d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1c800dbdb5
freebsd-skq/sys/net/if_iso88025subr.c
julian 1dfc5c98a4 Add code to allow the system to handle multiple routing tables. 
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)

Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.

From my notes:

-----

  One thing where FreeBSD has been falling behind, and which by chance I
  have some time to work on is "policy based routing", which allows
  different
  packet streams to be routed by more than just the destination address.

  Constraints:
  ------------

  I want to make some form of this available in the 6.x tree
  (and by extension 7.x) , but FreeBSD in general needs it so I might as
  well do it in -current and back port the portions I need.

  One of the ways that this can be done is to have the ability to
  instantiate multiple kernel routing tables (which I will now
  refer to as "Forwarding Information Bases" or "FIBs" for political
  correctness reasons). Which FIB a particular packet uses to make
  the next hop decision can be decided by a number of mechanisms.
  The policies these mechanisms implement are the "Policies" referred
  to in "Policy based routing".

  One of the constraints I have if I try to back port this work to
  6.x is that it must be implemented as a EXTENSION to the existing
  ABIs in 6.x so that third party applications do not need to be
  recompiled in timespan of the branch.

  This first version will not have some of the bells and whistles that
  will come with later versions. It will, for example, be limited to 16
  tables in the first commit.
  Implementation method, Compatible version. (part 1)
  -------------------------------
  For this reason I have implemented a "sufficient subset" of a
  multiple routing table solution in Perforce, and back-ported it
  to 6.x. (also in Perforce though not  always caught up with what I
  have done in -current/P4). The subset allows a number of FIBs
  to be defined at compile time (8 is sufficient for my purposes in 6.x)
  and implements the changes needed to allow IPV4 to use them. I have not
  done the changes for ipv6 simply because I do not need it, and I do not
  have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.

  Other protocol families are left untouched and should there be
  users with proprietary protocol families, they should continue to work
  and be oblivious to the existence of the extra FIBs.

  To understand how this is done, one must know that the current FIB
  code starts everything off with a single dimensional array of
  pointers to FIB head structures (One per protocol family), each of
  which in turn points to the trie of routes available to that family.

  The basic change in the ABI compatible version of the change is to
  extent that array to be a 2 dimensional array, so that
  instead of protocol family X looking at rt_tables[X] for the
  table it needs, it looks at rt_tables[Y][X] when for all
  protocol families except ipv4 Y is always 0.
  Code that is unaware of the change always just sees the first row
  of the table, which of course looks just like the one dimensional
  array that existed before.

  The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
  are all maintained, but refer only to the first row of the array,
  so that existing callers in proprietary protocols can continue to
  do the "right thing".
  Some new entry points are added, for the exclusive use of ipv4 code
  called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
  which have an extra argument which refers the code to the correct row.

  In addition, there are some new entry points (currently called
  rtalloc_fib() and friends) that check the Address family being
  looked up and call either rtalloc() (and friends) if the protocol
  is not IPv4 forcing the action to row 0 or to the appropriate row
  if it IS IPv4 (and that info is available). These are for calling
  from code that is not specific to any particular protocol. The way
  these are implemented would change in the non ABI preserving code
  to be added later.

  One feature of the first version of the code is that for ipv4,
  the interface routes show up automatically on all the FIBs, so
  that no matter what FIB you select you always have the basic
  direct attached hosts available to you. (rtinit() does this
  automatically).

  You CAN delete an interface route from one FIB should you want
  to but by default it's there. ARP information is also available
  in each FIB. It's assumed that the same machine would have the
  same MAC address, regardless of which FIB you are using to get
  to it.

  This brings us as to how the correct FIB is selected for an outgoing
  IPV4 packet.

  Firstly, all packets have a FIB associated with them. if nothing
  has been done to change it, it will be FIB 0. The FIB is changed
  in the following ways.

  Packets fall into one of a number of classes.

  1/ locally generated packets, coming from a socket/PCB.
     Such packets select a FIB from a number associated with the
     socket/PCB. This in turn is inherited from the process,
     but can be changed by a socket option. The process in turn
     inherits it on fork. I have written a utility call setfib
     that acts a bit like nice..

         setfib -3 ping target.example.com # will use fib 3 for ping.

     It is an obvious extension to make it a property of a jail
     but I have not done so. It can be achieved by combining the setfib and
     jail commands.

  2/ packets received on an interface for forwarding.
     By default these packets would use table 0,
     (or possibly a number settable in a sysctl(not yet)).
     but prior to routing the firewall can inspect them (see below).
     (possibly in the future you may be able to associate a FIB
     with packets received on an interface..  An ifconfig arg, but not yet.)

  3/ packets inspected by a packet classifier, which can arbitrarily
     associate a fib with it on a packet by packet basis.
     A fib assigned to a packet by a packet classifier
     (such as ipfw) would over-ride a fib associated by
     a more default source. (such as cases 1 or 2).

  4/ a tcp listen socket associated with a fib will generate
     accept sockets that are associated with that same fib.

  5/ Packets generated in response to some other packet (e.g. reset
     or icmp packets). These should use the FIB associated with the
     packet being reponded to.

  6/ Packets generated during encapsulation.
     gif, tun and other tunnel interfaces will encapsulate using the FIB
     that was in effect withthe proces that set up the tunnel.
     thus setfib 1 ifconfig gif0 [tunnel instructions]
     will set the fib for the tunnel to use to be fib 1.

  Routing messages would be associated with their
  process, and thus select one FIB or another.
  messages from the kernel would be associated with the fib they
  refer to and would only be received by a routing socket associated
  with that fib. (not yet implemented)

  In addition Netstat has been edited to be able to cope with the
  fact that the array is now 2 dimensional. (It looks in system
  memory using libkvm (!)). Old versions of netstat see only the first FIB.

  In addition two sysctls are added to give:
  a) the number of FIBs compiled in (active)
  b) the default FIB of the calling process.

  Early testing experience:
  -------------------------

  Basically our (IronPort's) appliance does this functionality already
  using ipfw fwd but that method has some drawbacks.

  For example,
  It can't fully simulate a routing table because it can't influence the
  socket's choice of local address when a connect() is done.

  Testing during the generating of these changes has been
  remarkably smooth so far. Multiple tables have co-existed
  with no notable side effects, and packets have been routes
  accordingly.

  ipfw has grown 2 new keywords:

  setfib N ip from anay to any
  count ip from any to any fib N

  In pf there seems to be a requirement to be able to give symbolic names to the
  fibs but I do not have that capacity. I am not sure if it is required.

  SCTP has interestingly enough built in support for this, called VRFs
  in Cisco parlance. it will be interesting to see how that handles it
  when it suddenly actually does something.

  Where to next:
  --------------------

  After committing the ABI compatible version and MFCing it, I'd
  like to proceed in a forward direction in -current. this will
  result in some roto-tilling in the routing code.

  Firstly: the current code's idea of having a separate tree per
  protocol family, all of the same format, and pointed to by the
  1 dimensional array is a bit silly. Especially when one considers that
  there is code that makes assumptions about every protocol having the
  same internal structures there. Some protocols don't WANT that
  sort of structure. (for example the whole idea of a netmask is foreign
  to appletalk). This needs to be made opaque to the external code.

  My suggested first change is to add routing method pointers to the
  'domain' structure, along with information pointing the data.
  instead of having an array of pointers to uniform structures,
  there would be an array pointing to the 'domain' structures
  for each protocol address domain (protocol family),
  and the methods this reached would be called. The methods would have
  an argument that gives FIB number, but the protocol would be free
  to ignore it.

  When the ABI can be changed it raises the possibilty of the
  addition of a fib entry into the "struct route". Currently,
  the structure contains the sockaddr of the desination, and the resulting
  fib entry. To make this work fully, one could add a fib number
  so that given an address and a fib, one can find the third element, the
  fib entry.

  Interaction with the ARP layer/ LL layer would need to be
  revisited as well. Qing Li has been working on this already.

  This work was sponsored by Ironport Systems/Cisco

Reviewed by:    several including rwatson, bz and mlair (parts each)
Obtained from:  Ironport systems/Cisco
2008-05-09 23:03:00 +00:00

827 lines
20 KiB
C
Raw Blame History

/*-
* Copyright (c) 1998, Larry Lile
* All rights reserved.
*
* For latest sources and information on this driver, please
* go to http://anarchy.stdio.com.
*
* Questions, comments or suggestions should be directed to
* Larry Lile <lile@stdio.com>.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*
*/
/*
*
* General ISO 802.5 (Token Ring) support routines
*
*/
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipx.h"
#include "opt_mac.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_llc.h>
#include <net/if_types.h>
#include <net/netisr.h>
#include <net/route.h>
#include <net/bpf.h>
#include <net/iso88025.h>
#if defined(INET) || defined(INET6)
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/if_ether.h>
#endif
#ifdef INET6
#include <netinet6/nd6.h>
#endif
#ifdef IPX
#include <netipx/ipx.h>
#include <netipx/ipx_if.h>
#endif
#include <security/mac/mac_framework.h>
static const u_char iso88025_broadcastaddr[ISO88025_ADDR_LEN] =
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
static int iso88025_resolvemulti (struct ifnet *, struct sockaddr **,
struct sockaddr *);
#define senderr(e) do { error = (e); goto bad; } while (0)
/*
* Perform common duties while attaching to interface list
*/
void
iso88025_ifattach(struct ifnet *ifp, const u_int8_t *lla, int bpf)
{
struct ifaddr *ifa;
struct sockaddr_dl *sdl;
ifa = NULL;
ifp->if_type = IFT_ISO88025;
ifp->if_addrlen = ISO88025_ADDR_LEN;
ifp->if_hdrlen = ISO88025_HDR_LEN;
if_attach(ifp); /* Must be called before additional assignments */
ifp->if_output = iso88025_output;
ifp->if_input = iso88025_input;
ifp->if_resolvemulti = iso88025_resolvemulti;
ifp->if_broadcastaddr = iso88025_broadcastaddr;
if (ifp->if_baudrate == 0)
ifp->if_baudrate = TR_16MBPS; /* 16Mbit should be a safe default */
if (ifp->if_mtu == 0)
ifp->if_mtu = ISO88025_DEFAULT_MTU;
ifa = ifp->if_addr;
KASSERT(ifa != NULL, ("%s: no lladdr!\n", __func__));
sdl = (struct sockaddr_dl *)ifa->ifa_addr;
sdl->sdl_type = IFT_ISO88025;
sdl->sdl_alen = ifp->if_addrlen;
bcopy(lla, LLADDR(sdl), ifp->if_addrlen);
if (bpf)
bpfattach(ifp, DLT_IEEE802, ISO88025_HDR_LEN);
return;
}
/*
* Perform common duties while detaching a Token Ring interface
*/
void
iso88025_ifdetach(ifp, bpf)
struct ifnet *ifp;
int bpf;
{
if (bpf)
bpfdetach(ifp);
if_detach(ifp);
return;
}
int
iso88025_ioctl(struct ifnet *ifp, int command, caddr_t data)
{
struct ifaddr *ifa;
struct ifreq *ifr;
int error;
ifa = (struct ifaddr *) data;
ifr = (struct ifreq *) data;
error = 0;
switch (command) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
ifp->if_init(ifp->if_softc); /* before arpwhohas */
arp_ifinit(ifp, ifa);
break;
#endif /* INET */
#ifdef IPX
/*
* XXX - This code is probably wrong
*/
case AF_IPX: {
struct ipx_addr *ina;
ina = &(IA_SIPX(ifa)->sipx_addr);
if (ipx_nullhost(*ina))
ina->x_host = *(union ipx_host *)
IF_LLADDR(ifp);
else
bcopy((caddr_t) ina->x_host.c_host,
(caddr_t) IF_LLADDR(ifp),
ISO88025_ADDR_LEN);
/*
* Set new address
*/
ifp->if_init(ifp->if_softc);
}
break;
#endif /* IPX */
default:
ifp->if_init(ifp->if_softc);
break;
}
break;
case SIOCGIFADDR: {
struct sockaddr *sa;
sa = (struct sockaddr *) & ifr->ifr_data;
bcopy(IF_LLADDR(ifp),
(caddr_t) sa->sa_data, ISO88025_ADDR_LEN);
}
break;
case SIOCSIFMTU:
/*
* Set the interface MTU.
*/
if (ifr->ifr_mtu > ISO88025_MAX_MTU) {
error = EINVAL;
} else {
ifp->if_mtu = ifr->ifr_mtu;
}
break;
default:
error = EINVAL; /* XXX netbsd has ENOTTY??? */
break;
}
return (error);
}
/*
* ISO88025 encapsulation
*/
int
iso88025_output(ifp, m, dst, rt0)
struct ifnet *ifp;
struct mbuf *m;
struct sockaddr *dst;
struct rtentry *rt0;
{
u_int16_t snap_type = 0;
int loop_copy = 0, error = 0, rif_len = 0;
u_char edst[ISO88025_ADDR_LEN];
struct iso88025_header *th;
struct iso88025_header gen_th;
struct sockaddr_dl *sdl = NULL;
struct rtentry *rt = NULL;
#ifdef MAC
error = mac_ifnet_check_transmit(ifp, m);
if (error)
senderr(error);
#endif
if (ifp->if_flags & IFF_MONITOR)
senderr(ENETDOWN);
if (!((ifp->if_flags & IFF_UP) &&
(ifp->if_drv_flags & IFF_DRV_RUNNING)))
senderr(ENETDOWN);
getmicrotime(&ifp->if_lastchange);
/* Calculate routing info length based on arp table entry */
/* XXX any better way to do this ? */
if (rt0 != NULL) {
/* XXX MRT *//* Guess only */
error = rt_check_fib(&rt, &rt0, dst, rt0->rt_fibnum);
if (error)
goto bad;
RT_UNLOCK(rt);
}
if (rt && (sdl = (struct sockaddr_dl *)rt->rt_gateway))
if (SDL_ISO88025(sdl)->trld_rcf != 0)
rif_len = TR_RCF_RIFLEN(SDL_ISO88025(sdl)->trld_rcf);
/* Generate a generic 802.5 header for the packet */
gen_th.ac = TR_AC;
gen_th.fc = TR_LLC_FRAME;
(void)memcpy((caddr_t)gen_th.iso88025_shost, IF_LLADDR(ifp),
ISO88025_ADDR_LEN);
if (rif_len) {
gen_th.iso88025_shost[0] |= TR_RII;
if (rif_len > 2) {
gen_th.rcf = SDL_ISO88025(sdl)->trld_rcf;
(void)memcpy((caddr_t)gen_th.rd,
(caddr_t)SDL_ISO88025(sdl)->trld_route,
rif_len - 2);
}
}
switch (dst->sa_family) {
#ifdef INET
case AF_INET:
error = arpresolve(ifp, rt0, m, dst, edst);
if (error)
return (error == EWOULDBLOCK ? 0 : error);
snap_type = ETHERTYPE_IP;
break;
case AF_ARP:
{
struct arphdr *ah;
ah = mtod(m, struct arphdr *);
ah->ar_hrd = htons(ARPHRD_IEEE802);
loop_copy = -1; /* if this is for us, don't do it */
switch(ntohs(ah->ar_op)) {
case ARPOP_REVREQUEST:
case ARPOP_REVREPLY:
snap_type = ETHERTYPE_REVARP;
break;
case ARPOP_REQUEST:
case ARPOP_REPLY:
default:
snap_type = ETHERTYPE_ARP;
break;
}
if (m->m_flags & M_BCAST)
bcopy(ifp->if_broadcastaddr, edst, ISO88025_ADDR_LEN);
else
bcopy(ar_tha(ah), edst, ISO88025_ADDR_LEN);
}
break;
#endif /* INET */
#ifdef INET6
case AF_INET6:
error = nd6_storelladdr(ifp, rt0, m, dst, (u_char *)edst);
if (error)
return (error);
snap_type = ETHERTYPE_IPV6;
break;
#endif /* INET6 */
#ifdef IPX
case AF_IPX:
{
u_int8_t *cp;
bcopy((caddr_t)&(satoipx_addr(dst).x_host), (caddr_t)edst,
ISO88025_ADDR_LEN);
M_PREPEND(m, 3, M_WAIT);
m = m_pullup(m, 3);
if (m == 0)
senderr(ENOBUFS);
cp = mtod(m, u_int8_t *);
*cp++ = ETHERTYPE_IPX_8022;
*cp++ = ETHERTYPE_IPX_8022;
*cp++ = LLC_UI;
}
break;
#endif /* IPX */
case AF_UNSPEC:
{
struct iso88025_sockaddr_data *sd;
/*
* For AF_UNSPEC sockaddr.sa_data must contain all of the
* mac information needed to send the packet. This allows
* full mac, llc, and source routing function to be controlled.
* llc and source routing information must already be in the
* mbuf provided, ac/fc are set in sa_data. sockaddr.sa_data
* should be an iso88025_sockaddr_data structure see iso88025.h
*/
loop_copy = -1;
sd = (struct iso88025_sockaddr_data *)dst->sa_data;
gen_th.ac = sd->ac;
gen_th.fc = sd->fc;
(void)memcpy((caddr_t)edst, (caddr_t)sd->ether_dhost,
ISO88025_ADDR_LEN);
(void)memcpy((caddr_t)gen_th.iso88025_shost,
(caddr_t)sd->ether_shost, ISO88025_ADDR_LEN);
rif_len = 0;
break;
}
default:
if_printf(ifp, "can't handle af%d\n", dst->sa_family);
senderr(EAFNOSUPPORT);
break;
}
/*
* Add LLC header.
*/
if (snap_type != 0) {
struct llc *l;
M_PREPEND(m, LLC_SNAPFRAMELEN, M_DONTWAIT);
if (m == 0)
senderr(ENOBUFS);
l = mtod(m, struct llc *);
l->llc_control = LLC_UI;
l->llc_dsap = l->llc_ssap = LLC_SNAP_LSAP;
l->llc_snap.org_code[0] =
l->llc_snap.org_code[1] =
l->llc_snap.org_code[2] = 0;
l->llc_snap.ether_type = htons(snap_type);
}
/*
* Add local net header. If no space in first mbuf,
* allocate another.
*/
M_PREPEND(m, ISO88025_HDR_LEN + rif_len, M_DONTWAIT);
if (m == 0)
senderr(ENOBUFS);
th = mtod(m, struct iso88025_header *);
bcopy((caddr_t)edst, (caddr_t)&gen_th.iso88025_dhost, ISO88025_ADDR_LEN);
/* Copy as much of the generic header as is needed into the mbuf */
memcpy(th, &gen_th, ISO88025_HDR_LEN + rif_len);
/*
* If a simplex interface, and the packet is being sent to our
* Ethernet address or a broadcast address, loopback a copy.
* XXX To make a simplex device behave exactly like a duplex
* device, we should copy in the case of sending to our own
* ethernet address (thus letting the original actually appear
* on the wire). However, we don't do that here for security
* reasons and compatibility with the original behavior.
*/
if ((ifp->if_flags & IFF_SIMPLEX) && (loop_copy != -1)) {
if ((m->m_flags & M_BCAST) || (loop_copy > 0)) {
struct mbuf *n;
n = m_copy(m, 0, (int)M_COPYALL);
(void) if_simloop(ifp, n, dst->sa_family,
ISO88025_HDR_LEN);
} else if (bcmp(th->iso88025_dhost, th->iso88025_shost,
ETHER_ADDR_LEN) == 0) {
(void) if_simloop(ifp, m, dst->sa_family,
ISO88025_HDR_LEN);
return(0); /* XXX */
}
}
IFQ_HANDOFF_ADJ(ifp, m, ISO88025_HDR_LEN + LLC_SNAPFRAMELEN, error);
if (error) {
printf("iso88025_output: packet dropped QFULL.\n");
ifp->if_oerrors++;
}
return (error);
bad:
ifp->if_oerrors++;
if (m)
m_freem(m);
return (error);
}
/*
* ISO 88025 de-encapsulation
*/
void
iso88025_input(ifp, m)
struct ifnet *ifp;
struct mbuf *m;
{
struct iso88025_header *th;
struct llc *l;
int isr;
int mac_hdr_len;
/*
* Do consistency checks to verify assumptions
* made by code past this point.
*/
if ((m->m_flags & M_PKTHDR) == 0) {
if_printf(ifp, "discard frame w/o packet header\n");
ifp->if_ierrors++;
m_freem(m);
return;
}
if (m->m_pkthdr.rcvif == NULL) {
if_printf(ifp, "discard frame w/o interface pointer\n");
ifp->if_ierrors++;
m_freem(m);
return;
}
m = m_pullup(m, ISO88025_HDR_LEN);
if (m == NULL) {
ifp->if_ierrors++;
goto dropanyway;
}
th = mtod(m, struct iso88025_header *);
m->m_pkthdr.header = (void *)th;
/*
* Discard packet if interface is not up.
*/
if (!((ifp->if_flags & IFF_UP) &&
(ifp->if_drv_flags & IFF_DRV_RUNNING)))
goto dropanyway;
/*
* Give bpf a chance at the packet.
*/
BPF_MTAP(ifp, m);
/*
* Interface marked for monitoring; discard packet.
*/
if (ifp->if_flags & IFF_MONITOR) {
m_freem(m);
return;
}
#ifdef MAC
mac_ifnet_create_mbuf(ifp, m);
#endif
/*
* Update interface statistics.
*/
ifp->if_ibytes += m->m_pkthdr.len;
getmicrotime(&ifp->if_lastchange);
/*
* Discard non local unicast packets when interface
* is in promiscuous mode.
*/
if ((ifp->if_flags & IFF_PROMISC) &&
((th->iso88025_dhost[0] & 1) == 0) &&
(bcmp(IF_LLADDR(ifp), (caddr_t) th->iso88025_dhost,
ISO88025_ADDR_LEN) != 0))
goto dropanyway;
/*
* Set mbuf flags for bcast/mcast.
*/
if (th->iso88025_dhost[0] & 1) {
if (bcmp(iso88025_broadcastaddr, th->iso88025_dhost,
ISO88025_ADDR_LEN) == 0)
m->m_flags |= M_BCAST;
else
m->m_flags |= M_MCAST;
ifp->if_imcasts++;
}
mac_hdr_len = ISO88025_HDR_LEN;
/* Check for source routing info */
if (th->iso88025_shost[0] & TR_RII)
mac_hdr_len += TR_RCF_RIFLEN(th->rcf);
/* Strip off ISO88025 header. */
m_adj(m, mac_hdr_len);
m = m_pullup(m, LLC_SNAPFRAMELEN);
if (m == 0) {
ifp->if_ierrors++;
goto dropanyway;
}
l = mtod(m, struct llc *);
switch (l->llc_dsap) {
#ifdef IPX
case ETHERTYPE_IPX_8022: /* Thanks a bunch Novell */
if ((l->llc_control != LLC_UI) ||
(l->llc_ssap != ETHERTYPE_IPX_8022)) {
ifp->if_noproto++;
goto dropanyway;
}
th->iso88025_shost[0] &= ~(TR_RII);
m_adj(m, 3);
isr = NETISR_IPX;
break;
#endif /* IPX */
case LLC_SNAP_LSAP: {
u_int16_t type;
if ((l->llc_control != LLC_UI) ||
(l->llc_ssap != LLC_SNAP_LSAP)) {
ifp->if_noproto++;
goto dropanyway;
}
if (l->llc_snap.org_code[0] != 0 ||
l->llc_snap.org_code[1] != 0 ||
l->llc_snap.org_code[2] != 0) {
ifp->if_noproto++;
goto dropanyway;
}
type = ntohs(l->llc_snap.ether_type);
m_adj(m, LLC_SNAPFRAMELEN);
switch (type) {
#ifdef INET
case ETHERTYPE_IP:
th->iso88025_shost[0] &= ~(TR_RII);
if ((m = ip_fastforward(m)) == NULL)
return;
isr = NETISR_IP;
break;
case ETHERTYPE_ARP:
if (ifp->if_flags & IFF_NOARP)
goto dropanyway;
isr = NETISR_ARP;
break;
#endif /* INET */
#ifdef IPX_SNAP /* XXX: Not supported! */
case ETHERTYPE_IPX:
th->iso88025_shost[0] &= ~(TR_RII);
isr = NETISR_IPX;
break;
#endif /* IPX_SNAP */
#ifdef INET6
case ETHERTYPE_IPV6:
th->iso88025_shost[0] &= ~(TR_RII);
isr = NETISR_IPV6;
break;
#endif /* INET6 */
default:
printf("iso88025_input: unexpected llc_snap ether_type 0x%02x\n", type);
ifp->if_noproto++;
goto dropanyway;
}
break;
}
#ifdef ISO
case LLC_ISO_LSAP:
switch (l->llc_control) {
case LLC_UI:
ifp->if_noproto++;
goto dropanyway;
break;
case LLC_XID:
case LLC_XID_P:
if(m->m_len < ISO88025_ADDR_LEN)
goto dropanyway;
l->llc_window = 0;
l->llc_fid = 9;
l->llc_class = 1;
l->llc_dsap = l->llc_ssap = 0;
/* Fall through to */
case LLC_TEST:
case LLC_TEST_P:
{
struct sockaddr sa;
struct arpcom *ac;
struct iso88025_sockaddr_data *th2;
int i;
u_char c;
c = l->llc_dsap;
if (th->iso88025_shost[0] & TR_RII) { /* XXX */
printf("iso88025_input: dropping source routed LLC_TEST\n");
goto dropanyway;
}
l->llc_dsap = l->llc_ssap;
l->llc_ssap = c;
if (m->m_flags & (M_BCAST | M_MCAST))
bcopy((caddr_t)IF_LLADDR(ifp),
(caddr_t)th->iso88025_dhost,
ISO88025_ADDR_LEN);
sa.sa_family = AF_UNSPEC;
sa.sa_len = sizeof(sa);
th2 = (struct iso88025_sockaddr_data *)sa.sa_data;
for (i = 0; i < ISO88025_ADDR_LEN; i++) {
th2->ether_shost[i] = c = th->iso88025_dhost[i];
th2->ether_dhost[i] = th->iso88025_dhost[i] =
th->iso88025_shost[i];
th->iso88025_shost[i] = c;
}
th2->ac = TR_AC;
th2->fc = TR_LLC_FRAME;
ifp->if_output(ifp, m, &sa, NULL);
return;
}
default:
printf("iso88025_input: unexpected llc control 0x%02x\n", l->llc_control);
ifp->if_noproto++;
goto dropanyway;
break;
}
break;
#endif /* ISO */
default:
printf("iso88025_input: unknown dsap 0x%x\n", l->llc_dsap);
ifp->if_noproto++;
goto dropanyway;
break;
}
netisr_dispatch(isr, m);
return;
dropanyway:
ifp->if_iqdrops++;
if (m)
m_freem(m);
return;
}
static int
iso88025_resolvemulti (ifp, llsa, sa)
struct ifnet *ifp;
struct sockaddr **llsa;
struct sockaddr *sa;
{
struct sockaddr_dl *sdl;
struct sockaddr_in *sin;
#ifdef INET6
struct sockaddr_in6 *sin6;
#endif
u_char *e_addr;
switch(sa->sa_family) {
case AF_LINK:
/*
* No mapping needed. Just check that it's a valid MC address.
*/
sdl = (struct sockaddr_dl *)sa;
e_addr = LLADDR(sdl);
if ((e_addr[0] & 1) != 1) {
return (EADDRNOTAVAIL);
}
*llsa = 0;
return (0);
#ifdef INET
case AF_INET:
sin = (struct sockaddr_in *)sa;
if (!IN_MULTICAST(ntohl(sin->sin_addr.s_addr))) {
return (EADDRNOTAVAIL);
}
MALLOC(sdl, struct sockaddr_dl *, sizeof *sdl, M_IFMADDR,
M_NOWAIT|M_ZERO);
if (sdl == NULL)
return (ENOMEM);
sdl->sdl_len = sizeof *sdl;
sdl->sdl_family = AF_LINK;
sdl->sdl_index = ifp->if_index;
sdl->sdl_type = IFT_ISO88025;
sdl->sdl_alen = ISO88025_ADDR_LEN;
e_addr = LLADDR(sdl);
ETHER_MAP_IP_MULTICAST(&sin->sin_addr, e_addr);
*llsa = (struct sockaddr *)sdl;
return (0);
#endif
#ifdef INET6
case AF_INET6:
sin6 = (struct sockaddr_in6 *)sa;
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
/*
* An IP6 address of 0 means listen to all
* of the Ethernet multicast address used for IP6.
* (This is used for multicast routers.)
*/
ifp->if_flags |= IFF_ALLMULTI;
*llsa = 0;
return (0);
}
if (!IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
return (EADDRNOTAVAIL);
}
MALLOC(sdl, struct sockaddr_dl *, sizeof *sdl, M_IFMADDR,
M_NOWAIT|M_ZERO);
if (sdl == NULL)
return (ENOMEM);
sdl->sdl_len = sizeof *sdl;
sdl->sdl_family = AF_LINK;
sdl->sdl_index = ifp->if_index;
sdl->sdl_type = IFT_ISO88025;
sdl->sdl_alen = ISO88025_ADDR_LEN;
e_addr = LLADDR(sdl);
ETHER_MAP_IPV6_MULTICAST(&sin6->sin6_addr, e_addr);
*llsa = (struct sockaddr *)sdl;
return (0);
#endif
default:
/*
* Well, the text isn't quite right, but it's the name
* that counts...
*/
return (EAFNOSUPPORT);
}
return (0);
}
MALLOC_DEFINE(M_ISO88025, "arpcom", "802.5 interface internals");
static void*
iso88025_alloc(u_char type, struct ifnet *ifp)
{
struct arpcom *ac;
ac = malloc(sizeof(struct arpcom), M_ISO88025, M_WAITOK | M_ZERO);
ac->ac_ifp = ifp;
return (ac);
}
static void
iso88025_free(void *com, u_char type)
{
free(com, M_ISO88025);
}
static int
iso88025_modevent(module_t mod, int type, void *data)
{
switch (type) {
case MOD_LOAD:
if_register_com_alloc(IFT_ISO88025, iso88025_alloc,
iso88025_free);
break;
case MOD_UNLOAD:
if_deregister_com_alloc(IFT_ISO88025);
break;
default:
return EOPNOTSUPP;
}
return (0);
}
static moduledata_t iso88025_mod = {
"iso88025",
iso88025_modevent,
0
};
DECLARE_MODULE(iso88025, iso88025_mod, SI_SUB_PSEUDO, SI_ORDER_ANY);
MODULE_VERSION(iso88025, 1);
Reference in New Issue View Git Blame Copy Permalink