freebsd kernel with SKQ
Go to file
Andrey V. Elsukov 1d904a55c8 Remove the check for packets with broadcast source from if_gif's encapcheck.
The check was recommened in the draft-ietf-ngtrans-mech-05.txt. But it isn't
clear, should it compare the source with all direct broadcast addresses in the
system or not.
RFC 4213 says it is enough to verify that the source address is the address
of the encapsulator, as configured on the decapsulator. And this verification
can be extended by administrator with any other forms of IPv4 ingress filtering.

Discussed with:	glebius, melifaro
Sponsored by:	Yandex LLC
2014-10-31 15:23:24 +00:00
bin Treat IFS separators in "$*" as quoted. 2014-10-28 22:14:31 +00:00
cddl Correct the calculation of tcps_rto in the struct tcpcb -> tcpsinfo_t 2014-10-21 05:19:08 +00:00
contrib rping: make sure that the CQ event thread can never poll a CQ after it 2014-10-29 06:24:12 +00:00
crypto Merge OpenSSL 1.0.1j. 2014-10-15 19:12:05 +00:00
etc This is the much-discussed major upgrade to the random(4) device, known to you all as /dev/random. 2014-10-30 21:21:53 +00:00
games Update factor for changes to types in primes, which is a dependency. 2014-09-27 10:57:34 +00:00
gnu Build gperf only if we're using g++ (not clang++) 2014-10-09 23:05:31 +00:00
include Fix the build by installing acpi_hpet.h correctly. 2014-10-24 23:25:11 +00:00
kerberos5 Fix incremental builds involving non-root users with read-only source files. 2014-09-18 14:50:21 +00:00
lib Update acl(3) to expand on NFSv4 ACL support. 2014-10-30 10:56:38 +00:00
libexec This is the much-discussed major upgrade to the random(4) device, known to you all as /dev/random. 2014-10-30 21:21:53 +00:00
release Fix a few issues with creating VOLUME_LABEL for the 2014-10-26 01:41:54 +00:00
rescue Remove duplicate prog. 2014-09-28 08:59:38 +00:00
sbin Print human-readable error for "route not found" case. 2014-10-31 13:37:47 +00:00
secure Merge OpenSSL 1.0.1j. 2014-10-15 19:29:22 +00:00
share Use the right depend file for each program. 2014-10-30 22:07:29 +00:00
sys Remove the check for packets with broadcast source from if_gif's encapcheck. 2014-10-31 15:23:24 +00:00
tests Fix source address selection on unbound sockets in the presence of multiple 2014-09-16 15:28:19 +00:00
tools Remove an extra copy of hv_kvp_daemon(8) [1]. 2014-10-27 21:29:42 +00:00
usr.bin fix spelling of offset since that is what is used in the body... 2014-10-30 06:54:25 +00:00
usr.sbin Rework the EXAMPLES section to be a bit clearer. 2014-10-29 18:01:09 +00:00
.arcconfig Update the URL to the phabricator instance. 2014-08-14 16:25:43 +00:00
.arclint arc: add linting for python files 2014-06-02 00:21:42 +00:00
COPYRIGHT Bump copyright year. 2013-12-31 12:18:10 +00:00
LOCKS
MAINTAINERS add myself as opencrypto maintainer as I'm doing some work in the 2014-08-11 19:03:20 +00:00
Makefile Import OpenSSL 1.0.1j. 2014-10-15 17:32:57 +00:00
Makefile.inc1 Rename XFLAGS to XCFLAGS and XXFLAGS to XCXXFLAGS 2014-10-27 23:31:07 +00:00
ObsoleteFiles.inc Add /etc/rc.d/initrandom, which was removed in r273872. 2014-10-31 14:22:26 +00:00
README Import OpenSSL 1.0.1j. 2014-10-15 17:32:57 +00:00
UPDATING Build gperf only if we're using g++ (not clang++) 2014-10-09 23:05:31 +00:00

This is the top level of the FreeBSD source directory.  This file
was last revised on:
$FreeBSD$

For copyright information, please see the file COPYRIGHT in this
directory (additional copyright information also exists for some
sources in this tree - please see the specific source directories for
more information).

The Makefile in this directory supports a number of targets for
building components (or all) of the FreeBSD source tree, the most
commonly used one being ``world'', which rebuilds and installs
everything in the FreeBSD system from the source tree except the
kernel, the kernel-modules and the contents of /etc.  The ``world''
target should only be used in cases where the source tree has not
changed from the currently running version.  See:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
for more information, including setting make(1) variables.

The ``buildkernel'' and ``installkernel'' targets build and install
the kernel and the modules (see below).  Please see the top of
the Makefile in this directory for more information on the
standard build targets and compile-time flags.

Building a kernel is a somewhat more involved process, documentation
for which can be found at:
   http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
And in the config(8) man page.
Note: If you want to build and install the kernel with the
``buildkernel'' and ``installkernel'' targets, you might need to build
world before.  More information is available in the handbook.

The sample kernel configuration files reside in the sys/<arch>/conf
sub-directory (assuming that you've installed the kernel sources), the
file named GENERIC being the one used to build your initial installation
kernel.  The file NOTES contains entries and documentation for all possible
devices, not just those commonly used.  It is the successor of the ancient
LINT file, but in contrast to LINT, it is not buildable as a kernel but a
pure reference and documentation file.


Source Roadmap:
---------------
bin		System/user commands.

cddl		Various commands and libraries under the Common Development
		and Distribution License.

contrib		Packages contributed by 3rd parties.

crypto		Cryptography stuff (see crypto/README).

etc		Template files for /etc.

games		Amusements.

gnu		Various commands and libraries under the GNU Public License.
		Please see gnu/COPYING* for more information.

include		System include files.

kerberos5	Kerberos5 (Heimdal) package.

lib		System libraries.

libexec		System daemons.

release		Release building Makefile & associated tools.

rescue		Build system for statically linked /rescue utilities.

sbin		System commands.

secure		Cryptographic libraries and commands.

share		Shared resources.

sys		Kernel sources.

tools		Utilities for regression testing and miscellaneous tasks.

usr.bin		User commands.

usr.sbin	System administration commands.


For information on synchronizing your source tree with one or more of
the FreeBSD Project's development branches, please see:

  http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html