freebsd-skq/sys/sparc64/pci/psycho.c
Thomas Moestl 2cda2e47da - Clear the CE AFSR bits which indicate the error condition when handling
a correctable DMA error. Failing to do so can cause the error interrupt
  to be triggered over and over again.
- Clean up the comments for UEAFSR_* constants, fix a typo (UEAFSR_BLK is
  (1 << 23), not (1 << 22)), and add two more. Also, add similar constants
  for the CE AFSR bits.
2003-09-04 15:25:10 +00:00

1375 lines
39 KiB
C

/*
* Copyright (c) 1999, 2000 Matthew R. Green
* Copyright (c) 2001 - 2003 by Thomas Moestl <tmm@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: NetBSD: psycho.c,v 1.39 2001/10/07 20:30:41 eeh Exp
*
* $FreeBSD$
*/
/*
* Support for `psycho' and `psycho+' UPA to PCI bridge and
* UltraSPARC IIi and IIe `sabre' PCI controllers.
*/
#include "opt_ofw_pci.h"
#include "opt_psycho.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/pcpu.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_pci.h>
#include <machine/bus.h>
#include <machine/bus_private.h>
#include <machine/iommureg.h>
#include <machine/bus_common.h>
#include <machine/frame.h>
#include <machine/intr_machdep.h>
#include <machine/nexusvar.h>
#include <machine/ofw_bus.h>
#include <machine/ofw_upa.h>
#include <machine/resource.h>
#include <machine/cpu.h>
#include <sys/rman.h>
#include <machine/iommuvar.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <sparc64/pci/ofw_pci.h>
#include <sparc64/pci/psychoreg.h>
#include <sparc64/pci/psychovar.h>
#include "pcib_if.h"
static void psycho_get_ranges(phandle_t, struct upa_ranges **, int *);
static void psycho_set_intr(struct psycho_softc *, int, device_t, bus_addr_t,
int, driver_intr_t);
static int psycho_find_intrmap(struct psycho_softc *, int, bus_addr_t *,
bus_addr_t *, u_long *);
static void psycho_intr_stub(void *);
static bus_space_tag_t psycho_alloc_bus_tag(struct psycho_softc *, int);
#ifndef OFW_NEWPCI
static ofw_pci_binit_t psycho_binit;
#endif
/* Interrupt handlers */
static void psycho_ue(void *);
static void psycho_ce(void *);
static void psycho_bus_a(void *);
static void psycho_bus_b(void *);
static void psycho_powerfail(void *);
#ifdef PSYCHO_MAP_WAKEUP
static void psycho_wakeup(void *);
#endif
/* IOMMU support */
static void psycho_iommu_init(struct psycho_softc *, int);
/*
* Methods.
*/
static device_probe_t psycho_probe;
static device_attach_t psycho_attach;
static bus_read_ivar_t psycho_read_ivar;
static bus_setup_intr_t psycho_setup_intr;
static bus_teardown_intr_t psycho_teardown_intr;
static bus_alloc_resource_t psycho_alloc_resource;
static bus_activate_resource_t psycho_activate_resource;
static bus_deactivate_resource_t psycho_deactivate_resource;
static bus_release_resource_t psycho_release_resource;
static pcib_maxslots_t psycho_maxslots;
static pcib_read_config_t psycho_read_config;
static pcib_write_config_t psycho_write_config;
static pcib_route_interrupt_t psycho_route_interrupt;
static ofw_pci_intr_pending_t psycho_intr_pending;
#ifndef OFW_NEWPCI
static ofw_pci_guess_ino_t psycho_guess_ino;
#endif
static ofw_pci_get_bus_handle_t psycho_get_bus_handle;
#ifdef OFW_NEWPCI
static ofw_pci_get_node_t psycho_get_node;
static ofw_pci_adjust_busrange_t psycho_adjust_busrange;
#endif
static device_method_t psycho_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, psycho_probe),
DEVMETHOD(device_attach, psycho_attach),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_read_ivar, psycho_read_ivar),
DEVMETHOD(bus_setup_intr, psycho_setup_intr),
DEVMETHOD(bus_teardown_intr, psycho_teardown_intr),
DEVMETHOD(bus_alloc_resource, psycho_alloc_resource),
DEVMETHOD(bus_activate_resource, psycho_activate_resource),
DEVMETHOD(bus_deactivate_resource, psycho_deactivate_resource),
DEVMETHOD(bus_release_resource, psycho_release_resource),
/* pcib interface */
DEVMETHOD(pcib_maxslots, psycho_maxslots),
DEVMETHOD(pcib_read_config, psycho_read_config),
DEVMETHOD(pcib_write_config, psycho_write_config),
DEVMETHOD(pcib_route_interrupt, psycho_route_interrupt),
/* ofw_pci interface */
DEVMETHOD(ofw_pci_intr_pending, psycho_intr_pending),
#ifndef OFW_NEWPCI
DEVMETHOD(ofw_pci_guess_ino, psycho_guess_ino),
#endif
DEVMETHOD(ofw_pci_get_bus_handle, psycho_get_bus_handle),
#ifdef OFW_NEWPCI
DEVMETHOD(ofw_pci_get_node, psycho_get_node),
DEVMETHOD(ofw_pci_adjust_busrange, psycho_adjust_busrange),
#endif
{ 0, 0 }
};
static driver_t psycho_driver = {
"pcib",
psycho_methods,
sizeof(struct psycho_softc),
};
static devclass_t psycho_devclass;
DRIVER_MODULE(psycho, nexus, psycho_driver, psycho_devclass, 0, 0);
SLIST_HEAD(, psycho_softc) psycho_softcs =
SLIST_HEAD_INITIALIZER(psycho_softcs);
struct psycho_clr {
struct psycho_softc *pci_sc;
bus_addr_t pci_clr; /* clear register */
driver_intr_t *pci_handler; /* handler to call */
void *pci_arg; /* argument for the handler */
void *pci_cookie; /* interrupt cookie of parent bus */
};
struct psycho_strayclr {
struct psycho_softc *psc_sc;
bus_addr_t psc_clr; /* clear register */
};
#define PSYCHO_READ8(sc, off) \
bus_space_read_8((sc)->sc_bustag, (sc)->sc_bushandle, (off))
#define PSYCHO_WRITE8(sc, off, v) \
bus_space_write_8((sc)->sc_bustag, (sc)->sc_bushandle, (off), (v))
#define PCICTL_READ8(sc, off) \
PSYCHO_READ8((sc), (sc)->sc_pcictl + (off))
#define PCICTL_WRITE8(sc, off, v) \
PSYCHO_WRITE8((sc), (sc)->sc_pcictl + (off), (v))
/*
* "sabre" is the UltraSPARC IIi onboard UPA to PCI bridge. It manages a
* single PCI bus and does not have a streaming buffer. It often has an APB
* (advanced PCI bridge) connected to it, which was designed specifically for
* the IIi. The APB let's the IIi handle two independednt PCI buses, and
* appears as two "simba"'s underneath the sabre.
*
* "psycho" and "psycho+" is a dual UPA to PCI bridge. It sits on the UPA bus
* and manages two PCI buses. "psycho" has two 64-bit 33MHz buses, while
* "psycho+" controls both a 64-bit 33Mhz and a 64-bit 66Mhz PCI bus. You
* will usually find a "psycho+" since I don't think the original "psycho"
* ever shipped, and if it did it would be in the U30.
*
* Each "psycho" PCI bus appears as a separate OFW node, but since they are
* both part of the same IC, they only have a single register space. As such,
* they need to be configured together, even though the autoconfiguration will
* attach them separately.
*
* On UltraIIi machines, "sabre" itself usually takes pci0, with "simba" often
* as pci1 and pci2, although they have been implemented with other PCI bus
* numbers on some machines.
*
* On UltraII machines, there can be any number of "psycho+" ICs, each
* providing two PCI buses.
*
*
* XXXX The psycho/sabre node has an `interrupts' attribute. They contain
* the values of the following interrupts in this order:
*
* PCI Bus Error (30)
* DMA UE (2e)
* DMA CE (2f)
* Power Fail (25)
*
* We really should attach handlers for each.
*/
#ifdef DEBUGGER_ON_POWERFAIL
#define PSYCHO_PWRFAIL_INT_FLAGS INTR_FAST
#else
#define PSYCHO_PWRFAIL_INT_FLAGS 0
#endif
#define OFW_PCI_TYPE "pci"
struct psycho_desc {
char *pd_string;
int pd_mode;
char *pd_name;
};
static struct psycho_desc psycho_compats[] = {
{ "pci108e,8000", PSYCHO_MODE_PSYCHO, "Psycho compatible" },
{ "pci108e,a000", PSYCHO_MODE_SABRE, "Sabre (US-IIi) compatible" },
{ "pci108e,a001", PSYCHO_MODE_SABRE, "Sabre (US-IIe) compatible" },
{ NULL, 0, NULL }
};
static struct psycho_desc psycho_models[] = {
{ "SUNW,psycho", PSYCHO_MODE_PSYCHO, "Psycho" },
{ "SUNW,sabre", PSYCHO_MODE_SABRE, "Sabre" },
{ NULL, 0, NULL }
};
static struct psycho_desc *
psycho_find_desc(struct psycho_desc *table, char *string)
{
struct psycho_desc *desc;
for (desc = table; desc->pd_string != NULL; desc++) {
if (strcmp(desc->pd_string, string) == 0)
return (desc);
}
return (NULL);
}
static struct psycho_desc *
psycho_get_desc(phandle_t node, char *model)
{
struct psycho_desc *rv;
char compat[32];
rv = NULL;
if (model != NULL)
rv = psycho_find_desc(psycho_models, model);
if (rv == NULL &&
OF_getprop(node, "compatible", compat, sizeof(compat)) != -1)
rv = psycho_find_desc(psycho_compats, compat);
return (rv);
}
static int
psycho_probe(device_t dev)
{
phandle_t node;
char *dtype;
node = nexus_get_node(dev);
dtype = nexus_get_device_type(dev);
if (nexus_get_reg(dev) != NULL && dtype != NULL &&
strcmp(dtype, OFW_PCI_TYPE) == 0 &&
psycho_get_desc(node, nexus_get_model(dev)) != NULL) {
device_set_desc(dev, "U2P UPA-PCI bridge");
return (0);
}
return (ENXIO);
}
/*
* SUNW,psycho initialisation ..
* - find the per-psycho registers
* - figure out the IGN.
* - find our partner psycho
* - configure ourselves
* - bus range, bus,
* - interrupt map,
* - setup the chipsets.
* - if we're the first of the pair, initialise the IOMMU, otherwise
* just copy it's tags and addresses.
*/
static int
psycho_attach(device_t dev)
{
struct psycho_softc *sc;
struct psycho_softc *osc = NULL;
struct psycho_softc *asc;
struct upa_regs *reg;
#ifndef OFW_NEWPCI
struct ofw_pci_bdesc obd;
#endif
struct psycho_desc *desc;
phandle_t node;
u_int64_t csr;
u_long mlen;
int psycho_br[2];
int n, i, nreg, rid;
#ifdef PSYCHO_DEBUG
bus_addr_t map, clr;
u_int64_t mr;
#endif
node = nexus_get_node(dev);
sc = device_get_softc(dev);
desc = psycho_get_desc(node, nexus_get_model(dev));
sc->sc_node = node;
sc->sc_dev = dev;
sc->sc_dmatag = nexus_get_dmatag(dev);
sc->sc_mode = desc->pd_mode;
/*
* The psycho gets three register banks:
* (0) per-PBM configuration and status registers
* (1) per-PBM PCI configuration space, containing only the
* PBM 256-byte PCI header
* (2) the shared psycho configuration registers (struct psychoreg)
*/
reg = nexus_get_reg(dev);
nreg = nexus_get_nreg(dev);
/* Register layouts are different. stuupid. */
if (sc->sc_mode == PSYCHO_MODE_PSYCHO) {
if (nreg <= 2)
panic("psycho_attach: %d not enough registers", nreg);
sc->sc_basepaddr = (vm_paddr_t)UPA_REG_PHYS(&reg[2]);
mlen = UPA_REG_SIZE(&reg[2]);
sc->sc_pcictl = UPA_REG_PHYS(&reg[0]) - sc->sc_basepaddr;
switch (sc->sc_pcictl) {
case PSR_PCICTL0:
sc->sc_half = 0;
break;
case PSR_PCICTL1:
sc->sc_half = 1;
break;
default:
panic("psycho_attach: bogus pci control register "
"location");
}
} else {
if (nreg <= 0)
panic("psycho_attach: %d not enough registers", nreg);
sc->sc_basepaddr = (vm_paddr_t)UPA_REG_PHYS(&reg[0]);
mlen = UPA_REG_SIZE(reg);
sc->sc_pcictl = PSR_PCICTL0;
sc->sc_half = 0;
}
/*
* Match other psycho's that are already configured against
* the base physical address. This will be the same for a
* pair of devices that share register space.
*/
SLIST_FOREACH(asc, &psycho_softcs, sc_link) {
if (asc->sc_basepaddr == sc->sc_basepaddr) {
/* Found partner */
osc = asc;
break;
}
}
if (osc == NULL) {
rid = 0;
sc->sc_mem_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid,
sc->sc_basepaddr, sc->sc_basepaddr + mlen - 1, mlen,
RF_ACTIVE);
if (sc->sc_mem_res == NULL ||
rman_get_start(sc->sc_mem_res) != sc->sc_basepaddr)
panic("psycho_attach: can't allocate device memory");
sc->sc_bustag = rman_get_bustag(sc->sc_mem_res);
sc->sc_bushandle = rman_get_bushandle(sc->sc_mem_res);
} else {
/*
* There's another psycho using the same register space. Copy the
* relevant stuff.
*/
sc->sc_mem_res = NULL;
sc->sc_bustag = osc->sc_bustag;
sc->sc_bushandle = osc->sc_bushandle;
}
csr = PSYCHO_READ8(sc, PSR_CS);
sc->sc_ign = 0x7c0; /* APB IGN is always 0x7c */
if (sc->sc_mode == PSYCHO_MODE_PSYCHO)
sc->sc_ign = PSYCHO_GCSR_IGN(csr) << 6;
device_printf(dev, "%s, impl %d, version %d, ign %#x, bus %c\n",
desc->pd_name, (int)PSYCHO_GCSR_IMPL(csr),
(int)PSYCHO_GCSR_VERS(csr), sc->sc_ign, 'A' + sc->sc_half);
/*
* Setup the PCI control register
*/
csr = PCICTL_READ8(sc, PCR_CS);
csr |= PCICTL_MRLM | PCICTL_ARB_PARK | PCICTL_ERRINTEN | PCICTL_4ENABLE;
csr &= ~(PCICTL_SERR | PCICTL_CPU_PRIO | PCICTL_ARB_PRIO |
PCICTL_RTRYWAIT);
PCICTL_WRITE8(sc, PCR_CS, csr);
if (sc->sc_mode == PSYCHO_MODE_SABRE) {
/*
* Use the PROM preset for now.
*/
csr = PCICTL_READ8(sc, PCR_TAS);
if (csr == 0)
panic("psycho_attach: sabre TAS not initialized.");
sc->sc_dvmabase = (ffs(csr) - 1) << PCITAS_ADDR_SHIFT;
} else
sc->sc_dvmabase = -1;
/* Grab the psycho ranges */
psycho_get_ranges(sc->sc_node, &sc->sc_range, &sc->sc_nrange);
/* Initialize memory and i/o rmans */
sc->sc_io_rman.rm_type = RMAN_ARRAY;
sc->sc_io_rman.rm_descr = "Psycho PCI I/O Ports";
if (rman_init(&sc->sc_io_rman) != 0 ||
rman_manage_region(&sc->sc_io_rman, 0, PSYCHO_IO_SIZE) != 0)
panic("psycho_probe: failed to set up i/o rman");
sc->sc_mem_rman.rm_type = RMAN_ARRAY;
sc->sc_mem_rman.rm_descr = "Psycho PCI Memory";
if (rman_init(&sc->sc_mem_rman) != 0 ||
rman_manage_region(&sc->sc_mem_rman, 0, PSYCHO_MEM_SIZE) != 0)
panic("psycho_probe: failed to set up memory rman");
/*
* Find the addresses of the various bus spaces.
* There should not be multiple ones of one kind.
* The physical start addresses of the ranges are the configuration,
* memory and IO handles.
*/
for (n = 0; n < sc->sc_nrange; n++) {
i = UPA_RANGE_CS(&sc->sc_range[n]);
if (sc->sc_bh[i] != 0)
panic("psycho_attach: duplicate range for space %d", i);
sc->sc_bh[i] = UPA_RANGE_PHYS(&sc->sc_range[n]);
}
/*
* Check that all needed handles are present. The PCI_CS_MEM64 one is
* not currently used.
*/
for (n = 0; n < 3; n++) {
if (sc->sc_bh[n] == 0)
panic("psycho_attach: range %d missing", n);
}
/* Register the softc, this is needed for paired psychos. */
SLIST_INSERT_HEAD(&psycho_softcs, sc, sc_link);
/*
* If we're a sabre or the first of a pair of psycho's to arrive here,
* start up the IOMMU.
*/
if (osc == NULL) {
/*
* Establish handlers for interesting interrupts....
*
* XXX We need to remember these and remove this to support
* hotplug on the UPA/FHC bus.
*
* XXX Not all controllers have these, but installing them
* is better than trying to sort through this mess.
*/
psycho_set_intr(sc, 0, dev, PSR_UE_INT_MAP, INTR_FAST,
psycho_ue);
psycho_set_intr(sc, 1, dev, PSR_CE_INT_MAP, 0, psycho_ce);
psycho_set_intr(sc, 2, dev, PSR_PCIAERR_INT_MAP, INTR_FAST,
psycho_bus_a);
psycho_set_intr(sc, 4, dev, PSR_POWER_INT_MAP,
PSYCHO_PWRFAIL_INT_FLAGS, psycho_powerfail);
/* Psycho-specific initialization. */
if (sc->sc_mode == PSYCHO_MODE_PSYCHO) {
/*
* Sabres do not have the following two interrupts.
*/
psycho_set_intr(sc, 3, dev, PSR_PCIBERR_INT_MAP,
INTR_FAST, psycho_bus_b);
#ifdef PSYCHO_MAP_WAKEUP
/*
* psycho_wakeup() doesn't do anything useful right
* now.
*/
psycho_set_intr(sc, 5, dev, PSR_PWRMGT_INT_MAP, 0,
psycho_wakeup);
#endif /* PSYCHO_MAP_WAKEUP */
/* Initialize the counter-timer. */
sparc64_counter_init(sc->sc_bustag, sc->sc_bushandle,
PSR_TC0);
}
/*
* Setup IOMMU and PCI configuration if we're the first
* of a pair of psycho's to arrive here.
*
* We should calculate a TSB size based on amount of RAM
* and number of bus controllers and number and type of
* child devices.
*
* For the moment, 32KB should be more than enough.
*/
sc->sc_is = malloc(sizeof(struct iommu_state), M_DEVBUF,
M_NOWAIT);
if (sc->sc_is == NULL)
panic("psycho_attach: malloc iommu_state failed");
sc->sc_is->is_sb[0] = 0;
sc->sc_is->is_sb[1] = 0;
if (OF_getproplen(sc->sc_node, "no-streaming-cache") < 0)
sc->sc_is->is_sb[0] = sc->sc_pcictl + PCR_STRBUF;
psycho_iommu_init(sc, 3);
} else {
/* Just copy IOMMU state, config tag and address */
sc->sc_is = osc->sc_is;
if (OF_getproplen(sc->sc_node, "no-streaming-cache") < 0)
sc->sc_is->is_sb[1] = sc->sc_pcictl + PCR_STRBUF;
iommu_reset(sc->sc_is);
}
/* Allocate our tags. */
sc->sc_memt = psycho_alloc_bus_tag(sc, PCI_MEMORY_BUS_SPACE);
sc->sc_iot = psycho_alloc_bus_tag(sc, PCI_IO_BUS_SPACE);
sc->sc_cfgt = psycho_alloc_bus_tag(sc, PCI_CONFIG_BUS_SPACE);
if (bus_dma_tag_create(sc->sc_dmatag, 8, 1, 0, 0x3ffffffff, NULL, NULL,
0x3ffffffff, 0xff, 0xffffffff, 0, NULL, NULL, &sc->sc_dmat) != 0)
panic("psycho_attach: bus_dma_tag_create failed");
/* Customize the tag. */
sc->sc_dmat->dt_cookie = sc->sc_is;
sc->sc_dmat->dt_mt = &iommu_dma_methods;
/* XXX: register as root dma tag (kludge). */
sparc64_root_dma_tag = sc->sc_dmat;
#ifdef PSYCHO_DEBUG
/*
* Enable all interrupts and clear all interrupt states.
* This aids the debugging of interrupt routing problems.
*/
for (map = PSR_PCIA0_INT_MAP, clr = PSR_PCIA0_INT_CLR, n = 0;
map <= PSR_PCIB3_INT_MAP; map += 8, clr += 32, n++) {
mr = PSYCHO_READ8(sc, map);
device_printf(dev, "intr map (pci) %d: %#lx\n", n, (u_long)mr);
PSYCHO_WRITE8(sc, map, mr & ~INTMAP_V);
for (i = 0; i < 4; i++)
PCICTL_WRITE8(sc, clr + i * 8, 0);
PSYCHO_WRITE8(sc, map, INTMAP_ENABLE(mr, PCPU_GET(mid)));
}
for (map = PSR_SCSI_INT_MAP, clr = PSR_SCSI_INT_CLR, n = 0;
map <= PSR_SERIAL_INT_MAP; map += 8, clr += 8, n++) {
mr = PSYCHO_READ8(sc, map);
device_printf(dev, "intr map (obio) %d: %#lx, clr: %#lx\n", n,
(u_long)mr, (u_long)clr);
PSYCHO_WRITE8(sc, map, mr & ~INTMAP_V);
PSYCHO_WRITE8(sc, clr, 0);
PSYCHO_WRITE8(sc, map, INTMAP_ENABLE(mr, PCPU_GET(mid)));
}
#endif /* PSYCHO_DEBUG */
/*
* Get the bus range from the firmware; it is used solely for obtaining
* the inital bus number, and cannot be trusted on all machines.
*/
n = OF_getprop(node, "bus-range", (void *)psycho_br, sizeof(psycho_br));
if (n == -1)
panic("could not get psycho bus-range");
if (n != sizeof(psycho_br))
panic("broken psycho bus-range (%d)", n);
sc->sc_secbus = sc->sc_subbus = ofw_pci_alloc_busno(sc->sc_node);
/*
* Program the bus range registers.
* NOTE: the psycho, the second write changes the bus number the
* psycho itself uses for it's configuration space, so these
* writes must be kept in this order!
* The sabre always uses bus 0, but there only can be one sabre per
* machine.
*/
PCIB_WRITE_CONFIG(dev, psycho_br[0], PCS_DEVICE, PCS_FUNC, PCSR_SUBBUS,
sc->sc_subbus, 1);
PCIB_WRITE_CONFIG(dev, psycho_br[0], PCS_DEVICE, PCS_FUNC, PCSR_SECBUS,
sc->sc_secbus, 1);
#ifdef OFW_NEWPCI
ofw_bus_setup_iinfo(node, &sc->sc_iinfo, sizeof(ofw_pci_intr_t));
#else
obd.obd_bus = obd.obd_secbus = sc->sc_secbus;
obd.obd_subbus = sc->sc_subbus;
obd.obd_slot = PCS_DEVICE;
obd.obd_func = PCS_FUNC;
obd.obd_init = psycho_binit;
obd.obd_super = NULL;
/*
* Initialize the interrupt registers of all devices hanging from
* the host bridge directly or indirectly via PCI-PCI bridges.
* The MI code (and the PCI spec) assume that this is done during
* system initialization, however the firmware does not do this
* at least on some models, and we probably shouldn't trust that
* the firmware uses the same model as this driver if it does.
* Additionally, set up the bus numbers and ranges.
*/
ofw_pci_init(dev, sc->sc_node, sc->sc_ign, &obd);
#endif /* OFW_NEWPCI */
device_add_child(dev, "pci", sc->sc_secbus);
return (bus_generic_attach(dev));
}
static void
psycho_set_intr(struct psycho_softc *sc, int index,
device_t dev, bus_addr_t map, int iflags, driver_intr_t handler)
{
int rid, vec;
u_int64_t mr;
mr = PSYCHO_READ8(sc, map);
vec = INTVEC(mr);
sc->sc_irq_res[index] = bus_alloc_resource(dev, SYS_RES_IRQ, &rid,
vec, vec, 1, RF_ACTIVE);
if (sc->sc_irq_res[index] == NULL)
panic("psycho_set_intr: failed to get interrupt");
bus_setup_intr(dev, sc->sc_irq_res[index], INTR_TYPE_MISC | iflags,
handler, sc, &sc->sc_ihand[index]);
PSYCHO_WRITE8(sc, map, INTMAP_ENABLE(mr, PCPU_GET(mid)));
}
static int
psycho_find_intrmap(struct psycho_softc *sc, int ino, bus_addr_t *intrmapptr,
bus_addr_t *intrclrptr, bus_addr_t *intrdiagptr)
{
bus_addr_t intrmap, intrclr;
u_int64_t im;
u_long diag;
int found;
found = 0;
/* Hunt thru obio first */
diag = PSYCHO_READ8(sc, PSR_OBIO_INT_DIAG);
for (intrmap = PSR_SCSI_INT_MAP, intrclr = PSR_SCSI_INT_CLR;
intrmap <= PSR_SERIAL_INT_MAP; intrmap += 8, intrclr += 8,
diag >>= 2) {
im = PSYCHO_READ8(sc, intrmap);
if (INTINO(im) == ino) {
diag &= 2;
found = 1;
break;
}
}
if (!found) {
diag = PSYCHO_READ8(sc, PSR_PCI_INT_DIAG);
/* Now do PCI interrupts */
for (intrmap = PSR_PCIA0_INT_MAP, intrclr = PSR_PCIA0_INT_CLR;
intrmap <= PSR_PCIB3_INT_MAP; intrmap += 8, intrclr += 32,
diag >>= 8) {
if (sc->sc_mode == PSYCHO_MODE_PSYCHO &&
(intrmap == PSR_PCIA2_INT_MAP ||
intrmap == PSR_PCIA3_INT_MAP))
continue;
im = PSYCHO_READ8(sc, intrmap);
if (((im ^ ino) & 0x3c) == 0) {
intrclr += 8 * (ino & 3);
diag = (diag >> ((ino & 3) * 2)) & 2;
found = 1;
break;
}
}
}
if (intrmapptr != NULL)
*intrmapptr = intrmap;
if (intrclrptr != NULL)
*intrclrptr = intrclr;
if (intrdiagptr != NULL)
*intrdiagptr = diag;
return (found);
}
/* grovel the OBP for various psycho properties */
static void
psycho_get_ranges(phandle_t node, struct upa_ranges **rp, int *np)
{
*np = OF_getprop_alloc(node, "ranges", sizeof(**rp), (void **)rp);
if (*np == -1)
panic("could not get psycho ranges");
}
/*
* Interrupt handlers.
*/
static void
psycho_ue(void *arg)
{
struct psycho_softc *sc = (struct psycho_softc *)arg;
u_int64_t afar, afsr;
afar = PSYCHO_READ8(sc, PSR_UE_AFA);
afsr = PSYCHO_READ8(sc, PSR_UE_AFS);
/*
* On the UltraSPARC-IIi/IIe, IOMMU misses/protection faults cause
* the AFAR to be set to the physical address of the TTE entry that
* was invalid/write protected. Call into the iommu code to have
* them decoded to virtual IO addresses.
*/
if ((afsr & UEAFSR_P_DTE) != 0)
iommu_decode_fault(sc->sc_is, afar);
/* It's uncorrectable. Dump the regs and panic. */
panic("%s: uncorrectable DMA error AFAR %#lx AFSR %#lx",
device_get_name(sc->sc_dev), (u_long)afar, (u_long)afsr);
}
static void
psycho_ce(void *arg)
{
struct psycho_softc *sc = (struct psycho_softc *)arg;
u_int64_t afar, afsr;
afar = PSYCHO_READ8(sc, PSR_CE_AFA);
afsr = PSYCHO_READ8(sc, PSR_CE_AFS);
/* It's correctable. Dump the regs and continue. */
device_printf(sc->sc_dev, "correctable DMA error AFAR %#lx "
"AFSR %#lx\n", (u_long)afar, (u_long)afsr);
/* Clear the error bits that we caught. */
PSYCHO_WRITE8(sc, PSR_CE_AFS, afsr & CEAFSR_ERRMASK);
PSYCHO_WRITE8(sc, PSR_CE_INT_CLR, 0);
}
static void
psycho_bus_a(void *arg)
{
struct psycho_softc *sc = (struct psycho_softc *)arg;
u_int64_t afar, afsr;
afar = PSYCHO_READ8(sc, PSR_PCICTL0 + PCR_AFA);
afsr = PSYCHO_READ8(sc, PSR_PCICTL0 + PCR_AFS);
/* It's uncorrectable. Dump the regs and panic. */
panic("%s: PCI bus A error AFAR %#lx AFSR %#lx",
device_get_name(sc->sc_dev), (u_long)afar, (u_long)afsr);
}
static void
psycho_bus_b(void *arg)
{
struct psycho_softc *sc = (struct psycho_softc *)arg;
u_int64_t afar, afsr;
afar = PSYCHO_READ8(sc, PSR_PCICTL1 + PCR_AFA);
afsr = PSYCHO_READ8(sc, PSR_PCICTL1 + PCR_AFS);
/* It's uncorrectable. Dump the regs and panic. */
panic("%s: PCI bus B error AFAR %#lx AFSR %#lx",
device_get_name(sc->sc_dev), (u_long)afar, (u_long)afsr);
}
static void
psycho_powerfail(void *arg)
{
/* We lost power. Try to shut down NOW. */
#ifdef DEBUGGER_ON_POWERFAIL
struct psycho_softc *sc = (struct psycho_softc *)arg;
Debugger("powerfail");
PSYCHO_WRITE8(sc, PSR_POWER_INT_CLR, 0);
#else
printf("Power Failure Detected: Shutting down NOW.\n");
shutdown_nice(0);
#endif
}
#ifdef PSYCHO_MAP_WAKEUP
static void
psycho_wakeup(void *arg)
{
struct psycho_softc *sc = (struct psycho_softc *)arg;
PSYCHO_WRITE8(sc, PSR_PWRMGT_INT_CLR, 0);
/* Gee, we don't really have a framework to deal with this properly. */
device_printf(sc->sc_dev, "power management wakeup\n");
}
#endif /* PSYCHO_MAP_WAKEUP */
/* initialise the IOMMU... */
void
psycho_iommu_init(struct psycho_softc *sc, int tsbsize)
{
char *name;
struct iommu_state *is = sc->sc_is;
/* punch in our copies */
is->is_bustag = sc->sc_bustag;
is->is_bushandle = sc->sc_bushandle;
is->is_iommu = PSR_IOMMU;
is->is_dtag = PSR_IOMMU_TLB_TAG_DIAG;
is->is_ddram = PSR_IOMMU_TLB_DATA_DIAG;
is->is_dqueue = PSR_IOMMU_QUEUE_DIAG;
is->is_dva = PSR_IOMMU_SVADIAG;
is->is_dtcmp = PSR_IOMMU_TLB_CMP_DIAG;
/* give us a nice name.. */
name = (char *)malloc(32, M_DEVBUF, M_NOWAIT);
if (name == 0)
panic("couldn't malloc iommu name");
snprintf(name, 32, "%s dvma", device_get_name(sc->sc_dev));
iommu_init(name, is, tsbsize, sc->sc_dvmabase, 0);
}
#ifndef OFW_NEWPCI
static void
psycho_binit(device_t busdev, struct ofw_pci_bdesc *obd)
{
#ifdef PSYCHO_DEBUG
printf("psycho at %u/%u/%u: setting bus #s to %u/%u/%u\n",
obd->obd_bus, obd->obd_slot, obd->obd_func, obd->obd_bus,
obd->obd_secbus, obd->obd_subbus);
#endif /* PSYCHO_DEBUG */
PCIB_WRITE_CONFIG(busdev, obd->obd_bus, obd->obd_slot, obd->obd_func,
PCSR_SUBBUS, obd->obd_subbus, 1);
}
#endif
static int
psycho_maxslots(device_t dev)
{
/* XXX: is this correct? */
return (PCI_SLOTMAX);
}
#ifndef OFW_NEWPCI
/*
* Keep a table of quirky PCI devices that need fixups before the MI PCI code
* creates the resource lists. This needs to be moved around once other bus
* drivers are added. Moving it to the MI code should maybe be reconsidered
* if one of these devices appear in non-sparc64 boxen. It's likely that not
* all BIOSes/firmwares can deal with them.
*/
struct psycho_dquirk {
u_int32_t dq_devid;
int dq_quirk;
};
/* Quirk types. May be or'ed together. */
#define DQT_BAD_INTPIN 1 /* Intpin reg 0, but intpin used */
static struct psycho_dquirk dquirks[] = {
{ 0x1001108e, DQT_BAD_INTPIN }, /* Sun HME (PCIO func. 1) */
{ 0x1101108e, DQT_BAD_INTPIN }, /* Sun GEM (PCIO2 func. 1) */
{ 0x1102108e, DQT_BAD_INTPIN }, /* Sun FireWire ctl. (PCIO2 func. 2) */
{ 0x1103108e, DQT_BAD_INTPIN }, /* Sun USB ctl. (PCIO2 func. 3) */
};
#endif /* !OFW_NEWPCI */
#define NDQUIRKS (sizeof(dquirks) / sizeof(dquirks[0]))
static u_int32_t
psycho_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
int width)
{
struct psycho_softc *sc;
bus_space_handle_t bh;
u_long offset = 0;
#ifndef OFW_NEWPCI
u_int32_t devid;
#endif
u_int8_t byte;
u_int16_t shrt;
u_int32_t wrd;
u_int32_t r;
int i;
sc = (struct psycho_softc *)device_get_softc(dev);
offset = PSYCHO_CONF_OFF(bus, slot, func, reg);
bh = sc->sc_bh[PCI_CS_CONFIG];
switch (width) {
case 1:
i = bus_space_peek_1(sc->sc_cfgt, bh, offset, &byte);
r = byte;
break;
case 2:
i = bus_space_peek_2(sc->sc_cfgt, bh, offset, &shrt);
r = shrt;
break;
case 4:
i = bus_space_peek_4(sc->sc_cfgt, bh, offset, &wrd);
r = wrd;
break;
default:
panic("psycho_read_config: bad width");
}
if (i) {
#ifdef PSYCHO_DEBUG
printf("psycho read data error reading: %d.%d.%d: 0x%x\n",
bus, slot, func, reg);
#endif
r = -1;
}
#ifndef OFW_NEWPCI
if (reg == PCIR_INTPIN && r == 0) {
/* Check for DQT_BAD_INTPIN quirk. */
devid = psycho_read_config(dev, bus, slot, func,
PCIR_DEVVENDOR, 4);
for (i = 0; i < NDQUIRKS; i++) {
if (dquirks[i].dq_devid == devid) {
/*
* Need to set the intpin to a value != 0 so
* that the MI code will think that this device
* has an interrupt.
* Just use 1 (intpin a) for now. This is, of
* course, bogus, but since interrupts are
* routed in advance, this does not really
* matter.
*/
if ((dquirks[i].dq_quirk & DQT_BAD_INTPIN) != 0)
r = 1;
break;
}
}
}
#endif /* !OFW_NEWPCI */
return (r);
}
static void
psycho_write_config(device_t dev, u_int bus, u_int slot, u_int func,
u_int reg, u_int32_t val, int width)
{
struct psycho_softc *sc;
bus_space_handle_t bh;
u_long offset = 0;
sc = (struct psycho_softc *)device_get_softc(dev);
offset = PSYCHO_CONF_OFF(bus, slot, func, reg);
bh = sc->sc_bh[PCI_CS_CONFIG];
switch (width) {
case 1:
bus_space_write_1(sc->sc_cfgt, bh, offset, val);
break;
case 2:
bus_space_write_2(sc->sc_cfgt, bh, offset, val);
break;
case 4:
bus_space_write_4(sc->sc_cfgt, bh, offset, val);
break;
default:
panic("psycho_write_config: bad width");
}
}
static int
psycho_route_interrupt(device_t bridge, device_t dev, int pin)
{
#ifdef OFW_NEWPCI
struct psycho_softc *sc = device_get_softc(bridge);
struct ofw_pci_register reg;
bus_addr_t intrmap;
phandle_t node = ofw_pci_get_node(dev);
ofw_pci_intr_t pintr, mintr;
u_int8_t maskbuf[sizeof(reg) + sizeof(pintr)];
pintr = pin;
if (ofw_bus_lookup_imap(node, &sc->sc_iinfo, &reg, sizeof(reg),
&pintr, sizeof(pintr), &mintr, sizeof(mintr), maskbuf))
return (mintr);
/*
* If this is outside of the range for an intpin, it's likely a full
* INO, and no mapping is required at all; this happens on the u30,
* where there's no interrupt map at the psycho node. Fortunately,
* there seem to be no INOs in the intpin range on this boxen, so
* this easy heuristics will do.
*/
if (pin > 4)
return (pin);
/*
* Guess the INO; we always assume that this is a non-OBIO
* device, and that pin is a "real" intpin number. Determine
* the mapping register to be used by the slot number.
* We only need to do this on e450s, it seems; here, the slot numbers
* for bus A are one-based, while those for bus B seemingly have an
* offset of 2 (hence the factor of 3 below).
*/
intrmap = PSR_PCIA0_INT_MAP +
8 * (pci_get_slot(dev) - 1 + 3 * sc->sc_half);
mintr = INTINO(PSYCHO_READ8(sc, intrmap)) + pin - 1;
device_printf(bridge, "guessing interrupt %d for device %d/%d pin %d\n",
(int)mintr, pci_get_slot(dev), pci_get_function(dev), pin);
return (mintr);
#else
/*
* XXX: ugly loathsome hack:
* We can't use ofw_pci_route_intr() here; the device passed may be
* the one of a bridge, so the original device can't be recovered.
*
* We need to use the firmware to route interrupts, however it has
* no interface which could be used to interpret intpins; instead,
* all assignments are done by device.
*
* The MI pci code will try to reroute interrupts of 0, although they
* are correct; all other interrupts are preinitialized, so if we
* get here, the intline is either 0 (so return 0), or we hit a
* device which was not preinitialized (e.g. hotplugged stuff), in
* which case we are lost.
*/
return (0);
#endif /* OFW_NEWPCI */
}
static int
psycho_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct psycho_softc *sc;
sc = (struct psycho_softc *)device_get_softc(dev);
switch (which) {
case PCIB_IVAR_BUS:
*result = sc->sc_secbus;
return (0);
}
return (ENOENT);
}
/* Write to the correct clr register, and call the actual handler. */
static void
psycho_intr_stub(void *arg)
{
struct psycho_clr *pc;
pc = (struct psycho_clr *)arg;
pc->pci_handler(pc->pci_arg);
PSYCHO_WRITE8(pc->pci_sc, pc->pci_clr, 0);
}
static int
psycho_setup_intr(device_t dev, device_t child,
struct resource *ires, int flags, driver_intr_t *intr, void *arg,
void **cookiep)
{
struct psycho_softc *sc;
struct psycho_clr *pc;
bus_addr_t intrmapptr, intrclrptr;
long vec = rman_get_start(ires);
u_int64_t mr;
int ino, error;
sc = (struct psycho_softc *)device_get_softc(dev);
pc = (struct psycho_clr *)malloc(sizeof(*pc), M_DEVBUF, M_NOWAIT);
if (pc == NULL)
return (NULL);
/*
* Hunt through all the interrupt mapping regs to look for our
* interrupt vector.
*
* XXX We only compare INOs rather than IGNs since the firmware may
* not provide the IGN and the IGN is constant for all device on that
* PCI controller. This could cause problems for the FFB/external
* interrupt which has a full vector that can be set arbitrarily.
*/
ino = INTINO(vec);
if (!psycho_find_intrmap(sc, ino, &intrmapptr, &intrclrptr, NULL)) {
device_printf(dev, "Cannot find interrupt vector %lx\n", vec);
free(pc, M_DEVBUF);
return (NULL);
}
#ifdef PSYCHO_DEBUG
device_printf(dev, "psycho_setup_intr: INO %d, map %#lx, clr %#lx\n",
ino, (u_long)intrmapptr, (u_long)intrclrptr);
#endif
pc->pci_sc = sc;
pc->pci_arg = arg;
pc->pci_handler = intr;
pc->pci_clr = intrclrptr;
/* Disable the interrupt while we fiddle with it */
mr = PSYCHO_READ8(sc, intrmapptr);
PSYCHO_WRITE8(sc, intrmapptr, mr & ~INTMAP_V);
error = BUS_SETUP_INTR(device_get_parent(dev), child, ires, flags,
psycho_intr_stub, pc, cookiep);
if (error != 0) {
free(pc, M_DEVBUF);
return (error);
}
pc->pci_cookie = *cookiep;
*cookiep = pc;
/*
* Clear the interrupt, it might have been triggered before it was
* set up.
*/
PSYCHO_WRITE8(sc, intrclrptr, 0);
/*
* Enable the interrupt and program the target module now we have the
* handler installed.
*/
PSYCHO_WRITE8(sc, intrmapptr, INTMAP_ENABLE(mr, PCPU_GET(mid)));
return (error);
}
static int
psycho_teardown_intr(device_t dev, device_t child,
struct resource *vec, void *cookie)
{
struct psycho_clr *pc;
int error;
pc = (struct psycho_clr *)cookie;
error = BUS_TEARDOWN_INTR(device_get_parent(dev), child, vec,
pc->pci_cookie);
/*
* Don't disable the interrupt for now, so that stray interupts get
* detected...
*/
if (error != 0)
free(pc, M_DEVBUF);
return (error);
}
static struct resource *
psycho_alloc_resource(device_t bus, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct psycho_softc *sc;
struct resource *rv;
struct rman *rm;
bus_space_tag_t bt;
bus_space_handle_t bh;
int needactivate = flags & RF_ACTIVE;
flags &= ~RF_ACTIVE;
sc = (struct psycho_softc *)device_get_softc(bus);
if (type == SYS_RES_IRQ) {
/*
* XXX: Don't accept blank ranges for now, only single
* interrupts. The other case should not happen with the MI pci
* code...
* XXX: This may return a resource that is out of the range
* that was specified. Is this correct...?
*/
if (start != end)
panic("psycho_alloc_resource: XXX: interrupt range");
start = end |= sc->sc_ign;
return (bus_alloc_resource(bus, type, rid, start, end,
count, flags));
}
switch (type) {
case SYS_RES_MEMORY:
rm = &sc->sc_mem_rman;
bt = sc->sc_memt;
bh = sc->sc_bh[PCI_CS_MEM32];
break;
case SYS_RES_IOPORT:
rm = &sc->sc_io_rman;
bt = sc->sc_iot;
bh = sc->sc_bh[PCI_CS_IO];
break;
default:
return (NULL);
}
rv = rman_reserve_resource(rm, start, end, count, flags, child);
if (rv == NULL)
return (NULL);
bh += rman_get_start(rv);
rman_set_bustag(rv, bt);
rman_set_bushandle(rv, bh);
if (needactivate) {
if (bus_activate_resource(child, type, *rid, rv)) {
rman_release_resource(rv);
return (NULL);
}
}
return (rv);
}
static int
psycho_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
void *p;
int error;
if (type == SYS_RES_IRQ)
return (bus_activate_resource(bus, type, rid, r));
if (type == SYS_RES_MEMORY) {
/*
* Need to memory-map the device space, as some drivers depend
* on the virtual address being set and useable.
*/
error = sparc64_bus_mem_map(rman_get_bustag(r),
rman_get_bushandle(r), rman_get_size(r), 0, NULL, &p);
if (error != 0)
return (error);
rman_set_virtual(r, p);
}
return (rman_activate_resource(r));
}
static int
psycho_deactivate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
if (type == SYS_RES_IRQ)
return (bus_deactivate_resource(bus, type, rid, r));
if (type == SYS_RES_MEMORY) {
sparc64_bus_mem_unmap(rman_get_virtual(r), rman_get_size(r));
rman_set_virtual(r, NULL);
}
return (rman_deactivate_resource(r));
}
static int
psycho_release_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
int error;
if (type == SYS_RES_IRQ)
return (bus_release_resource(bus, type, rid, r));
if (rman_get_flags(r) & RF_ACTIVE) {
error = bus_deactivate_resource(child, type, rid, r);
if (error)
return error;
}
return (rman_release_resource(r));
}
static int
psycho_intr_pending(device_t dev, ofw_pci_intr_t intr)
{
struct psycho_softc *sc;
u_long diag;
sc = (struct psycho_softc *)device_get_softc(dev);
if (!psycho_find_intrmap(sc, intr, NULL, NULL, &diag)) {
device_printf(dev, "psycho_intr_pending: mapping not found for"
" %d\n", intr);
return (0);
}
return (diag != 0);
}
#ifndef OFW_NEWPCI
static ofw_pci_intr_t
psycho_guess_ino(device_t dev, phandle_t node, u_int slot, u_int pin)
{
struct psycho_softc *sc = (struct psycho_softc *)device_get_softc(dev);
bus_addr_t intrmap;
/*
* If this is not for one of our direct children (i.e. we are mapping
* at our node), tell the interrupt mapper to go on - we need the
* slot number of the device or it's topmost parent bridge to guess
* the INO.
*/
if (node != sc->sc_node)
return (PCI_INVALID_IRQ);
/*
* Actually guess the INO. We always assume that this is a non-OBIO
* device, and use from the slot number to determine it.
* We only need to do this on e450s, it seems; here, the slot numbers
* for bus A are one-based, while those for bus B seemingly have an
* offset of 2 (hence the factor of 3 below).
*/
intrmap = PSR_PCIA0_INT_MAP + 8 * (slot - 1 + 3 * sc->sc_half);
return (INTINO(PSYCHO_READ8(sc, intrmap)) + pin - 1);
}
#endif /* !OFW_NEWPCI */
static bus_space_handle_t
psycho_get_bus_handle(device_t dev, int type, bus_space_handle_t childhdl,
bus_space_tag_t *tag)
{
struct psycho_softc *sc;
sc = (struct psycho_softc *)device_get_softc(dev);
switch (type) {
case SYS_RES_IOPORT:
*tag = sc->sc_iot;
return (sc->sc_bh[PCI_CS_IO] + childhdl);
case SYS_RES_MEMORY:
*tag = sc->sc_memt;
return (sc->sc_bh[PCI_CS_MEM32] + childhdl);
default:
panic("psycho_get_bus_handle: illegal space\n");
}
}
#ifdef OFW_NEWPCI
static phandle_t
psycho_get_node(device_t bus, device_t dev)
{
struct psycho_softc *sc = device_get_softc(bus);
/* We only have one child, the PCI bus, which needs our own node. */
return (sc->sc_node);
}
static void
psycho_adjust_busrange(device_t dev, u_int subbus)
{
struct psycho_softc *sc = device_get_softc(dev);
/* If necessary, adjust the subordinate bus number register. */
if (subbus > sc->sc_subbus) {
#ifdef PSYCHO_DEBUG
device_printf(dev,
"adjusting secondary bus number from %d to %d\n",
sc->sc_subbus, subbus);
#endif
sc->sc_subbus = subbus;
PCIB_WRITE_CONFIG(dev, sc->sc_secbus, PCS_DEVICE, PCS_FUNC,
PCSR_SUBBUS, subbus, 1);
}
}
#endif
/*
* below here is bus space and bus dma support
*/
static bus_space_tag_t
psycho_alloc_bus_tag(struct psycho_softc *sc, int type)
{
bus_space_tag_t bt;
bt = (bus_space_tag_t)malloc(sizeof(struct bus_space_tag), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (bt == NULL)
panic("psycho_alloc_bus_tag: out of memory");
bzero(bt, sizeof *bt);
bt->bst_cookie = sc;
bt->bst_parent = sc->sc_bustag;
bt->bst_type = type;
return (bt);
}