d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
221ac8f4cd
freebsd-skq/sys/conf/kern.post.mk
Ed Maste 08d0704d74 Switch reproducible builds to unmodified src tree mode 
newvers.sh supports two modes for reproducible builds:

 -r    Reproducible build.  Do not embed directory names, user
       names, time stamps or other dynamic information into
       the output file.  This is intended to allow two builds
       done at different times and even by different people on
       different hosts to produce identical output.

 -R    Reproducible build if the tree represents an unmodified
       checkout from a version control system.  Metadata is
       included if the tree is modified.

Switch to the second mode when reproducible builds are enabled.
The value of a reproducible build is much less when building from an
uncontrolled, modified src tree, and -R likely provides the best
compromise in allowing the REPRODUCIBLE_BUILD knob to be enabled by
default for the release.

Approved by:	re (kib)
Sponsored by:	The FreeBSD Foundation
2018-09-11 19:19:07 +00:00

429 lines
14 KiB
Makefile
Raw Blame History

# $FreeBSD$
# Part of a unified Makefile for building kernels. This part includes all
# the definitions that need to be after all the % directives except %RULES
# and ones that act like they are part of %RULES.
#
# Most make variables should not be defined in this file. Instead, they
# should be defined in the kern.pre.mk so that port makefiles can
# override or augment them.
# In case the config had a makeoptions DESTDIR...
.if defined(DESTDIR)
MKMODULESENV+= DESTDIR="${DESTDIR}"
.endif
SYSDIR?= ${S:C;^[^/];${.CURDIR}/&;:tA}
MKMODULESENV+= KERNBUILDDIR="${.CURDIR}" SYSDIR="${SYSDIR}"
MKMODULESENV+= MODULE_TIED=yes
.if defined(CONF_CFLAGS)
MKMODULESENV+= CONF_CFLAGS="${CONF_CFLAGS}"
.endif
.if defined(WITH_CTF)
MKMODULESENV+= WITH_CTF="${WITH_CTF}"
.endif
.if defined(WITH_EXTRA_TCP_STACKS)
MKMODULESENV+= WITH_EXTRA_TCP_STACKS="${WITH_EXTRA_TCP_STACKS}"
.endif
# Allow overriding the kernel debug directory, so kernel and user debug may be
# installed in different directories. Setting it to "" restores the historical
# behavior of installing debug files in the kernel directory.
KERN_DEBUGDIR?= ${DEBUGDIR}
.MAIN: all
.for target in all clean cleandepend cleandir clobber depend install \
${_obj} reinstall tags
${target}: kernel-${target}
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists($S/modules)
${target}: modules-${target}
modules-${target}:
cd $S/modules; ${MKMODULESENV} ${MAKE} \
${target:S/^reinstall$/install/:S/^clobber$/cleandir/}
.endif
.endfor
# Handle ports (as defined by the user) that build kernel modules
.if !defined(NO_MODULES) && defined(PORTS_MODULES)
#
# The ports tree needs some environment variables defined to match the new kernel
#
# Ports search for some dependencies in PATH, so add the location of the installed files
LOCALBASE?= /usr/local
# SRC_BASE is how the ports tree refers to the location of the base source files
.if !defined(SRC_BASE)
SRC_BASE= ${SYSDIR:H:tA}
.endif
# OSVERSION is used by some ports to determine build options
.if !defined(OSRELDATE)
# Definition copied from src/Makefile.inc1
OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
${MAKEOBJDIRPREFIX}${SRC_BASE}/include/osreldate.h
.endif
# Keep the related ports builds in the obj directory so that they are only rebuilt once per kernel build
WRKDIRPREFIX?= ${.OBJDIR}
PORTSMODULESENV=\
env \
-u CC \
-u CXX \
-u CPP \
-u MAKESYSPATH \
-u MK_AUTO_OBJ \
-u MAKEOBJDIR \
MAKEFLAGS="${MAKEFLAGS:M*:tW:S/^-m /-m_/g:S/ -m / -m_/g:tw:N-m_*:NMK_AUTO_OBJ=*}" \
SYSDIR=${SYSDIR} \
PATH=${PATH}:${LOCALBASE}/bin:${LOCALBASE}/sbin \
SRC_BASE=${SRC_BASE} \
OSVERSION=${OSRELDATE} \
WRKDIRPREFIX=${WRKDIRPREFIX}
# The WRKDIR needs to be cleaned before building, and trying to change the target
# with a :C pattern below results in install -> instclean
all:
.for __i in ${PORTS_MODULES}
@${ECHO} "===> Ports module ${__i} (all)"
cd $${PORTSDIR:-/usr/ports}/${__i}; ${PORTSMODULESENV} ${MAKE} -B clean build
.endfor
.for __target in install reinstall clean
${__target}: ports-${__target}
ports-${__target}:
.for __i in ${PORTS_MODULES}
@${ECHO} "===> Ports module ${__i} (${__target})"
cd $${PORTSDIR:-/usr/ports}/${__i}; ${PORTSMODULESENV} ${MAKE} -B ${__target:C/(re)?install/deinstall reinstall/}
.endfor
.endfor
.endif
.ORDER: kernel-install modules-install
beforebuild: .PHONY
kernel-all: beforebuild .WAIT ${KERNEL_KO} ${KERNEL_EXTRA}
kernel-cleandir: kernel-clean kernel-cleandepend
kernel-clobber:
find . -maxdepth 1 ! -type d ! -name version -delete
kernel-obj:
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists($S/modules)
modules: modules-all
.if !defined(NO_MODULES_OBJ)
modules-all modules-depend: modules-obj
.endif
.endif
.if !defined(DEBUG)
FULLKERNEL= ${KERNEL_KO}
.else
FULLKERNEL= ${KERNEL_KO}.full
${KERNEL_KO}: ${FULLKERNEL} ${KERNEL_KO}.debug
${OBJCOPY} --strip-debug --add-gnu-debuglink=${KERNEL_KO}.debug \
${FULLKERNEL} ${.TARGET}
${KERNEL_KO}.debug: ${FULLKERNEL}
${OBJCOPY} --only-keep-debug ${FULLKERNEL} ${.TARGET}
install.debug reinstall.debug: gdbinit
cd ${.CURDIR}; ${MAKE} ${.TARGET:R}
# Install gdbinit files for kernel debugging.
gdbinit:
grep -v '# XXX' ${S}/../tools/debugscripts/dot.gdbinit | \
sed "s:MODPATH:${.OBJDIR}/modules:" > .gdbinit
cp ${S}/../tools/debugscripts/gdbinit.kernel ${.CURDIR}
.if exists(${S}/../tools/debugscripts/gdbinit.${MACHINE_CPUARCH})
cp ${S}/../tools/debugscripts/gdbinit.${MACHINE_CPUARCH} \
${.CURDIR}/gdbinit.machine
.endif
.endif
${FULLKERNEL}: ${SYSTEM_DEP} vers.o
@rm -f ${.TARGET}
@echo linking ${.TARGET}
${SYSTEM_LD}
.if !empty(MD_ROOT_SIZE_CONFIGURED) && defined(MFS_IMAGE)
@sh ${S}/tools/embed_mfs.sh ${.TARGET} ${MFS_IMAGE}
.endif
.if ${MK_CTF} != "no"
@echo ${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ...
@${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ${SYSTEM_OBJS} vers.o
.endif
.if !defined(DEBUG)
${OBJCOPY} --strip-debug ${.TARGET}
.endif
${SYSTEM_LD_TAIL}
OBJS_DEPEND_GUESS+= offset.inc assym.inc vnode_if.h ${BEFORE_DEPEND:M*.h} \
${MFILES:T:S/.m$/.h/}
.for mfile in ${MFILES}
# XXX the low quality .m.o rules gnerated by config are normally used
# instead of the .m.c rules here.
${mfile:T:S/.m$/.c/}: ${mfile}
${AWK} -f $S/tools/makeobjops.awk ${mfile} -c
${mfile:T:S/.m$/.h/}: ${mfile}
${AWK} -f $S/tools/makeobjops.awk ${mfile} -h
.endfor
kernel-clean:
rm -f *.o *.so *.pico *.ko *.s eddep errs \
${FULLKERNEL} ${KERNEL_KO} ${KERNEL_KO}.debug \
tags vers.c \
vnode_if.c vnode_if.h vnode_if_newproto.h vnode_if_typedef.h \
${MFILES:T:S/.m$/.c/} ${MFILES:T:S/.m$/.h/} \
${CLEAN}
# This is a hack. BFD "optimizes" away dynamic mode if there are no
# dynamic references. We could probably do a '-Bforcedynamic' mode like
# in the a.out ld. For now, this works.
HACK_EXTRA_FLAGS?= -shared
hack.pico: Makefile
:> hack.c
${CC} ${HACK_EXTRA_FLAGS} -nostdlib hack.c -o hack.pico
rm -f hack.c
offset.inc: $S/kern/genoffset.sh genoffset.o
NM='${NM}' NMFLAGS='${NMFLAGS}' sh $S/kern/genoffset.sh genoffset.o > ${.TARGET}
genoffset.o: $S/kern/genoffset.c
${CC} -c ${CFLAGS:N-flto:N-fno-common} $S/kern/genoffset.c
# genoffset_test.o is not actually used for anything - the point of compiling it
# is to exercise the CTASSERT that checks that the offsets in the offset.inc
# _lite struct(s) match those in the original(s).
genoffset_test.o: $S/kern/genoffset.c offset.inc
${CC} -c ${CFLAGS:N-flto:N-fno-common} -DOFFSET_TEST \
$S/kern/genoffset.c -o ${.TARGET}
assym.inc: $S/kern/genassym.sh genassym.o genoffset_test.o
NM='${NM}' NMFLAGS='${NMFLAGS}' sh $S/kern/genassym.sh genassym.o > ${.TARGET}
genassym.o: $S/$M/$M/genassym.c offset.inc
${CC} -c ${CFLAGS:N-flto:N-fno-common} $S/$M/$M/genassym.c
OBJS_DEPEND_GUESS+= opt_global.h
genoffset.o genassym.o vers.o: opt_global.h
.if !empty(.MAKE.MODE:Unormal:Mmeta) && empty(.MAKE.MODE:Unormal:Mnofilemon)
_meta_filemon= 1
.endif
# Skip reading .depend when not needed to speed up tree-walks and simple
# lookups. For install, only do this if no other targets are specified.
# Also skip generating or including .depend.* files if in meta+filemon mode
# since it will track dependencies itself. OBJS_DEPEND_GUESS is still used
# for _meta_filemon but not for _SKIP_DEPEND.
.if !defined(NO_SKIP_DEPEND) && \
((!empty(.MAKEFLAGS:M-V) && empty(.MAKEFLAGS:M*DEP*)) || \
${.TARGETS:M*obj} == ${.TARGETS} || \
${.TARGETS:M*clean*} == ${.TARGETS} || \
${.TARGETS:M*install*} == ${.TARGETS})
_SKIP_DEPEND= 1
.endif
.if defined(_SKIP_DEPEND) || defined(_meta_filemon)
.MAKE.DEPENDFILE= /dev/null
.endif
kernel-depend: .depend
SRCS= assym.inc offset.inc vnode_if.h ${BEFORE_DEPEND} ${CFILES} \
${SYSTEM_CFILES} ${GEN_CFILES} ${SFILES} \
${MFILES:T:S/.m$/.h/}
DEPENDOBJS+= ${SYSTEM_OBJS} genassym.o genoffset.o genoffset_test.o
DEPENDOBJS+= ${CLEAN:M*.o}
DEPENDFILES= ${DEPENDOBJS:O:u:C/^/.depend./}
.if ${MAKE_VERSION} < 20160220
DEPEND_MP?= -MP
.endif
.if defined(_SKIP_DEPEND)
# Don't bother reading any .meta files
${DEPENDOBJS}: .NOMETA
.depend: .NOMETA
# Unset these to avoid looping/statting on them later.
.undef DEPENDOBJS
.undef DEPENDFILES
.endif # defined(_SKIP_DEPEND)
DEPEND_CFLAGS+= -MD ${DEPEND_MP} -MF.depend.${.TARGET}
DEPEND_CFLAGS+= -MT${.TARGET}
.if !defined(_meta_filemon)
.if !empty(DEPEND_CFLAGS)
# Only add in DEPEND_CFLAGS for CFLAGS on files we expect from DEPENDOBJS
# as those are the only ones we will include.
DEPEND_CFLAGS_CONDITION= "${DEPENDOBJS:M${.TARGET}}" != ""
CFLAGS+= ${${DEPEND_CFLAGS_CONDITION}:?${DEPEND_CFLAGS}:}
.endif
.for __depend_obj in ${DEPENDFILES}
.if ${MAKE_VERSION} < 20160220
.sinclude "${.OBJDIR}/${__depend_obj}"
.else
.dinclude "${.OBJDIR}/${__depend_obj}"
.endif
.endfor
.endif # !defined(_meta_filemon)
# Always run 'make depend' to generate dependencies early and to avoid the
# need for manually running it. For the kernel this is mostly a NOP since
# all dependencies are correctly added or accounted for. This is mostly to
# ensure downstream uses of kernel-depend are handled.
beforebuild: kernel-depend
# Guess some dependencies for when no ${DEPENDFILE}.OBJ is generated yet.
# For meta+filemon the .meta file is checked for since it is the dependency
# file used.
.for __obj in ${DEPENDOBJS:O:u}
.if defined(_meta_filemon)
_depfile= ${.OBJDIR}/${__obj}.meta
.else
_depfile= ${.OBJDIR}/.depend.${__obj}
.endif
.if !exists(${_depfile})
.if ${SYSTEM_OBJS:M${__obj}}
${__obj}: ${OBJS_DEPEND_GUESS}
.endif
${__obj}: ${OBJS_DEPEND_GUESS.${__obj}}
.elif defined(_meta_filemon)
# For meta mode we still need to know which file to depend on to avoid
# ambiguous suffix transformation rules from .PATH. Meta mode does not
# use .depend files. We really only need source files, not headers since
# they are typically in SRCS/beforebuild already. For target-specific
# guesses do include headers though since they may not be in SRCS.
.if ${SYSTEM_OBJS:M${__obj}}
${__obj}: ${OBJS_DEPEND_GUESS:N*.h}
.endif
${__obj}: ${OBJS_DEPEND_GUESS.${__obj}}
.endif # !exists(${_depfile})
.endfor
.NOPATH: .depend ${DEPENDFILES}
.depend: .PRECIOUS ${SRCS}
_ILINKS= machine
.if ${MACHINE} != ${MACHINE_CPUARCH} && ${MACHINE} != "arm64"
_ILINKS+= ${MACHINE_CPUARCH}
.endif
.if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64"
_ILINKS+= x86
.endif
# Ensure that the link exists without depending on it when it exists.
.for _link in ${_ILINKS}
.if !exists(${.OBJDIR}/${_link})
${SRCS} ${CLEAN:M*.o}: ${_link}
.endif
.endfor
${_ILINKS}:
@case ${.TARGET} in \
machine) \
path=${S}/${MACHINE}/include ;; \
*) \
path=${S}/${.TARGET}/include ;; \
esac ; \
${ECHO} ${.TARGET} "->" $$path ; \
ln -fns $$path ${.TARGET}
# .depend needs include links so we remove them only together.
kernel-cleandepend: .PHONY
rm -f .depend .depend.* ${_ILINKS}
kernel-tags:
@[ -f .depend ] || { echo "you must make depend first"; exit 1; }
sh $S/conf/systags.sh
kernel-install: .PHONY
@if [ ! -f ${KERNEL_KO} ] ; then \
echo "You must build a kernel first." ; \
exit 1 ; \
fi
.if exists(${DESTDIR}${KODIR})
-thiskernel=`sysctl -n kern.bootfile` ; \
if [ ! "`dirname "$$thiskernel"`" -ef ${DESTDIR}${KODIR} ] ; then \
chflags -R noschg ${DESTDIR}${KODIR} ; \
rm -rf ${DESTDIR}${KODIR} ; \
rm -rf ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ; \
else \
if [ -d ${DESTDIR}${KODIR}.old ] ; then \
chflags -R noschg ${DESTDIR}${KODIR}.old ; \
rm -rf ${DESTDIR}${KODIR}.old ; \
fi ; \
mv ${DESTDIR}${KODIR} ${DESTDIR}${KODIR}.old ; \
if [ -n "${KERN_DEBUGDIR}" -a \
-d ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ]; then \
rm -rf ${DESTDIR}${KERN_DEBUGDIR}${KODIR}.old ; \
mv ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ${DESTDIR}${KERN_DEBUGDIR}${KODIR}.old ; \
fi ; \
sysctl kern.bootfile=${DESTDIR}${KODIR}.old/"`basename "$$thiskernel"`" ; \
fi
.endif
mkdir -p ${DESTDIR}${KODIR}
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO} ${DESTDIR}${KODIR}/
.if defined(DEBUG) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no"
mkdir -p ${DESTDIR}${KERN_DEBUGDIR}${KODIR}
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO}.debug ${DESTDIR}${KERN_DEBUGDIR}${KODIR}/
.endif
.if defined(KERNEL_EXTRA_INSTALL)
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_EXTRA_INSTALL} ${DESTDIR}${KODIR}/
.endif
kernel-reinstall:
@-chflags -R noschg ${DESTDIR}${KODIR}
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO} ${DESTDIR}${KODIR}/
.if defined(DEBUG) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no"
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO}.debug ${DESTDIR}${KERN_DEBUGDIR}${KODIR}/
.endif
config.o env.o hints.o vers.o vnode_if.o:
${NORMAL_C}
${NORMAL_CTFCONVERT}
.if ${MK_REPRODUCIBLE_BUILD} != "no"
REPRO_FLAG="-R"
.endif
vers.c: $S/conf/newvers.sh $S/sys/param.h ${SYSTEM_DEP}
MAKE="${MAKE}" sh $S/conf/newvers.sh ${REPRO_FLAG} ${KERN_IDENT}
vnode_if.c: $S/tools/vnode_if.awk $S/kern/vnode_if.src
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -c
vnode_if.h vnode_if_newproto.h vnode_if_typedef.h: $S/tools/vnode_if.awk \
$S/kern/vnode_if.src
vnode_if.h: vnode_if_newproto.h vnode_if_typedef.h
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -h
vnode_if_newproto.h:
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -p
vnode_if_typedef.h:
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -q
.if ${MFS_IMAGE:Uno} != "no"
.if empty(MD_ROOT_SIZE_CONFIGURED)
# Generate an object file from the file system image to embed in the kernel
# via linking. Make sure the contents are in the mfs section and rename the
# start/end/size variables to __start_mfs, __stop_mfs, and mfs_size,
# respectively.
embedfs_${MFS_IMAGE:T:R}.o: ${MFS_IMAGE}
${OBJCOPY} --input-target binary \
--output-target ${EMBEDFS_FORMAT.${MACHINE_ARCH}} \
--binary-architecture ${EMBEDFS_ARCH.${MACHINE_ARCH}} \
${MFS_IMAGE} ${.TARGET}
${OBJCOPY} \
--rename-section .data=mfs,contents,alloc,load,readonly,data \
--redefine-sym \
_binary_${MFS_IMAGE:C,[^[:alnum:]],_,g}_size=__mfs_root_size \
--redefine-sym \
_binary_${MFS_IMAGE:C,[^[:alnum:]],_,g}_start=mfs_root \
--redefine-sym \
_binary_${MFS_IMAGE:C,[^[:alnum:]],_,g}_end=mfs_root_end \
${.TARGET}
.endif
.endif
# XXX strictly, everything depends on Makefile because changes to ${PROF}
# only appear there, but we don't handle that.
.include "kern.mk"
Reference in New Issue View Git Blame Copy Permalink