freebsd-skq/sys/dev/amr/amr.c
Poul-Henning Kamp 21144e3bf1 Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new
field in struct buf: b_iocmd.  The b_iocmd is enforced to have
exactly one bit set.

B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.

Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.

Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue.  It is likely to write on your disk
where it should have been reading.

This change is a step in the direction towards a stackable BIO capability.

A lot of this patch were machine generated (Thanks to style(9) compliance!)

Vinum users:  Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00

1508 lines
43 KiB
C

/*-
* Copyright (c) 1999 Michael Smith
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Driver for the AMI MegaRaid family of controllers
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/buf.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/devicestat.h>
#include <sys/disk.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <machine/clock.h>
#include <sys/rman.h>
#include <dev/amr/amrio.h>
#include <dev/amr/amrreg.h>
#include <dev/amr/amrvar.h>
#if 0
#define debug(fmt, args...) printf("%s: " fmt "\n", __FUNCTION__ , ##args)
#else
#define debug(fmt, args...)
#endif
#define AMR_CDEV_MAJOR 132
static struct cdevsw amr_cdevsw = {
/* open */ amr_open,
/* close */ amr_close,
/* read */ noread,
/* write */ nowrite,
/* ioctl */ amr_ioctl,
/* poll */ nopoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "amr",
/* maj */ AMR_CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ 0,
/* bmaj */ 254 /* XXX magic no-bdev */
};
static int cdev_registered = 0;
devclass_t amr_devclass;
/*
* Command wrappers
*/
static int amr_query_controller(struct amr_softc *sc);
static void *amr_enquiry(struct amr_softc *sc, size_t bufsize,
u_int8_t cmd, u_int8_t cmdsub, u_int8_t cmdqual);
static int amr_flush(struct amr_softc *sc);
static void amr_startio(struct amr_softc *sc);
static void amr_completeio(struct amr_command *ac);
/*
* Command processing.
*/
static int amr_wait_command(struct amr_command *ac);
static int amr_poll_command(struct amr_command *ac);
static int amr_getslot(struct amr_command *ac);
static void amr_mapcmd(struct amr_command *ac);
static void amr_unmapcmd(struct amr_command *ac);
static int amr_start(struct amr_command *ac);
static int amr_done(struct amr_softc *sc);
static void amr_complete(struct amr_softc *sc);
/*
* Command buffer allocation.
*/
static struct amr_command *amr_alloccmd(struct amr_softc *sc);
static void amr_releasecmd(struct amr_command *ac);
static void amr_freecmd(struct amr_command *ac);
/*
* Interface-specific shims
*/
static void amr_quartz_submit_command(struct amr_softc *sc);
static int amr_quartz_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave);
static void amr_quartz_attach_mailbox(struct amr_softc *sc);
static void amr_std_submit_command(struct amr_softc *sc);
static int amr_std_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave);
static void amr_std_attach_mailbox(struct amr_softc *sc);
/*
* Debugging
*/
static void amr_printcommand(struct amr_command *ac);
/********************************************************************************
********************************************************************************
Public Interfaces
********************************************************************************
********************************************************************************/
/********************************************************************************
* Free all of the resources associated with (sc)
*
* Should not be called if the controller is active.
*/
void
amr_free(struct amr_softc *sc)
{
struct amr_command *ac;
u_int8_t *p;
debug("called");
/* throw away any command buffers */
while ((ac = TAILQ_FIRST(&sc->amr_freecmds)) != NULL) {
TAILQ_REMOVE(&sc->amr_freecmds, ac, ac_link);
amr_freecmd(ac);
}
/* destroy data-transfer DMA tag */
if (sc->amr_buffer_dmat)
bus_dma_tag_destroy(sc->amr_buffer_dmat);
/* free and destroy DMA memory and tag for s/g lists */
if (sc->amr_sgtable)
bus_dmamem_free(sc->amr_sg_dmat, sc->amr_sgtable, sc->amr_sg_dmamap);
if (sc->amr_sg_dmat)
bus_dma_tag_destroy(sc->amr_sg_dmat);
/* free and destroy DMA memory and tag for mailbox */
if (sc->amr_mailbox) {
p = (u_int8_t *)sc->amr_mailbox;
bus_dmamem_free(sc->amr_sg_dmat, p - 16, sc->amr_sg_dmamap);
}
if (sc->amr_sg_dmat)
bus_dma_tag_destroy(sc->amr_sg_dmat);
/* disconnect the interrupt handler */
if (sc->amr_intr)
bus_teardown_intr(sc->amr_dev, sc->amr_irq, sc->amr_intr);
if (sc->amr_irq != NULL)
bus_release_resource(sc->amr_dev, SYS_RES_IRQ, 0, sc->amr_irq);
/* destroy the parent DMA tag */
if (sc->amr_parent_dmat)
bus_dma_tag_destroy(sc->amr_parent_dmat);
/* release the register window mapping */
if (sc->amr_reg != NULL)
bus_release_resource(sc->amr_dev,
(sc->amr_type == AMR_TYPE_QUARTZ) ? SYS_RES_MEMORY : SYS_RES_IOPORT,
AMR_CFG_BASE, sc->amr_reg);
}
/********************************************************************************
* Allocate and map the scatter/gather table in bus space.
*/
static void
amr_dma_map_sg(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
struct amr_softc *sc = (struct amr_softc *)arg;
debug("called");
/* save base of s/g table's address in bus space */
sc->amr_sgbusaddr = segs->ds_addr;
}
static int
amr_sglist_map(struct amr_softc *sc)
{
size_t segsize;
int error;
debug("called");
/* destroy any existing mappings */
if (sc->amr_sgtable)
bus_dmamem_free(sc->amr_sg_dmat, sc->amr_sgtable, sc->amr_sg_dmamap);
if (sc->amr_sg_dmat)
bus_dma_tag_destroy(sc->amr_sg_dmat);
/*
* Create a single tag describing a region large enough to hold all of
* the s/g lists we will need.
*/
segsize = sizeof(struct amr_sgentry) * AMR_NSEG * sc->amr_maxio;
error = bus_dma_tag_create(sc->amr_parent_dmat, /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
segsize, 1, /* maxsize, nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
&sc->amr_sg_dmat);
if (error != 0) {
device_printf(sc->amr_dev, "can't allocate scatter/gather DMA tag\n");
return(ENOMEM);
}
/*
* Allocate enough s/g maps for all commands and permanently map them into
* controller-visible space.
*
* XXX this assumes we can get enough space for all the s/g maps in one
* contiguous slab. We may need to switch to a more complex arrangement where
* we allocate in smaller chunks and keep a lookup table from slot to bus address.
*/
error = bus_dmamem_alloc(sc->amr_sg_dmat, (void **)&sc->amr_sgtable, BUS_DMA_NOWAIT, &sc->amr_sg_dmamap);
if (error) {
device_printf(sc->amr_dev, "can't allocate s/g table\n");
return(ENOMEM);
}
bus_dmamap_load(sc->amr_sg_dmat, sc->amr_sg_dmamap, sc->amr_sgtable, segsize, amr_dma_map_sg, sc, 0);
return(0);
}
/********************************************************************************
* Allocate and set up mailbox areas for the controller (sc)
*
* The basic mailbox structure should be 16-byte aligned. This means that the
* mailbox64 structure has 4 bytes hanging off the bottom.
*/
static void
amr_map_mailbox(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
struct amr_softc *sc = (struct amr_softc *)arg;
debug("called");
/* save phsyical base of the basic mailbox structure */
sc->amr_mailboxphys = segs->ds_addr + 16;
}
static int
amr_setup_mbox(struct amr_softc *sc)
{
int error;
u_int8_t *p;
debug("called");
/*
* Create a single tag describing a region large enough to hold the entire
* mailbox.
*/
error = bus_dma_tag_create(sc->amr_parent_dmat, /* parent */
16, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
sizeof(struct amr_mailbox) + 16, 1, /* maxsize, nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
&sc->amr_mailbox_dmat);
if (error != 0) {
device_printf(sc->amr_dev, "can't allocate mailbox tag\n");
return(ENOMEM);
}
/*
* Allocate the mailbox structure and permanently map it into
* controller-visible space.
*/
error = bus_dmamem_alloc(sc->amr_mailbox_dmat, (void **)&p, BUS_DMA_NOWAIT,
&sc->amr_mailbox_dmamap);
if (error) {
device_printf(sc->amr_dev, "can't allocate mailbox memory\n");
return(ENOMEM);
}
bus_dmamap_load(sc->amr_mailbox_dmat, sc->amr_mailbox_dmamap, p,
sizeof(struct amr_mailbox64), amr_map_mailbox, sc, 0);
/*
* Conventional mailbox is inside the mailbox64 region.
*/
bzero(p, sizeof(struct amr_mailbox64));
sc->amr_mailbox64 = (struct amr_mailbox64 *)(p + 12);
sc->amr_mailbox = (struct amr_mailbox *)(p + 16);
if (sc->amr_type == AMR_TYPE_STD) {
/* XXX we have to tell the controller where we put it */
}
return(0);
}
/********************************************************************************
* Initialise the controller and softc.
*/
int
amr_attach(struct amr_softc *sc)
{
int rid, error;
/*
* Initialise per-controller queues.
*/
TAILQ_INIT(&sc->amr_work);
TAILQ_INIT(&sc->amr_freecmds);
bufq_init(&sc->amr_bufq);
/*
* Configure for this controller type.
*/
if (sc->amr_type == AMR_TYPE_QUARTZ) {
sc->amr_submit_command = amr_quartz_submit_command;
sc->amr_get_work = amr_quartz_get_work;
sc->amr_attach_mailbox = amr_quartz_attach_mailbox;
} else {
sc->amr_submit_command = amr_std_submit_command;
sc->amr_get_work = amr_std_get_work;
sc->amr_attach_mailbox = amr_std_attach_mailbox;
}
/*
* Allocate and connect our interrupt.
*/
rid = 0;
sc->amr_irq = bus_alloc_resource(sc->amr_dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE);
if (sc->amr_irq == NULL) {
device_printf(sc->amr_dev, "couldn't allocate interrupt\n");
amr_free(sc);
return(ENXIO);
}
error = bus_setup_intr(sc->amr_dev, sc->amr_irq, INTR_TYPE_BIO, amr_intr, sc, &sc->amr_intr);
if (error) {
device_printf(sc->amr_dev, "couldn't set up interrupt\n");
amr_free(sc);
return(ENXIO);
}
/*
* Create DMA tag for mapping buffers into controller-addressable space.
*/
error = bus_dma_tag_create(sc->amr_parent_dmat, /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MAXBSIZE, AMR_NSEG, /* maxsize, nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
&sc->amr_buffer_dmat);
if (error != 0) {
device_printf(sc->amr_dev, "can't allocate buffer DMA tag\n");
return(ENOMEM);
}
/*
* Allocate and set up mailbox in a bus-visible fashion, attach to controller.
*/
if ((error = amr_setup_mbox(sc)) != 0)
return(error);
sc->amr_attach_mailbox(sc);
/*
* Build a temporary set of scatter/gather buffers.
*/
sc->amr_maxio = 2;
if (amr_sglist_map(sc))
return(ENXIO);
/*
* Quiz controller for features and limits.
*/
if (amr_query_controller(sc))
return(ENXIO);
/*
* Rebuild the scatter/gather buffers now we know how many we need.
*/
if (amr_sglist_map(sc))
return(ENXIO);
return(0);
}
/********************************************************************************
* Locate disk resources and attach children to them.
*/
void
amr_startup(struct amr_softc *sc)
{
struct amr_logdrive *dr;
int i, error;
debug("called");
/* get up-to-date drive information */
if (amr_query_controller(sc)) {
device_printf(sc->amr_dev, "couldn't scan controller for drives\n");
return;
}
/* iterate over available drives */
for (i = 0, dr = &sc->amr_drive[0]; (i < AMR_MAXLD) && (dr->al_size != 0xffffffff); i++, dr++) {
/* are we already attached to this drive? */
if (dr->al_disk == 0) {
/* generate geometry information */
if (dr->al_size > 0x200000) { /* extended translation? */
dr->al_heads = 255;
dr->al_sectors = 63;
} else {
dr->al_heads = 64;
dr->al_sectors = 32;
}
dr->al_cylinders = dr->al_size / (dr->al_heads * dr->al_sectors);
dr->al_disk = device_add_child(sc->amr_dev, NULL, -1);
if (dr->al_disk == 0)
device_printf(sc->amr_dev, "device_add_child failed\n");
device_set_ivars(dr->al_disk, dr);
}
}
if ((error = bus_generic_attach(sc->amr_dev)) != 0)
device_printf(sc->amr_dev, "bus_generic_attach returned %d\n", error);
/* mark controller back up */
sc->amr_state &= ~AMR_STATE_SHUTDOWN;
/* interrupts will be enabled before we do anything more */
sc->amr_state |= AMR_STATE_INTEN;
}
/********************************************************************************
* Disconnect from the controller completely, in preparation for unload.
*/
int
amr_detach(device_t dev)
{
struct amr_softc *sc = device_get_softc(dev);
int error;
debug("called");
if (sc->amr_state & AMR_STATE_OPEN)
return(EBUSY);
if ((error = amr_shutdown(dev)))
return(error);
amr_free(sc);
/*
* Deregister the control device on last detach.
*/
if (--cdev_registered == 0)
cdevsw_remove(&amr_cdevsw);
return(0);
}
/********************************************************************************
* Bring the controller down to a dormant state and detach all child devices.
*
* This function is called before detach, system shutdown, or before performing
* an operation which may add or delete system disks. (Call amr_startup to
* resume normal operation.)
*
* Note that we can assume that the bufq on the controller is empty, as we won't
* allow shutdown if any device is open.
*/
int
amr_shutdown(device_t dev)
{
struct amr_softc *sc = device_get_softc(dev);
struct amrd_softc *ad;
int i, s, error;
debug("called");
s = splbio();
error = 0;
/* assume we're going to shut down */
sc->amr_state |= AMR_STATE_SHUTDOWN;
for (i = 0; i < AMR_MAXLD; i++) {
if (sc->amr_drive[i].al_disk != 0) {
ad = device_get_softc(sc->amr_drive[i].al_disk);
if (ad->amrd_flags & AMRD_OPEN) { /* drive is mounted, abort shutdown */
sc->amr_state &= ~AMR_STATE_SHUTDOWN;
device_printf(sc->amr_drive[i].al_disk, "still open, can't shutdown\n");
error = EBUSY;
goto out;
}
}
}
/* flush controller */
device_printf(sc->amr_dev, "flushing cache...");
if (amr_flush(sc)) {
printf("failed\n");
} else {
printf("done\n");
}
/* delete all our child devices */
for (i = 0; i < AMR_MAXLD; i++) {
if (sc->amr_drive[i].al_disk != 0) {
if ((error = device_delete_child(sc->amr_dev, sc->amr_drive[i].al_disk)) != 0)
goto out;
sc->amr_drive[i].al_disk = 0;
}
}
bus_generic_detach(sc->amr_dev);
out:
splx(s);
return(error);
}
/********************************************************************************
* Bring the controller to a quiescent state, ready for system suspend.
*/
int
amr_suspend(device_t dev)
{
struct amr_softc *sc = device_get_softc(dev);
debug("called");
sc->amr_state |= AMR_STATE_SUSPEND;
/* flush controller */
device_printf(sc->amr_dev, "flushing cache...");
printf("%s\n", amr_flush(sc) ? "failed" : "done");
return(0);
}
/********************************************************************************
* Bring the controller back to a state ready for operation.
*/
int
amr_resume(device_t dev)
{
struct amr_softc *sc = device_get_softc(dev);
debug("called");
sc->amr_state &= ~AMR_STATE_SUSPEND;
return(0);
}
/*******************************************************************************
* Take an interrupt, or be poked by other code to look for interrupt-worthy
* status.
*/
void
amr_intr(void *arg)
{
struct amr_softc *sc = (struct amr_softc *)arg;
int worked;
debug("called on %p", sc);
/* spin collecting finished commands, process them if we find anything */
worked = 0;
while (amr_done(sc))
worked = 1;
if (worked)
amr_complete(sc);
};
/*******************************************************************************
* Receive a buf structure from a child device and queue it on a particular
* disk resource, then poke the disk resource to start as much work as it can.
*/
int
amr_submit_buf(struct amr_softc *sc, struct buf *bp)
{
int s;
debug("called");
s = splbio();
bufq_insert_tail(&sc->amr_bufq, bp);
splx(s);
sc->amr_waitbufs++;
amr_startio(sc);
return(0);
}
/********************************************************************************
* Accept an open operation on the control device.
*/
int
amr_open(dev_t dev, int flags, int fmt, struct proc *p)
{
int unit = minor(dev);
struct amr_softc *sc = devclass_get_softc(amr_devclass, unit);
sc->amr_state |= AMR_STATE_OPEN;
return(0);
}
/********************************************************************************
* Accept the last close on the control device.
*/
int
amr_close(dev_t dev, int flags, int fmt, struct proc *p)
{
int unit = minor(dev);
struct amr_softc *sc = devclass_get_softc(amr_devclass, unit);
sc->amr_state &= ~AMR_STATE_OPEN;
return (0);
}
/********************************************************************************
* Handle controller-specific control operations.
*/
int
amr_ioctl(dev_t dev, u_long cmd, caddr_t addr, int32_t flag, struct proc *p)
{
switch(cmd) {
default:
return(ENOTTY);
}
}
/********************************************************************************
* Handle operations requested by a drive connected to this controller.
*/
int
amr_submit_ioctl(struct amr_softc *sc, struct amr_logdrive *drive, u_long cmd,
caddr_t addr, int32_t flag, struct proc *p)
{
return(ENOTTY);
}
/********************************************************************************
********************************************************************************
Command Wrappers
********************************************************************************
********************************************************************************/
/********************************************************************************
* Interrogate the controller for the operational parameters we require.
*/
static int
amr_query_controller(struct amr_softc *sc)
{
void *buf;
int i;
/* try to issue an ENQUIRY3 command */
if ((buf = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_ENQ3,
AMR_CONFIG_ENQ3_SOLICITED_FULL)) == NULL) {
struct amr_enquiry *ae;
/* failed, try the old ENQUIRY command */
if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_ENQUIRY, 0, 0)) == NULL) {
device_printf(sc->amr_dev, "could not obtain configuration data from controller\n");
return(1);
}
/* first-time enquiry? */
if (sc->amr_maxdrives == 0) {
device_printf(sc->amr_dev, "firmware %.4s bios %.4s %dMB memory\n",
ae->ae_adapter.aa_firmware, ae->ae_adapter.aa_bios,
ae->ae_adapter.aa_memorysize);
}
sc->amr_maxdrives = 8;
sc->amr_maxio = ae->ae_adapter.aa_maxio;
for (i = 0; i < ae->ae_ldrv.al_numdrives; i++) {
sc->amr_drive[i].al_size = ae->ae_ldrv.al_size[i];
sc->amr_drive[i].al_state = ae->ae_ldrv.al_state[i];
sc->amr_drive[i].al_properties = ae->ae_ldrv.al_properties[i];
debug(" drive %d: %d state %x properties %x\n", i, sc->amr_drive[i].al_size,
sc->amr_drive[i].al_state, sc->amr_drive[i].al_properties);
}
for (; i < AMR_MAXLD; i++)
sc->amr_drive[i].al_size = 0xffffffff;
free(ae, M_DEVBUF);
} else {
free(buf, M_DEVBUF);
sc->amr_maxdrives = 40;
/* get static product info */
if ((buf = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_PRODINFO, 0)) == NULL) {
device_printf(sc->amr_dev, "controller supports 40ld but CONFIG_PRODINFO failed\n");
return(1);
}
free(buf, M_DEVBUF);
device_printf(sc->amr_dev, "40LD firmware unsupported; send controller to msmith@freebsd.org\n");
return(1);
}
return(0);
}
/********************************************************************************
* Run a generic enquiry-style command.
*/
static void *
amr_enquiry(struct amr_softc *sc, size_t bufsize, u_int8_t cmd, u_int8_t cmdsub, u_int8_t cmdqual)
{
struct amr_command *ac;
void *result;
u_int8_t *mbox;
int error;
debug("called");
error = 1;
result = NULL;
/* get ourselves a command buffer */
if ((ac = amr_alloccmd(sc)) == NULL)
goto out;
/* allocate the response structure */
if ((result = malloc(bufsize, M_DEVBUF, M_NOWAIT)) == NULL)
goto out;
/* get a command slot */
ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT;
if (amr_getslot(ac))
goto out;
/* map the command so the controller can see it */
ac->ac_data = result;
ac->ac_length = bufsize;
amr_mapcmd(ac);
/* build the command proper */
mbox = (u_int8_t *)&ac->ac_mailbox; /* XXX want a real structure for this? */
mbox[0] = cmd;
mbox[2] = cmdsub;
mbox[3] = cmdqual;
ac->ac_mailbox.mb_physaddr = ac->ac_dataphys;
/* run the command in polled/wait mode as suits the current mode */
if ((sc->amr_state & AMR_STATE_INTEN) ? amr_wait_command(ac) : amr_poll_command(ac))
goto out;
error = ac->ac_status;
out:
if (ac != NULL)
amr_releasecmd(ac);
if ((error != 0) && (result != NULL)) {
free(result, M_DEVBUF);
result = NULL;
}
return(result);
}
/********************************************************************************
* Flush the controller's internal cache, return status.
*/
static int
amr_flush(struct amr_softc *sc)
{
struct amr_command *ac;
int error;
/* get ourselves a command buffer */
error = 1;
if ((ac = amr_alloccmd(sc)) == NULL)
goto out;
/* get a command slot */
ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT;
if (amr_getslot(ac))
goto out;
/* build the command proper */
ac->ac_mailbox.mb_command = AMR_CMD_FLUSH;
/* run the command in polled/wait mode as suits the current mode */
if ((sc->amr_state & AMR_STATE_INTEN) ? amr_wait_command(ac) : amr_poll_command(ac))
goto out;
error = ac->ac_status;
out:
if (ac != NULL)
amr_releasecmd(ac);
return(error);
}
/********************************************************************************
* Pull as much work off the softc's work queue as possible and give it to the
* controller. Leave a couple of slots free for emergencies.
*
* We avoid running at splbio() whenever possible.
*/
static void
amr_startio(struct amr_softc *sc)
{
struct amr_command *ac;
struct amrd_softc *amrd;
struct buf *bp;
int blkcount;
int driveno;
int cmd;
int s;
/* spin until something prevents us from doing any work */
s = splbio();
for (;;) {
/* see if there's work to be done */
if ((bp = bufq_first(&sc->amr_bufq)) == NULL)
break;
/* get a command */
if ((ac = amr_alloccmd(sc)) == NULL)
break;
/* get a slot for the command */
if (amr_getslot(ac) != 0) {
amr_releasecmd(ac);
break;
}
/* get the buf containing our work */
bufq_remove(&sc->amr_bufq, bp);
sc->amr_waitbufs--;
splx(s);
/* connect the buf to the command */
ac->ac_complete = amr_completeio;
ac->ac_private = bp;
ac->ac_data = bp->b_data;
ac->ac_length = bp->b_bcount;
if (bp->b_iocmd == BIO_READ) {
ac->ac_flags |= AMR_CMD_DATAIN;
cmd = AMR_CMD_LREAD;
} else {
ac->ac_flags |= AMR_CMD_DATAOUT;
cmd = AMR_CMD_LWRITE;
}
/* map the command so the controller can work with it */
amr_mapcmd(ac);
/* build a suitable I/O command (assumes 512-byte rounded transfers) */
amrd = (struct amrd_softc *)bp->b_driver1;
driveno = amrd->amrd_drive - &sc->amr_drive[0];
blkcount = bp->b_bcount / AMR_BLKSIZE;
if ((bp->b_pblkno + blkcount) > sc->amr_drive[driveno].al_size)
device_printf(sc->amr_dev, "I/O beyond end of unit (%u,%d > %u)\n",
bp->b_pblkno, blkcount, sc->amr_drive[driveno].al_size);
/*
* Build the I/O command.
*/
ac->ac_mailbox.mb_command = cmd;
ac->ac_mailbox.mb_blkcount = blkcount;
ac->ac_mailbox.mb_lba = bp->b_pblkno;
ac->ac_mailbox.mb_physaddr = ac->ac_sgphys;
ac->ac_mailbox.mb_drive = driveno;
ac->ac_mailbox.mb_nsgelem = ac->ac_nsgent;
/* try to give command to controller */
if (amr_start(ac) != 0) {
/* fail the command */
ac->ac_status = AMR_STATUS_WEDGED;
amr_completeio(ac);
}
s = splbio();
}
splx(s);
}
/********************************************************************************
* Handle completion of an I/O command.
*/
static void
amr_completeio(struct amr_command *ac)
{
struct amr_softc *sc = ac->ac_sc;
struct buf *bp = (struct buf *)ac->ac_private;
if (ac->ac_status != AMR_STATUS_SUCCESS) { /* could be more verbose here? */
bp->b_error = EIO;
bp->b_flags |= B_ERROR;
switch(ac->ac_status) {
/* XXX need more information on I/O error reasons */
default:
device_printf(sc->amr_dev, "I/O error - %x\n", ac->ac_status);
amr_printcommand(ac);
break;
}
}
amr_releasecmd(ac);
amrd_intr(bp);
}
/********************************************************************************
********************************************************************************
Command Processing
********************************************************************************
********************************************************************************/
/********************************************************************************
* Take a command, submit it to the controller and sleep until it completes
* or fails. Interrupts must be enabled, returns nonzero on error.
*/
static int
amr_wait_command(struct amr_command *ac)
{
struct amr_softc *sc = ac->ac_sc;
int error, count;
debug("called");
ac->ac_complete = NULL;
ac->ac_private = ac;
if ((error = amr_start(ac)) != 0)
return(error);
count = 0;
/* XXX better timeout? */
while ((ac->ac_status == AMR_STATUS_BUSY) && (count < 30)) {
tsleep(ac->ac_private, PRIBIO | PCATCH, "amrwcmd", hz);
}
if (ac->ac_status != 0) {
device_printf(sc->amr_dev, "I/O error 0x%x\n", ac->ac_status);
return(EIO);
}
return(0);
}
/********************************************************************************
* Take a command, submit it to the controller and busy-wait for it to return.
* Returns nonzero on error. Can be safely called with interrupts enabled.
*/
static int
amr_poll_command(struct amr_command *ac)
{
struct amr_softc *sc = ac->ac_sc;
int error, count, s;
debug("called");
ac->ac_complete = NULL;
ac->ac_private = NULL;
if ((error = amr_start(ac)) != 0)
return(error);
count = 0;
do {
/*
* Poll for completion, although the interrupt handler may beat us to it.
* Note that the timeout here is somewhat arbitrary.
*/
amr_done(sc);
} while ((ac->ac_status == AMR_STATUS_BUSY) && (count++ < 100000));
s = splbio();
if (ac->ac_status != AMR_STATUS_BUSY) {
TAILQ_REMOVE(&sc->amr_work, ac, ac_link);
sc->amr_workcount--;
error = 0;
} else {
/* take the command out of the busy list, mark slot as bogus */
sc->amr_busycmd[ac->ac_slot] = (struct amr_command *)sc;
error = EIO;
device_printf(sc->amr_dev, "I/O error 0x%x\n", ac->ac_status);
}
splx(s);
return(error);
}
/********************************************************************************
* Get a free command slot.
*/
static int
amr_getslot(struct amr_command *ac)
{
struct amr_softc *sc = ac->ac_sc;
int s, slot, limit;
debug("called");
/* enforce slot usage limit */
limit = (ac->ac_flags & AMR_CMD_PRIORITY) ? sc->amr_maxio : sc->amr_maxio - 4;
if (sc->amr_busycmdcount > limit)
return(EBUSY);
/*
* Allocate a slot
*/
s = splbio();
for (slot = 0; slot < sc->amr_maxio; slot++) {
if (sc->amr_busycmd[slot] == NULL)
break;
}
if (slot < sc->amr_maxio) {
sc->amr_busycmdcount++;
sc->amr_busycmd[slot] = ac;
}
splx(s);
/* out of slots? */
if (slot >= sc->amr_maxio)
return(EBUSY);
ac->ac_slot = slot;
return(0);
}
/********************************************************************************
* Map/unmap (ac)'s data in the controller's addressable space.
*/
static void
amr_setup_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error)
{
struct amr_command *ac = (struct amr_command *)arg;
struct amr_softc *sc = ac->ac_sc;
struct amr_sgentry *sg;
int i;
debug("called");
/* get base address of s/g table */
sg = sc->amr_sgtable + (ac->ac_slot * AMR_NSEG);
/* save s/g table information in command */
ac->ac_nsgent = nsegments;
ac->ac_sgphys = sc->amr_sgbusaddr + (ac->ac_slot * AMR_NSEG * sizeof(struct amr_sgentry));
ac->ac_dataphys = segs[0].ds_addr;
/* populate s/g table */
for (i = 0; i < nsegments; i++, sg++) {
sg->sg_addr = segs[i].ds_addr;
sg->sg_count = segs[i].ds_len;
}
}
static void
amr_mapcmd(struct amr_command *ac)
{
struct amr_softc *sc = ac->ac_sc;
debug("called");
/* if the command involves data at all */
if (ac->ac_data != NULL) {
/* map the data buffer into bus space and build the s/g list */
bus_dmamap_load(sc->amr_buffer_dmat, ac->ac_dmamap, ac->ac_data, ac->ac_length,
amr_setup_dmamap, ac, 0);
if (ac->ac_flags & AMR_CMD_DATAIN)
bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_dmamap, BUS_DMASYNC_PREREAD);
if (ac->ac_flags & AMR_CMD_DATAOUT)
bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_dmamap, BUS_DMASYNC_PREWRITE);
}
}
static void
amr_unmapcmd(struct amr_command *ac)
{
struct amr_softc *sc = ac->ac_sc;
debug("called");
/* if the command involved data at all */
if (ac->ac_data != NULL) {
if (ac->ac_flags & AMR_CMD_DATAIN)
bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_dmamap, BUS_DMASYNC_POSTREAD);
if (ac->ac_flags & AMR_CMD_DATAOUT)
bus_dmamap_sync(sc->amr_buffer_dmat, ac->ac_dmamap, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->amr_buffer_dmat, ac->ac_dmamap);
}
}
/********************************************************************************
* Take a command and give it to the controller. Take care of any completed
* commands we encouter while waiting.
*/
static int
amr_start(struct amr_command *ac)
{
struct amr_softc *sc = ac->ac_sc;
int worked, done, s, i;
debug("called");
/*
* Save the slot number so that we can locate this command when complete.
* Note that ident = 0 seems to be special, so we don't use it.
*/
ac->ac_mailbox.mb_ident = ac->ac_slot + 1;
/* set the busy flag when we copy the mailbox in */
ac->ac_mailbox.mb_busy = 1;
/* set impossible status so that a woken sleeper can tell the command is busy */
ac->ac_status = AMR_STATUS_BUSY;
/* spin waiting for the mailbox */
debug("wait for mailbox");
for (i = 100000, done = 0, worked = 0; (i > 0) && !done; i--) {
s = splbio();
/* is the mailbox free? */
if (sc->amr_mailbox->mb_busy == 0) {
debug("got mailbox");
sc->amr_mailbox64->mb64_segment = 0;
bcopy(&ac->ac_mailbox, sc->amr_mailbox, AMR_MBOX_CMDSIZE);
sc->amr_submit_command(sc);
done = 1;
sc->amr_workcount++;
TAILQ_INSERT_TAIL(&sc->amr_work, ac, ac_link);
/* not free, try to clean up while we wait */
} else {
debug("busy flag %x\n", sc->amr_mailbox->mb_busy);
worked = amr_done(sc);
}
splx(s);
}
/* do completion processing if we picked anything up */
if (worked)
amr_complete(sc);
/* command is enqueued? */
if (done) {
ac->ac_stamp = time_second;
debug("posted command");
return(0);
}
/*
* The controller wouldn't take the command. Revoke the slot
* that the command was given and return with a bad status.
*/
sc->amr_busycmd[ac->ac_slot] = NULL;
device_printf(sc->amr_dev, "controller wedged (not taking commands)\n");
ac->ac_status = AMR_STATUS_WEDGED;
return(EIO);
}
/********************************************************************************
* Extract one or more completed commands from the controller (sc)
*
* Returns nonzero if any commands on the work queue were marked as completed.
*/
static int
amr_done(struct amr_softc *sc)
{
struct amr_command *ac;
struct amr_mailbox mbox;
int i, idx, result;
debug("called");
/* See if there's anything for us to do */
result = 0;
if (sc->amr_get_work(sc, &mbox)) {
/* iterate over completed commands */
for (i = 0; i < mbox.mb_nstatus; i++) {
/* get pointer to busy command */
idx = mbox.mb_completed[i] - 1;
ac = sc->amr_busycmd[idx];
/* really a busy command? */
if (ac != NULL) {
/* pull the command from the busy index */
sc->amr_busycmd[idx] = NULL;
sc->amr_busycmdcount--;
/* unmap data buffer */
amr_unmapcmd(ac);
/* aborted command? */
if (ac == (struct amr_command *)sc) {
device_printf(sc->amr_dev, "aborted command completed (%d)\n", idx);
ac = NULL;
/* completed normally, save status */
} else {
ac->ac_status = mbox.mb_status;
debug("completed command with status %x", mbox.mb_status);
}
result = 1;
}
}
}
return(result);
}
/********************************************************************************
* Do completion processing on done commands on (sc)
*/
static void
amr_complete(struct amr_softc *sc)
{
struct amr_command *ac, *nc;
int s, count;
debug("called");
count = 0;
s = splbio();
ac = TAILQ_FIRST(&sc->amr_work);
while (ac != NULL) {
nc = TAILQ_NEXT(ac, ac_link);
/* Skip if command is still active */
if (ac->ac_status != AMR_STATUS_BUSY) {
/*
* Is there a completion handler?
*/
if (ac->ac_complete != NULL) {
/* remove and give to completion handler */
TAILQ_REMOVE(&sc->amr_work, ac, ac_link);
sc->amr_workcount--;
ac->ac_complete(ac);
/*
* Is someone sleeping on this one?
*/
} else if (ac->ac_private != NULL) {
/* remove and wake up */
TAILQ_REMOVE(&sc->amr_work, ac, ac_link);
sc->amr_workcount--;
wakeup_one(ac->ac_private);
/*
* Leave it for a polling caller.
*/
} else {
}
}
ac = nc;
}
splx(s);
/* queue more work if we can */
amr_startio(sc);
}
/********************************************************************************
********************************************************************************
Command Buffer Management
********************************************************************************
********************************************************************************/
/********************************************************************************
* Get a new command buffer.
*
* This may return NULL in low-memory cases.
*
* Note that using malloc() is expensive (the command buffer is << 1 page) but
* necessary if we are to be a loadable module before the zone allocator is fixed.
*
* If possible, we recycle a command buffer that's been used before.
*
* XXX Note that command buffers are not cleaned out - it is the caller's
* responsibility to ensure that all required fields are filled in before
* using a buffer.
*/
static struct amr_command *
amr_alloccmd(struct amr_softc *sc)
{
struct amr_command *ac;
int error;
int s;
debug("called");
s = splbio();
if ((ac = TAILQ_FIRST(&sc->amr_freecmds)) != NULL)
TAILQ_REMOVE(&sc->amr_freecmds, ac, ac_link);
splx(s);
/* allocate a new command buffer? */
if (ac == NULL) {
ac = (struct amr_command *)malloc(sizeof(*ac), M_DEVBUF, M_NOWAIT);
if (ac != NULL) {
bzero(ac, sizeof(*ac));
ac->ac_sc = sc;
error = bus_dmamap_create(sc->amr_buffer_dmat, 0, &ac->ac_dmamap);
if (error) {
free(ac, M_DEVBUF);
return(NULL);
}
}
}
bzero(&ac->ac_mailbox, sizeof(struct amr_mailbox));
return(ac);
}
/********************************************************************************
* Release a command buffer for recycling.
*
* XXX It might be a good idea to limit the number of commands we save for reuse
* if it's shown that this list bloats out massively.
*/
static void
amr_releasecmd(struct amr_command *ac)
{
int s;
debug("called");
s = splbio();
TAILQ_INSERT_HEAD(&ac->ac_sc->amr_freecmds, ac, ac_link);
splx(s);
}
/********************************************************************************
* Permanently discard a command buffer.
*/
static void
amr_freecmd(struct amr_command *ac)
{
struct amr_softc *sc = ac->ac_sc;
debug("called");
bus_dmamap_destroy(sc->amr_buffer_dmat, ac->ac_dmamap);
free(ac, M_DEVBUF);
}
/********************************************************************************
********************************************************************************
Interface-specific Shims
********************************************************************************
********************************************************************************/
/********************************************************************************
* Tell the controller that the mailbox contains a valid command
*/
static void
amr_quartz_submit_command(struct amr_softc *sc)
{
debug("called");
sc->amr_mailbox->mb_poll = 0;
sc->amr_mailbox->mb_ack = 0;
/* XXX write barrier? */
while(AMR_QGET_IDB(sc) & AMR_QIDB_SUBMIT)
; /* XXX aiee! what if it dies? */
AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_SUBMIT);
}
static void
amr_std_submit_command(struct amr_softc *sc)
{
debug("called");
/* XXX write barrier? */
while (AMR_SGET_MBSTAT(sc) & AMR_SMBOX_BUSYFLAG)
; /* XXX aiee! what if it dies? */
AMR_SPOST_COMMAND(sc);
}
/********************************************************************************
* Claim any work that the controller has completed; acknowledge completion,
* save details of the completion in (mbsave)
*/
static int
amr_quartz_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave)
{
int s, worked;
u_int32_t outd;
debug("called");
worked = 0;
s = splbio();
/* work waiting for us? */
if ((outd = AMR_QGET_ODB(sc)) == AMR_QODB_READY) {
AMR_QPUT_ODB(sc, AMR_QODB_READY);
/* save mailbox, which contains a list of completed commands */
/* XXX read barrier? */
bcopy(sc->amr_mailbox, mbsave, sizeof(*mbsave));
/* acknowledge that we have the commands */
AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_ACK);
while(AMR_QGET_IDB(sc) & AMR_QIDB_ACK)
; /* XXX aiee! what if it dies? */
worked = 1; /* got some work */
}
splx(s);
return(worked);
}
static int
amr_std_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave)
{
int s, worked;
u_int8_t istat;
debug("called");
worked = 0;
s = splbio();
/* check for valid interrupt status */
istat = AMR_SGET_ISTAT(sc);
if ((istat & AMR_SINTR_VALID) != 0) {
AMR_SPUT_ISTAT(sc, istat); /* ack interrupt status */
/* save mailbox, which contains a list of completed commands */
/* XXX read barrier? */
bcopy(sc->amr_mailbox, mbsave, sizeof(*mbsave));
AMR_SACK_INTERRUPT(sc); /* acknowledge we have the mailbox */
worked = 1;
}
splx(s);
return(worked);
}
/********************************************************************************
* Notify the controller of the mailbox location.
*/
static void
amr_quartz_attach_mailbox(struct amr_softc *sc)
{
/* Quartz is given the mailbox location when a command is submitted */
}
static void
amr_std_attach_mailbox(struct amr_softc *sc)
{
/* program the mailbox physical address */
AMR_SBYTE_SET(sc, AMR_SMBOX_0, sc->amr_mailboxphys & 0xff);
AMR_SBYTE_SET(sc, AMR_SMBOX_1, (sc->amr_mailboxphys >> 8) & 0xff);
AMR_SBYTE_SET(sc, AMR_SMBOX_2, (sc->amr_mailboxphys >> 16) & 0xff);
AMR_SBYTE_SET(sc, AMR_SMBOX_3, (sc->amr_mailboxphys >> 24) & 0xff);
AMR_SBYTE_SET(sc, AMR_SMBOX_ENABLE, AMR_SMBOX_ADDR);
/* clear any outstanding interrupt and enable interrupts proper */
AMR_SACK_INTERRUPT(sc);
AMR_SENABLE_INTR(sc);
}
/********************************************************************************
********************************************************************************
Debugging
********************************************************************************
********************************************************************************/
/********************************************************************************
* Print the command (ac) in human-readable format
*/
static void
amr_printcommand(struct amr_command *ac)
{
struct amr_softc *sc = ac->ac_sc;
struct amr_sgentry *sg;
int i;
device_printf(sc->amr_dev, "cmd %x ident %d drive %d\n",
ac->ac_mailbox.mb_command, ac->ac_mailbox.mb_ident, ac->ac_mailbox.mb_drive);
device_printf(sc->amr_dev, "blkcount %d lba %d\n",
ac->ac_mailbox.mb_blkcount, ac->ac_mailbox.mb_lba);
device_printf(sc->amr_dev, "virtaddr %p length %lu\n", ac->ac_data, (unsigned long)ac->ac_length);
device_printf(sc->amr_dev, "physaddr %08x nsg %d\n",
ac->ac_mailbox.mb_physaddr, ac->ac_mailbox.mb_nsgelem);
/* get base address of s/g table */
sg = sc->amr_sgtable + (ac->ac_slot * AMR_NSEG);
for (i = 0; i < ac->ac_mailbox.mb_nsgelem; i++, sg++)
device_printf(sc->amr_dev, " %x/%d\n", sg->sg_addr, sg->sg_count);
}