freebsd-skq/sys/dev/rtwn/rtl8821a/r21a_reg.h
Andriy Voskoboinyk 7453645f2a rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
 * for RTL8821AU: 2 VAPs at the same time;
 * other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
 * bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
 * common (if_rtwn*)
 * chip-specific (rtl*/*)
- various other bugfixes.

Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn  rtwnfw  -> rtwn rtwn_pci rtwnfw

Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.

Tested by:	kevlo, garga,
		Peter Garshtja <peter.garshtja@ambient-md.com>,
		Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
		Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
		<otacilio.neto@bsd.com.br>
Relnotes:	yes
2016-10-17 20:38:24 +00:00

51 lines
1.8 KiB
C

/*-
* Copyright (c) 2016 Andriy Voskoboinyk <avos@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef R21A_REG_H
#define R21A_REG_H
#include <dev/rtwn/rtl8812a/r12a_reg.h>
/*
* MAC registers.
*/
/* Tx DMA Configuration. */
#define R21A_DWBCN0_CTRL R92C_TDECTRL
#define R21A_DWBCN1_CTRL 0x228
/* Bits for R92C_MAC_PHY_CTRL. */
#define R21A_MAC_PHY_CRYSTALCAP_M 0x00fff000
#define R21A_MAC_PHY_CRYSTALCAP_S 12
/* Bits for R21A_DWBCN1_CTRL. */
#define R21A_DWBCN1_CTRL_SEL_EN 0x00020000
#define R21A_DWBCN1_CTRL_SEL_BCN1 0x00100000
#endif /* R21A_REG_H */