d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1b9d93948a
freebsd-skq/sys/dev/ixl/i40e_adminq.c
Eric Joyner f4cc2d1710 ixl(4): Update version number to 2.0.0-k 
And update copyrights to current year.

MFC after:	1 month
Sponsored by:	Intel Corporation
2018-06-18 20:32:53 +00:00

1104 lines
31 KiB
C
Raw Blame History

/******************************************************************************
Copyright (c) 2013-2018, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
******************************************************************************/
/*$FreeBSD$*/
#include "i40e_status.h"
#include "i40e_type.h"
#include "i40e_register.h"
#include "i40e_adminq.h"
#include "i40e_prototype.h"
/**
* i40e_adminq_init_regs - Initialize AdminQ registers
* @hw: pointer to the hardware structure
*
* This assumes the alloc_asq and alloc_arq functions have already been called
**/
static void i40e_adminq_init_regs(struct i40e_hw *hw)
{
/* set head and tail registers in our local struct */
if (i40e_is_vf(hw)) {
hw->aq.asq.tail = I40E_VF_ATQT1;
hw->aq.asq.head = I40E_VF_ATQH1;
hw->aq.asq.len = I40E_VF_ATQLEN1;
hw->aq.asq.bal = I40E_VF_ATQBAL1;
hw->aq.asq.bah = I40E_VF_ATQBAH1;
hw->aq.arq.tail = I40E_VF_ARQT1;
hw->aq.arq.head = I40E_VF_ARQH1;
hw->aq.arq.len = I40E_VF_ARQLEN1;
hw->aq.arq.bal = I40E_VF_ARQBAL1;
hw->aq.arq.bah = I40E_VF_ARQBAH1;
} else {
hw->aq.asq.tail = I40E_PF_ATQT;
hw->aq.asq.head = I40E_PF_ATQH;
hw->aq.asq.len = I40E_PF_ATQLEN;
hw->aq.asq.bal = I40E_PF_ATQBAL;
hw->aq.asq.bah = I40E_PF_ATQBAH;
hw->aq.arq.tail = I40E_PF_ARQT;
hw->aq.arq.head = I40E_PF_ARQH;
hw->aq.arq.len = I40E_PF_ARQLEN;
hw->aq.arq.bal = I40E_PF_ARQBAL;
hw->aq.arq.bah = I40E_PF_ARQBAH;
}
}
/**
* i40e_alloc_adminq_asq_ring - Allocate Admin Queue send rings
* @hw: pointer to the hardware structure
**/
enum i40e_status_code i40e_alloc_adminq_asq_ring(struct i40e_hw *hw)
{
enum i40e_status_code ret_code;
ret_code = i40e_allocate_dma_mem(hw, &hw->aq.asq.desc_buf,
i40e_mem_atq_ring,
(hw->aq.num_asq_entries *
sizeof(struct i40e_aq_desc)),
I40E_ADMINQ_DESC_ALIGNMENT);
if (ret_code)
return ret_code;
ret_code = i40e_allocate_virt_mem(hw, &hw->aq.asq.cmd_buf,
(hw->aq.num_asq_entries *
sizeof(struct i40e_asq_cmd_details)));
if (ret_code) {
i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf);
return ret_code;
}
return ret_code;
}
/**
* i40e_alloc_adminq_arq_ring - Allocate Admin Queue receive rings
* @hw: pointer to the hardware structure
**/
enum i40e_status_code i40e_alloc_adminq_arq_ring(struct i40e_hw *hw)
{
enum i40e_status_code ret_code;
ret_code = i40e_allocate_dma_mem(hw, &hw->aq.arq.desc_buf,
i40e_mem_arq_ring,
(hw->aq.num_arq_entries *
sizeof(struct i40e_aq_desc)),
I40E_ADMINQ_DESC_ALIGNMENT);
return ret_code;
}
/**
* i40e_free_adminq_asq - Free Admin Queue send rings
* @hw: pointer to the hardware structure
*
* This assumes the posted send buffers have already been cleaned
* and de-allocated
**/
void i40e_free_adminq_asq(struct i40e_hw *hw)
{
i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf);
}
/**
* i40e_free_adminq_arq - Free Admin Queue receive rings
* @hw: pointer to the hardware structure
*
* This assumes the posted receive buffers have already been cleaned
* and de-allocated
**/
void i40e_free_adminq_arq(struct i40e_hw *hw)
{
i40e_free_dma_mem(hw, &hw->aq.arq.desc_buf);
}
/**
* i40e_alloc_arq_bufs - Allocate pre-posted buffers for the receive queue
* @hw: pointer to the hardware structure
**/
static enum i40e_status_code i40e_alloc_arq_bufs(struct i40e_hw *hw)
{
enum i40e_status_code ret_code;
struct i40e_aq_desc *desc;
struct i40e_dma_mem *bi;
int i;
/* We'll be allocating the buffer info memory first, then we can
* allocate the mapped buffers for the event processing
*/
/* buffer_info structures do not need alignment */
ret_code = i40e_allocate_virt_mem(hw, &hw->aq.arq.dma_head,
(hw->aq.num_arq_entries * sizeof(struct i40e_dma_mem)));
if (ret_code)
goto alloc_arq_bufs;
hw->aq.arq.r.arq_bi = (struct i40e_dma_mem *)hw->aq.arq.dma_head.va;
/* allocate the mapped buffers */
for (i = 0; i < hw->aq.num_arq_entries; i++) {
bi = &hw->aq.arq.r.arq_bi[i];
ret_code = i40e_allocate_dma_mem(hw, bi,
i40e_mem_arq_buf,
hw->aq.arq_buf_size,
I40E_ADMINQ_DESC_ALIGNMENT);
if (ret_code)
goto unwind_alloc_arq_bufs;
/* now configure the descriptors for use */
desc = I40E_ADMINQ_DESC(hw->aq.arq, i);
desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_BUF);
if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
desc->flags |= CPU_TO_LE16(I40E_AQ_FLAG_LB);
desc->opcode = 0;
/* This is in accordance with Admin queue design, there is no
* register for buffer size configuration
*/
desc->datalen = CPU_TO_LE16((u16)bi->size);
desc->retval = 0;
desc->cookie_high = 0;
desc->cookie_low = 0;
desc->params.external.addr_high =
CPU_TO_LE32(I40E_HI_DWORD(bi->pa));
desc->params.external.addr_low =
CPU_TO_LE32(I40E_LO_DWORD(bi->pa));
desc->params.external.param0 = 0;
desc->params.external.param1 = 0;
}
alloc_arq_bufs:
return ret_code;
unwind_alloc_arq_bufs:
/* don't try to free the one that failed... */
i--;
for (; i >= 0; i--)
i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
i40e_free_virt_mem(hw, &hw->aq.arq.dma_head);
return ret_code;
}
/**
* i40e_alloc_asq_bufs - Allocate empty buffer structs for the send queue
* @hw: pointer to the hardware structure
**/
static enum i40e_status_code i40e_alloc_asq_bufs(struct i40e_hw *hw)
{
enum i40e_status_code ret_code;
struct i40e_dma_mem *bi;
int i;
/* No mapped memory needed yet, just the buffer info structures */
ret_code = i40e_allocate_virt_mem(hw, &hw->aq.asq.dma_head,
(hw->aq.num_asq_entries * sizeof(struct i40e_dma_mem)));
if (ret_code)
goto alloc_asq_bufs;
hw->aq.asq.r.asq_bi = (struct i40e_dma_mem *)hw->aq.asq.dma_head.va;
/* allocate the mapped buffers */
for (i = 0; i < hw->aq.num_asq_entries; i++) {
bi = &hw->aq.asq.r.asq_bi[i];
ret_code = i40e_allocate_dma_mem(hw, bi,
i40e_mem_asq_buf,
hw->aq.asq_buf_size,
I40E_ADMINQ_DESC_ALIGNMENT);
if (ret_code)
goto unwind_alloc_asq_bufs;
}
alloc_asq_bufs:
return ret_code;
unwind_alloc_asq_bufs:
/* don't try to free the one that failed... */
i--;
for (; i >= 0; i--)
i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
i40e_free_virt_mem(hw, &hw->aq.asq.dma_head);
return ret_code;
}
/**
* i40e_free_arq_bufs - Free receive queue buffer info elements
* @hw: pointer to the hardware structure
**/
static void i40e_free_arq_bufs(struct i40e_hw *hw)
{
int i;
/* free descriptors */
for (i = 0; i < hw->aq.num_arq_entries; i++)
i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
/* free the descriptor memory */
i40e_free_dma_mem(hw, &hw->aq.arq.desc_buf);
/* free the dma header */
i40e_free_virt_mem(hw, &hw->aq.arq.dma_head);
}
/**
* i40e_free_asq_bufs - Free send queue buffer info elements
* @hw: pointer to the hardware structure
**/
static void i40e_free_asq_bufs(struct i40e_hw *hw)
{
int i;
/* only unmap if the address is non-NULL */
for (i = 0; i < hw->aq.num_asq_entries; i++)
if (hw->aq.asq.r.asq_bi[i].pa)
i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
/* free the buffer info list */
i40e_free_virt_mem(hw, &hw->aq.asq.cmd_buf);
/* free the descriptor memory */
i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf);
/* free the dma header */
i40e_free_virt_mem(hw, &hw->aq.asq.dma_head);
}
/**
* i40e_config_asq_regs - configure ASQ registers
* @hw: pointer to the hardware structure
*
* Configure base address and length registers for the transmit queue
**/
static enum i40e_status_code i40e_config_asq_regs(struct i40e_hw *hw)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
u32 reg = 0;
/* Clear Head and Tail */
wr32(hw, hw->aq.asq.head, 0);
wr32(hw, hw->aq.asq.tail, 0);
/* set starting point */
if (!i40e_is_vf(hw))
wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries |
I40E_PF_ATQLEN_ATQENABLE_MASK));
if (i40e_is_vf(hw))
wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries |
I40E_VF_ATQLEN1_ATQENABLE_MASK));
wr32(hw, hw->aq.asq.bal, I40E_LO_DWORD(hw->aq.asq.desc_buf.pa));
wr32(hw, hw->aq.asq.bah, I40E_HI_DWORD(hw->aq.asq.desc_buf.pa));
/* Check one register to verify that config was applied */
reg = rd32(hw, hw->aq.asq.bal);
if (reg != I40E_LO_DWORD(hw->aq.asq.desc_buf.pa))
ret_code = I40E_ERR_ADMIN_QUEUE_ERROR;
return ret_code;
}
/**
* i40e_config_arq_regs - ARQ register configuration
* @hw: pointer to the hardware structure
*
* Configure base address and length registers for the receive (event queue)
**/
static enum i40e_status_code i40e_config_arq_regs(struct i40e_hw *hw)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
u32 reg = 0;
/* Clear Head and Tail */
wr32(hw, hw->aq.arq.head, 0);
wr32(hw, hw->aq.arq.tail, 0);
/* set starting point */
if (!i40e_is_vf(hw))
wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries |
I40E_PF_ARQLEN_ARQENABLE_MASK));
if (i40e_is_vf(hw))
wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries |
I40E_VF_ARQLEN1_ARQENABLE_MASK));
wr32(hw, hw->aq.arq.bal, I40E_LO_DWORD(hw->aq.arq.desc_buf.pa));
wr32(hw, hw->aq.arq.bah, I40E_HI_DWORD(hw->aq.arq.desc_buf.pa));
/* Update tail in the HW to post pre-allocated buffers */
wr32(hw, hw->aq.arq.tail, hw->aq.num_arq_entries - 1);
/* Check one register to verify that config was applied */
reg = rd32(hw, hw->aq.arq.bal);
if (reg != I40E_LO_DWORD(hw->aq.arq.desc_buf.pa))
ret_code = I40E_ERR_ADMIN_QUEUE_ERROR;
return ret_code;
}
/**
* i40e_init_asq - main initialization routine for ASQ
* @hw: pointer to the hardware structure
*
* This is the main initialization routine for the Admin Send Queue
* Prior to calling this function, drivers *MUST* set the following fields
* in the hw->aq structure:
* - hw->aq.num_asq_entries
* - hw->aq.arq_buf_size
*
* Do *NOT* hold the lock when calling this as the memory allocation routines
* called are not going to be atomic context safe
**/
enum i40e_status_code i40e_init_asq(struct i40e_hw *hw)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
if (hw->aq.asq.count > 0) {
/* queue already initialized */
ret_code = I40E_ERR_NOT_READY;
goto init_adminq_exit;
}
/* verify input for valid configuration */
if ((hw->aq.num_asq_entries == 0) ||
(hw->aq.asq_buf_size == 0)) {
ret_code = I40E_ERR_CONFIG;
goto init_adminq_exit;
}
hw->aq.asq.next_to_use = 0;
hw->aq.asq.next_to_clean = 0;
/* allocate the ring memory */
ret_code = i40e_alloc_adminq_asq_ring(hw);
if (ret_code != I40E_SUCCESS)
goto init_adminq_exit;
/* allocate buffers in the rings */
ret_code = i40e_alloc_asq_bufs(hw);
if (ret_code != I40E_SUCCESS)
goto init_adminq_free_rings;
/* initialize base registers */
ret_code = i40e_config_asq_regs(hw);
if (ret_code != I40E_SUCCESS)
goto init_adminq_free_rings;
/* success! */
hw->aq.asq.count = hw->aq.num_asq_entries;
goto init_adminq_exit;
init_adminq_free_rings:
i40e_free_adminq_asq(hw);
init_adminq_exit:
return ret_code;
}
/**
* i40e_init_arq - initialize ARQ
* @hw: pointer to the hardware structure
*
* The main initialization routine for the Admin Receive (Event) Queue.
* Prior to calling this function, drivers *MUST* set the following fields
* in the hw->aq structure:
* - hw->aq.num_asq_entries
* - hw->aq.arq_buf_size
*
* Do *NOT* hold the lock when calling this as the memory allocation routines
* called are not going to be atomic context safe
**/
enum i40e_status_code i40e_init_arq(struct i40e_hw *hw)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
if (hw->aq.arq.count > 0) {
/* queue already initialized */
ret_code = I40E_ERR_NOT_READY;
goto init_adminq_exit;
}
/* verify input for valid configuration */
if ((hw->aq.num_arq_entries == 0) ||
(hw->aq.arq_buf_size == 0)) {
ret_code = I40E_ERR_CONFIG;
goto init_adminq_exit;
}
hw->aq.arq.next_to_use = 0;
hw->aq.arq.next_to_clean = 0;
/* allocate the ring memory */
ret_code = i40e_alloc_adminq_arq_ring(hw);
if (ret_code != I40E_SUCCESS)
goto init_adminq_exit;
/* allocate buffers in the rings */
ret_code = i40e_alloc_arq_bufs(hw);
if (ret_code != I40E_SUCCESS)
goto init_adminq_free_rings;
/* initialize base registers */
ret_code = i40e_config_arq_regs(hw);
if (ret_code != I40E_SUCCESS)
goto init_adminq_free_rings;
/* success! */
hw->aq.arq.count = hw->aq.num_arq_entries;
goto init_adminq_exit;
init_adminq_free_rings:
i40e_free_adminq_arq(hw);
init_adminq_exit:
return ret_code;
}
/**
* i40e_shutdown_asq - shutdown the ASQ
* @hw: pointer to the hardware structure
*
* The main shutdown routine for the Admin Send Queue
**/
enum i40e_status_code i40e_shutdown_asq(struct i40e_hw *hw)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
i40e_acquire_spinlock(&hw->aq.asq_spinlock);
if (hw->aq.asq.count == 0) {
ret_code = I40E_ERR_NOT_READY;
goto shutdown_asq_out;
}
/* Stop firmware AdminQ processing */
wr32(hw, hw->aq.asq.head, 0);
wr32(hw, hw->aq.asq.tail, 0);
wr32(hw, hw->aq.asq.len, 0);
wr32(hw, hw->aq.asq.bal, 0);
wr32(hw, hw->aq.asq.bah, 0);
hw->aq.asq.count = 0; /* to indicate uninitialized queue */
/* free ring buffers */
i40e_free_asq_bufs(hw);
shutdown_asq_out:
i40e_release_spinlock(&hw->aq.asq_spinlock);
return ret_code;
}
/**
* i40e_shutdown_arq - shutdown ARQ
* @hw: pointer to the hardware structure
*
* The main shutdown routine for the Admin Receive Queue
**/
enum i40e_status_code i40e_shutdown_arq(struct i40e_hw *hw)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
i40e_acquire_spinlock(&hw->aq.arq_spinlock);
if (hw->aq.arq.count == 0) {
ret_code = I40E_ERR_NOT_READY;
goto shutdown_arq_out;
}
/* Stop firmware AdminQ processing */
wr32(hw, hw->aq.arq.head, 0);
wr32(hw, hw->aq.arq.tail, 0);
wr32(hw, hw->aq.arq.len, 0);
wr32(hw, hw->aq.arq.bal, 0);
wr32(hw, hw->aq.arq.bah, 0);
hw->aq.arq.count = 0; /* to indicate uninitialized queue */
/* free ring buffers */
i40e_free_arq_bufs(hw);
shutdown_arq_out:
i40e_release_spinlock(&hw->aq.arq_spinlock);
return ret_code;
}
/**
* i40e_resume_aq - resume AQ processing from 0
* @hw: pointer to the hardware structure
**/
static void i40e_resume_aq(struct i40e_hw *hw)
{
/* Registers are reset after PF reset */
hw->aq.asq.next_to_use = 0;
hw->aq.asq.next_to_clean = 0;
i40e_config_asq_regs(hw);
hw->aq.arq.next_to_use = 0;
hw->aq.arq.next_to_clean = 0;
i40e_config_arq_regs(hw);
}
/**
* i40e_init_adminq - main initialization routine for Admin Queue
* @hw: pointer to the hardware structure
*
* Prior to calling this function, drivers *MUST* set the following fields
* in the hw->aq structure:
* - hw->aq.num_asq_entries
* - hw->aq.num_arq_entries
* - hw->aq.arq_buf_size
* - hw->aq.asq_buf_size
**/
enum i40e_status_code i40e_init_adminq(struct i40e_hw *hw)
{
u16 cfg_ptr, oem_hi, oem_lo;
u16 eetrack_lo, eetrack_hi;
enum i40e_status_code ret_code;
int retry = 0;
/* verify input for valid configuration */
if ((hw->aq.num_arq_entries == 0) ||
(hw->aq.num_asq_entries == 0) ||
(hw->aq.arq_buf_size == 0) ||
(hw->aq.asq_buf_size == 0)) {
ret_code = I40E_ERR_CONFIG;
goto init_adminq_exit;
}
i40e_init_spinlock(&hw->aq.asq_spinlock);
i40e_init_spinlock(&hw->aq.arq_spinlock);
/* Set up register offsets */
i40e_adminq_init_regs(hw);
/* setup ASQ command write back timeout */
hw->aq.asq_cmd_timeout = I40E_ASQ_CMD_TIMEOUT;
/* allocate the ASQ */
ret_code = i40e_init_asq(hw);
if (ret_code != I40E_SUCCESS)
goto init_adminq_destroy_spinlocks;
/* allocate the ARQ */
ret_code = i40e_init_arq(hw);
if (ret_code != I40E_SUCCESS)
goto init_adminq_free_asq;
/* VF has no need of firmware */
if (i40e_is_vf(hw))
goto init_adminq_exit;
/* There are some cases where the firmware may not be quite ready
* for AdminQ operations, so we retry the AdminQ setup a few times
* if we see timeouts in this first AQ call.
*/
do {
ret_code = i40e_aq_get_firmware_version(hw,
&hw->aq.fw_maj_ver,
&hw->aq.fw_min_ver,
&hw->aq.fw_build,
&hw->aq.api_maj_ver,
&hw->aq.api_min_ver,
NULL);
if (ret_code != I40E_ERR_ADMIN_QUEUE_TIMEOUT)
break;
retry++;
i40e_msec_delay(100);
i40e_resume_aq(hw);
} while (retry < 10);
if (ret_code != I40E_SUCCESS)
goto init_adminq_free_arq;
/* get the NVM version info */
i40e_read_nvm_word(hw, I40E_SR_NVM_DEV_STARTER_VERSION,
&hw->nvm.version);
i40e_read_nvm_word(hw, I40E_SR_NVM_EETRACK_LO, &eetrack_lo);
i40e_read_nvm_word(hw, I40E_SR_NVM_EETRACK_HI, &eetrack_hi);
hw->nvm.eetrack = (eetrack_hi << 16) | eetrack_lo;
i40e_read_nvm_word(hw, I40E_SR_BOOT_CONFIG_PTR, &cfg_ptr);
i40e_read_nvm_word(hw, (cfg_ptr + I40E_NVM_OEM_VER_OFF),
&oem_hi);
i40e_read_nvm_word(hw, (cfg_ptr + (I40E_NVM_OEM_VER_OFF + 1)),
&oem_lo);
hw->nvm.oem_ver = ((u32)oem_hi << 16) | oem_lo;
/* The ability to RX (not drop) 802.1ad frames was added in API 1.7 */
if ((hw->aq.api_maj_ver > 1) ||
((hw->aq.api_maj_ver == 1) &&
(hw->aq.api_min_ver >= 7)))
hw->flags |= I40E_HW_FLAG_802_1AD_CAPABLE;
if (hw->mac.type == I40E_MAC_XL710 &&
hw->aq.api_maj_ver == I40E_FW_API_VERSION_MAJOR &&
hw->aq.api_min_ver >= I40E_MINOR_VER_GET_LINK_INFO_XL710) {
hw->flags |= I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE;
}
/* Newer versions of firmware require lock when reading the NVM */
if ((hw->aq.api_maj_ver > 1) ||
((hw->aq.api_maj_ver == 1) &&
(hw->aq.api_min_ver >= 5)))
hw->flags |= I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK;
if (hw->aq.api_maj_ver > I40E_FW_API_VERSION_MAJOR) {
ret_code = I40E_ERR_FIRMWARE_API_VERSION;
goto init_adminq_free_arq;
}
/* pre-emptive resource lock release */
i40e_aq_release_resource(hw, I40E_NVM_RESOURCE_ID, 0, NULL);
hw->nvm_release_on_done = FALSE;
hw->nvmupd_state = I40E_NVMUPD_STATE_INIT;
ret_code = I40E_SUCCESS;
/* success! */
goto init_adminq_exit;
init_adminq_free_arq:
i40e_shutdown_arq(hw);
init_adminq_free_asq:
i40e_shutdown_asq(hw);
init_adminq_destroy_spinlocks:
i40e_destroy_spinlock(&hw->aq.asq_spinlock);
i40e_destroy_spinlock(&hw->aq.arq_spinlock);
init_adminq_exit:
return ret_code;
}
/**
* i40e_shutdown_adminq - shutdown routine for the Admin Queue
* @hw: pointer to the hardware structure
**/
enum i40e_status_code i40e_shutdown_adminq(struct i40e_hw *hw)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
if (i40e_check_asq_alive(hw))
i40e_aq_queue_shutdown(hw, TRUE);
i40e_shutdown_asq(hw);
i40e_shutdown_arq(hw);
i40e_destroy_spinlock(&hw->aq.asq_spinlock);
i40e_destroy_spinlock(&hw->aq.arq_spinlock);
if (hw->nvm_buff.va)
i40e_free_virt_mem(hw, &hw->nvm_buff);
return ret_code;
}
/**
* i40e_clean_asq - cleans Admin send queue
* @hw: pointer to the hardware structure
*
* returns the number of free desc
**/
u16 i40e_clean_asq(struct i40e_hw *hw)
{
struct i40e_adminq_ring *asq = &(hw->aq.asq);
struct i40e_asq_cmd_details *details;
u16 ntc = asq->next_to_clean;
struct i40e_aq_desc desc_cb;
struct i40e_aq_desc *desc;
desc = I40E_ADMINQ_DESC(*asq, ntc);
details = I40E_ADMINQ_DETAILS(*asq, ntc);
while (rd32(hw, hw->aq.asq.head) != ntc) {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"ntc %d head %d.\n", ntc, rd32(hw, hw->aq.asq.head));
if (details->callback) {
I40E_ADMINQ_CALLBACK cb_func =
(I40E_ADMINQ_CALLBACK)details->callback;
i40e_memcpy(&desc_cb, desc, sizeof(struct i40e_aq_desc),
I40E_DMA_TO_DMA);
cb_func(hw, &desc_cb);
}
i40e_memset(desc, 0, sizeof(*desc), I40E_DMA_MEM);
i40e_memset(details, 0, sizeof(*details), I40E_NONDMA_MEM);
ntc++;
if (ntc == asq->count)
ntc = 0;
desc = I40E_ADMINQ_DESC(*asq, ntc);
details = I40E_ADMINQ_DETAILS(*asq, ntc);
}
asq->next_to_clean = ntc;
return I40E_DESC_UNUSED(asq);
}
/**
* i40e_asq_done - check if FW has processed the Admin Send Queue
* @hw: pointer to the hw struct
*
* Returns TRUE if the firmware has processed all descriptors on the
* admin send queue. Returns FALSE if there are still requests pending.
**/
bool i40e_asq_done(struct i40e_hw *hw)
{
/* AQ designers suggest use of head for better
* timing reliability than DD bit
*/
return rd32(hw, hw->aq.asq.head) == hw->aq.asq.next_to_use;
}
/**
* i40e_asq_send_command - send command to Admin Queue
* @hw: pointer to the hw struct
* @desc: prefilled descriptor describing the command (non DMA mem)
* @buff: buffer to use for indirect commands
* @buff_size: size of buffer for indirect commands
* @cmd_details: pointer to command details structure
*
* This is the main send command driver routine for the Admin Queue send
* queue. It runs the queue, cleans the queue, etc
**/
enum i40e_status_code i40e_asq_send_command(struct i40e_hw *hw,
struct i40e_aq_desc *desc,
void *buff, /* can be NULL */
u16 buff_size,
struct i40e_asq_cmd_details *cmd_details)
{
enum i40e_status_code status = I40E_SUCCESS;
struct i40e_dma_mem *dma_buff = NULL;
struct i40e_asq_cmd_details *details;
struct i40e_aq_desc *desc_on_ring;
bool cmd_completed = FALSE;
u16 retval = 0;
u32 val = 0;
i40e_acquire_spinlock(&hw->aq.asq_spinlock);
hw->aq.asq_last_status = I40E_AQ_RC_OK;
if (hw->aq.asq.count == 0) {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: Admin queue not initialized.\n");
status = I40E_ERR_QUEUE_EMPTY;
goto asq_send_command_error;
}
val = rd32(hw, hw->aq.asq.head);
if (val >= hw->aq.num_asq_entries) {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: head overrun at %d\n", val);
status = I40E_ERR_QUEUE_EMPTY;
goto asq_send_command_error;
}
details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use);
if (cmd_details) {
i40e_memcpy(details,
cmd_details,
sizeof(struct i40e_asq_cmd_details),
I40E_NONDMA_TO_NONDMA);
/* If the cmd_details are defined copy the cookie. The
* CPU_TO_LE32 is not needed here because the data is ignored
* by the FW, only used by the driver
*/
if (details->cookie) {
desc->cookie_high =
CPU_TO_LE32(I40E_HI_DWORD(details->cookie));
desc->cookie_low =
CPU_TO_LE32(I40E_LO_DWORD(details->cookie));
}
} else {
i40e_memset(details, 0,
sizeof(struct i40e_asq_cmd_details),
I40E_NONDMA_MEM);
}
/* clear requested flags and then set additional flags if defined */
desc->flags &= ~CPU_TO_LE16(details->flags_dis);
desc->flags |= CPU_TO_LE16(details->flags_ena);
if (buff_size > hw->aq.asq_buf_size) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Invalid buffer size: %d.\n",
buff_size);
status = I40E_ERR_INVALID_SIZE;
goto asq_send_command_error;
}
if (details->postpone && !details->async) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Async flag not set along with postpone flag");
status = I40E_ERR_PARAM;
goto asq_send_command_error;
}
/* call clean and check queue available function to reclaim the
* descriptors that were processed by FW, the function returns the
* number of desc available
*/
/* the clean function called here could be called in a separate thread
* in case of asynchronous completions
*/
if (i40e_clean_asq(hw) == 0) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Error queue is full.\n");
status = I40E_ERR_ADMIN_QUEUE_FULL;
goto asq_send_command_error;
}
/* initialize the temp desc pointer with the right desc */
desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use);
/* if the desc is available copy the temp desc to the right place */
i40e_memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc),
I40E_NONDMA_TO_DMA);
/* if buff is not NULL assume indirect command */
if (buff != NULL) {
dma_buff = &(hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use]);
/* copy the user buff into the respective DMA buff */
i40e_memcpy(dma_buff->va, buff, buff_size,
I40E_NONDMA_TO_DMA);
desc_on_ring->datalen = CPU_TO_LE16(buff_size);
/* Update the address values in the desc with the pa value
* for respective buffer
*/
desc_on_ring->params.external.addr_high =
CPU_TO_LE32(I40E_HI_DWORD(dma_buff->pa));
desc_on_ring->params.external.addr_low =
CPU_TO_LE32(I40E_LO_DWORD(dma_buff->pa));
}
/* bump the tail */
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: desc and buffer:\n");
i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring,
buff, buff_size);
(hw->aq.asq.next_to_use)++;
if (hw->aq.asq.next_to_use == hw->aq.asq.count)
hw->aq.asq.next_to_use = 0;
if (!details->postpone)
wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use);
/* if cmd_details are not defined or async flag is not set,
* we need to wait for desc write back
*/
if (!details->async && !details->postpone) {
u32 total_delay = 0;
do {
/* AQ designers suggest use of head for better
* timing reliability than DD bit
*/
if (i40e_asq_done(hw))
break;
i40e_usec_delay(50);
total_delay += 50;
} while (total_delay < hw->aq.asq_cmd_timeout);
}
/* if ready, copy the desc back to temp */
if (i40e_asq_done(hw)) {
i40e_memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc),
I40E_DMA_TO_NONDMA);
if (buff != NULL)
i40e_memcpy(buff, dma_buff->va, buff_size,
I40E_DMA_TO_NONDMA);
retval = LE16_TO_CPU(desc->retval);
if (retval != 0) {
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQTX: Command completed with error 0x%X.\n",
retval);
/* strip off FW internal code */
retval &= 0xff;
}
cmd_completed = TRUE;
if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK)
status = I40E_SUCCESS;
else
status = I40E_ERR_ADMIN_QUEUE_ERROR;
hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval;
}
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: desc and buffer writeback:\n");
i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff, buff_size);
/* save writeback aq if requested */
if (details->wb_desc)
i40e_memcpy(details->wb_desc, desc_on_ring,
sizeof(struct i40e_aq_desc), I40E_DMA_TO_NONDMA);
/* update the error if time out occurred */
if ((!cmd_completed) &&
(!details->async && !details->postpone)) {
if (rd32(hw, hw->aq.asq.len) & I40E_GL_ATQLEN_ATQCRIT_MASK) {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: AQ Critical error.\n");
status = I40E_ERR_ADMIN_QUEUE_CRITICAL_ERROR;
} else {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQTX: Writeback timeout.\n");
status = I40E_ERR_ADMIN_QUEUE_TIMEOUT;
}
}
asq_send_command_error:
i40e_release_spinlock(&hw->aq.asq_spinlock);
return status;
}
/**
* i40e_fill_default_direct_cmd_desc - AQ descriptor helper function
* @desc: pointer to the temp descriptor (non DMA mem)
* @opcode: the opcode can be used to decide which flags to turn off or on
*
* Fill the desc with default values
**/
void i40e_fill_default_direct_cmd_desc(struct i40e_aq_desc *desc,
u16 opcode)
{
/* zero out the desc */
i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc),
I40E_NONDMA_MEM);
desc->opcode = CPU_TO_LE16(opcode);
desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_SI);
}
/**
* i40e_clean_arq_element
* @hw: pointer to the hw struct
* @e: event info from the receive descriptor, includes any buffers
* @pending: number of events that could be left to process
*
* This function cleans one Admin Receive Queue element and returns
* the contents through e. It can also return how many events are
* left to process through 'pending'
**/
enum i40e_status_code i40e_clean_arq_element(struct i40e_hw *hw,
struct i40e_arq_event_info *e,
u16 *pending)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
u16 ntc = hw->aq.arq.next_to_clean;
struct i40e_aq_desc *desc;
struct i40e_dma_mem *bi;
u16 desc_idx;
u16 datalen;
u16 flags;
u16 ntu;
/* pre-clean the event info */
i40e_memset(&e->desc, 0, sizeof(e->desc), I40E_NONDMA_MEM);
/* take the lock before we start messing with the ring */
i40e_acquire_spinlock(&hw->aq.arq_spinlock);
if (hw->aq.arq.count == 0) {
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
"AQRX: Admin queue not initialized.\n");
ret_code = I40E_ERR_QUEUE_EMPTY;
goto clean_arq_element_err;
}
/* set next_to_use to head */
if (!i40e_is_vf(hw))
ntu = rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK;
else
ntu = rd32(hw, hw->aq.arq.head) & I40E_VF_ARQH1_ARQH_MASK;
if (ntu == ntc) {
/* nothing to do - shouldn't need to update ring's values */
ret_code = I40E_ERR_ADMIN_QUEUE_NO_WORK;
goto clean_arq_element_out;
}
/* now clean the next descriptor */
desc = I40E_ADMINQ_DESC(hw->aq.arq, ntc);
desc_idx = ntc;
hw->aq.arq_last_status =
(enum i40e_admin_queue_err)LE16_TO_CPU(desc->retval);
flags = LE16_TO_CPU(desc->flags);
if (flags & I40E_AQ_FLAG_ERR) {
ret_code = I40E_ERR_ADMIN_QUEUE_ERROR;
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
"AQRX: Event received with error 0x%X.\n",
hw->aq.arq_last_status);
}
i40e_memcpy(&e->desc, desc, sizeof(struct i40e_aq_desc),
I40E_DMA_TO_NONDMA);
datalen = LE16_TO_CPU(desc->datalen);
e->msg_len = min(datalen, e->buf_len);
if (e->msg_buf != NULL && (e->msg_len != 0))
i40e_memcpy(e->msg_buf,
hw->aq.arq.r.arq_bi[desc_idx].va,
e->msg_len, I40E_DMA_TO_NONDMA);
i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQRX: desc and buffer:\n");
i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf,
hw->aq.arq_buf_size);
/* Restore the original datalen and buffer address in the desc,
* FW updates datalen to indicate the event message
* size
*/
bi = &hw->aq.arq.r.arq_bi[ntc];
i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc), I40E_DMA_MEM);
desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_BUF);
if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
desc->flags |= CPU_TO_LE16(I40E_AQ_FLAG_LB);
desc->datalen = CPU_TO_LE16((u16)bi->size);
desc->params.external.addr_high = CPU_TO_LE32(I40E_HI_DWORD(bi->pa));
desc->params.external.addr_low = CPU_TO_LE32(I40E_LO_DWORD(bi->pa));
/* set tail = the last cleaned desc index. */
wr32(hw, hw->aq.arq.tail, ntc);
/* ntc is updated to tail + 1 */
ntc++;
if (ntc == hw->aq.num_arq_entries)
ntc = 0;
hw->aq.arq.next_to_clean = ntc;
hw->aq.arq.next_to_use = ntu;
i40e_nvmupd_check_wait_event(hw, LE16_TO_CPU(e->desc.opcode), &e->desc);
clean_arq_element_out:
/* Set pending if needed, unlock and return */
if (pending != NULL)
*pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
clean_arq_element_err:
i40e_release_spinlock(&hw->aq.arq_spinlock);
return ret_code;
}
Reference in New Issue View Git Blame Copy Permalink