAULT_RETRY
|
|
#define PMP_DEFAULT_RETRY 1
|
|
#endif
|
|
|
|
static int pmp_retry_count = PMP_DEFAULT_RETRY;
|
|
static int pmp_default_timeout = PMP_DEFAULT_TIMEOUT;
|
|
|
|
SYSCTL_NODE(_kern_cam, OID_AUTO, pmp, CTLFLAG_RD, 0,
|
|
"CAM Direct Access Disk driver");
|
|
SYSCTL_INT(_kern_cam_pmp, OID_AUTO, retry_count, CTLFLAG_RW,
|
|
&pmp_retry_count, 0, "Normal I/O retry count");
|
|
TUNABLE_INT("kern.cam.pmp.retry_count", &pmp_retry_count);
|
|
SYSCTL_INT(_kern_cam_pmp, OID_AUTO, default_timeout, CTLFLAG_RW,
|
|
&pmp_default_timeout, 0, "Normal I/O timeout (in seconds)");
|
|
TUNABLE_INT("kern.cam.pmp.default_timeout", &pmp_default_timeout);
|
|
|
|
static struct periph_driver pmpdriver =
|
|
{
|
|
pmpinit, "pmp",
|
|
TAILQ_HEAD_INITIALIZER(pmpdriver.units), /* generation */ 0,
|
|
CAM_PERIPH_DRV_EARLY
|
|
};
|
|
|
|
PERIPHDRIVER_DECLARE(pmp, pmpdriver);
|
|
|
|
MALLOC_DEFINE(M_ATPMP, "ata_pmp", "ata_pmp buffers");
|
|
|
|
static void
|
|
pmpinit(void)
|
|
{
|
|
cam_status status;
|
|
|
|
/*
|
|
* Install a global async callback. This callback will
|
|
* receive async callbacks like "new device found".
|
|
*/
|
|
status = xpt_register_async(AC_FOUND_DEVICE, pmpasync, NULL, NULL);
|
|
|
|
if (status != CAM_REQ_CMP) {
|
|
printf("pmp: Failed to attach master async callback "
|
|
"due to status 0x%x!\n", status);
|
|
}
|
|
}
|
|
|
|
static void
|
|
pmpfreeze(struct cam_periph *periph, int mask)
|
|
{
|
|
struct pmp_softc *softc = (struct pmp_softc *)periph->softc;
|
|
struct cam_path *dpath;
|
|
int i;
|
|
|
|
mask &= ~softc->frozen;
|
|
for (i = 0; i < 15; i++) {
|
|
if ((mask & (1 << i)) == 0)
|
|
continue;
|
|
if (xpt_create_path(&dpath, periph,
|
|
xpt_path_path_id(periph->path),
|
|
i, 0) == CAM_REQ_CMP) {
|
|
softc->frozen |= (1 << i);
|
|
xpt_acquire_device(dpath->device);
|
|
cam_freeze_devq_arg(dpath,
|
|
RELSIM_RELEASE_RUNLEVEL, CAM_RL_BUS + 1);
|
|
xpt_free_path(dpath);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
pmprelease(struct cam_periph *periph, int mask)
|
|
{
|
|
struct pmp_softc *softc = (struct pmp_softc *)periph->softc;
|
|
struct cam_path *dpath;
|
|
int i;
|
|
|
|
mask &= softc->frozen;
|
|
for (i = 0; i < 15; i++) {
|
|
if ((mask & (1 << i)) == 0)
|
|
continue;
|
|
if (xpt_create_path(&dpath, periph,
|
|
xpt_path_path_id(periph->path),
|
|
i, 0) == CAM_REQ_CMP) {
|
|
softc->frozen &= ~(1 << i);
|
|
cam_release_devq(dpath,
|
|
RELSIM_RELEASE_RUNLEVEL, 0, CAM_RL_BUS + 1, FALSE);
|
|
xpt_release_device(dpath->device);
|
|
xpt_free_path(dpath);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
pmponinvalidate(struct cam_periph *periph)
|
|
{
|
|
struct cam_path *dpath;
|
|
int i;
|
|
|
|
/*
|
|
* De-register any async callbacks.
|
|
*/
|
|
xpt_register_async(0, pmpasync, periph, periph->path);
|
|
|
|
for (i = 0; i < 15; i++) {
|
|
if (xpt_create_path(&dpath, periph,
|
|
xpt_path_path_id(periph->path),
|
|
i, 0) == CAM_REQ_CMP) {
|
|
xpt_async(AC_LOST_DEVICE, dpath, NULL);
|
|
xpt_free_path(dpath);
|
|
}
|
|
}
|
|
pmprelease(periph, -1);
|
|
xpt_print(periph->path, "lost device\n");
|
|
}
|
|
|
|
static void
|
|
pmpcleanup(struct cam_periph *periph)
|
|
{
|
|
struct pmp_softc *softc;
|
|
|
|
softc = (struct pmp_softc *)periph->softc;
|
|
|
|
xpt_print(periph->path, "removing device entry\n");
|
|
cam_periph_unlock(periph);
|
|
|
|
/*
|
|
* If we can't free the sysctl tree, oh well...
|
|
*/
|
|
if ((softc->flags & PMP_FLAG_SCTX_INIT) != 0
|
|
&& sysctl_ctx_free(&softc->sysctl_ctx) != 0) {
|
|
xpt_print(periph->path, "can't remove sysctl context\n");
|
|
}
|
|
|
|
free(softc, M_DEVBUF);
|
|
cam_periph_lock(periph);
|
|
}
|
|
|
|
static void
|
|
pmpasync(void *callback_arg, u_int32_t code,
|
|
struct cam_path *path, void *arg)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct pmp_softc *softc;
|
|
|
|
periph = (struct cam_periph *)callback_arg;
|
|
switch (code) {
|
|
case AC_FOUND_DEVICE:
|
|
{
|
|
struct ccb_getdev *cgd;
|
|
cam_status status;
|
|
|
|
cgd = (struct ccb_getdev *)arg;
|
|
if (cgd == NULL)
|
|
break;
|
|
|
|
if (cgd->protocol != PROTO_SATAPM)
|
|
break;
|
|
|
|
/*
|
|
* Allocate a peripheral instance for
|
|
* this device and start the probe
|
|
* process.
|
|
*/
|
|
status = cam_periph_alloc(pmpregister, pmponinvalidate,
|
|
pmpcleanup, pmpstart,
|
|
"pmp", CAM_PERIPH_BIO,
|
|
cgd->ccb_h.path, pmpasync,
|
|
AC_FOUND_DEVICE, cgd);
|
|
|
|
if (status != CAM_REQ_CMP
|
|
&& status != CAM_REQ_INPROG)
|
|
printf("pmpasync: Unable to attach to new device "
|
|
"due to status 0x%x\n", status);
|
|
break;
|
|
}
|
|
case AC_SCSI_AEN:
|
|
case AC_SENT_BDR:
|
|
case AC_BUS_RESET:
|
|
softc = (struct pmp_softc *)periph->softc;
|
|
cam_periph_async(periph, code, path, arg);
|
|
if (code == AC_SCSI_AEN)
|
|
softc->events |= PMP_EV_RESCAN;
|
|
else
|
|
softc->events |= PMP_EV_RESET;
|
|
if (code == AC_SCSI_AEN && softc->state != PMP_STATE_NORMAL)
|
|
break;
|
|
xpt_hold_boot();
|
|
pmpfreeze(periph, softc->found);
|
|
if (code == AC_SENT_BDR || code == AC_BUS_RESET)
|
|
softc->found = 0; /* We have to reset everything. */
|
|
if (softc->state == PMP_STATE_NORMAL) {
|
|
softc->state = PMP_STATE_PRECONFIG;
|
|
cam_periph_acquire(periph);
|
|
xpt_schedule(periph, CAM_PRIORITY_DEV);
|
|
} else
|
|
softc->restart = 1;
|
|
break;
|
|
default:
|
|
cam_periph_async(periph, code, path, arg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
pmpsysctlinit(void *context, int pending)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct pmp_softc *softc;
|
|
char tmpstr[80], tmpstr2[80];
|
|
|
|
periph = (struct cam_periph *)context;
|
|
if (cam_periph_acquire(periph) != CAM_REQ_CMP)
|
|
return;
|
|
|
|
softc = (struct pmp_softc *)periph->softc;
|
|
snprintf(tmpstr, sizeof(tmpstr), "CAM PMP unit %d", periph->unit_number);
|
|
snprintf(tmpstr2, sizeof(tmpstr2), "%d", periph->unit_number);
|
|
|
|
sysctl_ctx_init(&softc->sysctl_ctx);
|
|
softc->flags |= PMP_FLAG_SCTX_INIT;
|
|
softc->sysctl_tree = SYSCTL_ADD_NODE(&softc->sysctl_ctx,
|
|
SYSCTL_STATIC_CHILDREN(_kern_cam_pmp), OID_AUTO, tmpstr2,
|
|
CTLFLAG_RD, 0, tmpstr);
|
|
if (softc->sysctl_tree == NULL) {
|
|
printf("pmpsysctlinit: unable to allocate sysctl tree\n");
|
|
cam_periph_release(periph);
|
|
return;
|
|
}
|
|
|
|
cam_periph_release(periph);
|
|
}
|
|
|
|
static cam_status
|
|
pmpregister(struct cam_periph *periph, void *arg)
|
|
{
|
|
struct pmp_softc *softc;
|
|
struct ccb_getdev *cgd;
|
|
|
|
cgd = (struct ccb_getdev *)arg;
|
|
if (periph == NULL) {
|
|
printf("pmpregister: periph was NULL!!\n");
|
|
return(CAM_REQ_CMP_ERR);
|
|
}
|
|
|
|
if (cgd == NULL) {
|
|
printf("pmpregister: no getdev CCB, can't register device\n");
|
|
return(CAM_REQ_CMP_ERR);
|
|
}
|
|
|
|
softc = (struct pmp_softc *)malloc(sizeof(*softc), M_DEVBUF,
|
|
M_NOWAIT|M_ZERO);
|
|
|
|
if (softc == NULL) {
|
|
printf("pmpregister: Unable to probe new device. "
|
|
"Unable to allocate softc\n");
|
|
return(CAM_REQ_CMP_ERR);
|
|
}
|
|
periph->softc = softc;
|
|
|
|
softc->pm_pid = ((uint32_t *)&cgd->ident_data)[0];
|
|
softc->pm_prv = ((uint32_t *)&cgd->ident_data)[1];
|
|
TASK_INIT(&softc->sysctl_task, 0, pmpsysctlinit, periph);
|
|
|
|
xpt_announce_periph(periph, NULL);
|
|
|
|
/*
|
|
* Add async callbacks for bus reset and
|
|
* bus device reset calls. I don't bother
|
|
* checking if this fails as, in most cases,
|
|
* the system will function just fine without
|
|
* them and the only alternative would be to
|
|
* not attach the device on failure.
|
|
*/
|
|
xpt_register_async(AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE |
|
|
AC_SCSI_AEN, pmpasync, periph, periph->path);
|
|
|
|
/*
|
|
* Take an exclusive refcount on the periph while pmpstart is called
|
|
* to finish the probe. The reference will be dropped in pmpdone at
|
|
* the end of probe.
|
|
*/
|
|
(void)cam_periph_acquire(periph);
|
|
xpt_hold_boot();
|
|
softc->state = PMP_STATE_PORTS;
|
|
softc->events = PMP_EV_RESCAN;
|
|
xpt_schedule(periph, CAM_PRIORITY_DEV);
|
|
|
|
return(CAM_REQ_CMP);
|
|
}
|
|
|
|
static void
|
|
pmpstart(struct cam_periph *periph, union ccb *start_ccb)
|
|
{
|
|
struct ccb_trans_settings cts;
|
|
struct ccb_ataio *ataio;
|
|
struct pmp_softc *softc;
|
|
struct cam_path *dpath;
|
|
int revision = 0;
|
|
|
|
softc = (struct pmp_softc *)periph->softc;
|
|
ataio = &start_ccb->ataio;
|
|
|
|
if (softc->restart) {
|
|
softc->restart = 0;
|
|
softc->state = min(softc->state, PMP_STATE_PRECONFIG);
|
|
}
|
|
/* Fetch user wanted device speed. */
|
|
if (softc->state == PMP_STATE_RESET ||
|
|
softc->state == PMP_STATE_CONNECT) {
|
|
if (xpt_create_path(&dpath, periph,
|
|
xpt_path_path_id(periph->path),
|
|
softc->pm_step, 0) == CAM_REQ_CMP) {
|
|
bzero(&cts, sizeof(cts));
|
|
xpt_setup_ccb(&cts.ccb_h, dpath, CAM_PRIORITY_NONE);
|
|
cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
|
|
cts.type = CTS_TYPE_USER_SETTINGS;
|
|
xpt_action((union ccb *)&cts);
|
|
if (cts.xport_specific.sata.valid & CTS_SATA_VALID_REVISION)
|
|
revision = cts.xport_specific.sata.revision;
|
|
xpt_free_path(dpath);
|
|
}
|
|
}
|
|
switch (softc->state) {
|
|
case PMP_STATE_PORTS:
|
|
cam_fill_ataio(ataio,
|
|
pmp_retry_count,
|
|
pmpdone,
|
|
/*flags*/CAM_DIR_NONE,
|
|
0,
|
|
/*data_ptr*/NULL,
|
|
/*dxfer_len*/0,
|
|
pmp_default_timeout * 1000);
|
|
ata_pm_read_cmd(ataio, 2, 15);
|
|
break;
|
|
case PMP_STATE_PRECONFIG:
|
|
/* Get/update host SATA capabilities. */
|
|
bzero(&cts, sizeof(cts));
|
|
xpt_setup_ccb(&cts.ccb_h, periph->path, CAM_PRIORITY_NONE);
|
|
cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
|
|
cts.type = CTS_TYPE_CURRENT_SETTINGS;
|
|
xpt_action((union ccb *)&cts);
|
|
if (cts.xport_specific.sata.valid & CTS_SATA_VALID_CAPS)
|
|
softc->caps = cts.xport_specific.sata.caps;
|
|
cam_fill_ataio(ataio,
|
|
pmp_retry_count,
|
|
pmpdone,
|
|
/*flags*/CAM_DIR_NONE,
|
|
0,
|
|
/*data_ptr*/NULL,
|
|
/*dxfer_len*/0,
|
|
pmp_default_timeout * 1000);
|
|
ata_pm_write_cmd(ataio, 0x60, 15, 0x0);
|
|
break;
|
|
case PMP_STATE_RESET:
|
|
cam_fill_ataio(ataio,
|
|
pmp_retry_count,
|
|
pmpdone,
|
|
/*flags*/CAM_DIR_NONE,
|
|
0,
|
|
/*data_ptr*/NULL,
|
|
/*dxfer_len*/0,
|
|
pmp_default_timeout * 1000);
|
|
ata_pm_write_cmd(ataio, 2, softc->pm_step,
|
|
(revision << 4) |
|
|
((softc->found & (1 << softc->pm_step)) ? 0 : 1));
|
|
break;
|
|
case PMP_STATE_CONNECT:
|
|
cam_fill_ataio(ataio,
|
|
pmp_retry_count,
|
|
pmpdone,
|
|
/*flags*/CAM_DIR_NONE,
|
|
0,
|
|
/*data_ptr*/NULL,
|
|
/*dxfer_len*/0,
|
|
pmp_default_timeout * 1000);
|
|
ata_pm_write_cmd(ataio, 2, softc->pm_step,
|
|
(revision << 4));
|
|
break;
|
|
case PMP_STATE_CHECK:
|
|
cam_fill_ataio(ataio,
|
|
pmp_retry_count,
|
|
pmpdone,
|
|
/*flags*/CAM_DIR_NONE,
|
|
0,
|
|
/*data_ptr*/NULL,
|
|
/*dxfer_len*/0,
|
|
pmp_default_timeout * 1000);
|
|
ata_pm_read_cmd(ataio, 0, softc->pm_step);
|
|
break;
|
|
case PMP_STATE_CLEAR:
|
|
softc->reset = 0;
|
|
cam_fill_ataio(ataio,
|
|
pmp_retry_count,
|
|
pmpdone,
|
|
/*flags*/CAM_DIR_NONE,
|
|
0,
|
|
/*data_ptr*/NULL,
|
|
/*dxfer_len*/0,
|
|
pmp_default_timeout * 1000);
|
|
ata_pm_write_cmd(ataio, 1, softc->pm_step, 0xFFFFFFFF);
|
|
break;
|
|
case PMP_STATE_CONFIG:
|
|
cam_fill_ataio(ataio,
|
|
pmp_retry_count,
|
|
pmpdone,
|
|
/*flags*/CAM_DIR_NONE,
|
|
0,
|
|
/*data_ptr*/NULL,
|
|
/*dxfer_len*/0,
|
|
pmp_default_timeout * 1000);
|
|
ata_pm_write_cmd(ataio, 0x60, 15, 0x07 |
|
|
((softc->caps & CTS_SATA_CAPS_H_AN) ? 0x08 : 0));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
xpt_action(start_ccb);
|
|
}
|
|
|
|
static void
|
|
pmpdone(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct ccb_trans_settings cts;
|
|
struct pmp_softc *softc;
|
|
struct ccb_ataio *ataio;
|
|
struct cam_path *dpath;
|
|
u_int32_t priority, res;
|
|
int i;
|
|
|
|
softc = (struct pmp_softc *)periph->softc;
|
|
ataio = &done_ccb->ataio;
|
|
|
|
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("pmpdone\n"));
|
|
|
|
priority = done_ccb->ccb_h.pinfo.priority;
|
|
|
|
if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
|
|
if (cam_periph_error(done_ccb, 0, 0, NULL) == ERESTART) {
|
|
return;
|
|
} else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
|
|
cam_release_devq(done_ccb->ccb_h.path,
|
|
/*relsim_flags*/0,
|
|
/*reduction*/0,
|
|
/*timeout*/0,
|
|
/*getcount_only*/0);
|
|
}
|
|
goto done;
|
|
}
|
|
|
|
if (softc->restart) {
|
|
softc->restart = 0;
|
|
xpt_release_ccb(done_ccb);
|
|
softc->state = min(softc->state, PMP_STATE_PRECONFIG);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
}
|
|
|
|
switch (softc->state) {
|
|
case PMP_STATE_PORTS:
|
|
softc->pm_ports = (ataio->res.lba_high << 24) +
|
|
(ataio->res.lba_mid << 16) +
|
|
(ataio->res.lba_low << 8) +
|
|
ataio->res.sector_count;
|
|
/* This PMP declares 6 ports, while only 5 of them are real.
|
|
* Port 5 is enclosure management bridge port, which has implementation
|
|
* problems, causing probe faults. Hide it for now. */
|
|
if (softc->pm_pid == 0x37261095 && softc->pm_ports == 6)
|
|
softc->pm_ports = 5;
|
|
/* This PMP declares 7 ports, while only 5 of them are real.
|
|
* Port 5 is some fake "Config Disk" with 640 sectors size,
|
|
* port 6 is enclosure management bridge port.
|
|
* Both fake ports has implementation problems, causing
|
|
* probe faults. Hide them for now. */
|
|
if (softc->pm_pid == 0x47261095 && softc->pm_ports == 7)
|
|
softc->pm_ports = 5;
|
|
/* These PMPs declare one more port then actually have,
|
|
* for configuration purposes. Hide it for now. */
|
|
if (softc->pm_pid == 0x57231095 || softc->pm_pid == 0x57331095 ||
|
|
softc->pm_pid == 0x57341095 || softc->pm_pid == 0x57441095)
|
|
softc->pm_ports--;
|
|
printf("%s%d: %d fan-out ports\n",
|
|
periph->periph_name, periph->unit_number,
|
|
softc->pm_ports);
|
|
softc->state = PMP_STATE_PRECONFIG;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
case PMP_STATE_PRECONFIG:
|
|
softc->pm_step = 0;
|
|
softc->state = PMP_STATE_RESET;
|
|
softc->reset |= ~softc->found;
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
case PMP_STATE_RESET:
|
|
softc->pm_step++;
|
|
if (softc->pm_step >= softc->pm_ports) {
|
|
softc->pm_step = 0;
|
|
cam_freeze_devq(periph->path);
|
|
cam_release_devq(periph->path,
|
|
RELSIM_RELEASE_AFTER_TIMEOUT,
|
|
/*reduction*/0,
|
|
/*timeout*/5,
|
|
/*getcount_only*/0);
|
|
softc->state = PMP_STATE_CONNECT;
|
|
}
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
case PMP_STATE_CONNECT:
|
|
softc->pm_step++;
|
|
if (softc->pm_step >= softc->pm_ports) {
|
|
softc->pm_step = 0;
|
|
softc->pm_try = 0;
|
|
cam_freeze_devq(periph->path);
|
|
cam_release_devq(periph->path,
|
|
RELSIM_RELEASE_AFTER_TIMEOUT,
|
|
/*reduction*/0,
|
|
/*timeout*/10,
|
|
/*getcount_only*/0);
|
|
softc->state = PMP_STATE_CHECK;
|
|
}
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
case PMP_STATE_CHECK:
|
|
res = (ataio->res.lba_high << 24) +
|
|
(ataio->res.lba_mid << 16) +
|
|
(ataio->res.lba_low << 8) +
|
|
ataio->res.sector_count;
|
|
if (((res & 0xf0f) == 0x103 && (res & 0x0f0) != 0) ||
|
|
(res & 0x600) != 0) {
|
|
if (bootverbose) {
|
|
printf("%s%d: port %d status: %08x\n",
|
|
periph->periph_name, periph->unit_number,
|
|
softc->pm_step, res);
|
|
}
|
|
/* Report device speed if it is online. */
|
|
if ((res & 0xf0f) == 0x103 &&
|
|
xpt_create_path(&dpath, periph,
|
|
xpt_path_path_id(periph->path),
|
|
softc->pm_step, 0) == CAM_REQ_CMP) {
|
|
bzero(&cts, sizeof(cts));
|
|
xpt_setup_ccb(&cts.ccb_h, dpath, CAM_PRIORITY_NONE);
|
|
cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
|
|
cts.type = CTS_TYPE_CURRENT_SETTINGS;
|
|
cts.xport_specific.sata.revision = (res & 0x0f0) >> 4;
|
|
cts.xport_specific.sata.valid = CTS_SATA_VALID_REVISION;
|
|
cts.xport_specific.sata.caps = softc->caps &
|
|
(CTS_SATA_CAPS_H_PMREQ |
|
|
CTS_SATA_CAPS_H_DMAAA |
|
|
CTS_SATA_CAPS_H_AN);
|
|
cts.xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
|
|
xpt_action((union ccb *)&cts);
|
|
xpt_free_path(dpath);
|
|
}
|
|
softc->found |= (1 << softc->pm_step);
|
|
softc->pm_step++;
|
|
} else {
|
|
if (softc->pm_try < 10) {
|
|
cam_freeze_devq(periph->path);
|
|
cam_release_devq(periph->path,
|
|
RELSIM_RELEASE_AFTER_TIMEOUT,
|
|
/*reduction*/0,
|
|
/*timeout*/10,
|
|
/*getcount_only*/0);
|
|
softc->pm_try++;
|
|
} else {
|
|
if (bootverbose) {
|
|
printf("%s%d: port %d status: %08x\n",
|
|
periph->periph_name, periph->unit_number,
|
|
softc->pm_step, res);
|
|
}
|
|
softc->found &= ~(1 << softc->pm_step);
|
|
if (xpt_create_path(&dpath, periph,
|
|
done_ccb->ccb_h.path_id,
|
|
softc->pm_step, 0) == CAM_REQ_CMP) {
|
|
xpt_async(AC_LOST_DEVICE, dpath, NULL);
|
|
xpt_free_path(dpath);
|
|
}
|
|
softc->pm_step++;
|
|
}
|
|
}
|
|
if (softc->pm_step >= softc->pm_ports) {
|
|
if (softc->reset & softc->found) {
|
|
cam_freeze_devq(periph->path);
|
|
cam_release_devq(periph->path,
|
|
RELSIM_RELEASE_AFTER_TIMEOUT,
|
|
/*reduction*/0,
|
|
/*timeout*/1000,
|
|
/*getcount_only*/0);
|
|
}
|
|
softc->state = PMP_STATE_CLEAR;
|
|
softc->pm_step = 0;
|
|
}
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
case PMP_STATE_CLEAR:
|
|
softc->pm_step++;
|
|
if (softc->pm_step >= softc->pm_ports) {
|
|
softc->state = PMP_STATE_CONFIG;
|
|
softc->pm_step = 0;
|
|
}
|
|
xpt_release_ccb(done_ccb);
|
|
xpt_schedule(periph, priority);
|
|
return;
|
|
case PMP_STATE_CONFIG:
|
|
for (i = 0; i < softc->pm_ports; i++) {
|
|
union ccb *ccb;
|
|
|
|
if ((softc->found & (1 << i)) == 0)
|
|
continue;
|
|
if (xpt_create_path(&dpath, periph,
|
|
xpt_path_path_id(periph->path),
|
|
i, 0) != CAM_REQ_CMP) {
|
|
printf("pmpdone: xpt_create_path failed\n");
|
|
continue;
|
|
}
|
|
/* If we did hard reset to this device, inform XPT. */
|
|
if ((softc->reset & softc->found & (1 << i)) != 0)
|
|
xpt_async(AC_SENT_BDR, dpath, NULL);
|
|
/* If rescan requested, scan this device. */
|
|
if (softc->events & PMP_EV_RESCAN) {
|
|
ccb = xpt_alloc_ccb_nowait();
|
|
if (ccb == NULL) {
|
|
xpt_free_path(dpath);
|
|
goto done;
|
|
}
|
|
xpt_setup_ccb(&ccb->ccb_h, dpath, CAM_PRIORITY_XPT);
|
|
xpt_rescan(ccb);
|
|
} else
|
|
xpt_free_path(dpath);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
done:
|
|
xpt_release_ccb(done_ccb);
|
|
softc->state = PMP_STATE_NORMAL;
|
|
softc->events = 0;
|
|
xpt_release_boot();
|
|
pmprelease(periph, -1);
|
|
cam_periph_release_locked(periph);
|
|
}
|
|
|
|
#endif /* _KERNEL */
|