freebsd-skq/release/texts/alpha/RELNOTES.TXT
Bruce A. Mah d848d54c3f Hardware listing updates:
Make listings of dc(4)-supported cards consistent with manpage
(submitted by fenner).

amr(4) supports the Dell PERC 3/DCL (submitted by
Vivek Khera <khera@kciLink.com>).

Properly capitalize "Ethernet" and variants thereof.
2001-04-14 16:43:14 +00:00

1589 lines
58 KiB
Plaintext

RELEASE NOTES
FreeBSD Release 5.0-SNAP
(alpha Architecture)
This is a 5.0-CURRENT release SNAPshot of FreeBSD, an active
development branch which will produce its first release in late
2001. Those features which have also been back-ported to
the 4.x-stable branch (the next release for which will be 4.3)
are marked [MERGED].
Any installation failures or crashes should be reported by using the
send-pr command (those preferring a Web-based interface can also see
http://www.FreeBSD.org/send-pr.html).
For information about FreeBSD and the layout of the 5.0-RELEASE
directory (especially if you're installing from floppies!), see
ABOUT.TXT. For installation instructions, see the INSTALL.TXT and
HARDWARE.TXT files.
For the latest of these 5.0-current snapshots, you should always see:
ftp://current.FreeBSD.org/pub/FreeBSD
If you wish to get the latest post-4.x-RELEASE technology.
Table of contents:
------------------
1. What's new since the 4.0/5.0 branch
1.1 KERNEL CHANGES
1.2 SECURITY FIXES
1.3 USERLAND CHANGES
2. Supported Configurations
2.1 Disk Controllers
2.2 Ethernet cards
2.3 FDDI
2.4 ATM
2.5 Misc
3. Obtaining FreeBSD
3.1 FTP/Mail
3.2 CDROM
4. Upgrading from previous releases of FreeBSD
5. Reporting problems, making suggestions, submitting code
6. Acknowledgments
1. What's new since the 4.0/5.0 branch
--------------------------------------
All changes described here are unique to the 5.0 branch unless
specifically marked as [MERGED] features.
1.1. KERNEL CHANGES
-------------------
A new event notification facility called kqueue was added to the
FreeBSD kernel. This is a new interface which is able to replace
poll/select, offering improved performance, as well as the ability
to report many different types of events. Support for monitoring
changes in sockets, pipes, fifos, and files are present, as well as
for signals and processes. [MERGED]
Support for named extended attributes was added to the FreeBSD kernel.
This allows the kernel, and appropriately privileged userland
processes, to tag files and directories with attribute data. Extended
attributes were added to support the TrustedBSD Project, in particular
ACLs, capability data, and mandatory access control labels (see
/usr/src/sys/ufs/ufs/README.extattr for details).
POSIX.1b Shared Memory Objects are now supported. The implementation
uses regular files, but automatically enables the MAP_NOSYNC flag
when they are mmap(2)ed. [MERGED]
Added support for PCI Ethernet adapters based on the National Semiconductor
DP83815 chipset, including the NetGear FA312-TX.
Due to a licensing change, softupdates have been integrated into the
main portion of the kernel source tree. As a consequence, softupdates
are now available with the GENERIC kernel. [MERGED]
ipfilter has been updated to 3.4.16. [MERGED]
The tap driver, a virtual Ethernet device driver for bridged
configurations, has been added. [MERGED]
accept_filters, a kernel feature to reduce overheads when accepting
and reading new connections on listening sockets, has been added.
[MERGED]
The ata(4) driver now has support for ATA100 controllers. In
addition, it now supports the ServerWorks ROSB4 ATA33 chipset, the CMD
648 ATA66 and CMD 649 ATA100 chipsets, and the Cyrix 5530. [MERGED]
To provide more flexible configuration, the various options for the
ata(4) driver are now boot loader tunables, rather than kernel
configure-time options. [MERGED]
The ata(4) driver now has support for tagged queuing, which is
enabled by the hw.ata.tags loader tunable. [MERGED]
The ata(4) driver now has support for ATA "pseudo" RAID controllers as
the Promise Fasttrak and HighPoint HPT370 controllers. [MERGED]
AlphaServer 1200 ("Tincup") has been tested and works OK. Currently it does
not want to boot from CD or floppy but a transplanted disk that was
installed on another Alpha works well. [MERGED]
The ti(4) driver now supports the Alteon AceNIC 1000baseT Gigabit
Ethernet and Netgear GA620T 1000baseT Gigabit cards. [MERGED]
SMP support has been largely reworked, incorporating code from BSD/OS
5.0. One of the main features of SMPng ("SMP Next Generation") is to
allow more processes to run in kernel, without the need for spin locks
that can dramatically reduce the efficiency of multiple processors.
Interrupt handlers now have contexts associated with them that allow
them to be blocked, which reduces the need to lock out interrupts.
The kernel and modules have been moved to the directory /boot/kernel,
so they can be easily manipulated together. The boot loader has been
updated to make this change as seamless as possible.
A filesystem snapshot capability has been added to FFS. Details can
be found in /usr/src/sys/ufs/ffs/README.snapshot.
Softupdates for FFS have received some bug fixes and enhancements.
A bug in FFS that could cause superblock corruption on very large
filesystems has been corrected. [MERGED]
The ng_mppc(4) and ng_bridge(4) node types have been added to the
netgraph subsystem. The ng_ether(4) node is now dynamically loadable.
Miscellaneous bug fixes and enhancements have also been made. [MERGED]
The pcn(4) driver, which supports the AMD PCnet/FAST, PCnet/FAST+,
PCnet/FAST III, PCnet/PRO, PCnet/Home, and HomePNA adapters, has been added.
Although these cards are already supported by the lnc(4) driver, the pcn
driver runs these chips in 32-bit mode and uses the RX alignment feature to
achieve zero-copy receive. This driver is also machine-independent,
so it will work on both the i386 and alpha platforms. The lnc driver
is still needed to support non-PCI cards. [MERGED]
The ed(4) driver is now also supported on the Alpha.
A bug in the ed(4) driver that could cause panics with very short
packets and BPF or bridging active has been fixed.
The pcm(4) driver now supports the ESS Solo 1, Maestro-1, Maestro-2,
and Maestro-2e; Forte Media fm801, ESS Maestro-2e, and VIA
Technologies VT82C686A sound card/chipsets, and has received some
other updates. [MERGED] Separate drivers for the SoundBlaster 8 and
Soundblaster 16 now replace an older, unified driver. [MERGED] A
driver for the CMedia CMI8338/CMI8738 sound chips has been added. A
driver for the CS4281 sound chip has been added. [MERGED]
A driver for the ESS Maestro-3/Allegro has been added, however due to
licensing restrictions, it cannot be compiled into the kernel.
[MERGED] To use this driver, add the following line to
/boot/loader.conf:
maestro3_load="YES"
Replace the PQ_*CACHE options with a single PQ_CACHESIZE option to be
set to the cache size in kilobytes. The old options are still
supported for backwards compatibility. [MERGED]
The ahc(4) driver has been updated. Among various improvements are
improved compatibility with chips in "RAID Port" mode and systems with
AAA and ARO cards installed, as well as performance improvements.
Some bugs were also fixed, including a rare hang on Ultra2/U160
controllers. [MERGED]
ACPI support has been merged in from the FreeBSD-ACPI project.
devfs(5), which allows entries in the /dev directory to be built
automatically and supports more flexible attachment of devices, has
been largely reworked. devfs(5) is configured into the GENERIC
kernel.
Write combining for crashdumps has been implemented. This feature
is useful when write caching is disabled on both SCSI and IDE disks,
where large memory dumps could take up to an hour to complete. [MERGED]
The bktr(4) driver has been updated to 2.15. New tuner types have
been added, and improvements to the KLD module and to memory
allocation have been made. [MERGED]
The bktr(4) driver has been updated to 2.17. This fixes bugs in devfs
when unloading and reloading, and syncs with some NetBSD
changes. [MERGED]
The bktr(4) driver has been updated to 2.18. This adds support for
new Hauppauge Model 44xxx WinTV Cards (the ones with no audio mux).
Extremely large swap areas (>67 GB) no longer panic the system.
The Inode Filesystem (IFS) has been added; more information can be
found in /usr/src/sys/ufs/ifs/README.
The cd(4) driver now has support for write operations. This allows
writing to DVD-RAM, PD and similar drives that probe as CD devices.
Note that change affects only random-access writeable devices, not
sequential-only writeable devices such as CD-R drives, which are
supported by cdrecord. [MERGED]
The ISO-9660 filesystem now has a hook that supports a loadable
character conversion routine. The sysutils/cd9660_unicode port
contains a set of common conversions. [MERGED]
Support for threads under Linux emulation has been added.
The an(4) driver for Cisco Aironet cards now supports Wired Equivalent
Privacy (WEP) encryption, settable via ancontrol(8). [MERGED]
A new netgraph node type ng_one2many(4) for multiplexing and
demultiplexing packets over multiple links has been added. [MERGED]
The DEC3000-series support has been removed from the mfsroot floppy image
so that it fits on a 1.44Mbyte floppy again. As DEC3000 is currently
only usable diskless this should not cause any problems.
For the same reason SLIP has been removed from the mfsroot image as well.
Support for AlphaServer 2100A ('Lynx') has been added.
netgraph(4) has received some updates.
sbufs, null-terminated string data structures, and their associated
support routines, have been added to the kernel. Details are in
sbuf(9).
The vinum(4) volume manager has received some bug fixes and enhancements.
ICMP ECHO and TSTAMP replies are now rate limited. TCP RSTs generated
due to packets sent to open and unopen ports are now limited by
separate counters. Each rate limiting queue now has its own
description.
ICMP UNREACH_FILTER_PROHIB messages can now RST TCP connections in the
SYN_SENT state if the correct sequence numbers are sent back, as
controlled by the net.inet.tcp.icmp_may_rst sysctl. [MERGED]
TCP has received some bug fixes for its delayed ACK behavior. [MERGED]
TCP now supports the NewReno modification to the TCP Fast Recovery
algorithm. This behavior can be controlled via the
net.inet.tcp.newreno sysctl variable. [MERGED]
TCP now uses a more aggressive timeout for initial SYN segments; this
allows initial connection attempts to be dropped much faster. [MERGED]
A new sysctl net.inet.ip.check_interface, which is on by default,
causes IP to verify that an incoming packet arrives on an interface
that has an address matching the packet's destination address. [MERGED]
PECOFF (WIN32 Execution file format) support has been added.
kernfs(5) is obsolete and has been retired.
md(4), the memory disk device, has had the functionality of vn(4)
incorporated into it. md(4) devices can now be configured by
mdconfig(8). vn(4) has been removed.
The ray(4) driver, which supports the Webgear Aviator wireless network
cards, has been committed. The operation of ray(4) interfaces can be
modified by raycontrol(8). [MERGED]
FDDI networking using Digital Equipment DEFPA PCI FDDI adapters is now
supported.
A new API has been added for sound cards with hardware volume
control.
A new sysctl 'net.link.ether.inet.log_arp_wrong_iface' to controls the
suppression of logging when ARP replies arrive on the wrong
interface. [MERGED]
A bug in the NFS client that caused bogus access times with
O_EXCL|O_CREAT opens was fixed. [MERGED]
The bug that made certain CDROM drives fail to attach when connected
to a SCSI card driven by 'isp' has been fixed. [MERGED]
Condition variables have now been implemented in the FreeBSD kernel.
See condvar(9) for more details.
The "make buildkernel" target now gets the name of the
configuration(s) to build from the KERNCONF variable, not KERNEL. It
is no longer required, in some cases, for a "buildworld" to precede a
"buildkernel". (The buildworld is still required when upgrading across
major releases, across binutil upgrades and when config changes
version.)
The API UP1100 mainboard has been verified to work OK.
bridge(4) and dummynet(4) have received some enhancements and bug fixes.
The API CS20 1U high server has been verified to work OK.
ipfw(8) has a new feature ("me") that allows for packet matching on
interfaces with dynamically-changing IP addresses. [MERGED]
The isp(4) driver has been updated. [MERGED]
The isp(4) driver now supports target mode for Qlogic SCSI cards,
including Ultra2 and Ultra3 and dual bus cards.
The ida disk driver now has crashdump support. [MERGED]
The random(4) device has been rewritten to use the Yarrow algorithm.
It harvests entropy from a variety of interrupt sources, including the
console devices, Ethernet and point-to-point network interfaces, and
mass-storage devices. Entropy from the random(4) device is now
periodically saved to files in /var/db/entropy.
Kernel code has been added that allows older generation Alpha CPUs
(EV4 and EV5) to emulate instructions of the newer Alpha CPU
generations. This enables the use of binary-only programs like Adobe
Acrobat 4 on EV4 and EV5.
The fxp(4) driver now requires a "device miibus" entry in the kernel
configuration file.
A new NFS hash function (based on the Fowler/Noll/Vo hash algorithm)
has been implemented to improve NFS performance by increasing the
efficiency of the nfsnode hash tables. [MERGED]
The syscons(4) driver now supports keyboard-controlled pasting, by
default bound to Shift-Insert.
Support for file system Access Control Lists (ACLs) has been
introduced, allowing more fine-grained control of discretionary access
control on files and directories. This support was integrated from
the TrustedBSD Project. More details can be found in
/usr/src/sys/ufs/ufs/README.acls.
The CAM error recovery code has been updated.
The directory layout preference algorithm for FFS has been changed to
improve its speed on large filesystems.
The wx(4) driver now supports the Intel PRO1000-F and PRO1000-T
(10/100/1000) adapters.
1.2. SECURITY FIXES
-------------------
sysinstall(8) now allows the user to select one of three "security
profiles" at install-time. These profiles enable different levels of
system security by enabling or disabling various system services in
rc.conf(5) on new installs. [MERGED]
A bug in which malformed ELF executable images can hang the system has
been fixed (see security advisory FreeBSD-SA-00:41). [MERGED]
A security hole in Linux emulation was fixed (see security advisory
FreeBSD-SA-00:42). [MERGED]
rlogind(8), rshd(8), and fingerd(8) are now disabled by default in
/etc/inetd.conf. This only affects new installations. [MERGED]
String-handling library calls in many programs were fixed to reduce
the possibility of buffer overflow-related exploits. [MERGED]
TCP now uses stronger randomness in choosing its initial sequence
numbers (see security advisory FreeBSD-SA-00:52). [MERGED]
Several buffer overflows in tcpdump(1) were corrected (see security
advisory FreeBSD-SA-00:61). [MERGED]
A security hole in top(1) was corrected (see security advisory
FreeBSD-SA-00:62). [MERGED]
A potential security hole caused by an off-by-one-error in
gethostbyname(3) has been fixed (see security advisory
FreeBSD-SA-00:63). [MERGED]
A potential buffer overflow in the ncurses(3X) library, which could
cause arbitrary code to be run from within systat(1), has been corrected
(see security advisory FreeBSD-SA-00:68). [MERGED]
A vulnerability in telnetd(8) that could cause it to consume large
amounts of server resources has been fixed (see security advisory
FreeBSD-SA-00:69). [MERGED]
The "nat deny_incoming" command in ppp(8) now works correctly (see
security advisory FreeBSD-SA-00:70). [MERGED]
A vulnerability in csh(1)/tcsh(1) temporary files that could allow
overwriting of arbitrary user-writable files has been closed (see
security advisory FreeBSD-SA-00:76). [MERGED]
The ssh(1) binary is no longer SUID root by default.
Some fixes were applied to the Kerberos IV implementation related to
environment variables, a possible buffer overrun, and overwriting
ticket files. [MERGED]
telnet(1) now does a better job of sanitizing its environment. [MERGED]
Several vulnerabilities in procfs(4) were fixed (see security advisory
FreeBSD-SA-00:77). [MERGED]
A bug in OpenSSH in which a server was unable to disable ssh-agent or
X11 forwarding was fixed (see security advisory FreeBSD-SA-01:01).
[MERGED]
A bug in ipfw(8) and ipfw6(8) in which inbound TCP segments could
incorrectly be treated as being part of an "established" connection
has been fixed (see security advisory FreeBSD-SA-01:08). [MERGED]
A bug in crontab(8) that could allow users to read any file on the
system in valid crontab(5) syntax has been fixed (see security
advisory FreeBSD-SA-01:09). [MERGED]
A vulnerability in inetd(8) that could allow read-access to the
initial 16 bytes of wheel-accessible files has been fixed (see
security advisory FreeBSD-SA-01:11). [MERGED]
A bug in periodic(8) that used insecure temporary files has been
corrected (see security advisory FreeBSD-SA-01:12). [MERGED]
A bug in sort(1) in which an attacker might be able to cause it to
abort processing has been fixed (see security advisory
FreeBSD-SA-01:13). [MERGED]
To fix a remotely-exploitable buffer overflow, BIND has been updated
to 8.2.3 (see security advisory FreeBSD-SA-01:18). [MERGED]
OpenSSH now has code to prevent (instead of just mitigating through
connection limits) an attack that can lead to guessing the server key
(not host key) by regenerating the server key when an RSA failure is
detected (see security advisory FreeBSD-SA-01:24). [MERGED]
A number of programs have had output formatting strings corrected so
as to reduce the risk of vulnerabilities. [MERGED]
A number of programs that use temporary files now do so more
securely. [MERGED]
A bug in ICMP that could cause an attacker to disrupt TCP and UDP
"sessions" has been corrected. [MERGED]
A bug in timed(8), which caused it to crash if send certain malformed
packets, has been corrected (see security advisory
FreeBSD-SA-01:28). [MERGED]
A bug in rwhod(8), which caused it to crash if send certain malformed
packets, has been corrected (see security advisory
FreeBSD-SA-01:29). [MERGED]
To prevent some forms of DOS attacks, glob(3) allows specification of
a limit on the number of pathname matches it will return. ftpd(8) now
uses this feature. [MERGED]
A security hole in FreeBSD's FFS and EXT2FS implementations, which
allowed a race condition that could cause users to have unauthorized
access to data, has been fixed (see security advisory
FreeBSD-SA-01:30). [MERGED]
A remotely-exploitable vulnerability in ntpd(8) has been closed (see
security advisory FreeBSD-SA-01:31). [MERGED]
A security hole in IPFilter's fragment cache has been closed. [MERGED]
1.3. USERLAND CHANGES
---------------------
cdcontrol(1) now supports a "cdid" command, which calculates and
displays the CD serial number, using the same algorithm used by the CDDB
database. [MERGED]
mtree(8) now includes support for a file listing pathnames to be excluded
when creating and verifying prototypes. This makes it easier to use
mtree as a part of an intrusion-detection system. [MERGED]
OpenSSL has been upgraded to 0.9.6. [MERGED]
OpenSSL now has support for machine-dependent ASM optimizations,
activated by the new MACHINE_CPU Makefile variable. [MERGED]
The OPIE one-time-password suite has been updated to 2.32. [MERGED]
OpenSSH has been upgraded to 2.1.0, which provides support for the
SSH2 protocol, including DSA keys. Therefore, OpenSSH users in the US
no longer need to rely on the restrictively-licensed RSAREF toolkit
which is required to handle RSA keys. OpenSSH 2.1 interoperates well
with other SSH2 clients and servers, including the ssh2 port. See
http://www.openssh.com for more details. [MERGED]
OpenSSH can now authenticate using OPIE passwords in SSH1 mode.
Support is not yet available in SSH2 mode. [MERGED]
OpenSSH has been upgraded to 2.2.0. ssh-add(1) and ssh-agent(1) can now
handle DSA keys. An sftp server interoperable with ssh.com clients
and others has been added. scp(1) can now handle files >2GB.
Interoperability with other ssh2 clients/servers has been improved. A
new feature to limit the number of outstanding unauthenticated ssh
connections in sshd has been added. [MERGED]
OpenSSH has been upgraded to 2.3.0. This version adds support for the
Rijndael encryption algorithm. [MERGED]
PAM support for OpenSSH has been added.
A long-standing bug in SSH, which sometimes resulted in a dropped
session when an X11-forwarded client was closed, was fixed.
Kerberos compatability has been added to OpenSSH. [MERGED]
OpenSSH has been modified to be more resistant to traffic analysis by
requiring that "non-echoed" characters are still echoed back in a null
packet, as well as by padding passwords sent so as not to hint at
password lengths. [MERGED]
Support for USB devices was added to the GENERIC kernel and to the
installation programs to support USB devices out of the box. Note that
SRM does not support USB devices at the moment, so you must still use
an AT keyboard if you are not using a serial console. [MERGED]
The csh(1) shell has been replaced by tcsh(1), although it can still
be run as csh(1). tcsh has been updated to version 6.10. [MERGED]
The more(1) command has been replaced by less(1), although it can still
be run as more(1). [MERGED]
ls(1) can produce colorized listings with the -G flag (and appropriate
terminal support). [MERGED]
sendmail upgraded from version 8.9.3 to version 8.11.3. Important changes
include: new default file locations (see
/usr/src/contrib/sendmail/cf/README); newaliases is limited to root and
trusted users; STARTTLS encryption; and the MSA port (587) is turned on by
default. See /usr/src/contrib/sendmail/RELEASE_NOTES for more
information. [MERGED]
mail.local(8) is no longer installed as a set-user-id binary. If you are
using a /etc/mail/sendmail.cf from the default sendmail.cf included with
FreeBSD any time after 3.1.0, you are fine. If you are using a
hand-configured sendmail.cf and mail.local for delivery, check to make sure
the F=S flag is set on the Mlocal line. Those with .mc files who need to
add the flag can do so by adding the following line to their your .mc file
and regenerating the sendmail.cf file:
MODIFY_MAILER_FLAGS(`LOCAL', `+S')dnl
Note that FEATURE(`local_lmtp') already does this. [MERGED]
The default /etc/mail/sendmail.cf disables the SMTP EXPN and VRFY
commands. [MERGED]
vacation(1) has been updated to use the version included with
sendmail. [MERGED]
The sendmail(8) configuration building tools are installed in
/usr/share/sendmail/cf/. [MERGED]
New make.conf options: SENDMAIL_MC and SENDMAIL_ADDITIONAL_MC. See
/etc/defaults/make.conf for more information. [MERGED]
The Makefile in /etc/mail now supports: the new SENDMAIL_MC make.conf
option; the ability to build .cf files from .mc files; generalized map
rebuilding; rebuilding the aliases file; and the ability to stop, start,
and restart sendmail. [MERGED]
sysinstall(8) now properly preserves /etc/mail during a binary
upgrade. [MERGED]
awk has been upgraded from gawk-3.0.4 to gawk-3.0.6. This fixes a number
of non-critical bugs and includes a few performance tweaks. [MERGED]
routed(8) has been updated to version 2.22. [MERGED]
The truncate(1) utility, which truncates or extends the length
of files, has been added. [MERGED]
syslogd(8) can take a -n option to disable DNS queries for every
request. [MERGED]
kenv(1), a command to dump the kernel environment, has been added.
[MERGED]
The behavior of periodic(8) is now controlled by /etc/defaults/periodic.conf
and /etc/periodic.conf. [MERGED]
logger(1) can now send messages directly to a remote syslog. [MERGED]
which(1) is now a C program, rather than a Perl script.
killall(1) is now a C program, rather than a Perl script. As a
result, killall's -m option now uses the regular expression syntax of
regex(3), rather than that of perl(1). [MERGED]
killall(1) now allows non-root users to kill SUID root processes that
they started.
finger(1) now has the ability to support fingering aliases, via the
finger.conf(5) file. [MERGED]
finger(1) now has support for a .pubkey file.
nsswitch support has been merged from NetBSD. By creating an
nsswitch.conf(5) file, FreeBSD can be configured so that various
databases such as passwd(5) and group(5) can be looked up using flat
files, NIS, or Hesiod. The old hosts.conf(5) file is no longer used.
sshd X11Forwarding is now turned on by default on server (any risk is
to the client, where it is already disabled by default).
RSA Security has waived all patent rights to the RSA algorithm (two
weeks before the patent was due to expire). As a result, the native
OpenSSL implementation of the RSA algorithm is now activated by
default, and the rsaref port and librsaUSA are no longer
required for USA residents. [MERGED]
sshd is now enabled by default on new installs. [MERGED]
perl has been updated to version 5.6.0.
Binutils have been upgraded to 2.10.1. [MERGED]
libreadline has been upgraded to 4.2.
The ifconfig(8) command can set the link-layer address of an interface.
[MERGED]
setproctitle(3) has been moved from libutil to libc. [MERGED]
chio(1) now has the ability to specify elements by volume tag instead
of by their physical location as well as the ability to return an
element to its previous location. [MERGED]
sed(1) now takes a -E option for extended regular expression
support. [MERGED]
ln(1) now takes an -i option to request user confirmation before
overwriting an existing file. [MERGED]
Version numbers of installed packages have a new (backward-compatible)
syntax, which supports the "PORTREVISION" and "PORTEPOCH" variables in
ports collection makefiles. These changes help keep track of changes
in the ports collection entries such as security patches or
FreeBSD-specific updates, which aren't reflected in the original,
third-party software distributions. pkg_version(1) can now compare
these new-style version numbers. [MERGED]
CVS has been updated to 1.11. [MERGED]
libpcap has been updated to 0.6.2.
tcpdump has been updated to 3.6.2.
User-land ppp(8) has received a number of updates and bug fixes. [MERGED]
To improve performance and disk utilization, the "ports skeletons" in
the FreeBSD Ports Collection have been restructured. Installed ports
and packages should not be affected. [MERGED]
make(1) has gained the :C/// (regexp substitution), :L (lowercase),
and :U (uppercase) variable modifiers. These were added to reduce the
differences between the FreeBSD and OpenBSD/NetBSD make programs. [MERGED]
Bugs in make(1), among which include broken null suffix behavior, bad
assumptions about current directory permissions, and potential buffer
overflows, have been fixed. [MERGED]
fsck wrappers have been imported; this feature provides infrastructure
for fsck(8) to work on different types of filesystems (analogous to
mount(8) and mount_*(8)).
The behavior of fsck(8) when dealing with various passes (a la
/etc/fstab) has been modified to accomodate multiple-disk filesystems.
ncurses has been updated to ncurses-5.1-20001009. [MERGED]
gperf has been updated to 2.7.2. [MERGED]
style.perl.7, a style guide for Perl code in the FreeBSD base system,
has been added.
The ISC library from the BIND distribution is now built as
libisc. [MERGED]
The "in use" percentage metric displayed by netstat(1) now really
reflects the percentage of network mbufs used. [MERGED]
netstat(1) now has a -W flag that tells it not to truncate addresses,
even if they're too long for the column they're printed in. [MERGED]
netstat(1) now keeps track of input and output packets on a
per-address basis for each interface. [MERGED]
sockstat(1) now has -c and -l flags for listing connected and
listening sockets, respectively. [MERGED]
mergemaster(8) has gained some new features, has been cleaned up
somewhat, and is now more cross-platform friendly.
mergemaster(8) now sources an /etc/mergemaster.rc file and also
prompts the user to run recommended commands (such as "newaliases") as
needed. [MERGED]
The compiler chain now uses the FSF-supplied C/C++ runtime
initialization code. This change brings about better compatibility
with code generated from the various egcs and gcc ports, as well as
the stock public FSF source. [MERGED]
The threads library has gained some signal handling changes, bug
fixes, and performance enhancements (including zero system call thread
switching). gdb(1) thread support has been updated to match these
changes. [MERGED]
chflags(1) has moved from /usr/bin to /bin.
Use of the CSMG_* macros no longer require inclusion of <sys/param.h>.
IP Filter is now supported by the rc.conf(5) boot-time configuration
and initialization. [MERGED]
The lastlogin(1) utility, which prints the last login time of each
user, has been imported from NetBSD. [MERGED]
newfs(8) now implements write combining, which can make creation of
new filesystems up to seven times faster. [MERGED]
newfs(8) now takes a -U option to enable softupdates on a new filesystem.
The default number of cylinders per group in newfs(8) is now 22, up from 16.
A number of buffer overflows in config(8) have been fixed. [MERGED]
pwd(1) can now double as realpath(1), a program to resolve pathnames
to their underlying physical paths. [MERGED]
file(1) has been contribify-ed, and updated to version 3.34.
stty(1) now has support for an "erase2" control character, so that
both "delete" and "backspace" can be used to erase characters. [MERGED]
The ibcs2(8), linux(8), osf1(8), and svr4(8) scripts, whose sole
purpose was to load emulation kernel modules, have been removed. The
kernel module system will automatically load them as needed to fulfill
dependencies.
top(1) will now use the full width of its tty.
groff(1) and its related utilities have been updated to FSF version
1.16.1. [MERGED]
A number of cleanups and enhancements have been applied to the PCI
subsystem. /usr/share/misc/pci_vendors now contains a vendor/device
database, which can be used by pciconf(8).
indent(1) has gained some new formatting options. [MERGED]
sysinstall now uses some more intuitive defaults thanks to some new
dialog support functions. [MERGED]
The default root partition in sysinstall is now 100MB on the i386 and
120MB on the alpha.
gcc has been updated to 2.95.3. [MERGED]
Shortly after the receipt of a SIGINFO signal (normally control-T from
the controlling tty), fsck_ffs will now output a line indicating the
current phase number and progress information relevant to the current
phase. [MERGED]
fsck_ffs now supports background filesystem checks to mounted FFS
filesystems with the -B option (softupdates must be enabled on these
filesystems).
Catching up with most other network utilities in the base system,
lpr(1), lpd(8), syslogd(8), and logger(1) are now all IPv6-capable.
[MERGED]
rm(1) -v now displays the entire pathname of a file being
removed. [MERGED]
lpr(1), lpq(1), and lpd(8) have received a few minor
enhancements. [MERGED]
pkg_update(1), a utility to update installed packages and update their
dependencies, has been added. [MERGED]
pkg_info(1) now supports globbing against names of installed packages.
The -G option disables this behavior, and the -x option causes regular
expression matching instead of shell globbing. [MERGED]
If the first argument fo ancontrol(8) or wicontrol(8) doesn't start
with a "-", it is assumed to be an interface.
rdist(1) has been retired.
Kerberos IV has been updated to 1.0.5. [MERGED]
Heimdal has been updated to 0.3e. [MERGED]
ppp(8) has gained the tcpmssfixup option, which adjusts outgoing TCP
SYN packets so that the maximum receive segment size is no larger than
allowed by the interface MTU.
libcrypt and libdescrypt have been unified to provide a configurable
password authentication hash library. Both the md5 and des hash methods
are provided unless the des hash is specifically compiled out.
passwd(1) and pw(8) now select the passwd hash algorithm at run time. See
the "passwd_format" attribute in /etc/login.conf.
In preparation for meeting SUSv2/POSIX <sys/select.h> requirements,
'struct selinfo' and related functions have been moved to
<sys/selinfo.h>.
gcc now uses a unified libgcc rather than a separate one for threaded
and non-threaded programs. /usr/lib/libgcc_r.a can be removed. [MERGED]
syslogd(8) now supports a "LOG_CONSOLE" facility (disabled by
default), which can be used to log /dev/console output. [MERGED]
rpcgen now uses /usr/bin/cpp (as on NetBSD), not /usr/libexec/cpp.
Boot-time syscons configuration was moved to a machine-independent
rc.syscons. [MERGED]
burncd(8) now supports a -m option for multisession mode (the default
behavior now is to close disks as single-session). A -l option to
take a list of image files from a filename was also added; '-' can be
used as a filename for stdin. [MERGED]
dmesg(8) now has a -a option to show the entire message buffer,
including syslog records and /dev/console output. [MERGED]
In /etc/ssh/sshd_config, the ConnectionsPerPeriod parameter has been
deprecated in favor of MaxStartups. [MERGED]
cdcontrol(1) now uses the CDROM environment variable to pick a default
device. [MERGED]
sysctl(8) now supports a -N option to print out variable names only.
All packages and ports now contain an "origin" directive, which makes
it easier for programs like pkg_version(1) to determine the directory
from which a package was built. [MERGED]
sysinstall(8) now lives in /usr/sbin, which simplifies the installation
process. The sysinstall(8) manpage is also installed in a more
consistent fashion now.
config(8) is now better about converting various warnings that should
have been errors into actual fatal errors with an exit code. This
ensures that that 'make buildkernel' doesn't quietly ignore them and
build a bogus kernel without a human to read the errors. [MERGED]
pkg_create(1) and pkg_add(1) can now work with packages that have
been compressed using bzip2(1). pkg_add(1) will use the
PACKAGEROOT environment variable to determine a mirror site for new
packages. [MERGED]
pkg_info(1) can now accept a -g flag for verifying an installed
package against its recorded checksums (to see if it's been modified
post-installation). Naturally, this mechanism is only as secure as
the contents of /var/db/pkg if it's to be used for auditing
purposes. [MERGED]
pkg_version(1) now has a version number comparison routine that
corresponds to the Porters Handbook. It also has a -t option for
testing address comparisons. [MERGED]
libc is now thread-safe by default; libc_r contains only thread functions.
find(1) now takes the -empty flag, which returns true if a file or
directory is empty. [MERGED]
find(1) now takes the -iname and -ipath primaries for case-insensitive
matches, and the -regexp and -iregexp primaries for regular-expression
matches. The -E flag now enables extended regular
expressions. [MERGED]
tftpd(8) now takes the -c and -C options, which allow the server to
chroot(2) based on the IP address of the connecting client. tftp(1)
and tftpd(8) can now transfer files larger than 65535 blocks. [MERGED]
vidcontrol(1) now accepts a -g parameter to select custom text
geometry in the VESA_800x600 raster text mode. [MERGED]
ldconfig(8) now checks directory ownerships and permissions for
greater security; these checks can be disabled with the -i
flag. [MERGED]
The rfork_thread(3) library call has been added as a helper function
to rfork(2). Using this function should avoid the need to implement
complex stack swap code. [MERGED]
Significant additions have been made to internationalization support;
FreeBSD now has complete locale support for the LC_MONETARY,
LC_NUMERIC, and LC_MESSAGES categories. A number of applications have
been updated to take advantage of this support.
A compat4x distribution has been added for compatibility with FreeBSD
4-STABLE.
The compat3x distribution has been updated to include libraries
present in FreeBSD 3.5.1-RELEASE. [MERGED]
savecore(8) now supports a -k option to prevent clearing a crash dump
after saving it. It also attempts to avoid writing large stretches of
zeros to crash dump files to save space and time. [MERGED]
When requested to delete multiple packages, pkg_delete(1) will now
attempt to remove them in dependency order rather than the order
specified on the command line. [MERGED]
pkg_delete(1) now can perform glob/regexp matching of package names.
In addition, it supports the -a option for removing all packages and
the -i option for rm(1)-style interactive confirmation. [MERGED]
tar(1) now supports the TAR_RSH variable, principally to enable the
use of ssh(1) as a transport. [MERGED]
disklabel(8) now supports partition sizes expressed in kilobytes,
megabytes, or gigabytes, in addition to sectors. [MERGED]
The pseudo-random number generator implemented by rand(3) has been
improved to provide less biased results.
login(1) now exports environment variables set by PAM
modules. [MERGED]
PAM support has been added for account management and sessions.
wall(1) now supports a -g flag to write a message to all users of a
given group.
The new CPUTYPE make.conf variable controls the compilation of
processor-specific optimizations in various pieces of code such as
OpenSSL. [MERGED]
The default value for the CVS_RSH variable (used by cvs(1)) is now
ssh, rather than rsh. [MERGED]
bc has been updated from 1.04 to 1.06. [MERGED]
ipfstat(8) now supports the -t option to turn on a top(1)-like
display. [MERGED]
The dreaded 'going nowhere without my init' bug that manifested itself
while installing on hardware that had labeled disks connected (e.g.
with Tru64 on it) has been fixed. [MERGED]
pkg_sign(1) and pkg_check(1) have been added to digitally sign and
verify the signatures on binary package files. [MERGED]
/usr/src/share/examples/BSD_daemon/ now contains a scalable Beastie
graphic. [MERGED]
dump(8) now supports inheritance of the "nodump" flag down a
hierarchy. [MERGED]
The ISC DHCP client has been updated to 2.0pl5. [MERGED]
split(1) now has the ability to split a file longer than 2GB. [MERGED]
tail(1) now has the ability to work on files longer than 2GB.
units(1) has received some updates and bugfixes. [MERGED]
As part of an ongoing process, many manual pages were improved, both
in terms of their formatting markup and in their content. [MERGED]
pkg_create(1) now records dependencies in dependency order rather than
in the order specified on the command line. This improves the
functioning of "pkg_add -r". [MERGED]
"lprm -" now works for remote printer queues. [MERGED]
ftpd(8) now supports a -r flag for read-only mode and a -E flag to
disable EPSV. It also has some fixes to reduce information leakage
and the ability to specify compile-time port ranges. [MERGED]
ping(8) now supports a -m option to set the TTL of outgoing packets.
A version of Transport Independent RPC (TI-RPC) has been imported.
rpcbind(8) has replaced portmap(8).
NFS now works over IPv6.
lockd has been imported from NetBSD.
rc(8) now has an framework for handling dependencies between
rc.conf(5) variables. [MERGED]
The setfacl(1) and getfacl(1) commands have been added to manage
file system Access Control Lists.
ee(1) editor has been updated to 1.4.2.
The default TCP port range used by libfetch for passive FTP retrievals
has changed; this affects the behavior of fetch(1), which has gained the
-U option to restore the old behavior. [MERGED]
atacontrol(8) has been added to control various aspects of the ata(4)
driver.
libcrypt now has support for Blowfish password hashing.
The functions from libposix1e have been integrated into libc.
GNATS has been updated to 3.113. [MERGED]
BSDPAN, a collection of modules that provides tighter integration of
Perl into the FreeBSD Ports Collection, has been added.
vidcontrol(1) now allows the user to omit the font size specification
when loading a font, and has some better error-handling.
2. Supported Configurations
---------------------------
For an extensive overview of supported Alpha machines/mainboards please refer
to the HARDWARE.TXT file.
2.1. Disk Controllers
---------------------
IDE
ATA
Adaptec 1535 ISA SCSI controllers
Adaptec 154x series ISA SCSI controllers
Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
AdvanSys SCSI controllers (all models).
BusLogic MultiMaster controllers:
[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
BusLogic MultiMaster "W" Series Host Adapters:
BT-948, BT-958, BT-958D
BusLogic MultiMaster "C" Series Host Adapters:
BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
BT-540CF
BusLogic MultiMaster "S" Series Host Adapters:
BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
BT-542B
BusLogic MultiMaster "A" Series Host Adapters:
BT-742A, BT-542B
AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
supported.
DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
SmartRAID IV SCSI/RAID controllers are supported. The DPT SmartRAID/CACHE V
is not yet supported.
AMI MegaRAID Express and Enterprise family RAID controllers:
MegaRAID Series 418
MegaRAID Enterprise 1200 (Series 428)
MegaRAID Enterprise 1300 (Series 434)
MegaRAID Enterprise 1400 (Series 438)
MegaRAID Enterprise 1500 (Series 467)
MegaRAID Enterprise 1600 (Series 471)
MegaRAID Elite 1500 (Series 467)
MegaRAID Elite 1600 (Series 493)
MegaRAID Express 100 (Series 466WS)
MegaRAID Express 200 (Series 466)
MegaRAID Express 300 (Series 490)
MegaRAID Express 500 (Series 475)
Dell PERC
Dell PERC 2/SC
Dell PERC 2/DC
Dell PERC 3/DCL
HP NetRAID-1si
HP NetRAID-3si
HP Embedded NetRAID
Booting from these controllers is supported, but not possible due to
SRM limitations.
Mylex DAC960 and DAC1100 RAID controllers with 2.x, 3.x, 4.x and 5.x
firmware:
DAC960P
DAC960PD
DAC960PDU
DAC960PL
DAC960PJ
DAC960PG
AcceleRAID 150
AcceleRAID 250
eXtremeRAID 1100
This list includes controllers sold by Digital/Compaq in Alpha systems
in the StorageWorks family, eg. KZPSC, KZPAC. Booting from these
controllers is supported when recognised by SRM (typically Digital/
Compaq models only, and only in systems where they are supported).
EISA adapters are not supported.
SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
ASUS SC-200
Data Technology DTC3130 (all variants)
Diamond FirePort (all)
NCR cards (all)
Symbios cards (all)
Tekram DC390W, 390U and 390F
Tyan S1365
Qlogic Controllers and variants:
Qlogic 1020, 1040 SCSI and Ultra SCSI host adapters
Qlogic 1240 dual Ultra SCSI controllers
Qlogic 1080 Ultra2 LVD and 1280 Dual Ultra2 LVD controllers
Qlogic 12160 Ultra3 LVD controllers
Qlogic 2100 and Qlogic 2200 Fibre Channel SCSI controllers
Performance Technology SBS440 ISP1000 variants
Performance Technology SBS450 ISP1040 variants
Performance Technology SBS470 ISP2100 variants
Antares Microsystems P-0033 ISP2100 variants
With all supported SCSI controllers, full support is provided for
SCSI-I & SCSI-II peripherals, including hard disks, optical disks,
tape drives (including DAT and 8mm Exabyte), medium changers, processor
target devices and CDROM drives. WORM devices that support CDROM commands
are supported for read-only access by the CDROM driver. WORM/CD-R/CD-RW
writing support is provided by cdrecord, which is in the ports tree.
The following CD-ROM type systems are supported at this time:
(cd) SCSI interface
(acd) ATAPI IDE interface
2.2. Ethernet cards
-------------------
Adaptec Duralink PCI Fast Ethernet adapters based on the Adaptec
AIC-6915 Fast Ethernet controller chip, including the following:
ANA-62011 64-bit single port 10/100baseTX adapter
ANA-62022 64-bit dual port 10/100baseTX adapter
ANA-62044 64-bit quad port 10/100baseTX adapter
ANA-69011 32-bit single port 10/100baseTX adapter
ANA-62020 64-bit single port 100baseFX adapter
Allied-Telesis AT1700 and RE2000 cards
Alteon Networks PCI Gigabit Ethernet NICs based on the Tigon 1 and Tigon 2
chipsets, including the following:
Alteon AceNIC (Tigon 1 and 2)
3Com 3c985-SX (Tigon 1 and 2)
Netgear GA620 (Tigon 2)
Silicon Graphics Gigabit Ethernet
DEC/Compaq EtherWORKS 1000
NEC Gigabit Ethernet
Farallon PN9000SX
Asante PCI 1000BASE-SX Gigabit Ethernet Adapter
Asante GigaNIX1000T Gigabit Ethernet Adapter
AMD PCnet/PCI (79c970 & 53c974 or 79c974)
AMD PCnet/FAST, PCnet/FAST+, PCnet/FAST III, PCnet/PRO,
PCnet/Home, and HomePNA.
SMC Elite 16 WD8013 Ethernet interface, and most other WD8003E,
WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT
based clones. SMC Elite Ultra. SMC Etherpower II.
RealTek 8129/8139 Fast Ethernet NICs including the following:
Allied Telesyn AT2550
Allied Telesyn AT2500TX
Genius GF100TXR (RTL8139)
NDC Communications NE100TX-E
OvisLink LEF-8129TX
OvisLink LEF-8139TX
Netronix Inc. EA-1210 NetEther 10/100
KTX-9130TX 10/100 Fast Ethernet
Accton "Cheetah" EN1207D (MPX 5030/5038; RealTek 8139 clone)
SMC EZ Card 10/100 PCI 1211-TX
Lite-On 82c168/82c169 PNIC Fast Ethernet NICs including the following:
LinkSys EtherFast LNE100TX
NetGear FA310-TX Rev. D1
Matrox FastNIC 10/100
Kingston KNE110TX
Macronix 98713, 98713A, 98715, 98715A and 98725 Fast Ethernet NICs
Accton EN1217 (98715A)
Adico AE310TX (98715A)
Compex RL100-TX
CNet Pro120A (98713 or 98713A)
CNet Pro120B (98715)
NDC Communications SFA100A (98713A)
SVEC PN102TX (98713)
Macronix/Lite-On PNIC II LC82C115 Fast Ethernet NICs including the following:
LinkSys EtherFast LNE100TX Version 2
Winbond W89C840F Fast Ethernet NICs including the following:
Trendware TE100-PCIE
VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" Fast Ethernet
NICs including the following:
Hawking Technologies PN102TX
D-Link DFE-530TX
AOpen/Acer ALN-320
Silicon Integrated Systems SiS 900 and SiS 7016 PCI Fast Ethernet NICs
National Semiconductor DP83815 Fast Ethernet NICs including the following:
NetGear FA312-TX
Sundance Technologies ST201 PCI Fast Ethernet NICs including
the following:
D-Link DFE-550TX
SysKonnect SK-984x PCI Gigabit Ethernet cards including the following:
SK-9841 1000baseLX single mode fiber, single port
SK-9842 1000baseSX multimode fiber, single port
SK-9843 1000baseLX single mode fiber, dual port
SK-9844 1000baseSX multimode fiber, dual port
Texas Instruments ThunderLAN PCI NICs, including the following:
Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port
Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP
Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC
Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP
Racore 8165 10/100baseTX
Racore 8148 10baseT/100baseTX/100baseFX multi-personality
ADMtek Inc. AL981-based PCI Fast Ethernet NICs
ADMtek Inc. AN985-based PCI Fast Ethernet NICs
ADMtek Inc. AN986-based USB Ethernet NICs including the following:
LinkSys USB100TX
Billionton USB100
Melco Inc. LUA-TX
D-Link DSB-650TX
SMC 2202USB
CATC USB-EL1210A-based USB Ethernet NICs including the following:
CATC Netmate
CATC Netmate II
Belkin F5U111
Kawasaki LSI KU5KUSB101B-based USB Ethernet NICs including
the following:
LinkSys USB10T
Entrega NET-USB-E45
Peracom USB Ethernet Adapter
3Com 3c19250
ADS Technologies USB-10BT
ATen UC10T
Netgear EA101
D-Link DSB-650
SMC 2102USB
SMC 2104USB
Corega USB-T
ASIX Electronics AX88140A PCI NICs, including the following:
Alfa Inc. GFC2204
CNet Pro110B
DEC EtherWORKS III NICs (DE203, DE204, and DE205)
DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422)
DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc)
DEC/Intel 21143 based Fast Ethernet NICs, including the following:
DEC DE500-BA
Compaq Presario 7900 series built-in Ethernet
D-Link DFE-570TX
Kingston KNE100TX
LinkSys EtherFast 10/100 Instant GigaDrive built-in Ethernet
Davicom DM9100 and DM9102 PCI Fast Ethernet NICs, including the
following:
Jaton Corporation XpressNet
Fujitsu MB86960A/MB86965A
HP PC Lan+ cards (model numbers: 27247B and 27252A).
Intel EtherExpress 16
Intel EtherExpress Pro/10
Intel EtherExpress Pro/100B PCI Fast Ethernet
Isolan AT 4141-0 (16 bit)
Isolink 4110 (8 bit)
Novell NE1000, NE2000, and NE2100 Ethernet interface.
PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000,
Winbond W89C940, Surecom NE-34, VIA VT86C926.
3Com 3C501 cards
3Com 3C503 Etherlink II
3Com 3c505 Etherlink/+
3Com 3C507 Etherlink 16/TP
3Com 3C509, 3C579, 3C590/592/595/900/905/905B/905C PCI
(Fast) Etherlink III / (Fast) Etherlink XL
3Com 3c980/3c980B Fast Etherlink XL server adapter
3Com 3cSOHO100-TX OfficeConnect adapter
Toshiba Ethernet cards
Crystal Semiconductor CS89x0-based NICs, including:
IBM Etherjet ISA
Note that NO token ring cards are supported at this time as we're
still waiting for someone to donate a driver for one of them. Any
takers?
2.3. FDDI
---------
Digital Equipment DEFPA PCI adapters are supported.,
2.4. ATM
--------
o ATM Host Interfaces
- FORE Systems, Inc. PCA-200E ATM PCI Adapters
- Efficient Networks, Inc. ENI-155p ATM PCI Adapters
o ATM Signaling Protocols
- The ATM Forum UNI 3.1 signaling protocol
- The ATM Forum UNI 3.0 signaling protocol
- The ATM Forum ILMI address registration
- FORE Systems' proprietary SPANS signaling protocol
- Permanent Virtual Channels (PVCs)
o IETF "Classical IP and ARP over ATM" model
- RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
- RFC 1577, "Classical IP and ARP over ATM"
- RFC 1626, "Default IP MTU for use over ATM AAL5"
- RFC 1755, "ATM Signaling Support for IP over ATM"
- RFC 2225, "Classical IP and ARP over ATM"
- RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
- Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
"A Distributed ATMARP Service Using SCSP"
o ATM Sockets interface
2.5. Misc
---------
AST 4 port serial card using shared IRQ.
ARNET 8 port serial card using shared IRQ.
ARNET (now Digiboard) Sync 570/i high-speed serial.
Boca BB1004 4-Port serial card (Modems NOT supported)
Boca IOAT66 6-Port serial card (Modems supported)
Boca BB1008 8-Port serial card (Modems NOT supported)
Boca BB2016 16-Port serial card (Modems supported)
Comtrol Rocketport card.
Cyclades Cyclom-y Serial Board.
STB 4 port card using shared IRQ.
SDL Communications Riscom/8 Serial Board.
SDL Communications RISCom/N2 and N2pci high-speed sync serial boards.
Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64,
ONboard 4/16 and Brumby.
Specialix SI/XIO/SX ISA, PCI serial expansion cards/modules.
Advance Asound 100, 110 and Logic ALS120
Crystal Semiconductor CS461x/462x/428x
ENSONIQ AudioPCI ES1370/1371
ESS ES1868, ES1869, ES1879 and ES1888
ESS Maestro-1, Maestro-2, and Maestro-2E
ForteMedia fm801
Gravis UltraSound MAX/PnP
MSS/WSS Compatible DSPs
NeoMagic 256AV/ZX
OPTi 931/82C931
SoundBlaster, Soundblaster Pro, Soundblaster AWE-32, Soundblaster AWE-64
Trident 4DWave DX/NX
VIA Technologies VT82C686A
Yamaha DS1 and DS1e
(newpcm driver)
Connectix QuickCam
Matrox Meteor Video frame grabber
Creative Labs Video Spigot frame grabber
Cortex1 frame grabber
Hauppauge Wincast/TV boards (PCI)
STB TV PCI
Intel Smart Video Recorder III
Various Frame grabbers based on Brooktree Bt848 / Bt878 chip.
HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives.
PS/2 mice
Standard PC Joystick
X-10 power controllers
GPIB and Transputer drivers.
Genius and Mustek hand scanners.
Xilinx XC6200 based reconfigurable hardware cards compatible with
the HOT1 from Virtual Computers (www.vcc.com)
Support for Dave Mills experimental Loran-C receiver.
Lucent Technologies WaveLAN/IEEE 802.11 ISA standard speed
(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes
(NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS). Note: the
ISA versions of these adapters are actually PCMCIA cards combined with
an ISA to PCMCIA bridge card, so both kinds of devices work with
the same driver.
Aironet 4500/4800 series 802.11 wireless adapters. The PCI and ISA
models are supported for the Alpha architecture.
3. Obtaining FreeBSD
--------------------
You may obtain FreeBSD in a variety of ways:
3.1. FTP/Mail
-------------
You can ftp FreeBSD and any or all of its optional packages from
`ftp.FreeBSD.org' - the official FreeBSD release site.
For other locations that mirror the FreeBSD software see the file
MIRROR.SITES. Please ftp the distribution from the site closest (in
networking terms) to you. Additional mirror sites are always welcome!
Contact freebsd-admin@FreeBSD.org for more details if you'd like to
become an official mirror site.
If you do not have access to the Internet and electronic mail is your
only recourse, then you may still fetch the files by sending mail to
`ftpmail@ftpmail.vix.com' - putting the keyword "help" in your message
to get more information on how to fetch files using this mechanism.
Please do note, however, that this will end up sending many *tens of
megabytes* through the mail and should only be employed as an absolute
LAST resort!
3.2. CDROM
----------
FreeBSD 4.x-RELEASE and 3.x-RELEASE CDs may be ordered on CDROM from:
BSDi / Walnut Creek CDROM
4041 Pike Lane, Suite D
Concord CA 94520
USA
+1-800-786-9907, +1-925-674-0783, +1-925-674-0821 (FAX)
Or via the Internet from orders@cdrom.com or http://www.cdrom.com.
Their current catalog can be obtained via ftp from:
ftp://ftp.cdrom.com/cdrom/catalog
Cost per -RELEASE CD is $39.95 or $24.95 with a FreeBSD subscription.
FreeBSD SNAPshot CDs, when available, are $39.95 or $14.95 with a
FreeBSD-SNAP subscription (-RELEASE and -SNAP subscriptions are entirely
separate). With a subscription, you will automatically receive updates as
they are released. Your credit card will be billed when each disk is
shipped and you may cancel your subscription at any time without further
obligation.
Shipping (per order not per disc) is $5 in the US, Canada or Mexico
and $9.00 overseas. They accept Visa, Mastercard, Discover, American
Express or checks in U.S. Dollars and ship COD within the United
States. California residents please add 8.25% sales tax.
Should you be dissatisfied for any reason, the CD comes with an
unconditional return policy.
4. Upgrading from previous releases of FreeBSD
----------------------------------------------
If you're upgrading from a previous release of FreeBSD, most likely
it's 3.0 and there may be some issues affecting you, depending
of course on your chosen method of upgrading. There are two popular
ways of upgrading FreeBSD distributions:
o Using sources, via /usr/src
o Using sysinstall's (binary) upgrade option.
Please read the UPGRADE.TXT file for more information, preferably
before beginning an upgrade.
5. Reporting problems, making suggestions, submitting code.
-----------------------------------------------------------
Your suggestions, bug reports and contributions of code are always
valued - please do not hesitate to report any problems you may find
(preferably with a fix attached, if you can!).
The preferred method to submit bug reports from a machine with
Internet mail connectivity is to use the send-pr command or use the CGI
script at http://www.FreeBSD.org/send-pr.html. Bug reports
will be dutifully filed by our faithful bugfiler program and you can
be sure that we'll do our best to respond to all reported bugs as soon
as possible. Bugs filed in this way are also visible on our WEB site
in the support section and are therefore valuable both as bug reports
and as "signposts" for other users concerning potential problems to
watch out for.
If, for some reason, you are unable to use the send-pr command to
submit a bug report, you can try to send it to:
freebsd-bugs@FreeBSD.org
Note that send-pr itself is a shell script that should be easy to move
even onto a totally different system. We much prefer if you could use
this interface, since it make it easier to keep track of the problem
reports. However, before submitting, please try to make sure whether
the problem might have already been fixed since.
Otherwise, for any questions or tech support issues, please send mail to:
freebsd-questions@FreeBSD.org
If you're tracking the -current development efforts, you should
definitely join the -current mailing list, in order to keep abreast
of recent developments and changes that may affect the way you
use and maintain the system:
freebsd-current@FreeBSD.org
Additionally, being a volunteer effort, we are always happy to have
extra hands willing to help - there are already far more desired
enhancements than we'll ever be able to manage by ourselves! To
contact us on technical matters, or with offers of help, please send
mail to:
freebsd-hackers@FreeBSD.org
Please note that these mailing lists can experience *significant*
amounts of traffic and if you have slow or expensive mail access and
are only interested in keeping up with significant FreeBSD events, you
may find it preferable to subscribe instead to:
freebsd-announce@FreeBSD.org
All of the mailing lists can be freely joined by anyone wishing
to do so. Send mail to MajorDomo@FreeBSD.org and include the keyword
`help' on a line by itself somewhere in the body of the message. This
will give you more information on joining the various lists, accessing
archives, etc. There are a number of mailing lists targeted at
special interest groups not mentioned here, so send mail to majordomo
and ask about them!
6. Acknowledgments
------------------
FreeBSD represents the cumulative work of many hundreds, if not
thousands, of individuals from around the world who have worked very
hard to bring you this release. For a complete list of FreeBSD
project staffers, please see:
http://www.FreeBSD.org/handbook/staff.html
or, if you've loaded the doc distribution:
file:/usr/share/doc/handbook/staff.html
Special thanks also go to the many thousands of FreeBSD users and testers
all over the world, without whom this release simply would not have been
possible.
The FreeBSD Project
$FreeBSD$