stas 2a2b3ea928 - Add driver for Attansic L2 FastEthernet controller found on ... Asus EeePC and some Asus mainboards. Reviewed by: yongari, rpaulo, jhb Tested by: many Approved by: kib (mentor) MFC after: 1 week		2008-10-03 10:31:31 +00:00
..
acphy.c	Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL	2007-01-12 22:59:38 +00:00
acphyreg.h	- Correct the AC_MCTL_BYP_PCS constant.	2007-01-12 22:58:04 +00:00
amphy.c	Fix a typo in a comment.	2008-01-27 01:11:57 +00:00
amphyreg.h
atphy.c	- Add driver for Attansic L2 FastEthernet controller found on	2008-10-03 10:31:31 +00:00
atphyreg.h	Add Attansic/Atheros F1 PHY driver.	2008-05-19 01:12:10 +00:00
bmtphy.c
bmtphyreg.h
brgphy.c	Restore link state handling which was broken in rev 1.69.	2008-08-12 00:57:39 +00:00
brgphyreg.h	Add support for the BCM5906[M] adapters. These adapters only support	2008-04-29 19:47:13 +00:00
ciphy.c	Add Vitesse VSC8211 PHY which is found on Planex GU-1000T.	2008-09-30 07:30:05 +00:00
ciphyreg.h	Add support Vitesse VSC8601 PHY that is found on nVidia network	2007-06-06 06:55:49 +00:00
e1000phy.c	Save extended address register prior to switching to 1000BASE-X	2008-09-30 08:18:38 +00:00
e1000phyreg.h	Add 88E1116/88E1116R PHY support code that takes the PHY out of	2007-10-29 05:50:22 +00:00
exphy.c	- Take advantage of mii_phy_dev_probe().	2007-01-12 23:17:43 +00:00
gentbi.c	- Remove MIIF_NOISOLATE; there's generally no reason to let gentbi(4)	2007-10-29 21:11:55 +00:00
icsphy.c	Add icsphy(4), Integrated Circuit Systems PHY driver, ported from	2007-06-11 02:04:50 +00:00
icsphyreg.h	Add icsphy(4), Integrated Circuit Systems PHY driver, ported from	2007-06-11 02:04:50 +00:00
inphy.c	Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table	2007-01-12 22:27:46 +00:00
inphyreg.h
ip1000phy.c	Add support for IC Plus IP1001 PHY.	2008-04-05 00:52:07 +00:00
ip1000phyreg.h	Add support for IC Plus IP1001 PHY.	2008-04-05 00:52:07 +00:00
jmphy.c	Add JMicron JMP202/JMP211 PHY driver.	2008-05-27 01:16:40 +00:00
jmphyreg.h	Add JMicron JMP202/JMP211 PHY driver.	2008-05-27 01:16:40 +00:00
lxtphy.c	Add support for the Apple Big Mac (BMAC) Ethernet controller,	2008-06-07 22:58:32 +00:00
lxtphyreg.h
mii_physubr.c	Remove mii_media_from_bmcr(); all previous users have been converted to	2007-01-13 00:14:45 +00:00
mii.c	Revert bogusly committed file.	2008-08-23 07:46:58 +00:00
mii.h
miibus_if.m
miidevs	- Add driver for Attansic L2 FastEthernet controller found on	2008-10-03 10:31:31 +00:00
miivar.h	Remove mii_media_from_bmcr(); all previous users have been converted to	2007-01-13 00:14:45 +00:00
mlphy.c	Move the code that looks for the companion phy to a subroutine to make	2008-08-23 15:50:18 +00:00
nsgphy.c
nsgphyreg.h
nsphy.c	- Fix a typo in a comment.	2008-01-27 01:30:02 +00:00
nsphyreg.h
nsphyter.c	Add a driver for the National Semiconductor DP83815, DP83843 and	2008-01-27 01:10:41 +00:00
nsphyterreg.h	Add a driver for the National Semiconductor DP83815, DP83843 and	2008-01-27 01:10:41 +00:00
pnaphy.c
qsphy.c
qsphyreg.h
rgephy.c	Fix a copy/paste error	2008-08-06 07:52:59 +00:00
rgephyreg.h	Add RTL8211C(L) support.	2008-07-02 08:10:18 +00:00
rlphy.c	IEEE 802.3 Annex 28B.3 explicitly specifies the following relative	2007-11-16 10:25:36 +00:00
rlswitch.c	MFp4: add basic driver for RTL8305SC switch in PHY emulation	2007-01-05 01:46:26 +00:00
ruephy.c	- Take advantage of mii_phy_dev_probe() and mii_phy_setmedia().	2007-01-13 00:06:41 +00:00
ruephyreg.h
smcphy.c	This is a rewritten driver for the SMSC LAN91C111. It's based in part on the	2008-06-06 05:00:49 +00:00
tdkphy.c	IEEE 802.3 Annex 28B.3 explicitly specifies the following relative	2007-11-16 10:25:36 +00:00
tdkphyreg.h
tlphy.c	It turns out that my analysis of the error handling here was wrong.	2008-08-23 15:29:28 +00:00
tlphyreg.h
truephy.c	Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit	2008-06-20 19:30:44 +00:00
truephyreg.h	Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit	2008-06-20 19:30:44 +00:00
ukphy_subr.c	IEEE 802.3 Annex 28B.3 explicitly specifies the following relative	2007-11-16 10:25:36 +00:00
ukphy.c	- Don't set MIIF_NOISOLATE so ukphy(4) can be used in configurations with	2007-01-20 00:52:29 +00:00
xmphy.c
xmphyreg.h