d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2259773a12
freebsd-skq/sys/cam/mmc/mmc_xpt.c
kibab 06f56d598b Fix setting RCA for MMC cards 
Unlike SD cards, that publish RCA in response to CMD3,
MMC cards expect the host to set RCA itself.

Since we don't support multiple MMC cards on the bus,
just assign a static RCA of 2 to the attached MMC card.

Approved by:	imp (mentor)
Differential Revision:	https://reviews.freebsd.org/D13063
2018-06-19 20:02:03 +00:00

1106 lines
35 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2013,2014 Ilya Bakulin <ilya@bakulin.de>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/systm.h>
#include <sys/types.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/time.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
#include <sys/interrupt.h>
#include <sys/sbuf.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/sysctl.h>
#include <sys/condvar.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_queue.h>
#include <cam/cam_periph.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_xpt_internal.h>
#include <cam/cam_debug.h>
#include <cam/mmc/mmc.h>
#include <cam/mmc/mmc_bus.h>
#include <machine/stdarg.h> /* for xpt_print below */
#include <machine/_inttypes.h> /* for PRIu64 */
#include "opt_cam.h"
FEATURE(mmccam, "CAM-based MMC/SD/SDIO stack");
static struct cam_ed * mmc_alloc_device(struct cam_eb *bus,
struct cam_et *target, lun_id_t lun_id);
static void mmc_dev_async(u_int32_t async_code, struct cam_eb *bus,
struct cam_et *target, struct cam_ed *device, void *async_arg);
static void mmc_action(union ccb *start_ccb);
static void mmc_dev_advinfo(union ccb *start_ccb);
static void mmc_announce_periph(struct cam_periph *periph);
static void mmc_scan_lun(struct cam_periph *periph,
struct cam_path *path, cam_flags flags, union ccb *ccb);
/* mmcprobe methods */
static cam_status mmcprobe_register(struct cam_periph *periph, void *arg);
static void mmcprobe_start(struct cam_periph *periph, union ccb *start_ccb);
static void mmcprobe_cleanup(struct cam_periph *periph);
static void mmcprobe_done(struct cam_periph *periph, union ccb *done_ccb);
static void mmc_proto_announce(struct cam_ed *device);
static void mmc_proto_denounce(struct cam_ed *device);
static void mmc_proto_debug_out(union ccb *ccb);
typedef enum {
PROBE_RESET,
PROBE_IDENTIFY,
PROBE_SDIO_RESET,
PROBE_SEND_IF_COND,
PROBE_SDIO_INIT,
PROBE_MMC_INIT,
PROBE_SEND_APP_OP_COND,
PROBE_GET_CID,
PROBE_GET_CSD,
PROBE_SEND_RELATIVE_ADDR,
PROBE_MMC_SET_RELATIVE_ADDR,
PROBE_SELECT_CARD,
PROBE_DONE,
PROBE_INVALID
} probe_action;
static char *probe_action_text[] = {
"PROBE_RESET",
"PROBE_IDENTIFY",
"PROBE_SDIO_RESET",
"PROBE_SEND_IF_COND",
"PROBE_SDIO_INIT",
"PROBE_MMC_INIT",
"PROBE_SEND_APP_OP_COND",
"PROBE_GET_CID",
"PROBE_GET_CSD",
"PROBE_SEND_RELATIVE_ADDR",
"PROBE_MMC_SET_RELATIVE_ADDR",
"PROBE_SELECT_CARD",
"PROBE_DONE",
"PROBE_INVALID"
};
#define PROBE_SET_ACTION(softc, newaction) \
do { \
char **text; \
text = probe_action_text; \
CAM_DEBUG((softc)->periph->path, CAM_DEBUG_PROBE, \
("Probe %s to %s\n", text[(softc)->action], \
text[(newaction)])); \
(softc)->action = (newaction); \
} while(0)
static struct xpt_xport_ops mmc_xport_ops = {
.alloc_device = mmc_alloc_device,
.action = mmc_action,
.async = mmc_dev_async,
.announce = mmc_announce_periph,
};
#define MMC_XPT_XPORT(x, X) \
static struct xpt_xport mmc_xport_ ## x = { \
.xport = XPORT_ ## X, \
.name = #x, \
.ops = &mmc_xport_ops, \
}; \
CAM_XPT_XPORT(mmc_xport_ ## x);
MMC_XPT_XPORT(mmc, MMCSD);
static struct xpt_proto_ops mmc_proto_ops = {
.announce = mmc_proto_announce,
.denounce = mmc_proto_denounce,
.debug_out = mmc_proto_debug_out,
};
static struct xpt_proto mmc_proto = {
.proto = PROTO_MMCSD,
.name = "mmcsd",
.ops = &mmc_proto_ops,
};
CAM_XPT_PROTO(mmc_proto);
typedef struct {
probe_action action;
int restart;
union ccb saved_ccb;
uint32_t flags;
#define PROBE_FLAG_ACMD_SENT 0x1 /* CMD55 is sent, card expects ACMD */
uint8_t acmd41_count; /* how many times ACMD41 has been issued */
struct cam_periph *periph;
} mmcprobe_softc;
/* XPort functions -- an interface to CAM at periph side */
static struct cam_ed *
mmc_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id)
{
struct cam_ed *device;
printf("mmc_alloc_device()\n");
device = xpt_alloc_device(bus, target, lun_id);
if (device == NULL)
return (NULL);
device->quirk = NULL;
device->mintags = 0;
device->maxtags = 0;
bzero(&device->inq_data, sizeof(device->inq_data));
device->inq_flags = 0;
device->queue_flags = 0;
device->serial_num = NULL;
device->serial_num_len = 0;
return (device);
}
static void
mmc_dev_async(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target,
struct cam_ed *device, void *async_arg)
{
printf("mmc_dev_async(async_code=0x%x, path_id=%d, target_id=%x, lun_id=%" SCNx64 "\n",
async_code,
bus->path_id,
target->target_id,
device->lun_id);
/*
* We only need to handle events for real devices.
*/
if (target->target_id == CAM_TARGET_WILDCARD
|| device->lun_id == CAM_LUN_WILDCARD)
return;
if (async_code == AC_LOST_DEVICE) {
if ((device->flags & CAM_DEV_UNCONFIGURED) == 0) {
printf("AC_LOST_DEVICE -> set to unconfigured\n");
device->flags |= CAM_DEV_UNCONFIGURED;
xpt_release_device(device);
} else {
printf("AC_LOST_DEVICE on unconfigured device\n");
}
} else if (async_code == AC_FOUND_DEVICE) {
printf("Got AC_FOUND_DEVICE -- whatever...\n");
} else if (async_code == AC_PATH_REGISTERED) {
printf("Got AC_PATH_REGISTERED -- whatever...\n");
} else if (async_code == AC_PATH_DEREGISTERED ) {
printf("Got AC_PATH_DEREGISTERED -- whatever...\n");
} else if (async_code == AC_UNIT_ATTENTION) {
printf("Got interrupt generated by the card and ignored it\n");
} else
panic("Unknown async code\n");
}
/* Taken from nvme_scan_lun, thanks to bsdimp@ */
static void
mmc_scan_lun(struct cam_periph *periph, struct cam_path *path,
cam_flags flags, union ccb *request_ccb)
{
struct ccb_pathinq cpi;
cam_status status;
struct cam_periph *old_periph;
int lock;
CAM_DEBUG(path, CAM_DEBUG_TRACE, ("mmc_scan_lun\n"));
xpt_path_inq(&cpi, path);
if (cpi.ccb_h.status != CAM_REQ_CMP) {
if (request_ccb != NULL) {
request_ccb->ccb_h.status = cpi.ccb_h.status;
xpt_done(request_ccb);
}
return;
}
if (xpt_path_lun_id(path) == CAM_LUN_WILDCARD) {
CAM_DEBUG(path, CAM_DEBUG_TRACE, ("mmd_scan_lun ignoring bus\n"));
request_ccb->ccb_h.status = CAM_REQ_CMP; /* XXX signal error ? */
xpt_done(request_ccb);
return;
}
lock = (xpt_path_owned(path) == 0);
if (lock)
xpt_path_lock(path);
if ((old_periph = cam_periph_find(path, "mmcprobe")) != NULL) {
if ((old_periph->flags & CAM_PERIPH_INVALID) == 0) {
// mmcprobe_softc *softc;
// softc = (mmcprobe_softc *)old_periph->softc;
// Not sure if we need request ccb queue for mmc
// TAILQ_INSERT_TAIL(&softc->request_ccbs,
// &request_ccb->ccb_h, periph_links.tqe);
// softc->restart = 1;
CAM_DEBUG(path, CAM_DEBUG_INFO,
("Got scan request, but mmcprobe already exists\n"));
request_ccb->ccb_h.status = CAM_REQ_CMP_ERR;
xpt_done(request_ccb);
} else {
request_ccb->ccb_h.status = CAM_REQ_CMP_ERR;
xpt_done(request_ccb);
}
} else {
xpt_print(path, " Set up the mmcprobe device...\n");
status = cam_periph_alloc(mmcprobe_register, NULL,
mmcprobe_cleanup,
mmcprobe_start,
"mmcprobe",
CAM_PERIPH_BIO,
path, NULL, 0,
request_ccb);
if (status != CAM_REQ_CMP) {
xpt_print(path, "xpt_scan_lun: cam_alloc_periph "
"returned an error, can't continue probe\n");
}
request_ccb->ccb_h.status = status;
xpt_done(request_ccb);
}
if (lock)
xpt_path_unlock(path);
}
static void
mmc_action(union ccb *start_ccb)
{
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE,
("mmc_action! func_code=%x, action %s\n", start_ccb->ccb_h.func_code,
xpt_action_name(start_ccb->ccb_h.func_code)));
switch (start_ccb->ccb_h.func_code) {
case XPT_SCAN_BUS:
/* FALLTHROUGH */
case XPT_SCAN_TGT:
/* FALLTHROUGH */
case XPT_SCAN_LUN:
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_INFO,
("XPT_SCAN_{BUS,TGT,LUN}\n"));
mmc_scan_lun(start_ccb->ccb_h.path->periph,
start_ccb->ccb_h.path, start_ccb->crcn.flags,
start_ccb);
break;
case XPT_DEV_ADVINFO:
{
mmc_dev_advinfo(start_ccb);
break;
}
default:
xpt_action_default(start_ccb);
break;
}
}
static void
mmc_dev_advinfo(union ccb *start_ccb)
{
struct cam_ed *device;
struct ccb_dev_advinfo *cdai;
off_t amt;
start_ccb->ccb_h.status = CAM_REQ_INVALID;
device = start_ccb->ccb_h.path->device;
cdai = &start_ccb->cdai;
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE,
("%s: request %x\n", __func__, cdai->buftype));
/* We don't support writing any data */
if (cdai->flags & CDAI_FLAG_STORE)
panic("Attempt to store data?!");
switch(cdai->buftype) {
case CDAI_TYPE_SCSI_DEVID:
cdai->provsiz = device->device_id_len;
if (device->device_id_len == 0)
break;
amt = MIN(cdai->provsiz, cdai->bufsiz);
memcpy(cdai->buf, device->device_id, amt);
break;
case CDAI_TYPE_SERIAL_NUM:
cdai->provsiz = device->serial_num_len;
if (device->serial_num_len == 0)
break;
amt = MIN(cdai->provsiz, cdai->bufsiz);
memcpy(cdai->buf, device->serial_num, amt);
break;
case CDAI_TYPE_PHYS_PATH: /* pass(4) wants this */
cdai->provsiz = 0;
break;
case CDAI_TYPE_MMC_PARAMS:
cdai->provsiz = sizeof(struct mmc_params);
amt = MIN(cdai->provsiz, cdai->bufsiz);
memcpy(cdai->buf, &device->mmc_ident_data, amt);
break;
default:
panic("Unknown buftype");
return;
}
start_ccb->ccb_h.status = CAM_REQ_CMP;
}
static void
mmc_announce_periph(struct cam_periph *periph)
{
struct ccb_pathinq cpi;
struct ccb_trans_settings cts;
struct cam_path *path = periph->path;
cam_periph_assert(periph, MA_OWNED);
CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
("mmc_announce_periph: called\n"));
xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NORMAL);
cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
cts.type = CTS_TYPE_CURRENT_SETTINGS;
xpt_action((union ccb*)&cts);
if ((cts.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
return;
xpt_path_inq(&cpi, periph->path);
printf("XPT info: CLK %04X, ...\n", cts.proto_specific.mmc.ios.clock);
}
/* This func is called per attached device :-( */
void
mmc_print_ident(struct mmc_params *ident_data)
{
printf("Relative addr: %08x\n", ident_data->card_rca);
printf("Card features: <");
if (ident_data->card_features & CARD_FEATURE_MMC)
printf("MMC ");
if (ident_data->card_features & CARD_FEATURE_MEMORY)
printf("Memory ");
if (ident_data->card_features & CARD_FEATURE_SDHC)
printf("High-Capacity ");
if (ident_data->card_features & CARD_FEATURE_SD20)
printf("SD2.0-Conditions ");
if (ident_data->card_features & CARD_FEATURE_SDIO)
printf("SDIO ");
printf(">\n");
if (ident_data->card_features & CARD_FEATURE_MEMORY)
printf("Card memory OCR: %08x\n", ident_data->card_ocr);
if (ident_data->card_features & CARD_FEATURE_SDIO) {
printf("Card IO OCR: %08x\n", ident_data->io_ocr);
printf("Number of funcitions: %u\n", ident_data->sdio_func_count);
}
}
static void
mmc_proto_announce(struct cam_ed *device)
{
mmc_print_ident(&device->mmc_ident_data);
}
static void
mmc_proto_denounce(struct cam_ed *device)
{
mmc_print_ident(&device->mmc_ident_data);
}
static void
mmc_proto_debug_out(union ccb *ccb)
{
if (ccb->ccb_h.func_code != XPT_MMC_IO)
return;
CAM_DEBUG(ccb->ccb_h.path,
CAM_DEBUG_CDB,("mmc_proto_debug_out\n"));
}
static periph_init_t probe_periph_init;
static struct periph_driver probe_driver =
{
probe_periph_init, "mmcprobe",
TAILQ_HEAD_INITIALIZER(probe_driver.units), /* generation */ 0,
CAM_PERIPH_DRV_EARLY
};
PERIPHDRIVER_DECLARE(mmcprobe, probe_driver);
#define CARD_ID_FREQUENCY 400000 /* Spec requires 400kHz max during ID phase. */
static void
probe_periph_init()
{
}
static cam_status
mmcprobe_register(struct cam_periph *periph, void *arg)
{
mmcprobe_softc *softc;
union ccb *request_ccb; /* CCB representing the probe request */
int status;
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("mmcprobe_register\n"));
request_ccb = (union ccb *)arg;
if (request_ccb == NULL) {
printf("mmcprobe_register: no probe CCB, "
"can't register device\n");
return(CAM_REQ_CMP_ERR);
}
softc = (mmcprobe_softc *)malloc(sizeof(*softc), M_CAMXPT, M_NOWAIT);
if (softc == NULL) {
printf("proberegister: Unable to probe new device. "
"Unable to allocate softc\n");
return(CAM_REQ_CMP_ERR);
}
softc->flags = 0;
softc->acmd41_count = 0;
periph->softc = softc;
softc->periph = periph;
softc->action = PROBE_INVALID;
softc->restart = 0;
status = cam_periph_acquire(periph);
memset(&periph->path->device->mmc_ident_data, 0, sizeof(struct mmc_params));
if (status != 0) {
printf("proberegister: cam_periph_acquire failed (status=%d)\n",
status);
return (CAM_REQ_CMP_ERR);
}
CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Probe started\n"));
if (periph->path->device->flags & CAM_DEV_UNCONFIGURED)
PROBE_SET_ACTION(softc, PROBE_RESET);
else
PROBE_SET_ACTION(softc, PROBE_IDENTIFY);
/* This will kick the ball */
xpt_schedule(periph, CAM_PRIORITY_XPT);
return(CAM_REQ_CMP);
}
static int
mmc_highest_voltage(uint32_t ocr)
{
int i;
for (i = MMC_OCR_MAX_VOLTAGE_SHIFT;
i >= MMC_OCR_MIN_VOLTAGE_SHIFT; i--)
if (ocr & (1 << i))
return (i);
return (-1);
}
static inline void
init_standard_ccb(union ccb *ccb, uint32_t cmd)
{
ccb->ccb_h.func_code = cmd;
ccb->ccb_h.flags = CAM_DIR_OUT;
ccb->ccb_h.retry_count = 0;
ccb->ccb_h.timeout = 15 * 1000;
ccb->ccb_h.cbfcnp = mmcprobe_done;
}
static void
mmcprobe_start(struct cam_periph *periph, union ccb *start_ccb)
{
mmcprobe_softc *softc;
struct cam_path *path;
struct ccb_mmcio *mmcio;
struct mtx *p_mtx = cam_periph_mtx(periph);
struct ccb_trans_settings_mmc *cts;
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("mmcprobe_start\n"));
softc = (mmcprobe_softc *)periph->softc;
path = start_ccb->ccb_h.path;
mmcio = &start_ccb->mmcio;
cts = &start_ccb->cts.proto_specific.mmc;
struct mmc_params *mmcp = &path->device->mmc_ident_data;
memset(&mmcio->cmd, 0, sizeof(struct mmc_command));
if (softc->restart) {
softc->restart = 0;
if (path->device->flags & CAM_DEV_UNCONFIGURED)
softc->action = PROBE_RESET;
else
softc->action = PROBE_IDENTIFY;
}
/* Here is the place where the identify fun begins */
switch (softc->action) {
case PROBE_RESET:
/* FALLTHROUGH */
case PROBE_IDENTIFY:
xpt_path_inq(&start_ccb->cpi, periph->path);
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_RESET\n"));
init_standard_ccb(start_ccb, XPT_GET_TRAN_SETTINGS);
xpt_action(start_ccb);
if (cts->ios.power_mode != power_off) {
init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS);
cts->ios.power_mode = power_off;
cts->ios_valid = MMC_PM;
xpt_action(start_ccb);
mtx_sleep(periph, p_mtx, 0, "mmcios", 100);
}
/* mmc_power_up */
/* Get the host OCR */
init_standard_ccb(start_ccb, XPT_GET_TRAN_SETTINGS);
xpt_action(start_ccb);
uint32_t hv = mmc_highest_voltage(cts->host_ocr);
init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS);
cts->ios.vdd = hv;
cts->ios.bus_mode = opendrain;
cts->ios.chip_select = cs_dontcare;
cts->ios.power_mode = power_up;
cts->ios.bus_width = bus_width_1;
cts->ios.clock = 0;
cts->ios_valid = MMC_VDD | MMC_PM | MMC_BM |
MMC_CS | MMC_BW | MMC_CLK;
xpt_action(start_ccb);
mtx_sleep(periph, p_mtx, 0, "mmcios", 100);
init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS);
cts->ios.power_mode = power_on;
cts->ios.clock = CARD_ID_FREQUENCY;
cts->ios.timing = bus_timing_normal;
cts->ios_valid = MMC_PM | MMC_CLK | MMC_BT;
xpt_action(start_ccb);
mtx_sleep(periph, p_mtx, 0, "mmcios", 100);
/* End for mmc_power_on */
/* Begin mmc_idle_cards() */
init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS);
cts->ios.chip_select = cs_high;
cts->ios_valid = MMC_CS;
xpt_action(start_ccb);
mtx_sleep(periph, p_mtx, 0, "mmcios", 1);
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Send first XPT_MMC_IO\n"));
init_standard_ccb(start_ccb, XPT_MMC_IO);
mmcio->cmd.opcode = MMC_GO_IDLE_STATE; /* CMD 0 */
mmcio->cmd.arg = 0;
mmcio->cmd.flags = MMC_RSP_NONE | MMC_CMD_BC;
mmcio->cmd.data = NULL;
mmcio->stop.opcode = 0;
/* XXX Reset I/O portion as well */
break;
case PROBE_SDIO_RESET:
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("Start with PROBE_SDIO_RESET\n"));
uint32_t mmc_arg = SD_IO_RW_ADR(SD_IO_CCCR_CTL)
| SD_IO_RW_DAT(CCCR_CTL_RES) | SD_IO_RW_WR | SD_IO_RW_RAW;
cam_fill_mmcio(&start_ccb->mmcio,
/*retries*/ 0,
/*cbfcnp*/ mmcprobe_done,
/*flags*/ CAM_DIR_NONE,
/*mmc_opcode*/ SD_IO_RW_DIRECT,
/*mmc_arg*/ mmc_arg,
/*mmc_flags*/ MMC_RSP_R5 | MMC_CMD_AC,
/*mmc_data*/ NULL,
/*timeout*/ 1000);
break;
case PROBE_SEND_IF_COND:
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("Start with PROBE_SEND_IF_COND\n"));
init_standard_ccb(start_ccb, XPT_MMC_IO);
mmcio->cmd.opcode = SD_SEND_IF_COND; /* CMD 8 */
mmcio->cmd.arg = (1 << 8) + 0xAA;
mmcio->cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR;
mmcio->stop.opcode = 0;
break;
case PROBE_SDIO_INIT:
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("Start with PROBE_SDIO_INIT\n"));
init_standard_ccb(start_ccb, XPT_MMC_IO);
mmcio->cmd.opcode = IO_SEND_OP_COND; /* CMD 5 */
mmcio->cmd.arg = mmcp->io_ocr;
mmcio->cmd.flags = MMC_RSP_R4;
mmcio->stop.opcode = 0;
break;
case PROBE_MMC_INIT:
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("Start with PROBE_MMC_INIT\n"));
init_standard_ccb(start_ccb, XPT_MMC_IO);
mmcio->cmd.opcode = MMC_SEND_OP_COND; /* CMD 1 */
mmcio->cmd.arg = MMC_OCR_CCS | mmcp->card_ocr; /* CCS + ocr */;
mmcio->cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
mmcio->stop.opcode = 0;
break;
case PROBE_SEND_APP_OP_COND:
init_standard_ccb(start_ccb, XPT_MMC_IO);
if (softc->flags & PROBE_FLAG_ACMD_SENT) {
mmcio->cmd.opcode = ACMD_SD_SEND_OP_COND; /* CMD 41 */
/*
* We set CCS bit because we do support SDHC cards.
* XXX: Don't set CCS if no response to CMD8.
*/
uint32_t cmd_arg = MMC_OCR_CCS | mmcp->card_ocr; /* CCS + ocr */
if (softc->acmd41_count < 10 && mmcp->card_ocr != 0 )
cmd_arg |= MMC_OCR_S18R;
mmcio->cmd.arg = cmd_arg;
mmcio->cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
softc->acmd41_count++;
} else {
mmcio->cmd.opcode = MMC_APP_CMD; /* CMD 55 */
mmcio->cmd.arg = 0; /* rca << 16 */
mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
}
mmcio->stop.opcode = 0;
break;
case PROBE_GET_CID: /* XXX move to mmc_da */
init_standard_ccb(start_ccb, XPT_MMC_IO);
mmcio->cmd.opcode = MMC_ALL_SEND_CID;
mmcio->cmd.arg = 0;
mmcio->cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
mmcio->stop.opcode = 0;
break;
case PROBE_SEND_RELATIVE_ADDR:
init_standard_ccb(start_ccb, XPT_MMC_IO);
mmcio->cmd.opcode = SD_SEND_RELATIVE_ADDR;
mmcio->cmd.arg = 0;
mmcio->cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR;
mmcio->stop.opcode = 0;
break;
case PROBE_MMC_SET_RELATIVE_ADDR:
init_standard_ccb(start_ccb, XPT_MMC_IO);
mmcio->cmd.opcode = MMC_SET_RELATIVE_ADDR;
mmcio->cmd.arg = MMC_PROPOSED_RCA << 16;
mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
mmcio->stop.opcode = 0;
break;
case PROBE_SELECT_CARD:
init_standard_ccb(start_ccb, XPT_MMC_IO);
mmcio->cmd.opcode = MMC_SELECT_CARD;
mmcio->cmd.arg = (uint32_t)path->device->mmc_ident_data.card_rca << 16;
mmcio->cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
mmcio->stop.opcode = 0;
break;
case PROBE_GET_CSD: /* XXX move to mmc_da */
init_standard_ccb(start_ccb, XPT_MMC_IO);
mmcio->cmd.opcode = MMC_SEND_CSD;
mmcio->cmd.arg = (uint32_t)path->device->mmc_ident_data.card_rca << 16;
mmcio->cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
mmcio->stop.opcode = 0;
break;
case PROBE_DONE:
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_DONE\n"));
init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS);
cts->ios.bus_mode = pushpull;
cts->ios_valid = MMC_BM;
xpt_action(start_ccb);
return;
/* NOTREACHED */
break;
case PROBE_INVALID:
break;
default:
CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("probestart: invalid action state 0x%x\n", softc->action));
panic("default: case in mmc_probe_start()");
}
start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
xpt_action(start_ccb);
}
static void mmcprobe_cleanup(struct cam_periph *periph)
{
free(periph->softc, M_CAMXPT);
}
static void
mmcprobe_done(struct cam_periph *periph, union ccb *done_ccb)
{
mmcprobe_softc *softc;
struct cam_path *path;
int err;
struct ccb_mmcio *mmcio;
u_int32_t priority;
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("mmcprobe_done\n"));
softc = (mmcprobe_softc *)periph->softc;
path = done_ccb->ccb_h.path;
priority = done_ccb->ccb_h.pinfo.priority;
switch (softc->action) {
case PROBE_RESET:
/* FALLTHROUGH */
case PROBE_IDENTIFY:
{
printf("Starting completion of PROBE_RESET\n");
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_RESET\n"));
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
if (err != MMC_ERR_NONE) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("GO_IDLE_STATE failed with error %d\n",
err));
/* There was a device there, but now it's gone... */
if ((path->device->flags & CAM_DEV_UNCONFIGURED) == 0) {
xpt_async(AC_LOST_DEVICE, path, NULL);
}
PROBE_SET_ACTION(softc, PROBE_INVALID);
break;
}
path->device->protocol = PROTO_MMCSD;
PROBE_SET_ACTION(softc, PROBE_SEND_IF_COND);
break;
}
case PROBE_SEND_IF_COND:
{
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
struct mmc_params *mmcp = &path->device->mmc_ident_data;
if (err != MMC_ERR_NONE || mmcio->cmd.resp[0] != 0x1AA) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("IF_COND: error %d, pattern %08x\n",
err, mmcio->cmd.resp[0]));
} else {
mmcp->card_features |= CARD_FEATURE_SD20;
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("SD 2.0 interface conditions: OK\n"));
}
PROBE_SET_ACTION(softc, PROBE_SDIO_RESET);
break;
}
case PROBE_SDIO_RESET:
{
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("SDIO_RESET: error %d, CCCR CTL register: %08x\n",
err, mmcio->cmd.resp[0]));
PROBE_SET_ACTION(softc, PROBE_SDIO_INIT);
break;
}
case PROBE_SDIO_INIT:
{
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
struct mmc_params *mmcp = &path->device->mmc_ident_data;
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("SDIO_INIT: error %d, %08x %08x %08x %08x\n",
err, mmcio->cmd.resp[0],
mmcio->cmd.resp[1],
mmcio->cmd.resp[2],
mmcio->cmd.resp[3]));
/*
* Error here means that this card is not SDIO,
* so proceed with memory init as if nothing has happened
*/
if (err != MMC_ERR_NONE) {
PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND);
break;
}
mmcp->card_features |= CARD_FEATURE_SDIO;
uint32_t ioifcond = mmcio->cmd.resp[0];
uint32_t io_ocr = ioifcond & R4_IO_OCR_MASK;
mmcp->sdio_func_count = R4_IO_NUM_FUNCTIONS(ioifcond);
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("SDIO card: %d functions\n", mmcp->sdio_func_count));
if (io_ocr == 0) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("SDIO OCR invalid?!\n"));
break; /* Retry */
}
if (io_ocr != 0 && mmcp->io_ocr == 0) {
mmcp->io_ocr = io_ocr;
break; /* Retry, this time with non-0 OCR */
}
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("SDIO OCR: %08x\n", mmcp->io_ocr));
if (ioifcond & R4_IO_MEM_PRESENT) {
/* Combo card -- proceed to memory initialization */
PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND);
} else {
/* No memory portion -- get RCA and select card */
PROBE_SET_ACTION(softc, PROBE_SEND_RELATIVE_ADDR);
}
break;
}
case PROBE_MMC_INIT:
{
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
struct mmc_params *mmcp = &path->device->mmc_ident_data;
if (err != MMC_ERR_NONE) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("MMC_INIT: error %d, resp %08x\n",
err, mmcio->cmd.resp[0]));
PROBE_SET_ACTION(softc, PROBE_INVALID);
break;
}
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("MMC card, OCR %08x\n", mmcio->cmd.resp[0]));
if (mmcp->card_ocr == 0) {
/* We haven't sent the OCR to the card yet -- do it */
mmcp->card_ocr = mmcio->cmd.resp[0];
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("-> sending OCR to card\n"));
break;
}
if (!(mmcio->cmd.resp[0] & MMC_OCR_CARD_BUSY)) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("Card is still powering up\n"));
break;
}
mmcp->card_features |= CARD_FEATURE_MMC | CARD_FEATURE_MEMORY;
PROBE_SET_ACTION(softc, PROBE_GET_CID);
break;
}
case PROBE_SEND_APP_OP_COND:
{
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
if (err != MMC_ERR_NONE) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("APP_OP_COND: error %d, resp %08x\n",
err, mmcio->cmd.resp[0]));
PROBE_SET_ACTION(softc, PROBE_MMC_INIT);
break;
}
if (!(softc->flags & PROBE_FLAG_ACMD_SENT)) {
/* Don't change the state */
softc->flags |= PROBE_FLAG_ACMD_SENT;
break;
}
softc->flags &= ~PROBE_FLAG_ACMD_SENT;
if ((mmcio->cmd.resp[0] & MMC_OCR_CARD_BUSY) ||
(mmcio->cmd.arg & MMC_OCR_VOLTAGE) == 0) {
struct mmc_params *mmcp = &path->device->mmc_ident_data;
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("Card OCR: %08x\n", mmcio->cmd.resp[0]));
if (mmcp->card_ocr == 0) {
mmcp->card_ocr = mmcio->cmd.resp[0];
/* Now when we know OCR that we want -- send it to card */
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("-> sending OCR to card\n"));
} else {
/* We already know the OCR and despite of that we
* are processing the answer to ACMD41 -> move on
*/
PROBE_SET_ACTION(softc, PROBE_GET_CID);
}
/* Getting an answer to ACMD41 means the card has memory */
mmcp->card_features |= CARD_FEATURE_MEMORY;
/* Standard capacity vs High Capacity memory card */
if (mmcio->cmd.resp[0] & MMC_OCR_CCS) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("Card is SDHC\n"));
mmcp->card_features |= CARD_FEATURE_SDHC;
}
/* Whether the card supports 1.8V signaling */
if (mmcio->cmd.resp[0] & MMC_OCR_S18A) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("Card supports 1.8V signaling\n"));
mmcp->card_features |= CARD_FEATURE_18V;
}
} else {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("Card not ready: %08x\n", mmcio->cmd.resp[0]));
/* Send CMD55+ACMD41 once again */
PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND);
}
break;
}
case PROBE_GET_CID: /* XXX move to mmc_da */
{
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
if (err != MMC_ERR_NONE) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("PROBE_GET_CID: error %d\n", err));
PROBE_SET_ACTION(softc, PROBE_INVALID);
break;
}
struct mmc_params *mmcp = &path->device->mmc_ident_data;
memcpy(mmcp->card_cid, mmcio->cmd.resp, 4 * sizeof(uint32_t));
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("CID %08x%08x%08x%08x\n",
mmcp->card_cid[0],
mmcp->card_cid[1],
mmcp->card_cid[2],
mmcp->card_cid[3]));
if (mmcp->card_features & CARD_FEATURE_MMC)
PROBE_SET_ACTION(softc, PROBE_MMC_SET_RELATIVE_ADDR);
else
PROBE_SET_ACTION(softc, PROBE_SEND_RELATIVE_ADDR);
break;
}
case PROBE_SEND_RELATIVE_ADDR: {
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
struct mmc_params *mmcp = &path->device->mmc_ident_data;
uint16_t rca = mmcio->cmd.resp[0] >> 16;
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("Card published RCA: %u\n", rca));
path->device->mmc_ident_data.card_rca = rca;
if (err != MMC_ERR_NONE) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("PROBE_SEND_RELATIVE_ADDR: error %d\n", err));
PROBE_SET_ACTION(softc, PROBE_INVALID);
break;
}
/* If memory is present, get CSD, otherwise select card */
if (mmcp->card_features & CARD_FEATURE_MEMORY)
PROBE_SET_ACTION(softc, PROBE_GET_CSD);
else
PROBE_SET_ACTION(softc, PROBE_SELECT_CARD);
break;
}
case PROBE_MMC_SET_RELATIVE_ADDR:
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
if (err != MMC_ERR_NONE) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("PROBE_MMC_SET_RELATIVE_ADDR: error %d\n", err));
PROBE_SET_ACTION(softc, PROBE_INVALID);
break;
}
path->device->mmc_ident_data.card_rca = MMC_PROPOSED_RCA;
PROBE_SET_ACTION(softc, PROBE_GET_CSD);
break;
case PROBE_GET_CSD: {
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
if (err != MMC_ERR_NONE) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("PROBE_GET_CSD: error %d\n", err));
PROBE_SET_ACTION(softc, PROBE_INVALID);
break;
}
struct mmc_params *mmcp = &path->device->mmc_ident_data;
memcpy(mmcp->card_csd, mmcio->cmd.resp, 4 * sizeof(uint32_t));
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("CSD %08x%08x%08x%08x\n",
mmcp->card_csd[0],
mmcp->card_csd[1],
mmcp->card_csd[2],
mmcp->card_csd[3]));
PROBE_SET_ACTION(softc, PROBE_SELECT_CARD);
break;
}
case PROBE_SELECT_CARD: {
mmcio = &done_ccb->mmcio;
err = mmcio->cmd.error;
if (err != MMC_ERR_NONE) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("PROBE_SEND_RELATIVE_ADDR: error %d\n", err));
PROBE_SET_ACTION(softc, PROBE_INVALID);
break;
}
PROBE_SET_ACTION(softc, PROBE_DONE);
break;
}
default:
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("mmc_probedone: invalid action state 0x%x\n", softc->action));
panic("default: case in mmc_probe_done()");
}
if (softc->action == PROBE_INVALID &&
(path->device->flags & CAM_DEV_UNCONFIGURED) == 0) {
CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE,
("mmc_probedone: Should send AC_LOST_DEVICE but won't for now\n"));
//xpt_async(AC_LOST_DEVICE, path, NULL);
}
xpt_release_ccb(done_ccb);
if (softc->action != PROBE_INVALID)
xpt_schedule(periph, priority);
/* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */
int frozen = cam_release_devq(path, 0, 0, 0, FALSE);
printf("mmc_probedone: remaining freezecnt %d\n", frozen);
if (softc->action == PROBE_DONE) {
/* Notify the system that the device is found! */
if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) {
path->device->flags &= ~CAM_DEV_UNCONFIGURED;
xpt_acquire_device(path->device);
done_ccb->ccb_h.func_code = XPT_GDEV_TYPE;
xpt_action(done_ccb);
xpt_async(AC_FOUND_DEVICE, path, done_ccb);
}
}
if (softc->action == PROBE_DONE || softc->action == PROBE_INVALID) {
cam_periph_invalidate(periph);
cam_periph_release_locked(periph);
}
}
Reference in New Issue View Git Blame Copy Permalink