3cf9b263cd
allow mrsas(4) from LSI to attach to newer LSI cards that are support by mrsas(4). If mrsas(4) is not loaded into the system at boot then mfi(4) will always attach. If a modified mrsas(4) is loaded in the system. That modification is return "-30" in it's probe since that is between BUS_PROBE_DEFAULT and BUS_PROBE_LOW_PRIORITY. This option is controller by a new probe flag "MFI_FLAGS_MRSAS" in mfi_ident that denotes cards that should work with mrsas(4). New entries that should have this option. This is the first step to get mrsas(4) checked into FreeBSD and to avoid collision with people that use mrsas(4) from LSI. Since mfi(4) takes priority, then mrsas(4) users need to rebuild GENERIC. Using the .disabled="1" method doesn't work since that blocks attaching and the probe gave it to mfi(4). Discussed with: LSI (Kashyap Desai)
149 lines
3.9 KiB
Groff
149 lines
3.9 KiB
Groff
.\" Copyright (c) 2006 Scott Long
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
.\" SUCH DAMAGE.
|
|
.\"
|
|
.\" $FreeBSD$
|
|
.\"
|
|
.Dd July 15, 2013
|
|
.Dt MFI 4
|
|
.Os
|
|
.Sh NAME
|
|
.Nm mfi
|
|
.Nd "LSI MegaRAID SAS driver"
|
|
.Sh SYNOPSIS
|
|
To compile this driver into the kernel,
|
|
place the following lines in your
|
|
kernel configuration file:
|
|
.Bd -ragged -offset indent
|
|
.Cd "device pci"
|
|
.Cd "device mfi"
|
|
.Ed
|
|
.Pp
|
|
Alternatively, to load the driver as a
|
|
module at boot time, place the following line in
|
|
.Xr loader.conf 5 :
|
|
.Bd -literal -offset indent
|
|
mfi_load="YES"
|
|
.Ed
|
|
.Sh DESCRIPTION
|
|
This driver is for LSI's next generation PCI Express SAS RAID controllers.
|
|
Access to RAID arrays (logical disks) from this driver is provided via
|
|
.Pa /dev/mfid?
|
|
device nodes.
|
|
A simple management interface is also provided on a per-controller basis via
|
|
the
|
|
.Pa /dev/mfi?
|
|
device node.
|
|
.Pp
|
|
The
|
|
.Nm
|
|
name is derived from the phrase "MegaRAID Firmware Interface", which is
|
|
substantially different than the old "MegaRAID" interface and thus requires
|
|
a new driver.
|
|
Older SCSI and SATA MegaRAID cards are supported by
|
|
.Xr amr 4
|
|
and will not work with this driver.
|
|
.Pp
|
|
Two sysctls are provided to tune the
|
|
.Nm
|
|
driver's behavior when a request is made to remove a mounted volume.
|
|
By default the driver will disallow any requests to remove a mounted volume.
|
|
If the sysctl
|
|
.Va dev.mfi.%d.delete_busy_volumes
|
|
is set to 1,
|
|
then the driver will allow mounted volumes to be removed.
|
|
.Pp
|
|
A tunable is provided to adjust the
|
|
.Nm
|
|
driver's behaviour when attaching to a card. By default the driver will
|
|
attach to all known cards with high probe priority. If the tunable
|
|
.Va hw.mfi.mrsas_enable
|
|
is set to 1,
|
|
then the driver will reduce its probe priority to allow
|
|
.Cd mrsas
|
|
to attach to the card instead of
|
|
.Nm .
|
|
.Sh HARDWARE
|
|
The
|
|
.Nm
|
|
driver supports the following hardware:
|
|
.Pp
|
|
.Bl -bullet -compact
|
|
.It
|
|
LSI MegaRAID SAS 1078
|
|
.It
|
|
LSI MegaRAID SAS 8408E
|
|
.It
|
|
LSI MegaRAID SAS 8480E
|
|
.It
|
|
LSI MegaRAID SAS 9240
|
|
.It
|
|
LSI MegaRAID SAS 9260
|
|
.It
|
|
Dell PERC5
|
|
.It
|
|
Dell PERC6
|
|
.It
|
|
IBM ServeRAID M1015 SAS/SATA
|
|
.It
|
|
IBM ServeRAID M1115 SAS/SATA
|
|
.It
|
|
IBM ServeRAID M5015 SAS/SATA
|
|
.It
|
|
IBM ServeRAID M5110 SAS/SATA
|
|
.It
|
|
IBM ServeRAID-MR10i
|
|
.It
|
|
Intel RAID Controller SRCSAS18E
|
|
.It
|
|
Intel RAID Controller SROMBSAS18E
|
|
.El
|
|
.Sh FILES
|
|
.Bl -tag -width ".Pa /dev/mfid?" -compact
|
|
.It Pa /dev/mfid?
|
|
array/logical disk interface
|
|
.It Pa /dev/mfi?
|
|
management interface
|
|
.El
|
|
.Sh DIAGNOSTICS
|
|
.Bl -diag
|
|
.It "mfid%d: Unable to delete busy device"
|
|
An attempt was made to remove a mounted volume.
|
|
.El
|
|
.Sh SEE ALSO
|
|
.Xr amr 4 ,
|
|
.Xr pci 4 ,
|
|
.Xr mfiutil 8
|
|
.Sh HISTORY
|
|
The
|
|
.Nm
|
|
driver first appeared in
|
|
.Fx 6.1 .
|
|
.Sh AUTHORS
|
|
The
|
|
.Nm
|
|
driver and this manual page were written by
|
|
.An Scott Long Aq scottl@FreeBSD.org .
|
|
.Sh BUGS
|
|
The driver does not support big-endian architectures at this time.
|