freebsd-skq/sys/contrib/ena-com/ena_eth_com.h
Marcin Wojtas a195fab02b Update ena-com HAL to v1.1.4.3 and update driver accordingly
The newest ena-com HAL supports LLQv2 and introduces
API changes. In order not to break the driver compilation
it was updated/fixed in a following way:

* Change version of the driver to 0.8.0
* Provide reset cause when triggering reset of the device
* Reset device after attach fails
* In the reset task free management irq after calling ena_down. Admin
  queue can still be used before ena_down is called, or when it is
  being handled
* Do not reset device if ena_reset_task fails
* Move call of the ena_com_dev_reset to the ena_down() routine - it
  should be called only if interface was up
* Use different function for checking empty space on the sq ring
  (ena-com API change)
* Fix typo on ENA_TX_CLEANUP_THRESHOLD
* Change checking for EPERM with EOPNOTSUPP - change in the ena-com API
* Minor style fixes

Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Amazon.com, Inc.
               Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12143
2017-10-31 12:41:07 +00:00

187 lines
5.4 KiB
C

/*-
* BSD LICENSE
*
* Copyright (c) 2015-2017 Amazon.com, Inc. or its affiliates.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef ENA_ETH_COM_H_
#define ENA_ETH_COM_H_
#if defined(__cplusplus)
extern "C" {
#endif
#include "ena_com.h"
/* head update threshold in units of (queue size / ENA_COMP_HEAD_THRESH) */
#define ENA_COMP_HEAD_THRESH 4
struct ena_com_tx_ctx {
struct ena_com_tx_meta ena_meta;
struct ena_com_buf *ena_bufs;
/* For LLQ, header buffer - pushed to the device mem space */
void *push_header;
enum ena_eth_io_l3_proto_index l3_proto;
enum ena_eth_io_l4_proto_index l4_proto;
u16 num_bufs;
u16 req_id;
/* For regular queue, indicate the size of the header
* For LLQ, indicate the size of the pushed buffer
*/
u16 header_len;
u8 meta_valid;
u8 tso_enable;
u8 l3_csum_enable;
u8 l4_csum_enable;
u8 l4_csum_partial;
u8 df; /* Don't fragment */
};
struct ena_com_rx_ctx {
struct ena_com_rx_buf_info *ena_bufs;
enum ena_eth_io_l3_proto_index l3_proto;
enum ena_eth_io_l4_proto_index l4_proto;
bool l3_csum_err;
bool l4_csum_err;
/* fragmented packet */
bool frag;
u32 hash;
u16 descs;
int max_bufs;
};
int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
struct ena_com_tx_ctx *ena_tx_ctx,
int *nb_hw_desc);
int ena_com_rx_pkt(struct ena_com_io_cq *io_cq,
struct ena_com_io_sq *io_sq,
struct ena_com_rx_ctx *ena_rx_ctx);
int ena_com_add_single_rx_desc(struct ena_com_io_sq *io_sq,
struct ena_com_buf *ena_buf,
u16 req_id);
int ena_com_tx_comp_req_id_get(struct ena_com_io_cq *io_cq, u16 *req_id);
static inline void ena_com_unmask_intr(struct ena_com_io_cq *io_cq,
struct ena_eth_io_intr_reg *intr_reg)
{
ENA_REG_WRITE32(io_cq->bus, intr_reg->intr_control, io_cq->unmask_reg);
}
static inline int ena_com_free_desc(struct ena_com_io_sq *io_sq)
{
u16 tail, next_to_comp, cnt;
next_to_comp = io_sq->next_to_comp;
tail = io_sq->tail;
cnt = tail - next_to_comp;
return io_sq->q_depth - 1 - cnt;
}
/* Check if the submission queue has enough space to hold required_buffers */
static inline bool ena_com_sq_have_enough_space(struct ena_com_io_sq *io_sq,
u16 required_buffers)
{
int temp;
if (io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_HOST)
return ena_com_free_desc(io_sq) >= required_buffers;
/* This calculation doesn't need to be 100% accurate. So to reduce
* the calculation overhead just Subtract 2 lines from the free descs
* (one for the header line and one to compensate the devision
* down calculation.
*/
temp = required_buffers / io_sq->llq_info.descs_per_entry + 2;
return ena_com_free_desc(io_sq) > temp;
}
static inline int ena_com_write_sq_doorbell(struct ena_com_io_sq *io_sq)
{
u16 tail;
tail = io_sq->tail;
ena_trc_dbg("write submission queue doorbell for queue: %d tail: %d\n",
io_sq->qid, tail);
ENA_REG_WRITE32(io_sq->bus, tail, io_sq->db_addr);
return 0;
}
static inline int ena_com_update_dev_comp_head(struct ena_com_io_cq *io_cq)
{
u16 unreported_comp, head;
bool need_update;
head = io_cq->head;
unreported_comp = head - io_cq->last_head_update;
need_update = unreported_comp > (io_cq->q_depth / ENA_COMP_HEAD_THRESH);
if (io_cq->cq_head_db_reg && need_update) {
ena_trc_dbg("Write completion queue doorbell for queue %d: head: %d\n",
io_cq->qid, head);
ENA_REG_WRITE32(io_cq->bus, head, io_cq->cq_head_db_reg);
io_cq->last_head_update = head;
}
return 0;
}
static inline void ena_com_update_numa_node(struct ena_com_io_cq *io_cq,
u8 numa_node)
{
struct ena_eth_io_numa_node_cfg_reg numa_cfg;
if (!io_cq->numa_node_cfg_reg)
return;
numa_cfg.numa_cfg = (numa_node & ENA_ETH_IO_NUMA_NODE_CFG_REG_NUMA_MASK)
| ENA_ETH_IO_NUMA_NODE_CFG_REG_ENABLED_MASK;
ENA_REG_WRITE32(io_cq->bus, numa_cfg.numa_cfg, io_cq->numa_node_cfg_reg);
}
static inline void ena_com_comp_ack(struct ena_com_io_sq *io_sq, u16 elem)
{
io_sq->next_to_comp += elem;
}
#if defined(__cplusplus)
}
#endif
#endif /* ENA_ETH_COM_H_ */