8c2676b7e0
The Tp-link Archer-C7v2 unit has a QCA9558 internally but hangs the QCA988x 11ac PCIe NIC off of PCI RC #1, not #0. So I actually finally /do/ have a board to verify whether PCIe is working. Grr. Tested: * TP-Link Archer-C7v2.
82 lines
1.9 KiB
Plaintext
82 lines
1.9 KiB
Plaintext
# This file (and the kernel config file accompanying it) are not designed
|
|
# to be used by themselves. Instead, users of this file should create a
|
|
# kernel config file which includes this file (which gets the basic hints),
|
|
# then override the default options (adding devices as needed) and adding
|
|
# hints as needed (for example, the GPIO and LAN PHY.)
|
|
|
|
# $FreeBSD$
|
|
|
|
hint.apb.0.at="nexus0"
|
|
# The default APB is on IP6 (irq4); we need to add
|
|
# the two new ones (IP2, IP3) to this and extend
|
|
# the irq ranges appropriately.
|
|
hint.apb.0.irq=4
|
|
|
|
# uart0
|
|
hint.uart.0.at="apb0"
|
|
# NB: This isn't an ns8250 UART
|
|
hint.uart.0.maddr=0x18020003
|
|
hint.uart.0.msize=0x18
|
|
hint.uart.0.irq=3
|
|
|
|
# ehci - on IP3
|
|
hint.ehci.0.at="nexus0"
|
|
hint.ehci.0.maddr=0x1b000100
|
|
hint.ehci.0.msize=0x00001000
|
|
hint.ehci.0.irq=1
|
|
|
|
hint.ehci.1.at="nexus0"
|
|
hint.ehci.1.maddr=0x1b400100
|
|
hint.ehci.1.msize=0x00001000
|
|
hint.ehci.1.irq=1
|
|
|
|
# PCIe 1: qca955x_int0 (IP2)
|
|
|
|
# pci - XXX no maddr/msize, grr!
|
|
hint.pcib.0.at="nexus0"
|
|
hint.pcib.0.irq=0
|
|
|
|
# PCIe 1: qca955x_int1 (IP3)
|
|
hint.pcib.1.at="nexus0"
|
|
hint.pcib.1.irq=1
|
|
|
|
# IP4
|
|
hint.arge.0.at="nexus0"
|
|
hint.arge.0.maddr=0x19000000
|
|
hint.arge.0.msize=0x1000
|
|
hint.arge.0.irq=2
|
|
|
|
# IP5
|
|
hint.arge.1.at="nexus0"
|
|
hint.arge.1.maddr=0x1a000000
|
|
hint.arge.1.msize=0x1000
|
|
hint.arge.1.irq=3
|
|
|
|
# ath0 - connected via IP2 mux
|
|
hint.ath.0.at="nexus0"
|
|
hint.ath.0.maddr=0x18100000
|
|
hint.ath.0.msize=0x20000
|
|
hint.ath.0.irq=0
|
|
hint.ath.0.vendor_id=0x168c
|
|
hint.ath.0.device_id=0x0039
|
|
# Set this to define where the ath calibration data
|
|
# should be fetched from in physical memory.
|
|
# hint.ath.0.eepromaddr=0x1fff1000
|
|
|
|
# SPI flash
|
|
hint.spi.0.at="nexus0"
|
|
hint.spi.0.maddr=0x1f000000
|
|
hint.spi.0.msize=0x10
|
|
|
|
hint.mx25l.0.at="spibus0"
|
|
hint.mx25l.0.cs=0
|
|
|
|
# Watchdog
|
|
hint.ar71xx_wdog.0.at="nexus0"
|
|
|
|
# The GPIO function and pin mask is configured per-board
|
|
hint.gpio.0.at="apb0"
|
|
hint.gpio.0.maddr=0x18040000
|
|
hint.gpio.0.msize=0x1000
|
|
hint.gpio.0.irq=2
|