freebsd-skq/sys/kern/subr_compressor.c
Eric van Gyzen 3cd1f28e4a clamp kernel dump compression level when using gzip
If the configured compression level for kernel dumps
it outside the supported range, clamp it to the closest
supported level.  Previously, dumpon would fail.

zstd already does this internally, so the compressor
needs no change.

Reviewed by:	cem markj
MFC after:	2 weeks
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D23765
2020-02-20 23:53:48 +00:00

566 lines
13 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2014, 2017 Mark Johnston <markj@FreeBSD.org>
* Copyright (c) 2017 Conrad Meyer <cem@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Subroutines used for writing compressed user process and kernel core dumps.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_gzio.h"
#include "opt_zstdio.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/compressor.h>
#include <sys/kernel.h>
#include <sys/linker_set.h>
#include <sys/malloc.h>
MALLOC_DEFINE(M_COMPRESS, "compressor", "kernel compression subroutines");
struct compressor_methods {
int format;
void *(* const init)(size_t, int);
void (* const reset)(void *);
int (* const write)(void *, void *, size_t, compressor_cb_t, void *);
void (* const fini)(void *);
};
struct compressor {
const struct compressor_methods *methods;
compressor_cb_t cb;
void *priv;
void *arg;
};
SET_DECLARE(compressors, struct compressor_methods);
#ifdef GZIO
#include <contrib/zlib/zutil.h>
struct gz_stream {
uint8_t *gz_buffer; /* output buffer */
size_t gz_bufsz; /* output buffer size */
off_t gz_off; /* offset into the output stream */
uint32_t gz_crc; /* stream CRC32 */
z_stream gz_stream; /* zlib state */
};
static void *gz_init(size_t maxiosize, int level);
static void gz_reset(void *stream);
static int gz_write(void *stream, void *data, size_t len, compressor_cb_t,
void *);
static void gz_fini(void *stream);
static void *
gz_alloc(void *arg __unused, u_int n, u_int sz)
{
/*
* Memory for zlib state is allocated using M_NODUMP since it may be
* used to compress a kernel dump, and we don't want zlib to attempt to
* compress its own state.
*/
return (malloc(n * sz, M_COMPRESS, M_WAITOK | M_ZERO | M_NODUMP));
}
static void
gz_free(void *arg __unused, void *ptr)
{
free(ptr, M_COMPRESS);
}
static void *
gz_init(size_t maxiosize, int level)
{
struct gz_stream *s;
int error;
s = gz_alloc(NULL, 1, roundup2(sizeof(*s), PAGE_SIZE));
s->gz_buffer = gz_alloc(NULL, 1, maxiosize);
s->gz_bufsz = maxiosize;
s->gz_stream.zalloc = gz_alloc;
s->gz_stream.zfree = gz_free;
s->gz_stream.opaque = NULL;
s->gz_stream.next_in = Z_NULL;
s->gz_stream.avail_in = 0;
if (level != Z_DEFAULT_COMPRESSION) {
if (level < Z_BEST_SPEED)
level = Z_BEST_SPEED;
else if (level > Z_BEST_COMPRESSION)
level = Z_BEST_COMPRESSION;
}
error = deflateInit2(&s->gz_stream, level, Z_DEFLATED, -MAX_WBITS,
DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY);
if (error != 0)
goto fail;
gz_reset(s);
return (s);
fail:
gz_free(NULL, s);
return (NULL);
}
static void
gz_reset(void *stream)
{
struct gz_stream *s;
uint8_t *hdr;
const size_t hdrlen = 10;
s = stream;
s->gz_off = 0;
s->gz_crc = crc32(0L, Z_NULL, 0);
(void)deflateReset(&s->gz_stream);
s->gz_stream.avail_out = s->gz_bufsz;
s->gz_stream.next_out = s->gz_buffer;
/* Write the gzip header to the output buffer. */
hdr = s->gz_buffer;
memset(hdr, 0, hdrlen);
hdr[0] = 0x1f;
hdr[1] = 0x8b;
hdr[2] = Z_DEFLATED;
hdr[9] = OS_CODE;
s->gz_stream.next_out += hdrlen;
s->gz_stream.avail_out -= hdrlen;
}
static int
gz_write(void *stream, void *data, size_t len, compressor_cb_t cb,
void *arg)
{
struct gz_stream *s;
uint8_t trailer[8];
size_t room;
int error, zerror, zflag;
s = stream;
zflag = data == NULL ? Z_FINISH : Z_NO_FLUSH;
if (len > 0) {
s->gz_stream.avail_in = len;
s->gz_stream.next_in = data;
s->gz_crc = crc32(s->gz_crc, data, len);
}
error = 0;
do {
zerror = deflate(&s->gz_stream, zflag);
if (zerror != Z_OK && zerror != Z_STREAM_END) {
error = EIO;
break;
}
if (s->gz_stream.avail_out == 0 || zerror == Z_STREAM_END) {
/*
* Our output buffer is full or there's nothing left
* to produce, so we're flushing the buffer.
*/
len = s->gz_bufsz - s->gz_stream.avail_out;
if (zerror == Z_STREAM_END) {
/*
* Try to pack as much of the trailer into the
* output buffer as we can.
*/
((uint32_t *)trailer)[0] = s->gz_crc;
((uint32_t *)trailer)[1] =
s->gz_stream.total_in;
room = MIN(sizeof(trailer),
s->gz_bufsz - len);
memcpy(s->gz_buffer + len, trailer, room);
len += room;
}
error = cb(s->gz_buffer, len, s->gz_off, arg);
if (error != 0)
break;
s->gz_off += len;
s->gz_stream.next_out = s->gz_buffer;
s->gz_stream.avail_out = s->gz_bufsz;
/*
* If we couldn't pack the trailer into the output
* buffer, write it out now.
*/
if (zerror == Z_STREAM_END && room < sizeof(trailer))
error = cb(trailer + room,
sizeof(trailer) - room, s->gz_off, arg);
}
} while (zerror != Z_STREAM_END &&
(zflag == Z_FINISH || s->gz_stream.avail_in > 0));
return (error);
}
static void
gz_fini(void *stream)
{
struct gz_stream *s;
s = stream;
(void)deflateEnd(&s->gz_stream);
gz_free(NULL, s->gz_buffer);
gz_free(NULL, s);
}
struct compressor_methods gzip_methods = {
.format = COMPRESS_GZIP,
.init = gz_init,
.reset = gz_reset,
.write = gz_write,
.fini = gz_fini,
};
DATA_SET(compressors, gzip_methods);
#endif /* GZIO */
#ifdef ZSTDIO
#define ZSTD_STATIC_LINKING_ONLY
#include <contrib/zstd/lib/zstd.h>
struct zstdio_stream {
ZSTD_CCtx *zst_stream;
ZSTD_inBuffer zst_inbuffer;
ZSTD_outBuffer zst_outbuffer;
uint8_t * zst_buffer; /* output buffer */
size_t zst_maxiosz; /* Max output IO size */
off_t zst_off; /* offset into the output stream */
void * zst_static_wkspc;
};
static void *zstdio_init(size_t maxiosize, int level);
static void zstdio_reset(void *stream);
static int zstdio_write(void *stream, void *data, size_t len,
compressor_cb_t, void *);
static void zstdio_fini(void *stream);
static void *
zstdio_init(size_t maxiosize, int level)
{
ZSTD_CCtx *dump_compressor;
struct zstdio_stream *s;
void *wkspc, *owkspc, *buffer;
size_t wkspc_size, buf_size, rc;
s = NULL;
wkspc_size = ZSTD_estimateCStreamSize(level);
owkspc = wkspc = malloc(wkspc_size + 8, M_COMPRESS,
M_WAITOK | M_NODUMP);
/* Zstd API requires 8-byte alignment. */
if ((uintptr_t)wkspc % 8 != 0)
wkspc = (void *)roundup2((uintptr_t)wkspc, 8);
dump_compressor = ZSTD_initStaticCCtx(wkspc, wkspc_size);
if (dump_compressor == NULL) {
printf("%s: workspace too small.\n", __func__);
goto out;
}
rc = ZSTD_CCtx_setParameter(dump_compressor, ZSTD_c_checksumFlag, 1);
if (ZSTD_isError(rc)) {
printf("%s: error setting checksumFlag: %s\n", __func__,
ZSTD_getErrorName(rc));
goto out;
}
rc = ZSTD_CCtx_setParameter(dump_compressor, ZSTD_c_compressionLevel,
level);
if (ZSTD_isError(rc)) {
printf("%s: error setting compressLevel: %s\n", __func__,
ZSTD_getErrorName(rc));
goto out;
}
buf_size = ZSTD_CStreamOutSize() * 2;
buffer = malloc(buf_size, M_COMPRESS, M_WAITOK | M_NODUMP);
s = malloc(sizeof(*s), M_COMPRESS, M_NODUMP | M_WAITOK);
s->zst_buffer = buffer;
s->zst_outbuffer.dst = buffer;
s->zst_outbuffer.size = buf_size;
s->zst_maxiosz = maxiosize;
s->zst_stream = dump_compressor;
s->zst_static_wkspc = owkspc;
zstdio_reset(s);
out:
if (s == NULL)
free(owkspc, M_COMPRESS);
return (s);
}
static void
zstdio_reset(void *stream)
{
struct zstdio_stream *s;
size_t res;
s = stream;
res = ZSTD_resetCStream(s->zst_stream, 0);
if (ZSTD_isError(res))
panic("%s: could not reset stream %p: %s\n", __func__, s,
ZSTD_getErrorName(res));
s->zst_off = 0;
s->zst_inbuffer.src = NULL;
s->zst_inbuffer.size = 0;
s->zst_inbuffer.pos = 0;
s->zst_outbuffer.pos = 0;
}
static int
zst_flush_intermediate(struct zstdio_stream *s, compressor_cb_t cb, void *arg)
{
size_t bytes_to_dump;
int error;
/* Flush as many full output blocks as possible. */
/* XXX: 4096 is arbitrary safe HDD block size for kernel dumps */
while (s->zst_outbuffer.pos >= 4096) {
bytes_to_dump = rounddown(s->zst_outbuffer.pos, 4096);
if (bytes_to_dump > s->zst_maxiosz)
bytes_to_dump = s->zst_maxiosz;
error = cb(s->zst_buffer, bytes_to_dump, s->zst_off, arg);
if (error != 0)
return (error);
/*
* Shift any non-full blocks up to the front of the output
* buffer.
*/
s->zst_outbuffer.pos -= bytes_to_dump;
memmove(s->zst_outbuffer.dst,
(char *)s->zst_outbuffer.dst + bytes_to_dump,
s->zst_outbuffer.pos);
s->zst_off += bytes_to_dump;
}
return (0);
}
static int
zstdio_flush(struct zstdio_stream *s, compressor_cb_t cb, void *arg)
{
size_t rc, lastpos;
int error;
/*
* Positive return indicates unflushed data remaining; need to call
* endStream again after clearing out room in output buffer.
*/
rc = 1;
lastpos = s->zst_outbuffer.pos;
while (rc > 0) {
rc = ZSTD_endStream(s->zst_stream, &s->zst_outbuffer);
if (ZSTD_isError(rc)) {
printf("%s: ZSTD_endStream failed (%s)\n", __func__,
ZSTD_getErrorName(rc));
return (EIO);
}
if (lastpos == s->zst_outbuffer.pos) {
printf("%s: did not make forward progress endStream %zu\n",
__func__, lastpos);
return (EIO);
}
error = zst_flush_intermediate(s, cb, arg);
if (error != 0)
return (error);
lastpos = s->zst_outbuffer.pos;
}
/*
* We've already done an intermediate flush, so all full blocks have
* been written. Only a partial block remains. Padding happens in a
* higher layer.
*/
if (s->zst_outbuffer.pos != 0) {
error = cb(s->zst_buffer, s->zst_outbuffer.pos, s->zst_off,
arg);
if (error != 0)
return (error);
}
return (0);
}
static int
zstdio_write(void *stream, void *data, size_t len, compressor_cb_t cb,
void *arg)
{
struct zstdio_stream *s;
size_t lastpos, rc;
int error;
s = stream;
if (data == NULL)
return (zstdio_flush(s, cb, arg));
s->zst_inbuffer.src = data;
s->zst_inbuffer.size = len;
s->zst_inbuffer.pos = 0;
lastpos = 0;
while (s->zst_inbuffer.pos < s->zst_inbuffer.size) {
rc = ZSTD_compressStream(s->zst_stream, &s->zst_outbuffer,
&s->zst_inbuffer);
if (ZSTD_isError(rc)) {
printf("%s: Compress failed on %p! (%s)\n",
__func__, data, ZSTD_getErrorName(rc));
return (EIO);
}
if (lastpos == s->zst_inbuffer.pos) {
/*
* XXX: May need flushStream to make forward progress
*/
printf("ZSTD: did not make forward progress @pos %zu\n",
lastpos);
return (EIO);
}
lastpos = s->zst_inbuffer.pos;
error = zst_flush_intermediate(s, cb, arg);
if (error != 0)
return (error);
}
return (0);
}
static void
zstdio_fini(void *stream)
{
struct zstdio_stream *s;
s = stream;
if (s->zst_static_wkspc != NULL)
free(s->zst_static_wkspc, M_COMPRESS);
else
ZSTD_freeCCtx(s->zst_stream);
free(s->zst_buffer, M_COMPRESS);
free(s, M_COMPRESS);
}
static struct compressor_methods zstd_methods = {
.format = COMPRESS_ZSTD,
.init = zstdio_init,
.reset = zstdio_reset,
.write = zstdio_write,
.fini = zstdio_fini,
};
DATA_SET(compressors, zstd_methods);
#endif /* ZSTDIO */
bool
compressor_avail(int format)
{
struct compressor_methods **iter;
SET_FOREACH(iter, compressors) {
if ((*iter)->format == format)
return (true);
}
return (false);
}
struct compressor *
compressor_init(compressor_cb_t cb, int format, size_t maxiosize, int level,
void *arg)
{
struct compressor_methods **iter;
struct compressor *s;
void *priv;
SET_FOREACH(iter, compressors) {
if ((*iter)->format == format)
break;
}
if (iter == SET_LIMIT(compressors))
return (NULL);
priv = (*iter)->init(maxiosize, level);
if (priv == NULL)
return (NULL);
s = malloc(sizeof(*s), M_COMPRESS, M_WAITOK | M_ZERO);
s->methods = (*iter);
s->priv = priv;
s->cb = cb;
s->arg = arg;
return (s);
}
void
compressor_reset(struct compressor *stream)
{
stream->methods->reset(stream->priv);
}
int
compressor_write(struct compressor *stream, void *data, size_t len)
{
return (stream->methods->write(stream->priv, data, len, stream->cb,
stream->arg));
}
int
compressor_flush(struct compressor *stream)
{
return (stream->methods->write(stream->priv, NULL, 0, stream->cb,
stream->arg));
}
void
compressor_fini(struct compressor *stream)
{
stream->methods->fini(stream->priv);
}