d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
217ad7d2a5
freebsd-skq/sys/dev/ath/ath_hal/ah.c
Adrian Chadd 85ca341a79 Add ath_hal_get_curmode() - this is used by the Osprey HAL. 
Obtained from:	Qualcomm Atheros
2012-08-24 00:52:37 +00:00

1391 lines
39 KiB
C
Raw Blame History

/*
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* Copyright (c) 2002-2008 Atheros Communications, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $FreeBSD$
*/
#include "opt_ah.h"
#include "ah.h"
#include "ah_internal.h"
#include "ah_devid.h"
#include "ah_eeprom.h" /* for 5ghz fast clock flag */
#include "ar5416/ar5416reg.h" /* NB: includes ar5212reg.h */
#include "ar9003/ar9300_devid.h"
/* linker set of registered chips */
OS_SET_DECLARE(ah_chips, struct ath_hal_chip);
/*
* Check the set of registered chips to see if any recognize
* the device as one they can support.
*/
const char*
ath_hal_probe(uint16_t vendorid, uint16_t devid)
{
struct ath_hal_chip * const *pchip;
OS_SET_FOREACH(pchip, ah_chips) {
const char *name = (*pchip)->probe(vendorid, devid);
if (name != AH_NULL)
return name;
}
return AH_NULL;
}
/*
* Attach detects device chip revisions, initializes the hwLayer
* function list, reads EEPROM information,
* selects reset vectors, and performs a short self test.
* Any failures will return an error that should cause a hardware
* disable.
*/
struct ath_hal*
ath_hal_attach(uint16_t devid, HAL_SOFTC sc,
HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata, HAL_STATUS *error)
{
struct ath_hal_chip * const *pchip;
OS_SET_FOREACH(pchip, ah_chips) {
struct ath_hal_chip *chip = *pchip;
struct ath_hal *ah;
/* XXX don't have vendorid, assume atheros one works */
if (chip->probe(ATHEROS_VENDOR_ID, devid) == AH_NULL)
continue;
ah = chip->attach(devid, sc, st, sh, eepromdata, error);
if (ah != AH_NULL) {
/* copy back private state to public area */
ah->ah_devid = AH_PRIVATE(ah)->ah_devid;
ah->ah_subvendorid = AH_PRIVATE(ah)->ah_subvendorid;
ah->ah_macVersion = AH_PRIVATE(ah)->ah_macVersion;
ah->ah_macRev = AH_PRIVATE(ah)->ah_macRev;
ah->ah_phyRev = AH_PRIVATE(ah)->ah_phyRev;
ah->ah_analog5GhzRev = AH_PRIVATE(ah)->ah_analog5GhzRev;
ah->ah_analog2GhzRev = AH_PRIVATE(ah)->ah_analog2GhzRev;
return ah;
}
}
return AH_NULL;
}
const char *
ath_hal_mac_name(struct ath_hal *ah)
{
switch (ah->ah_macVersion) {
case AR_SREV_VERSION_CRETE:
case AR_SREV_VERSION_MAUI_1:
return "5210";
case AR_SREV_VERSION_MAUI_2:
case AR_SREV_VERSION_OAHU:
return "5211";
case AR_SREV_VERSION_VENICE:
return "5212";
case AR_SREV_VERSION_GRIFFIN:
return "2413";
case AR_SREV_VERSION_CONDOR:
return "5424";
case AR_SREV_VERSION_EAGLE:
return "5413";
case AR_SREV_VERSION_COBRA:
return "2415";
case AR_SREV_2425: /* Swan */
return "2425";
case AR_SREV_2417: /* Nala */
return "2417";
case AR_XSREV_VERSION_OWL_PCI:
return "5416";
case AR_XSREV_VERSION_OWL_PCIE:
return "5418";
case AR_XSREV_VERSION_HOWL:
return "9130";
case AR_XSREV_VERSION_SOWL:
return "9160";
case AR_XSREV_VERSION_MERLIN:
if (AH_PRIVATE(ah)->ah_ispcie)
return "9280";
return "9220";
case AR_XSREV_VERSION_KITE:
return "9285";
case AR_XSREV_VERSION_KIWI:
if (AH_PRIVATE(ah)->ah_ispcie)
return "9287";
return "9227";
case AR_SREV_VERSION_AR9380:
if (ah->ah_macRev >= AR_SREV_REVISION_AR9580_10)
return "9580";
return "9380";
case AR_SREV_VERSION_AR9460:
return "9460";
case AR_SREV_VERSION_AR9330:
return "9330";
case AR_SREV_VERSION_AR9340:
return "9340";
case AR_SREV_VERSION_QCA9550:
/* XXX should say QCA, not AR */
return "9550";
case AR_SREV_VERSION_AR9485:
return "9485";
}
return "????";
}
/*
* Return the mask of available modes based on the hardware capabilities.
*/
u_int
ath_hal_getwirelessmodes(struct ath_hal*ah)
{
return ath_hal_getWirelessModes(ah);
}
/* linker set of registered RF backends */
OS_SET_DECLARE(ah_rfs, struct ath_hal_rf);
/*
* Check the set of registered RF backends to see if
* any recognize the device as one they can support.
*/
struct ath_hal_rf *
ath_hal_rfprobe(struct ath_hal *ah, HAL_STATUS *ecode)
{
struct ath_hal_rf * const *prf;
OS_SET_FOREACH(prf, ah_rfs) {
struct ath_hal_rf *rf = *prf;
if (rf->probe(ah))
return rf;
}
*ecode = HAL_ENOTSUPP;
return AH_NULL;
}
const char *
ath_hal_rf_name(struct ath_hal *ah)
{
switch (ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) {
case 0: /* 5210 */
return "5110"; /* NB: made up */
case AR_RAD5111_SREV_MAJOR:
case AR_RAD5111_SREV_PROD:
return "5111";
case AR_RAD2111_SREV_MAJOR:
return "2111";
case AR_RAD5112_SREV_MAJOR:
case AR_RAD5112_SREV_2_0:
case AR_RAD5112_SREV_2_1:
return "5112";
case AR_RAD2112_SREV_MAJOR:
case AR_RAD2112_SREV_2_0:
case AR_RAD2112_SREV_2_1:
return "2112";
case AR_RAD2413_SREV_MAJOR:
return "2413";
case AR_RAD5413_SREV_MAJOR:
return "5413";
case AR_RAD2316_SREV_MAJOR:
return "2316";
case AR_RAD2317_SREV_MAJOR:
return "2317";
case AR_RAD5424_SREV_MAJOR:
return "5424";
case AR_RAD5133_SREV_MAJOR:
return "5133";
case AR_RAD2133_SREV_MAJOR:
return "2133";
case AR_RAD5122_SREV_MAJOR:
return "5122";
case AR_RAD2122_SREV_MAJOR:
return "2122";
}
return "????";
}
/*
* Poll the register looking for a specific value.
*/
HAL_BOOL
ath_hal_wait(struct ath_hal *ah, u_int reg, uint32_t mask, uint32_t val)
{
#define AH_TIMEOUT 1000
return ath_hal_waitfor(ah, reg, mask, val, AH_TIMEOUT);
#undef AH_TIMEOUT
}
HAL_BOOL
ath_hal_waitfor(struct ath_hal *ah, u_int reg, uint32_t mask, uint32_t val, uint32_t timeout)
{
int i;
for (i = 0; i < timeout; i++) {
if ((OS_REG_READ(ah, reg) & mask) == val)
return AH_TRUE;
OS_DELAY(10);
}
HALDEBUG(ah, HAL_DEBUG_REGIO | HAL_DEBUG_PHYIO,
"%s: timeout on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
__func__, reg, OS_REG_READ(ah, reg), mask, val);
return AH_FALSE;
}
/*
* Reverse the bits starting at the low bit for a value of
* bit_count in size
*/
uint32_t
ath_hal_reverseBits(uint32_t val, uint32_t n)
{
uint32_t retval;
int i;
for (i = 0, retval = 0; i < n; i++) {
retval = (retval << 1) | (val & 1);
val >>= 1;
}
return retval;
}
/* 802.11n related timing definitions */
#define OFDM_PLCP_BITS 22
#define HT_L_STF 8
#define HT_L_LTF 8
#define HT_L_SIG 4
#define HT_SIG 8
#define HT_STF 4
#define HT_LTF(n) ((n) * 4)
#define HT_RC_2_MCS(_rc) ((_rc) & 0xf)
#define HT_RC_2_STREAMS(_rc) ((((_rc) & 0x78) >> 3) + 1)
#define IS_HT_RATE(_rc) ( (_rc) & IEEE80211_RATE_MCS)
/*
* Calculate the duration of a packet whether it is 11n or legacy.
*/
uint32_t
ath_hal_pkt_txtime(struct ath_hal *ah, const HAL_RATE_TABLE *rates, uint32_t frameLen,
uint16_t rateix, HAL_BOOL isht40, HAL_BOOL shortPreamble)
{
uint8_t rc;
int numStreams;
rc = rates->info[rateix].rateCode;
/* Legacy rate? Return the old way */
if (! IS_HT_RATE(rc))
return ath_hal_computetxtime(ah, rates, frameLen, rateix, shortPreamble);
/* 11n frame - extract out the number of spatial streams */
numStreams = HT_RC_2_STREAMS(rc);
KASSERT(numStreams > 0 && numStreams <= 4,
("number of spatial streams needs to be 1..3: MCS rate 0x%x!",
rateix));
return ath_computedur_ht(frameLen, rc, numStreams, isht40, shortPreamble);
}
static const uint16_t ht20_bps[32] = {
26, 52, 78, 104, 156, 208, 234, 260,
52, 104, 156, 208, 312, 416, 468, 520,
78, 156, 234, 312, 468, 624, 702, 780,
104, 208, 312, 416, 624, 832, 936, 1040
};
static const uint16_t ht40_bps[32] = {
54, 108, 162, 216, 324, 432, 486, 540,
108, 216, 324, 432, 648, 864, 972, 1080,
162, 324, 486, 648, 972, 1296, 1458, 1620,
216, 432, 648, 864, 1296, 1728, 1944, 2160
};
/*
* Calculate the transmit duration of an 11n frame.
*/
uint32_t
ath_computedur_ht(uint32_t frameLen, uint16_t rate, int streams,
HAL_BOOL isht40, HAL_BOOL isShortGI)
{
uint32_t bitsPerSymbol, numBits, numSymbols, txTime;
KASSERT(rate & IEEE80211_RATE_MCS, ("not mcs %d", rate));
KASSERT((rate &~ IEEE80211_RATE_MCS) < 31, ("bad mcs 0x%x", rate));
if (isht40)
bitsPerSymbol = ht40_bps[rate & 0xf];
else
bitsPerSymbol = ht20_bps[rate & 0xf];
numBits = OFDM_PLCP_BITS + (frameLen << 3);
numSymbols = howmany(numBits, bitsPerSymbol);
if (isShortGI)
txTime = ((numSymbols * 18) + 4) / 5; /* 3.6us */
else
txTime = numSymbols * 4; /* 4us */
return txTime + HT_L_STF + HT_L_LTF +
HT_L_SIG + HT_SIG + HT_STF + HT_LTF(streams);
}
/*
* Compute the time to transmit a frame of length frameLen bytes
* using the specified rate, phy, and short preamble setting.
*/
uint16_t
ath_hal_computetxtime(struct ath_hal *ah,
const HAL_RATE_TABLE *rates, uint32_t frameLen, uint16_t rateix,
HAL_BOOL shortPreamble)
{
uint32_t bitsPerSymbol, numBits, numSymbols, phyTime, txTime;
uint32_t kbps;
/* Warn if this function is called for 11n rates; it should not be! */
if (IS_HT_RATE(rates->info[rateix].rateCode))
ath_hal_printf(ah, "%s: MCS rate? (index %d; hwrate 0x%x)\n",
__func__, rateix, rates->info[rateix].rateCode);
kbps = rates->info[rateix].rateKbps;
/*
* index can be invalid duting dynamic Turbo transitions.
* XXX
*/
if (kbps == 0)
return 0;
switch (rates->info[rateix].phy) {
case IEEE80211_T_CCK:
phyTime = CCK_PREAMBLE_BITS + CCK_PLCP_BITS;
if (shortPreamble && rates->info[rateix].shortPreamble)
phyTime >>= 1;
numBits = frameLen << 3;
txTime = CCK_SIFS_TIME + phyTime
+ ((numBits * 1000)/kbps);
break;
case IEEE80211_T_OFDM:
bitsPerSymbol = (kbps * OFDM_SYMBOL_TIME) / 1000;
HALASSERT(bitsPerSymbol != 0);
numBits = OFDM_PLCP_BITS + (frameLen << 3);
numSymbols = howmany(numBits, bitsPerSymbol);
txTime = OFDM_SIFS_TIME
+ OFDM_PREAMBLE_TIME
+ (numSymbols * OFDM_SYMBOL_TIME);
break;
case IEEE80211_T_OFDM_HALF:
bitsPerSymbol = (kbps * OFDM_HALF_SYMBOL_TIME) / 1000;
HALASSERT(bitsPerSymbol != 0);
numBits = OFDM_HALF_PLCP_BITS + (frameLen << 3);
numSymbols = howmany(numBits, bitsPerSymbol);
txTime = OFDM_HALF_SIFS_TIME
+ OFDM_HALF_PREAMBLE_TIME
+ (numSymbols * OFDM_HALF_SYMBOL_TIME);
break;
case IEEE80211_T_OFDM_QUARTER:
bitsPerSymbol = (kbps * OFDM_QUARTER_SYMBOL_TIME) / 1000;
HALASSERT(bitsPerSymbol != 0);
numBits = OFDM_QUARTER_PLCP_BITS + (frameLen << 3);
numSymbols = howmany(numBits, bitsPerSymbol);
txTime = OFDM_QUARTER_SIFS_TIME
+ OFDM_QUARTER_PREAMBLE_TIME
+ (numSymbols * OFDM_QUARTER_SYMBOL_TIME);
break;
case IEEE80211_T_TURBO:
bitsPerSymbol = (kbps * TURBO_SYMBOL_TIME) / 1000;
HALASSERT(bitsPerSymbol != 0);
numBits = TURBO_PLCP_BITS + (frameLen << 3);
numSymbols = howmany(numBits, bitsPerSymbol);
txTime = TURBO_SIFS_TIME
+ TURBO_PREAMBLE_TIME
+ (numSymbols * TURBO_SYMBOL_TIME);
break;
default:
HALDEBUG(ah, HAL_DEBUG_PHYIO,
"%s: unknown phy %u (rate ix %u)\n",
__func__, rates->info[rateix].phy, rateix);
txTime = 0;
break;
}
return txTime;
}
int
ath_hal_get_curmode(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
/*
* Pick a default mode at bootup. A channel change is inevitable.
*/
if (!chan)
return HAL_MODE_11NG_HT20;
if (IEEE80211_IS_CHAN_TURBO(chan))
return HAL_MODE_TURBO;
/* check for NA_HT before plain A, since IS_CHAN_A includes NA_HT */
if (IEEE80211_IS_CHAN_5GHZ(chan) && IEEE80211_IS_CHAN_HT20(chan))
return HAL_MODE_11NA_HT20;
if (IEEE80211_IS_CHAN_5GHZ(chan) && IEEE80211_IS_CHAN_HT40U(chan))
return HAL_MODE_11NA_HT40PLUS;
if (IEEE80211_IS_CHAN_5GHZ(chan) && IEEE80211_IS_CHAN_HT40D(chan))
return HAL_MODE_11NA_HT40MINUS;
if (IEEE80211_IS_CHAN_A(chan))
return HAL_MODE_11A;
/* check for NG_HT before plain G, since IS_CHAN_G includes NG_HT */
if (IEEE80211_IS_CHAN_2GHZ(chan) && IEEE80211_IS_CHAN_HT20(chan))
return HAL_MODE_11NG_HT20;
if (IEEE80211_IS_CHAN_2GHZ(chan) && IEEE80211_IS_CHAN_HT40U(chan))
return HAL_MODE_11NG_HT40PLUS;
if (IEEE80211_IS_CHAN_2GHZ(chan) && IEEE80211_IS_CHAN_HT40D(chan))
return HAL_MODE_11NG_HT40MINUS;
/*
* XXX For FreeBSD, will this work correctly given the DYN
* chan mode (OFDM+CCK dynamic) ? We have pure-G versions DYN-BG..
*/
if (IEEE80211_IS_CHAN_G(chan))
return HAL_MODE_11G;
if (IEEE80211_IS_CHAN_B(chan))
return HAL_MODE_11B;
HALASSERT(0);
return HAL_MODE_11NG_HT20;
}
typedef enum {
WIRELESS_MODE_11a = 0,
WIRELESS_MODE_TURBO = 1,
WIRELESS_MODE_11b = 2,
WIRELESS_MODE_11g = 3,
WIRELESS_MODE_108g = 4,
WIRELESS_MODE_MAX
} WIRELESS_MODE;
static WIRELESS_MODE
ath_hal_chan2wmode(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
if (IEEE80211_IS_CHAN_B(chan))
return WIRELESS_MODE_11b;
if (IEEE80211_IS_CHAN_G(chan))
return WIRELESS_MODE_11g;
if (IEEE80211_IS_CHAN_108G(chan))
return WIRELESS_MODE_108g;
if (IEEE80211_IS_CHAN_TURBO(chan))
return WIRELESS_MODE_TURBO;
return WIRELESS_MODE_11a;
}
/*
* Convert between microseconds and core system clocks.
*/
/* 11a Turbo 11b 11g 108g */
static const uint8_t CLOCK_RATE[] = { 40, 80, 22, 44, 88 };
#define CLOCK_FAST_RATE_5GHZ_OFDM 44
u_int
ath_hal_mac_clks(struct ath_hal *ah, u_int usecs)
{
const struct ieee80211_channel *c = AH_PRIVATE(ah)->ah_curchan;
u_int clks;
/* NB: ah_curchan may be null when called attach time */
/* XXX merlin and later specific workaround - 5ghz fast clock is 44 */
if (c != AH_NULL && IS_5GHZ_FAST_CLOCK_EN(ah, c)) {
clks = usecs * CLOCK_FAST_RATE_5GHZ_OFDM;
if (IEEE80211_IS_CHAN_HT40(c))
clks <<= 1;
} else if (c != AH_NULL) {
clks = usecs * CLOCK_RATE[ath_hal_chan2wmode(ah, c)];
if (IEEE80211_IS_CHAN_HT40(c))
clks <<= 1;
} else
clks = usecs * CLOCK_RATE[WIRELESS_MODE_11b];
return clks;
}
u_int
ath_hal_mac_usec(struct ath_hal *ah, u_int clks)
{
const struct ieee80211_channel *c = AH_PRIVATE(ah)->ah_curchan;
u_int usec;
/* NB: ah_curchan may be null when called attach time */
/* XXX merlin and later specific workaround - 5ghz fast clock is 44 */
if (c != AH_NULL && IS_5GHZ_FAST_CLOCK_EN(ah, c)) {
usec = clks / CLOCK_FAST_RATE_5GHZ_OFDM;
if (IEEE80211_IS_CHAN_HT40(c))
usec >>= 1;
} else if (c != AH_NULL) {
usec = clks / CLOCK_RATE[ath_hal_chan2wmode(ah, c)];
if (IEEE80211_IS_CHAN_HT40(c))
usec >>= 1;
} else
usec = clks / CLOCK_RATE[WIRELESS_MODE_11b];
return usec;
}
/*
* Setup a h/w rate table's reverse lookup table and
* fill in ack durations. This routine is called for
* each rate table returned through the ah_getRateTable
* method. The reverse lookup tables are assumed to be
* initialized to zero (or at least the first entry).
* We use this as a key that indicates whether or not
* we've previously setup the reverse lookup table.
*
* XXX not reentrant, but shouldn't matter
*/
void
ath_hal_setupratetable(struct ath_hal *ah, HAL_RATE_TABLE *rt)
{
#define N(a) (sizeof(a)/sizeof(a[0]))
int i;
if (rt->rateCodeToIndex[0] != 0) /* already setup */
return;
for (i = 0; i < N(rt->rateCodeToIndex); i++)
rt->rateCodeToIndex[i] = (uint8_t) -1;
for (i = 0; i < rt->rateCount; i++) {
uint8_t code = rt->info[i].rateCode;
uint8_t cix = rt->info[i].controlRate;
HALASSERT(code < N(rt->rateCodeToIndex));
rt->rateCodeToIndex[code] = i;
HALASSERT((code | rt->info[i].shortPreamble) <
N(rt->rateCodeToIndex));
rt->rateCodeToIndex[code | rt->info[i].shortPreamble] = i;
/*
* XXX for 11g the control rate to use for 5.5 and 11 Mb/s
* depends on whether they are marked as basic rates;
* the static tables are setup with an 11b-compatible
* 2Mb/s rate which will work but is suboptimal
*/
rt->info[i].lpAckDuration = ath_hal_computetxtime(ah, rt,
WLAN_CTRL_FRAME_SIZE, cix, AH_FALSE);
rt->info[i].spAckDuration = ath_hal_computetxtime(ah, rt,
WLAN_CTRL_FRAME_SIZE, cix, AH_TRUE);
}
#undef N
}
HAL_STATUS
ath_hal_getcapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
uint32_t capability, uint32_t *result)
{
const HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
switch (type) {
case HAL_CAP_REG_DMN: /* regulatory domain */
*result = AH_PRIVATE(ah)->ah_currentRD;
return HAL_OK;
case HAL_CAP_DFS_DMN: /* DFS Domain */
*result = AH_PRIVATE(ah)->ah_dfsDomain;
return HAL_OK;
case HAL_CAP_CIPHER: /* cipher handled in hardware */
case HAL_CAP_TKIP_MIC: /* handle TKIP MIC in hardware */
return HAL_ENOTSUPP;
case HAL_CAP_TKIP_SPLIT: /* hardware TKIP uses split keys */
return HAL_ENOTSUPP;
case HAL_CAP_PHYCOUNTERS: /* hardware PHY error counters */
return pCap->halHwPhyCounterSupport ? HAL_OK : HAL_ENXIO;
case HAL_CAP_WME_TKIPMIC: /* hardware can do TKIP MIC when WMM is turned on */
return HAL_ENOTSUPP;
case HAL_CAP_DIVERSITY: /* hardware supports fast diversity */
return HAL_ENOTSUPP;
case HAL_CAP_KEYCACHE_SIZE: /* hardware key cache size */
*result = pCap->halKeyCacheSize;
return HAL_OK;
case HAL_CAP_NUM_TXQUEUES: /* number of hardware tx queues */
*result = pCap->halTotalQueues;
return HAL_OK;
case HAL_CAP_VEOL: /* hardware supports virtual EOL */
return pCap->halVEOLSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_PSPOLL: /* hardware PS-Poll support works */
return pCap->halPSPollBroken ? HAL_ENOTSUPP : HAL_OK;
case HAL_CAP_COMPRESSION:
return pCap->halCompressSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_BURST:
return pCap->halBurstSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_FASTFRAME:
return pCap->halFastFramesSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_DIAG: /* hardware diagnostic support */
*result = AH_PRIVATE(ah)->ah_diagreg;
return HAL_OK;
case HAL_CAP_TXPOW: /* global tx power limit */
switch (capability) {
case 0: /* facility is supported */
return HAL_OK;
case 1: /* current limit */
*result = AH_PRIVATE(ah)->ah_powerLimit;
return HAL_OK;
case 2: /* current max tx power */
*result = AH_PRIVATE(ah)->ah_maxPowerLevel;
return HAL_OK;
case 3: /* scale factor */
*result = AH_PRIVATE(ah)->ah_tpScale;
return HAL_OK;
}
return HAL_ENOTSUPP;
case HAL_CAP_BSSIDMASK: /* hardware supports bssid mask */
return pCap->halBssIdMaskSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_MCAST_KEYSRCH: /* multicast frame keycache search */
return pCap->halMcastKeySrchSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_TSF_ADJUST: /* hardware has beacon tsf adjust */
return HAL_ENOTSUPP;
case HAL_CAP_RFSILENT: /* rfsilent support */
switch (capability) {
case 0: /* facility is supported */
return pCap->halRfSilentSupport ? HAL_OK : HAL_ENOTSUPP;
case 1: /* current setting */
return AH_PRIVATE(ah)->ah_rfkillEnabled ?
HAL_OK : HAL_ENOTSUPP;
case 2: /* rfsilent config */
*result = AH_PRIVATE(ah)->ah_rfsilent;
return HAL_OK;
}
return HAL_ENOTSUPP;
case HAL_CAP_11D:
return HAL_OK;
case HAL_CAP_HT:
return pCap->halHTSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_GTXTO:
return pCap->halGTTSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_FAST_CC:
return pCap->halFastCCSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_TX_CHAINMASK: /* mask of TX chains supported */
*result = pCap->halTxChainMask;
return HAL_OK;
case HAL_CAP_RX_CHAINMASK: /* mask of RX chains supported */
*result = pCap->halRxChainMask;
return HAL_OK;
case HAL_CAP_NUM_GPIO_PINS:
*result = pCap->halNumGpioPins;
return HAL_OK;
case HAL_CAP_CST:
return pCap->halCSTSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_RTS_AGGR_LIMIT:
*result = pCap->halRtsAggrLimit;
return HAL_OK;
case HAL_CAP_4ADDR_AGGR:
return pCap->hal4AddrAggrSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_EXT_CHAN_DFS:
return pCap->halExtChanDfsSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_COMBINED_RADAR_RSSI:
return pCap->halUseCombinedRadarRssi ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_AUTO_SLEEP:
return pCap->halAutoSleepSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_MBSSID_AGGR_SUPPORT:
return pCap->halMbssidAggrSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_SPLIT_4KB_TRANS: /* hardware handles descriptors straddling 4k page boundary */
return pCap->hal4kbSplitTransSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_REG_FLAG:
*result = AH_PRIVATE(ah)->ah_currentRDext;
return HAL_OK;
case HAL_CAP_ENHANCED_DMA_SUPPORT:
return pCap->halEnhancedDmaSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_NUM_TXMAPS:
*result = pCap->halNumTxMaps;
return HAL_OK;
case HAL_CAP_TXDESCLEN:
*result = pCap->halTxDescLen;
return HAL_OK;
case HAL_CAP_TXSTATUSLEN:
*result = pCap->halTxStatusLen;
return HAL_OK;
case HAL_CAP_RXSTATUSLEN:
*result = pCap->halRxStatusLen;
return HAL_OK;
case HAL_CAP_RXFIFODEPTH:
switch (capability) {
case HAL_RX_QUEUE_HP:
*result = pCap->halRxHpFifoDepth;
return HAL_OK;
case HAL_RX_QUEUE_LP:
*result = pCap->halRxLpFifoDepth;
return HAL_OK;
default:
return HAL_ENOTSUPP;
}
case HAL_CAP_RXBUFSIZE:
case HAL_CAP_NUM_MR_RETRIES:
*result = pCap->halNumMRRetries;
return HAL_OK;
case HAL_CAP_BT_COEX:
return pCap->halBtCoexSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_HT20_SGI:
return pCap->halHTSGI20Support ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_RXTSTAMP_PREC: /* rx desc tstamp precision (bits) */
*result = pCap->halTstampPrecision;
return HAL_OK;
case HAL_CAP_ENHANCED_DFS_SUPPORT:
return pCap->halEnhancedDfsSupport ? HAL_OK : HAL_ENOTSUPP;
/* FreeBSD-specific entries for now */
case HAL_CAP_RXORN_FATAL: /* HAL_INT_RXORN treated as fatal */
return AH_PRIVATE(ah)->ah_rxornIsFatal ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_INTRMASK: /* mask of supported interrupts */
*result = pCap->halIntrMask;
return HAL_OK;
case HAL_CAP_BSSIDMATCH: /* hardware has disable bssid match */
return pCap->halBssidMatchSupport ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_STREAMS: /* number of 11n spatial streams */
switch (capability) {
case 0: /* TX */
*result = pCap->halTxStreams;
return HAL_OK;
case 1: /* RX */
*result = pCap->halRxStreams;
return HAL_OK;
default:
return HAL_ENOTSUPP;
}
case HAL_CAP_RXDESC_SELFLINK: /* hardware supports self-linked final RX descriptors correctly */
return pCap->halHasRxSelfLinkedTail ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_LONG_RXDESC_TSF: /* 32 bit TSF in RX descriptor? */
return pCap->halHasLongRxDescTsf ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_BB_READ_WAR: /* Baseband read WAR */
return pCap->halHasBBReadWar? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_SERIALISE_WAR: /* PCI register serialisation */
return pCap->halSerialiseRegWar ? HAL_OK : HAL_ENOTSUPP;
case HAL_CAP_MFP: /* Management frame protection setting */
*result = pCap->halMfpSupport;
return HAL_OK;
default:
return HAL_EINVAL;
}
}
HAL_BOOL
ath_hal_setcapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
uint32_t capability, uint32_t setting, HAL_STATUS *status)
{
switch (type) {
case HAL_CAP_TXPOW:
switch (capability) {
case 3:
if (setting <= HAL_TP_SCALE_MIN) {
AH_PRIVATE(ah)->ah_tpScale = setting;
return AH_TRUE;
}
break;
}
break;
case HAL_CAP_RFSILENT: /* rfsilent support */
/*
* NB: allow even if halRfSilentSupport is false
* in case the EEPROM is misprogrammed.
*/
switch (capability) {
case 1: /* current setting */
AH_PRIVATE(ah)->ah_rfkillEnabled = (setting != 0);
return AH_TRUE;
case 2: /* rfsilent config */
/* XXX better done per-chip for validation? */
AH_PRIVATE(ah)->ah_rfsilent = setting;
return AH_TRUE;
}
break;
case HAL_CAP_REG_DMN: /* regulatory domain */
AH_PRIVATE(ah)->ah_currentRD = setting;
return AH_TRUE;
case HAL_CAP_RXORN_FATAL: /* HAL_INT_RXORN treated as fatal */
AH_PRIVATE(ah)->ah_rxornIsFatal = setting;
return AH_TRUE;
default:
break;
}
if (status)
*status = HAL_EINVAL;
return AH_FALSE;
}
/*
* Common support for getDiagState method.
*/
static u_int
ath_hal_getregdump(struct ath_hal *ah, const HAL_REGRANGE *regs,
void *dstbuf, int space)
{
uint32_t *dp = dstbuf;
int i;
for (i = 0; space >= 2*sizeof(uint32_t); i++) {
u_int r = regs[i].start;
u_int e = regs[i].end;
*dp++ = (r<<16) | e;
space -= sizeof(uint32_t);
do {
*dp++ = OS_REG_READ(ah, r);
r += sizeof(uint32_t);
space -= sizeof(uint32_t);
} while (r <= e && space >= sizeof(uint32_t));
}
return (char *) dp - (char *) dstbuf;
}
static void
ath_hal_setregs(struct ath_hal *ah, const HAL_REGWRITE *regs, int space)
{
while (space >= sizeof(HAL_REGWRITE)) {
OS_REG_WRITE(ah, regs->addr, regs->value);
regs++, space -= sizeof(HAL_REGWRITE);
}
}
HAL_BOOL
ath_hal_getdiagstate(struct ath_hal *ah, int request,
const void *args, uint32_t argsize,
void **result, uint32_t *resultsize)
{
switch (request) {
case HAL_DIAG_REVS:
*result = &AH_PRIVATE(ah)->ah_devid;
*resultsize = sizeof(HAL_REVS);
return AH_TRUE;
case HAL_DIAG_REGS:
*resultsize = ath_hal_getregdump(ah, args, *result,*resultsize);
return AH_TRUE;
case HAL_DIAG_SETREGS:
ath_hal_setregs(ah, args, argsize);
*resultsize = 0;
return AH_TRUE;
case HAL_DIAG_FATALERR:
*result = &AH_PRIVATE(ah)->ah_fatalState[0];
*resultsize = sizeof(AH_PRIVATE(ah)->ah_fatalState);
return AH_TRUE;
case HAL_DIAG_EEREAD:
if (argsize != sizeof(uint16_t))
return AH_FALSE;
if (!ath_hal_eepromRead(ah, *(const uint16_t *)args, *result))
return AH_FALSE;
*resultsize = sizeof(uint16_t);
return AH_TRUE;
#ifdef AH_PRIVATE_DIAG
case HAL_DIAG_SETKEY: {
const HAL_DIAG_KEYVAL *dk;
if (argsize != sizeof(HAL_DIAG_KEYVAL))
return AH_FALSE;
dk = (const HAL_DIAG_KEYVAL *)args;
return ah->ah_setKeyCacheEntry(ah, dk->dk_keyix,
&dk->dk_keyval, dk->dk_mac, dk->dk_xor);
}
case HAL_DIAG_RESETKEY:
if (argsize != sizeof(uint16_t))
return AH_FALSE;
return ah->ah_resetKeyCacheEntry(ah, *(const uint16_t *)args);
#ifdef AH_SUPPORT_WRITE_EEPROM
case HAL_DIAG_EEWRITE: {
const HAL_DIAG_EEVAL *ee;
if (argsize != sizeof(HAL_DIAG_EEVAL))
return AH_FALSE;
ee = (const HAL_DIAG_EEVAL *)args;
return ath_hal_eepromWrite(ah, ee->ee_off, ee->ee_data);
}
#endif /* AH_SUPPORT_WRITE_EEPROM */
#endif /* AH_PRIVATE_DIAG */
case HAL_DIAG_11NCOMPAT:
if (argsize == 0) {
*resultsize = sizeof(uint32_t);
*((uint32_t *)(*result)) =
AH_PRIVATE(ah)->ah_11nCompat;
} else if (argsize == sizeof(uint32_t)) {
AH_PRIVATE(ah)->ah_11nCompat = *(const uint32_t *)args;
} else
return AH_FALSE;
return AH_TRUE;
}
return AH_FALSE;
}
/*
* Set the properties of the tx queue with the parameters
* from qInfo.
*/
HAL_BOOL
ath_hal_setTxQProps(struct ath_hal *ah,
HAL_TX_QUEUE_INFO *qi, const HAL_TXQ_INFO *qInfo)
{
uint32_t cw;
if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
HALDEBUG(ah, HAL_DEBUG_TXQUEUE,
"%s: inactive queue\n", __func__);
return AH_FALSE;
}
/* XXX validate parameters */
qi->tqi_ver = qInfo->tqi_ver;
qi->tqi_subtype = qInfo->tqi_subtype;
qi->tqi_qflags = qInfo->tqi_qflags;
qi->tqi_priority = qInfo->tqi_priority;
if (qInfo->tqi_aifs != HAL_TXQ_USEDEFAULT)
qi->tqi_aifs = AH_MIN(qInfo->tqi_aifs, 255);
else
qi->tqi_aifs = INIT_AIFS;
if (qInfo->tqi_cwmin != HAL_TXQ_USEDEFAULT) {
cw = AH_MIN(qInfo->tqi_cwmin, 1024);
/* make sure that the CWmin is of the form (2^n - 1) */
qi->tqi_cwmin = 1;
while (qi->tqi_cwmin < cw)
qi->tqi_cwmin = (qi->tqi_cwmin << 1) | 1;
} else
qi->tqi_cwmin = qInfo->tqi_cwmin;
if (qInfo->tqi_cwmax != HAL_TXQ_USEDEFAULT) {
cw = AH_MIN(qInfo->tqi_cwmax, 1024);
/* make sure that the CWmax is of the form (2^n - 1) */
qi->tqi_cwmax = 1;
while (qi->tqi_cwmax < cw)
qi->tqi_cwmax = (qi->tqi_cwmax << 1) | 1;
} else
qi->tqi_cwmax = INIT_CWMAX;
/* Set retry limit values */
if (qInfo->tqi_shretry != 0)
qi->tqi_shretry = AH_MIN(qInfo->tqi_shretry, 15);
else
qi->tqi_shretry = INIT_SH_RETRY;
if (qInfo->tqi_lgretry != 0)
qi->tqi_lgretry = AH_MIN(qInfo->tqi_lgretry, 15);
else
qi->tqi_lgretry = INIT_LG_RETRY;
qi->tqi_cbrPeriod = qInfo->tqi_cbrPeriod;
qi->tqi_cbrOverflowLimit = qInfo->tqi_cbrOverflowLimit;
qi->tqi_burstTime = qInfo->tqi_burstTime;
qi->tqi_readyTime = qInfo->tqi_readyTime;
switch (qInfo->tqi_subtype) {
case HAL_WME_UPSD:
if (qi->tqi_type == HAL_TX_QUEUE_DATA)
qi->tqi_intFlags = HAL_TXQ_USE_LOCKOUT_BKOFF_DIS;
break;
default:
break; /* NB: silence compiler */
}
return AH_TRUE;
}
HAL_BOOL
ath_hal_getTxQProps(struct ath_hal *ah,
HAL_TXQ_INFO *qInfo, const HAL_TX_QUEUE_INFO *qi)
{
if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
HALDEBUG(ah, HAL_DEBUG_TXQUEUE,
"%s: inactive queue\n", __func__);
return AH_FALSE;
}
qInfo->tqi_qflags = qi->tqi_qflags;
qInfo->tqi_ver = qi->tqi_ver;
qInfo->tqi_subtype = qi->tqi_subtype;
qInfo->tqi_qflags = qi->tqi_qflags;
qInfo->tqi_priority = qi->tqi_priority;
qInfo->tqi_aifs = qi->tqi_aifs;
qInfo->tqi_cwmin = qi->tqi_cwmin;
qInfo->tqi_cwmax = qi->tqi_cwmax;
qInfo->tqi_shretry = qi->tqi_shretry;
qInfo->tqi_lgretry = qi->tqi_lgretry;
qInfo->tqi_cbrPeriod = qi->tqi_cbrPeriod;
qInfo->tqi_cbrOverflowLimit = qi->tqi_cbrOverflowLimit;
qInfo->tqi_burstTime = qi->tqi_burstTime;
qInfo->tqi_readyTime = qi->tqi_readyTime;
return AH_TRUE;
}
/* 11a Turbo 11b 11g 108g */
static const int16_t NOISE_FLOOR[] = { -96, -93, -98, -96, -93 };
/*
* Read the current channel noise floor and return.
* If nf cal hasn't finished, channel noise floor should be 0
* and we return a nominal value based on band and frequency.
*
* NB: This is a private routine used by per-chip code to
* implement the ah_getChanNoise method.
*/
int16_t
ath_hal_getChanNoise(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
HAL_CHANNEL_INTERNAL *ichan;
ichan = ath_hal_checkchannel(ah, chan);
if (ichan == AH_NULL) {
HALDEBUG(ah, HAL_DEBUG_NFCAL,
"%s: invalid channel %u/0x%x; no mapping\n",
__func__, chan->ic_freq, chan->ic_flags);
return 0;
}
if (ichan->rawNoiseFloor == 0) {
WIRELESS_MODE mode = ath_hal_chan2wmode(ah, chan);
HALASSERT(mode < WIRELESS_MODE_MAX);
return NOISE_FLOOR[mode] + ath_hal_getNfAdjust(ah, ichan);
} else
return ichan->rawNoiseFloor + ichan->noiseFloorAdjust;
}
/*
* Fetch the current setup of ctl/ext noise floor values.
*
* If the CHANNEL_MIMO_NF_VALID flag isn't set, the array is simply
* populated with values from NOISE_FLOOR[] + ath_hal_getNfAdjust().
*
* The caller must supply ctl/ext NF arrays which are at least
* AH_MIMO_MAX_CHAINS entries long.
*/
int
ath_hal_get_mimo_chan_noise(struct ath_hal *ah,
const struct ieee80211_channel *chan, int16_t *nf_ctl,
int16_t *nf_ext)
{
#ifdef AH_SUPPORT_AR5416
HAL_CHANNEL_INTERNAL *ichan;
int i;
ichan = ath_hal_checkchannel(ah, chan);
if (ichan == AH_NULL) {
HALDEBUG(ah, HAL_DEBUG_NFCAL,
"%s: invalid channel %u/0x%x; no mapping\n",
__func__, chan->ic_freq, chan->ic_flags);
for (i = 0; i < AH_MIMO_MAX_CHAINS; i++) {
nf_ctl[i] = nf_ext[i] = 0;
}
return 0;
}
/* Return 0 if there's no valid MIMO values (yet) */
if (! (ichan->privFlags & CHANNEL_MIMO_NF_VALID)) {
for (i = 0; i < AH_MIMO_MAX_CHAINS; i++) {
nf_ctl[i] = nf_ext[i] = 0;
}
return 0;
}
if (ichan->rawNoiseFloor == 0) {
WIRELESS_MODE mode = ath_hal_chan2wmode(ah, chan);
HALASSERT(mode < WIRELESS_MODE_MAX);
/*
* See the comment below - this could cause issues for
* stations which have a very low RSSI, below the
* 'normalised' NF values in NOISE_FLOOR[].
*/
for (i = 0; i < AH_MIMO_MAX_CHAINS; i++) {
nf_ctl[i] = nf_ext[i] = NOISE_FLOOR[mode] +
ath_hal_getNfAdjust(ah, ichan);
}
return 1;
} else {
/*
* The value returned here from a MIMO radio is presumed to be
* "good enough" as a NF calculation. As RSSI values are calculated
* against this, an adjusted NF may be higher than the RSSI value
* returned from a vary weak station, resulting in an obscenely
* high signal strength calculation being returned.
*
* This should be re-evaluated at a later date, along with any
* signal strength calculations which are made. Quite likely the
* RSSI values will need to be adjusted to ensure the calculations
* don't "wrap" when RSSI is less than the "adjusted" NF value.
* ("Adjust" here is via ichan->noiseFloorAdjust.)
*/
for (i = 0; i < AH_MIMO_MAX_CHAINS; i++) {
nf_ctl[i] = ichan->noiseFloorCtl[i] + ath_hal_getNfAdjust(ah, ichan);
nf_ext[i] = ichan->noiseFloorExt[i] + ath_hal_getNfAdjust(ah, ichan);
}
return 1;
}
#else
return 0;
#endif /* AH_SUPPORT_AR5416 */
}
/*
* Process all valid raw noise floors into the dBm noise floor values.
* Though our device has no reference for a dBm noise floor, we perform
* a relative minimization of NF's based on the lowest NF found across a
* channel scan.
*/
void
ath_hal_process_noisefloor(struct ath_hal *ah)
{
HAL_CHANNEL_INTERNAL *c;
int16_t correct2, correct5;
int16_t lowest2, lowest5;
int i;
/*
* Find the lowest 2GHz and 5GHz noise floor values after adjusting
* for statistically recorded NF/channel deviation.
*/
correct2 = lowest2 = 0;
correct5 = lowest5 = 0;
for (i = 0; i < AH_PRIVATE(ah)->ah_nchan; i++) {
WIRELESS_MODE mode;
int16_t nf;
c = &AH_PRIVATE(ah)->ah_channels[i];
if (c->rawNoiseFloor >= 0)
continue;
/* XXX can't identify proper mode */
mode = IS_CHAN_5GHZ(c) ? WIRELESS_MODE_11a : WIRELESS_MODE_11g;
nf = c->rawNoiseFloor + NOISE_FLOOR[mode] +
ath_hal_getNfAdjust(ah, c);
if (IS_CHAN_5GHZ(c)) {
if (nf < lowest5) {
lowest5 = nf;
correct5 = NOISE_FLOOR[mode] -
(c->rawNoiseFloor + ath_hal_getNfAdjust(ah, c));
}
} else {
if (nf < lowest2) {
lowest2 = nf;
correct2 = NOISE_FLOOR[mode] -
(c->rawNoiseFloor + ath_hal_getNfAdjust(ah, c));
}
}
}
/* Correct the channels to reach the expected NF value */
for (i = 0; i < AH_PRIVATE(ah)->ah_nchan; i++) {
c = &AH_PRIVATE(ah)->ah_channels[i];
if (c->rawNoiseFloor >= 0)
continue;
/* Apply correction factor */
c->noiseFloorAdjust = ath_hal_getNfAdjust(ah, c) +
(IS_CHAN_5GHZ(c) ? correct5 : correct2);
HALDEBUG(ah, HAL_DEBUG_NFCAL, "%u raw nf %d adjust %d\n",
c->channel, c->rawNoiseFloor, c->noiseFloorAdjust);
}
}
/*
* INI support routines.
*/
int
ath_hal_ini_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
int col, int regWr)
{
int r;
HALASSERT(col < ia->cols);
for (r = 0; r < ia->rows; r++) {
OS_REG_WRITE(ah, HAL_INI_VAL(ia, r, 0),
HAL_INI_VAL(ia, r, col));
/* Analog shift register delay seems needed for Merlin - PR kern/154220 */
if (HAL_INI_VAL(ia, r, 0) >= 0x7800 && HAL_INI_VAL(ia, r, 0) < 0x7900)
OS_DELAY(100);
DMA_YIELD(regWr);
}
return regWr;
}
void
ath_hal_ini_bank_setup(uint32_t data[], const HAL_INI_ARRAY *ia, int col)
{
int r;
HALASSERT(col < ia->cols);
for (r = 0; r < ia->rows; r++)
data[r] = HAL_INI_VAL(ia, r, col);
}
int
ath_hal_ini_bank_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
const uint32_t data[], int regWr)
{
int r;
for (r = 0; r < ia->rows; r++) {
OS_REG_WRITE(ah, HAL_INI_VAL(ia, r, 0), data[r]);
DMA_YIELD(regWr);
}
return regWr;
}
/*
* These are EEPROM board related routines which should likely live in
* a helper library of some sort.
*/
/**************************************************************
* ath_ee_getLowerUppderIndex
*
* Return indices surrounding the value in sorted integer lists.
* Requirement: the input list must be monotonically increasing
* and populated up to the list size
* Returns: match is set if an index in the array matches exactly
* or a the target is before or after the range of the array.
*/
HAL_BOOL
ath_ee_getLowerUpperIndex(uint8_t target, uint8_t *pList, uint16_t listSize,
uint16_t *indexL, uint16_t *indexR)
{
uint16_t i;
/*
* Check first and last elements for beyond ordered array cases.
*/
if (target <= pList[0]) {
*indexL = *indexR = 0;
return AH_TRUE;
}
if (target >= pList[listSize-1]) {
*indexL = *indexR = (uint16_t)(listSize - 1);
return AH_TRUE;
}
/* look for value being near or between 2 values in list */
for (i = 0; i < listSize - 1; i++) {
/*
* If value is close to the current value of the list
* then target is not between values, it is one of the values
*/
if (pList[i] == target) {
*indexL = *indexR = i;
return AH_TRUE;
}
/*
* Look for value being between current value and next value
* if so return these 2 values
*/
if (target < pList[i + 1]) {
*indexL = i;
*indexR = (uint16_t)(i + 1);
return AH_FALSE;
}
}
HALASSERT(0);
*indexL = *indexR = 0;
return AH_FALSE;
}
/**************************************************************
* ath_ee_FillVpdTable
*
* Fill the Vpdlist for indices Pmax-Pmin
* Note: pwrMin, pwrMax and Vpdlist are all in dBm * 4
*/
HAL_BOOL
ath_ee_FillVpdTable(uint8_t pwrMin, uint8_t pwrMax, uint8_t *pPwrList,
uint8_t *pVpdList, uint16_t numIntercepts, uint8_t *pRetVpdList)
{
uint16_t i, k;
uint8_t currPwr = pwrMin;
uint16_t idxL, idxR;
HALASSERT(pwrMax > pwrMin);
for (i = 0; i <= (pwrMax - pwrMin) / 2; i++) {
ath_ee_getLowerUpperIndex(currPwr, pPwrList, numIntercepts,
&(idxL), &(idxR));
if (idxR < 1)
idxR = 1; /* extrapolate below */
if (idxL == numIntercepts - 1)
idxL = (uint16_t)(numIntercepts - 2); /* extrapolate above */
if (pPwrList[idxL] == pPwrList[idxR])
k = pVpdList[idxL];
else
k = (uint16_t)( ((currPwr - pPwrList[idxL]) * pVpdList[idxR] + (pPwrList[idxR] - currPwr) * pVpdList[idxL]) /
(pPwrList[idxR] - pPwrList[idxL]) );
HALASSERT(k < 256);
pRetVpdList[i] = (uint8_t)k;
currPwr += 2; /* half dB steps */
}
return AH_TRUE;
}
/**************************************************************************
* ath_ee_interpolate
*
* Returns signed interpolated or the scaled up interpolated value
*/
int16_t
ath_ee_interpolate(uint16_t target, uint16_t srcLeft, uint16_t srcRight,
int16_t targetLeft, int16_t targetRight)
{
int16_t rv;
if (srcRight == srcLeft) {
rv = targetLeft;
} else {
rv = (int16_t)( ((target - srcLeft) * targetRight +
(srcRight - target) * targetLeft) / (srcRight - srcLeft) );
}
return rv;
}
/*
* Adjust the TSF.
*/
void
ath_hal_adjusttsf(struct ath_hal *ah, int32_t tsfdelta)
{
/* XXX handle wrap/overflow */
OS_REG_WRITE(ah, AR_TSF_L32, OS_REG_READ(ah, AR_TSF_L32) + tsfdelta);
}
/*
* Enable or disable CCA.
*/
void
ath_hal_setcca(struct ath_hal *ah, int ena)
{
/*
* NB: fill me in; this is not provided by default because disabling
* CCA in most locales violates regulatory.
*/
}
/*
* Get CCA setting.
*/
int
ath_hal_getcca(struct ath_hal *ah)
{
u_int32_t diag;
if (ath_hal_getcapability(ah, HAL_CAP_DIAG, 0, &diag) != HAL_OK)
return 1;
return ((diag & 0x500000) == 0);
}
/*
* This routine is only needed when supporting EEPROM-in-RAM setups
* (eg embedded SoCs and on-board PCI/PCIe devices.)
*/
/* NB: This is in 16 bit words; not bytes */
/* XXX This doesn't belong here! */
#define ATH_DATA_EEPROM_SIZE 2048
HAL_BOOL
ath_hal_EepromDataRead(struct ath_hal *ah, u_int off, uint16_t *data)
{
if (ah->ah_eepromdata == AH_NULL) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: no eeprom data!\n", __func__);
return AH_FALSE;
}
if (off > ATH_DATA_EEPROM_SIZE) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: offset %x > %x\n",
__func__, off, ATH_DATA_EEPROM_SIZE);
return AH_FALSE;
}
(*data) = ah->ah_eepromdata[off];
return AH_TRUE;
}
Reference in New Issue View Git Blame Copy Permalink