2047 lines
52 KiB
C
2047 lines
52 KiB
C
/*
|
|
* Low level routines for the Advanced Systems Inc. SCSI controllers chips
|
|
*
|
|
* Copyright (c) 1996-1997 Justin Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
/*
|
|
* Ported from:
|
|
* advansys.c - Linux Host Driver for AdvanSys SCSI Adapters
|
|
*
|
|
* Copyright (c) 1995-1996 Advanced System Products, Inc.
|
|
* All Rights Reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that redistributions of source
|
|
* code retain the above copyright notice and this comment without
|
|
* modification.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/clock.h>
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_sim.h>
|
|
#include <cam/cam_xpt_sim.h>
|
|
|
|
#include <cam/scsi/scsi_all.h>
|
|
#include <cam/scsi/scsi_message.h>
|
|
#include <cam/scsi/scsi_da.h>
|
|
#include <cam/scsi/scsi_cd.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/pmap.h>
|
|
|
|
#include <dev/advansys/advansys.h>
|
|
#include <dev/advansys/advmcode.h>
|
|
|
|
struct adv_quirk_entry {
|
|
struct scsi_inquiry_pattern inq_pat;
|
|
u_int8_t quirks;
|
|
#define ADV_QUIRK_FIX_ASYN_XFER_ALWAYS 0x01
|
|
#define ADV_QUIRK_FIX_ASYN_XFER 0x02
|
|
};
|
|
|
|
static struct adv_quirk_entry adv_quirk_table[] =
|
|
{
|
|
{
|
|
{ T_CDROM, SIP_MEDIA_REMOVABLE, "HP", "*", "*" },
|
|
ADV_QUIRK_FIX_ASYN_XFER_ALWAYS|ADV_QUIRK_FIX_ASYN_XFER
|
|
},
|
|
{
|
|
{ T_CDROM, SIP_MEDIA_REMOVABLE, "NEC", "CD-ROM DRIVE", "*" },
|
|
0
|
|
},
|
|
{
|
|
{
|
|
T_SEQUENTIAL, SIP_MEDIA_REMOVABLE,
|
|
"TANDBERG", " TDC 36", "*"
|
|
},
|
|
0
|
|
},
|
|
{
|
|
{ T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "WANGTEK", "*", "*" },
|
|
0
|
|
},
|
|
{
|
|
{
|
|
T_PROCESSOR, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED,
|
|
"*", "*", "*"
|
|
},
|
|
0
|
|
},
|
|
{
|
|
{
|
|
T_SCANNER, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED,
|
|
"*", "*", "*"
|
|
},
|
|
0
|
|
},
|
|
{
|
|
/* Default quirk entry */
|
|
{
|
|
T_ANY, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED,
|
|
/*vendor*/"*", /*product*/"*", /*revision*/"*"
|
|
},
|
|
ADV_QUIRK_FIX_ASYN_XFER,
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Allowable periods in ns
|
|
*/
|
|
static u_int8_t adv_sdtr_period_tbl[] =
|
|
{
|
|
25,
|
|
30,
|
|
35,
|
|
40,
|
|
50,
|
|
60,
|
|
70,
|
|
85
|
|
};
|
|
|
|
static u_int8_t adv_sdtr_period_tbl_ultra[] =
|
|
{
|
|
12,
|
|
19,
|
|
25,
|
|
32,
|
|
38,
|
|
44,
|
|
50,
|
|
57,
|
|
63,
|
|
69,
|
|
75,
|
|
82,
|
|
88,
|
|
94,
|
|
100,
|
|
107
|
|
};
|
|
|
|
struct ext_msg {
|
|
u_int8_t msg_type;
|
|
u_int8_t msg_len;
|
|
u_int8_t msg_req;
|
|
union {
|
|
struct {
|
|
u_int8_t sdtr_xfer_period;
|
|
u_int8_t sdtr_req_ack_offset;
|
|
} sdtr;
|
|
struct {
|
|
u_int8_t wdtr_width;
|
|
} wdtr;
|
|
struct {
|
|
u_int8_t mdp[4];
|
|
} mdp;
|
|
} u_ext_msg;
|
|
u_int8_t res;
|
|
};
|
|
|
|
#define xfer_period u_ext_msg.sdtr.sdtr_xfer_period
|
|
#define req_ack_offset u_ext_msg.sdtr.sdtr_req_ack_offset
|
|
#define wdtr_width u_ext_msg.wdtr.wdtr_width
|
|
#define mdp_b3 u_ext_msg.mdp_b3
|
|
#define mdp_b2 u_ext_msg.mdp_b2
|
|
#define mdp_b1 u_ext_msg.mdp_b1
|
|
#define mdp_b0 u_ext_msg.mdp_b0
|
|
|
|
/*
|
|
* Some of the early PCI adapters have problems with
|
|
* async transfers. Instead use an offset of 1.
|
|
*/
|
|
#define ASYN_SDTR_DATA_FIX_PCI_REV_AB 0x41
|
|
|
|
/* LRAM routines */
|
|
static void adv_read_lram_16_multi(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t *buffer, int count);
|
|
static void adv_write_lram_16_multi(struct adv_softc *adv,
|
|
u_int16_t s_addr, u_int16_t *buffer,
|
|
int count);
|
|
static void adv_mset_lram_16(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t set_value, int count);
|
|
static u_int32_t adv_msum_lram_16(struct adv_softc *adv, u_int16_t s_addr,
|
|
int count);
|
|
|
|
static int adv_write_and_verify_lram_16(struct adv_softc *adv,
|
|
u_int16_t addr, u_int16_t value);
|
|
static u_int32_t adv_read_lram_32(struct adv_softc *adv, u_int16_t addr);
|
|
|
|
|
|
static void adv_write_lram_32(struct adv_softc *adv, u_int16_t addr,
|
|
u_int32_t value);
|
|
static void adv_write_lram_32_multi(struct adv_softc *adv,
|
|
u_int16_t s_addr, u_int32_t *buffer,
|
|
int count);
|
|
|
|
/* EEPROM routines */
|
|
static u_int16_t adv_read_eeprom_16(struct adv_softc *adv, u_int8_t addr);
|
|
static u_int16_t adv_write_eeprom_16(struct adv_softc *adv, u_int8_t addr,
|
|
u_int16_t value);
|
|
static int adv_write_eeprom_cmd_reg(struct adv_softc *adv,
|
|
u_int8_t cmd_reg);
|
|
static int adv_set_eeprom_config_once(struct adv_softc *adv,
|
|
struct adv_eeprom_config *eeconfig);
|
|
|
|
/* Initialization */
|
|
static u_int32_t adv_load_microcode(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t *mcode_buf, u_int16_t mcode_size);
|
|
|
|
static void adv_reinit_lram(struct adv_softc *adv);
|
|
static void adv_init_lram(struct adv_softc *adv);
|
|
static int adv_init_microcode_var(struct adv_softc *adv);
|
|
static void adv_init_qlink_var(struct adv_softc *adv);
|
|
|
|
/* Interrupts */
|
|
static void adv_disable_interrupt(struct adv_softc *adv);
|
|
static void adv_enable_interrupt(struct adv_softc *adv);
|
|
static void adv_toggle_irq_act(struct adv_softc *adv);
|
|
|
|
/* Chip Control */
|
|
static int adv_stop_chip(struct adv_softc *adv);
|
|
static int adv_host_req_chip_halt(struct adv_softc *adv);
|
|
static void adv_set_chip_ih(struct adv_softc *adv, u_int16_t ins_code);
|
|
#if UNUSED
|
|
static u_int8_t adv_get_chip_scsi_ctrl(struct adv_softc *adv);
|
|
#endif
|
|
|
|
/* Queue handling and execution */
|
|
static __inline int
|
|
adv_sgcount_to_qcount(int sgcount);
|
|
|
|
static __inline int
|
|
adv_sgcount_to_qcount(int sgcount)
|
|
{
|
|
int n_sg_list_qs;
|
|
|
|
n_sg_list_qs = ((sgcount - 1) / ADV_SG_LIST_PER_Q);
|
|
if (((sgcount - 1) % ADV_SG_LIST_PER_Q) != 0)
|
|
n_sg_list_qs++;
|
|
return (n_sg_list_qs + 1);
|
|
}
|
|
|
|
static void adv_get_q_info(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t *inbuf, int words);
|
|
static u_int adv_get_num_free_queues(struct adv_softc *adv, u_int8_t n_qs);
|
|
static u_int8_t adv_alloc_free_queues(struct adv_softc *adv,
|
|
u_int8_t free_q_head, u_int8_t n_free_q);
|
|
static u_int8_t adv_alloc_free_queue(struct adv_softc *adv,
|
|
u_int8_t free_q_head);
|
|
static int adv_send_scsi_queue(struct adv_softc *adv,
|
|
struct adv_scsi_q *scsiq,
|
|
u_int8_t n_q_required);
|
|
static void adv_put_ready_sg_list_queue(struct adv_softc *adv,
|
|
struct adv_scsi_q *scsiq,
|
|
u_int q_no);
|
|
static void adv_put_ready_queue(struct adv_softc *adv,
|
|
struct adv_scsi_q *scsiq, u_int q_no);
|
|
static void adv_put_scsiq(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t *buffer, int words);
|
|
|
|
/* Messages */
|
|
static void adv_handle_extmsg_in(struct adv_softc *adv,
|
|
u_int16_t halt_q_addr, u_int8_t q_cntl,
|
|
target_bit_vector target_id,
|
|
int tid);
|
|
static void adv_msgout_sdtr(struct adv_softc *adv, u_int8_t sdtr_period,
|
|
u_int8_t sdtr_offset);
|
|
static void adv_set_sdtr_reg_at_id(struct adv_softc *adv, int id,
|
|
u_int8_t sdtr_data);
|
|
|
|
|
|
/* Exported functions first */
|
|
|
|
void
|
|
advasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg)
|
|
{
|
|
struct adv_softc *adv;
|
|
|
|
adv = (struct adv_softc *)callback_arg;
|
|
switch (code) {
|
|
case AC_FOUND_DEVICE:
|
|
{
|
|
struct ccb_getdev *cgd;
|
|
target_bit_vector target_mask;
|
|
int num_entries;
|
|
caddr_t match;
|
|
struct adv_quirk_entry *entry;
|
|
struct adv_target_transinfo* tinfo;
|
|
|
|
cgd = (struct ccb_getdev *)arg;
|
|
|
|
target_mask = ADV_TID_TO_TARGET_MASK(cgd->ccb_h.target_id);
|
|
|
|
num_entries = sizeof(adv_quirk_table)/sizeof(*adv_quirk_table);
|
|
match = cam_quirkmatch((caddr_t)&cgd->inq_data,
|
|
(caddr_t)adv_quirk_table,
|
|
num_entries, sizeof(*adv_quirk_table),
|
|
scsi_inquiry_match);
|
|
|
|
if (match == NULL)
|
|
panic("advasync: device didn't match wildcard entry!!");
|
|
|
|
entry = (struct adv_quirk_entry *)match;
|
|
|
|
if (adv->bug_fix_control & ADV_BUG_FIX_ASYN_USE_SYN) {
|
|
if ((entry->quirks & ADV_QUIRK_FIX_ASYN_XFER_ALWAYS)!=0)
|
|
adv->fix_asyn_xfer_always |= target_mask;
|
|
else
|
|
adv->fix_asyn_xfer_always &= ~target_mask;
|
|
/*
|
|
* We start out life with all bits set and clear them
|
|
* after we've determined that the fix isn't necessary.
|
|
* It may well be that we've already cleared a target
|
|
* before the full inquiry session completes, so don't
|
|
* gratuitously set a target bit even if it has this
|
|
* quirk. But, if the quirk exonerates a device, clear
|
|
* the bit now.
|
|
*/
|
|
if ((entry->quirks & ADV_QUIRK_FIX_ASYN_XFER) == 0)
|
|
adv->fix_asyn_xfer &= ~target_mask;
|
|
}
|
|
/*
|
|
* Reset our sync settings now that we've determined
|
|
* what quirks are in effect for the device.
|
|
*/
|
|
tinfo = &adv->tinfo[cgd->ccb_h.target_id];
|
|
adv_set_syncrate(adv, cgd->ccb_h.path,
|
|
cgd->ccb_h.target_id,
|
|
tinfo->current.period,
|
|
tinfo->current.offset,
|
|
ADV_TRANS_CUR);
|
|
break;
|
|
}
|
|
case AC_LOST_DEVICE:
|
|
{
|
|
u_int target_mask;
|
|
|
|
if (adv->bug_fix_control & ADV_BUG_FIX_ASYN_USE_SYN) {
|
|
target_mask = 0x01 << xpt_path_target_id(path);
|
|
adv->fix_asyn_xfer |= target_mask;
|
|
}
|
|
|
|
/*
|
|
* Revert to async transfers
|
|
* for the next device.
|
|
*/
|
|
adv_set_syncrate(adv, /*path*/NULL,
|
|
xpt_path_target_id(path),
|
|
/*period*/0,
|
|
/*offset*/0,
|
|
ADV_TRANS_GOAL|ADV_TRANS_CUR);
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void
|
|
adv_set_bank(struct adv_softc *adv, u_int8_t bank)
|
|
{
|
|
u_int8_t control;
|
|
|
|
/*
|
|
* Start out with the bank reset to 0
|
|
*/
|
|
control = ADV_INB(adv, ADV_CHIP_CTRL)
|
|
& (~(ADV_CC_SINGLE_STEP | ADV_CC_TEST
|
|
| ADV_CC_DIAG | ADV_CC_SCSI_RESET
|
|
| ADV_CC_CHIP_RESET | ADV_CC_BANK_ONE));
|
|
if (bank == 1) {
|
|
control |= ADV_CC_BANK_ONE;
|
|
} else if (bank == 2) {
|
|
control |= ADV_CC_DIAG | ADV_CC_BANK_ONE;
|
|
}
|
|
ADV_OUTB(adv, ADV_CHIP_CTRL, control);
|
|
}
|
|
|
|
u_int8_t
|
|
adv_read_lram_8(struct adv_softc *adv, u_int16_t addr)
|
|
{
|
|
u_int8_t byte_data;
|
|
u_int16_t word_data;
|
|
|
|
/*
|
|
* LRAM is accessed on 16bit boundaries.
|
|
*/
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, addr & 0xFFFE);
|
|
word_data = ADV_INW(adv, ADV_LRAM_DATA);
|
|
if (addr & 1) {
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
byte_data = (u_int8_t)(word_data & 0xFF);
|
|
#else
|
|
byte_data = (u_int8_t)((word_data >> 8) & 0xFF);
|
|
#endif
|
|
} else {
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
byte_data = (u_int8_t)((word_data >> 8) & 0xFF);
|
|
#else
|
|
byte_data = (u_int8_t)(word_data & 0xFF);
|
|
#endif
|
|
}
|
|
return (byte_data);
|
|
}
|
|
|
|
void
|
|
adv_write_lram_8(struct adv_softc *adv, u_int16_t addr, u_int8_t value)
|
|
{
|
|
u_int16_t word_data;
|
|
|
|
word_data = adv_read_lram_16(adv, addr & 0xFFFE);
|
|
if (addr & 1) {
|
|
word_data &= 0x00FF;
|
|
word_data |= (((u_int8_t)value << 8) & 0xFF00);
|
|
} else {
|
|
word_data &= 0xFF00;
|
|
word_data |= ((u_int8_t)value & 0x00FF);
|
|
}
|
|
adv_write_lram_16(adv, addr & 0xFFFE, word_data);
|
|
}
|
|
|
|
|
|
u_int16_t
|
|
adv_read_lram_16(struct adv_softc *adv, u_int16_t addr)
|
|
{
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, addr);
|
|
return (ADV_INW(adv, ADV_LRAM_DATA));
|
|
}
|
|
|
|
void
|
|
adv_write_lram_16(struct adv_softc *adv, u_int16_t addr, u_int16_t value)
|
|
{
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, addr);
|
|
ADV_OUTW(adv, ADV_LRAM_DATA, value);
|
|
}
|
|
|
|
/*
|
|
* Determine if there is a board at "iobase" by looking
|
|
* for the AdvanSys signatures. Return 1 if a board is
|
|
* found, 0 otherwise.
|
|
*/
|
|
int
|
|
adv_find_signature(bus_space_tag_t tag, bus_space_handle_t bsh)
|
|
{
|
|
u_int16_t signature;
|
|
|
|
if (bus_space_read_1(tag, bsh, ADV_SIGNATURE_BYTE) == ADV_1000_ID1B) {
|
|
signature = bus_space_read_2(tag, bsh, ADV_SIGNATURE_WORD);
|
|
if ((signature == ADV_1000_ID0W)
|
|
|| (signature == ADV_1000_ID0W_FIX))
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
adv_lib_init(struct adv_softc *adv)
|
|
{
|
|
if ((adv->type & ADV_ULTRA) != 0) {
|
|
adv->sdtr_period_tbl = adv_sdtr_period_tbl_ultra;
|
|
adv->sdtr_period_tbl_size = sizeof(adv_sdtr_period_tbl_ultra);
|
|
} else {
|
|
adv->sdtr_period_tbl = adv_sdtr_period_tbl;
|
|
adv->sdtr_period_tbl_size = sizeof(adv_sdtr_period_tbl);
|
|
}
|
|
}
|
|
|
|
u_int16_t
|
|
adv_get_eeprom_config(struct adv_softc *adv, struct
|
|
adv_eeprom_config *eeprom_config)
|
|
{
|
|
u_int16_t sum;
|
|
u_int16_t *wbuf;
|
|
u_int8_t cfg_beg;
|
|
u_int8_t cfg_end;
|
|
u_int8_t s_addr;
|
|
|
|
wbuf = (u_int16_t *)eeprom_config;
|
|
sum = 0;
|
|
|
|
for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) {
|
|
*wbuf = adv_read_eeprom_16(adv, s_addr);
|
|
sum += *wbuf;
|
|
}
|
|
|
|
if (adv->type & ADV_VL) {
|
|
cfg_beg = ADV_EEPROM_CFG_BEG_VL;
|
|
cfg_end = ADV_EEPROM_MAX_ADDR_VL;
|
|
} else {
|
|
cfg_beg = ADV_EEPROM_CFG_BEG;
|
|
cfg_end = ADV_EEPROM_MAX_ADDR;
|
|
}
|
|
|
|
for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) {
|
|
*wbuf = adv_read_eeprom_16(adv, s_addr);
|
|
sum += *wbuf;
|
|
#if ADV_DEBUG_EEPROM
|
|
printf("Addr 0x%x: 0x%04x\n", s_addr, *wbuf);
|
|
#endif
|
|
}
|
|
*wbuf = adv_read_eeprom_16(adv, s_addr);
|
|
return (sum);
|
|
}
|
|
|
|
int
|
|
adv_set_eeprom_config(struct adv_softc *adv,
|
|
struct adv_eeprom_config *eeprom_config)
|
|
{
|
|
int retry;
|
|
|
|
retry = 0;
|
|
while (1) {
|
|
if (adv_set_eeprom_config_once(adv, eeprom_config) == 0) {
|
|
break;
|
|
}
|
|
if (++retry > ADV_EEPROM_MAX_RETRY) {
|
|
break;
|
|
}
|
|
}
|
|
return (retry > ADV_EEPROM_MAX_RETRY);
|
|
}
|
|
|
|
int
|
|
adv_reset_chip_and_scsi_bus(struct adv_softc *adv)
|
|
{
|
|
adv_stop_chip(adv);
|
|
ADV_OUTB(adv, ADV_CHIP_CTRL,
|
|
ADV_CC_CHIP_RESET | ADV_CC_SCSI_RESET | ADV_CC_HALT);
|
|
DELAY(200 * 1000);
|
|
|
|
adv_set_chip_ih(adv, ADV_INS_RFLAG_WTM);
|
|
adv_set_chip_ih(adv, ADV_INS_HALT);
|
|
|
|
ADV_OUTB(adv, ADV_CHIP_CTRL, ADV_CC_CHIP_RESET | ADV_CC_HALT);
|
|
ADV_OUTB(adv, ADV_CHIP_CTRL, ADV_CC_HALT);
|
|
DELAY(200 * 1000);
|
|
return (adv_is_chip_halted(adv));
|
|
}
|
|
|
|
int
|
|
adv_test_external_lram(struct adv_softc* adv)
|
|
{
|
|
u_int16_t q_addr;
|
|
u_int16_t saved_value;
|
|
int success;
|
|
|
|
success = 0;
|
|
|
|
q_addr = ADV_QNO_TO_QADDR(241);
|
|
saved_value = adv_read_lram_16(adv, q_addr);
|
|
if (adv_write_and_verify_lram_16(adv, q_addr, 0x55AA) == 0) {
|
|
success = 1;
|
|
adv_write_lram_16(adv, q_addr, saved_value);
|
|
}
|
|
return (success);
|
|
}
|
|
|
|
|
|
int
|
|
adv_init_lram_and_mcode(struct adv_softc *adv)
|
|
{
|
|
u_int32_t retval;
|
|
|
|
adv_disable_interrupt(adv);
|
|
|
|
adv_init_lram(adv);
|
|
|
|
retval = adv_load_microcode(adv, 0, (u_int16_t *)adv_mcode,
|
|
adv_mcode_size);
|
|
if (retval != adv_mcode_chksum) {
|
|
printf("adv%d: Microcode download failed checksum!\n",
|
|
adv->unit);
|
|
return (1);
|
|
}
|
|
|
|
if (adv_init_microcode_var(adv) != 0)
|
|
return (1);
|
|
|
|
adv_enable_interrupt(adv);
|
|
return (0);
|
|
}
|
|
|
|
u_int8_t
|
|
adv_get_chip_irq(struct adv_softc *adv)
|
|
{
|
|
u_int16_t cfg_lsw;
|
|
u_int8_t chip_irq;
|
|
|
|
cfg_lsw = ADV_INW(adv, ADV_CONFIG_LSW);
|
|
|
|
if ((adv->type & ADV_VL) != 0) {
|
|
chip_irq = (u_int8_t)(((cfg_lsw >> 2) & 0x07));
|
|
if ((chip_irq == 0) ||
|
|
(chip_irq == 4) ||
|
|
(chip_irq == 7)) {
|
|
return (0);
|
|
}
|
|
return (chip_irq + (ADV_MIN_IRQ_NO - 1));
|
|
}
|
|
chip_irq = (u_int8_t)(((cfg_lsw >> 2) & 0x03));
|
|
if (chip_irq == 3)
|
|
chip_irq += 2;
|
|
return (chip_irq + ADV_MIN_IRQ_NO);
|
|
}
|
|
|
|
u_int8_t
|
|
adv_set_chip_irq(struct adv_softc *adv, u_int8_t irq_no)
|
|
{
|
|
u_int16_t cfg_lsw;
|
|
|
|
if ((adv->type & ADV_VL) != 0) {
|
|
if (irq_no != 0) {
|
|
if ((irq_no < ADV_MIN_IRQ_NO)
|
|
|| (irq_no > ADV_MAX_IRQ_NO)) {
|
|
irq_no = 0;
|
|
} else {
|
|
irq_no -= ADV_MIN_IRQ_NO - 1;
|
|
}
|
|
}
|
|
cfg_lsw = ADV_INW(adv, ADV_CONFIG_LSW) & 0xFFE3;
|
|
cfg_lsw |= 0x0010;
|
|
ADV_OUTW(adv, ADV_CONFIG_LSW, cfg_lsw);
|
|
adv_toggle_irq_act(adv);
|
|
|
|
cfg_lsw = ADV_INW(adv, ADV_CONFIG_LSW) & 0xFFE0;
|
|
cfg_lsw |= (irq_no & 0x07) << 2;
|
|
ADV_OUTW(adv, ADV_CONFIG_LSW, cfg_lsw);
|
|
adv_toggle_irq_act(adv);
|
|
} else if ((adv->type & ADV_ISA) != 0) {
|
|
if (irq_no == 15)
|
|
irq_no -= 2;
|
|
irq_no -= ADV_MIN_IRQ_NO;
|
|
cfg_lsw = ADV_INW(adv, ADV_CONFIG_LSW) & 0xFFF3;
|
|
cfg_lsw |= (irq_no & 0x03) << 2;
|
|
ADV_OUTW(adv, ADV_CONFIG_LSW, cfg_lsw);
|
|
}
|
|
return (adv_get_chip_irq(adv));
|
|
}
|
|
|
|
void
|
|
adv_set_chip_scsiid(struct adv_softc *adv, int new_id)
|
|
{
|
|
u_int16_t cfg_lsw;
|
|
|
|
cfg_lsw = ADV_INW(adv, ADV_CONFIG_LSW);
|
|
if (ADV_CONFIG_SCSIID(cfg_lsw) == new_id)
|
|
return;
|
|
cfg_lsw &= ~ADV_CFG_LSW_SCSIID;
|
|
cfg_lsw |= (new_id & ADV_MAX_TID) << ADV_CFG_LSW_SCSIID_SHIFT;
|
|
ADV_OUTW(adv, ADV_CONFIG_LSW, cfg_lsw);
|
|
}
|
|
|
|
int
|
|
adv_execute_scsi_queue(struct adv_softc *adv, struct adv_scsi_q *scsiq,
|
|
u_int32_t datalen)
|
|
{
|
|
struct adv_target_transinfo* tinfo;
|
|
u_int32_t *p_data_addr;
|
|
u_int32_t *p_data_bcount;
|
|
int disable_syn_offset_one_fix;
|
|
int retval;
|
|
u_int n_q_required;
|
|
u_int32_t addr;
|
|
u_int8_t sg_entry_cnt;
|
|
u_int8_t target_ix;
|
|
u_int8_t sg_entry_cnt_minus_one;
|
|
u_int8_t tid_no;
|
|
|
|
scsiq->q1.q_no = 0;
|
|
retval = 1; /* Default to error case */
|
|
target_ix = scsiq->q2.target_ix;
|
|
tid_no = ADV_TIX_TO_TID(target_ix);
|
|
tinfo = &adv->tinfo[tid_no];
|
|
|
|
if (scsiq->cdbptr[0] == REQUEST_SENSE) {
|
|
/* Renegotiate if appropriate. */
|
|
adv_set_syncrate(adv, /*struct cam_path */NULL,
|
|
tid_no, /*period*/0, /*offset*/0,
|
|
ADV_TRANS_CUR);
|
|
if (tinfo->current.period != tinfo->goal.period) {
|
|
adv_msgout_sdtr(adv, tinfo->goal.period,
|
|
tinfo->goal.offset);
|
|
scsiq->q1.cntl |= (QC_MSG_OUT | QC_URGENT);
|
|
}
|
|
}
|
|
|
|
if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) {
|
|
sg_entry_cnt = scsiq->sg_head->entry_cnt;
|
|
sg_entry_cnt_minus_one = sg_entry_cnt - 1;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sg_entry_cnt <= 1)
|
|
panic("adv_execute_scsi_queue: Queue "
|
|
"with QC_SG_HEAD set but %d segs.", sg_entry_cnt);
|
|
|
|
if (sg_entry_cnt > ADV_MAX_SG_LIST)
|
|
panic("adv_execute_scsi_queue: "
|
|
"Queue with too many segs.");
|
|
|
|
if (adv->type & (ADV_ISA | ADV_VL | ADV_EISA)) {
|
|
int i;
|
|
|
|
for (i = 0; i < sg_entry_cnt_minus_one; i++) {
|
|
addr = scsiq->sg_head->sg_list[i].addr +
|
|
scsiq->sg_head->sg_list[i].bytes;
|
|
|
|
if ((addr & 0x0003) != 0)
|
|
panic("adv_execute_scsi_queue: SG "
|
|
"with odd address or byte count");
|
|
}
|
|
}
|
|
#endif
|
|
p_data_addr =
|
|
&scsiq->sg_head->sg_list[sg_entry_cnt_minus_one].addr;
|
|
p_data_bcount =
|
|
&scsiq->sg_head->sg_list[sg_entry_cnt_minus_one].bytes;
|
|
|
|
n_q_required = adv_sgcount_to_qcount(sg_entry_cnt);
|
|
scsiq->sg_head->queue_cnt = n_q_required - 1;
|
|
} else {
|
|
p_data_addr = &scsiq->q1.data_addr;
|
|
p_data_bcount = &scsiq->q1.data_cnt;
|
|
n_q_required = 1;
|
|
}
|
|
|
|
disable_syn_offset_one_fix = FALSE;
|
|
|
|
if ((adv->fix_asyn_xfer & scsiq->q1.target_id) != 0
|
|
&& (adv->fix_asyn_xfer_always & scsiq->q1.target_id) == 0) {
|
|
|
|
if (datalen != 0) {
|
|
if (datalen < 512) {
|
|
disable_syn_offset_one_fix = TRUE;
|
|
} else {
|
|
if (scsiq->cdbptr[0] == INQUIRY
|
|
|| scsiq->cdbptr[0] == REQUEST_SENSE
|
|
|| scsiq->cdbptr[0] == READ_CAPACITY
|
|
|| scsiq->cdbptr[0] == MODE_SELECT_6
|
|
|| scsiq->cdbptr[0] == MODE_SENSE_6
|
|
|| scsiq->cdbptr[0] == MODE_SENSE_10
|
|
|| scsiq->cdbptr[0] == MODE_SELECT_10
|
|
|| scsiq->cdbptr[0] == READ_TOC) {
|
|
disable_syn_offset_one_fix = TRUE;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (disable_syn_offset_one_fix) {
|
|
scsiq->q2.tag_code &=
|
|
~(MSG_SIMPLE_Q_TAG|MSG_HEAD_OF_Q_TAG|MSG_ORDERED_Q_TAG);
|
|
scsiq->q2.tag_code |= (ADV_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX
|
|
| ADV_TAG_FLAG_DISABLE_DISCONNECT);
|
|
}
|
|
|
|
if ((adv->bug_fix_control & ADV_BUG_FIX_IF_NOT_DWB) != 0
|
|
&& (scsiq->cdbptr[0] == READ_10 || scsiq->cdbptr[0] == READ_6)) {
|
|
u_int8_t extra_bytes;
|
|
|
|
addr = *p_data_addr + *p_data_bcount;
|
|
extra_bytes = addr & 0x0003;
|
|
if (extra_bytes != 0
|
|
&& ((scsiq->q1.cntl & QC_SG_HEAD) != 0
|
|
|| (scsiq->q1.data_cnt & 0x01FF) == 0)) {
|
|
scsiq->q2.tag_code |= ADV_TAG_FLAG_EXTRA_BYTES;
|
|
scsiq->q1.extra_bytes = extra_bytes;
|
|
*p_data_bcount -= extra_bytes;
|
|
}
|
|
}
|
|
|
|
if ((adv_get_num_free_queues(adv, n_q_required) >= n_q_required)
|
|
|| ((scsiq->q1.cntl & QC_URGENT) != 0))
|
|
retval = adv_send_scsi_queue(adv, scsiq, n_q_required);
|
|
|
|
return (retval);
|
|
}
|
|
|
|
|
|
u_int8_t
|
|
adv_copy_lram_doneq(struct adv_softc *adv, u_int16_t q_addr,
|
|
struct adv_q_done_info *scsiq, u_int32_t max_dma_count)
|
|
{
|
|
u_int16_t val;
|
|
u_int8_t sg_queue_cnt;
|
|
|
|
adv_get_q_info(adv, q_addr + ADV_SCSIQ_DONE_INFO_BEG,
|
|
(u_int16_t *)scsiq,
|
|
(sizeof(scsiq->d2) + sizeof(scsiq->d3)) / 2);
|
|
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
adv_adj_endian_qdone_info(scsiq);
|
|
#endif
|
|
|
|
val = adv_read_lram_16(adv, q_addr + ADV_SCSIQ_B_STATUS);
|
|
scsiq->q_status = val & 0xFF;
|
|
scsiq->q_no = (val >> 8) & 0XFF;
|
|
|
|
val = adv_read_lram_16(adv, q_addr + ADV_SCSIQ_B_CNTL);
|
|
scsiq->cntl = val & 0xFF;
|
|
sg_queue_cnt = (val >> 8) & 0xFF;
|
|
|
|
val = adv_read_lram_16(adv,q_addr + ADV_SCSIQ_B_SENSE_LEN);
|
|
scsiq->sense_len = val & 0xFF;
|
|
scsiq->extra_bytes = (val >> 8) & 0xFF;
|
|
|
|
/*
|
|
* XXX
|
|
* Due to a bug in accessing LRAM on the 940UA, we only pull
|
|
* the low 16bits of residual information. In the future, we'll
|
|
* want to allow transfers larger than 64K, but hopefully we'll
|
|
* get a new firmware revision from AdvanSys that address this
|
|
* problem before we up the transfer size.
|
|
*/
|
|
scsiq->remain_bytes =
|
|
adv_read_lram_16(adv, q_addr + ADV_SCSIQ_DW_REMAIN_XFER_CNT);
|
|
/*
|
|
* XXX Is this just a safeguard or will the counter really
|
|
* have bogus upper bits?
|
|
*/
|
|
scsiq->remain_bytes &= max_dma_count;
|
|
|
|
return (sg_queue_cnt);
|
|
}
|
|
|
|
int
|
|
adv_start_chip(struct adv_softc *adv)
|
|
{
|
|
ADV_OUTB(adv, ADV_CHIP_CTRL, 0);
|
|
if ((ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_HALTED) != 0)
|
|
return (0);
|
|
return (1);
|
|
}
|
|
|
|
int
|
|
adv_stop_execution(struct adv_softc *adv)
|
|
{
|
|
int count;
|
|
|
|
count = 0;
|
|
if (adv_read_lram_8(adv, ADV_STOP_CODE_B) == 0) {
|
|
adv_write_lram_8(adv, ADV_STOP_CODE_B,
|
|
ADV_STOP_REQ_RISC_STOP);
|
|
do {
|
|
if (adv_read_lram_8(adv, ADV_STOP_CODE_B) &
|
|
ADV_STOP_ACK_RISC_STOP) {
|
|
return (1);
|
|
}
|
|
DELAY(1000);
|
|
} while (count++ < 20);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
adv_is_chip_halted(struct adv_softc *adv)
|
|
{
|
|
if ((ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_HALTED) != 0) {
|
|
if ((ADV_INB(adv, ADV_CHIP_CTRL) & ADV_CC_HALT) != 0) {
|
|
return (1);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* XXX The numeric constants and the loops in this routine
|
|
* need to be documented.
|
|
*/
|
|
void
|
|
adv_ack_interrupt(struct adv_softc *adv)
|
|
{
|
|
u_int8_t host_flag;
|
|
u_int8_t risc_flag;
|
|
int loop;
|
|
|
|
loop = 0;
|
|
do {
|
|
risc_flag = adv_read_lram_8(adv, ADVV_RISC_FLAG_B);
|
|
if (loop++ > 0x7FFF) {
|
|
break;
|
|
}
|
|
} while ((risc_flag & ADV_RISC_FLAG_GEN_INT) != 0);
|
|
|
|
host_flag = adv_read_lram_8(adv, ADVV_HOST_FLAG_B);
|
|
adv_write_lram_8(adv, ADVV_HOST_FLAG_B,
|
|
host_flag | ADV_HOST_FLAG_ACK_INT);
|
|
|
|
ADV_OUTW(adv, ADV_CHIP_STATUS, ADV_CIW_INT_ACK);
|
|
loop = 0;
|
|
while (ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_INT_PENDING) {
|
|
ADV_OUTW(adv, ADV_CHIP_STATUS, ADV_CIW_INT_ACK);
|
|
if (loop++ > 3) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
adv_write_lram_8(adv, ADVV_HOST_FLAG_B, host_flag);
|
|
}
|
|
|
|
/*
|
|
* Handle all conditions that may halt the chip waiting
|
|
* for us to intervene.
|
|
*/
|
|
void
|
|
adv_isr_chip_halted(struct adv_softc *adv)
|
|
{
|
|
u_int16_t int_halt_code;
|
|
u_int16_t halt_q_addr;
|
|
target_bit_vector target_mask;
|
|
target_bit_vector scsi_busy;
|
|
u_int8_t halt_qp;
|
|
u_int8_t target_ix;
|
|
u_int8_t q_cntl;
|
|
u_int8_t tid_no;
|
|
|
|
int_halt_code = adv_read_lram_16(adv, ADVV_HALTCODE_W);
|
|
halt_qp = adv_read_lram_8(adv, ADVV_CURCDB_B);
|
|
halt_q_addr = ADV_QNO_TO_QADDR(halt_qp);
|
|
target_ix = adv_read_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_TARGET_IX);
|
|
q_cntl = adv_read_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_CNTL);
|
|
tid_no = ADV_TIX_TO_TID(target_ix);
|
|
target_mask = ADV_TID_TO_TARGET_MASK(tid_no);
|
|
if (int_halt_code == ADV_HALT_DISABLE_ASYN_USE_SYN_FIX) {
|
|
/*
|
|
* Temporarily disable the async fix by removing
|
|
* this target from the list of affected targets,
|
|
* setting our async rate, and then putting us
|
|
* back into the mask.
|
|
*/
|
|
adv->fix_asyn_xfer &= ~target_mask;
|
|
adv_set_syncrate(adv, /*struct cam_path */NULL,
|
|
tid_no, /*period*/0, /*offset*/0,
|
|
ADV_TRANS_ACTIVE);
|
|
adv->fix_asyn_xfer |= target_mask;
|
|
} else if (int_halt_code == ADV_HALT_ENABLE_ASYN_USE_SYN_FIX) {
|
|
adv_set_syncrate(adv, /*struct cam_path */NULL,
|
|
tid_no, /*period*/0, /*offset*/0,
|
|
ADV_TRANS_ACTIVE);
|
|
} else if (int_halt_code == ADV_HALT_EXTMSG_IN) {
|
|
adv_handle_extmsg_in(adv, halt_q_addr, q_cntl,
|
|
target_mask, tid_no);
|
|
} else if (int_halt_code == ADV_HALT_CHK_CONDITION) {
|
|
struct adv_target_transinfo* tinfo;
|
|
union ccb *ccb;
|
|
u_int8_t tag_code;
|
|
u_int8_t q_status;
|
|
|
|
tinfo = &adv->tinfo[tid_no];
|
|
q_cntl |= QC_REQ_SENSE;
|
|
|
|
/* Renegotiate if appropriate. */
|
|
adv_set_syncrate(adv, /*struct cam_path */NULL,
|
|
tid_no, /*period*/0, /*offset*/0,
|
|
ADV_TRANS_CUR);
|
|
if (tinfo->current.period != tinfo->goal.period) {
|
|
adv_msgout_sdtr(adv, tinfo->goal.period,
|
|
tinfo->goal.offset);
|
|
q_cntl |= QC_MSG_OUT;
|
|
}
|
|
adv_write_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_CNTL, q_cntl);
|
|
|
|
/* Don't tag request sense commands */
|
|
tag_code = adv_read_lram_8(adv,
|
|
halt_q_addr + ADV_SCSIQ_B_TAG_CODE);
|
|
tag_code &=
|
|
~(MSG_SIMPLE_Q_TAG|MSG_HEAD_OF_Q_TAG|MSG_ORDERED_Q_TAG);
|
|
|
|
if ((adv->fix_asyn_xfer & target_mask) != 0
|
|
&& (adv->fix_asyn_xfer_always & target_mask) == 0) {
|
|
tag_code |= (ADV_TAG_FLAG_DISABLE_DISCONNECT
|
|
| ADV_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX);
|
|
}
|
|
adv_write_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_TAG_CODE,
|
|
tag_code);
|
|
q_status = adv_read_lram_8(adv,
|
|
halt_q_addr + ADV_SCSIQ_B_STATUS);
|
|
q_status |= (QS_READY | QS_BUSY);
|
|
adv_write_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_STATUS,
|
|
q_status);
|
|
/*
|
|
* Freeze the devq until we can handle the sense condition.
|
|
*/
|
|
ccb = (union ccb *) adv_read_lram_32(adv, halt_q_addr
|
|
+ ADV_SCSIQ_D_CCBPTR);
|
|
xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
|
|
ccb->ccb_h.status |= CAM_DEV_QFRZN;
|
|
adv_abort_ccb(adv, tid_no, ADV_TIX_TO_LUN(target_ix),
|
|
/*ccb*/NULL, CAM_REQUEUE_REQ,
|
|
/*queued_only*/TRUE);
|
|
scsi_busy = adv_read_lram_8(adv, ADVV_SCSIBUSY_B);
|
|
scsi_busy &= ~target_mask;
|
|
adv_write_lram_8(adv, ADVV_SCSIBUSY_B, scsi_busy);
|
|
/*
|
|
* Ensure we have enough time to actually
|
|
* retrieve the sense.
|
|
*/
|
|
untimeout(adv_timeout, (caddr_t)ccb, ccb->ccb_h.timeout_ch);
|
|
ccb->ccb_h.timeout_ch =
|
|
timeout(adv_timeout, (caddr_t)ccb, 5 * hz);
|
|
} else if (int_halt_code == ADV_HALT_SDTR_REJECTED) {
|
|
struct ext_msg out_msg;
|
|
|
|
adv_read_lram_16_multi(adv, ADVV_MSGOUT_BEG,
|
|
(u_int16_t *) &out_msg,
|
|
sizeof(out_msg)/2);
|
|
|
|
if ((out_msg.msg_type == MSG_EXTENDED)
|
|
&& (out_msg.msg_len == MSG_EXT_SDTR_LEN)
|
|
&& (out_msg.msg_req == MSG_EXT_SDTR)) {
|
|
|
|
/* Revert to Async */
|
|
adv_set_syncrate(adv, /*struct cam_path */NULL,
|
|
tid_no, /*period*/0, /*offset*/0,
|
|
ADV_TRANS_GOAL|ADV_TRANS_ACTIVE);
|
|
}
|
|
q_cntl &= ~QC_MSG_OUT;
|
|
adv_write_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_CNTL, q_cntl);
|
|
} else if (int_halt_code == ADV_HALT_SS_QUEUE_FULL) {
|
|
u_int8_t scsi_status;
|
|
union ccb *ccb;
|
|
|
|
scsi_status = adv_read_lram_8(adv, halt_q_addr
|
|
+ ADV_SCSIQ_SCSI_STATUS);
|
|
ccb = (union ccb *) adv_read_lram_32(adv, halt_q_addr
|
|
+ ADV_SCSIQ_D_CCBPTR);
|
|
xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
|
|
ccb->ccb_h.status |= CAM_DEV_QFRZN|CAM_SCSI_STATUS_ERROR;
|
|
ccb->csio.scsi_status = SCSI_STATUS_QUEUE_FULL;
|
|
adv_abort_ccb(adv, tid_no, ADV_TIX_TO_LUN(target_ix),
|
|
/*ccb*/NULL, CAM_REQUEUE_REQ,
|
|
/*queued_only*/TRUE);
|
|
scsi_busy = adv_read_lram_8(adv, ADVV_SCSIBUSY_B);
|
|
scsi_busy &= ~target_mask;
|
|
adv_write_lram_8(adv, ADVV_SCSIBUSY_B, scsi_busy);
|
|
}
|
|
adv_write_lram_16(adv, ADVV_HALTCODE_W, 0);
|
|
}
|
|
|
|
void
|
|
adv_sdtr_to_period_offset(struct adv_softc *adv,
|
|
u_int8_t sync_data, u_int8_t *period,
|
|
u_int8_t *offset, int tid)
|
|
{
|
|
if (adv->fix_asyn_xfer & ADV_TID_TO_TARGET_MASK(tid)
|
|
&& (sync_data == ASYN_SDTR_DATA_FIX_PCI_REV_AB)) {
|
|
*period = *offset = 0;
|
|
} else {
|
|
*period = adv->sdtr_period_tbl[((sync_data >> 4) & 0xF)];
|
|
*offset = sync_data & 0xF;
|
|
}
|
|
}
|
|
|
|
void
|
|
adv_set_syncrate(struct adv_softc *adv, struct cam_path *path,
|
|
u_int tid, u_int period, u_int offset, u_int type)
|
|
{
|
|
struct adv_target_transinfo* tinfo;
|
|
u_int old_period;
|
|
u_int old_offset;
|
|
u_int8_t sdtr_data;
|
|
|
|
tinfo = &adv->tinfo[tid];
|
|
|
|
/* Filter our input */
|
|
sdtr_data = adv_period_offset_to_sdtr(adv, &period,
|
|
&offset, tid);
|
|
|
|
old_period = tinfo->current.period;
|
|
old_offset = tinfo->current.offset;
|
|
|
|
if ((type & ADV_TRANS_CUR) != 0
|
|
&& ((old_period != period || old_offset != offset)
|
|
|| period == 0 || offset == 0) /*Changes in asyn fix settings*/) {
|
|
int s;
|
|
int halted;
|
|
|
|
s = splcam();
|
|
halted = adv_is_chip_halted(adv);
|
|
if (halted == 0)
|
|
/* Must halt the chip first */
|
|
adv_host_req_chip_halt(adv);
|
|
|
|
/* Update current hardware settings */
|
|
adv_set_sdtr_reg_at_id(adv, tid, sdtr_data);
|
|
|
|
/*
|
|
* If a target can run in sync mode, we don't need
|
|
* to check it for sync problems.
|
|
*/
|
|
if (offset != 0)
|
|
adv->fix_asyn_xfer &= ~ADV_TID_TO_TARGET_MASK(tid);
|
|
|
|
if (halted == 0)
|
|
/* Start the chip again */
|
|
adv_start_chip(adv);
|
|
|
|
splx(s);
|
|
tinfo->current.period = period;
|
|
tinfo->current.offset = offset;
|
|
|
|
if (path != NULL) {
|
|
/*
|
|
* Tell the SCSI layer about the
|
|
* new transfer parameters.
|
|
*/
|
|
struct ccb_trans_settings neg;
|
|
|
|
neg.sync_period = period;
|
|
neg.sync_offset = offset;
|
|
neg.valid = CCB_TRANS_SYNC_RATE_VALID
|
|
| CCB_TRANS_SYNC_OFFSET_VALID;
|
|
xpt_setup_ccb(&neg.ccb_h, path, /*priority*/1);
|
|
xpt_async(AC_TRANSFER_NEG, path, &neg);
|
|
}
|
|
}
|
|
|
|
if ((type & ADV_TRANS_GOAL) != 0) {
|
|
tinfo->goal.period = period;
|
|
tinfo->goal.offset = offset;
|
|
}
|
|
|
|
if ((type & ADV_TRANS_USER) != 0) {
|
|
tinfo->user.period = period;
|
|
tinfo->user.offset = offset;
|
|
}
|
|
}
|
|
|
|
u_int8_t
|
|
adv_period_offset_to_sdtr(struct adv_softc *adv, u_int *period,
|
|
u_int *offset, int tid)
|
|
{
|
|
u_int i;
|
|
u_int dummy_offset;
|
|
u_int dummy_period;
|
|
|
|
if (offset == NULL) {
|
|
dummy_offset = 0;
|
|
offset = &dummy_offset;
|
|
}
|
|
|
|
if (period == NULL) {
|
|
dummy_period = 0;
|
|
period = &dummy_period;
|
|
}
|
|
|
|
#define MIN(a,b) (((a) < (b)) ? (a) : (b))
|
|
|
|
*offset = MIN(ADV_SYN_MAX_OFFSET, *offset);
|
|
if (*period != 0 && *offset != 0) {
|
|
for (i = 0; i < adv->sdtr_period_tbl_size; i++) {
|
|
if (*period <= adv->sdtr_period_tbl[i]) {
|
|
/*
|
|
* When responding to a target that requests
|
|
* sync, the requested rate may fall between
|
|
* two rates that we can output, but still be
|
|
* a rate that we can receive. Because of this,
|
|
* we want to respond to the target with
|
|
* the same rate that it sent to us even
|
|
* if the period we use to send data to it
|
|
* is lower. Only lower the response period
|
|
* if we must.
|
|
*/
|
|
if (i == 0 /* Our maximum rate */)
|
|
*period = adv->sdtr_period_tbl[0];
|
|
return ((i << 4) | *offset);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Must go async */
|
|
*period = 0;
|
|
*offset = 0;
|
|
if (adv->fix_asyn_xfer & ADV_TID_TO_TARGET_MASK(tid))
|
|
return (ASYN_SDTR_DATA_FIX_PCI_REV_AB);
|
|
return (0);
|
|
}
|
|
|
|
/* Internal Routines */
|
|
|
|
static void
|
|
adv_read_lram_16_multi(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t *buffer, int count)
|
|
{
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr);
|
|
ADV_INSW(adv, ADV_LRAM_DATA, buffer, count);
|
|
}
|
|
|
|
static void
|
|
adv_write_lram_16_multi(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t *buffer, int count)
|
|
{
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr);
|
|
ADV_OUTSW(adv, ADV_LRAM_DATA, buffer, count);
|
|
}
|
|
|
|
static void
|
|
adv_mset_lram_16(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t set_value, int count)
|
|
{
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr);
|
|
bus_space_set_multi_2(adv->tag, adv->bsh, ADV_LRAM_DATA,
|
|
set_value, count);
|
|
}
|
|
|
|
static u_int32_t
|
|
adv_msum_lram_16(struct adv_softc *adv, u_int16_t s_addr, int count)
|
|
{
|
|
u_int32_t sum;
|
|
int i;
|
|
|
|
sum = 0;
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr);
|
|
for (i = 0; i < count; i++)
|
|
sum += ADV_INW(adv, ADV_LRAM_DATA);
|
|
return (sum);
|
|
}
|
|
|
|
static int
|
|
adv_write_and_verify_lram_16(struct adv_softc *adv, u_int16_t addr,
|
|
u_int16_t value)
|
|
{
|
|
int retval;
|
|
|
|
retval = 0;
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, addr);
|
|
ADV_OUTW(adv, ADV_LRAM_DATA, value);
|
|
DELAY(10000);
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, addr);
|
|
if (value != ADV_INW(adv, ADV_LRAM_DATA))
|
|
retval = 1;
|
|
return (retval);
|
|
}
|
|
|
|
static u_int32_t
|
|
adv_read_lram_32(struct adv_softc *adv, u_int16_t addr)
|
|
{
|
|
u_int16_t val_low, val_high;
|
|
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, addr);
|
|
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
val_high = ADV_INW(adv, ADV_LRAM_DATA);
|
|
val_low = ADV_INW(adv, ADV_LRAM_DATA);
|
|
#else
|
|
val_low = ADV_INW(adv, ADV_LRAM_DATA);
|
|
val_high = ADV_INW(adv, ADV_LRAM_DATA);
|
|
#endif
|
|
|
|
return (((u_int32_t)val_high << 16) | (u_int32_t)val_low);
|
|
}
|
|
|
|
static void
|
|
adv_write_lram_32(struct adv_softc *adv, u_int16_t addr, u_int32_t value)
|
|
{
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, addr);
|
|
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
ADV_OUTW(adv, ADV_LRAM_DATA, (u_int16_t)((value >> 16) & 0xFFFF));
|
|
ADV_OUTW(adv, ADV_LRAM_DATA, (u_int16_t)(value & 0xFFFF));
|
|
#else
|
|
ADV_OUTW(adv, ADV_LRAM_DATA, (u_int16_t)(value & 0xFFFF));
|
|
ADV_OUTW(adv, ADV_LRAM_DATA, (u_int16_t)((value >> 16) & 0xFFFF));
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
adv_write_lram_32_multi(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int32_t *buffer, int count)
|
|
{
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr);
|
|
ADV_OUTSW(adv, ADV_LRAM_DATA, (u_int16_t *)buffer, count * 2);
|
|
}
|
|
|
|
static u_int16_t
|
|
adv_read_eeprom_16(struct adv_softc *adv, u_int8_t addr)
|
|
{
|
|
u_int16_t read_wval;
|
|
u_int8_t cmd_reg;
|
|
|
|
adv_write_eeprom_cmd_reg(adv, ADV_EEPROM_CMD_WRITE_DISABLE);
|
|
DELAY(1000);
|
|
cmd_reg = addr | ADV_EEPROM_CMD_READ;
|
|
adv_write_eeprom_cmd_reg(adv, cmd_reg);
|
|
DELAY(1000);
|
|
read_wval = ADV_INW(adv, ADV_EEPROM_DATA);
|
|
DELAY(1000);
|
|
return (read_wval);
|
|
}
|
|
|
|
static u_int16_t
|
|
adv_write_eeprom_16(struct adv_softc *adv, u_int8_t addr, u_int16_t value)
|
|
{
|
|
u_int16_t read_value;
|
|
|
|
read_value = adv_read_eeprom_16(adv, addr);
|
|
if (read_value != value) {
|
|
adv_write_eeprom_cmd_reg(adv, ADV_EEPROM_CMD_WRITE_ENABLE);
|
|
DELAY(1000);
|
|
|
|
ADV_OUTW(adv, ADV_EEPROM_DATA, value);
|
|
DELAY(1000);
|
|
|
|
adv_write_eeprom_cmd_reg(adv, ADV_EEPROM_CMD_WRITE | addr);
|
|
DELAY(20 * 1000);
|
|
|
|
adv_write_eeprom_cmd_reg(adv, ADV_EEPROM_CMD_WRITE_DISABLE);
|
|
DELAY(1000);
|
|
read_value = adv_read_eeprom_16(adv, addr);
|
|
}
|
|
return (read_value);
|
|
}
|
|
|
|
static int
|
|
adv_write_eeprom_cmd_reg(struct adv_softc *adv, u_int8_t cmd_reg)
|
|
{
|
|
u_int8_t read_back;
|
|
int retry;
|
|
|
|
retry = 0;
|
|
while (1) {
|
|
ADV_OUTB(adv, ADV_EEPROM_CMD, cmd_reg);
|
|
DELAY(1000);
|
|
read_back = ADV_INB(adv, ADV_EEPROM_CMD);
|
|
if (read_back == cmd_reg) {
|
|
return (1);
|
|
}
|
|
if (retry++ > ADV_EEPROM_MAX_RETRY) {
|
|
return (0);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
adv_set_eeprom_config_once(struct adv_softc *adv,
|
|
struct adv_eeprom_config *eeprom_config)
|
|
{
|
|
int n_error;
|
|
u_int16_t *wbuf;
|
|
u_int16_t sum;
|
|
u_int8_t s_addr;
|
|
u_int8_t cfg_beg;
|
|
u_int8_t cfg_end;
|
|
|
|
wbuf = (u_int16_t *)eeprom_config;
|
|
n_error = 0;
|
|
sum = 0;
|
|
for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) {
|
|
sum += *wbuf;
|
|
if (*wbuf != adv_write_eeprom_16(adv, s_addr, *wbuf)) {
|
|
n_error++;
|
|
}
|
|
}
|
|
if (adv->type & ADV_VL) {
|
|
cfg_beg = ADV_EEPROM_CFG_BEG_VL;
|
|
cfg_end = ADV_EEPROM_MAX_ADDR_VL;
|
|
} else {
|
|
cfg_beg = ADV_EEPROM_CFG_BEG;
|
|
cfg_end = ADV_EEPROM_MAX_ADDR;
|
|
}
|
|
|
|
for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) {
|
|
sum += *wbuf;
|
|
if (*wbuf != adv_write_eeprom_16(adv, s_addr, *wbuf)) {
|
|
n_error++;
|
|
}
|
|
}
|
|
*wbuf = sum;
|
|
if (sum != adv_write_eeprom_16(adv, s_addr, sum)) {
|
|
n_error++;
|
|
}
|
|
wbuf = (u_int16_t *)eeprom_config;
|
|
for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) {
|
|
if (*wbuf != adv_read_eeprom_16(adv, s_addr)) {
|
|
n_error++;
|
|
}
|
|
}
|
|
for (s_addr = cfg_beg; s_addr <= cfg_end; s_addr++, wbuf++) {
|
|
if (*wbuf != adv_read_eeprom_16(adv, s_addr)) {
|
|
n_error++;
|
|
}
|
|
}
|
|
return (n_error);
|
|
}
|
|
|
|
static u_int32_t
|
|
adv_load_microcode(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t *mcode_buf, u_int16_t mcode_size)
|
|
{
|
|
u_int32_t chksum;
|
|
u_int16_t mcode_lram_size;
|
|
u_int16_t mcode_chksum;
|
|
|
|
mcode_lram_size = mcode_size >> 1;
|
|
/* XXX Why zero the memory just before you write the whole thing?? */
|
|
adv_mset_lram_16(adv, s_addr, 0, mcode_lram_size);
|
|
adv_write_lram_16_multi(adv, s_addr, mcode_buf, mcode_lram_size);
|
|
|
|
chksum = adv_msum_lram_16(adv, s_addr, mcode_lram_size);
|
|
mcode_chksum = (u_int16_t)adv_msum_lram_16(adv, ADV_CODE_SEC_BEG,
|
|
((mcode_size - s_addr
|
|
- ADV_CODE_SEC_BEG) >> 1));
|
|
adv_write_lram_16(adv, ADVV_MCODE_CHKSUM_W, mcode_chksum);
|
|
adv_write_lram_16(adv, ADVV_MCODE_SIZE_W, mcode_size);
|
|
return (chksum);
|
|
}
|
|
|
|
static void
|
|
adv_reinit_lram(struct adv_softc *adv) {
|
|
adv_init_lram(adv);
|
|
adv_init_qlink_var(adv);
|
|
}
|
|
|
|
static void
|
|
adv_init_lram(struct adv_softc *adv)
|
|
{
|
|
u_int8_t i;
|
|
u_int16_t s_addr;
|
|
|
|
adv_mset_lram_16(adv, ADV_QADR_BEG, 0,
|
|
(((adv->max_openings + 2 + 1) * 64) >> 1));
|
|
|
|
i = ADV_MIN_ACTIVE_QNO;
|
|
s_addr = ADV_QADR_BEG + ADV_QBLK_SIZE;
|
|
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_FWD, i + 1);
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_BWD, adv->max_openings);
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_QNO, i);
|
|
i++;
|
|
s_addr += ADV_QBLK_SIZE;
|
|
for (; i < adv->max_openings; i++, s_addr += ADV_QBLK_SIZE) {
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_FWD, i + 1);
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_BWD, i - 1);
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_QNO, i);
|
|
}
|
|
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_FWD, ADV_QLINK_END);
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_BWD, adv->max_openings - 1);
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_QNO, adv->max_openings);
|
|
i++;
|
|
s_addr += ADV_QBLK_SIZE;
|
|
|
|
for (; i <= adv->max_openings + 3; i++, s_addr += ADV_QBLK_SIZE) {
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_FWD, i);
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_BWD, i);
|
|
adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_QNO, i);
|
|
}
|
|
}
|
|
|
|
static int
|
|
adv_init_microcode_var(struct adv_softc *adv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i <= ADV_MAX_TID; i++) {
|
|
|
|
/* Start out async all around */
|
|
adv_set_syncrate(adv, /*path*/NULL,
|
|
i, 0, 0,
|
|
ADV_TRANS_GOAL|ADV_TRANS_CUR);
|
|
}
|
|
|
|
adv_init_qlink_var(adv);
|
|
|
|
adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, adv->disc_enable);
|
|
adv_write_lram_8(adv, ADVV_HOSTSCSI_ID_B, 0x01 << adv->scsi_id);
|
|
|
|
adv_write_lram_32(adv, ADVV_OVERRUN_PADDR_D, adv->overrun_physbase);
|
|
|
|
adv_write_lram_32(adv, ADVV_OVERRUN_BSIZE_D, ADV_OVERRUN_BSIZE);
|
|
|
|
ADV_OUTW(adv, ADV_REG_PROG_COUNTER, ADV_MCODE_START_ADDR);
|
|
if (ADV_INW(adv, ADV_REG_PROG_COUNTER) != ADV_MCODE_START_ADDR) {
|
|
printf("adv%d: Unable to set program counter. Aborting.\n",
|
|
adv->unit);
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
adv_init_qlink_var(struct adv_softc *adv)
|
|
{
|
|
int i;
|
|
u_int16_t lram_addr;
|
|
|
|
adv_write_lram_8(adv, ADVV_NEXTRDY_B, 1);
|
|
adv_write_lram_8(adv, ADVV_DONENEXT_B, adv->max_openings);
|
|
|
|
adv_write_lram_16(adv, ADVV_FREE_Q_HEAD_W, 1);
|
|
adv_write_lram_16(adv, ADVV_DONE_Q_TAIL_W, adv->max_openings);
|
|
|
|
adv_write_lram_8(adv, ADVV_BUSY_QHEAD_B,
|
|
(u_int8_t)((int) adv->max_openings + 1));
|
|
adv_write_lram_8(adv, ADVV_DISC1_QHEAD_B,
|
|
(u_int8_t)((int) adv->max_openings + 2));
|
|
|
|
adv_write_lram_8(adv, ADVV_TOTAL_READY_Q_B, adv->max_openings);
|
|
|
|
adv_write_lram_16(adv, ADVV_ASCDVC_ERR_CODE_W, 0);
|
|
adv_write_lram_16(adv, ADVV_HALTCODE_W, 0);
|
|
adv_write_lram_8(adv, ADVV_STOP_CODE_B, 0);
|
|
adv_write_lram_8(adv, ADVV_SCSIBUSY_B, 0);
|
|
adv_write_lram_8(adv, ADVV_WTM_FLAG_B, 0);
|
|
adv_write_lram_8(adv, ADVV_Q_DONE_IN_PROGRESS_B, 0);
|
|
|
|
lram_addr = ADV_QADR_BEG;
|
|
for (i = 0; i < 32; i++, lram_addr += 2)
|
|
adv_write_lram_16(adv, lram_addr, 0);
|
|
}
|
|
|
|
static void
|
|
adv_disable_interrupt(struct adv_softc *adv)
|
|
{
|
|
u_int16_t cfg;
|
|
|
|
cfg = ADV_INW(adv, ADV_CONFIG_LSW);
|
|
ADV_OUTW(adv, ADV_CONFIG_LSW, cfg & ~ADV_CFG_LSW_HOST_INT_ON);
|
|
}
|
|
|
|
static void
|
|
adv_enable_interrupt(struct adv_softc *adv)
|
|
{
|
|
u_int16_t cfg;
|
|
|
|
cfg = ADV_INW(adv, ADV_CONFIG_LSW);
|
|
ADV_OUTW(adv, ADV_CONFIG_LSW, cfg | ADV_CFG_LSW_HOST_INT_ON);
|
|
}
|
|
|
|
static void
|
|
adv_toggle_irq_act(struct adv_softc *adv)
|
|
{
|
|
ADV_OUTW(adv, ADV_CHIP_STATUS, ADV_CIW_IRQ_ACT);
|
|
ADV_OUTW(adv, ADV_CHIP_STATUS, 0);
|
|
}
|
|
|
|
void
|
|
adv_start_execution(struct adv_softc *adv)
|
|
{
|
|
if (adv_read_lram_8(adv, ADV_STOP_CODE_B) != 0) {
|
|
adv_write_lram_8(adv, ADV_STOP_CODE_B, 0);
|
|
}
|
|
}
|
|
|
|
static int
|
|
adv_stop_chip(struct adv_softc *adv)
|
|
{
|
|
u_int8_t cc_val;
|
|
|
|
cc_val = ADV_INB(adv, ADV_CHIP_CTRL)
|
|
& (~(ADV_CC_SINGLE_STEP | ADV_CC_TEST | ADV_CC_DIAG));
|
|
ADV_OUTB(adv, ADV_CHIP_CTRL, cc_val | ADV_CC_HALT);
|
|
adv_set_chip_ih(adv, ADV_INS_HALT);
|
|
adv_set_chip_ih(adv, ADV_INS_RFLAG_WTM);
|
|
if ((ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_HALTED) == 0) {
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
static int
|
|
adv_host_req_chip_halt(struct adv_softc *adv)
|
|
{
|
|
int count;
|
|
u_int8_t saved_stop_code;
|
|
|
|
if (adv_is_chip_halted(adv))
|
|
return (1);
|
|
|
|
count = 0;
|
|
saved_stop_code = adv_read_lram_8(adv, ADVV_STOP_CODE_B);
|
|
adv_write_lram_8(adv, ADVV_STOP_CODE_B,
|
|
ADV_STOP_HOST_REQ_RISC_HALT | ADV_STOP_REQ_RISC_STOP);
|
|
while (adv_is_chip_halted(adv) == 0
|
|
&& count++ < 2000)
|
|
;
|
|
|
|
adv_write_lram_8(adv, ADVV_STOP_CODE_B, saved_stop_code);
|
|
return (count < 2000);
|
|
}
|
|
|
|
static void
|
|
adv_set_chip_ih(struct adv_softc *adv, u_int16_t ins_code)
|
|
{
|
|
adv_set_bank(adv, 1);
|
|
ADV_OUTW(adv, ADV_REG_IH, ins_code);
|
|
adv_set_bank(adv, 0);
|
|
}
|
|
|
|
#if UNUSED
|
|
static u_int8_t
|
|
adv_get_chip_scsi_ctrl(struct adv_softc *adv)
|
|
{
|
|
u_int8_t scsi_ctrl;
|
|
|
|
adv_set_bank(adv, 1);
|
|
scsi_ctrl = ADV_INB(adv, ADV_REG_SC);
|
|
adv_set_bank(adv, 0);
|
|
return (scsi_ctrl);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* XXX Looks like more padding issues in this routine as well.
|
|
* There has to be a way to turn this into an insw.
|
|
*/
|
|
static void
|
|
adv_get_q_info(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t *inbuf, int words)
|
|
{
|
|
int i;
|
|
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr);
|
|
for (i = 0; i < words; i++, inbuf++) {
|
|
if (i == 5) {
|
|
continue;
|
|
}
|
|
*inbuf = ADV_INW(adv, ADV_LRAM_DATA);
|
|
}
|
|
}
|
|
|
|
static u_int
|
|
adv_get_num_free_queues(struct adv_softc *adv, u_int8_t n_qs)
|
|
{
|
|
u_int cur_used_qs;
|
|
u_int cur_free_qs;
|
|
|
|
cur_used_qs = adv->cur_active + ADV_MIN_FREE_Q;
|
|
|
|
if ((cur_used_qs + n_qs) <= adv->max_openings) {
|
|
cur_free_qs = adv->max_openings - cur_used_qs;
|
|
return (cur_free_qs);
|
|
}
|
|
adv->openings_needed = n_qs;
|
|
return (0);
|
|
}
|
|
|
|
static u_int8_t
|
|
adv_alloc_free_queues(struct adv_softc *adv, u_int8_t free_q_head,
|
|
u_int8_t n_free_q)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < n_free_q; i++) {
|
|
free_q_head = adv_alloc_free_queue(adv, free_q_head);
|
|
if (free_q_head == ADV_QLINK_END)
|
|
break;
|
|
}
|
|
return (free_q_head);
|
|
}
|
|
|
|
static u_int8_t
|
|
adv_alloc_free_queue(struct adv_softc *adv, u_int8_t free_q_head)
|
|
{
|
|
u_int16_t q_addr;
|
|
u_int8_t next_qp;
|
|
u_int8_t q_status;
|
|
|
|
next_qp = ADV_QLINK_END;
|
|
q_addr = ADV_QNO_TO_QADDR(free_q_head);
|
|
q_status = adv_read_lram_8(adv, q_addr + ADV_SCSIQ_B_STATUS);
|
|
|
|
if ((q_status & QS_READY) == 0)
|
|
next_qp = adv_read_lram_8(adv, q_addr + ADV_SCSIQ_B_FWD);
|
|
|
|
return (next_qp);
|
|
}
|
|
|
|
static int
|
|
adv_send_scsi_queue(struct adv_softc *adv, struct adv_scsi_q *scsiq,
|
|
u_int8_t n_q_required)
|
|
{
|
|
u_int8_t free_q_head;
|
|
u_int8_t next_qp;
|
|
u_int8_t tid_no;
|
|
u_int8_t target_ix;
|
|
int retval;
|
|
|
|
retval = 1;
|
|
target_ix = scsiq->q2.target_ix;
|
|
tid_no = ADV_TIX_TO_TID(target_ix);
|
|
free_q_head = adv_read_lram_16(adv, ADVV_FREE_Q_HEAD_W) & 0xFF;
|
|
if ((next_qp = adv_alloc_free_queues(adv, free_q_head, n_q_required))
|
|
!= ADV_QLINK_END) {
|
|
scsiq->q1.q_no = free_q_head;
|
|
|
|
/*
|
|
* Now that we know our Q number, point our sense
|
|
* buffer pointer to a bus dma mapped area where
|
|
* we can dma the data to.
|
|
*/
|
|
scsiq->q1.sense_addr = adv->sense_physbase
|
|
+ ((free_q_head - 1) * sizeof(struct scsi_sense_data));
|
|
adv_put_ready_sg_list_queue(adv, scsiq, free_q_head);
|
|
adv_write_lram_16(adv, ADVV_FREE_Q_HEAD_W, next_qp);
|
|
adv->cur_active += n_q_required;
|
|
retval = 0;
|
|
}
|
|
return (retval);
|
|
}
|
|
|
|
|
|
static void
|
|
adv_put_ready_sg_list_queue(struct adv_softc *adv, struct adv_scsi_q *scsiq,
|
|
u_int q_no)
|
|
{
|
|
u_int8_t sg_list_dwords;
|
|
u_int8_t sg_index, i;
|
|
u_int8_t sg_entry_cnt;
|
|
u_int8_t next_qp;
|
|
u_int16_t q_addr;
|
|
struct adv_sg_head *sg_head;
|
|
struct adv_sg_list_q scsi_sg_q;
|
|
|
|
sg_head = scsiq->sg_head;
|
|
|
|
if (sg_head) {
|
|
sg_entry_cnt = sg_head->entry_cnt - 1;
|
|
#ifdef DIAGNOSTIC
|
|
if (sg_entry_cnt == 0)
|
|
panic("adv_put_ready_sg_list_queue: ScsiQ with "
|
|
"a SG list but only one element");
|
|
if ((scsiq->q1.cntl & QC_SG_HEAD) == 0)
|
|
panic("adv_put_ready_sg_list_queue: ScsiQ with "
|
|
"a SG list but QC_SG_HEAD not set");
|
|
#endif
|
|
q_addr = ADV_QNO_TO_QADDR(q_no);
|
|
sg_index = 1;
|
|
scsiq->q1.sg_queue_cnt = sg_head->queue_cnt;
|
|
scsi_sg_q.sg_head_qp = q_no;
|
|
scsi_sg_q.cntl = QCSG_SG_XFER_LIST;
|
|
for (i = 0; i < sg_head->queue_cnt; i++) {
|
|
u_int8_t segs_this_q;
|
|
|
|
if (sg_entry_cnt > ADV_SG_LIST_PER_Q)
|
|
segs_this_q = ADV_SG_LIST_PER_Q;
|
|
else {
|
|
/* This will be the last segment then */
|
|
segs_this_q = sg_entry_cnt;
|
|
scsi_sg_q.cntl |= QCSG_SG_XFER_END;
|
|
}
|
|
scsi_sg_q.seq_no = i + 1;
|
|
sg_list_dwords = segs_this_q << 1;
|
|
if (i == 0) {
|
|
scsi_sg_q.sg_list_cnt = segs_this_q;
|
|
scsi_sg_q.sg_cur_list_cnt = segs_this_q;
|
|
} else {
|
|
scsi_sg_q.sg_list_cnt = segs_this_q - 1;
|
|
scsi_sg_q.sg_cur_list_cnt = segs_this_q - 1;
|
|
}
|
|
next_qp = adv_read_lram_8(adv, q_addr + ADV_SCSIQ_B_FWD);
|
|
scsi_sg_q.q_no = next_qp;
|
|
q_addr = ADV_QNO_TO_QADDR(next_qp);
|
|
|
|
adv_write_lram_16_multi(adv,
|
|
q_addr + ADV_SCSIQ_SGHD_CPY_BEG,
|
|
(u_int16_t *)&scsi_sg_q,
|
|
sizeof(scsi_sg_q) >> 1);
|
|
adv_write_lram_32_multi(adv, q_addr + ADV_SGQ_LIST_BEG,
|
|
(u_int32_t *)&sg_head->sg_list[sg_index],
|
|
sg_list_dwords);
|
|
sg_entry_cnt -= segs_this_q;
|
|
sg_index += ADV_SG_LIST_PER_Q;
|
|
}
|
|
}
|
|
adv_put_ready_queue(adv, scsiq, q_no);
|
|
}
|
|
|
|
static void
|
|
adv_put_ready_queue(struct adv_softc *adv, struct adv_scsi_q *scsiq,
|
|
u_int q_no)
|
|
{
|
|
struct adv_target_transinfo* tinfo;
|
|
u_int q_addr;
|
|
u_int tid_no;
|
|
|
|
tid_no = ADV_TIX_TO_TID(scsiq->q2.target_ix);
|
|
tinfo = &adv->tinfo[tid_no];
|
|
if ((tinfo->current.period != tinfo->goal.period)
|
|
|| (tinfo->current.offset != tinfo->goal.offset)) {
|
|
|
|
adv_msgout_sdtr(adv, tinfo->goal.period, tinfo->goal.offset);
|
|
scsiq->q1.cntl |= QC_MSG_OUT;
|
|
}
|
|
q_addr = ADV_QNO_TO_QADDR(q_no);
|
|
|
|
scsiq->q1.status = QS_FREE;
|
|
|
|
adv_write_lram_16_multi(adv, q_addr + ADV_SCSIQ_CDB_BEG,
|
|
(u_int16_t *)scsiq->cdbptr,
|
|
scsiq->q2.cdb_len >> 1);
|
|
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
adv_adj_scsiq_endian(scsiq);
|
|
#endif
|
|
|
|
adv_put_scsiq(adv, q_addr + ADV_SCSIQ_CPY_BEG,
|
|
(u_int16_t *) &scsiq->q1.cntl,
|
|
((sizeof(scsiq->q1) + sizeof(scsiq->q2)) / 2) - 1);
|
|
|
|
#if CC_WRITE_IO_COUNT
|
|
adv_write_lram_16(adv, q_addr + ADV_SCSIQ_W_REQ_COUNT,
|
|
adv->req_count);
|
|
#endif
|
|
|
|
#if CC_CLEAR_DMA_REMAIN
|
|
|
|
adv_write_lram_32(adv, q_addr + ADV_SCSIQ_DW_REMAIN_XFER_ADDR, 0);
|
|
adv_write_lram_32(adv, q_addr + ADV_SCSIQ_DW_REMAIN_XFER_CNT, 0);
|
|
#endif
|
|
|
|
adv_write_lram_16(adv, q_addr + ADV_SCSIQ_B_STATUS,
|
|
(scsiq->q1.q_no << 8) | QS_READY);
|
|
}
|
|
|
|
static void
|
|
adv_put_scsiq(struct adv_softc *adv, u_int16_t s_addr,
|
|
u_int16_t *buffer, int words)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* XXX This routine makes *gross* assumptions
|
|
* about padding in the data structures.
|
|
* Either the data structures should have explicit
|
|
* padding members added, or they should have padding
|
|
* turned off via compiler attributes depending on
|
|
* which yields better overall performance. My hunch
|
|
* would be that turning off padding would be the
|
|
* faster approach as an outsw is much faster than
|
|
* this crude loop and accessing un-aligned data
|
|
* members isn't *that* expensive. The other choice
|
|
* would be to modify the ASC script so that the
|
|
* the adv_scsiq_1 structure can be re-arranged so
|
|
* padding isn't required.
|
|
*/
|
|
ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr);
|
|
for (i = 0; i < words; i++, buffer++) {
|
|
if (i == 2 || i == 10) {
|
|
continue;
|
|
}
|
|
ADV_OUTW(adv, ADV_LRAM_DATA, *buffer);
|
|
}
|
|
}
|
|
|
|
static void
|
|
adv_handle_extmsg_in(struct adv_softc *adv, u_int16_t halt_q_addr,
|
|
u_int8_t q_cntl, target_bit_vector target_mask,
|
|
int tid_no)
|
|
{
|
|
struct ext_msg ext_msg;
|
|
|
|
adv_read_lram_16_multi(adv, ADVV_MSGIN_BEG, (u_int16_t *) &ext_msg,
|
|
sizeof(ext_msg) >> 1);
|
|
if ((ext_msg.msg_type == MSG_EXTENDED)
|
|
&& (ext_msg.msg_req == MSG_EXT_SDTR)
|
|
&& (ext_msg.msg_len == MSG_EXT_SDTR_LEN)) {
|
|
union ccb *ccb;
|
|
struct adv_target_transinfo* tinfo;
|
|
u_int period;
|
|
u_int offset;
|
|
int sdtr_accept;
|
|
u_int8_t orig_offset;
|
|
|
|
ccb = (union ccb *) adv_read_lram_32(adv, halt_q_addr
|
|
+ ADV_SCSIQ_D_CCBPTR);
|
|
tinfo = &adv->tinfo[tid_no];
|
|
sdtr_accept = TRUE;
|
|
|
|
orig_offset = ext_msg.req_ack_offset;
|
|
if (ext_msg.xfer_period < tinfo->goal.period) {
|
|
sdtr_accept = FALSE;
|
|
ext_msg.xfer_period = tinfo->goal.period;
|
|
}
|
|
|
|
/* Perform range checking */
|
|
period = ext_msg.xfer_period;
|
|
offset = ext_msg.req_ack_offset;
|
|
adv_period_offset_to_sdtr(adv, &period, &offset, tid_no);
|
|
ext_msg.xfer_period = period;
|
|
ext_msg.req_ack_offset = offset;
|
|
|
|
/* Record our current sync settings */
|
|
adv_set_syncrate(adv, ccb->ccb_h.path,
|
|
tid_no, ext_msg.xfer_period,
|
|
ext_msg.req_ack_offset,
|
|
ADV_TRANS_GOAL|ADV_TRANS_ACTIVE);
|
|
|
|
/* Offset too high or large period forced async */
|
|
if (orig_offset != ext_msg.req_ack_offset)
|
|
sdtr_accept = FALSE;
|
|
|
|
if (sdtr_accept && (q_cntl & QC_MSG_OUT)) {
|
|
/* Valid response to our requested negotiation */
|
|
q_cntl &= ~QC_MSG_OUT;
|
|
} else {
|
|
/* Must Respond */
|
|
q_cntl |= QC_MSG_OUT;
|
|
adv_msgout_sdtr(adv, ext_msg.xfer_period,
|
|
ext_msg.req_ack_offset);
|
|
}
|
|
|
|
} else if (ext_msg.msg_type == MSG_EXTENDED
|
|
&& ext_msg.msg_req == MSG_EXT_WDTR
|
|
&& ext_msg.msg_len == MSG_EXT_WDTR_LEN) {
|
|
|
|
ext_msg.wdtr_width = 0;
|
|
adv_write_lram_16_multi(adv, ADVV_MSGOUT_BEG,
|
|
(u_int16_t *)&ext_msg,
|
|
sizeof(ext_msg) >> 1);
|
|
q_cntl |= QC_MSG_OUT;
|
|
} else {
|
|
|
|
ext_msg.msg_type = MSG_MESSAGE_REJECT;
|
|
adv_write_lram_16_multi(adv, ADVV_MSGOUT_BEG,
|
|
(u_int16_t *)&ext_msg,
|
|
sizeof(ext_msg) >> 1);
|
|
q_cntl |= QC_MSG_OUT;
|
|
}
|
|
adv_write_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_CNTL, q_cntl);
|
|
}
|
|
|
|
static void
|
|
adv_msgout_sdtr(struct adv_softc *adv, u_int8_t sdtr_period,
|
|
u_int8_t sdtr_offset)
|
|
{
|
|
struct ext_msg sdtr_buf;
|
|
|
|
sdtr_buf.msg_type = MSG_EXTENDED;
|
|
sdtr_buf.msg_len = MSG_EXT_SDTR_LEN;
|
|
sdtr_buf.msg_req = MSG_EXT_SDTR;
|
|
sdtr_buf.xfer_period = sdtr_period;
|
|
sdtr_offset &= ADV_SYN_MAX_OFFSET;
|
|
sdtr_buf.req_ack_offset = sdtr_offset;
|
|
adv_write_lram_16_multi(adv, ADVV_MSGOUT_BEG,
|
|
(u_int16_t *) &sdtr_buf,
|
|
sizeof(sdtr_buf) / 2);
|
|
}
|
|
|
|
int
|
|
adv_abort_ccb(struct adv_softc *adv, int target, int lun, union ccb *ccb,
|
|
u_int32_t status, int queued_only)
|
|
{
|
|
u_int16_t q_addr;
|
|
u_int8_t q_no;
|
|
struct adv_q_done_info scsiq_buf;
|
|
struct adv_q_done_info *scsiq;
|
|
u_int8_t target_ix;
|
|
int count;
|
|
|
|
scsiq = &scsiq_buf;
|
|
target_ix = ADV_TIDLUN_TO_IX(target, lun);
|
|
count = 0;
|
|
for (q_no = ADV_MIN_ACTIVE_QNO; q_no <= adv->max_openings; q_no++) {
|
|
q_addr = ADV_QNO_TO_QADDR(q_no);
|
|
|
|
adv_copy_lram_doneq(adv, q_addr, scsiq, adv->max_dma_count);
|
|
if (((scsiq->q_status & QS_READY) != 0)
|
|
&& ((scsiq->q_status & QS_ABORTED) == 0)
|
|
&& ((scsiq->cntl & QCSG_SG_XFER_LIST) == 0)
|
|
&& (scsiq->d2.target_ix == target_ix)
|
|
&& (queued_only == 0
|
|
|| !(scsiq->q_status & (QS_DISC1|QS_DISC2|QS_BUSY|QS_DONE)))
|
|
&& (ccb == NULL || (ccb == (union ccb *)scsiq->d2.ccb_ptr))) {
|
|
union ccb *aborted_ccb;
|
|
struct adv_ccb_info *cinfo;
|
|
|
|
scsiq->q_status |= QS_ABORTED;
|
|
adv_write_lram_8(adv, q_addr + ADV_SCSIQ_B_STATUS,
|
|
scsiq->q_status);
|
|
aborted_ccb = (union ccb *)scsiq->d2.ccb_ptr;
|
|
/* Don't clobber earlier error codes */
|
|
if ((aborted_ccb->ccb_h.status & CAM_STATUS_MASK)
|
|
== CAM_REQ_INPROG)
|
|
aborted_ccb->ccb_h.status |= status;
|
|
cinfo = (struct adv_ccb_info *)
|
|
aborted_ccb->ccb_h.ccb_cinfo_ptr;
|
|
cinfo->state |= ACCB_ABORT_QUEUED;
|
|
count++;
|
|
}
|
|
}
|
|
return (count);
|
|
}
|
|
|
|
int
|
|
adv_reset_bus(struct adv_softc *adv)
|
|
{
|
|
int count;
|
|
int i;
|
|
union ccb *ccb;
|
|
|
|
adv_reset_chip_and_scsi_bus(adv);
|
|
adv_reinit_lram(adv);
|
|
for (i = 0; i <= ADV_MAX_TID; i++) {
|
|
if (adv->fix_asyn_xfer & (0x01 << i))
|
|
adv_set_sdtr_reg_at_id(adv, i,
|
|
ASYN_SDTR_DATA_FIX_PCI_REV_AB);
|
|
}
|
|
ADV_OUTW(adv, ADV_REG_PROG_COUNTER, ADV_MCODE_START_ADDR);
|
|
|
|
/* Tell the XPT layer that a bus reset occured */
|
|
if (adv->path != NULL)
|
|
xpt_async(AC_BUS_RESET, adv->path, NULL);
|
|
|
|
count = 0;
|
|
while ((ccb = (union ccb *)LIST_FIRST(&adv->pending_ccbs)) != NULL) {
|
|
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG)
|
|
ccb->ccb_h.status |= CAM_SCSI_BUS_RESET;
|
|
adv_done(adv, ccb, QD_ABORTED_BY_HOST, 0, 0, 0);
|
|
count++;
|
|
}
|
|
|
|
adv_start_chip(adv);
|
|
return (count);
|
|
}
|
|
|
|
static void
|
|
adv_set_sdtr_reg_at_id(struct adv_softc *adv, int tid, u_int8_t sdtr_data)
|
|
{
|
|
int orig_id;
|
|
|
|
adv_set_bank(adv, 1);
|
|
orig_id = ffs(ADV_INB(adv, ADV_HOST_SCSIID)) - 1;
|
|
ADV_OUTB(adv, ADV_HOST_SCSIID, tid);
|
|
if (ADV_INB(adv, ADV_HOST_SCSIID) == (0x01 << tid)) {
|
|
adv_set_bank(adv, 0);
|
|
ADV_OUTB(adv, ADV_SYN_OFFSET, sdtr_data);
|
|
}
|
|
adv_set_bank(adv, 1);
|
|
ADV_OUTB(adv, ADV_HOST_SCSIID, orig_id);
|
|
adv_set_bank(adv, 0);
|
|
}
|