gonzo a9ed69224e [rpi] Use compatibility string from upstream DTB for I2C controller ... FreeBSD uses upstream DTB for RPi3 build and compatibility string for i2c device is different there. Add this new string to compatibility data. Reported by: Karl Denninger MFC after: 3 days		2017-03-25 22:58:37 +00:00
..
bcm283x_dwc_fdt.c	Make BCM283x USB driver compatible with upstream DT	2016-10-12 03:07:49 +00:00
bcm2835_audio.c	[rpi] Fix bcm2835_audio locking and samples starvation	2016-12-27 19:08:08 +00:00
bcm2835_bsc.c	[rpi] Use compatibility string from upstream DTB for I2C controller	2017-03-25 22:58:37 +00:00
bcm2835_bscreg.h
bcm2835_bscvar.h	Add a mask to match only the relative base address of BSC controllers.	2015-02-16 19:06:31 +00:00
bcm2835_cpufreq.c	[rpi] rpi3 should use the same cpufreq logic as rpi2, not rpi-b	2017-03-04 17:34:36 +00:00
bcm2835_dma.c	Stop including fdt_common.h from the arm code when it's unneeded.	2016-11-14 11:41:22 +00:00
bcm2835_dma.h	Do not use DMA channels used by GPU.	2016-02-16 12:19:06 +00:00
bcm2835_fb.c	Use the correct OF_getencprop to get the height.	2016-11-16 11:31:53 +00:00
bcm2835_fbd.c	Stop including fdt_common.h from the arm code when it's unneeded.	2016-11-14 11:41:22 +00:00
bcm2835_ft5406.c	Stop including fdt_common.h from the arm code when it's unneeded.	2016-11-14 11:41:22 +00:00
bcm2835_gpio.c	Start to remove the old pre-INTRNG code from the arm platforms. These have	2016-11-08 12:15:57 +00:00
bcm2835_gpio.h
bcm2835_intr.c	Stop including fdt_common.h from the arm code when it's unneeded.	2016-11-14 11:41:22 +00:00
bcm2835_machdep.c	All armv6 platforms have the same implementation of platform_lastaddr.	2016-12-16 10:31:13 +00:00
bcm2835_mbox_prop.h	Force framebuffer virtual viewport to be the same as physical	2016-04-20 22:38:00 +00:00
bcm2835_mbox.c	Add compatibility string from upstream DT	2016-10-12 03:03:55 +00:00
bcm2835_mbox.h	Driver for CPU frequency/voltage control on the Raspberry Pi.	2014-12-20 19:15:10 +00:00
bcm2835_rng.c	Random bit generator (RBG) driver for RPi and RPi2.	2016-07-19 18:07:47 +00:00
bcm2835_sdhci.c	Add and use a MMC_DECLARE_BRIDGE macro for declaring mmc(4) bridges	2017-03-07 22:42:44 +00:00
bcm2835_spi.c	ofw_spi: Parse property for the SPI mode and CS polarity.	2016-12-18 14:54:20 +00:00
bcm2835_spireg.h
bcm2835_spivar.h
bcm2835_systimer.c	Stop including fdt_common.h from the arm code when it's unneeded.	2016-11-14 11:41:22 +00:00
bcm2835_vcbus.h	Make BRCM2837 port conform FreeBSD/ARM64 guidelines	2016-10-14 22:23:03 +00:00
bcm2835_vcio.c	Remove some NULL checks after M_WAITOK allocations from sys/arm/.	2016-08-09 16:02:35 +00:00
bcm2835_wdog.c	Add the missing void to function signatures in much of the arm code.	2016-12-13 13:43:22 +00:00
bcm2835_wdog.h
bcm2836_mp.c	Start to remove the old pre-INTRNG code from the arm platforms. These have	2016-11-08 12:15:57 +00:00
bcm2836_mp.h	RPI2: Add support for PLATFORM_SMP so we can later add it to GENERIC.	2016-09-29 06:54:02 +00:00
bcm2836.c	[rpi3] Fix SMP build for FreeBSD/arm64	2016-11-24 00:39:17 +00:00
files.bcm283x	Start to remove the old pre-INTRNG code from the arm platforms. These have	2016-11-08 12:15:57 +00:00
files.bcm2835	Build the cpufunc_asm_* files based on the cpu type, not which config file	2015-03-29 22:43:39 +00:00
files.bcm2836	Create device options for the two common ARM timers.	2015-11-21 16:23:56 +00:00
std.bcm2835	Add the SOC_BCM2835 and SOC_BCM2836 options for the arm kernel and add the	2015-03-24 18:46:01 +00:00
std.bcm2836	Remake support for SMP kernel on UP cpu:	2017-02-02 06:14:44 +00:00
std.rpi	Remove FREEBSD_BOOT_LOADER that already exists in std.armv6 config file.	2016-03-20 16:48:29 +00:00
vc_vchi_audioserv_defs.h	Add VideoCore audio driver for Rasperry Pi (BCM2835)	2015-02-08 01:12:40 +00:00