freebsd-skq/sys/arm/mv/mv_sata.c
mav d5157b7469 Set of legacy mode SATA enchancements:
- Implement proper combined mode decoding for Intel controllers to properly
identify SATA and PATA channels and associate ATA channels with SATA ports.
This fixes wrong reporting and in some cases hard resets to wrong SATA ports.
- Improve SATA registers support to handle hot-plug events and potentially
interface errors. For ICH5/6300ESB chipsets these registers accessible via
PCI config space. For later ones they may be accessible via PCI BAR(5).
- For controllers not generating interrupts on hot-plug events, implement
periodic status polling. Use it to detect hot-plug on Intel and VIA
controllers. Same probably could also be used for Serverworks and SIS.
2010-10-18 11:30:13 +00:00

873 lines
23 KiB
C

/*-
* Copyright (C) 2008-2009 Semihalf
* All rights reserved.
*
* Initial version developed by Ilya Bakulin. Full functionality and bringup
* by Piotr Ziecik.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/lock.h>
#include <sys/resource.h>
#include <sys/systm.h>
#include <sys/rman.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/endian.h>
#include <sys/sema.h>
#include <sys/taskqueue.h>
#include <vm/uma.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/ata.h>
#include <dev/ata/ata-all.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include "ata_if.h"
#include "mvreg.h"
#include "mvvar.h"
/* Useful macros */
#define EDMA_TIMEOUT 100000 /* 100 ms */
#define SATA_INL(sc, reg) ATA_INL((sc)->sc_mem_res, reg)
#define SATA_OUTL(sc, reg, val) ATA_OUTL((sc)->sc_mem_res, reg, val)
/* HW-related data structures */
struct sata_prdentry {
uint32_t prd_addrlo;
uint32_t prd_count;
uint32_t prd_addrhi;
uint32_t prd_reserved;
};
struct sata_crqb {
uint32_t crqb_prdlo;
uint32_t crqb_prdhi;
uint32_t crqb_flags;
uint16_t crqb_count;
uint16_t crqb_reserved1[2];
uint8_t crqb_ata_command;
uint8_t crqb_ata_feature;
uint8_t crqb_ata_lba_low;
uint8_t crqb_ata_lba_mid;
uint8_t crqb_ata_lba_high;
uint8_t crqb_ata_device;
uint8_t crqb_ata_lba_low_p;
uint8_t crqb_ata_lba_mid_p;
uint8_t crqb_ata_lba_high_p;
uint8_t crqb_ata_feature_p;
uint8_t crqb_ata_count;
uint8_t crqb_ata_count_p;
uint16_t crqb_reserved2;
};
struct sata_crpb {
uint8_t crpb_tag;
uint8_t crpb_reserved;
uint8_t crpb_edma_status;
uint8_t crpb_dev_status;
uint32_t crpb_timestamp;
};
/* Identification section. */
struct sata_softc {
device_t sc_dev;
unsigned int sc_version;
unsigned int sc_edma_qlen;
uint32_t sc_edma_reqis_mask;
uint32_t sc_edma_resos_mask;
struct resource *sc_mem_res;
bus_space_tag_t sc_mem_res_bustag;
bus_space_handle_t sc_mem_res_bushdl;
struct resource *sc_irq_res;
void *sc_irq_cookiep;
struct {
void (*function)(void *);
void *argument;
} sc_interrupt[SATA_CHAN_NUM];
};
/* Controller functions */
static int sata_probe(device_t dev);
static int sata_attach(device_t dev);
static int sata_detach(device_t dev);
static void sata_intr(void*);
static struct resource * sata_alloc_resource(device_t dev, device_t child,
int type, int *rid, u_long start, u_long end, u_long count, u_int flags);
static int sata_release_resource(device_t dev, device_t child, int type,
int rid, struct resource *r);
static int sata_setup_intr(device_t dev, device_t child,
struct resource *irq, int flags, driver_filter_t *filt,
driver_intr_t *function, void *argument, void **cookiep);
static int sata_teardown_intr(device_t dev, device_t child,
struct resource *irq, void *cookie);
/* Channel functions */
static int sata_channel_probe(device_t dev);
static int sata_channel_attach(device_t dev);
static int sata_channel_detach(device_t dev);
static int sata_channel_begin_transaction(struct ata_request *request);
static int sata_channel_end_transaction(struct ata_request *request);
static int sata_channel_status(device_t dev);
static int sata_channel_setmode(device_t dev, int target, int mode);
static int sata_channel_getrev(device_t dev, int target);
static void sata_channel_reset(device_t dev);
static void sata_channel_dmasetprd(void *xsc, bus_dma_segment_t *segs,
int nsegs, int error);
/* EDMA functions */
static int sata_edma_ctrl(device_t dev, int on);
static int sata_edma_is_running(device_t);
static device_method_t sata_methods[] = {
/* Device method */
DEVMETHOD(device_probe, sata_probe),
DEVMETHOD(device_attach, sata_attach),
DEVMETHOD(device_detach, sata_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* ATA bus methods. */
DEVMETHOD(bus_alloc_resource, sata_alloc_resource),
DEVMETHOD(bus_release_resource, sata_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, sata_setup_intr),
DEVMETHOD(bus_teardown_intr, sata_teardown_intr),
{ 0, 0 },
};
static driver_t sata_driver = {
"sata",
sata_methods,
sizeof(struct sata_softc),
};
devclass_t sata_devclass;
DRIVER_MODULE(sata, simplebus, sata_driver, sata_devclass, 0, 0);
MODULE_VERSION(sata, 1);
MODULE_DEPEND(sata, ata, 1, 1, 1);
static int
sata_probe(device_t dev)
{
struct sata_softc *sc;
uint32_t d, r;
if (!ofw_bus_is_compatible(dev, "mrvl,sata"))
return (ENXIO);
soc_id(&d, &r);
sc = device_get_softc(dev);
switch(d) {
case MV_DEV_88F5182:
sc->sc_version = 1;
sc->sc_edma_qlen = 128;
break;
case MV_DEV_88F6281:
case MV_DEV_MV78100:
case MV_DEV_MV78100_Z0:
sc->sc_version = 2;
sc->sc_edma_qlen = 32;
break;
default:
device_printf(dev, "unsupported SoC (ID: 0x%08X)!\n", d);
return (ENXIO);
}
sc->sc_edma_reqis_mask = (sc->sc_edma_qlen - 1) << SATA_EDMA_REQIS_OFS;
sc->sc_edma_resos_mask = (sc->sc_edma_qlen - 1) << SATA_EDMA_RESOS_OFS;
device_set_desc(dev, "Marvell Integrated SATA Controller");
return (0);
}
static int
sata_attach(device_t dev)
{
struct sata_softc *sc;
int mem_id, irq_id, error, i;
device_t ata_chan;
uint32_t reg;
sc = device_get_softc(dev);
sc->sc_dev = dev;
mem_id = 0;
irq_id = 0;
/* Allocate resources */
sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&mem_id, RF_ACTIVE);
if (sc->sc_mem_res == NULL) {
device_printf(dev, "could not allocate memory.\n");
return (ENOMEM);
}
sc->sc_mem_res_bustag = rman_get_bustag(sc->sc_mem_res);
sc->sc_mem_res_bushdl = rman_get_bushandle(sc->sc_mem_res);
KASSERT(sc->sc_mem_res_bustag && sc->sc_mem_res_bushdl,
("cannot get bus handle or tag."));
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &irq_id,
RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
device_printf(dev, "could not allocate IRQ.\n");
error = ENOMEM;
goto err;
}
error = bus_setup_intr(dev, sc->sc_irq_res,
INTR_TYPE_BIO | INTR_MPSAFE | INTR_ENTROPY,
NULL, sata_intr, sc, &sc->sc_irq_cookiep);
if (error != 0) {
device_printf(dev, "could not setup interrupt.\n");
goto err;
}
/* Attach channels */
for (i = 0; i < SATA_CHAN_NUM; i++) {
ata_chan = device_add_child(dev, "ata",
devclass_find_free_unit(ata_devclass, 0));
if (!ata_chan) {
device_printf(dev, "cannot add channel %d.\n", i);
error = ENOMEM;
goto err;
}
}
/* Disable interrupt coalescing */
reg = SATA_INL(sc, SATA_CR);
for (i = 0; i < SATA_CHAN_NUM; i++)
reg |= SATA_CR_COALDIS(i);
/* Disable DMA byte swapping */
if (sc->sc_version == 2)
reg |= SATA_CR_NODMABS | SATA_CR_NOEDMABS |
SATA_CR_NOPRDPBS;
SATA_OUTL(sc, SATA_CR, reg);
/* Clear and mask all interrupts */
SATA_OUTL(sc, SATA_ICR, 0);
SATA_OUTL(sc, SATA_MIMR, 0);
return(bus_generic_attach(dev));
err:
sata_detach(dev);
return (error);
}
static int
sata_detach(device_t dev)
{
struct sata_softc *sc;
sc = device_get_softc(dev);
if (device_is_attached(dev))
bus_generic_detach(dev);
if (sc->sc_mem_res != NULL) {
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(sc->sc_mem_res), sc->sc_mem_res);
sc->sc_mem_res = NULL;
}
if (sc->sc_irq_res != NULL) {
bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_irq_cookiep);
bus_release_resource(dev, SYS_RES_IRQ,
rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
sc->sc_irq_res = NULL;
}
return (0);
}
static struct resource *
sata_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct sata_softc *sc;
sc = device_get_softc(dev);
KASSERT(type == SYS_RES_IRQ && *rid == ATA_IRQ_RID,
("illegal resource request (type %u, rid %u).",
type, *rid));
return (sc->sc_irq_res);
}
static int
sata_release_resource(device_t dev, device_t child, int type, int rid,
struct resource *r)
{
KASSERT(type == SYS_RES_IRQ && rid == ATA_IRQ_RID,
("strange type %u and/or rid %u while releasing resource.", type,
rid));
return (0);
}
static int
sata_setup_intr(device_t dev, device_t child, struct resource *irq, int flags,
driver_filter_t *filt, driver_intr_t *function, void *argument,
void **cookiep)
{
struct sata_softc *sc;
struct ata_channel *ch;
sc = device_get_softc(dev);
ch = device_get_softc(child);
if (filt != NULL) {
device_printf(dev, "filter interrupts are not supported.\n");
return (EINVAL);
}
sc->sc_interrupt[ch->unit].function = function;
sc->sc_interrupt[ch->unit].argument = argument;
*cookiep = sc;
return (0);
}
static int
sata_teardown_intr(device_t dev, device_t child, struct resource *irq,
void *cookie)
{
struct sata_softc *sc;
struct ata_channel *ch;
sc = device_get_softc(dev);
ch = device_get_softc(child);
sc->sc_interrupt[ch->unit].function = NULL;
sc->sc_interrupt[ch->unit].argument = NULL;
return (0);
}
static void
sata_intr(void *xsc)
{
struct sata_softc *sc;
int unit;
sc = xsc;
/*
* Behave like ata_generic_intr() for PCI controllers.
* Simply invoke ISRs on all channels.
*/
for (unit = 0; unit < SATA_CHAN_NUM; unit++)
if (sc->sc_interrupt[unit].function != NULL)
sc->sc_interrupt[unit].function(
sc->sc_interrupt[unit].argument);
}
static int
sata_channel_probe(device_t dev)
{
device_set_desc(dev, "Marvell Integrated SATA Channel");
return (ata_probe(dev));
}
static int
sata_channel_attach(device_t dev)
{
struct sata_softc *sc;
struct ata_channel *ch;
uint64_t work;
int error, i;
sc = device_get_softc(device_get_parent(dev));
ch = device_get_softc(dev);
if (ch->attached)
return (0);
ch->dev = dev;
ch->unit = device_get_unit(dev);
ch->flags |= ATA_USE_16BIT | ATA_NO_SLAVE | ATA_SATA;
/* Set legacy ATA resources. */
for (i = ATA_DATA; i <= ATA_COMMAND; i++) {
ch->r_io[i].res = sc->sc_mem_res;
ch->r_io[i].offset = SATA_SHADOWR_BASE(ch->unit) + (i << 2);
}
ch->r_io[ATA_CONTROL].res = sc->sc_mem_res;
ch->r_io[ATA_CONTROL].offset = SATA_SHADOWR_CONTROL(ch->unit);
ch->r_io[ATA_IDX_ADDR].res = sc->sc_mem_res;
ata_default_registers(dev);
/* Set SATA resources. */
ch->r_io[ATA_SSTATUS].res = sc->sc_mem_res;
ch->r_io[ATA_SSTATUS].offset = SATA_SATA_SSTATUS(ch->unit);
ch->r_io[ATA_SERROR].res = sc->sc_mem_res;
ch->r_io[ATA_SERROR].offset = SATA_SATA_SERROR(ch->unit);
ch->r_io[ATA_SCONTROL].res = sc->sc_mem_res;
ch->r_io[ATA_SCONTROL].offset = SATA_SATA_SCONTROL(ch->unit);
ata_generic_hw(dev);
ch->hw.begin_transaction = sata_channel_begin_transaction;
ch->hw.end_transaction = sata_channel_end_transaction;
ch->hw.status = sata_channel_status;
/* Set DMA resources */
ata_dmainit(dev);
ch->dma.setprd = sata_channel_dmasetprd;
/* Clear work area */
KASSERT(sc->sc_edma_qlen * (sizeof(struct sata_crqb) +
sizeof(struct sata_crpb)) <= ch->dma.max_iosize,
("insufficient DMA memory for request/response queues.\n"));
bzero(ch->dma.work, sc->sc_edma_qlen * (sizeof(struct sata_crqb) +
sizeof(struct sata_crpb)));
bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
/* Turn off EDMA engine */
error = sata_edma_ctrl(dev, 0);
if (error) {
ata_dmafini(dev);
return (error);
}
/*
* Initialize EDMA engine:
* - Native Command Queuing off,
* - Non-Queued operation,
* - Host Queue Cache enabled.
*/
SATA_OUTL(sc, SATA_EDMA_CFG(ch->unit), SATA_EDMA_CFG_HQCACHE |
(sc->sc_version == 1) ? SATA_EDMA_CFG_QL128 : 0);
/* Set request queue pointers */
work = ch->dma.work_bus;
SATA_OUTL(sc, SATA_EDMA_REQBAHR(ch->unit), work >> 32);
SATA_OUTL(sc, SATA_EDMA_REQIPR(ch->unit), work & 0xFFFFFFFF);
SATA_OUTL(sc, SATA_EDMA_REQOPR(ch->unit), work & 0xFFFFFFFF);
/* Set response queue pointers */
work += sc->sc_edma_qlen * sizeof(struct sata_crqb);
SATA_OUTL(sc, SATA_EDMA_RESBAHR(ch->unit), work >> 32);
SATA_OUTL(sc, SATA_EDMA_RESIPR(ch->unit), work & 0xFFFFFFFF);
SATA_OUTL(sc, SATA_EDMA_RESOPR(ch->unit), work & 0xFFFFFFFF);
/* Clear any outstanding interrupts */
ATA_IDX_OUTL(ch, ATA_SERROR, ATA_IDX_INL(ch, ATA_SERROR));
SATA_OUTL(sc, SATA_SATA_FISICR(ch->unit), 0);
SATA_OUTL(sc, SATA_EDMA_IECR(ch->unit), 0);
SATA_OUTL(sc, SATA_ICR,
~(SATA_ICR_DEV(ch->unit) | SATA_ICR_DMADONE(ch->unit)));
/* Umask channel interrupts */
SATA_OUTL(sc, SATA_EDMA_IEMR(ch->unit), 0xFFFFFFFF);
SATA_OUTL(sc, SATA_MIMR, SATA_INL(sc, SATA_MIMR) |
SATA_MICR_DONE(ch->unit) | SATA_MICR_DMADONE(ch->unit) |
SATA_MICR_ERR(ch->unit));
ch->attached = 1;
return (ata_attach(dev));
}
static int
sata_channel_detach(device_t dev)
{
struct sata_softc *sc;
struct ata_channel *ch;
int error;
sc = device_get_softc(device_get_parent(dev));
ch = device_get_softc(dev);
if (!ch->attached)
return (0);
/* Turn off EDMA engine */
sata_edma_ctrl(dev, 0);
/* Mask chanel interrupts */
SATA_OUTL(sc, SATA_EDMA_IEMR(ch->unit), 0);
SATA_OUTL(sc, SATA_MIMR, SATA_INL(sc, SATA_MIMR) & ~(
SATA_MICR_DONE(ch->unit) | SATA_MICR_DMADONE(ch->unit) |
SATA_MICR_ERR(ch->unit)));
error = ata_detach(dev);
ata_dmafini(dev);
ch->attached = 0;
return (error);
}
static int
sata_channel_begin_transaction(struct ata_request *request)
{
struct sata_softc *sc;
struct ata_channel *ch;
struct sata_crqb *crqb;
uint32_t req_in;
int error, slot;
sc = device_get_softc(device_get_parent(request->parent));
ch = device_get_softc(request->parent);
mtx_assert(&ch->state_mtx, MA_OWNED);
/* Only DMA R/W goes through the EDMA machine. */
if (request->u.ata.command != ATA_READ_DMA &&
request->u.ata.command != ATA_WRITE_DMA &&
request->u.ata.command != ATA_READ_DMA48 &&
request->u.ata.command != ATA_WRITE_DMA48) {
/* Disable EDMA before accessing legacy registers */
if (sata_edma_is_running(request->parent)) {
error = sata_edma_ctrl(request->parent, 0);
if (error) {
request->result = error;
return (ATA_OP_FINISHED);
}
}
return (ata_begin_transaction(request));
}
/* Prepare data for DMA */
if ((error = ch->dma.load(request, NULL, NULL))) {
device_printf(request->parent, "setting up DMA failed!\n");
request->result = error;
return ATA_OP_FINISHED;
}
/* Get next free queue slot */
req_in = SATA_INL(sc, SATA_EDMA_REQIPR(ch->unit));
slot = (req_in & sc->sc_edma_reqis_mask) >> SATA_EDMA_REQIS_OFS;
crqb = (struct sata_crqb *)(ch->dma.work +
(slot << SATA_EDMA_REQIS_OFS));
/* Fill in request */
bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
crqb->crqb_prdlo = htole32((uint64_t)request->dma->sg_bus & 0xFFFFFFFF);
crqb->crqb_prdhi = htole32((uint64_t)request->dma->sg_bus >> 32);
crqb->crqb_flags = htole32((request->flags & ATA_R_READ ? 0x01 : 0x00) |
(request->tag << 1));
crqb->crqb_ata_command = request->u.ata.command;
crqb->crqb_ata_feature = request->u.ata.feature;
crqb->crqb_ata_lba_low = request->u.ata.lba;
crqb->crqb_ata_lba_mid = request->u.ata.lba >> 8;
crqb->crqb_ata_lba_high = request->u.ata.lba >> 16;
crqb->crqb_ata_device = ((request->u.ata.lba >> 24) & 0x0F) | (1 << 6);
crqb->crqb_ata_lba_low_p = request->u.ata.lba >> 24;
crqb->crqb_ata_lba_mid_p = request->u.ata.lba >> 32;
crqb->crqb_ata_lba_high_p = request->u.ata.lba >> 40;
crqb->crqb_ata_feature_p = request->u.ata.feature >> 8;
crqb->crqb_ata_count = request->u.ata.count;
crqb->crqb_ata_count_p = request->u.ata.count >> 8;
bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
/* Enable EDMA if disabled */
if (!sata_edma_is_running(request->parent)) {
error = sata_edma_ctrl(request->parent, 1);
if (error) {
ch->dma.unload(request);
request->result = error;
return (ATA_OP_FINISHED);
}
}
/* Tell EDMA about new request */
req_in = (req_in & ~sc->sc_edma_reqis_mask) | (((slot + 1) <<
SATA_EDMA_REQIS_OFS) & sc->sc_edma_reqis_mask);
SATA_OUTL(sc, SATA_EDMA_REQIPR(ch->unit), req_in);
return (ATA_OP_CONTINUES);
}
static int
sata_channel_end_transaction(struct ata_request *request)
{
struct sata_softc *sc;
struct ata_channel *ch;
struct sata_crpb *crpb;
uint32_t res_in, res_out, icr;
int slot;
sc = device_get_softc(device_get_parent(request->parent));
ch = device_get_softc(request->parent);
mtx_assert(&ch->state_mtx, MA_OWNED);
icr = SATA_INL(sc, SATA_ICR);
if (icr & SATA_ICR_DMADONE(ch->unit)) {
/* Get current response slot */
res_out = SATA_INL(sc, SATA_EDMA_RESOPR(ch->unit));
slot = (res_out & sc->sc_edma_resos_mask) >>
SATA_EDMA_RESOS_OFS;
crpb = (struct sata_crpb *)(ch->dma.work +
(sc->sc_edma_qlen * sizeof(struct sata_crqb)) +
(slot << SATA_EDMA_RESOS_OFS));
/* Record this request status */
bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
request->status = crpb->crpb_dev_status;
request->error = 0;
bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
/* Update response queue pointer */
res_out = (res_out & ~sc->sc_edma_resos_mask) | (((slot + 1) <<
SATA_EDMA_RESOS_OFS) & sc->sc_edma_resos_mask);
SATA_OUTL(sc, SATA_EDMA_RESOPR(ch->unit), res_out);
/* Ack DMA interrupt if there is nothing more to do */
res_in = SATA_INL(sc, SATA_EDMA_RESIPR(ch->unit));
res_in &= sc->sc_edma_resos_mask;
res_out &= sc->sc_edma_resos_mask;
if (res_in == res_out)
SATA_OUTL(sc, SATA_ICR,
~SATA_ICR_DMADONE(ch->unit));
/* Update progress */
if (!(request->status & ATA_S_ERROR) &&
!(request->flags & ATA_R_TIMEOUT))
request->donecount = request->bytecount;
/* Unload DMA data */
ch->dma.unload(request);
return(ATA_OP_FINISHED);
}
/* Legacy ATA interrupt */
return (ata_end_transaction(request));
}
static int
sata_channel_status(device_t dev)
{
struct sata_softc *sc;
struct ata_channel *ch;
uint32_t icr, iecr;
sc = device_get_softc(device_get_parent(dev));
ch = device_get_softc(dev);
icr = SATA_INL(sc, SATA_ICR);
iecr = SATA_INL(sc, SATA_EDMA_IECR(ch->unit));
if ((icr & SATA_ICR_DEV(ch->unit)) || iecr) {
/* Disable EDMA before accessing SATA registers */
sata_edma_ctrl(dev, 0);
ata_sata_phy_check_events(dev, -1);
/* Ack device and error interrupt */
SATA_OUTL(sc, SATA_ICR, ~SATA_ICR_DEV(ch->unit));
SATA_OUTL(sc, SATA_EDMA_IECR(ch->unit), 0);
}
icr &= SATA_ICR_DEV(ch->unit) | SATA_ICR_DMADONE(ch->unit);
return (icr);
}
static void
sata_channel_reset(device_t dev)
{
struct sata_softc *sc;
struct ata_channel *ch;
sc = device_get_softc(device_get_parent(dev));
ch = device_get_softc(dev);
/* Disable EDMA before using legacy registers */
sata_edma_ctrl(dev, 0);
/* Mask all EDMA interrups */
SATA_OUTL(sc, SATA_EDMA_IEMR(ch->unit), 0);
/* Reset EDMA */
SATA_OUTL(sc, SATA_EDMA_CMD(ch->unit), SATA_EDMA_CMD_RESET);
DELAY(25);
SATA_OUTL(sc, SATA_EDMA_CMD(ch->unit), 0);
/* Reset PHY and device */
if (ata_sata_phy_reset(dev, -1, 1))
ata_generic_reset(dev);
else
ch->devices = 0;
/* Clear EDMA errors */
SATA_OUTL(sc, SATA_SATA_FISICR(ch->unit), 0);
SATA_OUTL(sc, SATA_EDMA_IECR(ch->unit), 0);
/* Unmask all EDMA interrups */
SATA_OUTL(sc, SATA_EDMA_IEMR(ch->unit), 0xFFFFFFFF);
}
static int
sata_channel_setmode(device_t parent, int target, int mode)
{
/* Disable EDMA before using legacy registers */
sata_edma_ctrl(parent, 0);
return (ata_sata_setmode(parent, target, mode));
}
static int
sata_channel_getrev(device_t parent, int target)
{
/* Disable EDMA before using legacy registers */
sata_edma_ctrl(parent, 0);
return (ata_sata_getrev(parent, target));
}
static void
sata_channel_dmasetprd(void *xsc, bus_dma_segment_t *segs, int nsegs,
int error)
{
struct ata_dmasetprd_args *args;
struct sata_prdentry *prd;
int i;
args = xsc;
prd = args->dmatab;
if ((args->error = error))
return;
for (i = 0; i < nsegs; i++) {
prd[i].prd_addrlo = htole32(segs[i].ds_addr);
prd[i].prd_addrhi = htole32((uint64_t)segs[i].ds_addr >> 32);
prd[i].prd_count = htole32(segs[i].ds_len);
}
prd[i - 1].prd_count |= htole32(ATA_DMA_EOT);
KASSERT(nsegs <= ATA_DMA_ENTRIES, ("too many DMA segment entries.\n"));
args->nsegs = nsegs;
}
static int
sata_edma_ctrl(device_t dev, int on)
{
struct sata_softc *sc;
struct ata_channel *ch;
int bit, timeout;
uint32_t reg;
sc = device_get_softc(device_get_parent(dev));
ch = device_get_softc(dev);
bit = on ? SATA_EDMA_CMD_ENABLE : SATA_EDMA_CMD_DISABLE;
timeout = EDMA_TIMEOUT;
SATA_OUTL(sc, SATA_EDMA_CMD(ch->unit), bit);
while (1) {
DELAY(1);
reg = SATA_INL(sc, SATA_EDMA_CMD(ch->unit));
/* Enable bit will be 1 after disable command completion */
if (on && (reg & SATA_EDMA_CMD_ENABLE))
break;
/* Disable bit will be 0 after disable command completion */
if (!on && !(reg & SATA_EDMA_CMD_DISABLE))
break;
if (timeout-- <= 0) {
device_printf(dev, "EDMA command timeout!\n");
return (ETIMEDOUT);
}
}
return (0);
}
static int
sata_edma_is_running(device_t dev)
{
struct sata_softc *sc;
struct ata_channel *ch;
sc = device_get_softc(device_get_parent(dev));
ch = device_get_softc(dev);
return (SATA_INL(sc, SATA_EDMA_CMD(ch->unit)) & SATA_EDMA_CMD_ENABLE);
}
static device_method_t sata_channel_methods[] = {
/* Device interface. */
DEVMETHOD(device_probe, sata_channel_probe),
DEVMETHOD(device_attach, sata_channel_attach),
DEVMETHOD(device_detach, sata_channel_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, ata_suspend),
DEVMETHOD(device_resume, ata_resume),
/* ATA channel interface */
DEVMETHOD(ata_reset, sata_channel_reset),
DEVMETHOD(ata_setmode, sata_channel_setmode),
DEVMETHOD(ata_getrev, sata_channel_getrev),
{ 0, 0 }
};
driver_t sata_channel_driver = {
"ata",
sata_channel_methods,
sizeof(struct ata_channel),
};
DRIVER_MODULE(ata, sata, sata_channel_driver, ata_devclass, 0, 0);