Peter Wemm 269a49497f Remove #include "wd.h" and #if NWDC > 0 as that's always true as this ...

file is 'optional wdc'  (note wd.h has both NWDC and NWD in it because
of config quirks)

2000-01-29 16:59:53 +00:00

..

adw_pci.c

…

alpm.c

…

amd.c

The error status for a scsi status error is "CAM_SCSI_STATUS_ERROR", not 0.

2000-01-14 03:39:30 +00:00

amd.h

…

cy_pci.c

…

cy_pcireg.h

…

dc21040reg.h

…

ida_pci.c

…

ide_pci.c

Remove #include "wd.h" and #if NWDC > 0 as that's always true as this

2000-01-29 16:59:53 +00:00

ide_pcireg.h

…

if_ar_p.c

…

if_dc.c

Add support for DM9102A boards with Davicom DM9801 HomePNA PHYs.

2000-01-24 17:19:37 +00:00

if_dcreg.h

Add support for the Davicom DM9102A 10/100 ethernet controller chip.

2000-01-19 19:03:08 +00:00

if_de.c

…

if_devar.h

…

if_en_pci.c

…

if_fxp.c

…

if_fxpreg.h

…

if_fxpvar.h

…

if_lnc_p.c

…

if_mn.c

Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"

1999-12-29 05:07:58 +00:00

if_rl.c

Fix a small typo in the comments.

1999-12-28 06:04:29 +00:00

if_rlreg.h

…

if_sf.c

Modify the Adaptec "starfire" driver to reset the PHY on the MII bus

1999-12-05 20:02:45 +00:00

if_sfreg.h

Modify the Adaptec "starfire" driver to reset the PHY on the MII bus

1999-12-05 20:02:45 +00:00

if_sis.c

…

if_sisreg.h

…

if_sk.c

…

if_skreg.h

…

if_sr_p.c

…

if_ste.c

Spruce up the Sundance ST201 driver:

1999-12-07 20:14:42 +00:00

if_stereg.h

Spruce up the Sundance ST201 driver:

1999-12-07 20:14:42 +00:00

if_ti.c

Add the vendor/device ID for the Farallon PN9000SX gigabit ethernet

2000-01-18 00:26:29 +00:00

if_tireg.h

Add the vendor/device ID for the Farallon PN9000SX gigabit ethernet

2000-01-18 00:26:29 +00:00

if_tl.c

Fix the tl driver so it doesn't run off the end of the RX descriptor list

2000-01-15 20:14:49 +00:00

if_tlreg.h

…

if_tx.c

Change incorrect NULLs to 0s

1999-12-21 11:14:12 +00:00

if_txvar.h

…

if_vr.c

…

if_vrreg.h

…

if_wb.c

…

if_wbreg.h

…

if_wx.c

put things in place for jumbograms

2000-01-25 06:09:53 +00:00

if_wxreg.h

define jumbo packet size

2000-01-25 04:11:33 +00:00

if_wxvar.h

add PREVIOUS index macro for transmit side

2000-01-23 03:18:14 +00:00

if_xl.c

Close PR# 15986: issue an RX reset command when initializing the interface,

2000-01-09 21:12:59 +00:00

if_xlreg.h

Update the xl driver to recognize yet another 3c905B/3c905C class NIC:

1999-12-16 18:33:57 +00:00

intpm.c

…

intpmreg.h

…

isp_pci.c

Remove compile warning not seen when compiling with target mode enabled.

2000-01-15 07:06:44 +00:00

locate.pl

…

meteor_reg.h

…

meteor.c

…

ncr.c

Add 53C895A and 53C1510D device description to the ncr chip table.

2000-01-23 12:27:49 +00:00

ncrreg.h

…

ohci_pci.c

Properly teardown the allocated and initialised stuff when an error

2000-01-26 10:52:27 +00:00

pccbb.c

…

pccbbreg.h

…

pccbbvar.h

…

pci_compat.c

Zap pci_map_dense() and pci_map_bwx() - they were for compatability but

2000-01-05 16:40:10 +00:00

pci_if.m

…

pci.c

Put a FYI in the compatability shims so that people are aware that they

2000-01-29 15:37:36 +00:00

pcic_p.c

Fill in the blanks for some of the Texas Instruments cardbus controllers.

1999-12-31 07:22:24 +00:00

pcic_p.h

Fill in the blanks for some of the Texas Instruments cardbus controllers.

1999-12-31 07:22:24 +00:00

pcireg.h

Added PCIR_BIOS (0x30).

2000-01-10 12:53:19 +00:00

pcisupport.c

Add more PCI VGA graphics card descriptions.

2000-01-27 12:02:06 +00:00

pcivar.h

Clean up the cfgmech/pci_mechanism debris. The reason for the existance

2000-01-08 08:31:24 +00:00

scsiiom.c

…

simos.c

…

simos.h

…

ti_fw2.h

…

ti_fw.h

…

uhci_pci.c

Properly teardown the allocated and initialised stuff when an error

2000-01-26 10:52:27 +00:00

xmaciireg.h

…

xrpu.c

…