cdfdb8738b
at boot time.
Instead of rc.conf's sendmail_enable only accepting YES or NO, it can now
also accept NONE. If set to NONE, none of the other sendmail related
startup items will be done.
Remove an extra queue running daemon might be started that wasn't necessary
(it didn't hurt anything but it wasn't needed).
The new logic is:
# MTA
if ${sendmail_enable} == NONE
# Do nothing
else if ${sendmail_enable} == YES
start sendmail with ${sendmail_flags}
else if ${sendmail_submit_enable} == YES
start sendmail with ${sendmail_submit_flags}
else if ${sendmail_outbound_enable} == YES
start sendmail with ${sendmail_outbound_flags}
endif
# MSP Queue Runner
if ${sendmail_enable} != NONE &&
[ -r /etc/mail/submit.cf] && ${sendmail_msp_queue_enable} == YES
start sendmail with ${sendmail_msp_queue_flags}
endif
Discussed with: Thomas Quinot <Thomas.Quinot@Cuivre.FR.EU.ORG>,
Christopher Schulte <schulte+freebsd@nospam.schulte.org>
MFC after: 1 week
405 lines
21 KiB
Bash
405 lines
21 KiB
Bash
#!/bin/sh
|
|
#
|
|
|
|
# This is rc.conf - a file full of useful variables that you can set
|
|
# to change the default startup behavior of your system. You should
|
|
# not edit this file! Put any overrides into one of the ${rc_conf_files}
|
|
# instead and you will be able to update these defaults later without
|
|
# spamming your local configuration information.
|
|
#
|
|
# The ${rc_conf_files} files should only contain values which override
|
|
# values set in this file. This eases the upgrade path when defaults
|
|
# are changed and new features are added.
|
|
#
|
|
# All arguments must be in double or single quotes.
|
|
#
|
|
# $FreeBSD$
|
|
|
|
##############################################################
|
|
### Important initial Boot-time options ####################
|
|
##############################################################
|
|
|
|
swapfile="NO" # Set to name of swapfile if aux swapfile desired.
|
|
apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
|
|
apmd_enable="NO" # Run apmd to handle APM event from userland.
|
|
apmd_flags="" # Flags to apmd (if enabled).
|
|
pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
|
|
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
|
|
pccard_beep="2" # pccard beep type.
|
|
pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
|
|
pccardd_flags="" # Additional flags for pccardd.
|
|
pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file
|
|
pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
|
|
removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
|
|
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
|
|
script_name_sep=" " # Change if your startup scripts' names contain spaces
|
|
rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
|
|
fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
|
|
background_fsck="YES" # Attempt to run fsck in the background where possible.
|
|
extra_netfs_types="NO" # List of network extra filesystem types for delayed
|
|
# mount at startup (or NO).
|
|
|
|
##############################################################
|
|
### Network configuration sub-section ######################
|
|
##############################################################
|
|
|
|
### Basic network and firewall/security options: ###
|
|
hostname="" # Set this!
|
|
nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
|
|
dhcp_program="/sbin/dhclient" # Path to dhcp client program.
|
|
dhcp_flags="" # Additional flags to pass to dhcp client.
|
|
firewall_enable="NO" # Set to YES to enable firewall functionality
|
|
firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
|
|
firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
|
|
firewall_quiet="NO" # Set to YES to suppress rule display
|
|
firewall_logging="NO" # Set to YES to enable events logging
|
|
firewall_flags="" # Flags passed to ipfw when type is a file
|
|
ip_portrange_first="NO" # Set first dynamically allocated port
|
|
ip_portrange_last="NO" # Set last dynamically allocated port
|
|
ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
|
|
ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
|
|
natd_program="/sbin/natd" # path to natd, if you want a different one.
|
|
natd_enable="NO" # Enable natd (if firewall_enable == YES).
|
|
natd_interface="" # Public interface or IPaddress to use.
|
|
natd_flags="" # Additional flags for natd.
|
|
ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
|
|
ipfilter_program="/sbin/ipf" # where the ipfilter program lives
|
|
ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
|
|
# /usr/src/contrib/ipfilter/rules for examples
|
|
ipfilter_flags="" # additional flags for ipfilter
|
|
ipnat_enable="NO" # Set to YES to enable ipnat functionality
|
|
ipnat_program="/sbin/ipnat" # where the ipnat program lives
|
|
ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
|
|
ipnat_flags="" # additional flags for ipnat
|
|
ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
|
|
ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
|
|
ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
|
|
ipfs_enable="NO" # Set to YES to enable saving and restoring
|
|
# of state tables at shutdown and boot
|
|
ipfs_program="/sbin/ipfs" # where the ipfs program lives
|
|
ipfs_flags="" # additional flags for ipfs
|
|
tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
|
|
log_in_vain="0" # >=1 to log connects to ports w/o listeners.
|
|
tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
|
|
# For the following two options, you need to have TCP_DROP_SYNFIN and
|
|
# TCP_RESTRICT_RST set in your kernel. Please refer to LINT for details.
|
|
tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
|
|
# NOTE: this violates the TCP specification
|
|
icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
|
|
icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
|
|
network_interfaces="auto" # List of network interfaces (or "auto").
|
|
cloned_interfaces="" # List of cloned network interfaces to create.
|
|
#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
|
|
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
|
|
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
|
|
#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
|
|
#
|
|
# If you have any sppp(4) interfaces above, you might also want to set
|
|
# the following parameters. Refer to spppcontrol(8) for their meaning.
|
|
sppp_interfaces="" # List of sppp interfaces.
|
|
#sppp_interfaces="isp0" # example: sppp over ISDN
|
|
#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
|
|
gif_interfaces="NO" # List of GIF tunnels (or "NO").
|
|
#gif_interfaces="gif0 gif1" # Examples typically for a router.
|
|
# Choose correct tunnel addrs.
|
|
#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
|
|
#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
|
|
|
|
# User ppp configuration.
|
|
ppp_enable="NO" # Start user-ppp (or NO).
|
|
ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
|
|
# For details see man page for ppp(8). Default is auto.
|
|
ppp_nat="YES" # Use PPP's internal network address translation or NO.
|
|
ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
|
|
ppp_user="root" # Which user to run ppp as
|
|
|
|
### Network daemon (miscellaneous) ###
|
|
syslogd_enable="YES" # Run syslog daemon (or NO).
|
|
syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
|
|
syslogd_flags="-s" # Flags to syslogd (if enabled).
|
|
#syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
|
|
inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
|
|
inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
|
|
inetd_flags="-wW" # Optional flags to inetd
|
|
#
|
|
# named. It may be possible to run named in a sandbox, man security for
|
|
# details.
|
|
#
|
|
named_enable="NO" # Run named, the DNS server (or NO).
|
|
named_program="named" # path to named, if you want a different one.
|
|
named_flags="-u bind -g bind" # Flags for named
|
|
|
|
#
|
|
# kerberos. Do not run the admin daemons on slave servers
|
|
#
|
|
kerberos4_server_enable="NO" # Run a kerberos IV master server (or NO).
|
|
kerberos4_server="/usr/sbin/kerberos" # path to kerberos IV KDC
|
|
kadmind4_server_enable="NO" # Run kadmind (or NO)
|
|
kadmind4_server="/usr/sbin/kadmind" # path to kerberos IV admin daemon
|
|
kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
|
|
kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
|
|
kadmind5_server_enable="NO" # Run kadmind (or NO)
|
|
kadmind5_server="/usr/libexec/k5admind" # path to kerberos 5 admin daemon
|
|
kerberos_stash="" # Is the kerberos master key stashed?
|
|
|
|
rwhod_enable="NO" # Run the rwho daemon (or NO).
|
|
rwhod_flags="" # Flags for rwhod
|
|
rarpd_enable="NO" # Run rarpd (or NO).
|
|
rarpd_flags="" # Flags to rarpd.
|
|
xtend_enable="NO" # Run the X-10 power controller daemon.
|
|
xtend_flags="" # Flags to xtend (if enabled).
|
|
pppoed_enable="NO" # Run the PPP over Ethernet daemon.
|
|
pppoed_provider="*" # Provider and ppp(8) config file entry.
|
|
pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
|
|
pppoed_interface="fxp0" # The interface that pppoed runs on.
|
|
sshd_enable="NO" # Enable sshd
|
|
sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
|
|
sshd_flags="" # Additional flags for sshd.
|
|
|
|
### Network daemon (NFS) Need all portmap_enable="YES" ###
|
|
amd_enable="NO" # Run amd service with $amd_flags (or NO).
|
|
amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
|
|
amd_map_program="NO" # Can be set to "ypcat -k amd.master"
|
|
nfs_client_enable="NO" # This host is an NFS client (or NO).
|
|
nfs_access_cache="2" # Client cache timeout in seconds
|
|
nfs_server_enable="NO" # This host is an NFS server (or NO).
|
|
nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
|
|
single_mountd_enable="NO" # Run mountd only (or NO).
|
|
mountd_flags="-r" # Flags to mountd (if NFS server enabled).
|
|
weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
|
|
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
|
|
nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT)
|
|
rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
|
|
rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
|
|
portmap_enable="NO" # Run the portmapper service (YES/NO).
|
|
portmap_program="/usr/sbin/rpcbind" # path to portmap, if you want a different one.
|
|
portmap_flags="" # Flags to portmap (if enabled).
|
|
rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
|
|
keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
|
|
keyserv_flags="" # Flags to keyserv (if enabled).
|
|
|
|
### Network Time Services options: ###
|
|
timed_enable="NO" # Run the time daemon (or NO).
|
|
timed_flags="" # Flags to timed (if enabled).
|
|
ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
|
|
ntpdate_program="ntpdate" # path to ntpdate, if you want a different one.
|
|
ntpdate_flags="-b" # Flags to ntpdate (if enabled).
|
|
xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
|
|
xntpd_program="ntpd" # path to ntpd, if you want a different one.
|
|
xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled).
|
|
|
|
# Network Information Services (NIS) options: Need all portmap_enable="YES" ###
|
|
nis_client_enable="NO" # We're an NIS client (or NO).
|
|
nis_client_flags="" # Flags to ypbind (if enabled).
|
|
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
|
|
nis_ypset_flags="" # Flags to ypset (if enabled).
|
|
nis_server_enable="NO" # We're an NIS server (or NO).
|
|
nis_server_flags="" # Flags to ypserv (if enabled).
|
|
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
|
|
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
|
|
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
|
|
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
|
|
|
|
### Network routing options: ###
|
|
defaultrouter="NO" # Set to default gateway (or NO).
|
|
static_routes="" # Set to static route list (or leave empty).
|
|
gateway_enable="NO" # Set to YES if this host will be a gateway.
|
|
router_enable="NO" # Set to YES to enable a routing daemon.
|
|
router="routed" # Name of routing daemon to use if enabled.
|
|
router_flags="-q" # Flags for routing daemon.
|
|
mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
|
|
mrouted_flags="" # Flags for multicast routing daemon.
|
|
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
|
|
ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
|
|
ipxrouted_flags="" # Flags for IPX routing daemon.
|
|
arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
|
|
forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
|
|
accept_sourceroute="NO" # accept source routed packets to us
|
|
|
|
### ATM interface options: ###
|
|
atm_enable="NO" # Configure ATM interfaces (or NO).
|
|
#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
|
|
#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
|
|
#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
|
|
#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
|
|
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
|
|
#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
|
|
atm_pvcs="" # Set to PVC list (or leave empty).
|
|
atm_arps="" # Set to permanent ARP list (or leave empty).
|
|
|
|
### ISDN interface options: (see also: /usr/share/examples/isdn) ###
|
|
isdn_enable="NO" # Enable the ISDN subsystem (or NO).
|
|
isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
|
|
isdn_flags="-dn -d0x1f9" # Flags for isdnd
|
|
isdn_ttype="cons25" # terminal type for fullscreen mode
|
|
isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
|
|
isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
|
|
isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
|
|
|
|
### Miscellaneous network options: ###
|
|
icmp_bmcastecho="NO" # respond to broadcast ping packets
|
|
|
|
### IPv6 options: ###
|
|
ipv6_enable="NO" # Set to YES to set up for IPv6.
|
|
ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
|
|
ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
|
|
#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
|
|
ipv6_static_routes="" # Set to static route list (or leave empty).
|
|
#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
|
|
# route toward loopback interface.
|
|
#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
|
|
ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
|
|
ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
|
|
ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
|
|
ipv6_router_flags="" # Flags to IPv6 routing daemon.
|
|
#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
|
|
# addrs.
|
|
#ipv6_network_interfaces="ed0 ep0" # Examples for router
|
|
# or static configuration for end node.
|
|
# Choose correct prefix value.
|
|
#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
|
|
#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
|
|
#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
|
|
#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
|
|
ipv6_default_interface="NO" # Default output interface for scoped addrs.
|
|
# Now this works only for IPv6 link local
|
|
# multicast addrs.
|
|
rtadvd_enable="NO" # Set to YES to enable an IPv6 router
|
|
# advertisement daemon. If set to YES,
|
|
# this router becomes a possible candidate
|
|
# IPv6 default router for local subnets.
|
|
rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
|
|
mroute6d_enable="NO" # Do IPv6 multicast routing.
|
|
mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
|
|
# routing daemon. You need to
|
|
# install it from package or
|
|
# port.
|
|
mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
|
|
stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
|
|
# tunneling interface. Specify this entry
|
|
# to enable 6to4 interface.
|
|
stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
|
|
# to limit peer addr range. Effective value
|
|
# is 0-31.
|
|
stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
|
|
# If you like, you can set "AUTO" for this.
|
|
stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
|
|
ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
|
|
# IPv6-to-IPv4 TCP translator. You also need
|
|
# faithd(8) setup.
|
|
ipv6_ipv4mapping="YES" # Leave empty to disable IPv4 mapped IPv6 addr
|
|
# communication. (like ::ffff:a.b.c.d)
|
|
ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
|
|
# functionality
|
|
ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
|
|
ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
|
|
ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
|
|
ipv6_firewall_logging="NO" # Set to YES to enable events logging
|
|
ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
|
|
|
|
##############################################################
|
|
### System console options #################################
|
|
##############################################################
|
|
|
|
keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
|
|
keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
|
|
keybell="NO" # bell to duration.pitch or normal or visual (or NO).
|
|
keychange="NO" # function keys default values (or NO).
|
|
cursor="NO" # cursor type {normal|blink|destructive} (or NO).
|
|
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
|
|
font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
|
|
font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
|
|
font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
|
|
blanktime="300" # blank time (in seconds) or "NO" to turn it off.
|
|
saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
|
|
moused_enable="NO" # Run the mouse daemon.
|
|
moused_type="auto" # See man page for rc.conf(5) for available settings.
|
|
moused_port="/dev/psm0" # Set to your mouse port.
|
|
moused_flags="" # Any additional flags to moused.
|
|
mousechar_start="NO" # if 0xd0-0xd3 default range is occuped in your
|
|
# language code table, specify alternative range
|
|
# start like mousechar_start=3, see vidcontrol(1)
|
|
allscreens_flags="" # Set this vidcontrol mode for all virtual screens
|
|
allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
|
|
|
|
|
|
##############################################################
|
|
### Miscellaneous administrative options ###################
|
|
##############################################################
|
|
|
|
cron_enable="YES" # Run the periodic job daemon.
|
|
cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
|
|
cron_flags="" # Which options to pass to the cron daemon.
|
|
lpd_enable="NO" # Run the line printer daemon.
|
|
lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
|
|
lpd_flags="" # Flags to lpd (if enabled).
|
|
usbd_enable="NO" # Run the usbd daemon.
|
|
usbd_flags="" # Flags to usbd (if enabled).
|
|
sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO/NONE).
|
|
# If NONE, don't start any sendmail processes.
|
|
sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
|
|
sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
|
|
sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
|
|
# Flags for localhost-only MTA
|
|
sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
|
|
sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
|
|
sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
|
|
sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
|
|
# Flags for sendmail_msp_queue daemon.
|
|
dumpdev="NO" # Device name to crashdump to (or NO).
|
|
dumpdir="/var/crash" # Directory where crash dumps are to be stored
|
|
savecore_flags="" # Used if dumpdev is enabled above, and present.
|
|
enable_quotas="NO" # turn on quotas on startup (or NO).
|
|
check_quotas="YES" # Check quotas on startup (or NO).
|
|
accounting_enable="NO" # Turn on process accounting (or NO).
|
|
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
|
|
ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
|
|
sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
|
|
linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
|
|
svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
|
|
osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO).
|
|
clear_tmp_enable="NO" # Clear /tmp at startup.
|
|
ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
|
|
ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
|
|
# shared library search paths
|
|
ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
|
|
# a.out shared library search paths
|
|
kern_securelevel_enable="NO" # kernel security level (see init(8)),
|
|
kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
|
|
lomac_enable="NO" # start lomac(4) security module at boot
|
|
update_motd="YES" # update version info in /etc/motd (or NO)
|
|
start_vinum="NO" # set to YES to start vinum
|
|
unaligned_print="YES" # print unaligned access warnings on the alpha (or NO).
|
|
entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
|
|
# /var/db/entropy is preferred if / is not available.
|
|
entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
|
|
entropy_save_sz="2048" # Size of the entropy cache files.
|
|
entropy_save_num="8" # Number of entropy cache files to save.
|
|
harvest_interrupt="YES" # Entropy device harvests interrupt randomness
|
|
harvest_ethernet="YES" # Entropy device harvests ethernet randomness
|
|
harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
|
|
|
|
##############################################################
|
|
### Define source_rc_confs, the mechanism used by /etc/rc.* ##
|
|
### scripts to source rc_conf_files overrides safely. ##
|
|
##############################################################
|
|
|
|
if [ -z "${source_rc_confs_defined}" ]; then
|
|
source_rc_confs_defined=yes
|
|
source_rc_confs () {
|
|
local i sourced_files
|
|
for i in ${rc_conf_files}; do
|
|
case ${sourced_files} in
|
|
*:$i:*)
|
|
;;
|
|
*)
|
|
sourced_files="${sourced_files}:$i:"
|
|
if [ -r $i ]; then
|
|
. $i
|
|
fi
|
|
;;
|
|
esac
|
|
done
|
|
}
|
|
fi
|